A design and implementation for a 2.4GHz quadrature output frequency synthesizer intended for bluetooth in 0. 35μm CMOS technology are presented. A differentially controlled quadrature voltage-controlled oscillator ...A design and implementation for a 2.4GHz quadrature output frequency synthesizer intended for bluetooth in 0. 35μm CMOS technology are presented. A differentially controlled quadrature voltage-controlled oscillator （QVCO） is employed to generate quadrature （I/Q） signals. A second-order loop filter, with a unit gain transconductance amplifier having the performance of a third-order loop filter,is exploited for low cost. The measured spot phase noise is -106.15dBc/Hz@ 1MHz. Close-in phase noise is less than -70dBc/Hz. The synthesizer consumes 13.5mA under a 3.3V voltage supply. The core size is 1.3mm×0. 8mm.展开更多
A fractional-N frequency synthesizer for 433/868MHz SRD applications is implemented in a 0.3μm CMOS process. A wide-band VCO and an AFC are used to cover the desired bands. A 3bit third order sigma-delta modulator is...A fractional-N frequency synthesizer for 433/868MHz SRD applications is implemented in a 0.3μm CMOS process. A wide-band VCO and an AFC are used to cover the desired bands. A 3bit third order sigma-delta modulator is adopted to reduce the out-band phase noise. The measurements show a VCO tuning range from 1.31 to 1.88GHz with AFC working correctly,an out-band phase noise of -139dBc/Hz at 3MHz offset frequency, and a fractional spur of less than - 60dBc. The chip area is 1.5mm × 1.2mm and the total current dissipation including LO buffers is 19mA from a single 3.0V supply voltage.展开更多
The design procedure of an 1-GHz phase-locked loop （PLL）-based frequency synthesizer used in IEEE 1394b physical （PHY） system is presented in this paper. The PLL＇s loop dynamics are analyzed in depth and theoreti...The design procedure of an 1-GHz phase-locked loop （PLL）-based frequency synthesizer used in IEEE 1394b physical （PHY） system is presented in this paper. The PLL＇s loop dynamics are analyzed in depth and theoretical relationships between all loop parameters are clearly described. All the parameters are derived and verified by Verilog-A model, which ensures the accuracy and efficiency of the circuit design and simulation. A 4-stage ring oscillator is employed to generate 1-GHz oscillation frequency and is divided into low frequency clocks by a feedback divider. The architecture is a third-order, type-2 charge pump PLL. The simulated settling time is less than 4μs. The RMS value of period jitter of the PLL＇s output is 2.1 ps. The PLL core occupies an area of 0.12 mm2, one fourth of which is occupied by the MiM loop capacitors. The total current consumption of the chip is 16.5 mA. The chip has been sent for fabrication in 0.13 μm complementary metal oxide semiconductor （CMOS） technology.展开更多
A fully integrated frequency synthesizer with low jitter and low power consumption in 0.18 μm CMOS (complementary metal-oxide semiconductor) technology is proposed in this paper.The frequency synthesizer uses a novel...A fully integrated frequency synthesizer with low jitter and low power consumption in 0.18 μm CMOS (complementary metal-oxide semiconductor) technology is proposed in this paper.The frequency synthesizer uses a novel single-end gain-boosting charge pump, a differential coupled voltage controlled oscillator (VCO) and a dynamic logic phase/frequency detecor (PFD) to acquire low output jitter.The output frequency range of the frequency synthesizer is up to 1 200 MHz to 1 400 MHz for GPS (global position system) application.The post simulation results show that the phase noise of VCO is only 127.1 dBc/Hz at a 1 MHz offset and the Vp-p jitter of the frequency synthesizer output clock is 13.65 ps.The power consumption of the frequency synthesizer not including the divider is 4.8 mW for 1.8 V supply and it occupies a 0.8 mm×0.7 mm chip area.展开更多
This paper presents a frequency synthesizer architecture based on the time delay digital tanlock loop (TDTL). The loop is of the first order type. The synthesizer architecture includes an adaptation mechanism to keep ...This paper presents a frequency synthesizer architecture based on the time delay digital tanlock loop (TDTL). The loop is of the first order type. The synthesizer architecture includes an adaptation mechanism to keep the complete system in lock. The mechanism uses a frequency sensing structure to control critical TDTL parameters responsible for locking. Both integer and fractional multiples of the loop reference frequency are synthesized by the new architecture. The ability of the TDTL based frequency synthesizer to respond to sudden variations in the system input frequency is studied. The results obtained indicate the proposed synthesizer has a robust performance and is capable of responding to those changes provided that they are within the bounds of its locking region.展开更多
This paper investigates the design of digital Sigma-Delta Modulator (SDM) for fractional-N frequency synthesizer. Characteristics of SDMs are compared through theory analysis and simulation. The curve of maximum-loop-...This paper investigates the design of digital Sigma-Delta Modulator (SDM) for fractional-N frequency synthesizer. Characteristics of SDMs are compared through theory analysis and simulation. The curve of maximum-loop-bandwidth vs. maximum-phase-noise is suggested to be a new criterion to the performance of SDM,which greatly helps designers to select an appropriate SDM structure to meet their real application requirements and to reduce the cost as low as possible. A low-spur 3-order Mul-tistage Noise Shaping (MASH)-1-1-1 SDM using three 2-bit first-order cascaded modulators is proposed,which balances the requirements of tone-free and maximum operation frequency.展开更多
This paper presents a low phase-noise fractional-N frequency synthesizer which provides an inphase/quadrature-phase（I/Q） signal over a frequency range of 220–1100 MHz for wireless networks of industrial automation...This paper presents a low phase-noise fractional-N frequency synthesizer which provides an inphase/quadrature-phase（I/Q） signal over a frequency range of 220–1100 MHz for wireless networks of industrial automation（WIA） applications. Two techniques are proposed to achieve the wide range. First, a 1.4–2.2 GHz ultralow gain voltage-controlled oscillator（VCO） is adopted by using 128 tuning curves. Second, a selectable I/Q divider is employed to divide the VCO frequency by 2 or 3 or 4 or 6. Besides, a phase-switching prescaler is proposed to lower PLL phase noise, a self-calibrated charge pump is used to suppress spur, and a detect-boosting phase frequency detector is adopted to shorten settling time. With a 200 k Hz loop bandwidth, lowest measured phase noise is 106 dBc/Hz at a 10 k Hz offset and 131 dBc/Hz at a 1 MHz offset. Fabricated in the TSMC 0.18 μm CMOS process, the synthesizer occupies a chip area of 1.2 mm^2, consumes only 15 m W from the 1.8 V power supply,and settles within 13.2 s. The synthesizer is optimized for the WIA applications, but can also be used for other short-range wireless communications, such as 433, 868, 916 MHz ISM band applications.展开更多
An integer-N frequency synthesizer for a receiver application at multiple frequencies was implemented in 0.18μm 1P6M CMOS technology. The synthesizer generates 2.57 GHz, 2.52 GHz, 2.4 GHz and 2.25 GHz local signals f...An integer-N frequency synthesizer for a receiver application at multiple frequencies was implemented in 0.18μm 1P6M CMOS technology. The synthesizer generates 2.57 GHz, 2.52 GHz, 2.4 GHz and 2.25 GHz local signals for the receiver. A wide-range voltage-controlled oscillator （VCO） based on a reconfigurable LC tank with a binaryweighted switched capacitor array and a switched inductor array is employed to cover the desired frequencies with a sufficient margin. The measured tuning range of the VCO is from 1.76 to 2.59 GHz. From the carriers of 2.57 GHz, 2.52 GHz, 2.4 GHz and 2.25 GHz, the measured phase noises are -122.13 dBc/Hz, -122.19 dBc/Hz, -121.8 dBc/Hz and -121.05 dBc/Hz, at 1 MHz offset, respectively. Their in-band phase noises are -80.09 dBc/Hz, -80.29 dBc/Hz, -83.05 dBc/Hz and -86.38 dBc/Hz, respectively. The frequency synthesizer including buffers consumes a total power of 70 mW from a 2 V power supply. The chip size is 1.5 × 1 mm2.展开更多
An improved adaptive frequency calibration（AFC） has been employed to implement a fast lock phaselocked loop based frequency synthesizer in a 0.18μm CMOS process.The AFC can work in two modes：the frequency calibrat...An improved adaptive frequency calibration（AFC） has been employed to implement a fast lock phaselocked loop based frequency synthesizer in a 0.18μm CMOS process.The AFC can work in two modes：the frequency calibration mode and the store/load mode.In the frequency calibration mode,a novel frequency-detector is used to reduce the frequency calibration time to 16 us typically.In the store/load mode,the AFC makes the voltage-controlled oscillator（VCO） return to the calibrated frequency in about 1μs by loading the calibration result stored after the frequency calibration.The experimental results show that the VCO tuning frequency range is about 620-920 MHz and the in-band phase noise within the loop bandwidth of 10 kHz is-82 dBc/Hz.The lock time is about 20μs in frequency calibration mode and about 5 us in store/load mode.The synthesizer consumes 12 mA from a single 1.8 V supply voltage when steady.展开更多
A 1.4-2 GHz phase-locked loop （PLL） ∑-△ fraction-N frequency synthesizer with automatic fre- quency control （AFC） for 802.1 lah applications is presented. A class-C voltage control oscillator （VCO） ranging fr...A 1.4-2 GHz phase-locked loop （PLL） ∑-△ fraction-N frequency synthesizer with automatic fre- quency control （AFC） for 802.1 lah applications is presented. A class-C voltage control oscillator （VCO） ranging from 1.4 to 2 GHz is integrated on-chip to save power for the sub-GHz band. A novel AFC algorithm is introduced to maintain the VCO oscillation at the start-up and automatically search for the appropriate control word of the switched-capacitor array to extend the PLL tuning range. A 20-bit third-order ∑-△ modulator is utilized to reduce the fraction spurs while achieving a frequency resolution that is lower than 30 Hz. The measurement results show that the frequency synthesizer has achieved a phase noise of 〈 -120 dBc/Hz at 1 MHz offset and consumes 11.1 mW from a 1.7 V supply. Moreover, compared with the traditional class-A counterparts, the phase noise in class-C mode has been improved by 5 dB under the same power consumption.展开更多
A fast-hopping 3-band （mode 1） multi-band orthogonal frequency division multiplexing ultra-wideband frequency synthesizer is presented. This synthesizer uses two phase-locked loops for generating steady frequencies ...A fast-hopping 3-band （mode 1） multi-band orthogonal frequency division multiplexing ultra-wideband frequency synthesizer is presented. This synthesizer uses two phase-locked loops for generating steady frequencies and one quadrature single-sideband mixer for frequency shifting and quadrature frequency generation. The generated carriers can hop among 3432 MHz, 3960 MHz, and 4488 MHz. Implemented in a 0.13 μm CMOS process, this fully integrated synthesizer consumes 27 mA current from a 1.2 V supply. Measurement shows that the out-of-band spurious tones are below -50 dBc, while the in-band spurious tones are below -34 dBc. The measured hopping time is below 2 ns. The core die area is 1.0 ×1.8 mm^2.展开更多
A low power low phase noise frequency synthesizer with subharmonic injection locking is proposed for ZigBee applications. The PLL is based on a ring VCO to decrease area and production cost. In order to improve phase ...A low power low phase noise frequency synthesizer with subharmonic injection locking is proposed for ZigBee applications. The PLL is based on a ring VCO to decrease area and production cost. In order to improve phase noise performance, a high frequency injection signal of which frequency varies with channel number is used. The circuit is designed in TSMC 0.18 μm CMOS technology and simulated in ADS (Advanced Design System). The phase noise at 3.5 and 10 MHz offsets is -116 and -118 dBc/Hz, respectively, and total circuit consumes 2.2 mA current.展开更多
A 0.8–4.2 GHz monolithic all-digital PLL based frequency synthesizer for wireless communications is successfully realized by the 130 nm CMOS process. A series of novel methods are proposed in this paper.Two band DCOs...A 0.8–4.2 GHz monolithic all-digital PLL based frequency synthesizer for wireless communications is successfully realized by the 130 nm CMOS process. A series of novel methods are proposed in this paper.Two band DCOs with high frequency resolution are utilized to cover the frequency band of interest, which is as wide as 2.5 to 5 GHz. An overflow counter is proposed to prevent the ＂pulse-swallowing＂ phenomenon so as to significantly reduce the locking time. A NTW-clamp digital module is also proposed to prevent the overflow of the loop control word. A modified programmable divider is presented to prevent the failure operation at the boundary.The measurement results show that the output frequency range of this frequency synthesizer is 0.8–4.2 GHz. The locking time achieves a reduction of 84% at 2.68 GHz. The best in-band and out-band phase noise performances have reached –100 d Bc/Hz, and –125 d Bc/Hz respectively. The lowest reference spur is –58 d Bc.展开更多
文摘A design and implementation for a 2.4GHz quadrature output frequency synthesizer intended for bluetooth in 0. 35μm CMOS technology are presented. A differentially controlled quadrature voltage-controlled oscillator （QVCO） is employed to generate quadrature （I/Q） signals. A second-order loop filter, with a unit gain transconductance amplifier having the performance of a third-order loop filter,is exploited for low cost. The measured spot phase noise is -106.15dBc/Hz@ 1MHz. Close-in phase noise is less than -70dBc/Hz. The synthesizer consumes 13.5mA under a 3.3V voltage supply. The core size is 1.3mm×0. 8mm.
文摘A fractional-N frequency synthesizer for 433/868MHz SRD applications is implemented in a 0.3μm CMOS process. A wide-band VCO and an AFC are used to cover the desired bands. A 3bit third order sigma-delta modulator is adopted to reduce the out-band phase noise. The measurements show a VCO tuning range from 1.31 to 1.88GHz with AFC working correctly,an out-band phase noise of -139dBc/Hz at 3MHz offset frequency, and a fractional spur of less than - 60dBc. The chip area is 1.5mm × 1.2mm and the total current dissipation including LO buffers is 19mA from a single 3.0V supply voltage.
基金supported by the National Natural Science Foundation of China under Grant No. 61006027the New Century Excellent Talents Program of China under Grant No. NCET-10-0297
文摘The design procedure of an 1-GHz phase-locked loop （PLL）-based frequency synthesizer used in IEEE 1394b physical （PHY） system is presented in this paper. The PLL＇s loop dynamics are analyzed in depth and theoretical relationships between all loop parameters are clearly described. All the parameters are derived and verified by Verilog-A model, which ensures the accuracy and efficiency of the circuit design and simulation. A 4-stage ring oscillator is employed to generate 1-GHz oscillation frequency and is divided into low frequency clocks by a feedback divider. The architecture is a third-order, type-2 charge pump PLL. The simulated settling time is less than 4μs. The RMS value of period jitter of the PLL＇s output is 2.1 ps. The PLL core occupies an area of 0.12 mm2, one fourth of which is occupied by the MiM loop capacitors. The total current consumption of the chip is 16.5 mA. The chip has been sent for fabrication in 0.13 μm complementary metal oxide semiconductor （CMOS） technology.
基金Funded by the Communication System Project of Jiangsu Provincial Education Committee under grant No.JHB04010
文摘A fully integrated frequency synthesizer with low jitter and low power consumption in 0.18 μm CMOS (complementary metal-oxide semiconductor) technology is proposed in this paper.The frequency synthesizer uses a novel single-end gain-boosting charge pump, a differential coupled voltage controlled oscillator (VCO) and a dynamic logic phase/frequency detecor (PFD) to acquire low output jitter.The output frequency range of the frequency synthesizer is up to 1 200 MHz to 1 400 MHz for GPS (global position system) application.The post simulation results show that the phase noise of VCO is only 127.1 dBc/Hz at a 1 MHz offset and the Vp-p jitter of the frequency synthesizer output clock is 13.65 ps.The power consumption of the frequency synthesizer not including the divider is 4.8 mW for 1.8 V supply and it occupies a 0.8 mm×0.7 mm chip area.
文摘This paper presents a frequency synthesizer architecture based on the time delay digital tanlock loop (TDTL). The loop is of the first order type. The synthesizer architecture includes an adaptation mechanism to keep the complete system in lock. The mechanism uses a frequency sensing structure to control critical TDTL parameters responsible for locking. Both integer and fractional multiples of the loop reference frequency are synthesized by the new architecture. The ability of the TDTL based frequency synthesizer to respond to sudden variations in the system input frequency is studied. The results obtained indicate the proposed synthesizer has a robust performance and is capable of responding to those changes provided that they are within the bounds of its locking region.
基金the National Natural Science Foundation of China (No. 60025101, No.90207001, and No. 90307016).
文摘This paper investigates the design of digital Sigma-Delta Modulator (SDM) for fractional-N frequency synthesizer. Characteristics of SDMs are compared through theory analysis and simulation. The curve of maximum-loop-bandwidth vs. maximum-phase-noise is suggested to be a new criterion to the performance of SDM,which greatly helps designers to select an appropriate SDM structure to meet their real application requirements and to reduce the cost as low as possible. A low-spur 3-order Mul-tistage Noise Shaping (MASH)-1-1-1 SDM using three 2-bit first-order cascaded modulators is proposed,which balances the requirements of tone-free and maximum operation frequency.
基金supported by the National High Technology Research and Development Program of China(No.2011AA040102)
文摘This paper presents a low phase-noise fractional-N frequency synthesizer which provides an inphase/quadrature-phase（I/Q） signal over a frequency range of 220–1100 MHz for wireless networks of industrial automation（WIA） applications. Two techniques are proposed to achieve the wide range. First, a 1.4–2.2 GHz ultralow gain voltage-controlled oscillator（VCO） is adopted by using 128 tuning curves. Second, a selectable I/Q divider is employed to divide the VCO frequency by 2 or 3 or 4 or 6. Besides, a phase-switching prescaler is proposed to lower PLL phase noise, a self-calibrated charge pump is used to suppress spur, and a detect-boosting phase frequency detector is adopted to shorten settling time. With a 200 k Hz loop bandwidth, lowest measured phase noise is 106 dBc/Hz at a 10 k Hz offset and 131 dBc/Hz at a 1 MHz offset. Fabricated in the TSMC 0.18 μm CMOS process, the synthesizer occupies a chip area of 1.2 mm^2, consumes only 15 m W from the 1.8 V power supply,and settles within 13.2 s. The synthesizer is optimized for the WIA applications, but can also be used for other short-range wireless communications, such as 433, 868, 916 MHz ISM band applications.
文摘An integer-N frequency synthesizer for a receiver application at multiple frequencies was implemented in 0.18μm 1P6M CMOS technology. The synthesizer generates 2.57 GHz, 2.52 GHz, 2.4 GHz and 2.25 GHz local signals for the receiver. A wide-range voltage-controlled oscillator （VCO） based on a reconfigurable LC tank with a binaryweighted switched capacitor array and a switched inductor array is employed to cover the desired frequencies with a sufficient margin. The measured tuning range of the VCO is from 1.76 to 2.59 GHz. From the carriers of 2.57 GHz, 2.52 GHz, 2.4 GHz and 2.25 GHz, the measured phase noises are -122.13 dBc/Hz, -122.19 dBc/Hz, -121.8 dBc/Hz and -121.05 dBc/Hz, at 1 MHz offset, respectively. Their in-band phase noises are -80.09 dBc/Hz, -80.29 dBc/Hz, -83.05 dBc/Hz and -86.38 dBc/Hz, respectively. The frequency synthesizer including buffers consumes a total power of 70 mW from a 2 V power supply. The chip size is 1.5 × 1 mm2.
基金Project supported by the National High Technology Research and Development Program of China(No.2007AA01Z2a8).
文摘An improved adaptive frequency calibration（AFC） has been employed to implement a fast lock phaselocked loop based frequency synthesizer in a 0.18μm CMOS process.The AFC can work in two modes：the frequency calibration mode and the store/load mode.In the frequency calibration mode,a novel frequency-detector is used to reduce the frequency calibration time to 16 us typically.In the store/load mode,the AFC makes the voltage-controlled oscillator（VCO） return to the calibrated frequency in about 1μs by loading the calibration result stored after the frequency calibration.The experimental results show that the VCO tuning frequency range is about 620-920 MHz and the in-band phase noise within the loop bandwidth of 10 kHz is-82 dBc/Hz.The lock time is about 20μs in frequency calibration mode and about 5 us in store/load mode.The synthesizer consumes 12 mA from a single 1.8 V supply voltage when steady.
文摘A 1.4-2 GHz phase-locked loop （PLL） ∑-△ fraction-N frequency synthesizer with automatic fre- quency control （AFC） for 802.1 lah applications is presented. A class-C voltage control oscillator （VCO） ranging from 1.4 to 2 GHz is integrated on-chip to save power for the sub-GHz band. A novel AFC algorithm is introduced to maintain the VCO oscillation at the start-up and automatically search for the appropriate control word of the switched-capacitor array to extend the PLL tuning range. A 20-bit third-order ∑-△ modulator is utilized to reduce the fraction spurs while achieving a frequency resolution that is lower than 30 Hz. The measurement results show that the frequency synthesizer has achieved a phase noise of 〈 -120 dBc/Hz at 1 MHz offset and consumes 11.1 mW from a 1.7 V supply. Moreover, compared with the traditional class-A counterparts, the phase noise in class-C mode has been improved by 5 dB under the same power consumption.
基金Project supported by the National Natural Science Foundation of China(No.60606009)
文摘A fast-hopping 3-band （mode 1） multi-band orthogonal frequency division multiplexing ultra-wideband frequency synthesizer is presented. This synthesizer uses two phase-locked loops for generating steady frequencies and one quadrature single-sideband mixer for frequency shifting and quadrature frequency generation. The generated carriers can hop among 3432 MHz, 3960 MHz, and 4488 MHz. Implemented in a 0.13 μm CMOS process, this fully integrated synthesizer consumes 27 mA current from a 1.2 V supply. Measurement shows that the out-of-band spurious tones are below -50 dBc, while the in-band spurious tones are below -34 dBc. The measured hopping time is below 2 ns. The core die area is 1.0 ×1.8 mm^2.
文摘A low power low phase noise frequency synthesizer with subharmonic injection locking is proposed for ZigBee applications. The PLL is based on a ring VCO to decrease area and production cost. In order to improve phase noise performance, a high frequency injection signal of which frequency varies with channel number is used. The circuit is designed in TSMC 0.18 μm CMOS technology and simulated in ADS (Advanced Design System). The phase noise at 3.5 and 10 MHz offsets is -116 and -118 dBc/Hz, respectively, and total circuit consumes 2.2 mA current.
基金Project supported by the National Natural Science Foundation of China(No.61176029)the National Twelve-Five Project(No.513***)
文摘A 0.8–4.2 GHz monolithic all-digital PLL based frequency synthesizer for wireless communications is successfully realized by the 130 nm CMOS process. A series of novel methods are proposed in this paper.Two band DCOs with high frequency resolution are utilized to cover the frequency band of interest, which is as wide as 2.5 to 5 GHz. An overflow counter is proposed to prevent the ＂pulse-swallowing＂ phenomenon so as to significantly reduce the locking time. A NTW-clamp digital module is also proposed to prevent the overflow of the loop control word. A modified programmable divider is presented to prevent the failure operation at the boundary.The measurement results show that the output frequency range of this frequency synthesizer is 0.8–4.2 GHz. The locking time achieves a reduction of 84% at 2.68 GHz. The best in-band and out-band phase noise performances have reached –100 d Bc/Hz, and –125 d Bc/Hz respectively. The lowest reference spur is –58 d Bc.
