The effect of Ce on the behavior of gas evolution on Pb-Ca-Sn alloy in 4.5 mol·L^-1 H2SO4 was investigated using cyclic voltammetry （CV）, cathodic polarization curves and AC impedance （EIS）. Cyclic voltammetr...The effect of Ce on the behavior of gas evolution on Pb-Ca-Sn alloy in 4.5 mol·L^-1 H2SO4 was investigated using cyclic voltammetry （CV）, cathodic polarization curves and AC impedance （EIS）. Cyclic voltammetry experiments show that the current of oxygen evolution on Pb-Ca-Sn-Ce electrode is lower than that of Pb-Ca-Sn electrode in the same anodic voltage. Moreover, the oxygen evolution potential on the former electrode is greater than that on the latter, and this means that Ce can increase the potential of oxygen evolution on Pb-Ca-Sn alloy. The AC impedance experiments show that Ce can also enhance the resistance of hydrogen evolution on Pb-Ca-Sn electrode, i.e., Ce can inhibit the hydrogen evolution on Pb-Ca-Sn electrode. The reason why Ce decreases the volume of hydrogen evolution on Pb-Ca-Sn alloy is that Ce increases the resistance of absorbing step of hydrogen evolution reaction. All the experimental results indicate that Pb-Ca-Sn-Ce alloy can rapidly decrease the oxygen and hydrogen evolution on Pb-Ca-Sn-Ce alloy. It is concluded that Pb-Ca-Sn-Ce alloy can promote the maintenance-free property of lead acid battery, and can serve as the candidate of the grid material for maintenance-free lead acid battery.展开更多
A Pb-0.08Ca-2Sn alloy was subjected to rolling at room temperature to different final thicknesses.Annealing treatments at temperature ranging from 80 to 120 °C led to recrystallization of the samples as shown by ...A Pb-0.08Ca-2Sn alloy was subjected to rolling at room temperature to different final thicknesses.Annealing treatments at temperature ranging from 80 to 120 °C led to recrystallization of the samples as shown by resistivity and micro-hardness measurements.The deformation texture determined through X-ray diffraction is qualitatively the Brass type.The measured Lankford anisotropy parameter R and its evolution are close to the determined one using a self consistent approach.The R value evolution with angle to rolling direction shows the presence of planar anisotropy and poor drawability.The recrystallization in annealing at 80-120 °C is achieved within time period up to 3×104 s.The recrystallization texture is a retained deformation texture with an emerging Cube component.展开更多
The density,nature of the dislocations and distribution of the domain sizes in cold-deformed Pb-Ca-Sn solid solution were determined by X-ray diffraction profile analysis.The dislocation densities are of the order of ...The density,nature of the dislocations and distribution of the domain sizes in cold-deformed Pb-Ca-Sn solid solution were determined by X-ray diffraction profile analysis.The dislocation densities are of the order of 1010 cm-2.The strain broadening of diffraction profiles was accounted for by dislocation contrast factor.The coherent domain size was determined by the recently developed PM2K software package.Assuming that the domain size distribution is log-normal,the distribution function（median μ and variance σ） was calculated from the size parameters determined from X-ray diffraction profile analysis.展开更多
The anodic films of novel Pb-Ca-Sn-Ce alloy, traditional Pb-Ca-Sn and Pb-Sb alloys formed in sulfuric solution at anodic +0.9 V potential corrosion for 6 h were investigated by means of XPS, XRD methods and AC impedan...The anodic films of novel Pb-Ca-Sn-Ce alloy, traditional Pb-Ca-Sn and Pb-Sb alloys formed in sulfuric solution at anodic +0.9 V potential corrosion for 6 h were investigated by means of XPS, XRD methods and AC impedance measurement. The results show that the growth of Pb(Ⅱ) oxide on the new Pb-Ca-Sn-Ce alloy surface is inhibited. The AC impedance measurement shows that resistance of the corrosion layer of novel Pb-Ca-Sn-Ce alloy decreases. It is found that the novel Pb-Ca-Sn-Ce alloy can encourage the development of PbO2 in the scale, and enhance the conductivity of the anodic scale. Hence the deep recycling properties of the battery can be expected better.展开更多
文摘The effect of Ce on the behavior of gas evolution on Pb-Ca-Sn alloy in 4.5 mol·L^-1 H2SO4 was investigated using cyclic voltammetry （CV）, cathodic polarization curves and AC impedance （EIS）. Cyclic voltammetry experiments show that the current of oxygen evolution on Pb-Ca-Sn-Ce electrode is lower than that of Pb-Ca-Sn electrode in the same anodic voltage. Moreover, the oxygen evolution potential on the former electrode is greater than that on the latter, and this means that Ce can increase the potential of oxygen evolution on Pb-Ca-Sn alloy. The AC impedance experiments show that Ce can also enhance the resistance of hydrogen evolution on Pb-Ca-Sn electrode, i.e., Ce can inhibit the hydrogen evolution on Pb-Ca-Sn electrode. The reason why Ce decreases the volume of hydrogen evolution on Pb-Ca-Sn alloy is that Ce increases the resistance of absorbing step of hydrogen evolution reaction. All the experimental results indicate that Pb-Ca-Sn-Ce alloy can rapidly decrease the oxygen and hydrogen evolution on Pb-Ca-Sn-Ce alloy. It is concluded that Pb-Ca-Sn-Ce alloy can promote the maintenance-free property of lead acid battery, and can serve as the candidate of the grid material for maintenance-free lead acid battery.
文摘A Pb-0.08Ca-2Sn alloy was subjected to rolling at room temperature to different final thicknesses.Annealing treatments at temperature ranging from 80 to 120 °C led to recrystallization of the samples as shown by resistivity and micro-hardness measurements.The deformation texture determined through X-ray diffraction is qualitatively the Brass type.The measured Lankford anisotropy parameter R and its evolution are close to the determined one using a self consistent approach.The R value evolution with angle to rolling direction shows the presence of planar anisotropy and poor drawability.The recrystallization in annealing at 80-120 °C is achieved within time period up to 3×104 s.The recrystallization texture is a retained deformation texture with an emerging Cube component.
文摘The density,nature of the dislocations and distribution of the domain sizes in cold-deformed Pb-Ca-Sn solid solution were determined by X-ray diffraction profile analysis.The dislocation densities are of the order of 1010 cm-2.The strain broadening of diffraction profiles was accounted for by dislocation contrast factor.The coherent domain size was determined by the recently developed PM2K software package.Assuming that the domain size distribution is log-normal,the distribution function（median μ and variance σ） was calculated from the size parameters determined from X-ray diffraction profile analysis.
文摘The anodic films of novel Pb-Ca-Sn-Ce alloy, traditional Pb-Ca-Sn and Pb-Sb alloys formed in sulfuric solution at anodic +0.9 V potential corrosion for 6 h were investigated by means of XPS, XRD methods and AC impedance measurement. The results show that the growth of Pb(Ⅱ) oxide on the new Pb-Ca-Sn-Ce alloy surface is inhibited. The AC impedance measurement shows that resistance of the corrosion layer of novel Pb-Ca-Sn-Ce alloy decreases. It is found that the novel Pb-Ca-Sn-Ce alloy can encourage the development of PbO2 in the scale, and enhance the conductivity of the anodic scale. Hence the deep recycling properties of the battery can be expected better.
