Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation reactions.The bimetallic hydroxides,catalyzing the oxygen e...Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation reactions.The bimetallic hydroxides,catalyzing the oxygen evolution reaction(OER),have significant research potential because hydroxide reconstruction to generate an active phase is a remarkable advantage.Herein,the complete reconstruction of ultrathin CoNi(OH)_(2) nanosheets was achieved by embedding Ag nanoparticles into the hydroxide to induce a spontaneous redox reaction(SRR),forming heterojunction Ag@CoNi(OH)_(2) for bifunctional hydrolysis.Theoretical calculations and in situ Raman and ex situ characterizations revealed that the inductive effect of the Ag cation redistributed the charge to promote phase transformation to highly activate Ag-modified hydroxides.The Co-Ni dual sites in Co/NiOOH serve as novel active sites for optimizing the intermediates,thereby weakening the barrier formed by OOH^*.Ag@CoNi(OH)_(2) required a potential of 1.55 V to drive water splitting at a current density of 10 mA cm^(-2),with nearly 98.6% Faraday efficiency.Through ion induction and triggering of electron regulation in the OER via the synergistic action of the heterogeneous interface and surface reconstruction,this strategic design can overcome the limited capacity of bimetallic hydroxides and bridge the gap between the basic theory and industrialization of water decomposition.展开更多
Various land use and land cover(LULC)products have been produced over the past decade with the development of remote sensing technology.Despite the differences in LULC classification schemes,there is a lack of researc...Various land use and land cover(LULC)products have been produced over the past decade with the development of remote sensing technology.Despite the differences in LULC classification schemes,there is a lack of research on assessing the accuracy of their application to croplands in a unified framework.Thus,this study evaluated the spatial and area accuracies of cropland classification for four commonly used global LULC products(i.e.,MCD12Q1V6,GlobCover2009,FROM-GLC and GlobeLand30)based on the harmonised FAO criterion,and quantified the relationships between four factors(i.e.,slope,elevation,field size and crop system)and cropland classification agreement.The validation results indicated that MCD12Q1 and GlobeLand30 performed well in cropland classification regarding spatial consistency,with overall accuracies of 94.90 and 93.52%,respectively.The FROMGLC showed the worst performance,with an overall accuracy of 83.17%.Overlaying the cropland generated by the four global LULC products,we found the proportions of complete agreement and disagreement were 15.51 and 44.72% for the cropland classification,respectively.High consistency was mainly observed in the Northeast China Plain,the Huang-Huai-Hai Plain and the northern part of the Middle-lower Yangtze Plain,China.In contrast,low consistency was detected primarily on the eastern edge of the northern and semiarid region,the Yunnan-Guizhou Plateau and southern China.Field size was the most important factor for mapping cropland.For area accuracy,compared with China Statistical Yearbook data at the provincial scale,the accuracies of different products in descending order were:GlobeLand30,FROM-GLC,MCD12Q1,and GlobCover2009.The cropland classification schemes mainly caused large area deviations among the four products,and they also resulted in the different ranks of spatial accuracy and area accuracy among the four products.Our results can provide valuable suggestions for selecting cropland products at the national or provincial scale and help cropland mapping and reconstruction,which is essential for food security and crop management,so they can also contribute to achieving the Sustainable Development Goals issued by the United Nations.展开更多
BACKGROUND Helicobacter pylori(H.pylori)infection has been well-established as a significant risk factor for several gastrointestinal disorders.The urea breath test(UBT)has emerged as a leading non-invasive method for...BACKGROUND Helicobacter pylori(H.pylori)infection has been well-established as a significant risk factor for several gastrointestinal disorders.The urea breath test(UBT)has emerged as a leading non-invasive method for detecting H.pylori.Despite numerous studies confirming its substantial accuracy,the reliability of UBT results is often compromised by inherent limitations.These findings underscore the need for a rigorous statistical synthesis to clarify and reconcile the diagnostic accuracy of the UBT for the diagnosis of H.pylori infection.AIM To determine and compare the diagnostic accuracy of 13C-UBT and 14C-UBT for H.pylori infection in adult patients with dyspepsia.METHODS We conducted an independent search of the PubMed/MEDLINE,EMBASE,and Cochrane Central databases until April 2022.Our search included diagnostic accuracy studies that evaluated at least one of the index tests(^(13)C-UBT or ^(14)C-UBT)against a reference standard.We used the QUADAS-2 tool to assess the methodo-logical quality of the studies.We utilized the bivariate random-effects model to calculate sensitivity,specificity,positive and negative test likelihood ratios(LR+and LR-),as well as the diagnostic odds ratio(DOR),and their 95%confidence intervals.We conducted subgroup analyses based on urea dosing,time after urea administration,and assessment technique.To investigate a possible threshold effect,we conducted Spearman correlation analysis,and we generated summary receiver operating characteristic(SROC)curves to assess heterogeneity.Finally,we visually inspected a funnel plot and used Egger’s test to evaluate publication bias.endorsing both as reliable diagnostic tools in clinical practice.CONCLUSION In summary,our study has demonstrated that ^(13)C-UBT has been found to outperform the ^(14)C-UBT,making it the preferred diagnostic approach.Additionally,our results emphasize the significance of carefully considering urea dosage,assessment timing,and measurement techniques for both tests to enhance diagnostic precision.Nevertheless,it is crucial for researchers and clinicians to evaluate the strengths and limitations of our findings before implementing them in practice.展开更多
Electrocatalytic water splitting is crucial for H2generation via hydrogen evolution reaction(HER)but subject to the sluggish dynamics of oxygen evolution reaction(OER).In this work,single Fe atomdoped MoS_(2)nanosheet...Electrocatalytic water splitting is crucial for H2generation via hydrogen evolution reaction(HER)but subject to the sluggish dynamics of oxygen evolution reaction(OER).In this work,single Fe atomdoped MoS_(2)nanosheets(SFe-DMNs)were prepared based on the high-throughput density functional theory(DFT)calculation screening.Due to the synergistic effect between Fe atom and MoS_(2)and optimized intermediate binding energy,the SFe-DMNs could deliver outstanding activity for both HER and OER.When assembled into a two-electrode electrolytic cell,the SFe-DMNs could achieve the current density of 50 mA cm^(-2)at a low cell voltage of 1.55 V under neutral condition.These results not only confirmed the effectiveness of high-throughput screening,but also revealed the excellent activity and thus the potential applications in fuel cells of SFe-DMNs.展开更多
Electrocatalytic overall water splitting(OWS),a pivotal approach in addressing the global energy crisis,aims to produce hydrogen and oxygen.However,most of the catalysts in powder form are adhesively bounding to the e...Electrocatalytic overall water splitting(OWS),a pivotal approach in addressing the global energy crisis,aims to produce hydrogen and oxygen.However,most of the catalysts in powder form are adhesively bounding to the electrodes,resulting in catalyst detachment by bubble generation and other uncertain interference,and eventually reducing the OWS performance.To surmount this challenge,we synthesized a hybrid material of Co_(3)S_(4)-pyrolysis lotus fiber(labeled as Co_(3)S_(4)-p LF)textile by hydrothermal and hightemperature pyrolysis processes for electrocatalytic OWS.Owing to the natural LF textile exposing the uniformly distributed functional groups(AOH,ANH_(2),etc.)to anchor Co_(3)S_(4)nanoparticles with hierarchical porous structure and outstanding hydrophily,the hybrid Co_(3)S_(4)-p LF catalyst shows low overpotentials at 10 m A cm^(-2)(η_(10,HER)=100 m Vη_(10,OER)=240 mV)alongside prolonged operational stability during electrocatalytic reactions.Theoretical calculations reveal that the electron transfer from p LF to Co_(3)S_(4)in the hybrid Co_(3)S_(4)-p LF is beneficial to the electrocatalytic process.This work will shed light on the development of nature-inspired carbon-based materials in hybrid electrocatalysts for OWS.展开更多
BACKGROUND Gastric cancer(GC)is prevalent and aggressive,especially when patients have distant lung metastases,which often places patients into advanced stages.By identifying prognostic variables for lung metastasis i...BACKGROUND Gastric cancer(GC)is prevalent and aggressive,especially when patients have distant lung metastases,which often places patients into advanced stages.By identifying prognostic variables for lung metastasis in GC patients,it may be po-ssible to construct a good prediction model for both overall survival(OS)and the cumulative incidence prediction(CIP)plot of the tumour.AIM To investigate the predictors of GC with lung metastasis(GCLM)to produce nomograms for OS and generate CIP by using cancer-specific survival(CSS)data.METHODS Data from January 2000 to December 2020 involving 1652 patients with GCLM were obtained from the Surveillance,epidemiology,and end results program database.The major observational endpoint was OS;hence,patients were se-parated into training and validation groups.Correlation analysis determined va-rious connections.Univariate and multivariate Cox analyses validated the independent predictive factors.Nomogram distinction and calibration were performed with the time-dependent area under the curve(AUC)and calibration curves.To evaluate the accuracy and clinical usefulness of the nomograms,decision curve analysis(DCA)was performed.The clinical utility of the novel prognostic model was compared to that of the 7th edition of the American Joint Committee on Cancer(AJCC)staging system by utilizing Net Reclassification Improvement(NRI)and Integrated Discrimination Improvement(IDI).Finally,the OS prognostic model and Cox-AJCC risk stratification model modified for the AJCC system were compared.RESULTS For the purpose of creating the OS nomogram,a CIP plot based on CSS was generated.Cox multivariate regression analysis identified eleven significant prognostic factors(P<0.05)related to liver metastasis,bone metastasis,primary site,surgery,regional surgery,treatment sequence,chemotherapy,radiotherapy,positive lymph node count,N staging,and time from diagnosis to treatment.It was clear from the DCA(net benefit>0),time-de-pendent ROC curve(training/validation set AUC>0.7),and calibration curve(reliability slope closer to 45 degrees)results that the OS nomogram demonstrated a high level of predictive efficiency.The OS prediction model(New Model AUC=0.83)also performed much better than the old Cox-AJCC model(AUC difference between the new model and the old model greater than 0)in terms of risk stratification(P<0.0001)and verification using the IDI and NRI.CONCLUSION The OS nomogram for GCLM successfully predicts 1-and 3-year OS.Moreover,this approach can help to ap-propriately classify patients into high-risk and low-risk groups,thereby guiding treatment.展开更多
BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychologi...BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychological problems.AIM To investigate the effectiveness of the initial check,information exchange,final accuracy check,reaction(IIFAR)information care model on the mental health status of elderly patients with lung cancer.METHODS This study is a single-centre study.We randomly recruited 60 elderly patients with lung cancer who attended our hospital from January 2021 to January 2022.These elderly patients with lung cancer were randomly divided into two groups,with the control group taking the conventional propaganda and education and the observation group taking the IIFAR information care model based on the conventional care protocol.The differences in psychological distress,anxiety and depression,life quality,fatigue,and the locus of control in psychology were compared between these two groups,and the causes of psychological distress were analyzed.RESULTS After the intervention,Distress Thermometer,Hospital Anxiety and Depression Scale(HADS)for anxiety and the HADS for depression,Revised Piper’s Fatigue Scale,and Chance Health Locus of Control scores were lower in the observation group compared to the pre-intervention period in the same group and were significantly lower in the observation group compared to those of the control group(P<0.05).After the intervention,Quality of Life Questionnaire Core 30(QLQ-C30),Internal Health Locus of Control,and Powerful Others Health Locus of Control scores were significantly higher in the observation and the control groups compared to the pre-intervention period in their same group,and QLQ-C30 scores were significantly higher in the observation group compared to those of the control group(P<0.05).CONCLUSION The IIFAR information care model can help elderly patients with lung cancer by reducing their anxiety and depression,psychological distress,and fatigue,improving their tendencies on the locus of control in psychology,and enhancing their life qualities.展开更多
Objective: To analyze the accuracy of serum prealbumin levels in predicting the prognosis of patients with critical respiratory illness. Methods: Fifty patients with critical respiratory illness admitted to our hospit...Objective: To analyze the accuracy of serum prealbumin levels in predicting the prognosis of patients with critical respiratory illness. Methods: Fifty patients with critical respiratory illness admitted to our hospital from October 2022 to September 2023 were selected and divided into an observation group and a control group after condition assessment, with 25 cases in each group. The results of cholinesterase (ChE), prealbumin (PALB), albumin (ALB), aspartate aminotransferase (AST), total protein (TP), and forced expiratory volume (FEV1)/Predicted (Pred) of the two groups were measured. Results: The ChE levels of the observation group were lower than those of the control group, while the PALB and ALB levels of the observation group were higher than those of the control group (P < 0.05). The AST, TP, and FEV1 /Pred levels of the observation group were higher than those in the control group (P < 0.05). Conclusion: Serum PALB levels can be used as the main indicator for prognosis in critically ill respiratory patients.展开更多
The sluggish kinetics of both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)generate the large overpotential in water electrolysis and thus high-cost hydrogen production.Here,multidimensional nanop...The sluggish kinetics of both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)generate the large overpotential in water electrolysis and thus high-cost hydrogen production.Here,multidimensional nanoporous interpenetrating-phase FeNiZn alloy and FeNi_(3)intermetallic heterostructure is in situ constructed on NiFe foam(FeNiZn/FeNi_(3)@NiFe)by dealloying protocol.Coupling with the eminent synergism among specific constituents and the highly efficient mass transport from integrated porous backbone,FeNiZn/FeNi_(3)@NiFe depicts exceptional bifunctional activities for water splitting with extremely low overpotentials toward OER and HER(η_(1000)=367/245 mV)as well as the robust durability during the 400 h testing in alkaline solution.The as-built water electrolyzer with FeNiZn/FeNi_(3)@NiFe as both anode and cathode exhibits record-high performances for sustainable hydrogen output in terms of much lower cell voltage of 1.759 and 1.919 V to deliver the current density of 500 and 1000 mA cm^(-2)as well long working lives.Density functional theory calculations disclose that the interface interaction between FeNiZn alloy and FeNi_(3)intermetallic generates the modulated electron structure state and optimized intermediate chemisorption,thus diminishing the energy barriers for hydrogen production in water splitting.With the merits of fine performances,scalable fabrication,and low cost,FeNiZn/FeNi_(3)@NiFe holds prospective application potential as the bifunctional electrocatalyst for water splitting.展开更多
Electrocatalytic oxygen evolution reaction(OER)has been recognized as the bottleneck of overall water splitting,which is a promising approach for sustainable production of H_(2).Transition metal(TM)hydroxides are the ...Electrocatalytic oxygen evolution reaction(OER)has been recognized as the bottleneck of overall water splitting,which is a promising approach for sustainable production of H_(2).Transition metal(TM)hydroxides are the most conventional and classical non-noble metal-based electrocatalysts for OER,while TM basic salts[M^(2+)(OH)_(2-x)(A_(m^(-))_(x/m),A=CO_(3)^(2−),NO_(3)^(−),F^(−),Cl^(−)]consisting of OH−and another anion have drawn extensive research interest due to its higher catalytic activity in the past decade.In this review,we summarize the recent advances of TM basic salts and their application in OER and further overall water splitting.We categorize TM basic salt-based OER pre-catalysts into four types(CO_(3)^(2−),NO_(3)^(−),F^(−),Cl^(−)according to the anion,which is a key factor for their outstanding performance towards OER.We highlight experimental and theoretical methods for understanding the structure evolution during OER and the effect of anion on catalytic performance.To develop bifunctional TM basic salts as catalyst for the practical electrolysis application,we also review the present strategies for enhancing its hydrogen evolution reaction activity and thereby improving its overall water splitting performance.Finally,we conclude this review with a summary and perspective about the remaining challenges and future opportunities of TM basic salts as catalysts for water electrolysis.展开更多
The electronic structures and properties of electrocatalysts,which depend on the physicochemical structure and metallic element components,could significantly affect their electrocatalytic performance and their future...The electronic structures and properties of electrocatalysts,which depend on the physicochemical structure and metallic element components,could significantly affect their electrocatalytic performance and their future applications in Zn-air battery(ZAB)and overall water splitting(OWS).Here,by combining vacancies and heterogeneous interfacial engineering,three-dimensional(3D)core-shell NiCoP/NiO heterostructures with dominated oxygen vacancies have been controllably in-situ grown on carbon cloth for using as highly efficient electrocatalysts toward hydrogen and oxygen electrochemical reactions.Theoretical calculation and electrochemical results manifest that the hybridization of NiCoP core with NiO shell produces a strong synergistic electronic coupling effect.The oxygen vacancy can enable the emergence of new electronic states within the band gap,crossing the Fermi levels of the two spin components and optimizing the local electronic structure.Besides,the hierarchical core-shell NiCoP/NiO nanoarrays also endow the catalysts with multiple exposed active sites,faster mass transfer behavior,optimized electronic strutures and improved electrochemical performance during ZAB and OWS applications.展开更多
Background:Proprioceptive accuracy refers to the individual’s ability to perceive proprioceptive information,that is,the information referring to the actual state of the locomotor system,which originates from mechano...Background:Proprioceptive accuracy refers to the individual’s ability to perceive proprioceptive information,that is,the information referring to the actual state of the locomotor system,which originates from mechanoreceptors located in various parts of the locomotor system and from tactile receptors located in the skin.Proprioceptive accuracy appears to be an important aspect in the evaluation of sensorimotor functioning;however,no widely accepted standard assessment exists.In this systematic review,our goal was to identify and categorize different methods that are used to assess different aspects of proprioceptive accuracy.Methods:A literature search was conducted in 5 different databases(PubMed,SPORTDiscus,PsycINFO,ScienceDirect,and SpringerLink).Results:Overall,1139 scientific papers reporting 1346 methods were included in this review.The methods assess 8 different aspects of proprioception:(a)the perception of joint position,(b)movement and movement extent,(c)trajectory,(d)velocity,and the sense of(e)force,(f)muscle tension,(g)weight,and(h)size.They apply various paradigms of psychophysics(i.e.,the method of adjustment,constant stimuli,and limits).Conclusion:As the outcomes of different tasks with respect to various body parts show no associations(i.e.,proprioceptive accuracy is characterized by site-specificity and method-specificity),the appropriate measurement method for the task needs to be chosen based on theoretical considerations and/or ecological validity.展开更多
The overall carbonation of MgO-admixed soil provides not only an efficient and environmentally friendly technique for improving soft ground but also a permanently safe solution for CO_(2) sequestration.To evaluate the...The overall carbonation of MgO-admixed soil provides not only an efficient and environmentally friendly technique for improving soft ground but also a permanently safe solution for CO_(2) sequestration.To evaluate the carbon sequestration potential and promote the carbonation application in soil improvement,a laboratory-scale model investigation is designed under pressurized carbonation considering the influences of MgO dosage and CO_(2) ventilation mode(way).The temperature,dynamic resilience modulus,and dynamic cone penetration(DCP)were tested to assess the carbonation treatment effect.The physical,strength,and microscopic tests were also undertaken to reveal the evolution mechanisms of CO_(2) migration in the MgO-carbonated foundation.The results indicate that the temperature peaks of MgO-treated foundation emerge at w20 h during hydration,but occur at a distance of 0e25 cm from the gas source within 6 h during carbonation.The dynamic resilience moduli of the model foundation increase by more than two times after carbonation and the DCP indices reduce dramatically.As the distance from the gas inlet increases,the bearing capacity,strength,and carbon sequestration decrease,whereas the moisture content increases.Compared to the end ventilation,the middle ventilation produces a higher carbonation degree and a wider carbonation area.The cementation and filling of nesquehonite and dypingite/hydromagnesite are verified to be critical factors for carbonation evolution and enhancing mechanical performances.Finally,the overall carbonation model is described schematically in three stages of CO_(2) migration.The outcomes would help to facilitate the practical application of CO_(2) sequestration in soil treatment.展开更多
The application of continuous natural fibers as reinforcement in composite thin-walled structures offers a feasible approach to achieve light weight and high strength while remaining environmentally friendly.In additi...The application of continuous natural fibers as reinforcement in composite thin-walled structures offers a feasible approach to achieve light weight and high strength while remaining environmentally friendly.In addition,additive manufacturing technology provides a favorable process foundation for its realization.In this study,the printability and energy absorption properties of 3D printed continuous fiber reinforced thin-walled structures with different configurations were investigated.The results suggested that a low printing speed and a proper layer thickness would mitigate the printing defects within the structures.The printing geometry accuracy of the structures could be further improved by rounding the sharp corners with appropriate radii.This study successfully fabricated structures with vari-ous configurations characterized by high geometric accuracy through printing parameters optimization and path smoothing.Moreover,the compressive property and energy absorption characteristics of the structures under quasi-static axial compression were evaluated and compared.It was found that all studied thin-walled structures exhibited progressive folding deformation patterns during compression.In particular,energy absorption process was achieved through the combined damage modes of plastic deformation,fiber pullout and delamination.Furthermore,the com-parison results showed that the hexagonal structure exhibited the best energy absorption performance.The study revealed the structure-mechanical property relationship of 3D printed continuous fiber reinforced composite thin-walled structures through the analysis of multiscale failure characteristics and load response,which is valuable for broadening their applications.展开更多
Objective:To assess the concordance of tumour grade in specimens obtained from diagnostic cystoscopic biopsy and transurethral resection of bladder tumour(TURBT)and explore the risk factors of upgrading.Methods:The me...Objective:To assess the concordance of tumour grade in specimens obtained from diagnostic cystoscopic biopsy and transurethral resection of bladder tumour(TURBT)and explore the risk factors of upgrading.Methods:The medical records of 205 outpatients who underwent diagnostic cystoscopic biopsy before initial TURBT were retrospectively reviewed.Comparative analysis of the tumour grade of biopsy and operation specimens was performed.Tumour grade changing from low-grade to high-grade with or without variant histology was defined as upgrading.Logistic regression an-alyses were performed to identify the risk factors of upgrading.Results:For the 205 patients,the concordance of tumour grade between specimens obtained from biopsy and operation was 0.639.The concordance for patients who were preoperatively diagnosed with low-grade and high-grade was 0.504 and 0.912,respectively.Univariate and multivariate logistic regression analyses showed that older age,tumour multifocality,high neutrophil-to-lymphocyte ratio(NLR),platelet-to-lymphocyte ratio(PLR),and low lymphocyte-to-monocyte ratio(LMR)were significantly associated with upgrading(odds ratio ranging from 0.412 to 4.364).The area under the curve of the different multivariate models was improved from 0.752 to 0.821,and decision curve analysis demonstrated a high net benefit when NLR,LMR,and PLR were added.Conclusion:Diagnostic cystoscopic biopsy may not accurately represent the true grade of primary bladder cancer,especially for outpatients with low-grade bladder cancer.Moreover,older age,tumour multifocality,high NLR,PLR,and low LMR are risk factors of upgrading,and systemic inflammatory markers improve the predictive ability.展开更多
MXene,the two-dimensional transition metal carbide or nitride material,was first discovered in 2011.They possess superior characteristics such as stability,electric conductivity,and electrochemical properties,that mak...MXene,the two-dimensional transition metal carbide or nitride material,was first discovered in 2011.They possess superior characteristics such as stability,electric conductivity,and electrochemical properties,that make them attract the attention of the energy engineering field.Overall water splitting which generates hydrogen and oxygen,not only serves as a clean energy supply technology but also demonstrates the capacity for redistribution and integration of renewable energy.MXene based non-noble metal has demonstrated significant potential in terms of cost-effectiveness.Therefore,the current focus is implementing targeted regulation at the micro level to render it effective comparable to the precious metals.In this context,the mechanisms of the hydrogen evolution reaction(HER) and the oxygen evolution reaction(OER) under the influence of MXene can be elucidated in terms of electron and ion transfer processes,hydrogen coverage,and regulation of terminal groups.Certainly,the composition,structure,synthesis,and stability strategies of MXene are the subjects of comprehensive investigation from both theoretical calculations using density functional theory(DFT) and experimental perspectives.In addition,this review provides a comprehensive summary of MXene based non-noble metal and various modification methods.These methods encompass doping,vacancy engineering,hybrid structures,heterojunction formation,multi-scale engineering,surface engineering,and phase engineering.The review also presents suggestions for designing high-performance MXene based on non-noble metals.It offers guidance on employing construction strategies for electrocatalysts.By leveraging the unique properties and tunability of MXene and implementing these modification methods,researchers can enhance the catalytic activity,stability,selectivity,and efficiency of MXene based non-noble metal catalysts.展开更多
In this work the performance of a screening analytical method for Energy Dispersive X-Ray Fluorescence (EDXRF) analysis in terms of accuracy and precision was evaluated through analysis of rock standard reference mate...In this work the performance of a screening analytical method for Energy Dispersive X-Ray Fluorescence (EDXRF) analysis in terms of accuracy and precision was evaluated through analysis of rock standard reference materials. The method allowed the division of elements into four groups taking into account the excitation energies and measurement conditions of the sample. Two standard reference materials were used and 15 sample replicates were prepared and analyzed, then statistics were applied to assess the precision and accuracy of analytical results. The obtained results show that major compounds or elements (SiO<sub>2</sub>, P<sub>2</sub>O<sub>5</sub>, K<sub>2</sub>O, CaO, Fe<sub>2</sub>O<sub>3</sub>, Ti) can be determined in fine powder sample with a deviation lower than 15%, and a relative standard deviation in the range (1 - 10)%. The deviation was found to be lower than 5% for major compounds such as K<sub>2</sub>O, and CaO, which suggest that the EDXRF is accurate in evaluating major elemental concentrations in rock samples. It was also found that the method seems to be more accurate and precise for major elements than for trace element investigation. This screening analytical method can be used for routine analysis with acceptable results, even though the method should be optimized to increase its precision and accuracy.展开更多
The Riemann wave system has a fundamental role in describing waves in various nonlinear natural phenomena,for instance,tsunamis in the oceans.This paper focuses on executing the generalized exponential rational functi...The Riemann wave system has a fundamental role in describing waves in various nonlinear natural phenomena,for instance,tsunamis in the oceans.This paper focuses on executing the generalized exponential rational function approach and some numerical methods to obtain a distinct range of traveling wave structures and numerical results of the two-dimensional Riemann problems.The stability of obtained traveling wave solutions is analyzed by satisfying the constraint conditions of the Hamiltonian system.Numerical simulations are investigated via the finite difference method to verify the accuracy of the obtained results.To extract the approximation solutions to the underlying problem,some ODE solvers in FORTRAN software are applied,and outcomes are shown graphically.The stability and accuracy of the numerical schemes using Fourier’s stabilitymethod and error analysis,respectively,to increase the reassurance are investigated.A comparison between the analytical and numerical results is obtained and graphically provided.The proposed methods are effective and practical to be applied for solving more partial differential equations(PDEs).展开更多
Background: Accurate determination of gestational age has become important for deciding the appropriate time for termination of the pregnancy as well as to monitor the fetal growth during the entire period of pregnanc...Background: Accurate determination of gestational age has become important for deciding the appropriate time for termination of the pregnancy as well as to monitor the fetal growth during the entire period of pregnancy. Objective: The aim of the study was to assess whether the trans-cerebellar diameter, placental thickness or combining both of them is more accurate for assessment of gestational age in the 3<sup>rd</sup> trimester of pregnancy. Patients and Methods: This is a cross sectional study conducted at outpatient Clinic and Obstetric ward, Ain Shams University Maternity Hospital, over a period of six months from March 2019 to September 2019. One hundred pregnant women were recruited according to inclusion criteria either from outpatient clinic or were admitted in obstetric ward Ain Shams Maternity Hospital to find out the most accurate fetal biometric measurement in the third trimester either trans-cerebellar diameter placental thickness or both compared to reliable LMP (last menstrual period) dates confirmed by crown rump length (CRL) in the first trimester. Results: Trans-cerebellar diameter mean ± SD was 46.0 ± 3.5 with range 38.2 - 51.7. The mean of placental thickness was 39.6 ± 7.1 with range 22.8 - 54.3. Placental thickness had highest determination (0.813) for last menstrual period followed by trans-cerebellar diameter (0.802). Combining trans-cerebellar diameter and placental thickness increased determination (0.902) for last menstrual period. Conclusion: Combined use of trans-cerebellar diameter and placental thickness in the third trimester of pregnancy is a reliable indicator for gestational age in women whose last menstrual period is unreliable or unknown, but placental thickness had higher accuracy than trans-cerebellar diameter.展开更多
The Global Positioning System(GPS)is a GNSS constellation,but GNSS is not always GPS.GPS is one of the GNSS constellations used around the world.The GNSS constellations include GPS(US),QZSS(Japan),Beidou/BDS(China),Ga...The Global Positioning System(GPS)is a GNSS constellation,but GNSS is not always GPS.GPS is one of the GNSS constellations used around the world.The GNSS constellations include GPS(US),QZSS(Japan),Beidou/BDS(China),Galileo(EU),and GLONASS(Russia).In 1999,the European Commission(EC)proposed the European Galileo satellite navigation system for the first time.A four-phase development was proposed,including public and private sector finance.Galileo was intended for both civilian and government use,and is managed and controlled by civil authorities.Galileo is made up of 30 satellites,a number of globally distributed ground stations,and a ground control and monitoring system,all of which are extremely similar to the structure,format,and layout of GPS.In this study,we investigate GPS/GLONASS/Galileo/Beidou/IRNSS/QZSS Navigation Satellite System integration algorithm for long baselines ranging from 1500 km to 3000 km in China,Japan and Mongolia.The positioning performance with GPS/GLONASS/Galileo/BDS/IRNSS/QZSS,GPS-only,Galileo-only,GLONASS-only and BDS-only,etc.is compared in terms of the positioning accuracy.An improvement of positioning accuracy over long baselines can be found with GPS/GLONASS/Galileo/BDS/QZSS/IRNSS compared with that of GPS-only and that of BDS-only.The obtained differences of the two baselines(Topcon Magnet Tools Software(Multi-GNSS)-(CSRS-PPP(GPS/GLONASS),(Trimble-RTX(GPS/GLONASS),(AUSPOS(GPS/GLONASS))Online Processing Software)by using GPS/GLONASS/Galileo/BDS/QZSS/IRNSS signals is between 40 cm and 111.5 cm on three days.展开更多
基金supported by the Inner Mongolia R&D Program Plan(2021ZD0042,2021EEDSCXSFQZD006)the National Natural Science Foundation of China(21902123)the Natural Science Basic Research Program of Shaanxi(2023-JC-ZD-22)。
文摘Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation reactions.The bimetallic hydroxides,catalyzing the oxygen evolution reaction(OER),have significant research potential because hydroxide reconstruction to generate an active phase is a remarkable advantage.Herein,the complete reconstruction of ultrathin CoNi(OH)_(2) nanosheets was achieved by embedding Ag nanoparticles into the hydroxide to induce a spontaneous redox reaction(SRR),forming heterojunction Ag@CoNi(OH)_(2) for bifunctional hydrolysis.Theoretical calculations and in situ Raman and ex situ characterizations revealed that the inductive effect of the Ag cation redistributed the charge to promote phase transformation to highly activate Ag-modified hydroxides.The Co-Ni dual sites in Co/NiOOH serve as novel active sites for optimizing the intermediates,thereby weakening the barrier formed by OOH^*.Ag@CoNi(OH)_(2) required a potential of 1.55 V to drive water splitting at a current density of 10 mA cm^(-2),with nearly 98.6% Faraday efficiency.Through ion induction and triggering of electron regulation in the OER via the synergistic action of the heterogeneous interface and surface reconstruction,this strategic design can overcome the limited capacity of bimetallic hydroxides and bridge the gap between the basic theory and industrialization of water decomposition.
基金supported by the National Key Research and Development Program of China(2022YFB3903503)the National Natural Science Foundation of China(U1901601)the Science and Technology Project of the Department of Education of Jiangxi Province,China(GJJ210541)。
文摘Various land use and land cover(LULC)products have been produced over the past decade with the development of remote sensing technology.Despite the differences in LULC classification schemes,there is a lack of research on assessing the accuracy of their application to croplands in a unified framework.Thus,this study evaluated the spatial and area accuracies of cropland classification for four commonly used global LULC products(i.e.,MCD12Q1V6,GlobCover2009,FROM-GLC and GlobeLand30)based on the harmonised FAO criterion,and quantified the relationships between four factors(i.e.,slope,elevation,field size and crop system)and cropland classification agreement.The validation results indicated that MCD12Q1 and GlobeLand30 performed well in cropland classification regarding spatial consistency,with overall accuracies of 94.90 and 93.52%,respectively.The FROMGLC showed the worst performance,with an overall accuracy of 83.17%.Overlaying the cropland generated by the four global LULC products,we found the proportions of complete agreement and disagreement were 15.51 and 44.72% for the cropland classification,respectively.High consistency was mainly observed in the Northeast China Plain,the Huang-Huai-Hai Plain and the northern part of the Middle-lower Yangtze Plain,China.In contrast,low consistency was detected primarily on the eastern edge of the northern and semiarid region,the Yunnan-Guizhou Plateau and southern China.Field size was the most important factor for mapping cropland.For area accuracy,compared with China Statistical Yearbook data at the provincial scale,the accuracies of different products in descending order were:GlobeLand30,FROM-GLC,MCD12Q1,and GlobCover2009.The cropland classification schemes mainly caused large area deviations among the four products,and they also resulted in the different ranks of spatial accuracy and area accuracy among the four products.Our results can provide valuable suggestions for selecting cropland products at the national or provincial scale and help cropland mapping and reconstruction,which is essential for food security and crop management,so they can also contribute to achieving the Sustainable Development Goals issued by the United Nations.
基金Supported by Scientific Initiation Scholarship Programme(PIBIC)of the Bahia State Research Support Foundationthe Doctorate Scholarship Program of the Coordination of Improvement of Higher Education Personnel+1 种基金the Scientific Initiation Scholarship Programme(PIBIC)of the National Council for Scientific and Technological Developmentand the CNPq Research Productivity Fellowship.
文摘BACKGROUND Helicobacter pylori(H.pylori)infection has been well-established as a significant risk factor for several gastrointestinal disorders.The urea breath test(UBT)has emerged as a leading non-invasive method for detecting H.pylori.Despite numerous studies confirming its substantial accuracy,the reliability of UBT results is often compromised by inherent limitations.These findings underscore the need for a rigorous statistical synthesis to clarify and reconcile the diagnostic accuracy of the UBT for the diagnosis of H.pylori infection.AIM To determine and compare the diagnostic accuracy of 13C-UBT and 14C-UBT for H.pylori infection in adult patients with dyspepsia.METHODS We conducted an independent search of the PubMed/MEDLINE,EMBASE,and Cochrane Central databases until April 2022.Our search included diagnostic accuracy studies that evaluated at least one of the index tests(^(13)C-UBT or ^(14)C-UBT)against a reference standard.We used the QUADAS-2 tool to assess the methodo-logical quality of the studies.We utilized the bivariate random-effects model to calculate sensitivity,specificity,positive and negative test likelihood ratios(LR+and LR-),as well as the diagnostic odds ratio(DOR),and their 95%confidence intervals.We conducted subgroup analyses based on urea dosing,time after urea administration,and assessment technique.To investigate a possible threshold effect,we conducted Spearman correlation analysis,and we generated summary receiver operating characteristic(SROC)curves to assess heterogeneity.Finally,we visually inspected a funnel plot and used Egger’s test to evaluate publication bias.endorsing both as reliable diagnostic tools in clinical practice.CONCLUSION In summary,our study has demonstrated that ^(13)C-UBT has been found to outperform the ^(14)C-UBT,making it the preferred diagnostic approach.Additionally,our results emphasize the significance of carefully considering urea dosage,assessment timing,and measurement techniques for both tests to enhance diagnostic precision.Nevertheless,it is crucial for researchers and clinicians to evaluate the strengths and limitations of our findings before implementing them in practice.
基金supported by the Research Funds of Institute of Zhejiang University-Quzhou(IZQ2023RCZX032)the Natural Science Foundation of Guangdong Province(2022A1515010185)+1 种基金the Fundamental Research Funds for the Central Universities(FRF-TP-20-005A3)partially supported by the Special Funds for Postdoctoral Research at Tsinghua University(100415017)。
文摘Electrocatalytic water splitting is crucial for H2generation via hydrogen evolution reaction(HER)but subject to the sluggish dynamics of oxygen evolution reaction(OER).In this work,single Fe atomdoped MoS_(2)nanosheets(SFe-DMNs)were prepared based on the high-throughput density functional theory(DFT)calculation screening.Due to the synergistic effect between Fe atom and MoS_(2)and optimized intermediate binding energy,the SFe-DMNs could deliver outstanding activity for both HER and OER.When assembled into a two-electrode electrolytic cell,the SFe-DMNs could achieve the current density of 50 mA cm^(-2)at a low cell voltage of 1.55 V under neutral condition.These results not only confirmed the effectiveness of high-throughput screening,but also revealed the excellent activity and thus the potential applications in fuel cells of SFe-DMNs.
基金supported by the Scientific Research Foundation of Hunan Provincial Education Department,China(22B0893)the Scientific Research Foundation of Hunan Provincial Education Department,China(20A060)。
文摘Electrocatalytic overall water splitting(OWS),a pivotal approach in addressing the global energy crisis,aims to produce hydrogen and oxygen.However,most of the catalysts in powder form are adhesively bounding to the electrodes,resulting in catalyst detachment by bubble generation and other uncertain interference,and eventually reducing the OWS performance.To surmount this challenge,we synthesized a hybrid material of Co_(3)S_(4)-pyrolysis lotus fiber(labeled as Co_(3)S_(4)-p LF)textile by hydrothermal and hightemperature pyrolysis processes for electrocatalytic OWS.Owing to the natural LF textile exposing the uniformly distributed functional groups(AOH,ANH_(2),etc.)to anchor Co_(3)S_(4)nanoparticles with hierarchical porous structure and outstanding hydrophily,the hybrid Co_(3)S_(4)-p LF catalyst shows low overpotentials at 10 m A cm^(-2)(η_(10,HER)=100 m Vη_(10,OER)=240 mV)alongside prolonged operational stability during electrocatalytic reactions.Theoretical calculations reveal that the electron transfer from p LF to Co_(3)S_(4)in the hybrid Co_(3)S_(4)-p LF is beneficial to the electrocatalytic process.This work will shed light on the development of nature-inspired carbon-based materials in hybrid electrocatalysts for OWS.
基金Supported by Peng-Cheng Talent-Medical Young Reserve Talent Training Program,No.XWRCHT20220002Xuzhou City Health and Health Commission Technology Project Contract,No.XWKYHT20230081and Key Research and Development Plan Project of Xuzhou City,No.KC22179.
文摘BACKGROUND Gastric cancer(GC)is prevalent and aggressive,especially when patients have distant lung metastases,which often places patients into advanced stages.By identifying prognostic variables for lung metastasis in GC patients,it may be po-ssible to construct a good prediction model for both overall survival(OS)and the cumulative incidence prediction(CIP)plot of the tumour.AIM To investigate the predictors of GC with lung metastasis(GCLM)to produce nomograms for OS and generate CIP by using cancer-specific survival(CSS)data.METHODS Data from January 2000 to December 2020 involving 1652 patients with GCLM were obtained from the Surveillance,epidemiology,and end results program database.The major observational endpoint was OS;hence,patients were se-parated into training and validation groups.Correlation analysis determined va-rious connections.Univariate and multivariate Cox analyses validated the independent predictive factors.Nomogram distinction and calibration were performed with the time-dependent area under the curve(AUC)and calibration curves.To evaluate the accuracy and clinical usefulness of the nomograms,decision curve analysis(DCA)was performed.The clinical utility of the novel prognostic model was compared to that of the 7th edition of the American Joint Committee on Cancer(AJCC)staging system by utilizing Net Reclassification Improvement(NRI)and Integrated Discrimination Improvement(IDI).Finally,the OS prognostic model and Cox-AJCC risk stratification model modified for the AJCC system were compared.RESULTS For the purpose of creating the OS nomogram,a CIP plot based on CSS was generated.Cox multivariate regression analysis identified eleven significant prognostic factors(P<0.05)related to liver metastasis,bone metastasis,primary site,surgery,regional surgery,treatment sequence,chemotherapy,radiotherapy,positive lymph node count,N staging,and time from diagnosis to treatment.It was clear from the DCA(net benefit>0),time-de-pendent ROC curve(training/validation set AUC>0.7),and calibration curve(reliability slope closer to 45 degrees)results that the OS nomogram demonstrated a high level of predictive efficiency.The OS prediction model(New Model AUC=0.83)also performed much better than the old Cox-AJCC model(AUC difference between the new model and the old model greater than 0)in terms of risk stratification(P<0.0001)and verification using the IDI and NRI.CONCLUSION The OS nomogram for GCLM successfully predicts 1-and 3-year OS.Moreover,this approach can help to ap-propriately classify patients into high-risk and low-risk groups,thereby guiding treatment.
文摘BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychological problems.AIM To investigate the effectiveness of the initial check,information exchange,final accuracy check,reaction(IIFAR)information care model on the mental health status of elderly patients with lung cancer.METHODS This study is a single-centre study.We randomly recruited 60 elderly patients with lung cancer who attended our hospital from January 2021 to January 2022.These elderly patients with lung cancer were randomly divided into two groups,with the control group taking the conventional propaganda and education and the observation group taking the IIFAR information care model based on the conventional care protocol.The differences in psychological distress,anxiety and depression,life quality,fatigue,and the locus of control in psychology were compared between these two groups,and the causes of psychological distress were analyzed.RESULTS After the intervention,Distress Thermometer,Hospital Anxiety and Depression Scale(HADS)for anxiety and the HADS for depression,Revised Piper’s Fatigue Scale,and Chance Health Locus of Control scores were lower in the observation group compared to the pre-intervention period in the same group and were significantly lower in the observation group compared to those of the control group(P<0.05).After the intervention,Quality of Life Questionnaire Core 30(QLQ-C30),Internal Health Locus of Control,and Powerful Others Health Locus of Control scores were significantly higher in the observation and the control groups compared to the pre-intervention period in their same group,and QLQ-C30 scores were significantly higher in the observation group compared to those of the control group(P<0.05).CONCLUSION The IIFAR information care model can help elderly patients with lung cancer by reducing their anxiety and depression,psychological distress,and fatigue,improving their tendencies on the locus of control in psychology,and enhancing their life qualities.
文摘Objective: To analyze the accuracy of serum prealbumin levels in predicting the prognosis of patients with critical respiratory illness. Methods: Fifty patients with critical respiratory illness admitted to our hospital from October 2022 to September 2023 were selected and divided into an observation group and a control group after condition assessment, with 25 cases in each group. The results of cholinesterase (ChE), prealbumin (PALB), albumin (ALB), aspartate aminotransferase (AST), total protein (TP), and forced expiratory volume (FEV1)/Predicted (Pred) of the two groups were measured. Results: The ChE levels of the observation group were lower than those of the control group, while the PALB and ALB levels of the observation group were higher than those of the control group (P < 0.05). The AST, TP, and FEV1 /Pred levels of the observation group were higher than those in the control group (P < 0.05). Conclusion: Serum PALB levels can be used as the main indicator for prognosis in critically ill respiratory patients.
基金supported by National Science Foundation of China(52201254)Shandong Province(ZR2020MB090,ZR2020QE012)the project of“20 Items of University”of Jinan(202228046)。
文摘The sluggish kinetics of both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)generate the large overpotential in water electrolysis and thus high-cost hydrogen production.Here,multidimensional nanoporous interpenetrating-phase FeNiZn alloy and FeNi_(3)intermetallic heterostructure is in situ constructed on NiFe foam(FeNiZn/FeNi_(3)@NiFe)by dealloying protocol.Coupling with the eminent synergism among specific constituents and the highly efficient mass transport from integrated porous backbone,FeNiZn/FeNi_(3)@NiFe depicts exceptional bifunctional activities for water splitting with extremely low overpotentials toward OER and HER(η_(1000)=367/245 mV)as well as the robust durability during the 400 h testing in alkaline solution.The as-built water electrolyzer with FeNiZn/FeNi_(3)@NiFe as both anode and cathode exhibits record-high performances for sustainable hydrogen output in terms of much lower cell voltage of 1.759 and 1.919 V to deliver the current density of 500 and 1000 mA cm^(-2)as well long working lives.Density functional theory calculations disclose that the interface interaction between FeNiZn alloy and FeNi_(3)intermetallic generates the modulated electron structure state and optimized intermediate chemisorption,thus diminishing the energy barriers for hydrogen production in water splitting.With the merits of fine performances,scalable fabrication,and low cost,FeNiZn/FeNi_(3)@NiFe holds prospective application potential as the bifunctional electrocatalyst for water splitting.
基金supported by the financial support from Natural Science Foundation of China(Nos.21871065,22209129 and 22071038)High-Level Innovation and Entrepreneurship(QCYRCXM-2022-123)+1 种基金support from the“Young Talent Support Plan”of Xi’an Jiaotong University(HG6J024)“Young Talent Lift Plan”of Xi’an city(095920221352).
文摘Electrocatalytic oxygen evolution reaction(OER)has been recognized as the bottleneck of overall water splitting,which is a promising approach for sustainable production of H_(2).Transition metal(TM)hydroxides are the most conventional and classical non-noble metal-based electrocatalysts for OER,while TM basic salts[M^(2+)(OH)_(2-x)(A_(m^(-))_(x/m),A=CO_(3)^(2−),NO_(3)^(−),F^(−),Cl^(−)]consisting of OH−and another anion have drawn extensive research interest due to its higher catalytic activity in the past decade.In this review,we summarize the recent advances of TM basic salts and their application in OER and further overall water splitting.We categorize TM basic salt-based OER pre-catalysts into four types(CO_(3)^(2−),NO_(3)^(−),F^(−),Cl^(−)according to the anion,which is a key factor for their outstanding performance towards OER.We highlight experimental and theoretical methods for understanding the structure evolution during OER and the effect of anion on catalytic performance.To develop bifunctional TM basic salts as catalyst for the practical electrolysis application,we also review the present strategies for enhancing its hydrogen evolution reaction activity and thereby improving its overall water splitting performance.Finally,we conclude this review with a summary and perspective about the remaining challenges and future opportunities of TM basic salts as catalysts for water electrolysis.
基金financially supported by the National Natural Science Foundation of China(No.22179014,21603019)program for the Hundred Talents Program of Chongqing University。
文摘The electronic structures and properties of electrocatalysts,which depend on the physicochemical structure and metallic element components,could significantly affect their electrocatalytic performance and their future applications in Zn-air battery(ZAB)and overall water splitting(OWS).Here,by combining vacancies and heterogeneous interfacial engineering,three-dimensional(3D)core-shell NiCoP/NiO heterostructures with dominated oxygen vacancies have been controllably in-situ grown on carbon cloth for using as highly efficient electrocatalysts toward hydrogen and oxygen electrochemical reactions.Theoretical calculation and electrochemical results manifest that the hybridization of NiCoP core with NiO shell produces a strong synergistic electronic coupling effect.The oxygen vacancy can enable the emergence of new electronic states within the band gap,crossing the Fermi levels of the two spin components and optimizing the local electronic structure.Besides,the hierarchical core-shell NiCoP/NiO nanoarrays also endow the catalysts with multiple exposed active sites,faster mass transfer behavior,optimized electronic strutures and improved electrochemical performance during ZAB and OWS applications.
基金supported by the UNKP-20-3 New National Excellence Program of the Ministry for Innovation and Technology from the source of the National Research,Development and Innovation Fund(úNKP-20-3-Ⅱ-ELTE-163)supported by the Fonds voor Wetenschappelijk Onderzoek—Vlaanderen(FWO)Research Foundation Flanders(11M2622N)the Special Research Fund(Het Bijzonder Onderzoeksfonds,BOF)of Hasselt University(BOF19KP08)。
文摘Background:Proprioceptive accuracy refers to the individual’s ability to perceive proprioceptive information,that is,the information referring to the actual state of the locomotor system,which originates from mechanoreceptors located in various parts of the locomotor system and from tactile receptors located in the skin.Proprioceptive accuracy appears to be an important aspect in the evaluation of sensorimotor functioning;however,no widely accepted standard assessment exists.In this systematic review,our goal was to identify and categorize different methods that are used to assess different aspects of proprioceptive accuracy.Methods:A literature search was conducted in 5 different databases(PubMed,SPORTDiscus,PsycINFO,ScienceDirect,and SpringerLink).Results:Overall,1139 scientific papers reporting 1346 methods were included in this review.The methods assess 8 different aspects of proprioception:(a)the perception of joint position,(b)movement and movement extent,(c)trajectory,(d)velocity,and the sense of(e)force,(f)muscle tension,(g)weight,and(h)size.They apply various paradigms of psychophysics(i.e.,the method of adjustment,constant stimuli,and limits).Conclusion:As the outcomes of different tasks with respect to various body parts show no associations(i.e.,proprioceptive accuracy is characterized by site-specificity and method-specificity),the appropriate measurement method for the task needs to be chosen based on theoretical considerations and/or ecological validity.
基金funding provided by the National Science Foundation of China(Grant No.41902286)the Open Fund for the State Key Laboratory of Geomechanics and Geotechnical Engineering(Grant No.SKLGME021029)the CRSRI Open Research Program(Grant No.CKWV20221015/KY).
文摘The overall carbonation of MgO-admixed soil provides not only an efficient and environmentally friendly technique for improving soft ground but also a permanently safe solution for CO_(2) sequestration.To evaluate the carbon sequestration potential and promote the carbonation application in soil improvement,a laboratory-scale model investigation is designed under pressurized carbonation considering the influences of MgO dosage and CO_(2) ventilation mode(way).The temperature,dynamic resilience modulus,and dynamic cone penetration(DCP)were tested to assess the carbonation treatment effect.The physical,strength,and microscopic tests were also undertaken to reveal the evolution mechanisms of CO_(2) migration in the MgO-carbonated foundation.The results indicate that the temperature peaks of MgO-treated foundation emerge at w20 h during hydration,but occur at a distance of 0e25 cm from the gas source within 6 h during carbonation.The dynamic resilience moduli of the model foundation increase by more than two times after carbonation and the DCP indices reduce dramatically.As the distance from the gas inlet increases,the bearing capacity,strength,and carbon sequestration decrease,whereas the moisture content increases.Compared to the end ventilation,the middle ventilation produces a higher carbonation degree and a wider carbonation area.The cementation and filling of nesquehonite and dypingite/hydromagnesite are verified to be critical factors for carbonation evolution and enhancing mechanical performances.Finally,the overall carbonation model is described schematically in three stages of CO_(2) migration.The outcomes would help to facilitate the practical application of CO_(2) sequestration in soil treatment.
基金Supported by National Natural Science Foundation of China(Grant Nos.51905555,52105523)Hu-Xiang Youth Talent Program of China(Grant No.2020RC3009)Innovation-Driven Project of Central South University of China(Grant No.2019CX017).
文摘The application of continuous natural fibers as reinforcement in composite thin-walled structures offers a feasible approach to achieve light weight and high strength while remaining environmentally friendly.In addition,additive manufacturing technology provides a favorable process foundation for its realization.In this study,the printability and energy absorption properties of 3D printed continuous fiber reinforced thin-walled structures with different configurations were investigated.The results suggested that a low printing speed and a proper layer thickness would mitigate the printing defects within the structures.The printing geometry accuracy of the structures could be further improved by rounding the sharp corners with appropriate radii.This study successfully fabricated structures with vari-ous configurations characterized by high geometric accuracy through printing parameters optimization and path smoothing.Moreover,the compressive property and energy absorption characteristics of the structures under quasi-static axial compression were evaluated and compared.It was found that all studied thin-walled structures exhibited progressive folding deformation patterns during compression.In particular,energy absorption process was achieved through the combined damage modes of plastic deformation,fiber pullout and delamination.Furthermore,the com-parison results showed that the hexagonal structure exhibited the best energy absorption performance.The study revealed the structure-mechanical property relationship of 3D printed continuous fiber reinforced composite thin-walled structures through the analysis of multiscale failure characteristics and load response,which is valuable for broadening their applications.
基金This study was supported by the Clinical Research Award of the First Affiliated Hospital of Xi'an Jiaotong University,China(No.XJTU1AF-CRF-2015-002 to DH).
文摘Objective:To assess the concordance of tumour grade in specimens obtained from diagnostic cystoscopic biopsy and transurethral resection of bladder tumour(TURBT)and explore the risk factors of upgrading.Methods:The medical records of 205 outpatients who underwent diagnostic cystoscopic biopsy before initial TURBT were retrospectively reviewed.Comparative analysis of the tumour grade of biopsy and operation specimens was performed.Tumour grade changing from low-grade to high-grade with or without variant histology was defined as upgrading.Logistic regression an-alyses were performed to identify the risk factors of upgrading.Results:For the 205 patients,the concordance of tumour grade between specimens obtained from biopsy and operation was 0.639.The concordance for patients who were preoperatively diagnosed with low-grade and high-grade was 0.504 and 0.912,respectively.Univariate and multivariate logistic regression analyses showed that older age,tumour multifocality,high neutrophil-to-lymphocyte ratio(NLR),platelet-to-lymphocyte ratio(PLR),and low lymphocyte-to-monocyte ratio(LMR)were significantly associated with upgrading(odds ratio ranging from 0.412 to 4.364).The area under the curve of the different multivariate models was improved from 0.752 to 0.821,and decision curve analysis demonstrated a high net benefit when NLR,LMR,and PLR were added.Conclusion:Diagnostic cystoscopic biopsy may not accurately represent the true grade of primary bladder cancer,especially for outpatients with low-grade bladder cancer.Moreover,older age,tumour multifocality,high NLR,PLR,and low LMR are risk factors of upgrading,and systemic inflammatory markers improve the predictive ability.
基金supported by National Natural Science Foundation of China (Grant No. 22279091)。
文摘MXene,the two-dimensional transition metal carbide or nitride material,was first discovered in 2011.They possess superior characteristics such as stability,electric conductivity,and electrochemical properties,that make them attract the attention of the energy engineering field.Overall water splitting which generates hydrogen and oxygen,not only serves as a clean energy supply technology but also demonstrates the capacity for redistribution and integration of renewable energy.MXene based non-noble metal has demonstrated significant potential in terms of cost-effectiveness.Therefore,the current focus is implementing targeted regulation at the micro level to render it effective comparable to the precious metals.In this context,the mechanisms of the hydrogen evolution reaction(HER) and the oxygen evolution reaction(OER) under the influence of MXene can be elucidated in terms of electron and ion transfer processes,hydrogen coverage,and regulation of terminal groups.Certainly,the composition,structure,synthesis,and stability strategies of MXene are the subjects of comprehensive investigation from both theoretical calculations using density functional theory(DFT) and experimental perspectives.In addition,this review provides a comprehensive summary of MXene based non-noble metal and various modification methods.These methods encompass doping,vacancy engineering,hybrid structures,heterojunction formation,multi-scale engineering,surface engineering,and phase engineering.The review also presents suggestions for designing high-performance MXene based on non-noble metals.It offers guidance on employing construction strategies for electrocatalysts.By leveraging the unique properties and tunability of MXene and implementing these modification methods,researchers can enhance the catalytic activity,stability,selectivity,and efficiency of MXene based non-noble metal catalysts.
文摘In this work the performance of a screening analytical method for Energy Dispersive X-Ray Fluorescence (EDXRF) analysis in terms of accuracy and precision was evaluated through analysis of rock standard reference materials. The method allowed the division of elements into four groups taking into account the excitation energies and measurement conditions of the sample. Two standard reference materials were used and 15 sample replicates were prepared and analyzed, then statistics were applied to assess the precision and accuracy of analytical results. The obtained results show that major compounds or elements (SiO<sub>2</sub>, P<sub>2</sub>O<sub>5</sub>, K<sub>2</sub>O, CaO, Fe<sub>2</sub>O<sub>3</sub>, Ti) can be determined in fine powder sample with a deviation lower than 15%, and a relative standard deviation in the range (1 - 10)%. The deviation was found to be lower than 5% for major compounds such as K<sub>2</sub>O, and CaO, which suggest that the EDXRF is accurate in evaluating major elemental concentrations in rock samples. It was also found that the method seems to be more accurate and precise for major elements than for trace element investigation. This screening analytical method can be used for routine analysis with acceptable results, even though the method should be optimized to increase its precision and accuracy.
文摘The Riemann wave system has a fundamental role in describing waves in various nonlinear natural phenomena,for instance,tsunamis in the oceans.This paper focuses on executing the generalized exponential rational function approach and some numerical methods to obtain a distinct range of traveling wave structures and numerical results of the two-dimensional Riemann problems.The stability of obtained traveling wave solutions is analyzed by satisfying the constraint conditions of the Hamiltonian system.Numerical simulations are investigated via the finite difference method to verify the accuracy of the obtained results.To extract the approximation solutions to the underlying problem,some ODE solvers in FORTRAN software are applied,and outcomes are shown graphically.The stability and accuracy of the numerical schemes using Fourier’s stabilitymethod and error analysis,respectively,to increase the reassurance are investigated.A comparison between the analytical and numerical results is obtained and graphically provided.The proposed methods are effective and practical to be applied for solving more partial differential equations(PDEs).
文摘Background: Accurate determination of gestational age has become important for deciding the appropriate time for termination of the pregnancy as well as to monitor the fetal growth during the entire period of pregnancy. Objective: The aim of the study was to assess whether the trans-cerebellar diameter, placental thickness or combining both of them is more accurate for assessment of gestational age in the 3<sup>rd</sup> trimester of pregnancy. Patients and Methods: This is a cross sectional study conducted at outpatient Clinic and Obstetric ward, Ain Shams University Maternity Hospital, over a period of six months from March 2019 to September 2019. One hundred pregnant women were recruited according to inclusion criteria either from outpatient clinic or were admitted in obstetric ward Ain Shams Maternity Hospital to find out the most accurate fetal biometric measurement in the third trimester either trans-cerebellar diameter placental thickness or both compared to reliable LMP (last menstrual period) dates confirmed by crown rump length (CRL) in the first trimester. Results: Trans-cerebellar diameter mean ± SD was 46.0 ± 3.5 with range 38.2 - 51.7. The mean of placental thickness was 39.6 ± 7.1 with range 22.8 - 54.3. Placental thickness had highest determination (0.813) for last menstrual period followed by trans-cerebellar diameter (0.802). Combining trans-cerebellar diameter and placental thickness increased determination (0.902) for last menstrual period. Conclusion: Combined use of trans-cerebellar diameter and placental thickness in the third trimester of pregnancy is a reliable indicator for gestational age in women whose last menstrual period is unreliable or unknown, but placental thickness had higher accuracy than trans-cerebellar diameter.
文摘The Global Positioning System(GPS)is a GNSS constellation,but GNSS is not always GPS.GPS is one of the GNSS constellations used around the world.The GNSS constellations include GPS(US),QZSS(Japan),Beidou/BDS(China),Galileo(EU),and GLONASS(Russia).In 1999,the European Commission(EC)proposed the European Galileo satellite navigation system for the first time.A four-phase development was proposed,including public and private sector finance.Galileo was intended for both civilian and government use,and is managed and controlled by civil authorities.Galileo is made up of 30 satellites,a number of globally distributed ground stations,and a ground control and monitoring system,all of which are extremely similar to the structure,format,and layout of GPS.In this study,we investigate GPS/GLONASS/Galileo/Beidou/IRNSS/QZSS Navigation Satellite System integration algorithm for long baselines ranging from 1500 km to 3000 km in China,Japan and Mongolia.The positioning performance with GPS/GLONASS/Galileo/BDS/IRNSS/QZSS,GPS-only,Galileo-only,GLONASS-only and BDS-only,etc.is compared in terms of the positioning accuracy.An improvement of positioning accuracy over long baselines can be found with GPS/GLONASS/Galileo/BDS/QZSS/IRNSS compared with that of GPS-only and that of BDS-only.The obtained differences of the two baselines(Topcon Magnet Tools Software(Multi-GNSS)-(CSRS-PPP(GPS/GLONASS),(Trimble-RTX(GPS/GLONASS),(AUSPOS(GPS/GLONASS))Online Processing Software)by using GPS/GLONASS/Galileo/BDS/QZSS/IRNSS signals is between 40 cm and 111.5 cm on three days.
