Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffractio...Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffraction and micron CT scanning. The parametamorphic rock reservoirs mainly had three types of rocks: slate, crystalline limestone and calc-schist; the original rocks were Ordovician-Silurian marine clastic and carbonate rocks. The three types of parametamorphic rock reservoirs developed three types and six sub-types of reservoir space. The first type of reservoir space was fractures, including structural, weathered and dissolution fractures; the second type was dissolved porosities, including dissolved pores and caves; the third type was nano-sized intercrystalline porosities. The three types of parametamorphic rock reservoirs were different widely in the quantity, volume and radius of pore-throats, and were strongly affected by the type and development degree of fractures. The parametamorphic rock reservoirs were formed by metamorphism, weathering, structural fragmentation and dissolution. Metamorphism reformed the parametamorphic rock reservoirs significantly, breaking the traditional constraint of finding weathering crust at top. The parametamorphic rock reservoirs experienced five formation stages, and their distribution was controlled by rock type, metamorphic degree, ancient geomorphology, and weathering intensity.展开更多
This paper reviews 19 apparatuses having highvelocity capabilities,describes a rotary-shear low to highvelocity friction apparatus installed at Institute of Geology,China Earthquake Administration,and reports results ...This paper reviews 19 apparatuses having highvelocity capabilities,describes a rotary-shear low to highvelocity friction apparatus installed at Institute of Geology,China Earthquake Administration,and reports results from velocity-jump tests on Pingxi fault gouge to illustrate technical problems in conducting velocity-stepping tests at high velocities.The apparatus is capable of producing plate to seismic velocities(44 mm/a to 2.1 m/s for specimens of 40 mm in diameter),using a 22 kW servomotor with a gear/belt system having three velocity ranges.A speed range can be changed by 103 or 106by using five electromagnetic clutches without stopping the motor.Two cam clutches allow fivefold velocity steps,and the motor speed can be increased from zero to 1,500 rpm in 0.1-0.2 s by changing the controlling voltage.A unique feature of the apparatus is a large specimen chamber where different specimen assemblies can be installed easily.In addition to a standard specimen assembly for friction experiments,two pressure vessels were made for pore pressures to 70 MPa;one at room temperature and the other at temperatures to 500 °C.Velocity step tests are needed to see if the framework of rate-and-state friction is applicable or not at high velocities.We report results from velocity jump tests from 1.4 mm/s to 1.4 m/s on yellowish gouge from a Pingxi fault zone,located at the northeastern part of the Longmenshan fault system that caused the 2008 Wenchuan earthquake.An instantaneous increase in friction followed by dramatic slip weakening was observed for the yellowish gouge with smooth sliding surfaces of host rock,but no instantaneous response was recognized for the same gouge with roughened sliding surfaces.Instantaneous and transient frictional properties upon velocity steps cannot be separated easily at high velocities,and technical improvements for velocity step tests are suggested.展开更多
基金Supported by the China National Science and Technology Major Project(2017ZX05001-002)
文摘Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffraction and micron CT scanning. The parametamorphic rock reservoirs mainly had three types of rocks: slate, crystalline limestone and calc-schist; the original rocks were Ordovician-Silurian marine clastic and carbonate rocks. The three types of parametamorphic rock reservoirs developed three types and six sub-types of reservoir space. The first type of reservoir space was fractures, including structural, weathered and dissolution fractures; the second type was dissolved porosities, including dissolved pores and caves; the third type was nano-sized intercrystalline porosities. The three types of parametamorphic rock reservoirs were different widely in the quantity, volume and radius of pore-throats, and were strongly affected by the type and development degree of fractures. The parametamorphic rock reservoirs were formed by metamorphism, weathering, structural fragmentation and dissolution. Metamorphism reformed the parametamorphic rock reservoirs significantly, breaking the traditional constraint of finding weathering crust at top. The parametamorphic rock reservoirs experienced five formation stages, and their distribution was controlled by rock type, metamorphic degree, ancient geomorphology, and weathering intensity.
基金supported by State Key Laboratory of Earthquake Dynamics (Project No.LED2014A06 & LED2010A05)
文摘This paper reviews 19 apparatuses having highvelocity capabilities,describes a rotary-shear low to highvelocity friction apparatus installed at Institute of Geology,China Earthquake Administration,and reports results from velocity-jump tests on Pingxi fault gouge to illustrate technical problems in conducting velocity-stepping tests at high velocities.The apparatus is capable of producing plate to seismic velocities(44 mm/a to 2.1 m/s for specimens of 40 mm in diameter),using a 22 kW servomotor with a gear/belt system having three velocity ranges.A speed range can be changed by 103 or 106by using five electromagnetic clutches without stopping the motor.Two cam clutches allow fivefold velocity steps,and the motor speed can be increased from zero to 1,500 rpm in 0.1-0.2 s by changing the controlling voltage.A unique feature of the apparatus is a large specimen chamber where different specimen assemblies can be installed easily.In addition to a standard specimen assembly for friction experiments,two pressure vessels were made for pore pressures to 70 MPa;one at room temperature and the other at temperatures to 500 °C.Velocity step tests are needed to see if the framework of rate-and-state friction is applicable or not at high velocities.We report results from velocity jump tests from 1.4 mm/s to 1.4 m/s on yellowish gouge from a Pingxi fault zone,located at the northeastern part of the Longmenshan fault system that caused the 2008 Wenchuan earthquake.An instantaneous increase in friction followed by dramatic slip weakening was observed for the yellowish gouge with smooth sliding surfaces of host rock,but no instantaneous response was recognized for the same gouge with roughened sliding surfaces.Instantaneous and transient frictional properties upon velocity steps cannot be separated easily at high velocities,and technical improvements for velocity step tests are suggested.