In this study,a bald eagle optimizer(BEO)is used to get optimal parameters of the fractional-order proportional-integral-derivative(FOPID)controller for load frequency control(LFC).SinceBEOtakes only a very short time...In this study,a bald eagle optimizer(BEO)is used to get optimal parameters of the fractional-order proportional-integral-derivative(FOPID)controller for load frequency control(LFC).SinceBEOtakes only a very short time in finding the optimal solution,it is selected for designing the FOPID controller that improves the system stability and maintains the frequency within a satisfactory range at different loads.Simulations and demonstrations are carried out using MATLAB-R2020b.The performance of the BEOFOPID controller is evaluated using a two-zone interlinked power system at different loads and under uncertainty of wind and solar energies.The robustness of the BEO-FOPID controller is examined by testing its performance under varying system time constants.The results obtained by the BEOFOPID controller are compared with those obtained by BEO-PID and PID controllers based on recent metaheuristics optimization algorithms,namely the sine-cosine approach,Jaya approach,grey wolf optimizer,genetic algorithm,bacteria foraging optimizer,and equilibrium optimization algorithm.The results confirm that the BEO-FOPID controller obtains the finest result,with the lowest frequency deviation.The results also confirm that the BEOFOPID controller is stable and robust at different loads,under varying system time constants,and under uncertainty of wind and solar energies.展开更多
A plant-friendly proportional-integral-derivative （PID） controller optimization framework is proposed to make tradeoffs among set-point response,controller output variations and robustness.The objective function is ...A plant-friendly proportional-integral-derivative （PID） controller optimization framework is proposed to make tradeoffs among set-point response,controller output variations and robustness.The objective function is chosen as the weighted sum of the integral of squared time-weighted error and the integral of squared timeweighted derivative of the control variable with respect to set-point response,while the robustness of the system is guaranteed by constraints on gain and phase margins.Due to the complex structure of the constraints,the problem is solved by genetic algorithms.Simulation analysis show the proposed method could efficiently reduce the controller output variations while maintaining a short settling time.Based on the simulation results,iterative tuning rules for the weighting factor in the objective function are obtained,which allows efficient simple proportional-integral（PI） tuning formulae to be derived.展开更多
The present paper studies the use of genetic algorithm to optimize the tuning of the Proportional, Integral and Derivative (PID) controller. Two control criteria were considered, the integral of the time multiplied by...The present paper studies the use of genetic algorithm to optimize the tuning of the Proportional, Integral and Derivative (PID) controller. Two control criteria were considered, the integral of the time multiplied by the absolute error (ITAE), and the integral of the time multiplied by the absolute output (ITAY). The time variant plant tested is a first-order plant with time delay. We aim at a real time implementation inside a digital board, so, the previous continuous approach was discretized and tested;the corresponding control algorithm is presented in this paper. The genetic algorithms and the PID controller are executed using the soft processor NIOS II in the Field Programmable Gate Array (FPGA). The computational results show the robustness and versatility of this technology.展开更多
Quadrotor unmanned aerial vehicles(UAVs)are widely used in inspection,agriculture,express delivery,and other fields owing to their low cost and high flexibility.However,the current UAV control system has shortcomings ...Quadrotor unmanned aerial vehicles(UAVs)are widely used in inspection,agriculture,express delivery,and other fields owing to their low cost and high flexibility.However,the current UAV control system has shortcomings such as poor control accuracy and weak anti-interference ability to a certain extent.To address the control problem of a four-rotor UAV,we propose a method to enhance the controller’s accuracy by considering underactuated dynamics,nonlinearities,and external disturbances.A mathematical model is constructed based on the flight principles of the quadrotor UAV.We develop a control algorithm that combines humanoid intelligence with a cascade Proportional-Integral-Derivative(PID)approach.This algorithm incorporates the rate of change of the error into the inputs of the cascade PID controller,uses both the error and its rate of change as characteristic variables of the UAV’s control system,and employs a hyperbolic tangent function to improve the outer-loop control.The result is a double closed-loop intelligent PID(DCLIPID)control algorithm.Through MATLAB numerical simulation tests,it is found that the DCLIPID algorithm reduces the rise time by 0.5 s and the number of oscillations by 2 times compared to the string PID algorithm when a unit step signal is used as input.A UAV flight test was designed for comparison with the serial PID algorithm,and it was found that when the UAV planned the trajectory autonomously,the errors in the X-,Y-,and Z-directions were reduced by 0.22,0.21,and 0.31 m,respectively.Under the interference environment of artificial wind about 3.6 m·s-1,the UAV hovering error in X-,Y-,and Z-directions are 0.24,0.42,and 0.27 m,respectively.The simulation and experimental results show that the control method of humanoid intelligence and cascade PID can improve the real-time,control accuracy and anti-interference ability of the UAV,and the method has a certain reference value for the research in the field of UAV control.展开更多
In the practice of control the industrial processes, proportional-integral-derivative controller remains pivotal due to its simple structure and system performance-oriented tuning process. In this paper are presented ...In the practice of control the industrial processes, proportional-integral-derivative controller remains pivotal due to its simple structure and system performance-oriented tuning process. In this paper are presented two approaches for synthesis the proportional-integral-derivative controller to the models of objects with inertia, that offer the procedure of system performance optimization based on maximum stability degree criterion. The proposed algorithms of system performance optimization were elaborated for model of objects with inertia second and third order and offer simple analytical expressions for tuning the PID controller. Validation and verification are conducted through computer simulations using MATLAB, demonstrating successful performance optimization and showcasing the effectiveness PID controllers’ tuning. The proposed approaches contribute insights to the field of control, offering a pathway for optimizing the performance of second and third-order inertial systems through robust controller synthesis.展开更多
To address the challenge of achieving unified control across diverse nonlinear systems, a comprehensive control theory spanning from PID (Proportional-Integral-Derivative) to ACPID (Auto-Coupling PID) has been propose...To address the challenge of achieving unified control across diverse nonlinear systems, a comprehensive control theory spanning from PID (Proportional-Integral-Derivative) to ACPID (Auto-Coupling PID) has been proposed. The primary concept is to unify all intricate factors, including internal dynamics and external bounded disturbance, into a single total disturbance. This enables the mapping of various nonlinear systems onto a linear disturbance system. Based on the theory of PID control and the characteristic equation of a critically damping system, Zeng’s stabilization rules (ZSR) and an ACPID control force based on a single speed factor have been designed. ACPID control theory is both simple and practical, with significant scientific significance and application value in the field of control engineering.展开更多
In this paper, the problem of stabilizing an unstable second order delay system using classical proportional-integralderivative(PID) controller is considered. An extension of the Hermite-Biehler theorem, which is appl...In this paper, the problem of stabilizing an unstable second order delay system using classical proportional-integralderivative(PID) controller is considered. An extension of the Hermite-Biehler theorem, which is applicable to quasi-polynomials, is used to seek the set of complete stabilizing proportional-integral/proportional-integral-derivative(PI/PID) parameters. The range of admissible proportional gains is determined in closed form. For each proportional gain, the stabilizing set in the space of the integral and derivative gains is shown to be a triangle.展开更多
This paper presents an approach to design proportional-integral-derivative controllers for inductionmachines usingmeasurements.Most controlmethods developed for induc-tion machines are generally based on mathematical ...This paper presents an approach to design proportional-integral-derivative controllers for inductionmachines usingmeasurements.Most controlmethods developed for induc-tion machines are generally based on mathematical models.Due to complex dynamics of induction machines,identified models are often unable to perfectly describe their behaviour.Thus,the system performance will be limited by the quality of the identified model.Hence,developing control methods that do not require the availability of system model is advantageous.Here,we propose an approach that uses the frequency response data to directly design controllers.The main idea here is to find controller parameters so that the closed-loop frequency response fits a desired frequency response.Its main advantage is that errors associated with the modelling process are avoided.Moreover,the control design process does not depend on the order and complexity of the plant.A practical application to induction machines illustrates the efficacy of the proposed approach.展开更多
In this paper, simulated and experimental results on the conical tank level control are presented. PI/PID controllers of integer order （IO） as well as of fractional order （FO） are studied and compared. The tuning ...In this paper, simulated and experimental results on the conical tank level control are presented. PI/PID controllers of integer order （IO） as well as of fractional order （FO） are studied and compared. The tuning parameters are obtained first by using root locus （RL） and Ziegler and Nichols methods, for comparison purposes. Next, particle swarm optimization （PSO） is employed to determine the optimal controllers＇ parameters using as fitness function the integral of the absolute value of tracking error （IAE）. From the experimental results it is concluded that PI/FOPI are the controllers presenting the lowest IAE indexes, whereas PID/FOPID controllers present the lowest energy consumption by the control signal.展开更多
The execution of the gaits generated with the help of a gait planner is a crucial task in biped locomotion. This task is to be achieved with the help of a suitable torque based controller to ensure smooth walk of the ...The execution of the gaits generated with the help of a gait planner is a crucial task in biped locomotion. This task is to be achieved with the help of a suitable torque based controller to ensure smooth walk of the biped robot. It is important to note that the success of the developed proportion integration differentiation （PID） controller depends on the selected gains of the controller. In the present study, an attempt is made to tune the gains of the PID controller for the biped robot ascending and descending the stair case and sloping surface with the help of two non-traditional optimization algorithms, namely modified chaotic invasive weed optimization （MCIWO） and particle swarm optimization （PSO） algorithms. Once the optimal PID controllers are developed, a simulation study has been conducted in computer for obtaining the optimal tuning parameters of the controller of the biped robot. Finally, the optimal gait angles obtained by using the best controller are fed to the real biped robot and found that the biped robot has successfully negotiated the said terrains.展开更多
With the rapid development of network technology and control technology,a networked multi-agent control system is a key direction of modern industrial control systems,such as industrial Internet systems.This paper stu...With the rapid development of network technology and control technology,a networked multi-agent control system is a key direction of modern industrial control systems,such as industrial Internet systems.This paper studies the tracking control problem of networked multi-agent systems with communication constraints,where each agent has no information on the dynamics of other agents except their outputs.A networked predictive proportional integral derivative(PPID)tracking scheme is proposed to achieve the desired tracking performance,compensate actively for communication delays,and simplify implementation in a distributed manner.This scheme combines the past,present and predictive information of neighbour agents to form a tracking error signal for each agent,and applies the proportional,integral,and derivative of the agent tracking error signal to control each individual agent.The criteria of the stability and output tracking consensus of multi-agent systems with the networked PPID tracking scheme are derived through detailed analysis on the closed-loop systems.The effectiveness of the networked PPID tracking scheme is illustrated via an example.展开更多
In a controlled indoor environment,line tracking has become the most practical and reliable navigation strategy for autonomous mobile robots.A line tracking robot is a self-mobile machine that can recognize and track ...In a controlled indoor environment,line tracking has become the most practical and reliable navigation strategy for autonomous mobile robots.A line tracking robot is a self-mobile machine that can recognize and track a painted line on thefloor.In general,the path is set and can be visible,such as a black line on a white surface with high contrasting colors.The robot’s path is marked by a distinct line or track,which the robot follows to move.Several scientific contributions from the disciplines of vision and control have been made to mobile robot vision-based navigation.Localization,automated map generation,autonomous navigation and path tracking is all becoming more frequent in vision applications.A visual navigation line tracking robot should detect the line with a camera using an image processing technique.The paper focuses on combining computer vision techniques with a proportional-integral-derivative(PID)control-ler for automatic steering and speed control.A prototype line tracking robot is used to evaluate the proposed control strategy.展开更多
To resolve the response delay and overshoot problems of intelligent vehicles facing emergency lane-changing due to proportional-integral-differential(PID)parameter variation,an active steering control method based on ...To resolve the response delay and overshoot problems of intelligent vehicles facing emergency lane-changing due to proportional-integral-differential(PID)parameter variation,an active steering control method based on Convolutional Neural Network and PID(CNNPID)algorithm is constructed.First,a steering control model based on normal distribution probability function,steady constant radius steering,and instantaneous lane-change-based active for straight and curved roads is established.Second,based on the active steering control model,a three-dimensional constraint-based fifth-order polynomial equation lane-change path is designed to address the stability problem with supersaturation and sideslip due to emergency lane changing.In addition,a hierarchical CNNPID Controller is constructed which includes two layers to avoid collisions facing emergency lane changing,namely,the lane change path tracking PID control layer and the CNN control performance optimization layer.The scaled conjugate gradient backpropagation-based forward propagation control law is designed to optimize the PID control performance based on input parameters,and the elastic backpropagation-based module is adopted for weight correction.Finally,comparison studies and simulation/real vehicle test results are presented to demonstrate the effectiveness,significance,and advantages of the proposed controller.展开更多
This paper presents the design and performance analysis of Differential Evolution(DE)algorithm based Proportional-Integral-Derivative(PID)controller for temperature control of Continuous Stirred Tank Reactor(CSTR)plan...This paper presents the design and performance analysis of Differential Evolution(DE)algorithm based Proportional-Integral-Derivative(PID)controller for temperature control of Continuous Stirred Tank Reactor(CSTR)plant in che-mical industries.The proposed work deals about the design of Differential Evolu-tion(DE)algorithm in order to improve the performance of CSTR.In this,the process is controlled by controlling the temperature of the liquid through manip-ulation of the coolantflow rate with the help of modified Model Reference Adap-tive Controller(MRAC).The transient response of temperature process is improved by using PID Controller,Differential Evolution Algorithm based PID and fuzzy based DE controller.Finally,the temperature response is compared with experimental results of CSTR.展开更多
Two novel improved variants of reptile search algorithm(RSA),RSA with opposition-based learning(ORSA)and hybrid ORSA with pattern search(ORSAPS),are proposed to determine the proportional,integral,and derivative(PID)c...Two novel improved variants of reptile search algorithm(RSA),RSA with opposition-based learning(ORSA)and hybrid ORSA with pattern search(ORSAPS),are proposed to determine the proportional,integral,and derivative(PID)controller parameters of an automatic voltage regulator(AVR)system using a novel objective function with augmented flexibility.In the proposed algorithms,the opposition-based learning technique improves the global search abilities of the original RSA algorithm,while the hybridization with the pattern search(PS)algorithm improves the local search abilities.Both algorithms are compared with the original RSA algorithm and have shown to be highly effective algorithms for tuning the PID controller parameters of an AVR system by getting superior results.Several analyses such as transient,stability,robustness,disturbance rejection,and trajectory tracking are conducted to test the performance of the proposed algorithms,which have validated the good promise of the proposed methods for controller designs.The performances of the proposed design approaches are also compared with the previously reported PID controller parameter tuning approaches to assess their success.It is shown that both proposed approaches obtain excellent and robust results among all compared ones.That is,with the adjustment of the weight factorα,which is introduced by the proposed objective function,for a system with high bandwitdh(α=1),the proposed ORSAPS-PID system has 2.08%more bandwidth than the proposed ORSA-PID system and 5.1%faster than the fastest algorithm from the literature.On the other hand,for a system where high phase and gain margins are desired(α=10),the proposed ORSA-PID system has 0.53%more phase margin and 2.18%more gain margin than the proposed ORSAPS-PID system and has 0.71%more phase margin and 2.25%more gain margin than the best performing algorithm from the literature.展开更多
Interacting The highest storage capacity of a circular tank makes it pop-ular in process industries.Because of the varying surface area of the cross-sec-tions of the tank,this two-tank level system has nonlinear chara...Interacting The highest storage capacity of a circular tank makes it pop-ular in process industries.Because of the varying surface area of the cross-sec-tions of the tank,this two-tank level system has nonlinear characteristics.Controlling theflow rate of liquid is one of the most difficult challenges in the production process.This proposed effort is critical in preventing time delays and errors by managing thefluid level.Several scholars have explored and explored ways to reduce the problem of nonlinearity,but their techniques have not yielded better results.Different types of controllers with various techniques are implemented by the proposed system.Sliding Mode Controller(SMC)with Fractional Order PID Controller based on Intelligent Adaptive Neuro-Fuzzy Infer-ence System(ANFIS)is a novel technique for liquid level regulation in an inter-connected spherical tank system to avoid interferences and achieve better performance in comparison of rise time,settling time,and overshoot decrease.Evaluating the simulated results acquired by the controller yields the efficiency of the proposed system.The simulated results were produced using MATLAB 2018 and the FOMCON toolbox.Finally,the performance of the conventional controller(FOPID,PID-SMC)and proposed ANFIS based SMC-FOPID control-lers are compared and analyzed the performance indices.展开更多
The paper presents a method of using single neuron adaptive PID control for adjusting system or servo system to implement timber drying process control, which combines the thought of parameter adaptive PID control and...The paper presents a method of using single neuron adaptive PID control for adjusting system or servo system to implement timber drying process control, which combines the thought of parameter adaptive PID control and the character of neural network on exactly describing nonlinear and uncertainty dynamic process organically. The method implements functions of adaptive and self-learning by adjusting weighting parameters. Adaptive neural network can make some output trail given hoping value to decouple in static state. The simulation result indicates the validity, veracity and robustness of the method used in the timber drying process展开更多
Long-period pulses in near-field earthquakes lead to large displacements in the base of isolated structures.To dissipate energy in isolated structures using semi-active control,piezoelectric friction dampers（PFD） ca...Long-period pulses in near-field earthquakes lead to large displacements in the base of isolated structures.To dissipate energy in isolated structures using semi-active control,piezoelectric friction dampers（PFD） can be employed.The performance of a PFD is highly dependent on the strategy applied to adjust its contact force.In this paper,the seismic control of a benchmark isolated building equipped with PFD using PD/PID controllers is developed.Using genetic algorithms,these controllers are optimized to create a balance between the performance and robustness of the closed-loop structural system.One advantage of this technique is that the controller forces can easily be estimated.In addition,the structure is equipped with only a single sensor at the base floor to measure the base displacement.Considering seven pairs of earthquakes and nine performance indices,the performance of the closed-loop system is evaluated.Then,the results are compared with those given by two well-known methods：the maximum possive operation of piezoelectric friction dampers and LQG controllers.The simulation results show that the proposed controllers perform better than the others in terms of simultaneous reduction of floor acceleration and maximum displacement of the isolator.Moreover,they are able to reduce the displacement of the isolator systems for different earthquakes without losing the advantages of isolation.展开更多
The control of dynamic nonlinear systems with unknown backlash was considered. By using an efficient approach to estimate the unknown backlash parameters, a rule? based backlash compensator was presented for cancelin...The control of dynamic nonlinear systems with unknown backlash was considered. By using an efficient approach to estimate the unknown backlash parameters, a rule? based backlash compensator was presented for canceling the effect of backlash. Adaptive nonlinear PID controller together with rule? based backlash compensator was developed and a satisfactory tracking performance was achieved. Simulation results demonstrated the effectiveness of the proposed method.展开更多
In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tens...In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.展开更多
基金This research was funded by the Deputyship for Research&Innovation,Ministry of Education in Saudi Arabia through the project number“IF_2020_NBU_434”.
文摘In this study,a bald eagle optimizer(BEO)is used to get optimal parameters of the fractional-order proportional-integral-derivative(FOPID)controller for load frequency control(LFC).SinceBEOtakes only a very short time in finding the optimal solution,it is selected for designing the FOPID controller that improves the system stability and maintains the frequency within a satisfactory range at different loads.Simulations and demonstrations are carried out using MATLAB-R2020b.The performance of the BEOFOPID controller is evaluated using a two-zone interlinked power system at different loads and under uncertainty of wind and solar energies.The robustness of the BEO-FOPID controller is examined by testing its performance under varying system time constants.The results obtained by the BEOFOPID controller are compared with those obtained by BEO-PID and PID controllers based on recent metaheuristics optimization algorithms,namely the sine-cosine approach,Jaya approach,grey wolf optimizer,genetic algorithm,bacteria foraging optimizer,and equilibrium optimization algorithm.The results confirm that the BEO-FOPID controller obtains the finest result,with the lowest frequency deviation.The results also confirm that the BEOFOPID controller is stable and robust at different loads,under varying system time constants,and under uncertainty of wind and solar energies.
基金Sponsored by the Key Construction Program of the"985"Program (1010012047201)
文摘A plant-friendly proportional-integral-derivative （PID） controller optimization framework is proposed to make tradeoffs among set-point response,controller output variations and robustness.The objective function is chosen as the weighted sum of the integral of squared time-weighted error and the integral of squared timeweighted derivative of the control variable with respect to set-point response,while the robustness of the system is guaranteed by constraints on gain and phase margins.Due to the complex structure of the constraints,the problem is solved by genetic algorithms.Simulation analysis show the proposed method could efficiently reduce the controller output variations while maintaining a short settling time.Based on the simulation results,iterative tuning rules for the weighting factor in the objective function are obtained,which allows efficient simple proportional-integral（PI） tuning formulae to be derived.
文摘The present paper studies the use of genetic algorithm to optimize the tuning of the Proportional, Integral and Derivative (PID) controller. Two control criteria were considered, the integral of the time multiplied by the absolute error (ITAE), and the integral of the time multiplied by the absolute output (ITAY). The time variant plant tested is a first-order plant with time delay. We aim at a real time implementation inside a digital board, so, the previous continuous approach was discretized and tested;the corresponding control algorithm is presented in this paper. The genetic algorithms and the PID controller are executed using the soft processor NIOS II in the Field Programmable Gate Array (FPGA). The computational results show the robustness and versatility of this technology.
基金supported by the Scientific Research Projects of Higher Education Institutions in Hebei Province(Grant No.QN2023188)the project of Hebei University of Science and Technology(Grant No.1200752).
文摘Quadrotor unmanned aerial vehicles(UAVs)are widely used in inspection,agriculture,express delivery,and other fields owing to their low cost and high flexibility.However,the current UAV control system has shortcomings such as poor control accuracy and weak anti-interference ability to a certain extent.To address the control problem of a four-rotor UAV,we propose a method to enhance the controller’s accuracy by considering underactuated dynamics,nonlinearities,and external disturbances.A mathematical model is constructed based on the flight principles of the quadrotor UAV.We develop a control algorithm that combines humanoid intelligence with a cascade Proportional-Integral-Derivative(PID)approach.This algorithm incorporates the rate of change of the error into the inputs of the cascade PID controller,uses both the error and its rate of change as characteristic variables of the UAV’s control system,and employs a hyperbolic tangent function to improve the outer-loop control.The result is a double closed-loop intelligent PID(DCLIPID)control algorithm.Through MATLAB numerical simulation tests,it is found that the DCLIPID algorithm reduces the rise time by 0.5 s and the number of oscillations by 2 times compared to the string PID algorithm when a unit step signal is used as input.A UAV flight test was designed for comparison with the serial PID algorithm,and it was found that when the UAV planned the trajectory autonomously,the errors in the X-,Y-,and Z-directions were reduced by 0.22,0.21,and 0.31 m,respectively.Under the interference environment of artificial wind about 3.6 m·s-1,the UAV hovering error in X-,Y-,and Z-directions are 0.24,0.42,and 0.27 m,respectively.The simulation and experimental results show that the control method of humanoid intelligence and cascade PID can improve the real-time,control accuracy and anti-interference ability of the UAV,and the method has a certain reference value for the research in the field of UAV control.
文摘In the practice of control the industrial processes, proportional-integral-derivative controller remains pivotal due to its simple structure and system performance-oriented tuning process. In this paper are presented two approaches for synthesis the proportional-integral-derivative controller to the models of objects with inertia, that offer the procedure of system performance optimization based on maximum stability degree criterion. The proposed algorithms of system performance optimization were elaborated for model of objects with inertia second and third order and offer simple analytical expressions for tuning the PID controller. Validation and verification are conducted through computer simulations using MATLAB, demonstrating successful performance optimization and showcasing the effectiveness PID controllers’ tuning. The proposed approaches contribute insights to the field of control, offering a pathway for optimizing the performance of second and third-order inertial systems through robust controller synthesis.
文摘To address the challenge of achieving unified control across diverse nonlinear systems, a comprehensive control theory spanning from PID (Proportional-Integral-Derivative) to ACPID (Auto-Coupling PID) has been proposed. The primary concept is to unify all intricate factors, including internal dynamics and external bounded disturbance, into a single total disturbance. This enables the mapping of various nonlinear systems onto a linear disturbance system. Based on the theory of PID control and the characteristic equation of a critically damping system, Zeng’s stabilization rules (ZSR) and an ACPID control force based on a single speed factor have been designed. ACPID control theory is both simple and practical, with significant scientific significance and application value in the field of control engineering.
文摘In this paper, the problem of stabilizing an unstable second order delay system using classical proportional-integralderivative(PID) controller is considered. An extension of the Hermite-Biehler theorem, which is applicable to quasi-polynomials, is used to seek the set of complete stabilizing proportional-integral/proportional-integral-derivative(PI/PID) parameters. The range of admissible proportional gains is determined in closed form. For each proportional gain, the stabilizing set in the space of the integral and derivative gains is shown to be a triangle.
基金NPRP grant NPRP09-1153-2-450 from the Qatar National Research Fund(a member of Qatar Foundation).
文摘This paper presents an approach to design proportional-integral-derivative controllers for inductionmachines usingmeasurements.Most controlmethods developed for induc-tion machines are generally based on mathematical models.Due to complex dynamics of induction machines,identified models are often unable to perfectly describe their behaviour.Thus,the system performance will be limited by the quality of the identified model.Hence,developing control methods that do not require the availability of system model is advantageous.Here,we propose an approach that uses the frequency response data to directly design controllers.The main idea here is to find controller parameters so that the closed-loop frequency response fits a desired frequency response.Its main advantage is that errors associated with the modelling process are avoided.Moreover,the control design process does not depend on the order and complexity of the plant.A practical application to induction machines illustrates the efficacy of the proposed approach.
文摘In this paper, simulated and experimental results on the conical tank level control are presented. PI/PID controllers of integer order （IO） as well as of fractional order （FO） are studied and compared. The tuning parameters are obtained first by using root locus （RL） and Ziegler and Nichols methods, for comparison purposes. Next, particle swarm optimization （PSO） is employed to determine the optimal controllers＇ parameters using as fitness function the integral of the absolute value of tracking error （IAE）. From the experimental results it is concluded that PI/FOPI are the controllers presenting the lowest IAE indexes, whereas PID/FOPID controllers present the lowest energy consumption by the control signal.
文摘The execution of the gaits generated with the help of a gait planner is a crucial task in biped locomotion. This task is to be achieved with the help of a suitable torque based controller to ensure smooth walk of the biped robot. It is important to note that the success of the developed proportion integration differentiation （PID） controller depends on the selected gains of the controller. In the present study, an attempt is made to tune the gains of the PID controller for the biped robot ascending and descending the stair case and sloping surface with the help of two non-traditional optimization algorithms, namely modified chaotic invasive weed optimization （MCIWO） and particle swarm optimization （PSO） algorithms. Once the optimal PID controllers are developed, a simulation study has been conducted in computer for obtaining the optimal tuning parameters of the controller of the biped robot. Finally, the optimal gait angles obtained by using the best controller are fed to the real biped robot and found that the biped robot has successfully negotiated the said terrains.
文摘With the rapid development of network technology and control technology,a networked multi-agent control system is a key direction of modern industrial control systems,such as industrial Internet systems.This paper studies the tracking control problem of networked multi-agent systems with communication constraints,where each agent has no information on the dynamics of other agents except their outputs.A networked predictive proportional integral derivative(PPID)tracking scheme is proposed to achieve the desired tracking performance,compensate actively for communication delays,and simplify implementation in a distributed manner.This scheme combines the past,present and predictive information of neighbour agents to form a tracking error signal for each agent,and applies the proportional,integral,and derivative of the agent tracking error signal to control each individual agent.The criteria of the stability and output tracking consensus of multi-agent systems with the networked PPID tracking scheme are derived through detailed analysis on the closed-loop systems.The effectiveness of the networked PPID tracking scheme is illustrated via an example.
基金funding from the researchers supporting project number(RSP2022R474)King Saud University,Riyadh,Saudi Arabia.
文摘In a controlled indoor environment,line tracking has become the most practical and reliable navigation strategy for autonomous mobile robots.A line tracking robot is a self-mobile machine that can recognize and track a painted line on thefloor.In general,the path is set and can be visible,such as a black line on a white surface with high contrasting colors.The robot’s path is marked by a distinct line or track,which the robot follows to move.Several scientific contributions from the disciplines of vision and control have been made to mobile robot vision-based navigation.Localization,automated map generation,autonomous navigation and path tracking is all becoming more frequent in vision applications.A visual navigation line tracking robot should detect the line with a camera using an image processing technique.The paper focuses on combining computer vision techniques with a proportional-integral-derivative(PID)control-ler for automatic steering and speed control.A prototype line tracking robot is used to evaluate the proposed control strategy.
基金Supported by National Key R&D Program of China(Grant No.2018YFB1600500)Jiangsu Provincial Postgraduate Research&Practice Innovation Program of(Grant No.KYCX22_3673).
文摘To resolve the response delay and overshoot problems of intelligent vehicles facing emergency lane-changing due to proportional-integral-differential(PID)parameter variation,an active steering control method based on Convolutional Neural Network and PID(CNNPID)algorithm is constructed.First,a steering control model based on normal distribution probability function,steady constant radius steering,and instantaneous lane-change-based active for straight and curved roads is established.Second,based on the active steering control model,a three-dimensional constraint-based fifth-order polynomial equation lane-change path is designed to address the stability problem with supersaturation and sideslip due to emergency lane changing.In addition,a hierarchical CNNPID Controller is constructed which includes two layers to avoid collisions facing emergency lane changing,namely,the lane change path tracking PID control layer and the CNN control performance optimization layer.The scaled conjugate gradient backpropagation-based forward propagation control law is designed to optimize the PID control performance based on input parameters,and the elastic backpropagation-based module is adopted for weight correction.Finally,comparison studies and simulation/real vehicle test results are presented to demonstrate the effectiveness,significance,and advantages of the proposed controller.
文摘This paper presents the design and performance analysis of Differential Evolution(DE)algorithm based Proportional-Integral-Derivative(PID)controller for temperature control of Continuous Stirred Tank Reactor(CSTR)plant in che-mical industries.The proposed work deals about the design of Differential Evolu-tion(DE)algorithm in order to improve the performance of CSTR.In this,the process is controlled by controlling the temperature of the liquid through manip-ulation of the coolantflow rate with the help of modified Model Reference Adap-tive Controller(MRAC).The transient response of temperature process is improved by using PID Controller,Differential Evolution Algorithm based PID and fuzzy based DE controller.Finally,the temperature response is compared with experimental results of CSTR.
文摘Two novel improved variants of reptile search algorithm(RSA),RSA with opposition-based learning(ORSA)and hybrid ORSA with pattern search(ORSAPS),are proposed to determine the proportional,integral,and derivative(PID)controller parameters of an automatic voltage regulator(AVR)system using a novel objective function with augmented flexibility.In the proposed algorithms,the opposition-based learning technique improves the global search abilities of the original RSA algorithm,while the hybridization with the pattern search(PS)algorithm improves the local search abilities.Both algorithms are compared with the original RSA algorithm and have shown to be highly effective algorithms for tuning the PID controller parameters of an AVR system by getting superior results.Several analyses such as transient,stability,robustness,disturbance rejection,and trajectory tracking are conducted to test the performance of the proposed algorithms,which have validated the good promise of the proposed methods for controller designs.The performances of the proposed design approaches are also compared with the previously reported PID controller parameter tuning approaches to assess their success.It is shown that both proposed approaches obtain excellent and robust results among all compared ones.That is,with the adjustment of the weight factorα,which is introduced by the proposed objective function,for a system with high bandwitdh(α=1),the proposed ORSAPS-PID system has 2.08%more bandwidth than the proposed ORSA-PID system and 5.1%faster than the fastest algorithm from the literature.On the other hand,for a system where high phase and gain margins are desired(α=10),the proposed ORSA-PID system has 0.53%more phase margin and 2.18%more gain margin than the proposed ORSAPS-PID system and has 0.71%more phase margin and 2.25%more gain margin than the best performing algorithm from the literature.
文摘Interacting The highest storage capacity of a circular tank makes it pop-ular in process industries.Because of the varying surface area of the cross-sec-tions of the tank,this two-tank level system has nonlinear characteristics.Controlling theflow rate of liquid is one of the most difficult challenges in the production process.This proposed effort is critical in preventing time delays and errors by managing thefluid level.Several scholars have explored and explored ways to reduce the problem of nonlinearity,but their techniques have not yielded better results.Different types of controllers with various techniques are implemented by the proposed system.Sliding Mode Controller(SMC)with Fractional Order PID Controller based on Intelligent Adaptive Neuro-Fuzzy Infer-ence System(ANFIS)is a novel technique for liquid level regulation in an inter-connected spherical tank system to avoid interferences and achieve better performance in comparison of rise time,settling time,and overshoot decrease.Evaluating the simulated results acquired by the controller yields the efficiency of the proposed system.The simulated results were produced using MATLAB 2018 and the FOMCON toolbox.Finally,the performance of the conventional controller(FOPID,PID-SMC)and proposed ANFIS based SMC-FOPID control-lers are compared and analyzed the performance indices.
基金the Key Technologies R&D Program of Harbin (0111211102).
文摘The paper presents a method of using single neuron adaptive PID control for adjusting system or servo system to implement timber drying process control, which combines the thought of parameter adaptive PID control and the character of neural network on exactly describing nonlinear and uncertainty dynamic process organically. The method implements functions of adaptive and self-learning by adjusting weighting parameters. Adaptive neural network can make some output trail given hoping value to decouple in static state. The simulation result indicates the validity, veracity and robustness of the method used in the timber drying process
文摘Long-period pulses in near-field earthquakes lead to large displacements in the base of isolated structures.To dissipate energy in isolated structures using semi-active control,piezoelectric friction dampers（PFD） can be employed.The performance of a PFD is highly dependent on the strategy applied to adjust its contact force.In this paper,the seismic control of a benchmark isolated building equipped with PFD using PD/PID controllers is developed.Using genetic algorithms,these controllers are optimized to create a balance between the performance and robustness of the closed-loop structural system.One advantage of this technique is that the controller forces can easily be estimated.In addition,the structure is equipped with only a single sensor at the base floor to measure the base displacement.Considering seven pairs of earthquakes and nine performance indices,the performance of the closed-loop system is evaluated.Then,the results are compared with those given by two well-known methods：the maximum possive operation of piezoelectric friction dampers and LQG controllers.The simulation results show that the proposed controllers perform better than the others in terms of simultaneous reduction of floor acceleration and maximum displacement of the isolator.Moreover,they are able to reduce the displacement of the isolator systems for different earthquakes without losing the advantages of isolation.
文摘The control of dynamic nonlinear systems with unknown backlash was considered. By using an efficient approach to estimate the unknown backlash parameters, a rule? based backlash compensator was presented for canceling the effect of backlash. Adaptive nonlinear PID controller together with rule? based backlash compensator was developed and a satisfactory tracking performance was achieved. Simulation results demonstrated the effectiveness of the proposed method.
基金funded by the National Natural Science Foundation of China(Grant Number 52075361)Shanxi Province Science and Technology Major Project(Grant Number 20201102003)+3 种基金Lvliang Science and Technology Guidance Special Key R&D Project(Grant Number 2022XDHZ08)National Natural Science Foundation of China(Grant Number 51905367)Shanxi Natural Science Foundation General Project(Grant Numbers 202103021224271,202203021211201)Shanxi Province Key Research and Development Plan(Grant Number 202102020101013).
文摘In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.
