[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion metho...[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion method to evaluate the extraction rate,berberine hydrochloride content,and bacteriostatic ring diameter of the extract as comprehensive indices,and optimized the extraction process conditions of Compound Coptis Ointment using ethanol reflux.[Results]Based on the results of comprehensive indices,the optimal reflux extraction conditions for Compound Coptis Ointment were determined to be soaking in 1.5 times the amount of 70%ethanol for 2 h,followed by two extractions with 6 times the amount of 70%ethanol for 1 h each time.Three verification tests were conducted under the optimal process conditions.The yield of the extract was 28.32%±0.53%,the content of berberine hydrochloride was 4.68%±0.45%,and the diameter of the bacteriostatic ring was(2.5±0.2)cm.[Conclusions]The extract had higher drug content and exhibited better antibacterial effects.The optimized extraction process is simple,stable,and reliable,and can be effectively used to optimize the extraction process of Compound Coptis Ointment.展开更多
To provide theoretical basis and practical guidance for preparing composite rods by direct continuous casting, copper-clad aluminum composite rods of external copper layer diameter 12 mm and inner aluminum core diamet...To provide theoretical basis and practical guidance for preparing composite rods by direct continuous casting, copper-clad aluminum composite rods of external copper layer diameter 12 mm and inner aluminum core diameter 8 mm were manufactured. Orthogonal tests consisted of three factors and three levels were carried out to research the effects of melting copper temperature, continuous casting speed and nitrogen pressure on the performance of composite rods. Results showed that nitrogen pressure is the most important factor in influencing the surface quality; continuous casting speed is the most important factor in influencing copper & aluminum inter diffusion amount. Nitrogen pressure can noticeably improve the surface quality and make the rods easily be drawn out, but the surface quality does not show visible improvement when the nitrogen pressure is above 0.05 MPa. Measured by tests, the compound layer can be divided into three types according to its cladding layer degree: deficient cladding, normal cladding and excess cladding. The diameter of normal copper-clad aluminum composite rods can be successfully drawn less than 0.6 mm without annealing.展开更多
Biogas is a kind of regenerable energy which is inexpensive and friendly to the environment, but the potential of biogas is difficult to develop fully in China, for most biogas have badly qualities and the utilization...Biogas is a kind of regenerable energy which is inexpensive and friendly to the environment, but the potential of biogas is difficult to develop fully in China, for most biogas have badly qualities and the utilization of it is monotonous. The suitable operation term about biogas upgrading by pressurized water scrubbing was researched through the orthogonal test in this study. Two sorts of scrubber packing included the random multidimensional hollow sphere packing and the structured screen packing were also used, and the effects of experiment factors included packing, water temperature, gas flow speed, water flow speed and washing pressure were studied. The results showed that better effect was got when the screen structured packing was used; all the five test factors affected the processing significantly in the arrange as before and had better and better significant effects.展开更多
Aim To prepare dry powder insecticide by mixing the plant samples of Aconitum ochranthum Mey.,Aconitum hemsleyanum Pritz.and Dictamnus dasycarpus Turcz.Method The dosage ratios of the break stocks from the plants ment...Aim To prepare dry powder insecticide by mixing the plant samples of Aconitum ochranthum Mey.,Aconitum hemsleyanum Pritz.and Dictamnus dasycarpus Turcz.Method The dosage ratios of the break stocks from the plants mentioned above are installed as four factors,and three levels are selected for every factor.The test is actualized according to L 9(3 4) orthogonal array.Results An optimized recipe A 3 B 3 C 3 D 1 has been obtained after considering multifarious factors such as the resources of these plants and the water-solubility of samples.Conclusion The dry powder insecticide prepared by mixing the plant samples mentioned above as 1∶1∶1mass ratio revealed that insecticidal activities for cickets,grasshopper,aphid,and 3rd instar Mythimna separata walker are significant,respectively.展开更多
[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol ...[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol times and extraction time were investigated by HPLC-MS combined with orthogonal test to optimize extraction process using the content of monoester alkaloids( the sum of benzoyl neoaconitine,benzoyl hypoaconitine and benzoyl aconitine) as an index.[Results]The optimum ethanol extraction technology was as follows: 75% ethanol,ethanol amount 25 times of the medicinal material,and each extraction for 1. 5 h.[Conclusions] The optimal extraction technology is simple,feasible,stable and reliable. It can provide reference for the industrial production and quality control of monoester alkaloids from Radix Aconiti Preparata.展开更多
Influence of multiple structural parameters on the performance of a gun launch system driven by highpressure reactive gases is important for structural design and performance adjustment.A coupled lumped parameter mode...Influence of multiple structural parameters on the performance of a gun launch system driven by highpressure reactive gases is important for structural design and performance adjustment.A coupled lumped parameter model was utilized to predict the propellant combustion,and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel.The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS.The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments.Based on the coupled model,the influence of structural parameters of a medium-caliber gun on the system performance was investigated.In order to reduce the research costs,orthogonal tests were designed to investigate the comprehensive effects of the parameters.According to statistical analysis,the important order of the structural parameters on the launching process was obtained.The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun.The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance.展开更多
A prototype centrifugal pump with a specific speed of 110 is used to investigate and optimize the performances of a turbine for power generation.Particular attention is given to the design of the internal impeller.The...A prototype centrifugal pump with a specific speed of 110 is used to investigate and optimize the performances of a turbine for power generation.Particular attention is given to the design of the internal impeller.The internal flow field is simulated in the framework of a commercial computational fluid dynamics software(ANSYS).Four geometrical parameters of the impeller are considered,i.e.,the inlet diameter,the inlet width,the blade number,and the blade angle.The optimization is carried out on the basis of a three-level approach relying on an orthogonal test method.The results of the numerical simulations show good agreement with the experimental tests under different flow conditions.In accordance with the L9(34)design table,the head and efficiency under the rated flow rate of the nine designed schemes are calculated and processed with the method of range analysis to obtain an optimized model.展开更多
[Objectives] The research aimed to explore extraction method of Oenanthe benghalensis polysaccharide,and determine the optimal process of its ultrasonic extraction by orthogonal test. [Methods] Phenol-sulfuric acid me...[Objectives] The research aimed to explore extraction method of Oenanthe benghalensis polysaccharide,and determine the optimal process of its ultrasonic extraction by orthogonal test. [Methods] Phenol-sulfuric acid method was used to determine polysaccharide's content. Based on single-factor experiment and orthogonal test,the influences of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide were studied,and the optimal process of ultrasonic extraction was selected. [Results] The influence order of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide was A > D > B > C. Via the orthogonal test,it was determined that the optimal extraction condition of O. benghalensis polysaccharide was as below: solid-liquid ratio 1∶ 25( g/mL),extraction temperature 60℃,extraction power 80 W,extraction time 40 min. Under the condition,extraction rate of O. benghalensis polysaccharide was9. 80%. [Conclusions] The process could provide the reference basis for extracting and producing O. benghalensis polysaccharides.展开更多
[Objectives] The study aimed to optimize the extraction process of Prunellae Spica compound to provide an experimental basis for the development and utilization of the compound. [Methods]Through orthogonal test,the op...[Objectives] The study aimed to optimize the extraction process of Prunellae Spica compound to provide an experimental basis for the development and utilization of the compound. [Methods]Through orthogonal test,the optimal extraction process of Prunellae Spica compound was chosen by using the yield of dry paste and ursolic acid content as evaluation indicators. [Results]The optimal extraction process of Prunellae Spica compound is as follows: solvent dosage was 16 times,and extraction frequency was 3 times,while extraction time was 1 h.[Conclusions]The extraction process of Prunellae Spica compound was stable and feasible,and this study can provide a theoretical basis for further preparation of the compound.展开更多
[Objectives]This study aimed to optimize the preparation process of Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags.[Methods]Taking the comprehensive weighed score of total flavonoid content,soup color,ar...[Objectives]This study aimed to optimize the preparation process of Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags.[Methods]Taking the comprehensive weighed score of total flavonoid content,soup color,aroma and taste as an indicator,the preparation process of tea bags was optimized using an orthogonal test.[Results]The results of the orthogonal test show that the optimal preparation process for the Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags are as follows:particle size of 14 meshes,solid to liquid ratio of 1∶40,brewing temperature of 70℃,and brewing time of 10 min.[Conclusions]The optimized preparation process is reasonable and feasible.It is suitable for the production of Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags.展开更多
[Objectives]To optimize the extraction technology of total flavonoids component,and investigate its in vitro anti-oxidation activity.[Methods]The single factor was inspected firstly. By orthogonal experiment,the best ...[Objectives]To optimize the extraction technology of total flavonoids component,and investigate its in vitro anti-oxidation activity.[Methods]The single factor was inspected firstly. By orthogonal experiment,the best extraction conditions of total flavonoids from fruits and leaves of P. mume Sieb. et Zucc. were determined,and reducing ability of the extracted total flavonoids and its DPPH and ABTS scavenging abilities were explored. [Results] The best extraction technology conditions: solid-liquid ratio of 1∶ 50,ethanol concentration of 50%,extraction time of 2. 5 h,extraction temperature of 85 ℃,two-time extraction. By detecting DPPH and ABTS scavenging abilities of total flavonoids,the anti-oxidation activity of the total flavonoids from fruits and leaves of P. mume Sieb. et Zucc. was analyzed and evaluated. [Conclusions]Fruits and leaves of P. mume Sieb. et Zucc. had a certain in vitro anti-oxidation activity,and heat reflux extraction method of its total flavonoids had high extraction rate and simple and convenient operation,which had some practical value.展开更多
Objective It is imperative to provide some consistent experimental results for the extraction of flavonid from Fructus Gardeniae.Methods The key extraction parameters that influenced the yield of flavonid from Fructus...Objective It is imperative to provide some consistent experimental results for the extraction of flavonid from Fructus Gardeniae.Methods The key extraction parameters that influenced the yield of flavonid from Fructus Gardeniae were optimized by employing an orthogonal experiment [L9(3)4],including the ratio of buffer solution (Na2B4O7·10H2O) to raw material,concentration of Fructus Gardeniae in extracting solution,extraction time and pH of buffer solution.An UV/Vis detector was used to perform the qualitative and quantitative analyses of the extracted flavonid with the using of the standard sample.Results The maximum extraction yield of the crude extract was 5.0533 (mg/g) after 20 min when the mass ratio of Na2B4O7·10H2O to raw material was 0.4%,the concentration of Fructus Gardeniae in the extraction solution was 1/12 (g/mL),and pH of buffer solution was 4.5.The positive reactions to the Molish and HCl‐Mg tests suggested that the extracted compound was flavonoid,and FTIR measurements also identified the presence of flavonoid in the extracts.Conclusion This work is expected to provide a basis for further research,development,and utilization of Fructus gardenia in flavonid extraction.展开更多
With quercetin content and yield of dry extract as investigation indices,three factors,amount of water added,decoction time and decoction times were investigated by an orthogonal test,so as to select the optimal water...With quercetin content and yield of dry extract as investigation indices,three factors,amount of water added,decoction time and decoction times were investigated by an orthogonal test,so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times,1. 5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible,and could provide reliable reference for practical production.展开更多
To provide theoretical basis and practical guidance for preparing composite rods of external diameter no larger than 12 mm by directly continuous casting,low melting point materials of lead and tin were selected to pr...To provide theoretical basis and practical guidance for preparing composite rods of external diameter no larger than 12 mm by directly continuous casting,low melting point materials of lead and tin were selected to prepare composite rods of external diameter 12 mm and inner diameter 8 mm with air pressing core filled continuous casting process.The orthogonal tests consisting of three factors and three levels were designed to investigate the parameters of melting lead temperature,continuous casting speed and air pressure that affect the performance of the composite rods.The results show that melting lead temperature is the most important factor that influences the solid/liquid interface location;continuous casting speed is the most important factor that influences the surface quality and lead and tin inter-diffusion amount;air pressure can improve the surface quality obviously and make the rods easily drawn out,but the surface quality cannot get obvious improvement when the air pressure is above 0.03 MPa.The composite rods have excellent surface quality,obvious intermediate layer,even thick clad,and metallurgical bonding interface under the condition of melting lead temperature of 375 °C,continuous casting speed of 10 mm/min,and air pressure of 0.03 MPa.展开更多
The plasma-MIG welding torch was developed.5A06 aluminum alloys with V-grooves were welded in a single pass in the plasma-MIG welding process and the joints were examined by X-ray diffractometry analysis and mechanica...The plasma-MIG welding torch was developed.5A06 aluminum alloys with V-grooves were welded in a single pass in the plasma-MIG welding process and the joints were examined by X-ray diffractometry analysis and mechanical tests.The orthogonal experimental design was used to study the influence of plasma-MIG welding parameters on the aluminum weld porosity.The mixed orthogonal matrix L16(4 4×2 3) and analysis of variance (ANOVA)technique were employed to optimize the welding parameters.The experimental results indicate that the effect of plasma gas flow rate is dominant,the secondary factors are MIG welding voltage,welding speed,wire feed rate and plasma current in turn.Confirmation experiments were conducted under optimum conditions and there was almost no porosity in the welded joints,thus good mechanical performance joints were obtained.展开更多
This paper describes the application of orthogonal test design coupled with non-linear regression analysis to optimize abrasive suspension jet(ASJ) cutting process and construct its cutting model. Orthogonal test desi...This paper describes the application of orthogonal test design coupled with non-linear regression analysis to optimize abrasive suspension jet(ASJ) cutting process and construct its cutting model. Orthogonal test design is applied to cutting stainless steel. Through range analysis on experiment results,the optimal process conditions for the cutting depth and the kerf ratio of the bottom width to the top width can be determined. In addition,the analysis of ranges and variances are all employed to identify various factors:traverse rate,working pressure,nozzle diameter,standoff distance which denote the importance order of the cutting parameters affecting cutting depth and the kerf ratio of the bottom width to the top width. Furthermore,non-linear regression analysis is used to establish the mathematical models of the cutting parameters based on the cutting depth and the kerf ratio. Finally,the verification experiments of cutting parameters' effect on cutting performance,which show that optimized cutting parameters and cutting model can significantly improve the prediction of the cutting ability and quality of ASJ.展开更多
Through PRB simulated device and orthogonal test,we discussed the treatment effect of groundwater polluted by landfill leachate with three reaction mediums of zero-valent iron powder,activated carbon and zeolite. We c...Through PRB simulated device and orthogonal test,we discussed the treatment effect of groundwater polluted by landfill leachate with three reaction mediums of zero-valent iron powder,activated carbon and zeolite. We considered four factors of iron powder mass,activated carbon mass,particle size of iron powder and zeolite mass,and designed a two-level orthogonal test. It concluded that effluent pH appeared to fall or rise as the reaction proceeded,which changed during 7- 8. The removal rates of CODCrin eight reactors were during 60. 7%- 78. 3%,and the removal rates of NH3-N were during 34. 0%- 58. 8%. Activated carbon mass and the interaction of iron powder mass and activated carbon mass had significant influences on the removal of CODCr,while iron powder mass,particle size of iron powder and zeolite mass had insignificant influences on the removal of CODCr. Zeolite mass and activated carbon mass had significant influences on the removal of NH3,while iron powder mass,particle size of iron powder and the interaction with activated carbon mass had insignificant influences on the removal of NH3-N.展开更多
基金Supported by Key Research Project of Wuhan Municipal Health Commission(WZ21A08).
文摘[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion method to evaluate the extraction rate,berberine hydrochloride content,and bacteriostatic ring diameter of the extract as comprehensive indices,and optimized the extraction process conditions of Compound Coptis Ointment using ethanol reflux.[Results]Based on the results of comprehensive indices,the optimal reflux extraction conditions for Compound Coptis Ointment were determined to be soaking in 1.5 times the amount of 70%ethanol for 2 h,followed by two extractions with 6 times the amount of 70%ethanol for 1 h each time.Three verification tests were conducted under the optimal process conditions.The yield of the extract was 28.32%±0.53%,the content of berberine hydrochloride was 4.68%±0.45%,and the diameter of the bacteriostatic ring was(2.5±0.2)cm.[Conclusions]The extract had higher drug content and exhibited better antibacterial effects.The optimized extraction process is simple,stable,and reliable,and can be effectively used to optimize the extraction process of Compound Coptis Ointment.
基金financially supported by the Program for New Century Excellent Talents in University(NCET-12-0849)the Fundamental Research Funds for the Central Universities(13ZD12)the National Natural Science Foundation of China(No.51006034)
文摘To provide theoretical basis and practical guidance for preparing composite rods by direct continuous casting, copper-clad aluminum composite rods of external copper layer diameter 12 mm and inner aluminum core diameter 8 mm were manufactured. Orthogonal tests consisted of three factors and three levels were carried out to research the effects of melting copper temperature, continuous casting speed and nitrogen pressure on the performance of composite rods. Results showed that nitrogen pressure is the most important factor in influencing the surface quality; continuous casting speed is the most important factor in influencing copper & aluminum inter diffusion amount. Nitrogen pressure can noticeably improve the surface quality and make the rods easily be drawn out, but the surface quality does not show visible improvement when the nitrogen pressure is above 0.05 MPa. Measured by tests, the compound layer can be divided into three types according to its cladding layer degree: deficient cladding, normal cladding and excess cladding. The diameter of normal copper-clad aluminum composite rods can be successfully drawn less than 0.6 mm without annealing.
基金Supported by National Science and Technology Supporting Plan (2008BADC4B02)
文摘Biogas is a kind of regenerable energy which is inexpensive and friendly to the environment, but the potential of biogas is difficult to develop fully in China, for most biogas have badly qualities and the utilization of it is monotonous. The suitable operation term about biogas upgrading by pressurized water scrubbing was researched through the orthogonal test in this study. Two sorts of scrubber packing included the random multidimensional hollow sphere packing and the structured screen packing were also used, and the effects of experiment factors included packing, water temperature, gas flow speed, water flow speed and washing pressure were studied. The results showed that better effect was got when the screen structured packing was used; all the five test factors affected the processing significantly in the arrange as before and had better and better significant effects.
文摘Aim To prepare dry powder insecticide by mixing the plant samples of Aconitum ochranthum Mey.,Aconitum hemsleyanum Pritz.and Dictamnus dasycarpus Turcz.Method The dosage ratios of the break stocks from the plants mentioned above are installed as four factors,and three levels are selected for every factor.The test is actualized according to L 9(3 4) orthogonal array.Results An optimized recipe A 3 B 3 C 3 D 1 has been obtained after considering multifarious factors such as the resources of these plants and the water-solubility of samples.Conclusion The dry powder insecticide prepared by mixing the plant samples mentioned above as 1∶1∶1mass ratio revealed that insecticidal activities for cickets,grasshopper,aphid,and 3rd instar Mythimna separata walker are significant,respectively.
基金Supported by Traditional Chinese Medicine Science and Technology Development Program of Shandong Province (2017-1982019-0400)Major Science and Technology Innovation Project of Shandong Province (2018CXGC1304)。
文摘[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol times and extraction time were investigated by HPLC-MS combined with orthogonal test to optimize extraction process using the content of monoester alkaloids( the sum of benzoyl neoaconitine,benzoyl hypoaconitine and benzoyl aconitine) as an index.[Results]The optimum ethanol extraction technology was as follows: 75% ethanol,ethanol amount 25 times of the medicinal material,and each extraction for 1. 5 h.[Conclusions] The optimal extraction technology is simple,feasible,stable and reliable. It can provide reference for the industrial production and quality control of monoester alkaloids from Radix Aconiti Preparata.
基金the financial support from the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYLX_0399)
文摘Influence of multiple structural parameters on the performance of a gun launch system driven by highpressure reactive gases is important for structural design and performance adjustment.A coupled lumped parameter model was utilized to predict the propellant combustion,and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel.The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS.The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments.Based on the coupled model,the influence of structural parameters of a medium-caliber gun on the system performance was investigated.In order to reduce the research costs,orthogonal tests were designed to investigate the comprehensive effects of the parameters.According to statistical analysis,the important order of the structural parameters on the launching process was obtained.The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun.The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance.
基金This work was supported by the National Natural Science Foundation of China under Grant 51605200the Senior Talent Start-up Foundation of Jiangsu University under Grant 14JDG145.
文摘A prototype centrifugal pump with a specific speed of 110 is used to investigate and optimize the performances of a turbine for power generation.Particular attention is given to the design of the internal impeller.The internal flow field is simulated in the framework of a commercial computational fluid dynamics software(ANSYS).Four geometrical parameters of the impeller are considered,i.e.,the inlet diameter,the inlet width,the blade number,and the blade angle.The optimization is carried out on the basis of a three-level approach relying on an orthogonal test method.The results of the numerical simulations show good agreement with the experimental tests under different flow conditions.In accordance with the L9(34)design table,the head and efficiency under the rated flow rate of the nine designed schemes are calculated and processed with the method of range analysis to obtain an optimized model.
基金Supported by Chinese Medicine Chemistry Construction Project in"12th Fiveyear" Key Disciplines of Chinese Medicine,State Administration of Traditional Chinese Medicine(Guozhongyiyaorenjiaofa[2012]32)Pharmaceutical Chemistry Construction Project of Guangxi Key Discipline(Guijiaokeyan[2013]16)+1 种基金Construction Program of Technology Innovation Capability Upgrading Project in Guangxi Colleges and Universities(Guijiaokeyan[2015]5)Student's Platform for Innovation and Entrepreneurship Training Program in Youjiang Medical University for Nationalities in 2017(201710599110)
文摘[Objectives] The research aimed to explore extraction method of Oenanthe benghalensis polysaccharide,and determine the optimal process of its ultrasonic extraction by orthogonal test. [Methods] Phenol-sulfuric acid method was used to determine polysaccharide's content. Based on single-factor experiment and orthogonal test,the influences of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide were studied,and the optimal process of ultrasonic extraction was selected. [Results] The influence order of solid-liquid ratio( A),ultrasonic extraction temperature( B),ultrasonic power( C) and ultrasonic time( D) on extraction rate of O. benghalensis polysaccharide was A > D > B > C. Via the orthogonal test,it was determined that the optimal extraction condition of O. benghalensis polysaccharide was as below: solid-liquid ratio 1∶ 25( g/mL),extraction temperature 60℃,extraction power 80 W,extraction time 40 min. Under the condition,extraction rate of O. benghalensis polysaccharide was9. 80%. [Conclusions] The process could provide the reference basis for extracting and producing O. benghalensis polysaccharides.
基金Supported by Talent Training and Construction Project of Professor Yang Shilin’s Team in 2017(YSL17010)
文摘[Objectives] The study aimed to optimize the extraction process of Prunellae Spica compound to provide an experimental basis for the development and utilization of the compound. [Methods]Through orthogonal test,the optimal extraction process of Prunellae Spica compound was chosen by using the yield of dry paste and ursolic acid content as evaluation indicators. [Results]The optimal extraction process of Prunellae Spica compound is as follows: solvent dosage was 16 times,and extraction frequency was 3 times,while extraction time was 1 h.[Conclusions]The extraction process of Prunellae Spica compound was stable and feasible,and this study can provide a theoretical basis for further preparation of the compound.
基金Supported by Development and Research Center for China-ASEAN Traditional Medicine(05018017)Natural Science Foundation of Guangxi(2014GXNSFBA118195)
文摘[Objectives]This study aimed to optimize the preparation process of Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags.[Methods]Taking the comprehensive weighed score of total flavonoid content,soup color,aroma and taste as an indicator,the preparation process of tea bags was optimized using an orthogonal test.[Results]The results of the orthogonal test show that the optimal preparation process for the Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags are as follows:particle size of 14 meshes,solid to liquid ratio of 1∶40,brewing temperature of 70℃,and brewing time of 10 min.[Conclusions]The optimized preparation process is reasonable and feasible.It is suitable for the production of Radix Polygonum Multiflorum Preparata-Herba Taxilli tea bags.
基金Supported by 2014 Sichuan Science and Technology Support Plan Program(2014SZ0131)Education Innovation Project of Southwest Minzu University(2015)
文摘[Objectives]To optimize the extraction technology of total flavonoids component,and investigate its in vitro anti-oxidation activity.[Methods]The single factor was inspected firstly. By orthogonal experiment,the best extraction conditions of total flavonoids from fruits and leaves of P. mume Sieb. et Zucc. were determined,and reducing ability of the extracted total flavonoids and its DPPH and ABTS scavenging abilities were explored. [Results] The best extraction technology conditions: solid-liquid ratio of 1∶ 50,ethanol concentration of 50%,extraction time of 2. 5 h,extraction temperature of 85 ℃,two-time extraction. By detecting DPPH and ABTS scavenging abilities of total flavonoids,the anti-oxidation activity of the total flavonoids from fruits and leaves of P. mume Sieb. et Zucc. was analyzed and evaluated. [Conclusions]Fruits and leaves of P. mume Sieb. et Zucc. had a certain in vitro anti-oxidation activity,and heat reflux extraction method of its total flavonoids had high extraction rate and simple and convenient operation,which had some practical value.
基金supported by National Natural Science Foundation of China(No.21067004)Research Fund for the Doctoral Program of Jiangxi University of Science and Technology(22020)
文摘Objective It is imperative to provide some consistent experimental results for the extraction of flavonid from Fructus Gardeniae.Methods The key extraction parameters that influenced the yield of flavonid from Fructus Gardeniae were optimized by employing an orthogonal experiment [L9(3)4],including the ratio of buffer solution (Na2B4O7·10H2O) to raw material,concentration of Fructus Gardeniae in extracting solution,extraction time and pH of buffer solution.An UV/Vis detector was used to perform the qualitative and quantitative analyses of the extracted flavonid with the using of the standard sample.Results The maximum extraction yield of the crude extract was 5.0533 (mg/g) after 20 min when the mass ratio of Na2B4O7·10H2O to raw material was 0.4%,the concentration of Fructus Gardeniae in the extraction solution was 1/12 (g/mL),and pH of buffer solution was 4.5.The positive reactions to the Molish and HCl‐Mg tests suggested that the extracted compound was flavonoid,and FTIR measurements also identified the presence of flavonoid in the extracts.Conclusion This work is expected to provide a basis for further research,development,and utilization of Fructus gardenia in flavonid extraction.
基金Supported by Guiyang Science and Technology Planning Project(ZKHT[2017-4]21)
文摘With quercetin content and yield of dry extract as investigation indices,three factors,amount of water added,decoction time and decoction times were investigated by an orthogonal test,so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times,1. 5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible,and could provide reliable reference for practical production.
基金Project(2009AA03Z532) supported by the National High Technology Research and Development Program of ChinaProject(50774009) supported by the National Natural Science Foundation of China
文摘To provide theoretical basis and practical guidance for preparing composite rods of external diameter no larger than 12 mm by directly continuous casting,low melting point materials of lead and tin were selected to prepare composite rods of external diameter 12 mm and inner diameter 8 mm with air pressing core filled continuous casting process.The orthogonal tests consisting of three factors and three levels were designed to investigate the parameters of melting lead temperature,continuous casting speed and air pressure that affect the performance of the composite rods.The results show that melting lead temperature is the most important factor that influences the solid/liquid interface location;continuous casting speed is the most important factor that influences the surface quality and lead and tin inter-diffusion amount;air pressure can improve the surface quality obviously and make the rods easily drawn out,but the surface quality cannot get obvious improvement when the air pressure is above 0.03 MPa.The composite rods have excellent surface quality,obvious intermediate layer,even thick clad,and metallurgical bonding interface under the condition of melting lead temperature of 375 °C,continuous casting speed of 10 mm/min,and air pressure of 0.03 MPa.
文摘The plasma-MIG welding torch was developed.5A06 aluminum alloys with V-grooves were welded in a single pass in the plasma-MIG welding process and the joints were examined by X-ray diffractometry analysis and mechanical tests.The orthogonal experimental design was used to study the influence of plasma-MIG welding parameters on the aluminum weld porosity.The mixed orthogonal matrix L16(4 4×2 3) and analysis of variance (ANOVA)technique were employed to optimize the welding parameters.The experimental results indicate that the effect of plasma gas flow rate is dominant,the secondary factors are MIG welding voltage,welding speed,wire feed rate and plasma current in turn.Confirmation experiments were conducted under optimum conditions and there was almost no porosity in the welded joints,thus good mechanical performance joints were obtained.
基金supported by the Science and Technology Development Foundation of Shanghai Municipal Science and Technology Commission (Grant No.037252022)
文摘This paper describes the application of orthogonal test design coupled with non-linear regression analysis to optimize abrasive suspension jet(ASJ) cutting process and construct its cutting model. Orthogonal test design is applied to cutting stainless steel. Through range analysis on experiment results,the optimal process conditions for the cutting depth and the kerf ratio of the bottom width to the top width can be determined. In addition,the analysis of ranges and variances are all employed to identify various factors:traverse rate,working pressure,nozzle diameter,standoff distance which denote the importance order of the cutting parameters affecting cutting depth and the kerf ratio of the bottom width to the top width. Furthermore,non-linear regression analysis is used to establish the mathematical models of the cutting parameters based on the cutting depth and the kerf ratio. Finally,the verification experiments of cutting parameters' effect on cutting performance,which show that optimized cutting parameters and cutting model can significantly improve the prediction of the cutting ability and quality of ASJ.
基金Supported by Natural Science Foundation Project of Shandong Province,China(2013ZRA16006)Science Research Foundation Project of Binzhou University,China(BZXYG1108)
文摘Through PRB simulated device and orthogonal test,we discussed the treatment effect of groundwater polluted by landfill leachate with three reaction mediums of zero-valent iron powder,activated carbon and zeolite. We considered four factors of iron powder mass,activated carbon mass,particle size of iron powder and zeolite mass,and designed a two-level orthogonal test. It concluded that effluent pH appeared to fall or rise as the reaction proceeded,which changed during 7- 8. The removal rates of CODCrin eight reactors were during 60. 7%- 78. 3%,and the removal rates of NH3-N were during 34. 0%- 58. 8%. Activated carbon mass and the interaction of iron powder mass and activated carbon mass had significant influences on the removal of CODCr,while iron powder mass,particle size of iron powder and zeolite mass had insignificant influences on the removal of CODCr. Zeolite mass and activated carbon mass had significant influences on the removal of NH3,while iron powder mass,particle size of iron powder and the interaction with activated carbon mass had insignificant influences on the removal of NH3-N.
基金This research was supported by Ministry of Agriculture Public Welfare Industry （Agriculture） Research （No. 201203092 ＆ No. 201303077）, Guangxi Natural Science Foundation （Grant No. 2014GXNSFAA118110, 2014GXNSFDA118013）, Foundation of Fundamental Research Project from Guangxi Academy of Agricultural Sciences （Grant No. 2014YQ05）.
