Substrates or encapsulants in soft and stretchable formats are key components for transient,bioresorbable electronic systems;however,elastomeric polymers with desired mechanical and biochemical properties are very lim...Substrates or encapsulants in soft and stretchable formats are key components for transient,bioresorbable electronic systems;however,elastomeric polymers with desired mechanical and biochemical properties are very limited compared to nontransient counterparts.Here,we introduce a bioresorbable elastomer,poly(glycolide-co-ε-caprolactone)(PGCL),that contains excellent material properties including high elongation-at-break(<1300%),resilience and toughness,and tunable dissolution behaviors.Exploitation of PGCLs as polymer matrices,in combination with conducing polymers,yields stretchable,conductive composites for degradable interconnects,sensors,and actuators,which can reliably function under external strains.Integration of device components with wireless modules demonstrates elastic,transient electronic suture system with on-demand drug delivery for rapid recovery of postsurgical wounds in soft,time-dynamic tissues.展开更多
ABSTRACT Rationally designing broad-spectrum photocatalysts to harvest whole visible-light region photons and enhance solar energy conversion is a“holy grail”for researchers,but is still a challenging issue.Herein,b...ABSTRACT Rationally designing broad-spectrum photocatalysts to harvest whole visible-light region photons and enhance solar energy conversion is a“holy grail”for researchers,but is still a challenging issue.Herein,based on the common polymeric carbon nitride(PCN),a hybrid co-catalysts system comprising plasmonic Au nanoparticles(NPs)and atomically dispersed Pt single atoms(PtSAs)with different functions was constructed to address this challenge.For the dual co-catalysts decorated PCN(PtSAs–Au_(2.5)/PCN),the PCN is photoexcited to generate electrons under UV and short-wavelength visible light,and the synergetic Au NPs and PtSAs not only accelerate charge separation and transfer though Schottky junctions and metal-support bond but also act as the co-catalysts for H_(2) evolution.Furthermore,the Au NPs absorb long-wavelength visible light owing to its localized surface plasmon resonance,and the adjacent PtSAs trap the plasmonic hot-electrons for H_(2) evolution via direct electron transfer effect.Consequently,the PtSAs–Au_(2.5)/PCN exhibits excellent broad-spectrum photocatalytic H_(2) evolution activity with the H_(2) evolution rate of 8.8 mmol g^(−1) h^(−1) at 420 nm and 264μmol g^(−1) h^(−1) at 550 nm,much higher than that of Au_(2.5)/PCN and PtSAs–PCN,respectively.This work provides a new strategy to design broad-spectrum photocatalysts for energy conversion reaction.展开更多
Amorphous solid dispersion(ASD)is one of the most effective approaches for delivering poorly soluble drugs.In ASDs,polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level.To p...Amorphous solid dispersion(ASD)is one of the most effective approaches for delivering poorly soluble drugs.In ASDs,polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level.To prepare the solid dispersions,there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations.Polymer selection is of great importance because it influences the stability,solubility and dissolution rates,manufacturing process,and bioavailability of the ASD.This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers,formulation designs and preparation methods.Furthermore,considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.展开更多
Polymeric materials with excellent performance are the foundation for developing high-level technology and advanced manufacturing.Polymeric material genome engineering(PMGE)is becoming a vital platform for the intelli...Polymeric materials with excellent performance are the foundation for developing high-level technology and advanced manufacturing.Polymeric material genome engineering(PMGE)is becoming a vital platform for the intelligent manufacturing of polymeric materials.However,the development of PMGE is still in its infancy,and many issues remain to be addressed.In this perspective,we elaborate on the PMGE concepts,summarize the state-of-the-art research and achievements,and highlight the challenges and prospects in this field.In particular,we focus on property estimation approaches,including property proxy prediction and machine learning prediction of polymer properties.The potential engineering applications of PMGE are discussed,including the fields of advanced composites,polymeric materials for communications,and integrated circuits.展开更多
Cancer-associated fibroblasts(CAFs)are one of the most abundant stromal cells in the tumor microenvironment which mediate desmoplastic response and are the primary driver for an immunosuppressive microenvironment,lead...Cancer-associated fibroblasts(CAFs)are one of the most abundant stromal cells in the tumor microenvironment which mediate desmoplastic response and are the primary driver for an immunosuppressive microenvironment,leading to the failure of triple-negative breast cancer(TNBC)immunotherapy.Therefore,depleting CAFs may enhance the effect of immunotherapy(such as PD-L1 antibody).Relaxin(RLN)has been demonstrated to significantly improve transforming growth factor-β(TGF-β)induced CAFs activation and tumor immunosuppressive microenvironment.However,the short half-life and systemic vasodilation of RLN limit its in vivo efficacy.Here,plasmid encoding relaxin(pRLN)to locally express RLN was delivered with a new positively charged polymer named polymeric metformin(PolyMet),which could increase gene transfer efficiency significantly and have low toxicity that have been certified by our lab before.In order to improve the stability of pRLN in vivo,this complex was further formed lipid poly-γ-glutamic acid(PGA)/PolyMetpRLN nanoparticle(LPPR).The particle size of LPPR was 205.5±2.9 nm,and the zeta potential was+55.4±1.6 mV.LPPR displayed excellent tumor penetrating efficacy and weaken proliferation of CAFs in 4T1luc/CAFs tumor spheres in vitro.In vivo,it could reverse aberrantly activated CAFs by decreasing the expression of profibrogenic cytokine and remove the physical barrier to reshape the tumor stromal microenvironment,which enabled a 2.2-fold increase in cytotoxic T cell infiltration within the tumor and a decrease in immunosuppressive cells infiltration.Thus,LPPR was observed retarded tumor growth by itself in the 4T1 tumor bearing-mouse,and the reshaped immune microenvironment further led to facilitate antitumor effect when it combined with PD-L1 antibody(aPD-L1).Altogether,this study presented a novel therapeutic approach against tumor stroma using LPPR to achieve a combination regimen with immune checkpoint blockade therapy against the desmoplastic TNBC model.展开更多
Using allelochemicals to suppress cyanobacteria growth is a prospective method for its high efficiency and ecological safety.However,the suppression efficiency is affected inevitably by the extracellular polymeric sub...Using allelochemicals to suppress cyanobacteria growth is a prospective method for its high efficiency and ecological safety.However,the suppression efficiency is affected inevitably by the extracellular polymeric substances(EPS)produced by cyanobacteria,and the knowledge about the roles of EPS in resistance to allelochemical stress is scarce.For the study,two typical anti-cyanobacterial allelochemicals were adopted to investigate the role of EPS in resistance to allelochemical stress on Microcystis aeruginosa.Results show that EPS was crucial in alleviating the toxicity of allelochemicals to algae,especially in stabilizing the metabolism and photosynthetic activity of algal cells.The aggregation rate of algal cells increased with the increase of EPS secretion,which alleviated the stress of allelopathy.Tryptophan proteins and humic acids in EPS provided a binding site for allelochemicals,and the EPS-allelochemicals complex were formed by chemical bonding.This study improved our comprehension of the role of EPS in algal inhibition by allelochemicals.展开更多
Dolichospermum,a typical model filamentous of cyanobacteria,has the potential to cause severely bloom.Extracellular polymeric substances(EPSs)are considered to influence the aggregation of the algae,and temperature is...Dolichospermum,a typical model filamentous of cyanobacteria,has the potential to cause severely bloom.Extracellular polymeric substances(EPSs)are considered to influence the aggregation of the algae,and temperature is a significant factor affecting EPSs secretion.However,the mechanism of how EPSs affects the aggregation of Dolichospermum is still unclear because the structure and composition of EPSs are complex.In this study,the effects of EPSs on the aggregation of Dolichospermum during the rise of temperature(7-37℃)were determined.The results showed that the concentration of extracellular polysaccharides and proteins changed significantly with increasing temperature(P<0.01).Firstly,during the increasing temperature,the polysaccharide content of EPSs increased from 20.34 to 54.64 mg/L,and the polysaccharides in the soluble EPS(S-EPS)layer changed significantly.The protein content reached maximum value at 21℃(14.52 mg/L)and varied significantly in S-EPS and loosely bound EPS(LB-EPS).In the EPSs matrix,humus substances and protein were main components of S-EPS and LB-EPS,and protein was the main component of tightly bound EPS(TB-EPS).Secondly,the cell density of Dolichospermum increased during the temperature rise while the aggregation ratio decreased.Moreover,zeta potential and surface thermodynamic analysis of Dolichospermum revealed that the interfacial free energy and electrostatic repulsion increased gradually with increasing temperature,which further reduced the aggregation of Dolichospermum.Finally,principal component analysis(PCA)analysis showed the aggregation of Dolichospermum was directly related to the changes of protein in EPSs(especially S-EPS and LB-EPS)and zeta potential,and polysaccharides in EPSs inhibited the aggregation of Dolichospermum.Based on these results,it was illustrated that the composition and concentration of EPSs affected the cell surface properties of Dolichospermum with the change of temperature and thus affected the aggregation of Dolichospermum.展开更多
To reduce mucosal damage in the gastrointestinal tract caused by aspirin,we developed a dissolvable polymeric microneedle(MN)patch loaded with aspirin.Biodegradable polymers provide mechanical strength to the MNs.The ...To reduce mucosal damage in the gastrointestinal tract caused by aspirin,we developed a dissolvable polymeric microneedle(MN)patch loaded with aspirin.Biodegradable polymers provide mechanical strength to the MNs.The MN tips punctured the cuticle of the skin and dissolved when in contact with the subcutaneous tissue.The aspirin in the MN patch is delivered continuously through an array of micropores created by the punctures,providing a stable plasma concentration of aspirin.The factors affecting the stability of aspirin during MNs fabrication were comprehensively analyzed,and the hydrolysis rate of aspirin in the MNs was less than 2%.Compared to oral administration,MN administration not only had a smoother plasma concentration curve but also resulted in a lower effective dose of antiplatelet aggregation.Aspirin-loaded MNs were mildly irritating to the skin,causing only slight erythema on the skin and recovery within 24 h.In summary,aspirin-loaded MNs provide a new method to reduce gastrointestinal adverse effects in patients requiring aspirin regularly.展开更多
Solid-state lithium(Li) metal batteries overwhelm the lithium-ion batteries by harvesting high energy from Li metal anode with ultrahigh capacities and gaining excellent safety from solid electrolytes.However,the unco...Solid-state lithium(Li) metal batteries overwhelm the lithium-ion batteries by harvesting high energy from Li metal anode with ultrahigh capacities and gaining excellent safety from solid electrolytes.However,the uncontrollable solvents in solid electrolytes usually aggravate poor interfacial contact with lithium metal anode and deteriorate Li^(+) pathways.Here a copolymeric network-structured ion conductor by rationally integrating cellulose nanofibril as a two-in-one functional material is employed to anchor the solvent.Taking advantages of tightly anchoring of cellulose nanofibril to solvent,the asconstructed quasi-solid polymer-based electrolyte offers rapid Li^(+) transport channels and realizes effective Li-dendrite suppression,which enables high ionic conductivity of 1.93 × 10^(-3)S cm^(-1) at room temperature,long-term Li plating/stripping over 1900 h,and high capacity retention of 99%.This work provides a fresh strategy for creating solid electrolytes that meet both high ionic conductivity and interfacial stability requirements for practical solid-state lithium metal battery.展开更多
An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of c...An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of carbon atoms in the amide group at 166 ppm, which was demonstrated by the solid nuclear magnetic resonance carbon spectrum. It was shown to be the stretching vibration absorption peak of the amide N-H bond at 3342 cm<sup>−1</sup> by Fourier infrared (FT-IR) spectroscopy. It was obtained that the energy band near 1100 - 1276 cm<sup>−1</sup> belongs to the absorption peak of the para-substituted benzene ring and the band near 2977 cm<sup>−1</sup> was the C-H stretching vibration peak of the benzene ring by Raman spectroscopy. The molecular structure of the synthesized polyamide compound was confirmed by FT-IR, Raman, and solid <sup>13</sup>C-NMR spectroscopies. It was proved that the polymer is stable up to 300˚C and has a relatively high stability by the thermogravimetric analysis. It was also confirmed by the fluorescence spectrum that it has a strong blue fluorescence near 420 nm. The morphological characteristics of the polymer were further demonstrated by electron scanning electron microscopy (SEM). The properties of polymeric p-benzoyl-4,4'-diaminobenzoyl-aniline were found to emit strong blue fluorescence and have good thermal stability, making it a promising functional material for fluorescence in the blue region with potential for large-scale applications.展开更多
In view of the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them, there is a need to investiga...In view of the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them, there is a need to investigate modern trends in ground improvement techniques in order to determine their reliability. This study is thus aimed at using the reliability based approach to analyze the use of polyvinyl alcohol (PVA) in combination with 1,2,3,4 Butane-tetracarboxylic acid (BTCA) for ground improvement. This study is necessary given the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them. Simplex lattice design was employed to build the design of experiment before experimental investigations were carried out on the PVA-BTCA treated soft soils. Reliability indices were computed on the basis of the 28<sup>th</sup> day unconfined compressive strength (UCS) of the treated soil. Reliability index models were developed using the Scheffe’s technique and optimized using excel solver. From analysis of results, reliability model developed proved adequate at 5% level of significance. PVA-BTCA combination provided a potential reliability or probability of success of 99.936% at components combination of: 98.4256% for soil, 1.2352% for PVA, 0.3392% for BTCA and 15.9934% for water. It was therefore recommended that financial implications of using PVA-BTCA for stabilization be compared to those of conventional methods, in order to compare their performance-cost ratio.展开更多
An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of c...An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of carbon atoms in the amide group at 166 ppm, which was demonstrated by the solid nuclear magnetic resonance carbon spectrum. It was shown to be the stretching vibration absorption peak of the amide N-H bond at 3342 cm<sup>−1</sup> by Fourier infrared (FT-IR) spectroscopy. It was obtained that the energy band near 1100 - 1276 cm<sup>−1</sup> belongs to the absorption peak of the para-substituted benzene ring and the band near 2977 cm<sup>−1</sup> was the C-H stretching vibration peak of the benzene ring by Raman spectroscopy. The molecular structure of the synthesized polyamide compound was confirmed by FT-IR, Raman, and solid <sup>13</sup>C-NMR spectroscopies. It was proved that the polymer is stable up to 300˚C and has a relatively high stability by the thermogravimetric analysis. It was also confirmed by the fluorescence spectrum that it has a strong blue fluorescence near 420 nm. The morphological characteristics of the polymer were further demonstrated by electron scanning electron microscopy (SEM). The properties of polymeric p-benzoyl-4,4'-diaminobenzoyl-aniline were found to emit strong blue fluorescence and have good thermal stability, making it a promising functional material for fluorescence in the blue region with potential for large-scale applications.展开更多
Sodium-ion batteries(SIBs)have attracted considerable interest as an alternative to lithium-ion batteries owing to their similar electrochemical performance and superior long-term cycle stability.Organic materials are...Sodium-ion batteries(SIBs)have attracted considerable interest as an alternative to lithium-ion batteries owing to their similar electrochemical performance and superior long-term cycle stability.Organic materials are regarded as promising anode materials for constructing SIBs with high capacity and good retention.However,utilization of organic materials is rather limited by their low energy density and poor stability at high current densities.To overcome these limitations,we utilized a novel polymeric disodium phthalocyanines(pNaPc)as SIB anodes to provide stable coordination sites for Na ions as well as to enhance the stability at high current density.By varying the linker type during a one-pot cyclization and polymerization process,two pNaPc anodes with O-(O-pNaPc)and S-linkers(S-pNaPc)were prepared,and their structural and electrochemical properties were investigated.The O-pNaPc binds Na ions with a lower binding energy compared with S-pNaPc,which leads to more facile Na-ion coordination/dissociation when engaged as SIB anode.The use of O-pNaPc significantly improves the redox kinetics and cycle stability and allows the fabrication of a full cell against Na_(3)V_(2)(PO_(4))_(2)F_(3)/C cathode,which demonstrates its practical application with high energy density(288 Wh kg^(-1))and high power density(149 W kg^(-1)).展开更多
Most of the conventional chemotherapeutic agents used for cancer chemotherapy suffer from multidrug resistance of tumor cells and poor antitumor efficacy.Based on physiological differences between the normal tissue an...Most of the conventional chemotherapeutic agents used for cancer chemotherapy suffer from multidrug resistance of tumor cells and poor antitumor efficacy.Based on physiological differences between the normal tissue and the tumor tissue,one effective approach to improve the efficacy of cancer chemotherapy is to develop pH-sensitive polymeric micellar delivery systems.The copolymers with reversible protonationedeprotonation core units or acid-liable bonds between the therapeutic agents and the micelle-forming copolymers can be used to form pH-sensitive polymeric micelles for extracellular and intracellular drug smart release.These systems can be triggered to release drug in response to the slightly acidic extracellular fluids of tumor tissue after accumulation in tumor tissues via the enhanced permeability and retention effect,or they can be triggered to release drug in endosomes or lysosomes by pH-controlled micelle hydrolysis or dissociation after uptake by cells via the endocytic pathway.The pH-sensitive micelles have been proved the specific tumor cell targeting,enhanced cellular internalization,rapid drug release,and multidrug resistance reversal.The multifunctional polymeric micelles combining extracellular pH-sensitivity with receptor-mediated active targeting strategies are of great interest for enhanced tumor targeting.The micelles with receptor-mediated and intracellular pH targeting functions are internalized via receptor-mediated endocytosis followed by endosomal-pH triggered drug release inside the cells,which reverses multidrug resistance.The pH sensitivity strategy of the polymeric micelles facilitates the specific drug delivery with reduced systemic side effects and improved chemotherapeutical efficacy,and is a novel promising platform for tumor-targeting drug delivery.展开更多
The effects of the colorimetric buffer solutions were investigated while the two colorimetric reactions of A1 ferron complex and Fe ferron complex occurred individually, and the effects of the testing wavelength and t...The effects of the colorimetric buffer solutions were investigated while the two colorimetric reactions of A1 ferron complex and Fe ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexation colorimetric analysis method of A1 Fe ferron in view of the total concentration of ｛A1+Fe｝ was then established to determine the species distribution of polymeric Al Fe. The testing wavelength was recommended at 362 nm and the testing pH value was 5. With a comparison of the ratios of n Al / n Fe , the standard adsorption curves of the polymeric Al Fe solutions were derived from the experimental results. Furthermore, the solutions’composition were various in both the molar n Al / n Fe ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total [A1+Fe] which ranged from 10 -5 to 10 -4 mol/L.展开更多
To achieve targeted thrombolysis, a targeted delivery system of lumbrokinase(LK) was constructed using RGDfk-conjugated hybrid micelles. Based on the specific affinity of RGDfk to glycoprotein complex of GP Ⅱ b/Ⅲ a ...To achieve targeted thrombolysis, a targeted delivery system of lumbrokinase(LK) was constructed using RGDfk-conjugated hybrid micelles. Based on the specific affinity of RGDfk to glycoprotein complex of GP Ⅱ b/Ⅲ a expressed on the surface of membrane of activated platelet, LK loaded targeted micelles(LKTM) can be delivered to thrombus. The hybrid micelles were composed of polycaprolactone-block-poly(2-(dimethylamino) ethyl methacrylate)(PCL-PDMAEMA), methoxy polyethylene glycol-block-polycaprolactone(mPEG-PCL)and RGDfk conjugated polycaprolactone-block-polyethylene glycol(PCL-PEG-RGDfk). PCLPDMAEMA was synthesized via ring open polymerization(ROP) and atom transfer radical polymerization(ATRP). PCL-PEG-RGDfk was synthesized via ROP and carbodiimide chemistry. The prepared LKTM was characterized by dynamic light scattering(DLS) and transmission electron microscope(TEM). Colloidal stability assay showed the prepared LKTM was stable. Biocompatibility assay was performed to determine the safe concentration range of polymer. The assay of fluorescent distribution in vivo demonstrated that LKTM can be efficiently delivered to thrombi in vivo. Thrombolysis in vivo indicated the thrombolytic potency of LKTM was optimal in all groups. Notably, the laboratory mice treated with LKTM exhibited a significantly shorter tail bleeding time compared to those treated with LK or LK-loaded micelles without RGDfk, which suggested that the targeted delivery of LK using RGDfk-conjugated hybrid micelles effectively reduced the bleeding risk.展开更多
The characterization and enhanced oil recovery mechanisms of a nanosized polymeric cross-linked gel are presented herein.A negatively charged nanogel was synthesized using a typical free radical suspension polymerizat...The characterization and enhanced oil recovery mechanisms of a nanosized polymeric cross-linked gel are presented herein.A negatively charged nanogel was synthesized using a typical free radical suspension polymerization process by employing 2-acrylamido 2-methyl propane sulfonic acid monomer.The synthesized nanogel showed a narrow size distribution with one peak pointing to a predominant homogeneous droplet size.The charged nanogels were also able to adsorb at the oil-water interfaces to reduce interfacial tension and stabilize oil-in-water emulsions,which ultimately improved the recovered oil from hydrocarbon reservoirs.In addition,a fixed concentration of negatively charged surfactant(sodium dodecyl sulfate or SDS)was combined with different concentrations of the nanogel.The effect of the nanogels combined with surfactant on sandstone core plugs was examined by running a series of core flooding experiments using multiple flow patterns.The results show that combining nanogel and SDS was able to reduce the interfacial tension to a value of 6 Nm/m.The core flooding experiments suggest the ability of the nanogel,both alone and combined with SDS,to improve the oil recovery by a factor of 15%after initial seawater flooding.展开更多
Lithium–sulfur(Li–S)batteries are being explored as promising advanced energy storage systems due to their ultra-high energy density.However,fast capacity fading and low coulombic efficiency,resulting from the disso...Lithium–sulfur(Li–S)batteries are being explored as promising advanced energy storage systems due to their ultra-high energy density.However,fast capacity fading and low coulombic efficiency,resulting from the dissolution of polysulfides,remain a serious challenge.Compared to weak physical adsorptions or barriers,chemical confinement based on strong chemical interaction is a more effective approach to address the shuttle issue.Herein,we devise a novel polymeric sulfur/carbon nanotube composite for Li–S battery,for which 2,5-dithiobiurea is chosen as the stabilizer of long-chain sulfur.This offers chemical bonds which bridge the polymeric sulfur and carbon nanotubes.The obtained composite can deliver an ultra-high reversible capacity of 1076.2 m Ahg^-1(based on the entire composite)at the rate of 0.1 C with an exceptional initial Coulombic efficiency of 96.2%,as well as remarkable cycle performance.This performance is mainly attributed to the reaction reversibility of the obtained polymeric sulfur-based composite during the discharge/charge process.This was confirmed by density functional theory calculations for the first time.展开更多
Polymeric phosphate ferric sulfate (PPFS),a new improved coagulation reagent,was prepared by polymeric ferric sulfate (PFS),Na2HPO4 and NaOH. The degree of iron polymerisation (Fepol) of PPFS was determined by means o...Polymeric phosphate ferric sulfate (PPFS),a new improved coagulation reagent,was prepared by polymeric ferric sulfate (PFS),Na2HPO4 and NaOH. The degree of iron polymerisation (Fepol) of PPFS was determined by means of the ferron-timed spectroscopy method. Furthermore,the effect of n(P)/n(Fe),alkalization degree,pH value,and PPFS dosage on the removal rate of eutrophic water turbidity and chl-a and ζ-potential of products were also investigated. The experimental results show that the best n(P)/n(Fe) of flocculation effect in stable product of PFFS is 0.3; the best alkalization degree of flocculation effect is 0.2,while the n(P)/n(Fe) is 0.3. Under the neutral and subalkalic (pH value is 7-8) conditions,PPFS achieves the best processing efficiency. PPFS has more excellent turbidity and higher chlorophyl removal rate by studying treatment eutrophic water in comparison with PFS.展开更多
We synthesized one quaternary ammonium polymeric ionic liquids(PILs)P[VBTHEA]Cl and three imidazolium PILs of P[VEIm]Br, P[VEIm]BF_4, P[VEIm]PF_6 by free-radical polymerization in solution. These PILs were characteriz...We synthesized one quaternary ammonium polymeric ionic liquids(PILs)P[VBTHEA]Cl and three imidazolium PILs of P[VEIm]Br, P[VEIm]BF_4, P[VEIm]PF_6 by free-radical polymerization in solution. These PILs were characterized by FT-IR,~1 H-NMR,^(13)C-NMR, TGA, XRD and SEM. Their CO_2 adsorption capacities were measured under different pressures and temperatures by constant-volume technique. It was observed that quaternary ammonium PILs of P[VBTHEA]Cl have higher adsorption capacity for CO_2 than those imidazolium PILs, following P[VBTHEA]Cl > P[VEIm]PF_6> P[VEIm]BF_4> P[VEIm]Br, which may be ascribed to higher positive charge density on ammonium cation than that on imidazolium cation and thus stronger interaction with CO_2, consistent with the results from dual-mode adsorption model that ammonium PILs have much higher CO_2 bulk absorption than imidazolium PILs. CO_2 adsorption capacity of P[VBTHEA]Cl is 9.02 mg/g under 295 K and 1 bar, which is comparable to that of some other PILs, and is much higher than that of the corresponding ILs monomer. These PILs have good adsorption selectivity for CO_2 over N_2 and regeneration efficiency.展开更多
基金supported by the KIST Institutional Program (Project No.2E32501-23-106)the KU-KIST Graduate School of Converging Science and Technology Program+3 种基金the National Research Foundation of Korea (NRF) grant funded by the Korean government (the Ministry of Science, ICT, MSIT) (RS-2022-00165524)the development of technologies for electroceuticals of the National Research Foundataion (NRF) funded by the Korean government (MSIT) (RS-2023-00220534)the Ministry of Science and ICT (MSIT), Korea, under the ICT Creative Consilience program (IITP-2023-2020-0-01819) supervised by the IITP (Institute for Information and Communications Technology Planning and Evaluation)Start up Pioneering in Research and Innovation(SPRINT) through the Commercialization Promotion Agency for R&D Outcomes(COMPA) grant funded by the Korea government(Ministry of Science and ICT) (1711198921)
文摘Substrates or encapsulants in soft and stretchable formats are key components for transient,bioresorbable electronic systems;however,elastomeric polymers with desired mechanical and biochemical properties are very limited compared to nontransient counterparts.Here,we introduce a bioresorbable elastomer,poly(glycolide-co-ε-caprolactone)(PGCL),that contains excellent material properties including high elongation-at-break(<1300%),resilience and toughness,and tunable dissolution behaviors.Exploitation of PGCLs as polymer matrices,in combination with conducing polymers,yields stretchable,conductive composites for degradable interconnects,sensors,and actuators,which can reliably function under external strains.Integration of device components with wireless modules demonstrates elastic,transient electronic suture system with on-demand drug delivery for rapid recovery of postsurgical wounds in soft,time-dynamic tissues.
基金supported by the National Natural Science Foundation of China(Grant No.51871078 and 52071119)Interdisciplinary Research Foundation of HIT(Grant No.IR2021208)+1 种基金State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology)(No.2022TS38)Heilongjiang Science Foundation(No.LH2020B006).
文摘ABSTRACT Rationally designing broad-spectrum photocatalysts to harvest whole visible-light region photons and enhance solar energy conversion is a“holy grail”for researchers,but is still a challenging issue.Herein,based on the common polymeric carbon nitride(PCN),a hybrid co-catalysts system comprising plasmonic Au nanoparticles(NPs)and atomically dispersed Pt single atoms(PtSAs)with different functions was constructed to address this challenge.For the dual co-catalysts decorated PCN(PtSAs–Au_(2.5)/PCN),the PCN is photoexcited to generate electrons under UV and short-wavelength visible light,and the synergetic Au NPs and PtSAs not only accelerate charge separation and transfer though Schottky junctions and metal-support bond but also act as the co-catalysts for H_(2) evolution.Furthermore,the Au NPs absorb long-wavelength visible light owing to its localized surface plasmon resonance,and the adjacent PtSAs trap the plasmonic hot-electrons for H_(2) evolution via direct electron transfer effect.Consequently,the PtSAs–Au_(2.5)/PCN exhibits excellent broad-spectrum photocatalytic H_(2) evolution activity with the H_(2) evolution rate of 8.8 mmol g^(−1) h^(−1) at 420 nm and 264μmol g^(−1) h^(−1) at 550 nm,much higher than that of Au_(2.5)/PCN and PtSAs–PCN,respectively.This work provides a new strategy to design broad-spectrum photocatalysts for energy conversion reaction.
基金the National Natural Science Foundation of China(No.81872813,22108313,82273880)Natural Science Foundation of Jiangsu Province(No.BK 20200573,BK 20200576)+1 种基金Fundamental Research Funds for the Central Universities(No 2632022ZD16)the Scientific Research Fund of Hunan Provincial Education Department(No.22B0820).
文摘Amorphous solid dispersion(ASD)is one of the most effective approaches for delivering poorly soluble drugs.In ASDs,polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level.To prepare the solid dispersions,there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations.Polymer selection is of great importance because it influences the stability,solubility and dissolution rates,manufacturing process,and bioavailability of the ASD.This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers,formulation designs and preparation methods.Furthermore,considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.
基金supported by the National Natural Science Foundation of China(22103025,51833003,22173030,21975073,and 51621002).
文摘Polymeric materials with excellent performance are the foundation for developing high-level technology and advanced manufacturing.Polymeric material genome engineering(PMGE)is becoming a vital platform for the intelligent manufacturing of polymeric materials.However,the development of PMGE is still in its infancy,and many issues remain to be addressed.In this perspective,we elaborate on the PMGE concepts,summarize the state-of-the-art research and achievements,and highlight the challenges and prospects in this field.In particular,we focus on property estimation approaches,including property proxy prediction and machine learning prediction of polymer properties.The potential engineering applications of PMGE are discussed,including the fields of advanced composites,polymeric materials for communications,and integrated circuits.
基金This work was funded by the Medical and Health Science and Technology Program of Zhejiang Province(2021KY813)the National Natural Science Foundation of China(82174095)the National Natural Science Foundation of Zhejiang Province(LZ22H290001).
文摘Cancer-associated fibroblasts(CAFs)are one of the most abundant stromal cells in the tumor microenvironment which mediate desmoplastic response and are the primary driver for an immunosuppressive microenvironment,leading to the failure of triple-negative breast cancer(TNBC)immunotherapy.Therefore,depleting CAFs may enhance the effect of immunotherapy(such as PD-L1 antibody).Relaxin(RLN)has been demonstrated to significantly improve transforming growth factor-β(TGF-β)induced CAFs activation and tumor immunosuppressive microenvironment.However,the short half-life and systemic vasodilation of RLN limit its in vivo efficacy.Here,plasmid encoding relaxin(pRLN)to locally express RLN was delivered with a new positively charged polymer named polymeric metformin(PolyMet),which could increase gene transfer efficiency significantly and have low toxicity that have been certified by our lab before.In order to improve the stability of pRLN in vivo,this complex was further formed lipid poly-γ-glutamic acid(PGA)/PolyMetpRLN nanoparticle(LPPR).The particle size of LPPR was 205.5±2.9 nm,and the zeta potential was+55.4±1.6 mV.LPPR displayed excellent tumor penetrating efficacy and weaken proliferation of CAFs in 4T1luc/CAFs tumor spheres in vitro.In vivo,it could reverse aberrantly activated CAFs by decreasing the expression of profibrogenic cytokine and remove the physical barrier to reshape the tumor stromal microenvironment,which enabled a 2.2-fold increase in cytotoxic T cell infiltration within the tumor and a decrease in immunosuppressive cells infiltration.Thus,LPPR was observed retarded tumor growth by itself in the 4T1 tumor bearing-mouse,and the reshaped immune microenvironment further led to facilitate antitumor effect when it combined with PD-L1 antibody(aPD-L1).Altogether,this study presented a novel therapeutic approach against tumor stroma using LPPR to achieve a combination regimen with immune checkpoint blockade therapy against the desmoplastic TNBC model.
基金Supported by the National Natural Science Foundation of China(Nos.51979137,51779079,41931292)。
文摘Using allelochemicals to suppress cyanobacteria growth is a prospective method for its high efficiency and ecological safety.However,the suppression efficiency is affected inevitably by the extracellular polymeric substances(EPS)produced by cyanobacteria,and the knowledge about the roles of EPS in resistance to allelochemical stress is scarce.For the study,two typical anti-cyanobacterial allelochemicals were adopted to investigate the role of EPS in resistance to allelochemical stress on Microcystis aeruginosa.Results show that EPS was crucial in alleviating the toxicity of allelochemicals to algae,especially in stabilizing the metabolism and photosynthetic activity of algal cells.The aggregation rate of algal cells increased with the increase of EPS secretion,which alleviated the stress of allelopathy.Tryptophan proteins and humic acids in EPS provided a binding site for allelochemicals,and the EPS-allelochemicals complex were formed by chemical bonding.This study improved our comprehension of the role of EPS in algal inhibition by allelochemicals.
基金Supported by the National Natural Science Foundation of China(Nos.41877336,41907202,91951112,41773077)the China Postdoctoral Science Foundation(No.2019M651877)+2 种基金the Natural Science Foundation of Jiangsu Province(No.SBK2019043965)the Yancheng Fishery High Quality Development Project(No.YCSCYJ2021030)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX22_1581)。
文摘Dolichospermum,a typical model filamentous of cyanobacteria,has the potential to cause severely bloom.Extracellular polymeric substances(EPSs)are considered to influence the aggregation of the algae,and temperature is a significant factor affecting EPSs secretion.However,the mechanism of how EPSs affects the aggregation of Dolichospermum is still unclear because the structure and composition of EPSs are complex.In this study,the effects of EPSs on the aggregation of Dolichospermum during the rise of temperature(7-37℃)were determined.The results showed that the concentration of extracellular polysaccharides and proteins changed significantly with increasing temperature(P<0.01).Firstly,during the increasing temperature,the polysaccharide content of EPSs increased from 20.34 to 54.64 mg/L,and the polysaccharides in the soluble EPS(S-EPS)layer changed significantly.The protein content reached maximum value at 21℃(14.52 mg/L)and varied significantly in S-EPS and loosely bound EPS(LB-EPS).In the EPSs matrix,humus substances and protein were main components of S-EPS and LB-EPS,and protein was the main component of tightly bound EPS(TB-EPS).Secondly,the cell density of Dolichospermum increased during the temperature rise while the aggregation ratio decreased.Moreover,zeta potential and surface thermodynamic analysis of Dolichospermum revealed that the interfacial free energy and electrostatic repulsion increased gradually with increasing temperature,which further reduced the aggregation of Dolichospermum.Finally,principal component analysis(PCA)analysis showed the aggregation of Dolichospermum was directly related to the changes of protein in EPSs(especially S-EPS and LB-EPS)and zeta potential,and polysaccharides in EPSs inhibited the aggregation of Dolichospermum.Based on these results,it was illustrated that the composition and concentration of EPSs affected the cell surface properties of Dolichospermum with the change of temperature and thus affected the aggregation of Dolichospermum.
基金by the National Key Research and Development Plan of China[No.2016YFC1000902].
文摘To reduce mucosal damage in the gastrointestinal tract caused by aspirin,we developed a dissolvable polymeric microneedle(MN)patch loaded with aspirin.Biodegradable polymers provide mechanical strength to the MNs.The MN tips punctured the cuticle of the skin and dissolved when in contact with the subcutaneous tissue.The aspirin in the MN patch is delivered continuously through an array of micropores created by the punctures,providing a stable plasma concentration of aspirin.The factors affecting the stability of aspirin during MNs fabrication were comprehensively analyzed,and the hydrolysis rate of aspirin in the MNs was less than 2%.Compared to oral administration,MN administration not only had a smoother plasma concentration curve but also resulted in a lower effective dose of antiplatelet aggregation.Aspirin-loaded MNs were mildly irritating to the skin,causing only slight erythema on the skin and recovery within 24 h.In summary,aspirin-loaded MNs provide a new method to reduce gastrointestinal adverse effects in patients requiring aspirin regularly.
基金financial support from the projects of the National Natural Science Foundation of China (52373074 and 51972121)the Independent Research Project of Maoming Laboratory (2022ZD002)。
文摘Solid-state lithium(Li) metal batteries overwhelm the lithium-ion batteries by harvesting high energy from Li metal anode with ultrahigh capacities and gaining excellent safety from solid electrolytes.However,the uncontrollable solvents in solid electrolytes usually aggravate poor interfacial contact with lithium metal anode and deteriorate Li^(+) pathways.Here a copolymeric network-structured ion conductor by rationally integrating cellulose nanofibril as a two-in-one functional material is employed to anchor the solvent.Taking advantages of tightly anchoring of cellulose nanofibril to solvent,the asconstructed quasi-solid polymer-based electrolyte offers rapid Li^(+) transport channels and realizes effective Li-dendrite suppression,which enables high ionic conductivity of 1.93 × 10^(-3)S cm^(-1) at room temperature,long-term Li plating/stripping over 1900 h,and high capacity retention of 99%.This work provides a fresh strategy for creating solid electrolytes that meet both high ionic conductivity and interfacial stability requirements for practical solid-state lithium metal battery.
文摘An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of carbon atoms in the amide group at 166 ppm, which was demonstrated by the solid nuclear magnetic resonance carbon spectrum. It was shown to be the stretching vibration absorption peak of the amide N-H bond at 3342 cm<sup>−1</sup> by Fourier infrared (FT-IR) spectroscopy. It was obtained that the energy band near 1100 - 1276 cm<sup>−1</sup> belongs to the absorption peak of the para-substituted benzene ring and the band near 2977 cm<sup>−1</sup> was the C-H stretching vibration peak of the benzene ring by Raman spectroscopy. The molecular structure of the synthesized polyamide compound was confirmed by FT-IR, Raman, and solid <sup>13</sup>C-NMR spectroscopies. It was proved that the polymer is stable up to 300˚C and has a relatively high stability by the thermogravimetric analysis. It was also confirmed by the fluorescence spectrum that it has a strong blue fluorescence near 420 nm. The morphological characteristics of the polymer were further demonstrated by electron scanning electron microscopy (SEM). The properties of polymeric p-benzoyl-4,4'-diaminobenzoyl-aniline were found to emit strong blue fluorescence and have good thermal stability, making it a promising functional material for fluorescence in the blue region with potential for large-scale applications.
文摘In view of the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them, there is a need to investigate modern trends in ground improvement techniques in order to determine their reliability. This study is thus aimed at using the reliability based approach to analyze the use of polyvinyl alcohol (PVA) in combination with 1,2,3,4 Butane-tetracarboxylic acid (BTCA) for ground improvement. This study is necessary given the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them. Simplex lattice design was employed to build the design of experiment before experimental investigations were carried out on the PVA-BTCA treated soft soils. Reliability indices were computed on the basis of the 28<sup>th</sup> day unconfined compressive strength (UCS) of the treated soil. Reliability index models were developed using the Scheffe’s technique and optimized using excel solver. From analysis of results, reliability model developed proved adequate at 5% level of significance. PVA-BTCA combination provided a potential reliability or probability of success of 99.936% at components combination of: 98.4256% for soil, 1.2352% for PVA, 0.3392% for BTCA and 15.9934% for water. It was therefore recommended that financial implications of using PVA-BTCA for stabilization be compared to those of conventional methods, in order to compare their performance-cost ratio.
文摘An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of carbon atoms in the amide group at 166 ppm, which was demonstrated by the solid nuclear magnetic resonance carbon spectrum. It was shown to be the stretching vibration absorption peak of the amide N-H bond at 3342 cm<sup>−1</sup> by Fourier infrared (FT-IR) spectroscopy. It was obtained that the energy band near 1100 - 1276 cm<sup>−1</sup> belongs to the absorption peak of the para-substituted benzene ring and the band near 2977 cm<sup>−1</sup> was the C-H stretching vibration peak of the benzene ring by Raman spectroscopy. The molecular structure of the synthesized polyamide compound was confirmed by FT-IR, Raman, and solid <sup>13</sup>C-NMR spectroscopies. It was proved that the polymer is stable up to 300˚C and has a relatively high stability by the thermogravimetric analysis. It was also confirmed by the fluorescence spectrum that it has a strong blue fluorescence near 420 nm. The morphological characteristics of the polymer were further demonstrated by electron scanning electron microscopy (SEM). The properties of polymeric p-benzoyl-4,4'-diaminobenzoyl-aniline were found to emit strong blue fluorescence and have good thermal stability, making it a promising functional material for fluorescence in the blue region with potential for large-scale applications.
基金financial supports from the Research Grants Council of the Hong Kong Special Administrative Region(Poly U15217521)the Hong Kong Polytechnic University(Q-CDA3)Initiative for fostering University of Research and Innovation Program of the National Research Foundation(NRF)funded by the Korean government(MSIT)(No.2020M3H1A1077095)
文摘Sodium-ion batteries(SIBs)have attracted considerable interest as an alternative to lithium-ion batteries owing to their similar electrochemical performance and superior long-term cycle stability.Organic materials are regarded as promising anode materials for constructing SIBs with high capacity and good retention.However,utilization of organic materials is rather limited by their low energy density and poor stability at high current densities.To overcome these limitations,we utilized a novel polymeric disodium phthalocyanines(pNaPc)as SIB anodes to provide stable coordination sites for Na ions as well as to enhance the stability at high current density.By varying the linker type during a one-pot cyclization and polymerization process,two pNaPc anodes with O-(O-pNaPc)and S-linkers(S-pNaPc)were prepared,and their structural and electrochemical properties were investigated.The O-pNaPc binds Na ions with a lower binding energy compared with S-pNaPc,which leads to more facile Na-ion coordination/dissociation when engaged as SIB anode.The use of O-pNaPc significantly improves the redox kinetics and cycle stability and allows the fabrication of a full cell against Na_(3)V_(2)(PO_(4))_(2)F_(3)/C cathode,which demonstrates its practical application with high energy density(288 Wh kg^(-1))and high power density(149 W kg^(-1)).
基金This work was financially supported from the National Nature Science Foundation of China(NO.81360483)from the Nature Science Foundation of Ningxia(No.NZ12193).
文摘Most of the conventional chemotherapeutic agents used for cancer chemotherapy suffer from multidrug resistance of tumor cells and poor antitumor efficacy.Based on physiological differences between the normal tissue and the tumor tissue,one effective approach to improve the efficacy of cancer chemotherapy is to develop pH-sensitive polymeric micellar delivery systems.The copolymers with reversible protonationedeprotonation core units or acid-liable bonds between the therapeutic agents and the micelle-forming copolymers can be used to form pH-sensitive polymeric micelles for extracellular and intracellular drug smart release.These systems can be triggered to release drug in response to the slightly acidic extracellular fluids of tumor tissue after accumulation in tumor tissues via the enhanced permeability and retention effect,or they can be triggered to release drug in endosomes or lysosomes by pH-controlled micelle hydrolysis or dissociation after uptake by cells via the endocytic pathway.The pH-sensitive micelles have been proved the specific tumor cell targeting,enhanced cellular internalization,rapid drug release,and multidrug resistance reversal.The multifunctional polymeric micelles combining extracellular pH-sensitivity with receptor-mediated active targeting strategies are of great interest for enhanced tumor targeting.The micelles with receptor-mediated and intracellular pH targeting functions are internalized via receptor-mediated endocytosis followed by endosomal-pH triggered drug release inside the cells,which reverses multidrug resistance.The pH sensitivity strategy of the polymeric micelles facilitates the specific drug delivery with reduced systemic side effects and improved chemotherapeutical efficacy,and is a novel promising platform for tumor-targeting drug delivery.
基金TheNationalNaturalScienceFoundationofChina (No .2 96 770 0 4)
文摘The effects of the colorimetric buffer solutions were investigated while the two colorimetric reactions of A1 ferron complex and Fe ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexation colorimetric analysis method of A1 Fe ferron in view of the total concentration of ｛A1+Fe｝ was then established to determine the species distribution of polymeric Al Fe. The testing wavelength was recommended at 362 nm and the testing pH value was 5. With a comparison of the ratios of n Al / n Fe , the standard adsorption curves of the polymeric Al Fe solutions were derived from the experimental results. Furthermore, the solutions’composition were various in both the molar n Al / n Fe ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total [A1+Fe] which ranged from 10 -5 to 10 -4 mol/L.
基金financially supported by National Natural Science Foundation of China(No.81673363)
文摘To achieve targeted thrombolysis, a targeted delivery system of lumbrokinase(LK) was constructed using RGDfk-conjugated hybrid micelles. Based on the specific affinity of RGDfk to glycoprotein complex of GP Ⅱ b/Ⅲ a expressed on the surface of membrane of activated platelet, LK loaded targeted micelles(LKTM) can be delivered to thrombus. The hybrid micelles were composed of polycaprolactone-block-poly(2-(dimethylamino) ethyl methacrylate)(PCL-PDMAEMA), methoxy polyethylene glycol-block-polycaprolactone(mPEG-PCL)and RGDfk conjugated polycaprolactone-block-polyethylene glycol(PCL-PEG-RGDfk). PCLPDMAEMA was synthesized via ring open polymerization(ROP) and atom transfer radical polymerization(ATRP). PCL-PEG-RGDfk was synthesized via ROP and carbodiimide chemistry. The prepared LKTM was characterized by dynamic light scattering(DLS) and transmission electron microscope(TEM). Colloidal stability assay showed the prepared LKTM was stable. Biocompatibility assay was performed to determine the safe concentration range of polymer. The assay of fluorescent distribution in vivo demonstrated that LKTM can be efficiently delivered to thrombi in vivo. Thrombolysis in vivo indicated the thrombolytic potency of LKTM was optimal in all groups. Notably, the laboratory mice treated with LKTM exhibited a significantly shorter tail bleeding time compared to those treated with LK or LK-loaded micelles without RGDfk, which suggested that the targeted delivery of LK using RGDfk-conjugated hybrid micelles effectively reduced the bleeding risk.
文摘The characterization and enhanced oil recovery mechanisms of a nanosized polymeric cross-linked gel are presented herein.A negatively charged nanogel was synthesized using a typical free radical suspension polymerization process by employing 2-acrylamido 2-methyl propane sulfonic acid monomer.The synthesized nanogel showed a narrow size distribution with one peak pointing to a predominant homogeneous droplet size.The charged nanogels were also able to adsorb at the oil-water interfaces to reduce interfacial tension and stabilize oil-in-water emulsions,which ultimately improved the recovered oil from hydrocarbon reservoirs.In addition,a fixed concentration of negatively charged surfactant(sodium dodecyl sulfate or SDS)was combined with different concentrations of the nanogel.The effect of the nanogels combined with surfactant on sandstone core plugs was examined by running a series of core flooding experiments using multiple flow patterns.The results show that combining nanogel and SDS was able to reduce the interfacial tension to a value of 6 Nm/m.The core flooding experiments suggest the ability of the nanogel,both alone and combined with SDS,to improve the oil recovery by a factor of 15%after initial seawater flooding.
基金financially supported by the National Natural Science Foundation of China(No.51572116 and 51871113)Key Research and Development Program of Xuzhou(KC17004).
文摘Lithium–sulfur(Li–S)batteries are being explored as promising advanced energy storage systems due to their ultra-high energy density.However,fast capacity fading and low coulombic efficiency,resulting from the dissolution of polysulfides,remain a serious challenge.Compared to weak physical adsorptions or barriers,chemical confinement based on strong chemical interaction is a more effective approach to address the shuttle issue.Herein,we devise a novel polymeric sulfur/carbon nanotube composite for Li–S battery,for which 2,5-dithiobiurea is chosen as the stabilizer of long-chain sulfur.This offers chemical bonds which bridge the polymeric sulfur and carbon nanotubes.The obtained composite can deliver an ultra-high reversible capacity of 1076.2 m Ahg^-1(based on the entire composite)at the rate of 0.1 C with an exceptional initial Coulombic efficiency of 96.2%,as well as remarkable cycle performance.This performance is mainly attributed to the reaction reversibility of the obtained polymeric sulfur-based composite during the discharge/charge process.This was confirmed by density functional theory calculations for the first time.
基金Project(20777095) supported by the National Natural Science Foundation of ChinaProject(CSTC, 2006AB7055) supported by Chongqing Science and Technology Commission of ChinaProject(708071) supported by the Cultivation Fund of the Key Scientific and Technical Innovation Project,Ministry of Education,China
文摘Polymeric phosphate ferric sulfate (PPFS),a new improved coagulation reagent,was prepared by polymeric ferric sulfate (PFS),Na2HPO4 and NaOH. The degree of iron polymerisation (Fepol) of PPFS was determined by means of the ferron-timed spectroscopy method. Furthermore,the effect of n(P)/n(Fe),alkalization degree,pH value,and PPFS dosage on the removal rate of eutrophic water turbidity and chl-a and ζ-potential of products were also investigated. The experimental results show that the best n(P)/n(Fe) of flocculation effect in stable product of PFFS is 0.3; the best alkalization degree of flocculation effect is 0.2,while the n(P)/n(Fe) is 0.3. Under the neutral and subalkalic (pH value is 7-8) conditions,PPFS achieves the best processing efficiency. PPFS has more excellent turbidity and higher chlorophyl removal rate by studying treatment eutrophic water in comparison with PFS.
基金financially supported by State Key Laboratory of Organic-Inorganic Composites(oic-201601012)the International Scientific Partnership Program ISPP at King Saud University for funding this research work through ISPP#0080
文摘We synthesized one quaternary ammonium polymeric ionic liquids(PILs)P[VBTHEA]Cl and three imidazolium PILs of P[VEIm]Br, P[VEIm]BF_4, P[VEIm]PF_6 by free-radical polymerization in solution. These PILs were characterized by FT-IR,~1 H-NMR,^(13)C-NMR, TGA, XRD and SEM. Their CO_2 adsorption capacities were measured under different pressures and temperatures by constant-volume technique. It was observed that quaternary ammonium PILs of P[VBTHEA]Cl have higher adsorption capacity for CO_2 than those imidazolium PILs, following P[VBTHEA]Cl > P[VEIm]PF_6> P[VEIm]BF_4> P[VEIm]Br, which may be ascribed to higher positive charge density on ammonium cation than that on imidazolium cation and thus stronger interaction with CO_2, consistent with the results from dual-mode adsorption model that ammonium PILs have much higher CO_2 bulk absorption than imidazolium PILs. CO_2 adsorption capacity of P[VBTHEA]Cl is 9.02 mg/g under 295 K and 1 bar, which is comparable to that of some other PILs, and is much higher than that of the corresponding ILs monomer. These PILs have good adsorption selectivity for CO_2 over N_2 and regeneration efficiency.
