Based on the mechanism for the generation of chaos in a buck converter, a pole placement method is proposed and applied to controlling the chaos in a circuit. The control circuit is designed and tested. Numerical calc...Based on the mechanism for the generation of chaos in a buck converter, a pole placement method is proposed and applied to controlling the chaos in a circuit. The control circuit is designed and tested. Numerical calculation and circuit implementation demonstrate the validity of this chaos control method.展开更多
The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according...The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.展开更多
The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem. Field testi...The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem. Field testing is an important method for research on dynamic identification and vibration mechanisms. Research on optimal sensor placement has become a very important topic due to the need to obtain effective testing information from limited test resources. To overcome inadequacies of the present methods, this paper puts forward the triaxial effective independence driving-point residue （EfI3-DPR3） method for optimal sensor placement. The Efl3-DPR3 method can incorporate both the maximum triaxial modal kinetic energy and linear independence of the triaxial target modes at the selected nodes. It was applied to the optimal placement oftriaxial sensors for vibration testing in a hydropower house, and satisfactory results were obtained. This method can provide some guidance for optimal placement of triaxial sensors of underground powerhouses.展开更多
This paper considers the pole placement in multivariable systems involving known delays by using dynamic controllers subject to multirate sampling. The controller parameterizations are calculated from algebraic equati...This paper considers the pole placement in multivariable systems involving known delays by using dynamic controllers subject to multirate sampling. The controller parameterizations are calculated from algebraic equations which are solved by using the Kronecker product of matrices. It is pointed out that the sampling periods can be selected in a convenient way for the solvability of such equations under rather weak conditions provided that the continuous plant is spectrally controllable. Some overview about the use of nonuniform sampling is also given in order to improve the system's performance.展开更多
[目的]核电厂汽水管线一般在管道外壁加装保温层,从而提高换热效率。目前对于铁磁性管道的检测手段主要为常规超声及超声导波,检测前需要将管道外壁保温层拆除,导致检测工期延长,人力成本增加,无法达到核电厂高质量发展的要求。核电厂...[目的]核电厂汽水管线一般在管道外壁加装保温层,从而提高换热效率。目前对于铁磁性管道的检测手段主要为常规超声及超声导波,检测前需要将管道外壁保温层拆除,导致检测工期延长,人力成本增加,无法达到核电厂高质量发展的要求。核电厂脉冲涡流技术的应用可以省去保温层的拆装,实现不停机在线筛查。检测线圈的放置方式对缺陷的检出能力是脉冲涡流技术重要指标。[方法]文章利用ANSYS中的Maxwell模块进行管件建模及仿真,分别设计同轴式与垂直式检测线圈,保持提离距离、材料一致及其他条件一致下,模拟脉冲涡流对平底缺陷的检测能力。选取核电厂样管进行同轴式与垂直式脉冲涡流测试,将脉冲涡流(Pulsed Eddy Current Testing,PECT)测试结果与超声测厚进行复核,对比两种线圈放置方式对脉冲涡流检测的影响。[结果]研究表明:垂直式线圈相对于同轴式线圈对缺陷检出效果更佳。[结论]核电厂脉冲涡流技术的应用对脉冲涡流技术在核电领域实施具有重要意义。展开更多
Tetrapod, one of the well-known artificial concrete units, is frequently used as an armor unit on breakwaters. Two layers of tetrapod units are normmaly placed on the breakwaters with different placement methods. In t...Tetrapod, one of the well-known artificial concrete units, is frequently used as an armor unit on breakwaters. Two layers of tetrapod units are normmaly placed on the breakwaters with different placement methods. In this study, the stability of tetrapod units with two different regularly placement methods are investigated experimentally in irregular waves. Stability coefficients of tetrapod units for both placement methods are obtained. The important characteristic wave parameters of irregular waves causing the same damage ratio as those of the regular waves are also determined. It reveals that the average of one-tenth highest wave heights within the wave train （H1/lo） causes the similar damage as regular waves.展开更多
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10247005 and 70571017）, the Guangxi New Century Foundation for Ten, Hundred and Thousand Talents （Grant No 2002226）.
文摘Based on the mechanism for the generation of chaos in a buck converter, a pole placement method is proposed and applied to controlling the chaos in a circuit. The control circuit is designed and tested. Numerical calculation and circuit implementation demonstrate the validity of this chaos control method.
文摘The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.
基金supported by the National Natural Science Foundation of China (Grant No. 50909072)the New Teachers' Fund for Doctor Station, the Ministry of Education of China (Grant No. 20090032120082)the Communication Research Item for the West Area, the Ministry of Communications of China (Grant No. 2009328000084)
文摘The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem. Field testing is an important method for research on dynamic identification and vibration mechanisms. Research on optimal sensor placement has become a very important topic due to the need to obtain effective testing information from limited test resources. To overcome inadequacies of the present methods, this paper puts forward the triaxial effective independence driving-point residue （EfI3-DPR3） method for optimal sensor placement. The Efl3-DPR3 method can incorporate both the maximum triaxial modal kinetic energy and linear independence of the triaxial target modes at the selected nodes. It was applied to the optimal placement oftriaxial sensors for vibration testing in a hydropower house, and satisfactory results were obtained. This method can provide some guidance for optimal placement of triaxial sensors of underground powerhouses.
文摘This paper considers the pole placement in multivariable systems involving known delays by using dynamic controllers subject to multirate sampling. The controller parameterizations are calculated from algebraic equations which are solved by using the Kronecker product of matrices. It is pointed out that the sampling periods can be selected in a convenient way for the solvability of such equations under rather weak conditions provided that the continuous plant is spectrally controllable. Some overview about the use of nonuniform sampling is also given in order to improve the system's performance.
文摘[目的]核电厂汽水管线一般在管道外壁加装保温层,从而提高换热效率。目前对于铁磁性管道的检测手段主要为常规超声及超声导波,检测前需要将管道外壁保温层拆除,导致检测工期延长,人力成本增加,无法达到核电厂高质量发展的要求。核电厂脉冲涡流技术的应用可以省去保温层的拆装,实现不停机在线筛查。检测线圈的放置方式对缺陷的检出能力是脉冲涡流技术重要指标。[方法]文章利用ANSYS中的Maxwell模块进行管件建模及仿真,分别设计同轴式与垂直式检测线圈,保持提离距离、材料一致及其他条件一致下,模拟脉冲涡流对平底缺陷的检测能力。选取核电厂样管进行同轴式与垂直式脉冲涡流测试,将脉冲涡流(Pulsed Eddy Current Testing,PECT)测试结果与超声测厚进行复核,对比两种线圈放置方式对脉冲涡流检测的影响。[结果]研究表明:垂直式线圈相对于同轴式线圈对缺陷检出效果更佳。[结论]核电厂脉冲涡流技术的应用对脉冲涡流技术在核电领域实施具有重要意义。
基金the Research Foundation of Yildiz Technical University for their financial support
文摘Tetrapod, one of the well-known artificial concrete units, is frequently used as an armor unit on breakwaters. Two layers of tetrapod units are normmaly placed on the breakwaters with different placement methods. In this study, the stability of tetrapod units with two different regularly placement methods are investigated experimentally in irregular waves. Stability coefficients of tetrapod units for both placement methods are obtained. The important characteristic wave parameters of irregular waves causing the same damage ratio as those of the regular waves are also determined. It reveals that the average of one-tenth highest wave heights within the wave train （H1/lo） causes the similar damage as regular waves.
