Energy access is vital to a nation’s economic growth and its populace’s social well-being. Still, there is a lack of adequate energy in Nigeria, negatively affecting the country’s socio-economic development. Due to...Energy access is vital to a nation’s economic growth and its populace’s social well-being. Still, there is a lack of adequate energy in Nigeria, negatively affecting the country’s socio-economic development. Due to the inadequate energy supply, some manufacturing companies shut their operations, and most Nigerians now use backup generators (BUGs) with their attendant health hazards, environmental pollution, and global warming. The need for energy access and a sustainable energy supply through renewable energy (RE) resources necessitates adopting solar photovoltaics (PV) in Nigeria. Studies on Nigeria’s energy accessibility and sustainability are generally on RE development and a few on solar PV applications. This research covers the need for an in-depth analysis of the growth of solar PV in Nigeria, and the research question is: What factors promote or limit the adoption of solar photovoltaics in Nigeria? A method of Systematic Literature Review (SLR) and Thematic Analysis (TA) is employed for the analysis. The research findings are divided into drivers, barriers, and policies. Some identified factors promoting the adoption of solar PV are energy poverty and the urgency to improve electricity supply, the ease of its operation and maintenance, and the Nigerian government’s commitment to clean electricity supply with policy initiatives and increased awareness of solar PV applications. Conversely, some noticed factors mitigating the growth of solar PV are poor tariff systems, dual subsidies of electricity and petroleum, and lack of finance and economic incentives.展开更多
Converting solar energy into electric power or hydrogen fuel is a promising means to obtain renewable green energy.Here, we design a two-dimensional blue phosphorene(BlueP)/MoSi2N4van der Waals heterostructure(vdWH) a...Converting solar energy into electric power or hydrogen fuel is a promising means to obtain renewable green energy.Here, we design a two-dimensional blue phosphorene(BlueP)/MoSi2N4van der Waals heterostructure(vdWH) and investigate its potential application in photocatalysis and photovoltaics using first-principles calculations. We find that the BlueP/MoSi2N4vdWH possesses type-Ⅱ band structure with a large build-in electric field, thus endowing it with a potential ability to separate photogenerated electron–hole pairs. The calculated band-edge positions show that the heterostructure is a very promising water-splitting photocatalyst. Its solar-to-hydrogen efficiency(ηSTH) can reach up to 15.8%, which is quite promising for commercial applications. Furthermore, the BlueP/MoSi2N4vdWH shows remarkably light absorption capacity and distinguished maximum power conversion efficiency(ηPCE) up to 10.61%. Remarkably, its ηPCEcan be further enhanced by the external strain: the ηPCEof 21.20% can be obtained under a 4% tensile strain. Finally, we determine that adjusting the number of the BlueP sublayer is another effective method to modulate the band gaps and band alignments of the heterostructures. These theoretical findings indicate that BlueP/MoSi2N4vd WH is a promising candidate for photocatalyst and photovoltaic device.展开更多
The analysis of the loss of distributed photovoltaic power generation systems involves the interests of energy users,energy-saving service companies,and power grid companies,so it has always been the focus of the indu...The analysis of the loss of distributed photovoltaic power generation systems involves the interests of energy users,energy-saving service companies,and power grid companies,so it has always been the focus of the industry and society in some manner or another.However,the related analysis for an actual case that considers different cooperative corporations’benefits is lacking in the presently available literature.This paper takes the distributed rooftop photovoltaic power generation project in an industrial park as the object,studies the analysis and calculation methods of line loss and transformer loss,analyzes the change of transformer loss under different temperatures and different load rates,and compares the data and trend of electricity consumption and power generation in industrial parks before and after the photovoltaic operation.This paper explores and practices the analysis method of the operating loss of distributed photovoltaic power generation and provides an essential reference for the benefit analysis and investment cost estimation of distributed photovoltaic power generation systems in industrial parks.The analyzed results reveal that the change loss is stable after the photovoltaic is connected,and there is no additional transformer loss.And before and after the photovoltaic system installation,there was no significant change in the total monthly data difference between the total meter and the sub-meter.展开更多
Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of pero...Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.展开更多
Small molecule organic photovoltaics(SMPVs) were prepared by utilizing liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4 F and Y6.The BTPBO-4 F and Y6 h...Small molecule organic photovoltaics(SMPVs) were prepared by utilizing liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4 F and Y6.The BTPBO-4 F and Y6 have the similar optical bandgap and different absorption coefficients.The corresponding binary SMPVs exhibit different short circuit current density(/sc)(20.38 vs.23.24 mA cm^(-2)),and fill factor(FF)(70.77% vs.67.21%).A 14.46% power conversion efficiency(PCE) is acquired in ternary SMPVs with 30 wt% Y6,companied with a JSC of 24.17 mA cm^(-2) a FF of 68.78% and an open circuit voltage(Voc) of 0.87 V.The improvement on PCE of ternary SMPVs should originate from the well trade-off between phase separation and photon harvesting of ternary active layers by incorporating 30 wt% Y6 in acceptors.This work may deliver insight onto the improved performance of SMPVs by superposing the superiorities of binary SMPVs with similar optical bandgap acceptors into one ternary cell.展开更多
A building integrated photovoltaic (PV) and fuel cell (FC) system is proposed for assessment of the energy self-sufficiency rate in a city in Japan. The electricity consumed in the building is mainly supplied by solar...A building integrated photovoltaic (PV) and fuel cell (FC) system is proposed for assessment of the energy self-sufficiency rate in a city in Japan. The electricity consumed in the building is mainly supplied by solar panels, while the gap between the energy demand and supply is solved by the FC that is powered by the H2 produced by water electrolysis with surplus power of PV. A desktop case study of using the proposed system in Tsu city which is located in central part of Japan, has been conducted. The results found that the self-sufficiency rates of PV system to electricity demand of households (RPV) during the daytime in April and July are higher than those in January and October. The results also reveal that the self-sufficiency rate of FC system to the electricity demand (RFC) is 15% - 38% for the day when the mean amount of horizontal solar radiation is obtained in January, April, July and October. In addition, it is found the optimum tilt angle of solar panel installed on the roof of the buildings should be 0 degree, i.e., placed horizontally.展开更多
Organic photovoltaic devices are on the verge of commercialization with power conversion efficiencies exceeding 10 % in laboratory cells and above 8.5 % in modules. However, one of the main limitations hindering their...Organic photovoltaic devices are on the verge of commercialization with power conversion efficiencies exceeding 10 % in laboratory cells and above 8.5 % in modules. However, one of the main limitations hindering their mass scale production is the debatable inferior stability of organic photovoltaic devices in comparison to other technologies.Adequate donor/acceptor morphology of the active layer is required to provide carrier separation and transport to the electrodes. Unfortunately, the beneficial morphology for device performance is usually a kinetically frozen state which has not reached thermodynamic equilibrium. During the last 5 years, special efforts have been dedicated to isolate the effects related to morphology changes taking place within the active layer and compare to those affecting the interfaces with the external electrodes. The current review discusses some of the factors affecting the donor/acceptor morphology evolution as one of the major intrinsic degradation pathways. Special attention is paid to factors in the nano- and microscale domain.For example, phase segregation of the polymer and fullerene domains due to Ostwald ripening is a major factor in the microscale domain and is affected by the presence of additives, glass transition temperature of the polymers or use of crosslinkers in the active layer. Alternatively, the role of vertical segregation profile toward the external electrodes is key for device operation, being a clear case of nanoscale morphology evolution. For example, donor and acceptor molecules actually present at the external interfaces will determine the leakage current of the device, energy-level alignment, and interfacial recombination processes. Different techniques have been developed over the last few years to understand its relationship with the device efficiency. Of special interest are those techniques which enable in situ analysis being nondestructive as they can be used to study accelerated degradation experiments and some will be discussed here.展开更多
Solution processible photovoltaics(PV)are poised to play an important role in scalable manufacturing of low-cost solar cells.Electrospray is uniquely suited for fabricating PVs due to its several desirable characteris...Solution processible photovoltaics(PV)are poised to play an important role in scalable manufacturing of low-cost solar cells.Electrospray is uniquely suited for fabricating PVs due to its several desirable characteristics of an ideal manufacturing process such as compatibility with roll-to-roll production processes,tunability and uniformity of droplet size,capability of operating at atmospheric pressure,and negligible material waste and nano structures.This review begins with an introduction of the fundamentals and unique properties of electrospray.We put emphasis on the evaporation time and residence time that jointly affect the deposition outcome.Then we review the efforts of electrospray printing polymer solar cells,perovskite solar cells,and dye sensitized solar cells.Collectively,these results demonstrate the advantages of electrospray for solution processed PV.Electrospray has also exhibited the capability of producing uniform films as well as nanostructured and even multiscale films.So far,the electrospray has been found to improve active layer morphology,and create devices with efficiencies comparable with that of spin-coating.Finally,we discuss challenges and research opportunities that enable electrospray to become a mainstream technique for industrial scale production.展开更多
Two-dimensional(2D) layered organic-inorganic hybrid perovskites have attracted much more attention for some applications than their three-dimensional(3D) perovskite counterparts due to their promising thermal and moi...Two-dimensional(2D) layered organic-inorganic hybrid perovskites have attracted much more attention for some applications than their three-dimensional(3D) perovskite counterparts due to their promising thermal and moisture stabilities.In particular, the 2D perovskite devices have shown better promise for optoelectronic applications.However, tunability of optoelectronic properties is often demanded to improve the device performance.Herein, we adopt a newly method to tune the electronic properties of 2D perovskite by introducing pseudohalide into the structure.In this work, we designed a pseudohalidesubstituted 2D perovskite by substituting the out-of-plane halide with pseudohalide and studied the electronic and excitonic properties of 2D-BA2MX4 and 2D-BA2MX2Ps2(M=Ge^(2+), Sn^(2+), and Pb^(2+);X=I;Ps=NCO, NCS, OCN, SCN, Se CN).We revealed the dependence of electronic properties including band gaps, composition of band edges, bonding characteristics, work functions, effective masses, and exciton binding energies on different pseudohalides substituted in 2D perovskite.Our results indicate that the substitution of pseudohalide in 2D perovskites is energetically favorable and can significantly affect the bonding characteristics as well as the CBM and VBM that often play major role in determining their performance in optoelectronic devices.It is expected that the pseudohalide substitution will be helpful in developing more advanced optoelectronic device based on 2D perovskite by optimizing band alignment and promoting charge extraction.展开更多
Organic photovoltaics(OPVs)suitable for application in indoor lighting environments can power a wide range of internet of things(Io T)related electronic devices.The ternary structure has huge advantages in improving t...Organic photovoltaics(OPVs)suitable for application in indoor lighting environments can power a wide range of internet of things(Io T)related electronic devices.The ternary structure has huge advantages in improving the photovoltaic performance of OPVs,including broadening the light absorption,improving the charge transport,manipulating the energy loss(E_(loss))and so on.Herein,we use wide-bandgap photo-active materials,including the benzotriazole-based polymer donor(J52-F),chlorinated polymer donor(PM7)and A_(2)-A_1-D-A_1-A_(2)-structured acceptor(BTA3),to construct ternary OPVs for indoor light applications.Benefitting from the introduction of PM7 as the third component in J52-F:BTA3-based blend,a gratifying PCE of 20.04%with a high V_(OC)of 1.00 V can be obtained under the test conditions with an illumination of 300 lx from an LED lighting source with a color temperature of 3000 K.The excellent device performance is inseparable from the matched spectrum,enhanced light absorption and the reduced E_(loss),while the improved charge transport capability and suppression of carrier recombination also play an indelible role.Our work shows a potential material system to meet the requirement of devices applied under indoor light.Moreover,these findings demonstrate that designing multi-component OPVs is indeed a feasible way to further improve the performances of the photovoltaic energy conversion system for indoor applications.展开更多
Balancing charge generation and low energy loss(E_(loss)), especially in the wide spectral absorption region is critical to obtain high-performance organic photovoltaics(OPVs). Therefore, Y11-M and Y11-EB are designed...Balancing charge generation and low energy loss(E_(loss)), especially in the wide spectral absorption region is critical to obtain high-performance organic photovoltaics(OPVs). Therefore, Y11-M and Y11-EB are designed and synthesized through modifying alkyl chains on different nitrogen aromatic rings of the reported non-fullerene acceptor Y11. Although all the molecules have almost similar low band-gap(around 1.30 e V), Y11-M and Y11-EB exhibit wider absorption in 410–870 nm region. Eventually, the conventional devices based on Y11-M and Y11-EB possess more efficient charge generation with low Eloss(around 0.44 e V). In addition, outstanding efficiencies of 16.64% and 17.15% with the fill factor of 76.15% and 74.73% are obtained in PM6:Y11-M and PM6:Y11-EB-based devices, both higher than Y11:PM6. The results highlight the importance of rational alkyl chains optimization, and a good structureproperty relationship is established as well.展开更多
Pb-Sn mixed perovskites are becoming increasingly popular as narrowbandgap(1.2–1.3 eV)light absorbers in single-junction perovskite solar cells(PSCs)and as bottom cells for all-perovskite tandem solar cells,for highe...Pb-Sn mixed perovskites are becoming increasingly popular as narrowbandgap(1.2–1.3 eV)light absorbers in single-junction perovskite solar cells(PSCs)and as bottom cells for all-perovskite tandem solar cells,for highefficiency,low-cost,lightweight,roll-to-roll printable photovoltaic(PV)applications.From the first report of planar Pb:Sn mixed PSCs in 2014,the power conversion efficiencies(PCE)have increased from 10%to 21%by the end of 2020 with an exponential growth in research conducted in this field.Despite much effort,the performance and stability of Pb-Sn mixed PSCs are still limited,which constrains their long-term use in all-perovskite tandem devices.This review highlights the avenues explored in improving different aspects of Pb-Sn mixed PSCs and provides a comprehensive discussion of the interdependent factors affecting the device performance.This includes compositional engineering of the perovskite crystal,absorber layer fabrication and crystallization methods,bandgap tuning,Sn4+reduction,and surface passivation of the absorber layer,as well as the selection of interlayers and electrodes of the final PSC.展开更多
A building integrated energy system (photovoltaic (PV) and fuel cell (FC)) is proposed for assessment of the energy self-sufficiency rate in five cities of Mie prefecture in Japan. In this work, it is considered that ...A building integrated energy system (photovoltaic (PV) and fuel cell (FC)) is proposed for assessment of the energy self-sufficiency rate in five cities of Mie prefecture in Japan. In this work, it is considered that the electricity requirement of the building is provided by the building integrated photovoltaic (BIPV) system and the gap between the energy demand and BIPV supply is fulfilled by the FC. The FC is powered by the electrolytic H2 produced from the surplus power of PV. A design study of using the proposed system in five cities in Mie prefecture, which are in center part of Japan, has been performed. It has been observed that the monthly power production from BIPV is higher in spring and summer, while it is lower in autumn and winter at all considered locations. The self-sufficiency rate of the FC system is higher with decreasing households’ number and it has been observed that the 12 households are more suitable for full cover of the electricity demand by the combined system of PV and FC. The relationship between the households’ number and self-sufficiency rate of the FC system per solar PV installation area can be expressed by exponential curve. The coefficient of the exponential curve can predict the suitable city for the BIPV system with FC system utilizing electrolytic H2 generated by using excess energy from the PV system.展开更多
Photovoltaics(PV-also called solar photovoltaic devices)are used to harness the power of the sun via the electronic process that occurs within semiconductor cells.The solar energy is absorbed by the cells,which causes...Photovoltaics(PV-also called solar photovoltaic devices)are used to harness the power of the sun via the electronic process that occurs within semiconductor cells.The solar energy is absorbed by the cells,which causes the electrons to break away from their atoms,allowing them to flow within the material to produce electricity.This electricity will become the renewable energy for Kentucky,as the generation of coal will but come to a stop within the near future.Like Denmark who is running on 100%renewable generation we must stride to become fully operational on solar.In the present work,we systematically studied about renewable energy resources,in particular,solar energy for the application of photovoltaic panels in Eastern Kentucky.By analyzing data from our PV cells at Morehead State University designed to follow the direction of the sun for optimized output and by incorporating MPPT charge controllers,we have constructed a maximum power algorithm that performs best for the location.Utilizing these,measurements of daily electricity production in comparison to the average power needed for household use has validated our research.With the advancements in solar cell technology what was once impossible is now reality,as solar power can easily power this region based on our data.Knowing this,being a prime location we can now push to enable the advancement of renewable energy production and become less dependent on fossil fuels,thus creating an infrastructure that will run off solar power.展开更多
Photovoltaics(PV)can convert sunlight into electricity by making use of the photovoltaic effect.Solar panels consist of photovoltaic cells made of semiconductor materials(such as silicon)to utilise the photovoltaic ef...Photovoltaics(PV)can convert sunlight into electricity by making use of the photovoltaic effect.Solar panels consist of photovoltaic cells made of semiconductor materials(such as silicon)to utilise the photovoltaic effect and convert sunlight into direct current(DC)electricity.Nowadays,PV has become the cheapest electrical power source with low price bids and low panel prices.The competitiveness makes it a potential path to mitigate the global warming.In this paper,we investigate the relationship of PC array output with irradiance and temperature,the performance of PV array over 24 hours period,and the simulation of PV micro grid by MATLAB simulation.展开更多
For cases in which a robot with installed solar cells and a sensor operates in a nuclear reactor building or in space for extravehicular activity, we require elastic and extensible solar cells. More than two different...For cases in which a robot with installed solar cells and a sensor operates in a nuclear reactor building or in space for extravehicular activity, we require elastic and extensible solar cells. More than two different types of sensing are also required, minimally with photovoltaics and built-in electricity. Magnetic compound fluid (MCF) rubber solar cells are made of rubber, so they are elastic and extensible as well as sensitive. To achieve flexibility and an effective photovoltaic effect, MCF rubber solar cells must include both soluble and insoluble rubbers, Fe<sub>3</sub>O<sub>4</sub>, TiO<sub>2</sub>, Na<sub>2</sub>WO<sub>4</sub>∙2H<sub>2</sub>O, etc. On the basis of this constitution, we propose a consummate fabrication process for MCF rubber solar cells. The characteristics of these cells result from the semiconductor-like role of the molecules of TiO<sub>2</sub>, Fe<sub>3</sub>O<sub>4</sub>, Ni, Na<sub>2</sub>WO<sub>4</sub>∙2H<sub>2</sub>O, polydimethylsiloxane (PDMS), natural rubber (NR), oleic acid, polyvinyl alcohol (PVA), water and magnetic cluster involved in the MCF rubber. Their tendencies can be deduced by synthesizing knowledge about the enhancement of the reverse-bias saturation current <em>I</em><sub><em>S</em></sub> and the diode ideality factor <em>N</em>, with conventional knowledge about the semiconductor affected by <em>γ</em>-irradiation and the attenuation of the photon energy of <em>γ</em>-rays.展开更多
We investigate slanted silicon nanocone hole arrays as light absorbing structures for solar photovoltaics via simulation.With only 1-μm equivalent thickness, a maximum short-circuit current density of 34.9 m A/cm^2 i...We investigate slanted silicon nanocone hole arrays as light absorbing structures for solar photovoltaics via simulation.With only 1-μm equivalent thickness, a maximum short-circuit current density of 34.9 m A/cm^2 is obtained. Moreover, by adding an Ag mirror under the whole structure, a short-circuit current density of 37.9 m A/cm^2 is attained. It is understood that the optical absorption enhancement mainly results from three aspects. First, the silicon nanocone holes provide a highly efficient antireflection effect. Second, after breaking the geometric symmetry, the slanted silicon nanocone hole supports more resonant absorption modes than vertical structures. Third, the Fabry–Perot resonance enhances the light absorption after adding an Ag mirror.展开更多
The cost-effective organic semiconductors are strongly needed in organic photovoltaics(OPVs). Herein,two medium bandgap(MBG) electron acceptors, TPT4F and TPT4Cl are developed via the new design of multi-noncovalent i...The cost-effective organic semiconductors are strongly needed in organic photovoltaics(OPVs). Herein,two medium bandgap(MBG) electron acceptors, TPT4F and TPT4Cl are developed via the new design of multi-noncovalent interaction assisted unfused core, flanked with two electron withdrawing end groups. These fullly non-fused MBG acceptors adapt the planar and rigid conformation in solid, therefore exhibiting the ordered face-on stacking and strong photoluminescence in films. As results, TPT4Cl^(-)based OPVs, upon blending with the PBDB-TF polymer donor, have achieved a power conversion efficiency of 10.16% with a low non-radiative loss of 0.27 e V, representing one of the best fullly non-fused medium bandgap acceptors with desirable cost-efficiency balance.展开更多
Over the past few years,the development of nonfullerene acceptors(NFAs)has become a prominent focus in both organic and perovskite solar cell(OSCs and PSCs,respectively)research fields.In this context,porphyrinoids,co...Over the past few years,the development of nonfullerene acceptors(NFAs)has become a prominent focus in both organic and perovskite solar cell(OSCs and PSCs,respectively)research fields.In this context,porphyrinoids,compounds structurally related to porphyrins,have emerged as promising solar cell candidates.In contrast to the widely used fullerene acceptors,porphyrinoids exhibit strong,broad absorption properties across the UV–vis/NIR spectrum,which can be easily tuned through chemical modifications.Furthermore,they can be prepared and derivatized using cost-effective and straightforward methodologies,allowing for convenient adjustments in thin-film morphology,processability,supramolecular organization,and energy levels.Additionally,these compounds offer higher thermal and photochemical stability,resulting in longer device lifetimes compared to their fullerene-based counterparts.In this review,we outline the utilization of porphyrinoids as NFAs in OSCs and PSCs,discussing essential aspects such as design guidelines,molecular properties,and device configuration.Our goal is to inspire and further promote the development of n-type porphyrinoids,which have not yet fully unleashed their potential.展开更多
Indoor organic and perovskite photovoltaics(PVs)have been attracting great interest in recent years.The theoretical limit of indoor PVs has been calculated based on the detailed balance method developed by Shockley–Q...Indoor organic and perovskite photovoltaics(PVs)have been attracting great interest in recent years.The theoretical limit of indoor PVs has been calculated based on the detailed balance method developed by Shockley–Queisser.However,realistic losses of the organic and perovskite PVs under indoor illumination are to be understood for further efficiency improvement.In this work,the efficiency limit of indoor PVs is calculated to 55.33%under indoor illumination(2700 K,1000 lux)when the bandgap(E_(g))of the semiconductor is 1.77 eV.The efficiency limit was obtained on the basis of assuming 100%photovoltaic external quantum efficiency(EQ_(EPV))when E≥E_(g),there was no nonradiative recombination,and there were no resistance losses.In reality,the maximum EQEPV reported in the literature is 0.80–0.90.The proportion of radiative recombination in realistic devices is only 10^(−5)–10^(−2),which causes the open-circuit voltage loss(ΔV_(loss))of 0.12–0.3 V.The fill factor(FF)of the indoor PVs is sensitive to the shunt resistance(R_(sh)).The realistic losses of EQE_(PV),nonradiative recombination,and resistance cause the large efficiency gap between the realistic values(excellent perovskite indoor PV,32.4%;superior organic indoor PV,30.2%)and the theoretical limit of 55.33%.In reality,it is feasible to reach the efficiency of 47.4%at 1.77 eV for organic and perovskite photovoltaics under indoor light(1000 lux,2700 K)with V_(OC)=1.299 V,J_(SC)=125.33μA/cm^(2),and FF=0.903 when EQE_(PV)=0.9,EQE_(EL)=10^(−1),R_(s)=0.5Ωcm^(2),and R_(sh)=10^(4) kΩcm^(2).展开更多
文摘Energy access is vital to a nation’s economic growth and its populace’s social well-being. Still, there is a lack of adequate energy in Nigeria, negatively affecting the country’s socio-economic development. Due to the inadequate energy supply, some manufacturing companies shut their operations, and most Nigerians now use backup generators (BUGs) with their attendant health hazards, environmental pollution, and global warming. The need for energy access and a sustainable energy supply through renewable energy (RE) resources necessitates adopting solar photovoltaics (PV) in Nigeria. Studies on Nigeria’s energy accessibility and sustainability are generally on RE development and a few on solar PV applications. This research covers the need for an in-depth analysis of the growth of solar PV in Nigeria, and the research question is: What factors promote or limit the adoption of solar photovoltaics in Nigeria? A method of Systematic Literature Review (SLR) and Thematic Analysis (TA) is employed for the analysis. The research findings are divided into drivers, barriers, and policies. Some identified factors promoting the adoption of solar PV are energy poverty and the urgency to improve electricity supply, the ease of its operation and maintenance, and the Nigerian government’s commitment to clean electricity supply with policy initiatives and increased awareness of solar PV applications. Conversely, some noticed factors mitigating the growth of solar PV are poor tariff systems, dual subsidies of electricity and petroleum, and lack of finance and economic incentives.
基金supported by the National Natural Science Foundation of China (Grant No. 11374226)the Fundamental Research Funds for the Universities of Henan Province of China (Grant No. NSFRF200331)+1 种基金the Foundation of Henan Educational Committee (Grant No. 20A140013)by the High-performance Grid Computing Platform of Henan Polytechnic University。
文摘Converting solar energy into electric power or hydrogen fuel is a promising means to obtain renewable green energy.Here, we design a two-dimensional blue phosphorene(BlueP)/MoSi2N4van der Waals heterostructure(vdWH) and investigate its potential application in photocatalysis and photovoltaics using first-principles calculations. We find that the BlueP/MoSi2N4vdWH possesses type-Ⅱ band structure with a large build-in electric field, thus endowing it with a potential ability to separate photogenerated electron–hole pairs. The calculated band-edge positions show that the heterostructure is a very promising water-splitting photocatalyst. Its solar-to-hydrogen efficiency(ηSTH) can reach up to 15.8%, which is quite promising for commercial applications. Furthermore, the BlueP/MoSi2N4vdWH shows remarkably light absorption capacity and distinguished maximum power conversion efficiency(ηPCE) up to 10.61%. Remarkably, its ηPCEcan be further enhanced by the external strain: the ηPCEof 21.20% can be obtained under a 4% tensile strain. Finally, we determine that adjusting the number of the BlueP sublayer is another effective method to modulate the band gaps and band alignments of the heterostructures. These theoretical findings indicate that BlueP/MoSi2N4vd WH is a promising candidate for photocatalyst and photovoltaic device.
基金supported by the State Grid Corporation of China Science and Technology Project(5216AG21000 K).
文摘The analysis of the loss of distributed photovoltaic power generation systems involves the interests of energy users,energy-saving service companies,and power grid companies,so it has always been the focus of the industry and society in some manner or another.However,the related analysis for an actual case that considers different cooperative corporations’benefits is lacking in the presently available literature.This paper takes the distributed rooftop photovoltaic power generation project in an industrial park as the object,studies the analysis and calculation methods of line loss and transformer loss,analyzes the change of transformer loss under different temperatures and different load rates,and compares the data and trend of electricity consumption and power generation in industrial parks before and after the photovoltaic operation.This paper explores and practices the analysis method of the operating loss of distributed photovoltaic power generation and provides an essential reference for the benefit analysis and investment cost estimation of distributed photovoltaic power generation systems in industrial parks.The analyzed results reveal that the change loss is stable after the photovoltaic is connected,and there is no additional transformer loss.And before and after the photovoltaic system installation,there was no significant change in the total monthly data difference between the total meter and the sub-meter.
基金the CSIRO Low Emissions Technologies Program for the support of this studythe financial support from the Australian Research Council(ARC)for the Future Fellowship(FT130101337)+4 种基金QUT core funding(QUT/322120-0301/07)supported by NSF MRI(1428992)U.S.-Egypt Science and Technology(S&T)Joint FundSDBoR R&D ProgramEDA University Center Program(ED18DEN3030025)。
文摘Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.
基金the financial supporting from the NSFC(61975006,61675017)NSFRPSI(Y72Z090Q10)+3 种基金the NSFCQ(cstc2019jcyj-msxm X0400)the NYTPP(R52A199Z11)the YIPACAS(E0296104)the BNSF(4192049)。
文摘Small molecule organic photovoltaics(SMPVs) were prepared by utilizing liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4 F and Y6.The BTPBO-4 F and Y6 have the similar optical bandgap and different absorption coefficients.The corresponding binary SMPVs exhibit different short circuit current density(/sc)(20.38 vs.23.24 mA cm^(-2)),and fill factor(FF)(70.77% vs.67.21%).A 14.46% power conversion efficiency(PCE) is acquired in ternary SMPVs with 30 wt% Y6,companied with a JSC of 24.17 mA cm^(-2) a FF of 68.78% and an open circuit voltage(Voc) of 0.87 V.The improvement on PCE of ternary SMPVs should originate from the well trade-off between phase separation and photon harvesting of ternary active layers by incorporating 30 wt% Y6 in acceptors.This work may deliver insight onto the improved performance of SMPVs by superposing the superiorities of binary SMPVs with similar optical bandgap acceptors into one ternary cell.
文摘A building integrated photovoltaic (PV) and fuel cell (FC) system is proposed for assessment of the energy self-sufficiency rate in a city in Japan. The electricity consumed in the building is mainly supplied by solar panels, while the gap between the energy demand and supply is solved by the FC that is powered by the H2 produced by water electrolysis with surplus power of PV. A desktop case study of using the proposed system in Tsu city which is located in central part of Japan, has been conducted. The results found that the self-sufficiency rates of PV system to electricity demand of households (RPV) during the daytime in April and July are higher than those in January and October. The results also reveal that the self-sufficiency rate of FC system to the electricity demand (RFC) is 15% - 38% for the day when the mean amount of horizontal solar radiation is obtained in January, April, July and October. In addition, it is found the optimum tilt angle of solar panel installed on the roof of the buildings should be 0 degree, i.e., placed horizontally.
基金supported by FP7 European collaborative project SUNFLOWER(FP7-ICT-2011-7contract No.287594)the Spanish Ministerio de Economía y Competitividad(project MAT2013-47192-C3-1-R)+1 种基金Generalitat Valenciana(project ISIC/2012/008 Institute of Nanotechnologies for Clean Energies)the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal Fellowship(RYC2014-16809)
文摘Organic photovoltaic devices are on the verge of commercialization with power conversion efficiencies exceeding 10 % in laboratory cells and above 8.5 % in modules. However, one of the main limitations hindering their mass scale production is the debatable inferior stability of organic photovoltaic devices in comparison to other technologies.Adequate donor/acceptor morphology of the active layer is required to provide carrier separation and transport to the electrodes. Unfortunately, the beneficial morphology for device performance is usually a kinetically frozen state which has not reached thermodynamic equilibrium. During the last 5 years, special efforts have been dedicated to isolate the effects related to morphology changes taking place within the active layer and compare to those affecting the interfaces with the external electrodes. The current review discusses some of the factors affecting the donor/acceptor morphology evolution as one of the major intrinsic degradation pathways. Special attention is paid to factors in the nano- and microscale domain.For example, phase segregation of the polymer and fullerene domains due to Ostwald ripening is a major factor in the microscale domain and is affected by the presence of additives, glass transition temperature of the polymers or use of crosslinkers in the active layer. Alternatively, the role of vertical segregation profile toward the external electrodes is key for device operation, being a clear case of nanoscale morphology evolution. For example, donor and acceptor molecules actually present at the external interfaces will determine the leakage current of the device, energy-level alignment, and interfacial recombination processes. Different techniques have been developed over the last few years to understand its relationship with the device efficiency. Of special interest are those techniques which enable in situ analysis being nondestructive as they can be used to study accelerated degradation experiments and some will be discussed here.
基金X.Z.acknowledges the funding support from National Science Foundation of China(NSFC)(No.61975073 and No.61605076)W.D.thanks the financial support from NSFC(No.11872199 and No.11932009).
文摘Solution processible photovoltaics(PV)are poised to play an important role in scalable manufacturing of low-cost solar cells.Electrospray is uniquely suited for fabricating PVs due to its several desirable characteristics of an ideal manufacturing process such as compatibility with roll-to-roll production processes,tunability and uniformity of droplet size,capability of operating at atmospheric pressure,and negligible material waste and nano structures.This review begins with an introduction of the fundamentals and unique properties of electrospray.We put emphasis on the evaporation time and residence time that jointly affect the deposition outcome.Then we review the efforts of electrospray printing polymer solar cells,perovskite solar cells,and dye sensitized solar cells.Collectively,these results demonstrate the advantages of electrospray for solution processed PV.Electrospray has also exhibited the capability of producing uniform films as well as nanostructured and even multiscale films.So far,the electrospray has been found to improve active layer morphology,and create devices with efficiencies comparable with that of spin-coating.Finally,we discuss challenges and research opportunities that enable electrospray to become a mainstream technique for industrial scale production.
基金funded by the National Key Research and Development Program of China (2017YFA0204800/2016YFA0202403)the Fundamental Research Funds for the Central Universities (2018CBLZ006)+5 种基金the National Natural Science Foundation of China (61604091 and 61674098)the 111 Project (B14041)the Changjiang Scholar and Innovative Research Team (IRT_14R33)the Chinese National 1000 Talents Plan program (1110010341)the China Postdoctoral Science foundation (2018M633455)the Fundamental Research Funds for the Central Universities (GK201903055)
文摘Two-dimensional(2D) layered organic-inorganic hybrid perovskites have attracted much more attention for some applications than their three-dimensional(3D) perovskite counterparts due to their promising thermal and moisture stabilities.In particular, the 2D perovskite devices have shown better promise for optoelectronic applications.However, tunability of optoelectronic properties is often demanded to improve the device performance.Herein, we adopt a newly method to tune the electronic properties of 2D perovskite by introducing pseudohalide into the structure.In this work, we designed a pseudohalidesubstituted 2D perovskite by substituting the out-of-plane halide with pseudohalide and studied the electronic and excitonic properties of 2D-BA2MX4 and 2D-BA2MX2Ps2(M=Ge^(2+), Sn^(2+), and Pb^(2+);X=I;Ps=NCO, NCS, OCN, SCN, Se CN).We revealed the dependence of electronic properties including band gaps, composition of band edges, bonding characteristics, work functions, effective masses, and exciton binding energies on different pseudohalides substituted in 2D perovskite.Our results indicate that the substitution of pseudohalide in 2D perovskites is energetically favorable and can significantly affect the bonding characteristics as well as the CBM and VBM that often play major role in determining their performance in optoelectronic devices.It is expected that the pseudohalide substitution will be helpful in developing more advanced optoelectronic device based on 2D perovskite by optimizing band alignment and promoting charge extraction.
基金supported by the National Natural Science Foundation of China(51873007,51961165102,and 21835006)the Fundamental Research Funds for the Central Universities in China(2019MS025,2018MS032,2017MS027,2017XS084)。
文摘Organic photovoltaics(OPVs)suitable for application in indoor lighting environments can power a wide range of internet of things(Io T)related electronic devices.The ternary structure has huge advantages in improving the photovoltaic performance of OPVs,including broadening the light absorption,improving the charge transport,manipulating the energy loss(E_(loss))and so on.Herein,we use wide-bandgap photo-active materials,including the benzotriazole-based polymer donor(J52-F),chlorinated polymer donor(PM7)and A_(2)-A_1-D-A_1-A_(2)-structured acceptor(BTA3),to construct ternary OPVs for indoor light applications.Benefitting from the introduction of PM7 as the third component in J52-F:BTA3-based blend,a gratifying PCE of 20.04%with a high V_(OC)of 1.00 V can be obtained under the test conditions with an illumination of 300 lx from an LED lighting source with a color temperature of 3000 K.The excellent device performance is inseparable from the matched spectrum,enhanced light absorption and the reduced E_(loss),while the improved charge transport capability and suppression of carrier recombination also play an indelible role.Our work shows a potential material system to meet the requirement of devices applied under indoor light.Moreover,these findings demonstrate that designing multi-component OPVs is indeed a feasible way to further improve the performances of the photovoltaic energy conversion system for indoor applications.
基金support of the National Natural Science Foundation of China (21875286)the National Key Research and Development Program of China (2017YFA0206600)。
文摘Balancing charge generation and low energy loss(E_(loss)), especially in the wide spectral absorption region is critical to obtain high-performance organic photovoltaics(OPVs). Therefore, Y11-M and Y11-EB are designed and synthesized through modifying alkyl chains on different nitrogen aromatic rings of the reported non-fullerene acceptor Y11. Although all the molecules have almost similar low band-gap(around 1.30 e V), Y11-M and Y11-EB exhibit wider absorption in 410–870 nm region. Eventually, the conventional devices based on Y11-M and Y11-EB possess more efficient charge generation with low Eloss(around 0.44 e V). In addition, outstanding efficiencies of 16.64% and 17.15% with the fill factor of 76.15% and 74.73% are obtained in PM6:Y11-M and PM6:Y11-EB-based devices, both higher than Y11:PM6. The results highlight the importance of rational alkyl chains optimization, and a good structureproperty relationship is established as well.
基金R.M.I.B.and S.M.S.gratefully acknowledge support from the University of Surrey scholarshipsR.M.I.B.,R.A.S.,C.C.L.U.,and S.R.P.S.also acknowledge funding from EPSRC(EP/R028559/1 and GR/1922310/1)+1 种基金S.M.S.and S.R.P.S acknowledge support SilverRay Ltd.K.D.G.I.J.and S.R.P.S.gratefully acknowledgefinancial support from the Equality Foundation of Hong Kong.
文摘Pb-Sn mixed perovskites are becoming increasingly popular as narrowbandgap(1.2–1.3 eV)light absorbers in single-junction perovskite solar cells(PSCs)and as bottom cells for all-perovskite tandem solar cells,for highefficiency,low-cost,lightweight,roll-to-roll printable photovoltaic(PV)applications.From the first report of planar Pb:Sn mixed PSCs in 2014,the power conversion efficiencies(PCE)have increased from 10%to 21%by the end of 2020 with an exponential growth in research conducted in this field.Despite much effort,the performance and stability of Pb-Sn mixed PSCs are still limited,which constrains their long-term use in all-perovskite tandem devices.This review highlights the avenues explored in improving different aspects of Pb-Sn mixed PSCs and provides a comprehensive discussion of the interdependent factors affecting the device performance.This includes compositional engineering of the perovskite crystal,absorber layer fabrication and crystallization methods,bandgap tuning,Sn4+reduction,and surface passivation of the absorber layer,as well as the selection of interlayers and electrodes of the final PSC.
文摘A building integrated energy system (photovoltaic (PV) and fuel cell (FC)) is proposed for assessment of the energy self-sufficiency rate in five cities of Mie prefecture in Japan. In this work, it is considered that the electricity requirement of the building is provided by the building integrated photovoltaic (BIPV) system and the gap between the energy demand and BIPV supply is fulfilled by the FC. The FC is powered by the electrolytic H2 produced from the surplus power of PV. A design study of using the proposed system in five cities in Mie prefecture, which are in center part of Japan, has been performed. It has been observed that the monthly power production from BIPV is higher in spring and summer, while it is lower in autumn and winter at all considered locations. The self-sufficiency rate of the FC system is higher with decreasing households’ number and it has been observed that the 12 households are more suitable for full cover of the electricity demand by the combined system of PV and FC. The relationship between the households’ number and self-sufficiency rate of the FC system per solar PV installation area can be expressed by exponential curve. The coefficient of the exponential curve can predict the suitable city for the BIPV system with FC system utilizing electrolytic H2 generated by using excess energy from the PV system.
文摘Photovoltaics(PV-also called solar photovoltaic devices)are used to harness the power of the sun via the electronic process that occurs within semiconductor cells.The solar energy is absorbed by the cells,which causes the electrons to break away from their atoms,allowing them to flow within the material to produce electricity.This electricity will become the renewable energy for Kentucky,as the generation of coal will but come to a stop within the near future.Like Denmark who is running on 100%renewable generation we must stride to become fully operational on solar.In the present work,we systematically studied about renewable energy resources,in particular,solar energy for the application of photovoltaic panels in Eastern Kentucky.By analyzing data from our PV cells at Morehead State University designed to follow the direction of the sun for optimized output and by incorporating MPPT charge controllers,we have constructed a maximum power algorithm that performs best for the location.Utilizing these,measurements of daily electricity production in comparison to the average power needed for household use has validated our research.With the advancements in solar cell technology what was once impossible is now reality,as solar power can easily power this region based on our data.Knowing this,being a prime location we can now push to enable the advancement of renewable energy production and become less dependent on fossil fuels,thus creating an infrastructure that will run off solar power.
文摘Photovoltaics(PV)can convert sunlight into electricity by making use of the photovoltaic effect.Solar panels consist of photovoltaic cells made of semiconductor materials(such as silicon)to utilise the photovoltaic effect and convert sunlight into direct current(DC)electricity.Nowadays,PV has become the cheapest electrical power source with low price bids and low panel prices.The competitiveness makes it a potential path to mitigate the global warming.In this paper,we investigate the relationship of PC array output with irradiance and temperature,the performance of PV array over 24 hours period,and the simulation of PV micro grid by MATLAB simulation.
文摘For cases in which a robot with installed solar cells and a sensor operates in a nuclear reactor building or in space for extravehicular activity, we require elastic and extensible solar cells. More than two different types of sensing are also required, minimally with photovoltaics and built-in electricity. Magnetic compound fluid (MCF) rubber solar cells are made of rubber, so they are elastic and extensible as well as sensitive. To achieve flexibility and an effective photovoltaic effect, MCF rubber solar cells must include both soluble and insoluble rubbers, Fe<sub>3</sub>O<sub>4</sub>, TiO<sub>2</sub>, Na<sub>2</sub>WO<sub>4</sub>∙2H<sub>2</sub>O, etc. On the basis of this constitution, we propose a consummate fabrication process for MCF rubber solar cells. The characteristics of these cells result from the semiconductor-like role of the molecules of TiO<sub>2</sub>, Fe<sub>3</sub>O<sub>4</sub>, Ni, Na<sub>2</sub>WO<sub>4</sub>∙2H<sub>2</sub>O, polydimethylsiloxane (PDMS), natural rubber (NR), oleic acid, polyvinyl alcohol (PVA), water and magnetic cluster involved in the MCF rubber. Their tendencies can be deduced by synthesizing knowledge about the enhancement of the reverse-bias saturation current <em>I</em><sub><em>S</em></sub> and the diode ideality factor <em>N</em>, with conventional knowledge about the semiconductor affected by <em>γ</em>-irradiation and the attenuation of the photon energy of <em>γ</em>-rays.
基金supported by the National Natural Science Foundation of China(Grant Nos.61274066,61474115,and 61504138)the National High Technology Research and Development Program of China(Grant No.2014AA032602)
文摘We investigate slanted silicon nanocone hole arrays as light absorbing structures for solar photovoltaics via simulation.With only 1-μm equivalent thickness, a maximum short-circuit current density of 34.9 m A/cm^2 is obtained. Moreover, by adding an Ag mirror under the whole structure, a short-circuit current density of 37.9 m A/cm^2 is attained. It is understood that the optical absorption enhancement mainly results from three aspects. First, the silicon nanocone holes provide a highly efficient antireflection effect. Second, after breaking the geometric symmetry, the slanted silicon nanocone hole supports more resonant absorption modes than vertical structures. Third, the Fabry–Perot resonance enhances the light absorption after adding an Ag mirror.
基金funded by the National Natural Science Foundation of China(22125901 and 21722404)the Research Grants Council(RGC)of Hong Kong(General Research Fund(14303519)+3 种基金the Joint Laboratory Funding Scheme Project(JLFS/P-102/18)the NSFC/RGC Joint Research Scheme Grant(NCUHK418/17))the CUHK direct grant(4442384)the beam time and technical support provided by Chun-Jen Su and U-Ser Jeng form Synchrotron Radiation Research Center,Hsinchu Science Park,Taiwan,China。
文摘The cost-effective organic semiconductors are strongly needed in organic photovoltaics(OPVs). Herein,two medium bandgap(MBG) electron acceptors, TPT4F and TPT4Cl are developed via the new design of multi-noncovalent interaction assisted unfused core, flanked with two electron withdrawing end groups. These fullly non-fused MBG acceptors adapt the planar and rigid conformation in solid, therefore exhibiting the ordered face-on stacking and strong photoluminescence in films. As results, TPT4Cl^(-)based OPVs, upon blending with the PBDB-TF polymer donor, have achieved a power conversion efficiency of 10.16% with a low non-radiative loss of 0.27 e V, representing one of the best fullly non-fused medium bandgap acceptors with desirable cost-efficiency balance.
基金T.T.acknowledges financial support from the Spanish MCIN/AEI/10.13039/501100011033(PID2020-116490GBI00,TED2021-131255B-C43)the Comunidad de Madrid and the Spanish State through the Recovery,Transformation and Resilience Plan[“Materiales Disruptivos Bidimensionales(2D)”(MAD2D-CM)(UAM1)-MRR Materiales Avanzados]+2 种基金the European Union through the Next Generation EU funds.Instituto madrileno de estudios avanzados Nanociencia acknowledges support from the“Severo Ochoa”Programme for Centres of Excellence in R&D(Ministerio de asuntos economicos y transformacion digital,Grant SEV2016-0686)T.T.also acknowledges the Alexander von Humboldt Foundation(Germany)for the A.v.Humboldt-J.C.Mutis Research Award 2023(Ref 3.3-1231125-ESP-GSA)J.L.acknowledgesMinisterio de Eduacion,Cultura y Deporte(MECD),Spain,for an F.P.U.Fellowship.
文摘Over the past few years,the development of nonfullerene acceptors(NFAs)has become a prominent focus in both organic and perovskite solar cell(OSCs and PSCs,respectively)research fields.In this context,porphyrinoids,compounds structurally related to porphyrins,have emerged as promising solar cell candidates.In contrast to the widely used fullerene acceptors,porphyrinoids exhibit strong,broad absorption properties across the UV–vis/NIR spectrum,which can be easily tuned through chemical modifications.Furthermore,they can be prepared and derivatized using cost-effective and straightforward methodologies,allowing for convenient adjustments in thin-film morphology,processability,supramolecular organization,and energy levels.Additionally,these compounds offer higher thermal and photochemical stability,resulting in longer device lifetimes compared to their fullerene-based counterparts.In this review,we outline the utilization of porphyrinoids as NFAs in OSCs and PSCs,discussing essential aspects such as design guidelines,molecular properties,and device configuration.Our goal is to inspire and further promote the development of n-type porphyrinoids,which have not yet fully unleashed their potential.
基金supported by the National Natural Science Foundation of China(Nos.52273180 and 51973074)the China Postdoctoral Science Foundation(Nos.2019M662614 and 2020M682404)the WNLO Funds for Innovation.
文摘Indoor organic and perovskite photovoltaics(PVs)have been attracting great interest in recent years.The theoretical limit of indoor PVs has been calculated based on the detailed balance method developed by Shockley–Queisser.However,realistic losses of the organic and perovskite PVs under indoor illumination are to be understood for further efficiency improvement.In this work,the efficiency limit of indoor PVs is calculated to 55.33%under indoor illumination(2700 K,1000 lux)when the bandgap(E_(g))of the semiconductor is 1.77 eV.The efficiency limit was obtained on the basis of assuming 100%photovoltaic external quantum efficiency(EQ_(EPV))when E≥E_(g),there was no nonradiative recombination,and there were no resistance losses.In reality,the maximum EQEPV reported in the literature is 0.80–0.90.The proportion of radiative recombination in realistic devices is only 10^(−5)–10^(−2),which causes the open-circuit voltage loss(ΔV_(loss))of 0.12–0.3 V.The fill factor(FF)of the indoor PVs is sensitive to the shunt resistance(R_(sh)).The realistic losses of EQE_(PV),nonradiative recombination,and resistance cause the large efficiency gap between the realistic values(excellent perovskite indoor PV,32.4%;superior organic indoor PV,30.2%)and the theoretical limit of 55.33%.In reality,it is feasible to reach the efficiency of 47.4%at 1.77 eV for organic and perovskite photovoltaics under indoor light(1000 lux,2700 K)with V_(OC)=1.299 V,J_(SC)=125.33μA/cm^(2),and FF=0.903 when EQE_(PV)=0.9,EQE_(EL)=10^(−1),R_(s)=0.5Ωcm^(2),and R_(sh)=10^(4) kΩcm^(2).
