Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulator...Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulators such as tannin,water glass,sodium carbon-ate,and sodium hexametaphosphate are more widely used in industry.However,they are rarely used as the main regulators in research because they perform poorly in magnesite and dolomite single-mineral flotation tests.Inspired by the limonite presedimentation method and the addition of a regulator to magnesite slurry mixing,we used a tannin pretreatment method for separating magnesite and dolomite.Microflotation experiments confirmed that the tannin pretreatment method selectively and largely reduces the flotation recovery rate of dolomite without affecting the flotation recovery rate of magnesite.Moreover,the contact angles of the tannin-pretreated magnesite and dolomite increased and decreased,respectively,in the presence of NaOl.Zeta potential and Fourier transform infrared analyses showed that the tannin pretreatment method efficiently hinders NaOl adsorption on the dolomite surface but does not affect NaOl adsorption on the magnesite surface.X-ray photoelectron spectroscopy and density functional theory calculations confirmed that tannin interacts more strongly with dolomite than with magnesite.展开更多
In this editorial,we offer our perspective on the groundbreaking study entitled“Hypoxia and inflammatory factor preconditioning enhances the immunosup-pressive properties of human umbilical cord mesenchymal stem cell...In this editorial,we offer our perspective on the groundbreaking study entitled“Hypoxia and inflammatory factor preconditioning enhances the immunosup-pressive properties of human umbilical cord mesenchymal stem cells”,recently published in World Journal of Stem Cells.Despite over three decades of research on the clinical application of mesenchymal stem cells(MSCs),only a few therapeutic products have made it to clinical use,due to multiple preclinical and clinical challenges yet to be addressed.The study proved the hypoxia and inflammatory factor preconditioning led to higher immunosuppressive effects of MSCs without damaging their biological characteristics,which revealed the combination of inflammatory factors and hypoxic preconditioning offers a promising approach to enhance the function of MSCs.As we delve deeper into the intricacies of pretreat-ment methodologies,we anticipate a transformative shift in the landscape of MSC-based therapies,ultimately contributing to improved patient outcomes and advancing the field as a whole.展开更多
This research was undertaken to study the effect of Zr-enhanced plasma electrolytic oxidation(PEO) as a pretreatment on the corrosion performance of epoxy coating applied on Magnesium in 3.5 wt.% Na Cl solution. The p...This research was undertaken to study the effect of Zr-enhanced plasma electrolytic oxidation(PEO) as a pretreatment on the corrosion performance of epoxy coating applied on Magnesium in 3.5 wt.% Na Cl solution. The parameters of delamination index along with coating damage index were extracted through electrochemical impedance spectroscopy(EIS) tests to determine how Zr may affect the corrosion protection of duplex PEO/epoxy coated samples. Pull-off adhesion tests were also accomplished to form a better understanding of Zr-enhanced PEO coating’ function. According to the obtained results, the presence of Zr can reduce the damage to the coating system by almost twice.展开更多
In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ...In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ80 Mg alloy were investigated.Citric acid(CA)was used to activate the alloy surface during the pretreatment process.The alloy was first pretreated with CA and then subjected to a hydrothermal process using ultrapure water to produce Mg-Al-LDH/Mg(OH)_(2)steam coating.The effect of different time of acid pretreatment on the activation of the intermetallic compounds was investigated.The microstructure and elemental composition of the obtained coatings were analyzed using FE-SEM,EDS,XRD and FT-IR.The corrosion resistance of the coated samples was evaluated using different techniques,i.e.,potentiodynamic polarization(PDP),electrochemical impedance spectrum(EIS)and hydrogen evolution test.The results indicated that the CA pretreatment significantly influenced the activity of the alloy surface by exposing the intermetallic compounds.The surface area fraction of Mg_(17)Al_(12)and Al_(8)Mn_(5)phases on the surface of the alloy was significantly higher after the CA pretreatment,and thus promoted the growth of the subsequent Mg-Al-LDH coatings.The CA pretreatment for 30 s resulted in a denser and thicker LDH coating.Increase in the CA pretreatment time significantly led to the improvement in corrosion resistance of the coated AZ80 alloy.The corrosion current density of the coated alloy was lower by three orders of magnitude as compared to the uncoated alloy.展开更多
The quality and flavor of scallops changes during the fresh dry rehydration process.In order to control the changes after rehydration,a scallop pretreatment method was adopted.The pretreatment method involved impregna...The quality and flavor of scallops changes during the fresh dry rehydration process.In order to control the changes after rehydration,a scallop pretreatment method was adopted.The pretreatment method involved impregnating fresh scallops with 0.2 g/100 m L konjac glucomannan(KGM),carrageenan(CA),and sodium alginate(SA)before the drying and rehydration process.After rehydration,the KGM treated samples had better water retention and the highest betaine content.The CA treated samples had a deepened yellow color and the highest content of flavoring amino acids(FAA)and inosine monophosphate(IMP).What’s more,a total of 77 volatile compounds were detected,with a maximum of 15 esters.The highest proportion in the four groups was eugenol,followed by n-hexadecanoic acid,methyl hexadecanoate etc.The SA group had no significant contribution in terms of quality and taste.The samples pretreated with KGM had the best quality,and those pretreated by CA had the best flavor.展开更多
Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High...Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.展开更多
The effects of sulfuric acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust were investigated in this study.Sulfuric acid could act as an acidic catalyst to depolymerize holocellulose th...The effects of sulfuric acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust were investigated in this study.Sulfuric acid could act as an acidic catalyst to depolymerize holocellulose through cleavage of the glycosidic bonds,the dissociation energies of which were supplied by the impact of a ball on pine sawdust,during milling.The destruction of glycosidic and hydrogen bonds in pine sawdust resulted in a decrease of crystallinity and an increase of water solubility.The sulfuric acid could promote the hydrolysis of holocellulose and its hydrolysis products.It also destroyed the chemical linkages between holocellulose and lignin during ball milling.The cleavage of chemical linkages with holocellulose made lignin more difficult to hydrolyze in subcritical water,and higher activation energy was needed to hydrolyze pretreated pine sawdust at higher reaction temperatures.It also led to the formation of glucose char and aromatic-linked polymer char from the hydrolysis products of holocellulose.展开更多
Selective surface dissolution was found to be important in spodumene flotation. In this study, we proposed to introduce ultrasound into the pretreatment process to accelerate particle vibration and cavitation, as well...Selective surface dissolution was found to be important in spodumene flotation. In this study, we proposed to introduce ultrasound into the pretreatment process to accelerate particle vibration and cavitation, as well as the migration of mineral surface components to solution. Micro-flotation results showed that the flotation recovery of spodumene can be 86.08% by ultrasound pretreatment, but only 39.30% by traditional mechanical agitation pretreatment. Compared with traditional mechanical agitation, ultrasonic pretreatment can shorten the pretreatment process, reduce the dosage of agents, reduce the mechanical agitation speed, and improve the efficiency of the pretreating process. Inductively coupled plasma analysis showed that, in the ultrasonic system, the amount of Li, Al, and Si species in the solution was twice as much as those in the traditional preprocessing system. Moreover, the scanning electron microscope results demonstrated a larger surface dissolution area in the ultrasonic system. X-Ray photoelectron spectroscopy results showed that the atomic concentration of Si species on the spodumene surface decreased, whereas the relative atomic concentrations of Li and Al species increased, indicating that the ultrasound effect strengthened the selective dissolution of elements on the mineral surface.The high-resolution spectra of O 1s showed that more collectors are adsorbed on the mineral surface treated by ultrasonic pretreatment.展开更多
In the open ocean,radium isotopes are useful tracers of residence time and water-mass mixing.However,limited by the measurement resolution of commonly used gamma counters,the low activity of radium in the open ocean m...In the open ocean,radium isotopes are useful tracers of residence time and water-mass mixing.However,limited by the measurement resolution of commonly used gamma counters,the low activity of radium in the open ocean makes it necessary to enrich radium from large volumes of seawater and pretreat radium-enriched carriers prior to measurements.The commonly applied method of radium enrichment and pretreatment,however,has limitations of uneven coating of MnO_(2)on cartridges,relatively expensive cartridges,time-consuming issues during cartridge-ashing,ash loss during transfer,and changes of gamma counters efficiency caused by different ash weights.To address these issues,in this study we optimized the enrichment and pretreatment of low-activity radium prior to measurements.Firstly,we replaced commonly used acrylic cartridges with cheaper polypropylene cartridges,which took 6 h to be ashed,42 h shorter than for acrylic cartridges.Secondly,MnO_(2)-coated cartridges were prepared with a circulating hot acidic KMnO_(4)solution to ensure homogeneous coating.The radium extraction efficiency of this MnO_(2)-coated cartridge was 20%-61%higher than that prepared by directly immersing cartridges in the solution.The radium delayed coincidence counter efficiency for MnO_(2)-coated cartridge was stable with a moisture content of 0.05-1.Lastly,after ashing cartridges,instead of directly transferring the ash to a measurement vial,a mixture of hydroxylamine hydrochloride and hydrochloric acid was used to completely leach the ash for long-lived radium,followed by coprecipitation by BaSO_(4),to avoid potential loss of ash during transfer and variations in measurement geometry due to different ash weights.And the recovery of long-lived radium pretreatment was 94%-102%,which improved by 11%compared with the common method.In addition,the radium extraction efficiency of the MnO_(2)-coated cartridge varied from 3%to 4%within the in situ pump working flow rate of 4-7 L/min,which fell within the measurement errors.展开更多
Two carbonation approaches are considered for studying the effects on the hardening mechanisms of slurries made of 100 wt%electric arc furnace steel slag (EAF) slag or 80 wt%EAF slag incorporating 20 wt% of Portland c...Two carbonation approaches are considered for studying the effects on the hardening mechanisms of slurries made of 100 wt%electric arc furnace steel slag (EAF) slag or 80 wt%EAF slag incorporating 20 wt% of Portland cement,which are applied during the hot-stage pretreatment with simulated gas for raw steel slag or the accelerated carbonation curing of slurry.The mechanical strengths,carbonate products,microstructures and CO_(2) uptakes were quantitatively investigated.Results manifest that accelerated carbonation curing increases the compressive strengths of steel slag slurry,from 17.1 MPa (binder of 80 wt% EAF and 20 wt%cement under standard moisture curing) to 36.0 MPa (binder of 80 wt%EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 52%.In contrast,hot-stage carbonation applied during the pretreatment of steel slag increases the compressive strengths to 43.7 MPa (binder of 80 wt%carbonated EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 67%.Hotstage carbonation of steel slag is found for particle agglomeration,minerals remodeling and calcite formed,thus causing an activated steel slag with a dense structure and more active components.Accelerated carbonation curing of steel slag slurry paste results in the newly formed amorphous CaCO_(3),calcite crystalline and silica gels that covered the pores of the matrix,facilitating microstructure densification and strength improvement.Adopting the combinative methods of the hot-stage CO_(2) pretreatment and accelerated carbonation curing creates a promising high-volume steel slag-based binder with high strengths and CO_(2) storage.展开更多
A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil.The characterization results demonstrated that microbial pretreatment ...A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil.The characterization results demonstrated that microbial pretreatment was an effective method to decrease the lignin,which can achieve a maximum removal rate of 44.19%.Due to the destruction of biomass structure,the content of alkali metal and alkaline earth metal is reduced.Meanwhile,the depolymerized biomass structure created better pyrolysis conditions to promote the pyrolysis efficiency,increase the average decomposition rate of pyrolysis and reduce the residue.In fast pyrolysis,because of the enrichment of cellulose and the removal of lignin,the contents of acids,linear carbonyls,furans,and sugars increased while the contents of phenols decreased.As for the catalytic pyrolysis,due to the hydrocarbon pool reaction and shape selection deoxidation of ZSM-5 catalyst,the total hydrocarbon and aromatics contents can significantly increase up to 34.37%and 30.59%,respectively,with 3 weeks of pretreatment.And the the low molecular content of bio-oil increased after pretreatment,which can significantly benefit the entry of primary pyrolysis steam into the catalyst pores to improve the catalytic efficiency and hydrocarbon contents.This method provides a new treatment idea for high-quality utilization of biomass.展开更多
Corn stalk hydrothermal wastewater(CSHW)was used as a pretreatment for whole-slurry anaerobic co-digestion instead of conventional acid pretreatment.CSHW pretreatment was conducted at 20℃,35℃and 50℃for 3,6 and 9 h,...Corn stalk hydrothermal wastewater(CSHW)was used as a pretreatment for whole-slurry anaerobic co-digestion instead of conventional acid pretreatment.CSHW pretreatment was conducted at 20℃,35℃and 50℃for 3,6 and 9 h,after which all experimental groups were digested at 35℃for 24 days.This pretreatment method efficiently broke the lignocellulose structure of the corn stalk.Different from the volatile fatty acids(VFAs)content,the pH and RS contents were relatively higher than those of the control during the pretreatment process.Furthermore,the highest methane production[185.03 mL•g-1 VS(volatile solid)]was achieved at 55.46%under 35℃in 6 h,which was higher than that of the normal corn stalk anaerobic digestion.The VFAs contents and pH increased compared to CK upon the addition of NaOH to adjust pH,and the RS content also increased slightly due to the degradability of lignocellulose during the whole-slurry anaerobic co-digestion.This work provided a potential method to sustainably treat wastewater and improve fermentation performance.展开更多
Background: In developed countries, colon cancer is the second most prevalent cancer, only exceeded by prostate cancer in men and breast cancer in women. After Hepatocellular carcinoma, breast cancer, bladder cancer, ...Background: In developed countries, colon cancer is the second most prevalent cancer, only exceeded by prostate cancer in men and breast cancer in women. After Hepatocellular carcinoma, breast cancer, bladder cancer, lung cancer, Non-Hodgkin Lymphoma and brain tumors, colon cancer is the 7<sup>th</sup> most common cancer in Egypt, in both sexes, representing 3.47% and 3%, in both male and female cancers, respectively. Aim of the Work: The aim of this study was to evaluate the prognostic and predictive significance of pretreatment Neutrophil/lymphocytes ratio (NLR), in terms of disease-free survival (DFS) and recurrence, in high-risk stage II and stage III Colorectal cancer patients who underwent curative resection. Patients and Methods: We retrospectively evaluated 103 patients, who were submitted to upfront surgery as first therapeutic option in curative intent, between January 2017 and December 2018. Pretreatment Neutrophil/lymphocytes ratio (NLR), as well as demographics, clinical, histopathologic, and laboratory data were analyzed. Univariate and multivariate analyses were conducted to identify prognostic factors associated with disease free survival (DFS) and recurrence. Results: The cutoff point of Neutrophils/lymphocytes ratio (NLR) was calculated with Kaplan-Meier curves and log-rank test to 3. This study revealed that neutrophils/lymphocytes ratio (NLR) was significantly associated with disease free survival (p as no difference in efficacy between both chemotherapy regimens FOLFOX and XELOX in both high-risk stage II and stage III colon cancer regarding disease free survival & the toxicity profile associated with each regimen and its grades between patients. Conclusion: Our study suggests that preoperative Neutrophils/lymphocytes ratio (NLR) more than 3 may be an independent prognostic marker for TTR (time to recurrence) in high-risk stage II and stage III colon cancer patients.展开更多
Study on the coagulation of four species of red tide organisms（Nitzschia pungens,Skeletonema costatum,Prorocentrum minimum and Noctiluca scintillans）with montmorillonite,and the effect ofmontmorillonite pretreatment...Study on the coagulation of four species of red tide organisms（Nitzschia pungens,Skeletonema costatum,Prorocentrum minimum and Noctiluca scintillans）with montmorillonite,and the effect ofmontmorillonite pretreatment on the coagulation shows that the capability for montmorillonite to coagu-late with them is in the order:N.pungens】S.costatum】P.minimum】N.scintillans.Thecoagulation is discussed from the aspects of the structure,shape,size,movement,habit,etc.of differ-ent species and the results are explained theoretically.The experimental results also indicate that the treat-ment of montmorillonite with acid can enhance its coagulating capability.This is due to the fact that Al（OH<sub>2</sub>）<sub>6</sub><sup>+3</sup>,exchanged from the clay lattice by hydrogen ion H<sup>+</sup>,forms hydroxy-aluminum polymers on thesurface of the montmorillonite.The hydroxy-aluminum polymers positively charge and increase the positivecharacteristic of the clay surface,and also serves as a bridge between adjacent surfaces of particles.Thesetwo functions展开更多
The efficient development and utilization of high-phosphorus oolitic hematite is of great strategic significance for the sustainable supply of iron-ore resources in China.In this paper,the mechanism of high-temperatur...The efficient development and utilization of high-phosphorus oolitic hematite is of great strategic significance for the sustainable supply of iron-ore resources in China.In this paper,the mechanism of high-temperature pretreatment for enhancing the effect of iron enrichment and dephosphorization in the magnetization roasting–leaching process was studied by X-ray diffraction(XRD),vibration sample magnetometer(VSM),scanning electron microscopy and energy dispersive spectrometry(SEM–EDS).Compared with the process without high-temperature pretreatment,the iron grade of the magnetic separation concentrate after high-temperature pretreatment had increased by 0.98%,iron recovery rate had increased by 1.33%,and the phosphorus content in the leached residue had decreased by 0.12%.High-temperature pretreatment resulted in the dehydration and decomposition of hydroxyapatite,the dehydration of limonite and the thermal decomposition of siderite,which can produce pores and cracks and weaken the compactness of the ore,improve the magnetization characteristics of roasted ore,and strengthen the iron enrichment and dephosphorization during the magnetization roasting and leaching process.展开更多
Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polym...Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polymers are not soluble in common solvents, which hinders their pretreatment and conversion. Deep eutectic solvents(DESs) are environmental-friendly, cheap, and highly tunable, with high solubility,which renders them potential applications in biomass pretreatment and conversion. They could be used as solvents or catalysts and so on. This paper intends to review the application of DESs for the pretreatment of biomass and conversion of biomass to value-added products. We focus on the following topics related to biomass and DESs:(1) DESs for the pretreatment of biomass;(2) DESs for the dissolution and separation of biomass or extraction of chemicals from biomass;(3) DESs for biomass conversion;(4) Drawbacks, and recyclability of DESs for pretreatment and conversion of biomass.展开更多
Hydrophobic flocculation pretreatment was performed to assess its effect on the recovery of fine cuprite in sulfidation-flotation. The results of the micro-flotation experiment showed that cuprite recovery is related ...Hydrophobic flocculation pretreatment was performed to assess its effect on the recovery of fine cuprite in sulfidation-flotation. The results of the micro-flotation experiment showed that cuprite recovery is related to the particle size, and that an excessive content of fine particles(<18 μm) impacted the recovery of coarse particles. When hydrophobic flocculation pretreatment was used, the recovery of fine cuprite in sulfidation-flotation increased from 60.3% to 86.3% under optimum conditions(pH 9.5; sodium oleate concentration, 2 × 10^(-4) mol×L^(-1); stirring time, 6 min; stirring speed, 1600 r×min^(-1)). The laser particle size analysis and optical microscopy results indicate that hydrophobic flocculation pretreatment effectively reduces the content of fine cuprite, and augments the apparent particle size in the pulp. We performed the Derjaguin–Landau–Verwey–Overbeek(DLVO) theory and extended DLVO theory calculations to further support the interpretation of the results.展开更多
High-alkali species in coal are notorious for causing ash slagging and fouling incidents.In this paper,four high-alkali coals were individually subject to hydrothermal pretreatment(HTP),within a batch-type autoclave a...High-alkali species in coal are notorious for causing ash slagging and fouling incidents.In this paper,four high-alkali coals were individually subject to hydrothermal pretreatment(HTP),within a batch-type autoclave at 300 -C for 1 h,and the treated coals were analyzed,along with the oxygen-containing functional groups determined by Fourier transform infrared spectrometer(FT-IR).Then the alkali species and other components in the coal ash were quantified by X-ray fluorescence(XRF)for evaluating the ash slagging and fouling tendency.Apart from this,FactSage was adopted to simulate the occurrence and transformation of alkali species during coal thermal conversion ending at various temperatures.The findings indicate that the treated coals are superior to the parent ones in terms of certain remarkable changes via HTP.The moisture,oxygen and sulfur of the hydrothermally treated coals decline obviously,while the calorific value rises sharply.HTP could reduce the alkali species to less than 2%(%,by weight,equivalent to Na2O in dry ash),with a maximum removal ratio of 88.9%,lowering the ash slagging and fouling tendency.The proposed mechanism of HTP was that the alkali species in coal matrix became released due to the breakage of the coal functional groups and micropores during HTP.展开更多
We characterized the effects of KNO3 pretreatment and germination temperature on dormancy breaking and germination of mature mountain ash seeds. Seeds treated with KNO3 and germinated at 25 ℃ followed by 5 ℃ had sig...We characterized the effects of KNO3 pretreatment and germination temperature on dormancy breaking and germination of mature mountain ash seeds. Seeds treated with KNO3 and germinated at 25 ℃ followed by 5 ℃ had significantly higher germination percentages and germination potentials (51% and 49%, respectively), compared with controls. These treated seeds also exhibited reduced germination initiation times (minimum of 48 days), and elevated germination rate indices (up to 97). The germination of seeds subjected to long-term cold storage (2 years at 0-5 ℃) was also significantly improved by 3 days of 4% KNO3 pretreatment before germinating under a variable temperature regimen (5 ℃ followed by 25 ℃, and followed by 5 ℃). Germination percentages and germination potentials for these cold-stored seeds reached 67% and 54%, respectively, and the germination rate index increased to 126.99. Pretreatment of mountain ash seeds with KNO3 represents a practical, effective, and pollution-free method for improving germination, and can be implemented easily within a variety of nursery settings.展开更多
The application of microwave irradiation for pretreatment of copper anode slime with high nickel content prior to pressure sulfuric acid leaching has been proposed.The microwave-assisted pretreatment is a rapid and ef...The application of microwave irradiation for pretreatment of copper anode slime with high nickel content prior to pressure sulfuric acid leaching has been proposed.The microwave-assisted pretreatment is a rapid and efficient process.Through the technology of microwave assisted pretreatment-pressure leaching of copper anode slime,copper,tellurium,selenium and nickel are almost completely recovered.Under optimal conditions,the leaching efficiencies of copper,tellurium,selenium and nickel are 97.12%,95.97%,95.37% and 93.90%,respectively.The effect of microwave radiation on the temperature of copper anode slime and leaching solution is investigated.It is suggested that the enhancement on the recoveries of copper,tellurium and selenium can be attributed to the temperature gradient which is caused by shallow microwave penetration depth and super heating occurring at the solid–liquid interface.The kinetic study shows that the pressure leaching of copper anode slime,with and without microwave assisted pretreatment,are both controlled by chemical reactions on the surfaces of particles.It is found that the activation energy calculated for microwave-assisted pretreatment-pressure leaching(49.47 kJ/mol) is lower than that for pressure leaching which is without microwave assisted pretreatment(60.57 kJ/mol).展开更多
基金supported by the National Natural Science Foundation of China (Nos.51974064,52174239,and 52374259)the Open Project of the Key Laboratory of Solid Waste Treatment and Resource Utiliza-tion of the Ministry of Education,China (No.23kfgk02).
文摘Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulators such as tannin,water glass,sodium carbon-ate,and sodium hexametaphosphate are more widely used in industry.However,they are rarely used as the main regulators in research because they perform poorly in magnesite and dolomite single-mineral flotation tests.Inspired by the limonite presedimentation method and the addition of a regulator to magnesite slurry mixing,we used a tannin pretreatment method for separating magnesite and dolomite.Microflotation experiments confirmed that the tannin pretreatment method selectively and largely reduces the flotation recovery rate of dolomite without affecting the flotation recovery rate of magnesite.Moreover,the contact angles of the tannin-pretreated magnesite and dolomite increased and decreased,respectively,in the presence of NaOl.Zeta potential and Fourier transform infrared analyses showed that the tannin pretreatment method efficiently hinders NaOl adsorption on the dolomite surface but does not affect NaOl adsorption on the magnesite surface.X-ray photoelectron spectroscopy and density functional theory calculations confirmed that tannin interacts more strongly with dolomite than with magnesite.
基金National Natural Science Foundation of China,No.82172196,No.82372507,and No.81971891.
文摘In this editorial,we offer our perspective on the groundbreaking study entitled“Hypoxia and inflammatory factor preconditioning enhances the immunosup-pressive properties of human umbilical cord mesenchymal stem cells”,recently published in World Journal of Stem Cells.Despite over three decades of research on the clinical application of mesenchymal stem cells(MSCs),only a few therapeutic products have made it to clinical use,due to multiple preclinical and clinical challenges yet to be addressed.The study proved the hypoxia and inflammatory factor preconditioning led to higher immunosuppressive effects of MSCs without damaging their biological characteristics,which revealed the combination of inflammatory factors and hypoxic preconditioning offers a promising approach to enhance the function of MSCs.As we delve deeper into the intricacies of pretreat-ment methodologies,we anticipate a transformative shift in the landscape of MSC-based therapies,ultimately contributing to improved patient outcomes and advancing the field as a whole.
文摘This research was undertaken to study the effect of Zr-enhanced plasma electrolytic oxidation(PEO) as a pretreatment on the corrosion performance of epoxy coating applied on Magnesium in 3.5 wt.% Na Cl solution. The parameters of delamination index along with coating damage index were extracted through electrochemical impedance spectroscopy(EIS) tests to determine how Zr may affect the corrosion protection of duplex PEO/epoxy coated samples. Pull-off adhesion tests were also accomplished to form a better understanding of Zr-enhanced PEO coating’ function. According to the obtained results, the presence of Zr can reduce the damage to the coating system by almost twice.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.51601108 and 52071191)the Natural Science Foundation of Shandong Province(ZR2020ME011).
文摘In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ80 Mg alloy were investigated.Citric acid(CA)was used to activate the alloy surface during the pretreatment process.The alloy was first pretreated with CA and then subjected to a hydrothermal process using ultrapure water to produce Mg-Al-LDH/Mg(OH)_(2)steam coating.The effect of different time of acid pretreatment on the activation of the intermetallic compounds was investigated.The microstructure and elemental composition of the obtained coatings were analyzed using FE-SEM,EDS,XRD and FT-IR.The corrosion resistance of the coated samples was evaluated using different techniques,i.e.,potentiodynamic polarization(PDP),electrochemical impedance spectrum(EIS)and hydrogen evolution test.The results indicated that the CA pretreatment significantly influenced the activity of the alloy surface by exposing the intermetallic compounds.The surface area fraction of Mg_(17)Al_(12)and Al_(8)Mn_(5)phases on the surface of the alloy was significantly higher after the CA pretreatment,and thus promoted the growth of the subsequent Mg-Al-LDH coatings.The CA pretreatment for 30 s resulted in a denser and thicker LDH coating.Increase in the CA pretreatment time significantly led to the improvement in corrosion resistance of the coated AZ80 alloy.The corrosion current density of the coated alloy was lower by three orders of magnitude as compared to the uncoated alloy.
基金funded by the National Key R&D Program of China(2020YFD0900900)。
文摘The quality and flavor of scallops changes during the fresh dry rehydration process.In order to control the changes after rehydration,a scallop pretreatment method was adopted.The pretreatment method involved impregnating fresh scallops with 0.2 g/100 m L konjac glucomannan(KGM),carrageenan(CA),and sodium alginate(SA)before the drying and rehydration process.After rehydration,the KGM treated samples had better water retention and the highest betaine content.The CA treated samples had a deepened yellow color and the highest content of flavoring amino acids(FAA)and inosine monophosphate(IMP).What’s more,a total of 77 volatile compounds were detected,with a maximum of 15 esters.The highest proportion in the four groups was eugenol,followed by n-hexadecanoic acid,methyl hexadecanoate etc.The SA group had no significant contribution in terms of quality and taste.The samples pretreated with KGM had the best quality,and those pretreated by CA had the best flavor.
基金This research was funded by the National Natural Science Foundation of China(No.21978104)the Program for the National Key Research and Development Program of China(No.2021YFC2101601).
文摘Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.
基金supported by the National Natural Science Foundation of China(22078225)the Natural Science Foundation of Zhejiang Province(LGF22E080025 and LHY22E080005)。
文摘The effects of sulfuric acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust were investigated in this study.Sulfuric acid could act as an acidic catalyst to depolymerize holocellulose through cleavage of the glycosidic bonds,the dissociation energies of which were supplied by the impact of a ball on pine sawdust,during milling.The destruction of glycosidic and hydrogen bonds in pine sawdust resulted in a decrease of crystallinity and an increase of water solubility.The sulfuric acid could promote the hydrolysis of holocellulose and its hydrolysis products.It also destroyed the chemical linkages between holocellulose and lignin during ball milling.The cleavage of chemical linkages with holocellulose made lignin more difficult to hydrolyze in subcritical water,and higher activation energy was needed to hydrolyze pretreated pine sawdust at higher reaction temperatures.It also led to the formation of glucose char and aromatic-linked polymer char from the hydrolysis products of holocellulose.
基金financially supported by the National Key Research and Development Program of China (No. 2021YFC2903202)the National Natural Science Foundations of China (Nos. 51974366, 52174267, 52174270 and 52004250)+2 种基金the China Postdoctoral Science Foundation (No. 2020M680100 and 2020TQ0279)the Postdoctoral Research Grant in Henan Province (No. 202003025)the State Key Laboratory of Mineral Processing and Co-innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources。
文摘Selective surface dissolution was found to be important in spodumene flotation. In this study, we proposed to introduce ultrasound into the pretreatment process to accelerate particle vibration and cavitation, as well as the migration of mineral surface components to solution. Micro-flotation results showed that the flotation recovery of spodumene can be 86.08% by ultrasound pretreatment, but only 39.30% by traditional mechanical agitation pretreatment. Compared with traditional mechanical agitation, ultrasonic pretreatment can shorten the pretreatment process, reduce the dosage of agents, reduce the mechanical agitation speed, and improve the efficiency of the pretreating process. Inductively coupled plasma analysis showed that, in the ultrasonic system, the amount of Li, Al, and Si species in the solution was twice as much as those in the traditional preprocessing system. Moreover, the scanning electron microscope results demonstrated a larger surface dissolution area in the ultrasonic system. X-Ray photoelectron spectroscopy results showed that the atomic concentration of Si species on the spodumene surface decreased, whereas the relative atomic concentrations of Li and Al species increased, indicating that the ultrasound effect strengthened the selective dissolution of elements on the mineral surface.The high-resolution spectra of O 1s showed that more collectors are adsorbed on the mineral surface treated by ultrasonic pretreatment.
基金The National Natural Science Foundation of China under contract No.41576074the Natural Science Foundation of Fujian Province of China under contract No.2019J01020.
文摘In the open ocean,radium isotopes are useful tracers of residence time and water-mass mixing.However,limited by the measurement resolution of commonly used gamma counters,the low activity of radium in the open ocean makes it necessary to enrich radium from large volumes of seawater and pretreat radium-enriched carriers prior to measurements.The commonly applied method of radium enrichment and pretreatment,however,has limitations of uneven coating of MnO_(2)on cartridges,relatively expensive cartridges,time-consuming issues during cartridge-ashing,ash loss during transfer,and changes of gamma counters efficiency caused by different ash weights.To address these issues,in this study we optimized the enrichment and pretreatment of low-activity radium prior to measurements.Firstly,we replaced commonly used acrylic cartridges with cheaper polypropylene cartridges,which took 6 h to be ashed,42 h shorter than for acrylic cartridges.Secondly,MnO_(2)-coated cartridges were prepared with a circulating hot acidic KMnO_(4)solution to ensure homogeneous coating.The radium extraction efficiency of this MnO_(2)-coated cartridge was 20%-61%higher than that prepared by directly immersing cartridges in the solution.The radium delayed coincidence counter efficiency for MnO_(2)-coated cartridge was stable with a moisture content of 0.05-1.Lastly,after ashing cartridges,instead of directly transferring the ash to a measurement vial,a mixture of hydroxylamine hydrochloride and hydrochloric acid was used to completely leach the ash for long-lived radium,followed by coprecipitation by BaSO_(4),to avoid potential loss of ash during transfer and variations in measurement geometry due to different ash weights.And the recovery of long-lived radium pretreatment was 94%-102%,which improved by 11%compared with the common method.In addition,the radium extraction efficiency of the MnO_(2)-coated cartridge varied from 3%to 4%within the in situ pump working flow rate of 4-7 L/min,which fell within the measurement errors.
基金Funded by the National Key Research and Development Program of China-Intergovernmental International Cooperation in Scientific and Technological Innovation MOST,China (No.2018YFE0107300)。
文摘Two carbonation approaches are considered for studying the effects on the hardening mechanisms of slurries made of 100 wt%electric arc furnace steel slag (EAF) slag or 80 wt%EAF slag incorporating 20 wt% of Portland cement,which are applied during the hot-stage pretreatment with simulated gas for raw steel slag or the accelerated carbonation curing of slurry.The mechanical strengths,carbonate products,microstructures and CO_(2) uptakes were quantitatively investigated.Results manifest that accelerated carbonation curing increases the compressive strengths of steel slag slurry,from 17.1 MPa (binder of 80 wt% EAF and 20 wt%cement under standard moisture curing) to 36.0 MPa (binder of 80 wt%EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 52%.In contrast,hot-stage carbonation applied during the pretreatment of steel slag increases the compressive strengths to 43.7 MPa (binder of 80 wt%carbonated EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 67%.Hotstage carbonation of steel slag is found for particle agglomeration,minerals remodeling and calcite formed,thus causing an activated steel slag with a dense structure and more active components.Accelerated carbonation curing of steel slag slurry paste results in the newly formed amorphous CaCO_(3),calcite crystalline and silica gels that covered the pores of the matrix,facilitating microstructure densification and strength improvement.Adopting the combinative methods of the hot-stage CO_(2) pretreatment and accelerated carbonation curing creates a promising high-volume steel slag-based binder with high strengths and CO_(2) storage.
基金supported by the Natural Science Fund Program of China (No.52306043)the Science and Technology Project of Jiangsu Province (Nos.BE2022604&BE2021701)+2 种基金the Youth Talent Promotion Project of Jiangsu Provincial Association for Science and Technology (No.JSTJ-2022-046)the Inner Mongolia Major Science and Technology Project (No.2021ZD0022)the State Key Laboratory of High-Efficiency Utilization of Coal and Green Chemical Engineering (China) (Nos.2022-K25&2022-K37).
文摘A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil.The characterization results demonstrated that microbial pretreatment was an effective method to decrease the lignin,which can achieve a maximum removal rate of 44.19%.Due to the destruction of biomass structure,the content of alkali metal and alkaline earth metal is reduced.Meanwhile,the depolymerized biomass structure created better pyrolysis conditions to promote the pyrolysis efficiency,increase the average decomposition rate of pyrolysis and reduce the residue.In fast pyrolysis,because of the enrichment of cellulose and the removal of lignin,the contents of acids,linear carbonyls,furans,and sugars increased while the contents of phenols decreased.As for the catalytic pyrolysis,due to the hydrocarbon pool reaction and shape selection deoxidation of ZSM-5 catalyst,the total hydrocarbon and aromatics contents can significantly increase up to 34.37%and 30.59%,respectively,with 3 weeks of pretreatment.And the the low molecular content of bio-oil increased after pretreatment,which can significantly benefit the entry of primary pyrolysis steam into the catalyst pores to improve the catalytic efficiency and hydrocarbon contents.This method provides a new treatment idea for high-quality utilization of biomass.
基金Supported by the Technological Project of Heilongjiang Province"the Open Competition Mechanism to Select the Best Candidates"(2022ZXJ05C01-03)。
文摘Corn stalk hydrothermal wastewater(CSHW)was used as a pretreatment for whole-slurry anaerobic co-digestion instead of conventional acid pretreatment.CSHW pretreatment was conducted at 20℃,35℃and 50℃for 3,6 and 9 h,after which all experimental groups were digested at 35℃for 24 days.This pretreatment method efficiently broke the lignocellulose structure of the corn stalk.Different from the volatile fatty acids(VFAs)content,the pH and RS contents were relatively higher than those of the control during the pretreatment process.Furthermore,the highest methane production[185.03 mL•g-1 VS(volatile solid)]was achieved at 55.46%under 35℃in 6 h,which was higher than that of the normal corn stalk anaerobic digestion.The VFAs contents and pH increased compared to CK upon the addition of NaOH to adjust pH,and the RS content also increased slightly due to the degradability of lignocellulose during the whole-slurry anaerobic co-digestion.This work provided a potential method to sustainably treat wastewater and improve fermentation performance.
文摘Background: In developed countries, colon cancer is the second most prevalent cancer, only exceeded by prostate cancer in men and breast cancer in women. After Hepatocellular carcinoma, breast cancer, bladder cancer, lung cancer, Non-Hodgkin Lymphoma and brain tumors, colon cancer is the 7<sup>th</sup> most common cancer in Egypt, in both sexes, representing 3.47% and 3%, in both male and female cancers, respectively. Aim of the Work: The aim of this study was to evaluate the prognostic and predictive significance of pretreatment Neutrophil/lymphocytes ratio (NLR), in terms of disease-free survival (DFS) and recurrence, in high-risk stage II and stage III Colorectal cancer patients who underwent curative resection. Patients and Methods: We retrospectively evaluated 103 patients, who were submitted to upfront surgery as first therapeutic option in curative intent, between January 2017 and December 2018. Pretreatment Neutrophil/lymphocytes ratio (NLR), as well as demographics, clinical, histopathologic, and laboratory data were analyzed. Univariate and multivariate analyses were conducted to identify prognostic factors associated with disease free survival (DFS) and recurrence. Results: The cutoff point of Neutrophils/lymphocytes ratio (NLR) was calculated with Kaplan-Meier curves and log-rank test to 3. This study revealed that neutrophils/lymphocytes ratio (NLR) was significantly associated with disease free survival (p as no difference in efficacy between both chemotherapy regimens FOLFOX and XELOX in both high-risk stage II and stage III colon cancer regarding disease free survival & the toxicity profile associated with each regimen and its grades between patients. Conclusion: Our study suggests that preoperative Neutrophils/lymphocytes ratio (NLR) more than 3 may be an independent prognostic marker for TTR (time to recurrence) in high-risk stage II and stage III colon cancer patients.
基金the Chinese postdoctoral fund Natural Science fund of Shandong province No 93E0157 and State Major Besearch project (PD-B6-7-2)
文摘Study on the coagulation of four species of red tide organisms（Nitzschia pungens,Skeletonema costatum,Prorocentrum minimum and Noctiluca scintillans）with montmorillonite,and the effect ofmontmorillonite pretreatment on the coagulation shows that the capability for montmorillonite to coagu-late with them is in the order:N.pungens】S.costatum】P.minimum】N.scintillans.Thecoagulation is discussed from the aspects of the structure,shape,size,movement,habit,etc.of differ-ent species and the results are explained theoretically.The experimental results also indicate that the treat-ment of montmorillonite with acid can enhance its coagulating capability.This is due to the fact that Al（OH<sub>2</sub>）<sub>6</sub><sup>+3</sup>,exchanged from the clay lattice by hydrogen ion H<sup>+</sup>,forms hydroxy-aluminum polymers on thesurface of the montmorillonite.The hydroxy-aluminum polymers positively charge and increase the positivecharacteristic of the clay surface,and also serves as a bridge between adjacent surfaces of particles.Thesetwo functions
基金the National Natural Science Foundation of China(Nos.51734005,51874071,and 51604063)the Fok Ying Tung Education Foundation for Young Teachers in the Higher Education Institutions of China(No.161045)+1 种基金the Liao Ning Revitalization Talents Program(No.XLYC1807111)the Fundamental Research Funds for the Central Universities of China(No.N180105030).
文摘The efficient development and utilization of high-phosphorus oolitic hematite is of great strategic significance for the sustainable supply of iron-ore resources in China.In this paper,the mechanism of high-temperature pretreatment for enhancing the effect of iron enrichment and dephosphorization in the magnetization roasting–leaching process was studied by X-ray diffraction(XRD),vibration sample magnetometer(VSM),scanning electron microscopy and energy dispersive spectrometry(SEM–EDS).Compared with the process without high-temperature pretreatment,the iron grade of the magnetic separation concentrate after high-temperature pretreatment had increased by 0.98%,iron recovery rate had increased by 1.33%,and the phosphorus content in the leached residue had decreased by 0.12%.High-temperature pretreatment resulted in the dehydration and decomposition of hydroxyapatite,the dehydration of limonite and the thermal decomposition of siderite,which can produce pores and cracks and weaken the compactness of the ore,improve the magnetization characteristics of roasted ore,and strengthen the iron enrichment and dephosphorization during the magnetization roasting and leaching process.
基金supported by the National Natural Science Foundation of China(21773307)
文摘Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polymers are not soluble in common solvents, which hinders their pretreatment and conversion. Deep eutectic solvents(DESs) are environmental-friendly, cheap, and highly tunable, with high solubility,which renders them potential applications in biomass pretreatment and conversion. They could be used as solvents or catalysts and so on. This paper intends to review the application of DESs for the pretreatment of biomass and conversion of biomass to value-added products. We focus on the following topics related to biomass and DESs:(1) DESs for the pretreatment of biomass;(2) DESs for the dissolution and separation of biomass or extraction of chemicals from biomass;(3) DESs for biomass conversion;(4) Drawbacks, and recyclability of DESs for pretreatment and conversion of biomass.
基金financially supported by the National Natural Science Foundation of China (Nos. 51374079 and 51504053) the Hundred, Thousand and Ten Thousand Talent Project of Liaoning Province (No. 2014921014)the Postdoctoral Science Foundation of China (No. 2015M571324)
文摘Hydrophobic flocculation pretreatment was performed to assess its effect on the recovery of fine cuprite in sulfidation-flotation. The results of the micro-flotation experiment showed that cuprite recovery is related to the particle size, and that an excessive content of fine particles(<18 μm) impacted the recovery of coarse particles. When hydrophobic flocculation pretreatment was used, the recovery of fine cuprite in sulfidation-flotation increased from 60.3% to 86.3% under optimum conditions(pH 9.5; sodium oleate concentration, 2 × 10^(-4) mol×L^(-1); stirring time, 6 min; stirring speed, 1600 r×min^(-1)). The laser particle size analysis and optical microscopy results indicate that hydrophobic flocculation pretreatment effectively reduces the content of fine cuprite, and augments the apparent particle size in the pulp. We performed the Derjaguin–Landau–Verwey–Overbeek(DLVO) theory and extended DLVO theory calculations to further support the interpretation of the results.
基金the National Key Basic Research Program of China (No. 2014CB238905)
文摘High-alkali species in coal are notorious for causing ash slagging and fouling incidents.In this paper,four high-alkali coals were individually subject to hydrothermal pretreatment(HTP),within a batch-type autoclave at 300 -C for 1 h,and the treated coals were analyzed,along with the oxygen-containing functional groups determined by Fourier transform infrared spectrometer(FT-IR).Then the alkali species and other components in the coal ash were quantified by X-ray fluorescence(XRF)for evaluating the ash slagging and fouling tendency.Apart from this,FactSage was adopted to simulate the occurrence and transformation of alkali species during coal thermal conversion ending at various temperatures.The findings indicate that the treated coals are superior to the parent ones in terms of certain remarkable changes via HTP.The moisture,oxygen and sulfur of the hydrothermally treated coals decline obviously,while the calorific value rises sharply.HTP could reduce the alkali species to less than 2%(%,by weight,equivalent to Na2O in dry ash),with a maximum removal ratio of 88.9%,lowering the ash slagging and fouling tendency.The proposed mechanism of HTP was that the alkali species in coal matrix became released due to the breakage of the coal functional groups and micropores during HTP.
文摘We characterized the effects of KNO3 pretreatment and germination temperature on dormancy breaking and germination of mature mountain ash seeds. Seeds treated with KNO3 and germinated at 25 ℃ followed by 5 ℃ had significantly higher germination percentages and germination potentials (51% and 49%, respectively), compared with controls. These treated seeds also exhibited reduced germination initiation times (minimum of 48 days), and elevated germination rate indices (up to 97). The germination of seeds subjected to long-term cold storage (2 years at 0-5 ℃) was also significantly improved by 3 days of 4% KNO3 pretreatment before germinating under a variable temperature regimen (5 ℃ followed by 25 ℃, and followed by 5 ℃). Germination percentages and germination potentials for these cold-stored seeds reached 67% and 54%, respectively, and the germination rate index increased to 126.99. Pretreatment of mountain ash seeds with KNO3 represents a practical, effective, and pollution-free method for improving germination, and can be implemented easily within a variety of nursery settings.
基金Project(2012BAE06B05)supported by the National Science and Technology Support Program of ChinaProject(N130602004)supported by the Fundamental Research Funds for the Central Universities of China
文摘The application of microwave irradiation for pretreatment of copper anode slime with high nickel content prior to pressure sulfuric acid leaching has been proposed.The microwave-assisted pretreatment is a rapid and efficient process.Through the technology of microwave assisted pretreatment-pressure leaching of copper anode slime,copper,tellurium,selenium and nickel are almost completely recovered.Under optimal conditions,the leaching efficiencies of copper,tellurium,selenium and nickel are 97.12%,95.97%,95.37% and 93.90%,respectively.The effect of microwave radiation on the temperature of copper anode slime and leaching solution is investigated.It is suggested that the enhancement on the recoveries of copper,tellurium and selenium can be attributed to the temperature gradient which is caused by shallow microwave penetration depth and super heating occurring at the solid–liquid interface.The kinetic study shows that the pressure leaching of copper anode slime,with and without microwave assisted pretreatment,are both controlled by chemical reactions on the surfaces of particles.It is found that the activation energy calculated for microwave-assisted pretreatment-pressure leaching(49.47 kJ/mol) is lower than that for pressure leaching which is without microwave assisted pretreatment(60.57 kJ/mol).
