The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different pol...The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.展开更多
Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation d...Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.展开更多
Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits the...Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits their practical applications.Herein,we present a Hofmeister effect-aided facile strategy to prepare high-performance poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels.Layered montmorillonite nanosheets can not only serve as crosslinking agents to enhance the mechanical properties of the hydrogel but also promote the ion conduction.More importantly,based on the Hofmeister effect,the presence of(NH_(4))_(2)SO_(4)can endow nanocomposite hydrogels with excellent mechanical properties by affecting PVA chains'aggregation state and crystallinity.As a result,the as-prepared nanocomposite hydrogels possess unique physical properties,including robust mechanical and electrical properties.The as-prepared hydrogels can be further assembled into a high-performance flexible sensor,which can sensitively detect large-scale and small-scale human activities.The simple design concept of this work is believed to provide a new prospect for developing robust nanocomposite hydrogels and flexible devices in the future.展开更多
Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embe...Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embedded are stable in the PVA matrix when the membrane is immerged in water or methanol solution atroom temperature. Conductivity of the composite membranes scatters around 10-3 S.cm-1 at room temperature.The methanol crossover through the membranes is about an order of magnitude lower than that through Nafion117 membrane.展开更多
Hydrogels composed of poly(vinyl alcohol)(PVA) and poly(ethylene glycol)(PEG) were synthesized using glutaraldehyde as crosslinker and investigated for controlled delivery of the common anti-inflammatory drug, ibuprof...Hydrogels composed of poly(vinyl alcohol)(PVA) and poly(ethylene glycol)(PEG) were synthesized using glutaraldehyde as crosslinker and investigated for controlled delivery of the common anti-inflammatory drug, ibuprofen(IBF). To regulate the drug delivery, solid inclusion complexes(ICs) of IBF in β–cyclodextrin(β–CD) were prepared and added to the hydrogels. The ICs were prepared by the microwave irradiation method, which is more environmentally benign. The formation of IC was confirmed by various analytical techniques and the synthesized hydrogels were also characterized. Controlled release of drug was achieved from the hydrogels containing the ICs in comparison to the rapid release from hydrogels containing free IBF.The preliminary kinetic analysis emphasized the crucial role of β–CD in the drug release process that influences the polymer relaxation, thereby leading to prolonged release. The cytotoxicity assay validated the hydrogels as non-toxic in nature and hence can be utilized for controlled delivery of IBF.展开更多
The blend films with gelatin and poly（vinyl alcohol） （PVA） were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-tran...The blend films with gelatin and poly（vinyl alcohol） （PVA） were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-transform infrared spectroscopy （FTIR）, x-ray diffraction （XRD）, thermogravimetry analysis （TG）, and differential scanning calorimetry （DSC） were employed to characterize the resultant blend films. According to optic result, the opacity of the blend film at the ratio of 20/80 （w/w, Gel to PVA） was the lowest, indicating the best compatibility between Gel and PVA at the ratio. The results oflR, XRD, DSC, and TG revealed an intensive interaction and good compatibility between them in the blend film at the ratio. The mechanical properties and solubility showed that PVA content in the blend films obviously affected the elongation at break and solubility. The mechanical properties and water resistance of gelatin film may be improved by the introduetion of PVA.展开更多
Poly(hydroxybutyrate)/poly(vinyl alcohol)(PHB/PVA)blends plasticized with glycerol were prepared by melt blending of PHB and glycerol plasticized PVA.The PHB/PVA-glycerol compositions were 90:10,75:25 and 50:50 w/w,be...Poly(hydroxybutyrate)/poly(vinyl alcohol)(PHB/PVA)blends plasticized with glycerol were prepared by melt blending of PHB and glycerol plasticized PVA.The PHB/PVA-glycerol compositions were 90:10,75:25 and 50:50 w/w,being the concentration of glycerol in the PVA mixture of 10 wt%.The blends were characterized by infrared spectroscopy,dynamic-mechanical thermal analysis,and scanning electron microscope of the fragile fractured surface.The results showed one single phase blend,indicating miscibility corroborated by the presence of a single glass transition temperature.The blending method proved to be an efficient way to tune PHB properties keeping its biodegradable nature since both PVA and glycerol are fully biodegradable materials.展开更多
Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.The water loss properties of the resultant hydrogel were investigated by using optical microscope.Long time i...Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.The water loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests of PVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling properties with the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long time immersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HA composite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel in the calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and its equilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the network structure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content. Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium are obtained when the HA content is 3% and the number of freezing-thawing cycles is 7.展开更多
Crosslinked poly(vinyl alcohol)(PVA)based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells(DEFC).The membranes were functionalised by means of the addition of gr...Crosslinked poly(vinyl alcohol)(PVA)based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells(DEFC).The membranes were functionalised by means of the addition of graphene oxide(GO)and sulfonated graphene oxide(SGO)and crosslinked with sulfosuccinic acid(SSA).The chemical structure was corroborated and suitable thermal properties were found.Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes,a significant reduction of the ethanol solution swelling and crossover was encountered,more relevant for those functionalised with SGO.In general,the composite membranes were stable under simulated service conditions.The addition of GO and SGO particles permitted to buffer the loss and almost retain similar proton conductivity than prior to immersion.These membranes are alternative polyelectrolytes,which overcome current concerns of actual commercial membranes such as the high cost or the crossover phenomenon.展开更多
Polymers and polymeric composites have steadily reflected their importance in our daily life. Blending poly(vinyl alcohol) (PVA) with a potentially useful natural biopolymers such as hydroxypropyl cellulose (HPC) seem...Polymers and polymeric composites have steadily reflected their importance in our daily life. Blending poly(vinyl alcohol) (PVA) with a potentially useful natural biopolymers such as hydroxypropyl cellulose (HPC) seems to be an interesting way of preparing a polymeric blends. In the present work, blends of PVA/HPC of compositions (100/0, 90/10, 75/25, 50/50, 25/75, and 0/100 wt/wt%) were prepared to be used as bioequivalent materials. Thermal analyses [differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)], and X-ray diffraction (XRD) were employed to characterize and reveal the miscibility map and the structural properties of such blend system. The obtained results of the thermal analyses showed variations in the glass transition temperature (Tg) indicating the miscibility of the blend systems. Moreover, the changes in the melting temperature (Tm), shape and area were attributed to the different degrees of crystallinity and the existence of polymer-polymer interactions between PVA and HPC molecules. The X-ray diffraction (XRD) analysis showed broadening and sharpening of peaks at different HPC concentrations with PVA. This indicated changes in the crystallinity/amorphosity ratio, and also suggested that the miscibility between the amorphous components of homo-polymers PVA and HPC is possible. The results showed that HPC doped in PVA film can improve the thermal stability of the film under investigation, leading to interesting technological applications.展开更多
The physically crosslinked poly（vinyl alcohol）/chitosan （CS） composite hydrogels were prepared by cyclic freezing/thawing techniques, and the microstructure and swelling behavior of the hydrogels in the simulated ...The physically crosslinked poly（vinyl alcohol）/chitosan （CS） composite hydrogels were prepared by cyclic freezing/thawing techniques, and the microstructure and swelling behavior of the hydrogels in the simulated gastric （pH 1.0） and intestinal （pH 7.4） media were investigated. The experimental results of infrared spectra （IR）, scanning electron microscope （SEM） and differential scanning calorimetry （DSC） demonstrated that poly（vinyl alcohol） and chitosan had good miscibility in the composite hydrogels, and the addition of chitosan perturbed the formation of poly（vinyl alcohol） crystallites. The swelling kinetics results indicated that the composite hydrogels had good pH sensitive properties to the acidic environments, and with the increase of chitosan content in the blend, the maximum swelling degreed and the swelling rate both increased, but it led to more dissolution at pH 1.0. And the composite hydrogels also exhibited good reversible swelling behavior with pH value of the swelling medium altering between 1.0 and 7.4. In addition, the higher freezing/thawing cycle times resulted in the lower swelling rate. Therefore, the swelling behavior of the composite hydrogels could be adjusted by changing the chitosan contents and the freezing/thawing cycle times.展开更多
Chloro ethane dimethyl sulfoxide,C_2H_5Cl·DMSO(ECI·DMSO)was prepared by interaction of acrylic acid with conc.Hydrochloric acid in dimethyl sulfoxide(DMSO)and subsequent decarboxylation with H_2O_2 solution....Chloro ethane dimethyl sulfoxide,C_2H_5Cl·DMSO(ECI·DMSO)was prepared by interaction of acrylic acid with conc.Hydrochloric acid in dimethyl sulfoxide(DMSO)and subsequent decarboxylation with H_2O_2 solution.The formation of the compound was confirmed by spectral and analytical methods;the molecular weight was determined by cryoscopic method.The solubility of poly(vinyl alcohol)(PVA)in different solvents or mixed solvents at 40℃,50℃and 60℃temperature in the presence of 0.01% of EC1·-DMSO was determined.It tu...展开更多
The emulsion polymerization of highly shear-stable copolymer dispersions of methyl methacrylate and butyl acrylate were carried out using poly （vinyl alcohol） with a thiol end group （PVA-SH） as protective colloid....The emulsion polymerization of highly shear-stable copolymer dispersions of methyl methacrylate and butyl acrylate were carried out using poly （vinyl alcohol） with a thiol end group （PVA-SH） as protective colloid. The dispersions can be transformed into corresponding redispersible powder via a spray dryingcooling process. On-line FT-IR monitoring shows that grafting polymer of PVA-g-PMMA was formed mainly at the stage-1 of the emulsion polymerization. TEM images show, the PVA-SH shell was fragmentary when adding SDS at initial stage and integrated when adding at particle growing or final stage. The particle size turns to be smaller when delayed adding SDS surfactant. Triethanolamine, a co-regulator of PVA-SH, controlled the M to 50 000-70 000 and reduced the PDI to 1.5-1.7. The acrylic dispersions with 0.8wt%-1.5wt% PVA-SH1 can be spray-dried into super dispersible polymer powder （SDPP）, which can easily disperse in water and form recon- stituted dispersions with an average particle size smaller than 1 micron.展开更多
Adsorptive enhancements of several water-soluble polymers on copper(Ⅱ) were studied by adsorptive stripping voltammetry with a hanging mercury drop electrode. Increases in peak current of cu(Ⅱ) were observed in al...Adsorptive enhancements of several water-soluble polymers on copper(Ⅱ) were studied by adsorptive stripping voltammetry with a hanging mercury drop electrode. Increases in peak current of cu(Ⅱ) were observed in alkaline carbonate media. The enhancing power of poly(vinyl alcohol), starch and polyallylamine is 15, 4. 1, and 2.5 times, repectively展开更多
Electrospun poly(vinyl alcohol)/chitosan nanofibers had their solution and process parameters optimized using a Box-Behnken design and desirability function. Four factors (applied voltage, flow rate, distance tip-to-p...Electrospun poly(vinyl alcohol)/chitosan nanofibers had their solution and process parameters optimized using a Box-Behnken design and desirability function. Four factors (applied voltage, flow rate, distance tip-to-plate and amount of chitosan) were varied to produce electrospun mats with a low fiber diameter. An empirical model was developed for each response using response surface methodology (RSM), which revealed that flow rate had no significant influence on the assessed responses. With desirability function, the optimal conditions to produce the nanofibers were applied voltage of 13.1 kV, 30% chitosan concentration and distance tip-to-plate of 10 cm. The fiber diameter and standard deviation were 196.5 ± 28.3 nm, compared to the predicted values of 185.9 ± 26.8 nm. The desirability function allied with Box-Benhken design proved themselves important tools to predict process parameters for the development of nanofibers. The mats were crosslinked with glutaraldehyde for 24 h and 48 h and presented good water stability and enhanced mechanical properties.展开更多
Polymer clay nanocomposites (PCN) materials are industrially applied because of their unique properties. However many of their physical and chemical properties have not been determined. The formed structures of polyme...Polymer clay nanocomposites (PCN) materials are industrially applied because of their unique properties. However many of their physical and chemical properties have not been determined. The formed structures of polymer/clay nanocomposite depend on the nature of interactions between polymer chains and clay platelets. According to the possible modes of interactions between polymer matrix and clay sheets, these nanocomposites can be classified into: intercalated, flocculated and exfoliated nanocomposites. In this work, the morphology of the nanocomposite was studied using X-ray diffraction (XRD) and nanoscaning electron microscopy (NSEM). XRD and NSEM measurements confirmed the intercalation between poly(vinyl alcohol) chains and cloisite®20A sheets. Because of the intercalation between the clay platelets and the PVA chains, as the clay concentration increases as the band intensities in FT-IR spectra increase. On the other hand, the XRD did not provide clear shift of any of the clay peaks for PVA/cloisite® 10A nanocomposites and confirm the non-intercalation between PVA matrix and cloisite®10A platelets. The relative intercalation (RI) of PVA/Cloisite®20A nanocomposites declined with increase in the clay loadings. In contrast, for PVA/Cloisite®10A, RI values slightly increased with increasing the clay loading.展开更多
Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite l...Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.展开更多
The present study is an investigation of the properties of poly(vinyl alcohol),which would be a better contact lens mate- rial than conventional HEMA in some ways.A transparent PVA hydrogel was prepared from a PVA sol...The present study is an investigation of the properties of poly(vinyl alcohol),which would be a better contact lens mate- rial than conventional HEMA in some ways.A transparent PVA hydrogel was prepared from a PVA solution in a mixed solvent consisting of water and a water-miscible organic solvent,DMSO,by the freezing-thawing method.The water content,visible light transmittance,mechanical and swelling properties of the hydrogels were evaluated as a function of PVA concentration and number of freeze-thaw cycles.The results show that the properties of PVA hydrogels depend on the polymer concentration,the number of freeze-thaw cycles and the addition of the organic solvent.展开更多
Chemical and physical properties of poly(vinyl alcohol) (PVA) hydrogel films were investigated as a function of production factors. The experimental results show that the gel fraction depends strongly on the radiation...Chemical and physical properties of poly(vinyl alcohol) (PVA) hydrogel films were investigated as a function of production factors. The experimental results show that the gel fraction depends strongly on the radiation dose, the degree of swelling is inversely dependent on the concentration of PVA solution, the tensile strength depends mainly on the PVA blending ratio and the elongation at break is inversely dependent on the radiation dose.展开更多
In this study, nanostructured microparticles was developed with polycaprolactone (PCL), poly(vinyl alcohol) (PVAL) and nanoparticles of the commercial sodium clay NT-25®by using the spray drying technique. The...In this study, nanostructured microparticles was developed with polycaprolactone (PCL), poly(vinyl alcohol) (PVAL) and nanoparticles of the commercial sodium clay NT-25®by using the spray drying technique. The systems obtained were characterized by Nuclear Magnetic Resonance (NMR), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Dynamic Laser Light Scattering (DLS) and Differential Scanning Calorimetry (DSC). The NMR <sup>13</sup>C and FTIR techniques showed that both polymers were present in the microparticles and the DSC analysis revealed a small variation in the glass transition temperature of the PCL. The XRD and SEM analyses showed that the microparticles produced were amorphous and had a concave morphology. The NT-25 nanoload reduced the microparticles’ size due to the multiple interactions formed in the hybrid nanocomposite material. Therefore, it was possible to develop microparticles by using biodegradable and biocompatible polymers, with different polarities, allowing the incorporation of hydrophilic and hydrophobic materials and enabling the inclusion of otherwise incompatible materials in the same system.展开更多
文摘The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.
文摘Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.
基金Project supported by the National Natural Science Foundation of China(Grant No.12274356)the Fundamental Research Funds for the Central Universities(Grant No.20720220022)the 111 Project(Grant No.B16029)。
文摘Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits their practical applications.Herein,we present a Hofmeister effect-aided facile strategy to prepare high-performance poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels.Layered montmorillonite nanosheets can not only serve as crosslinking agents to enhance the mechanical properties of the hydrogel but also promote the ion conduction.More importantly,based on the Hofmeister effect,the presence of(NH_(4))_(2)SO_(4)can endow nanocomposite hydrogels with excellent mechanical properties by affecting PVA chains'aggregation state and crystallinity.As a result,the as-prepared nanocomposite hydrogels possess unique physical properties,including robust mechanical and electrical properties.The as-prepared hydrogels can be further assembled into a high-performance flexible sensor,which can sensitively detect large-scale and small-scale human activities.The simple design concept of this work is believed to provide a new prospect for developing robust nanocomposite hydrogels and flexible devices in the future.
基金Supported by the National Natural Science Foundation of China (No. 29976033) and the State Key Basic Science Research Project (G20000264).
文摘Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embedded are stable in the PVA matrix when the membrane is immerged in water or methanol solution atroom temperature. Conductivity of the composite membranes scatters around 10-3 S.cm-1 at room temperature.The methanol crossover through the membranes is about an order of magnitude lower than that through Nafion117 membrane.
文摘Hydrogels composed of poly(vinyl alcohol)(PVA) and poly(ethylene glycol)(PEG) were synthesized using glutaraldehyde as crosslinker and investigated for controlled delivery of the common anti-inflammatory drug, ibuprofen(IBF). To regulate the drug delivery, solid inclusion complexes(ICs) of IBF in β–cyclodextrin(β–CD) were prepared and added to the hydrogels. The ICs were prepared by the microwave irradiation method, which is more environmentally benign. The formation of IC was confirmed by various analytical techniques and the synthesized hydrogels were also characterized. Controlled release of drug was achieved from the hydrogels containing the ICs in comparison to the rapid release from hydrogels containing free IBF.The preliminary kinetic analysis emphasized the crucial role of β–CD in the drug release process that influences the polymer relaxation, thereby leading to prolonged release. The cytotoxicity assay validated the hydrogels as non-toxic in nature and hence can be utilized for controlled delivery of IBF.
基金Funded by the National Natural Science Foundation of China(Nos.21076199,51373158)
文摘The blend films with gelatin and poly（vinyl alcohol） （PVA） were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-transform infrared spectroscopy （FTIR）, x-ray diffraction （XRD）, thermogravimetry analysis （TG）, and differential scanning calorimetry （DSC） were employed to characterize the resultant blend films. According to optic result, the opacity of the blend film at the ratio of 20/80 （w/w, Gel to PVA） was the lowest, indicating the best compatibility between Gel and PVA at the ratio. The results oflR, XRD, DSC, and TG revealed an intensive interaction and good compatibility between them in the blend film at the ratio. The mechanical properties and solubility showed that PVA content in the blend films obviously affected the elongation at break and solubility. The mechanical properties and water resistance of gelatin film may be improved by the introduetion of PVA.
文摘Poly(hydroxybutyrate)/poly(vinyl alcohol)(PHB/PVA)blends plasticized with glycerol were prepared by melt blending of PHB and glycerol plasticized PVA.The PHB/PVA-glycerol compositions were 90:10,75:25 and 50:50 w/w,being the concentration of glycerol in the PVA mixture of 10 wt%.The blends were characterized by infrared spectroscopy,dynamic-mechanical thermal analysis,and scanning electron microscope of the fragile fractured surface.The results showed one single phase blend,indicating miscibility corroborated by the presence of a single glass transition temperature.The blending method proved to be an efficient way to tune PHB properties keeping its biodegradable nature since both PVA and glycerol are fully biodegradable materials.
基金supported by the Key Program of the National Natural Science Foundation of China (Grant No. 50535050)the National Natural Science Foundation of China (Grant No. 50875252)+1 种基金the Program for New Century Excellent Talents in University (Grant No. NCET-06-0479)the Natural Science Foundation of Jiangsu Province (Grant No. BK2008005)
文摘Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.The water loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests of PVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling properties with the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long time immersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HA composite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel in the calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and its equilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the network structure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content. Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium are obtained when the HA content is 3% and the number of freezing-thawing cycles is 7.
基金the support of the European Union through the European Regional Development Funds(ERDF)The Spanish Ministry of Economy,Industry and Competitiveness,is thanked for the research project POLYDECARBOCELL(ENE2017-86711-C3-1-R)The Spanish Ministry of Education,Culture and Sports is thanked for the FPU grant for O.Gil-Castell(FPU13/01916)。
文摘Crosslinked poly(vinyl alcohol)(PVA)based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells(DEFC).The membranes were functionalised by means of the addition of graphene oxide(GO)and sulfonated graphene oxide(SGO)and crosslinked with sulfosuccinic acid(SSA).The chemical structure was corroborated and suitable thermal properties were found.Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes,a significant reduction of the ethanol solution swelling and crossover was encountered,more relevant for those functionalised with SGO.In general,the composite membranes were stable under simulated service conditions.The addition of GO and SGO particles permitted to buffer the loss and almost retain similar proton conductivity than prior to immersion.These membranes are alternative polyelectrolytes,which overcome current concerns of actual commercial membranes such as the high cost or the crossover phenomenon.
文摘Polymers and polymeric composites have steadily reflected their importance in our daily life. Blending poly(vinyl alcohol) (PVA) with a potentially useful natural biopolymers such as hydroxypropyl cellulose (HPC) seems to be an interesting way of preparing a polymeric blends. In the present work, blends of PVA/HPC of compositions (100/0, 90/10, 75/25, 50/50, 25/75, and 0/100 wt/wt%) were prepared to be used as bioequivalent materials. Thermal analyses [differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)], and X-ray diffraction (XRD) were employed to characterize and reveal the miscibility map and the structural properties of such blend system. The obtained results of the thermal analyses showed variations in the glass transition temperature (Tg) indicating the miscibility of the blend systems. Moreover, the changes in the melting temperature (Tm), shape and area were attributed to the different degrees of crystallinity and the existence of polymer-polymer interactions between PVA and HPC molecules. The X-ray diffraction (XRD) analysis showed broadening and sharpening of peaks at different HPC concentrations with PVA. This indicated changes in the crystallinity/amorphosity ratio, and also suggested that the miscibility between the amorphous components of homo-polymers PVA and HPC is possible. The results showed that HPC doped in PVA film can improve the thermal stability of the film under investigation, leading to interesting technological applications.
文摘The physically crosslinked poly（vinyl alcohol）/chitosan （CS） composite hydrogels were prepared by cyclic freezing/thawing techniques, and the microstructure and swelling behavior of the hydrogels in the simulated gastric （pH 1.0） and intestinal （pH 7.4） media were investigated. The experimental results of infrared spectra （IR）, scanning electron microscope （SEM） and differential scanning calorimetry （DSC） demonstrated that poly（vinyl alcohol） and chitosan had good miscibility in the composite hydrogels, and the addition of chitosan perturbed the formation of poly（vinyl alcohol） crystallites. The swelling kinetics results indicated that the composite hydrogels had good pH sensitive properties to the acidic environments, and with the increase of chitosan content in the blend, the maximum swelling degreed and the swelling rate both increased, but it led to more dissolution at pH 1.0. And the composite hydrogels also exhibited good reversible swelling behavior with pH value of the swelling medium altering between 1.0 and 7.4. In addition, the higher freezing/thawing cycle times resulted in the lower swelling rate. Therefore, the swelling behavior of the composite hydrogels could be adjusted by changing the chitosan contents and the freezing/thawing cycle times.
文摘Chloro ethane dimethyl sulfoxide,C_2H_5Cl·DMSO(ECI·DMSO)was prepared by interaction of acrylic acid with conc.Hydrochloric acid in dimethyl sulfoxide(DMSO)and subsequent decarboxylation with H_2O_2 solution.The formation of the compound was confirmed by spectral and analytical methods;the molecular weight was determined by cryoscopic method.The solubility of poly(vinyl alcohol)(PVA)in different solvents or mixed solvents at 40℃,50℃and 60℃temperature in the presence of 0.01% of EC1·-DMSO was determined.It tu...
文摘The emulsion polymerization of highly shear-stable copolymer dispersions of methyl methacrylate and butyl acrylate were carried out using poly （vinyl alcohol） with a thiol end group （PVA-SH） as protective colloid. The dispersions can be transformed into corresponding redispersible powder via a spray dryingcooling process. On-line FT-IR monitoring shows that grafting polymer of PVA-g-PMMA was formed mainly at the stage-1 of the emulsion polymerization. TEM images show, the PVA-SH shell was fragmentary when adding SDS at initial stage and integrated when adding at particle growing or final stage. The particle size turns to be smaller when delayed adding SDS surfactant. Triethanolamine, a co-regulator of PVA-SH, controlled the M to 50 000-70 000 and reduced the PDI to 1.5-1.7. The acrylic dispersions with 0.8wt%-1.5wt% PVA-SH1 can be spray-dried into super dispersible polymer powder （SDPP）, which can easily disperse in water and form recon- stituted dispersions with an average particle size smaller than 1 micron.
文摘Adsorptive enhancements of several water-soluble polymers on copper(Ⅱ) were studied by adsorptive stripping voltammetry with a hanging mercury drop electrode. Increases in peak current of cu(Ⅱ) were observed in alkaline carbonate media. The enhancing power of poly(vinyl alcohol), starch and polyallylamine is 15, 4. 1, and 2.5 times, repectively
文摘Electrospun poly(vinyl alcohol)/chitosan nanofibers had their solution and process parameters optimized using a Box-Behnken design and desirability function. Four factors (applied voltage, flow rate, distance tip-to-plate and amount of chitosan) were varied to produce electrospun mats with a low fiber diameter. An empirical model was developed for each response using response surface methodology (RSM), which revealed that flow rate had no significant influence on the assessed responses. With desirability function, the optimal conditions to produce the nanofibers were applied voltage of 13.1 kV, 30% chitosan concentration and distance tip-to-plate of 10 cm. The fiber diameter and standard deviation were 196.5 ± 28.3 nm, compared to the predicted values of 185.9 ± 26.8 nm. The desirability function allied with Box-Benhken design proved themselves important tools to predict process parameters for the development of nanofibers. The mats were crosslinked with glutaraldehyde for 24 h and 48 h and presented good water stability and enhanced mechanical properties.
文摘Polymer clay nanocomposites (PCN) materials are industrially applied because of their unique properties. However many of their physical and chemical properties have not been determined. The formed structures of polymer/clay nanocomposite depend on the nature of interactions between polymer chains and clay platelets. According to the possible modes of interactions between polymer matrix and clay sheets, these nanocomposites can be classified into: intercalated, flocculated and exfoliated nanocomposites. In this work, the morphology of the nanocomposite was studied using X-ray diffraction (XRD) and nanoscaning electron microscopy (NSEM). XRD and NSEM measurements confirmed the intercalation between poly(vinyl alcohol) chains and cloisite®20A sheets. Because of the intercalation between the clay platelets and the PVA chains, as the clay concentration increases as the band intensities in FT-IR spectra increase. On the other hand, the XRD did not provide clear shift of any of the clay peaks for PVA/cloisite® 10A nanocomposites and confirm the non-intercalation between PVA matrix and cloisite®10A platelets. The relative intercalation (RI) of PVA/Cloisite®20A nanocomposites declined with increase in the clay loadings. In contrast, for PVA/Cloisite®10A, RI values slightly increased with increasing the clay loading.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(no.2022R1A2C1006743)。
文摘Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.
基金Projects 50575106 supported by the National Natural Science Foundation of ChinaBG2007046 by the High Technology Project of Jiangsu Province
文摘The present study is an investigation of the properties of poly(vinyl alcohol),which would be a better contact lens mate- rial than conventional HEMA in some ways.A transparent PVA hydrogel was prepared from a PVA solution in a mixed solvent consisting of water and a water-miscible organic solvent,DMSO,by the freezing-thawing method.The water content,visible light transmittance,mechanical and swelling properties of the hydrogels were evaluated as a function of PVA concentration and number of freeze-thaw cycles.The results show that the properties of PVA hydrogels depend on the polymer concentration,the number of freeze-thaw cycles and the addition of the organic solvent.
基金the Funds of Scientic Researches of Chinese Nuclear Industry
文摘Chemical and physical properties of poly(vinyl alcohol) (PVA) hydrogel films were investigated as a function of production factors. The experimental results show that the gel fraction depends strongly on the radiation dose, the degree of swelling is inversely dependent on the concentration of PVA solution, the tensile strength depends mainly on the PVA blending ratio and the elongation at break is inversely dependent on the radiation dose.
文摘In this study, nanostructured microparticles was developed with polycaprolactone (PCL), poly(vinyl alcohol) (PVAL) and nanoparticles of the commercial sodium clay NT-25®by using the spray drying technique. The systems obtained were characterized by Nuclear Magnetic Resonance (NMR), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Dynamic Laser Light Scattering (DLS) and Differential Scanning Calorimetry (DSC). The NMR <sup>13</sup>C and FTIR techniques showed that both polymers were present in the microparticles and the DSC analysis revealed a small variation in the glass transition temperature of the PCL. The XRD and SEM analyses showed that the microparticles produced were amorphous and had a concave morphology. The NT-25 nanoload reduced the microparticles’ size due to the multiple interactions formed in the hybrid nanocomposite material. Therefore, it was possible to develop microparticles by using biodegradable and biocompatible polymers, with different polarities, allowing the incorporation of hydrophilic and hydrophobic materials and enabling the inclusion of otherwise incompatible materials in the same system.
