We collected high-quality teleseismic events recorded by 12 broadband seismographs deployed in the Anyuan Coal Mine and its adjacent areas in Pingxiang City,Jiangxi Province for nearly two years.The H-κ-c stacking me...We collected high-quality teleseismic events recorded by 12 broadband seismographs deployed in the Anyuan Coal Mine and its adjacent areas in Pingxiang City,Jiangxi Province for nearly two years.The H-κ-c stacking method was employed to obtain the crustal thickness and Poisson's ratio distribution,then the characteristics of crustal structure below the stations were obtained by using the time-domain linear inversion method.The crustal thickness in the Anyuan Coal Mine and its adjacent areas ranges from approximately 32~35 km,with an average thickness of 33 km,which is consistent with the crustal thickness results in South China from previous studies using the receiver function method.The average Poisson's ratio of the crustal bulk composition in the study area varies between 0.22 and 0.25,which is lower than the global value with a 0.27 average,indicating a predominantly intermediate-acidic or felsic crustal composition.There is a weak negative correlation between Poisson's ratio and crustal thickness estimates in the Anyuan Coal Mine and its adjacent areas,suggesting that the absence of mafic-ultramafic materials in the lower crust is associated with the process of crustal delamination.The velocity inversion results indicate that the crustal structure including three velocity discontinuity interfaces,with the first at a depth of approximately 1.5 km,the second at about 10~15 km,and the third being the Moho.The study also indicates that the results obtained by the H-κ-c stacking method are significantly better than those obtained by the H-κmethod,effectively reducing the standard deviation and dispersion of crustal thickness and vP/vSratio.展开更多
Lithospheric structure beneath the northeastern Qinghai-Xizang Plateau is of vital significance for studying the geodynamic processes of crustal thickening and expansion of the Qinghai-Xizang Plateau. We conducted a j...Lithospheric structure beneath the northeastern Qinghai-Xizang Plateau is of vital significance for studying the geodynamic processes of crustal thickening and expansion of the Qinghai-Xizang Plateau. We conducted a joint inversion of receiver functions and surface wave dispersions with P-wave velocity constraints using data from the Chin Array Ⅱ temporary stations deployed across the Qinghai-Xizang Plateau. Prior to joint inversion, we applied the H-κ-c method(Li JT et al., 2019) to the receiver function data in order to correct for the back-azimuthal variations in the arrival times of Ps phases and crustal multiples caused by crustal anisotropy and dipping interfaces. High-resolution images of vS, crustal thickness, and vP/vSstructures in the Qinghai-Xizang Plateau were simultaneously derived from the joint inversion. The seismic images reveal that crustal thickness decreases outward from the Qinghai-Xizang Plateau. The stable interiors of the Ordos and Alxa blocks exhibited higher velocities and lower crustal vP/vSratios. While, lower velocities and higher vP/vSratios were observed beneath the Qilian Orogen and Songpan-Ganzi terrane(SPGZ), which are geologically active and mechanically weak, especially in the mid-lower crust.Delamination or thermal erosion of the lithosphere triggered by hot asthenospheric flow contributes to the observed uppermost mantle low-velocity zones(LVZs) in the SPGZ. The crustal thickness, vS, and vP/vSratios suggest that whole lithospheric shortening is a plausible mechanism for crustal thickening in the Qinghai-Xizang Plateau, supporting the idea of coupled lithospheric-scale deformation in this region.展开更多
The Tian Shan is a vast range that spans several countries in Asia.Understanding its evolutionary history may provide valuable insights into intracontinental orogenic dynamics.In this study,we explored the crustal cha...The Tian Shan is a vast range that spans several countries in Asia.Understanding its evolutionary history may provide valuable insights into intracontinental orogenic dynamics.In this study,we explored the crustal characteristics of the Tian Shan and their relationships to the tectonic evolution of the region.A new H-stacking method that combines the P receiver function and gravity anomalies was used to estimate the thickness and ratio of P-to S-wave velocities(Vp/Vs)for 91 broadband seismic stations in the central and western Tian Shan.Our results revealed significant lateral variations in crustal thickness and Vp/Vs.A—45-km-thick crust and an intermediate-high Vp/Vs(-1.74-1.84)were found in the Kazakh Shield and Tarim Basin,which we interpreted to indicate a mafic crystalline basement and lower crust.The central Tian Shan varied greatly in crustal thickness(40-64 km)and Vp/Vs ratio(1.65-2.00).which may be due to crustal shortening,mafic underplating,and crustal melting.In contrast,we observed a relatively thin crust(42-50 km)with an intermediate Vp/Vs ratio(-1.78)in the western Tian Shan.The differences in the crustal structures between the western and central Tian Shan imply that the Talas-Fergana Fault may be trans-lithospheric.展开更多
Teleseismic P-wave receiver functions at 20 broadband seismic stations in the Longmenshan fault zone (LMFZ) and its vicinity were extracted, and the crustal thickness and the P- and S-wave velocity ratio were calculat...Teleseismic P-wave receiver functions at 20 broadband seismic stations in the Longmenshan fault zone (LMFZ) and its vicinity were extracted, and the crustal thickness and the P- and S-wave velocity ratio were calculated by use of the H-k stacking algorithm. With the results as constraints, the S-wave ve-locity structures beneath each station were determined by the inversion of receiver functions. The crustal structure of the Rear-range zone is similar to that of the Songpan-Garze Block, whereas the velocity structure of the Fore-range zone resembles that of Sichuan Basin, implying that the Central Principal Fault of LMFZ is the boundary between the eastern Tibetan Plateau and the Yangtze Block. Lower velocity zone exists in lower crust of the Songpan-Garze Block and the central-southern seg-ment of the Rear-range zone, which facilitates the detachment of the material in upper and middle crust. Joint analysis of the receiver functions and the Bouguer gravity anomalies supports the thesis on the detachment-thrust mode of the LMFZ. A double-detachment pattern is suggested to the tectonic setting in the Songpan-Garze Block. The upper detachment occurs at the depth of 10-15 km, and represents a high-temperature ductile shear zone. There is a lower detachment at the depth of about 30 km, below which the lower crust flow exists in the eastern Tibetan Plateau. Interpretation of the Bouguer gravity anomalies indicates that the Sichuan Basin is of higher density in upper and middle crust in compari-son with that of the Songpan-Garze Block. The LMFZ with higher density is the result from the thrusting of the Songpan-Garze Block over the Sichuan Basin. In the lower crust, higher P velocity and higher density in the Sichuan Basin are related to more rigid material, while lower S velocity and lower density in the Songpan-Garze Block are related to the softened and weakened material. The higher density block beneath the Sichuan Basin obstructs the eastward flow of lower crustal material from the Tibetan Plateau, which is driven by the compression of northward movement of Indian Plate. The eastward movement of upper and middle crustal material is also obstructed by the rigid Yangtze Block, resulting in the stress concentrated and accumulated along the LMFZ. When the stress releases sharply, the Wenchuan Ms8.0 earthquake occurs.展开更多
We analyzed a total of 37 427 receiver-function data recorded by national and regional broadband seismic networks of the China Earthquake Administration to study the mantle transition zone beneath eastern and central ...We analyzed a total of 37 427 receiver-function data recorded by national and regional broadband seismic networks of the China Earthquake Administration to study the mantle transition zone beneath eastern and central China. Significant topography on both the 410-km and 660-km discontinuities was clearly imaged in the 3D volume of CCP （common-conversion-point） stacked images that cover an area of 102.5°F-122.5°E and 22.0°N-42.0°N. 3D crustal and mantle velocity models were used in computing the Ps time moveouts to better image the absolute depths of the two discontinuities. We found that the 660-km discontinuity is depressed up to 25 km along the east coast of China, indicating the presence of the subducted Pacific slab in the region. More interestingly, a double 660-km was observed beneath the Huanghai Sea, which was not seen from the 410-km discontinuity. We found a strong and localized anomaly beneath the Quaternary Datong volcano located at the northeastern edge of the Ordos Plateau in North China. The 410-km is depressed by as much as 15 km beneath the volcano. If the amount of the depression is caused by unmodeled low velocity anomaly in the upper mantle, it requires either a strong （4%-8%） localized low velocity anomaly near the lithosphere-asthenosphere boundary or -1.5% low velocity column across the entire upper mantle above the 410-km. The latter could suggest a deep origin of the Datong volcano, although it was usually attributed to edge-driven convection by most of the literatures.展开更多
The teleseismic receiver functions of digital seismic network of Ningxia and its adjacent area are calculated with two different Gauss filter factors. The accuracy and stability of the receiver functions are discussed...The teleseismic receiver functions of digital seismic network of Ningxia and its adjacent area are calculated with two different Gauss filter factors. The accuracy and stability of the receiver functions are discussed. The h-k stacking method is applied to estimate the crustal thickness and velocity ratio beneath seismic stations. The results indicate that there are sharp changes of crustal thickness and velocity ratio in the studied region. This region is located in the northeastern margin of Tibet, and also a junction of several first-grade blocks. The large contrast of crustal structure in this region is considered to be resulted from the interaction of these blocks. Our results are helpful to construct the completed model of the formation and evolution of the Tibet. Some local structures are also discussed combining with the geological faults.展开更多
The Binchuan region is located in a seismically active area in northwestern Yunnan,China.The detailed crustal structure is important to understand the tectonic evolution and to assess the seismic hazard in the study a...The Binchuan region is located in a seismically active area in northwestern Yunnan,China.The detailed crustal structure is important to understand the tectonic evolution and to assess the seismic hazard in the study area.With a 2-D dense array deployed in this region,we use teleseismic receiver function traditional imaging methods,including the H-κand common-conversion-point stacking methods,to derive high-resolution crustal thickness and vP/vS ratio maps.Our results indicate that the crustal thickness increases from~40 km to~46 km in the south-north direction,and the average crustal thickness beneath the Binchuan basin is~42 km.Our results agree with previous results but have higher resolution due to dense interstation spacing.展开更多
The teleseismic receiver functions of 48 stations belonging to the CCDSN are used to invert the crustal structure beneath each station with the neighborhood algorithm. Thin layers with low velocity have been found ben...The teleseismic receiver functions of 48 stations belonging to the CCDSN are used to invert the crustal structure beneath each station with the neighborhood algorithm. Thin layers with low velocity have been found beneath eight stations with ＂abnormal＂ observed receiver functions. Unreasonable results of few stations have been adjusted lightly with the trial-and-error method. The final result indicates that the crust in the western China is relatively thicker than the eastern China. The crust thickness beneath the Tibetan plateau is very large, which reaches 84 km at the station LSA. Double-crust structure exists below the stations LSA and CAD in Tibet, which might imply the collision between the Indian and Eurasian plates. A pronounced low velocity zone in the lower crust beneath the station TNC of Yunnan province might relate to the high temperature or emergence of partially molten material caused by Quaternary volcano, magma and geothermal activities in this area. The Moho is a transitional zone made up of thin layers instead of simple sharp discontinuity beneath several stations. The Conrad discontinuity is clearly identified beneath 20 stations mainly in the southeastern China, whereas it is blurry beneath 14 stations and uncertain beneath remaining stations.展开更多
Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations in...Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations installed in Cameroon between 2005 and 2007. This method allowed us to investigate the lithospheric mantle in that region. The results obtained from the velocity model have been compared to some existing results in this region. These results show the existence of a thick crust having an average thickness of about 35.2 km and a corresponding S wave velocity of 3.7 km/s. For an average S wave velocity of 4.4 km/s the lithospheric mantle appears to be thin in nature and has a thickness that varies from 39 km and 49.6 km. Beyond the lower lithospheric mantle, there exists a low velocity zone, whose thickness varies between 20 km and 43.9 km. The variation of the low velocity zone leads to variation of the lower boundary of the lithospheric mantle boundary at the depths ranging from 73.8 km and 85 km.展开更多
The crustal thicknesses and the Poisson’s ratios under the seismic stations can be calculated by receiver function method with H-κ stacking effectively. But the stacking results are affected to some extent by the av...The crustal thicknesses and the Poisson’s ratios under the seismic stations can be calculated by receiver function method with H-κ stacking effectively. But the stacking results are affected to some extent by the average crustal P-wave velocity. To eliminate this effect and get more accurate crustal structure along the Zhenkang-Luxi deep seismic sounding profile which lies in Yunnan Province, we calculate the receiver functions from the teleseismic events recorded by 11 temporary stations as well as 5 permanent ones along the profile and carry out the stacking with Vp obtained from the profile in this study. Our study shows that the crustal thicknesses along the Zhenkang-Luxi profile range from 34.8 km to 41.8 km with an average of 39 km. The crust is thicker in the middle part of the profile and thinner in both sides in general. Dramatic changes of crustal thickness about 3 km are detected across both the Lancangjiang fault and the Xiaojiang fault, which implies that these faults cut through the Moho. The lowest Poisson’s ratio under the stations is 0.22 and the highest is 0.27 with the mean of 0.25, which is lower than the global average value 0.27 in the continental crust. It suggests that most of the crust along the profile lacks mafic component, but contains more felsic substance. The low Poisson’s ratio also indicates that there is no satisfying condition for partial melting. We deduce that the material flow in the middle-lower crust in the southeastern margin of the Tibetan plateau may occur only in the north region of 24°N.展开更多
We conducted comprehensive receiver function analyses for a large amount of high-quality broadband teleseismic waveforms data recorded at 19 China National Digital Seismic Network （CNDSN） stations deployed in Northe...We conducted comprehensive receiver function analyses for a large amount of high-quality broadband teleseismic waveforms data recorded at 19 China National Digital Seismic Network （CNDSN） stations deployed in Northeast China. An advanced H-κ domain search method was adopted to accurately estimate the crustal thickness and vp/vs ratio. The crust has an average thickness of about 34.4 km. The thinnest crust occurs in the central region of Northeast China, while the thickest crust is beneath the Yanshan belt. The vp/vs ratio is relatively uniform with an average of about 1.733. The highest vp/vs ratio is found beneath the Changbaishan, likely associated with its volcanic activities. We found significant lateral heterogeneity beneath three stations CN2, MDJ, and MIH located along the Suolon suture from the back-zimuthal dependence of Moho depth. The velocity modeling from receiver functions indicated complicated Earth structure beneath these stations with large crust-mantle transition zone, noticeable velocity jump in upper mantle, and low velocity zone in middle crust. Dipping velocity interface in the crust with strike approximately parallel to the Suolon suture and down-dip to the south or southeast might explain the observed lateral heterogeneity.展开更多
A peeling linear inversion method is presented to study the upper mantle （from Moho to 800 km depth） velocity structures with receiver functions. The influences of the crustal and upper mantle velocity ratio error o...A peeling linear inversion method is presented to study the upper mantle （from Moho to 800 km depth） velocity structures with receiver functions. The influences of the crustal and upper mantle velocity ratio error on the inversion results are analyzed, and three valid measures are taken for its reduction. This method is tested with the IASP91 and the PREM models, and the upper mantle structures beneath the stations GTA, LZH, and AXX in northwestern China are then inverted. The results indicate that this inversion method is feasible to quantify upper mantle discontinuities, besides the discontinuities between 3hM （hM denotes the depth of Moho） and 5hM due to the interference of multiples from Moho. Smoothing is used to overcome possible false discontinuities from the multiples and ensure the stability of the inversion results, but the detailed information on the depth range between 3hM and 5hM is sacrificed.展开更多
Using the seismic records of 83 temporary and 17 permanent broadband seismic stations deployed in Tangshan earthquake region and its adjacent areas(39°N–41.5°N,115.5°E–119.5°E),we conducted a non...Using the seismic records of 83 temporary and 17 permanent broadband seismic stations deployed in Tangshan earthquake region and its adjacent areas(39°N–41.5°N,115.5°E–119.5°E),we conducted a nonlinear joint inversion of receiver functions and surface wave dispersion.We obtained some detailed information about the Tangshan earthquake region and its adjacent areas,including sedimentary thickness,Moho depth,and crustal and upper mantle S-wave velocity.Meanwhile,we also obtained the vP/vS structure along two sections across the Tangshan region.The results show that:(1)the Moho depth ranges from 30 km to 38 km,and it becomes shallower from Yanshan uplift area to North China basin;(2)the thickness of sedimentary layer ranges from 0 km to 3 km,and it thickens from Yanshan uplift region to North China basin;(3)the S-wave velocity structure shows that the velocity distribution of the upper crust has obvious correlation with the surface geological structure,while the velocity characteristics of the middle and lower crust are opposite to that of the upper crust.Compared with the upper crust,the heterogeneity of the middle and lower crust is more obvious;(4)the discontinuity of Moho on the two sides of Tangshan fault suggests that Tangshan fault cut the whole crust,and the low vS and high vP/vS beneath the Tangshan earthquake region may reflect the invasion of mantle thermal material through Tangshan fault.展开更多
The P receiver function includes P-to-SV converted phases and multiple reverberations of the discontinuities in the crust and mantle.The time of these phases is related to the crustal thickness and vp/vs ratio,and the...The P receiver function includes P-to-SV converted phases and multiple reverberations of the discontinuities in the crust and mantle.The time of these phases is related to the crustal thickness and vp/vs ratio,and the amplitude of these phases is mainly controlled by the velocity and density contrast of interfaces.By using H-κstacking method,this work estimated the crustal thickness and vP/vS ratio beneath the stations in the Guangdong province of South China.The velocity and density contrast(δβ-δρ)scanning stacking algorithm of the receiver function is applied to constrain the velocity and density contrast of the Moho in Guangdong province.This work analyzed the results of the crustal thickness,vp/vS ratio,and the velocity and density contrasts of Moho.The results indicate that the velocity contrast is higher beneath Yangjiang area in western Guangdong province and Nanao area in eastern Guangdong,which has a strong correlation with the distribution of geothermal springs in local areas and the characteristics of high heat flow.The velocity contrast of Moho has also a good correlation with the vP/vS ratio and the crustal thickness,which indicates that there is a strong material composition contrasts of the Moho in the study area.Velocity and density contrasts of Moho in some local area(such as western Guangdong)are somewhat consistent with the seismic activities.展开更多
s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, i...s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, it is one of the seismically active areas. In the paper, the teleseismic records were selected from 16 national, local and mo-bile stations, including 4 very-wide-band mobile stations of PASSCAL. And nearly 2 000 receiver functions were extracted. Two measuring lines are 650 km and 450 km, respectively and across some major tectonic units in Western Yunnan. It is indicated that Nujiang might be a seam characterized by underthrusting. The western and eastern boundaries of Sichuan-Yunnan rhombus block, i.e., Honghe and Xiaojiang faults, might be an erection seam or collision belt. Panxi tectonic zone still has the characteristics of continental rift valley, that is, the surface is hollow and the upper mantle is upwarping. The tectonic situation in Western Yunnan is of certain regulation with the interlacing distribution of orogenic zone and seam. The crustal thickness decreases gradually from the north to the south and the S wave velocity is globally lower here.展开更多
Northeast China is a unique place to study intra-plate volcanism. We analyzed P-wave receiver function data recorded by 111 permanent broadband seismic stations in Northeast China. The results show that the crustal th...Northeast China is a unique place to study intra-plate volcanism. We analyzed P-wave receiver function data recorded by 111 permanent broadband seismic stations in Northeast China. The results show that the crustal thickness varies from 27.9 km beneath the eastern flank of the Songliao Basin to 40.7 km beneath the Great Xing＇an Range region. The large depth variations of the Moho can be largely but not completely explained by surface topography. The residual Moho depth calculated based on the Airy＇s isostasy model indicates that the Moho is dynamically uplifted by 〈3 km beneath the eastern flank of the Songliao Basin and the Changbaishan region. We suggest that a mantle upwelling, which has been proposed by several recent seismic studies, might have caused the uplift.展开更多
Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave ...Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave dispersion, Rayleigh wave ZH ratio （i.e., ellipticity）, and receiver function data to better resolve 1D crustal shear wave velocity （Vs） structure. Surface wave dispersion and Rayleigh wave ZH ratio data are more sensitive to absolute variations of shear wave speed at depths, but their sensi- tivity kernels to shear wave speeds are different and complimentary. However, receiver function data are more sensitive to sharp velocity contrast （e.g., due to the existence of crustal interfaces） and Vp/Vs ratios. The stepwise inversion method takes advantages of the complementary sensitivities of each dataset to better constrain the Vs model in the crust. We firstly invert surface wave dispersion and ZH ratio data to obtain a 1D smooth absolute vs model and then incorporate receiver function data in the joint inver- sion to obtain a finer Vs model with better constraints on interface structures. Through synthetic tests, Monte Carlo error analyses, and application to real data, we demonstrate that the proposed joint inversion method can resolve robust crustal Vs structures and with little initial model dependency.展开更多
The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath ...The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath WQD station near to the Tianchi caldera the low velocity layer at 8 km depth is 20 km thick with the lowest S-wave velocity about 2.2 km/s At EDO station located 50 km north of Tianchi caldera, no obvious crustal low velocity layer is detected. In the volcanic region, the thickness of crustal low velocity layer is greater and the lowest velocity is more obvious with the distance shorter to the caldera. It indicates the existence of the high temperature material or magma reservoir in crust near the Tianchi caldera. The receiver functions and inversion result from different back azimuths at CBS permanent seismic station show that the thickness of near surface low velocity layer and Moho depth change with directions. The near surface low velocity layer is obviously thicker in south direction. The Moho depth shows slight uplifting in the direction of the caldera located. We con- sider that the special near surface velocity structure is the main cause of relatively lower prominent frequency of volcanic earthquake waveforms recorded by CBS station. The slight uplifting of Moho beneath Tianchi caldera indicates there is a material exchanging channel between upper mantle and magma reservoir in crust.展开更多
P-wave and S-wave receiver function analyses have been performed along a profile consisted of 27 broadband seismic stations to image the crustal and upper mantle discontinuities across Northeast China. The results sho...P-wave and S-wave receiver function analyses have been performed along a profile consisted of 27 broadband seismic stations to image the crustal and upper mantle discontinuities across Northeast China. The results show that the average Moho depth varies from about 37 km beneath the Daxing＇anling orogenic belt in the west to about 33 km beneath the Songliao Basin, and to about 35 km beneath the Changbai mountain region in the east. Our results reveal that the Moho is generally flat beneath the Daxing＇anling region and a remarkable Moho offset （about 4 km） exists beneath the basin-mountain boundary, the Daxing＇anling-Taihang Gravity Line. Beneath the Tanlu faults zone, which seperates the Songliao Basin and Changbai region, the Moho is uplift and the crustal thick- ness changes rapidly. We interpret this feature as that the Tanlu faults might deeply penetrate into the upper mantle, and facilitate the mantle upwelling along the faults during the Cenozoic era. The average depth of the lithosphereasthenosphere boundary （LAB） is - 80 km along the profile which is thinner than an average thickness of a continental lithosphere. The LAB shows an arc-like shape in the basin, with the shallowest part approximately beneath the center of the basin. The uplift LAB beneath the basin might be related to the extensive lithospheric stretching in the Mesozoic. In the mantle transition zone, a structurally complicated 660 km discontinuity with a maximum 35 km depression beneath the Changbai region is observed. The 35 km depression is roughly coincident with the location of the stagnant western pacific slab on top of the 660 km discontinuity revealed by the recent P wave tomography.展开更多
基金supported by the Spark Program of Earthquake Technology of CEA,China(XH20032)open Research Project from the State Key Laboratory of Nuclear Resources and Environment,East China University of Technology(2022NRE17)+1 种基金open Research Project from the State Key Laboratory of Geological Processes,Mineral Resources,China University of Geosciences(GPMR202114)the Graduate Student Innovation Fund of East China University of Technology(YC2022-s628)。
文摘We collected high-quality teleseismic events recorded by 12 broadband seismographs deployed in the Anyuan Coal Mine and its adjacent areas in Pingxiang City,Jiangxi Province for nearly two years.The H-κ-c stacking method was employed to obtain the crustal thickness and Poisson's ratio distribution,then the characteristics of crustal structure below the stations were obtained by using the time-domain linear inversion method.The crustal thickness in the Anyuan Coal Mine and its adjacent areas ranges from approximately 32~35 km,with an average thickness of 33 km,which is consistent with the crustal thickness results in South China from previous studies using the receiver function method.The average Poisson's ratio of the crustal bulk composition in the study area varies between 0.22 and 0.25,which is lower than the global value with a 0.27 average,indicating a predominantly intermediate-acidic or felsic crustal composition.There is a weak negative correlation between Poisson's ratio and crustal thickness estimates in the Anyuan Coal Mine and its adjacent areas,suggesting that the absence of mafic-ultramafic materials in the lower crust is associated with the process of crustal delamination.The velocity inversion results indicate that the crustal structure including three velocity discontinuity interfaces,with the first at a depth of approximately 1.5 km,the second at about 10~15 km,and the third being the Moho.The study also indicates that the results obtained by the H-κ-c stacking method are significantly better than those obtained by the H-κmethod,effectively reducing the standard deviation and dispersion of crustal thickness and vP/vSratio.
基金supported by the Natural Science Basic Research Program of Shaanxi(No.2023-JC-QN-0306)the Special Fund of the Institute of Geophysics,China Earthquake Administration(No.DQJB21B32)the National Natural Science Foundation of China(No.42174069).
文摘Lithospheric structure beneath the northeastern Qinghai-Xizang Plateau is of vital significance for studying the geodynamic processes of crustal thickening and expansion of the Qinghai-Xizang Plateau. We conducted a joint inversion of receiver functions and surface wave dispersions with P-wave velocity constraints using data from the Chin Array Ⅱ temporary stations deployed across the Qinghai-Xizang Plateau. Prior to joint inversion, we applied the H-κ-c method(Li JT et al., 2019) to the receiver function data in order to correct for the back-azimuthal variations in the arrival times of Ps phases and crustal multiples caused by crustal anisotropy and dipping interfaces. High-resolution images of vS, crustal thickness, and vP/vSstructures in the Qinghai-Xizang Plateau were simultaneously derived from the joint inversion. The seismic images reveal that crustal thickness decreases outward from the Qinghai-Xizang Plateau. The stable interiors of the Ordos and Alxa blocks exhibited higher velocities and lower crustal vP/vSratios. While, lower velocities and higher vP/vSratios were observed beneath the Qilian Orogen and Songpan-Ganzi terrane(SPGZ), which are geologically active and mechanically weak, especially in the mid-lower crust.Delamination or thermal erosion of the lithosphere triggered by hot asthenospheric flow contributes to the observed uppermost mantle low-velocity zones(LVZs) in the SPGZ. The crustal thickness, vS, and vP/vSratios suggest that whole lithospheric shortening is a plausible mechanism for crustal thickening in the Qinghai-Xizang Plateau, supporting the idea of coupled lithospheric-scale deformation in this region.
基金supported by the National Science Foundation of China (Nos. U1839210, 41874097, 41474072, and 41874108)
文摘The Tian Shan is a vast range that spans several countries in Asia.Understanding its evolutionary history may provide valuable insights into intracontinental orogenic dynamics.In this study,we explored the crustal characteristics of the Tian Shan and their relationships to the tectonic evolution of the region.A new H-stacking method that combines the P receiver function and gravity anomalies was used to estimate the thickness and ratio of P-to S-wave velocities(Vp/Vs)for 91 broadband seismic stations in the central and western Tian Shan.Our results revealed significant lateral variations in crustal thickness and Vp/Vs.A—45-km-thick crust and an intermediate-high Vp/Vs(-1.74-1.84)were found in the Kazakh Shield and Tarim Basin,which we interpreted to indicate a mafic crystalline basement and lower crust.The central Tian Shan varied greatly in crustal thickness(40-64 km)and Vp/Vs ratio(1.65-2.00).which may be due to crustal shortening,mafic underplating,and crustal melting.In contrast,we observed a relatively thin crust(42-50 km)with an intermediate Vp/Vs ratio(-1.78)in the western Tian Shan.The differences in the crustal structures between the western and central Tian Shan imply that the Talas-Fergana Fault may be trans-lithospheric.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 40334041, 40774037)Joint Foundation of Earthquake Science (Grant No. 1040062)
文摘Teleseismic P-wave receiver functions at 20 broadband seismic stations in the Longmenshan fault zone (LMFZ) and its vicinity were extracted, and the crustal thickness and the P- and S-wave velocity ratio were calculated by use of the H-k stacking algorithm. With the results as constraints, the S-wave ve-locity structures beneath each station were determined by the inversion of receiver functions. The crustal structure of the Rear-range zone is similar to that of the Songpan-Garze Block, whereas the velocity structure of the Fore-range zone resembles that of Sichuan Basin, implying that the Central Principal Fault of LMFZ is the boundary between the eastern Tibetan Plateau and the Yangtze Block. Lower velocity zone exists in lower crust of the Songpan-Garze Block and the central-southern seg-ment of the Rear-range zone, which facilitates the detachment of the material in upper and middle crust. Joint analysis of the receiver functions and the Bouguer gravity anomalies supports the thesis on the detachment-thrust mode of the LMFZ. A double-detachment pattern is suggested to the tectonic setting in the Songpan-Garze Block. The upper detachment occurs at the depth of 10-15 km, and represents a high-temperature ductile shear zone. There is a lower detachment at the depth of about 30 km, below which the lower crust flow exists in the eastern Tibetan Plateau. Interpretation of the Bouguer gravity anomalies indicates that the Sichuan Basin is of higher density in upper and middle crust in compari-son with that of the Songpan-Garze Block. The LMFZ with higher density is the result from the thrusting of the Songpan-Garze Block over the Sichuan Basin. In the lower crust, higher P velocity and higher density in the Sichuan Basin are related to more rigid material, while lower S velocity and lower density in the Songpan-Garze Block are related to the softened and weakened material. The higher density block beneath the Sichuan Basin obstructs the eastward flow of lower crustal material from the Tibetan Plateau, which is driven by the compression of northward movement of Indian Plate. The eastward movement of upper and middle crustal material is also obstructed by the rigid Yangtze Block, resulting in the stress concentrated and accumulated along the LMFZ. When the stress releases sharply, the Wenchuan Ms8.0 earthquake occurs.
文摘We analyzed a total of 37 427 receiver-function data recorded by national and regional broadband seismic networks of the China Earthquake Administration to study the mantle transition zone beneath eastern and central China. Significant topography on both the 410-km and 660-km discontinuities was clearly imaged in the 3D volume of CCP （common-conversion-point） stacked images that cover an area of 102.5°F-122.5°E and 22.0°N-42.0°N. 3D crustal and mantle velocity models were used in computing the Ps time moveouts to better image the absolute depths of the two discontinuities. We found that the 660-km discontinuity is depressed up to 25 km along the east coast of China, indicating the presence of the subducted Pacific slab in the region. More interestingly, a double 660-km was observed beneath the Huanghai Sea, which was not seen from the 410-km discontinuity. We found a strong and localized anomaly beneath the Quaternary Datong volcano located at the northeastern edge of the Ordos Plateau in North China. The 410-km is depressed by as much as 15 km beneath the volcano. If the amount of the depression is caused by unmodeled low velocity anomaly in the upper mantle, it requires either a strong （4%-8%） localized low velocity anomaly near the lithosphere-asthenosphere boundary or -1.5% low velocity column across the entire upper mantle above the 410-km. The latter could suggest a deep origin of the Datong volcano, although it was usually attributed to edge-driven convection by most of the literatures.
基金supported by the basic research and development fund from Institute of Earthquake Science,China Earthquake Administration(grant No.2011IESLZ05)the National Natural Science Foundation of China(grant No.40904014)
文摘The teleseismic receiver functions of digital seismic network of Ningxia and its adjacent area are calculated with two different Gauss filter factors. The accuracy and stability of the receiver functions are discussed. The h-k stacking method is applied to estimate the crustal thickness and velocity ratio beneath seismic stations. The results indicate that there are sharp changes of crustal thickness and velocity ratio in the studied region. This region is located in the northeastern margin of Tibet, and also a junction of several first-grade blocks. The large contrast of crustal structure in this region is considered to be resulted from the interaction of these blocks. Our results are helpful to construct the completed model of the formation and evolution of the Tibet. Some local structures are also discussed combining with the geological faults.
基金supported by the National Key R&D Program of China(No.2018YFC1503400)China Earthquake Science Experiment Project,CEA(Nos.2018CSES0101,2018CSES0102 and 2019CSES0107)+2 种基金HKSAR Research Grant Council GRF(No.14305617)CUHK Direct Grant from Faculty of Science,National Natural Scientific Foundation of China(Nos.41974069 and 41790463)Chen Yong Academician Workstation of Yunnan Province in China(No.2014IC007)。
文摘The Binchuan region is located in a seismically active area in northwestern Yunnan,China.The detailed crustal structure is important to understand the tectonic evolution and to assess the seismic hazard in the study area.With a 2-D dense array deployed in this region,we use teleseismic receiver function traditional imaging methods,including the H-κand common-conversion-point stacking methods,to derive high-resolution crustal thickness and vP/vS ratio maps.Our results indicate that the crustal thickness increases from~40 km to~46 km in the south-north direction,and the average crustal thickness beneath the Binchuan basin is~42 km.Our results agree with previous results but have higher resolution due to dense interstation spacing.
基金supported by the basic research and development fund from Institute of Earthquake Science,China Earthquake Administration(grant No.2011IESLZ05)the National Natural Science Foundation of China(grant Nos.40374009and 40904014)
文摘The teleseismic receiver functions of 48 stations belonging to the CCDSN are used to invert the crustal structure beneath each station with the neighborhood algorithm. Thin layers with low velocity have been found beneath eight stations with ＂abnormal＂ observed receiver functions. Unreasonable results of few stations have been adjusted lightly with the trial-and-error method. The final result indicates that the crust in the western China is relatively thicker than the eastern China. The crust thickness beneath the Tibetan plateau is very large, which reaches 84 km at the station LSA. Double-crust structure exists below the stations LSA and CAD in Tibet, which might imply the collision between the Indian and Eurasian plates. A pronounced low velocity zone in the lower crust beneath the station TNC of Yunnan province might relate to the high temperature or emergence of partially molten material caused by Quaternary volcano, magma and geothermal activities in this area. The Moho is a transitional zone made up of thin layers instead of simple sharp discontinuity beneath several stations. The Conrad discontinuity is clearly identified beneath 20 stations mainly in the southeastern China, whereas it is blurry beneath 14 stations and uncertain beneath remaining stations.
文摘Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations installed in Cameroon between 2005 and 2007. This method allowed us to investigate the lithospheric mantle in that region. The results obtained from the velocity model have been compared to some existing results in this region. These results show the existence of a thick crust having an average thickness of about 35.2 km and a corresponding S wave velocity of 3.7 km/s. For an average S wave velocity of 4.4 km/s the lithospheric mantle appears to be thin in nature and has a thickness that varies from 39 km and 49.6 km. Beyond the lower lithospheric mantle, there exists a low velocity zone, whose thickness varies between 20 km and 43.9 km. The variation of the low velocity zone leads to variation of the lower boundary of the lithospheric mantle boundary at the depths ranging from 73.8 km and 85 km.
基金supported by the Seismic Youth Funding of Geophysical Exploration Center,China Earthquake Administration (YFGEC2016003)the National Natural Science Foundation of China (41774070 and 41404049)
文摘The crustal thicknesses and the Poisson’s ratios under the seismic stations can be calculated by receiver function method with H-κ stacking effectively. But the stacking results are affected to some extent by the average crustal P-wave velocity. To eliminate this effect and get more accurate crustal structure along the Zhenkang-Luxi deep seismic sounding profile which lies in Yunnan Province, we calculate the receiver functions from the teleseismic events recorded by 11 temporary stations as well as 5 permanent ones along the profile and carry out the stacking with Vp obtained from the profile in this study. Our study shows that the crustal thicknesses along the Zhenkang-Luxi profile range from 34.8 km to 41.8 km with an average of 39 km. The crust is thicker in the middle part of the profile and thinner in both sides in general. Dramatic changes of crustal thickness about 3 km are detected across both the Lancangjiang fault and the Xiaojiang fault, which implies that these faults cut through the Moho. The lowest Poisson’s ratio under the stations is 0.22 and the highest is 0.27 with the mean of 0.25, which is lower than the global average value 0.27 in the continental crust. It suggests that most of the crust along the profile lacks mafic component, but contains more felsic substance. The low Poisson’s ratio also indicates that there is no satisfying condition for partial melting. We deduce that the material flow in the middle-lower crust in the southeastern margin of the Tibetan plateau may occur only in the north region of 24°N.
文摘We conducted comprehensive receiver function analyses for a large amount of high-quality broadband teleseismic waveforms data recorded at 19 China National Digital Seismic Network （CNDSN） stations deployed in Northeast China. An advanced H-κ domain search method was adopted to accurately estimate the crustal thickness and vp/vs ratio. The crust has an average thickness of about 34.4 km. The thinnest crust occurs in the central region of Northeast China, while the thickest crust is beneath the Yanshan belt. The vp/vs ratio is relatively uniform with an average of about 1.733. The highest vp/vs ratio is found beneath the Changbaishan, likely associated with its volcanic activities. We found significant lateral heterogeneity beneath three stations CN2, MDJ, and MIH located along the Suolon suture from the back-zimuthal dependence of Moho depth. The velocity modeling from receiver functions indicated complicated Earth structure beneath these stations with large crust-mantle transition zone, noticeable velocity jump in upper mantle, and low velocity zone in middle crust. Dipping velocity interface in the crust with strike approximately parallel to the Suolon suture and down-dip to the south or southeast might explain the observed lateral heterogeneity.
基金supported by the basic research and development fund from Institute of Earthquake Science,China Earthquake Administration(grant No.2011IESLZ05)National Natural Science Foundation of China(grant Nos.40574024 and 40374009)
文摘A peeling linear inversion method is presented to study the upper mantle （from Moho to 800 km depth） velocity structures with receiver functions. The influences of the crustal and upper mantle velocity ratio error on the inversion results are analyzed, and three valid measures are taken for its reduction. This method is tested with the IASP91 and the PREM models, and the upper mantle structures beneath the stations GTA, LZH, and AXX in northwestern China are then inverted. The results indicate that this inversion method is feasible to quantify upper mantle discontinuities, besides the discontinuities between 3hM （hM denotes the depth of Moho） and 5hM due to the interference of multiples from Moho. Smoothing is used to overcome possible false discontinuities from the multiples and ensure the stability of the inversion results, but the detailed information on the depth range between 3hM and 5hM is sacrificed.
基金This research is supported by Spark Program of Earthquake Science(No.XH18065Y)National Natural Science Foundation of China(Nos.41774066 and 41604049)。
文摘Using the seismic records of 83 temporary and 17 permanent broadband seismic stations deployed in Tangshan earthquake region and its adjacent areas(39°N–41.5°N,115.5°E–119.5°E),we conducted a nonlinear joint inversion of receiver functions and surface wave dispersion.We obtained some detailed information about the Tangshan earthquake region and its adjacent areas,including sedimentary thickness,Moho depth,and crustal and upper mantle S-wave velocity.Meanwhile,we also obtained the vP/vS structure along two sections across the Tangshan region.The results show that:(1)the Moho depth ranges from 30 km to 38 km,and it becomes shallower from Yanshan uplift area to North China basin;(2)the thickness of sedimentary layer ranges from 0 km to 3 km,and it thickens from Yanshan uplift region to North China basin;(3)the S-wave velocity structure shows that the velocity distribution of the upper crust has obvious correlation with the surface geological structure,while the velocity characteristics of the middle and lower crust are opposite to that of the upper crust.Compared with the upper crust,the heterogeneity of the middle and lower crust is more obvious;(4)the discontinuity of Moho on the two sides of Tangshan fault suggests that Tangshan fault cut the whole crust,and the low vS and high vP/vS beneath the Tangshan earthquake region may reflect the invasion of mantle thermal material through Tangshan fault.
基金the National Key R&D Program of China(No.2017YFC1500100)National Natural Science Foundation of China(Nos.U1701641,41874052,41730211 and 41774049)+5 种基金Guangdong Province Introduced Innovative R&D Team(Nos.2017ZT07Z066 and 2016ZT06N331)Guangdong Science and Technology Plan Project(No.2017B030314082)Combination Project with Monitoring,Prediction and Scientific Research of Earthquake Technology,CEA(No.3JH-201901051)Seismic Regime Tracking Project of CEA(No.2020010111)Some figures were plotted with Generic Mapping Tools(Wessel and Smith,1995)The authors sincerely acknowledge the anonymous reviewers and journal editors for their help,support,checking and helpful comments to the manuscript.
文摘The P receiver function includes P-to-SV converted phases and multiple reverberations of the discontinuities in the crust and mantle.The time of these phases is related to the crustal thickness and vp/vs ratio,and the amplitude of these phases is mainly controlled by the velocity and density contrast of interfaces.By using H-κstacking method,this work estimated the crustal thickness and vP/vS ratio beneath the stations in the Guangdong province of South China.The velocity and density contrast(δβ-δρ)scanning stacking algorithm of the receiver function is applied to constrain the velocity and density contrast of the Moho in Guangdong province.This work analyzed the results of the crustal thickness,vp/vS ratio,and the velocity and density contrasts of Moho.The results indicate that the velocity contrast is higher beneath Yangjiang area in western Guangdong province and Nanao area in eastern Guangdong,which has a strong correlation with the distribution of geothermal springs in local areas and the characteristics of high heat flow.The velocity contrast of Moho has also a good correlation with the vP/vS ratio and the crustal thickness,which indicates that there is a strong material composition contrasts of the Moho in the study area.Velocity and density contrasts of Moho in some local area(such as western Guangdong)are somewhat consistent with the seismic activities.
基金State Key Basic Research Development and Programming Project of China (G1998040700).
文摘s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, it is one of the seismically active areas. In the paper, the teleseismic records were selected from 16 national, local and mo-bile stations, including 4 very-wide-band mobile stations of PASSCAL. And nearly 2 000 receiver functions were extracted. Two measuring lines are 650 km and 450 km, respectively and across some major tectonic units in Western Yunnan. It is indicated that Nujiang might be a seam characterized by underthrusting. The western and eastern boundaries of Sichuan-Yunnan rhombus block, i.e., Honghe and Xiaojiang faults, might be an erection seam or collision belt. Panxi tectonic zone still has the characteristics of continental rift valley, that is, the surface is hollow and the upper mantle is upwarping. The tectonic situation in Western Yunnan is of certain regulation with the interlacing distribution of orogenic zone and seam. The crustal thickness decreases gradually from the north to the south and the S wave velocity is globally lower here.
文摘Northeast China is a unique place to study intra-plate volcanism. We analyzed P-wave receiver function data recorded by 111 permanent broadband seismic stations in Northeast China. The results show that the crustal thickness varies from 27.9 km beneath the eastern flank of the Songliao Basin to 40.7 km beneath the Great Xing＇an Range region. The large depth variations of the Moho can be largely but not completely explained by surface topography. The residual Moho depth calculated based on the Airy＇s isostasy model indicates that the Moho is dynamically uplifted by 〈3 km beneath the eastern flank of the Songliao Basin and the Changbaishan region. We suggest that a mantle upwelling, which has been proposed by several recent seismic studies, might have caused the uplift.
基金supported by the National Earthquake Science Experiment in Sichuan and Yunnan Provinces of China(#2016 CESE 0201)National Natural Science Foundation of China(#41574034)China National Special Fund for Earthquake Scientific Research in Public Interest(#201508008)
文摘Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave dispersion, Rayleigh wave ZH ratio （i.e., ellipticity）, and receiver function data to better resolve 1D crustal shear wave velocity （Vs） structure. Surface wave dispersion and Rayleigh wave ZH ratio data are more sensitive to absolute variations of shear wave speed at depths, but their sensi- tivity kernels to shear wave speeds are different and complimentary. However, receiver function data are more sensitive to sharp velocity contrast （e.g., due to the existence of crustal interfaces） and Vp/Vs ratios. The stepwise inversion method takes advantages of the complementary sensitivities of each dataset to better constrain the Vs model in the crust. We firstly invert surface wave dispersion and ZH ratio data to obtain a 1D smooth absolute vs model and then incorporate receiver function data in the joint inver- sion to obtain a finer Vs model with better constraints on interface structures. Through synthetic tests, Monte Carlo error analyses, and application to real data, we demonstrate that the proposed joint inversion method can resolve robust crustal Vs structures and with little initial model dependency.
基金supported by National Key Project of Scientific and Technical Supporting Programs Funded by Ministry of Science & Technology of China (2006BAC01B04)Joint Seismological Science Foundation of China (106023)Contribution No. is 09FE3006 of Institute of Geophysics,China Earthquake Administration
文摘The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath WQD station near to the Tianchi caldera the low velocity layer at 8 km depth is 20 km thick with the lowest S-wave velocity about 2.2 km/s At EDO station located 50 km north of Tianchi caldera, no obvious crustal low velocity layer is detected. In the volcanic region, the thickness of crustal low velocity layer is greater and the lowest velocity is more obvious with the distance shorter to the caldera. It indicates the existence of the high temperature material or magma reservoir in crust near the Tianchi caldera. The receiver functions and inversion result from different back azimuths at CBS permanent seismic station show that the thickness of near surface low velocity layer and Moho depth change with directions. The near surface low velocity layer is obviously thicker in south direction. The Moho depth shows slight uplifting in the direction of the caldera located. We con- sider that the special near surface velocity structure is the main cause of relatively lower prominent frequency of volcanic earthquake waveforms recorded by CBS station. The slight uplifting of Moho beneath Tianchi caldera indicates there is a material exchanging channel between upper mantle and magma reservoir in crust.
文摘P-wave and S-wave receiver function analyses have been performed along a profile consisted of 27 broadband seismic stations to image the crustal and upper mantle discontinuities across Northeast China. The results show that the average Moho depth varies from about 37 km beneath the Daxing＇anling orogenic belt in the west to about 33 km beneath the Songliao Basin, and to about 35 km beneath the Changbai mountain region in the east. Our results reveal that the Moho is generally flat beneath the Daxing＇anling region and a remarkable Moho offset （about 4 km） exists beneath the basin-mountain boundary, the Daxing＇anling-Taihang Gravity Line. Beneath the Tanlu faults zone, which seperates the Songliao Basin and Changbai region, the Moho is uplift and the crustal thick- ness changes rapidly. We interpret this feature as that the Tanlu faults might deeply penetrate into the upper mantle, and facilitate the mantle upwelling along the faults during the Cenozoic era. The average depth of the lithosphereasthenosphere boundary （LAB） is - 80 km along the profile which is thinner than an average thickness of a continental lithosphere. The LAB shows an arc-like shape in the basin, with the shallowest part approximately beneath the center of the basin. The uplift LAB beneath the basin might be related to the extensive lithospheric stretching in the Mesozoic. In the mantle transition zone, a structurally complicated 660 km discontinuity with a maximum 35 km depression beneath the Changbai region is observed. The 35 km depression is roughly coincident with the location of the stagnant western pacific slab on top of the 660 km discontinuity revealed by the recent P wave tomography.
