Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS control.Cemented AS backfill(CASB)exhibits brittle fracture.Polypropylene(PP)fibers are good toughening materials.When the tougheni...Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS control.Cemented AS backfill(CASB)exhibits brittle fracture.Polypropylene(PP)fibers are good toughening materials.When the toughening effect of fibers is analyzed,their influence on the slurry conveying performance should also be considered.Additionally,cement affects the interactions among the hydration products,fibers,and aggregates.In this study,the effects of cement content(8wt%,9wt%,and 10wt%)and PP fiber length(6,9,and 12 mm)and dosage(0.05wt%,0.1wt%,0.15wt%,0.2wt%,and 0.25wt%)on fluidity and mechanical properties of the fibertoughened CASB(FCASB)were analyzed.The results indicated that with increases in the three aforementioned factors,the slump flow decreased,while the rheological parameters increased.Uniaxial compressive strength(UCS)increased with the increase of cement content and fiber length,and with an increase in fiber dosage,it first increased and then decreased.The strain increased with the increase of fiber dosage and length.The effect of PP fibers became more pronounced with the increase of cement content.Digital image correlation(DIC)test results showed that the addition of fibers can restrain the peeling of blocks and the expansion of fissure,and reduce the stress concentration of the FCASB.Scanning electron microscopy(SEM)test indicated that the functional mechanisms of fibers mainly involved the interactions of fibers with the hydration products and matrix and the spatial distribution of fibers.On the basis of single-factor analysis,the response surface method(RSM)was used to analyze the effects of the three aforementioned factors and their interaction terms on the UCS.The influence surface of the two-factor interaction terms and the three-dimensional scatter plot of the three-factor coupling were established.In conclusion,the response law of the FCASB properties under the effects of cement and PP fibers were obtained,which provides theoretical and engineering guidance for FCASB filling.展开更多
Fiber-reinforced soils have been of great interest to experimenters for building foundations’strength performance,time,and economy.This paper investigates the effects of water content and polypropylene fiber dosage a...Fiber-reinforced soils have been of great interest to experimenters for building foundations’strength performance,time,and economy.This paper investigates the effects of water content and polypropylene fiber dosage and length on loess’s unconfined compressive strength(UCS)according to the central composite response surface design test procedure.The water content is 11%–25%,the mass ratio of fiber to soil is 0.1%–0.9%,and the fiber length ranges from 6–18 mm.The response surface method(RSM)developed full quadratic models of different variables with response values.After analysis of variance(ANOVA),the mathematical model developed in this study was statistically significant(p≤0.05)and applicable to the optimization process.The optimization results showed that the optimal water content values,fiber amount,and fiber length were 16.41%,0.579%,and 14.90 mm,respectively.The unconfined compressive strength of the optimized specimens was increased by 288.017 kPa.The research results can reference the design and construction of fiber-reinforced soil in practical projects such as road base engineering and foundation engineering.展开更多
Silty clay is widely used as subgrade filler in cold regions,which suffer from frost heave in winter and mud pumping in spring.In this study,polyvinyl alcohol(PVA)and polypropylene(PP)fiber were used to improve the me...Silty clay is widely used as subgrade filler in cold regions,which suffer from frost heave in winter and mud pumping in spring.In this study,polyvinyl alcohol(PVA)and polypropylene(PP)fiber were used to improve the mechanical and frost heave behavior of silty clay in cold regions,and the direct shear test and one-dimensional frost heave test were employed in studying improvement effects.Moreover,improvement mechanisms of PVA and PP fiber were analyzed based on test results.The main findings are as follows.(1)Both PP and PVA can heighten the strength of silty clay and suppress frost heave,but the PVA solution has a more decisive influence on improving mechanical properties than PP fiber.(2)The improvement mechanism of the PVA solution is cementing.The improvement effect of 2%PVA solution is the best,which can increase the shear strength by approximately 40%–60%at different stress levels and decrease the frost heave ratio from 0.89%to 0.16%at optimal water content.(3)For 2%PVA improved samples,0.25%PP fiber can further increase soil cohesion by approximately 20–30 kPa at different stress levels and further decrease the frost heave ratio from 0.16%to 0.07%at optimal water content.The improvement effect is neglectable when the PP fiber content exceeds 0.25%.Overall,2%PVA with 0.25%PP fiber is the optimum combination to improve silty clay in cold regions.展开更多
To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences...To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences of polypropylene (PP) fiber on the mechanical properties and volume stability were investigated. The results show that compressive strength of the geopolymer containing 33.3%(mass fraction) fly ash by steam curing at 80 ℃ for 6 d is improved by 35.5%. The 3-day compressive strength, flexural strength and impacting energy of geopolymers containing 0.05%PP fiber increase by 67.8%, 36.1% and 6.25%, while the shrinkage and modulus of compressibility decrease by 38.6% and 31.3%, respectively. The results of scanning electron microscopy (SEM) and the appearances of crack growths confirm that PP fiber can offer a bridging effect over the harmful pores and defects and change the expanding ways of cracks, resulting in a great improvement of strength and toughness.展开更多
Adding polypropylene(PP)fibers and coarse aggregates has become a popular way to enhance the strength and stability of the cemented tailings backfilling(CTB)body.It is essential to explore the influence of tailings-ag...Adding polypropylene(PP)fibers and coarse aggregates has become a popular way to enhance the strength and stability of the cemented tailings backfilling(CTB)body.It is essential to explore the influence of tailings-aggregate ratio and fiber content on the mechanical properties of CTB samples.The comprehensive tests of the unconfined compressive strength(UCS),slump and microstructure were designed,and the regression models were established to characterize the effect of the strength,ductility and fluidity.The results indicate that the tailings-aggregate ratio of 5:5 and PP fiber content of 0.5 kg/m^(3) are the optimum point considering the UCS,cracking strain,peak strain and post-peak ductility.The tailings-aggregate ratio is consistent with the unary quadratic to the UCS and a linear model with a negative slope to the slump.Microstructural analysis indicates that PP fiber tends to bridge the cracks and rod-mill sand to serve as the skeleton of the paste matrix,which can enhance the compactness and improve the ductility of the CTB.The results presented here are of great significance to the understanding and application of coarse aggregates and fibers to improve the mechanical properties of CTB.展开更多
The influence of low volume fraction of polypropylene（PP） fibers on the tensile properties of normal and high strength concretes was studied. The experimental results indicate that the addition of PP fibers in concr...The influence of low volume fraction of polypropylene（PP） fibers on the tensile properties of normal and high strength concretes was studied. The experimental results indicate that the addition of PP fibers in concrete leads to a reduction in tensile strength during the age of 28 d. Whereas, after 28 days, there is a notable effect in tensile strength due to PP fibers restraining the formation and growth of microcracks in concrete, which improves the continuity and integrality of concrete structure, Thus, a low volume fraction of PP fibers is beneficial to enhancing the long-term tensile strength of concrete materials and improving the durability of concrete structures.展开更多
The compressive, shear strengths and abrasion-erosion resistance as well as flexural properties of two polypropylene fiber reinforced concretes and the comparison with a steel fiber reinforced concrete were reported.T...The compressive, shear strengths and abrasion-erosion resistance as well as flexural properties of two polypropylene fiber reinforced concretes and the comparison with a steel fiber reinforced concrete were reported.The exprimental results show that a low content of polypropylene fiber (0.91kg/m3 of concrete) slightly decreases the compressive and shear strengths, and appreciably increased the flexural strength, but obviously enhances the toughness index and fracture energy for the concrete with the same mix proportion, consequently it plays a role of anti-cracking and improving toughness in concrete. Moreover, the polypropylene mesh fiber is better than the polypropylene monofilament fiber in improving flexural strength and toughness of concrete, but the two types of polypropylene fibers are inferior to steel fiber. All the polypropylene and steel fibers have no great beneficial effect on the abrasion-erosion resistance of concrete.展开更多
The performances of the cement-based materials can be improved by the incorporation of polypropylene fiber, but the damage processes become more complex with different fiber contents at the same time. The acoustic emi...The performances of the cement-based materials can be improved by the incorporation of polypropylene fiber, but the damage processes become more complex with different fiber contents at the same time. The acoustic emission（AE） technology can achieve the global monitoring of internal damage in materials. The evolution process of failure mode and damage degree of polypropylene fiber reinforced mortar and concrete were analyzed by measuring the AE energy, RA value, AF value and b value. It was found that the cement matrix cracked on the initial stage, the cracks further developed on the medium stage and the fibers were pulled out on the last stage. The matrix cracked with minor injury cracks, but the fiber broke with serious damage cracks. The cumulative AE energy was proportional to the polypropylene fiber reinforced concrete and mortar＇s ductility. The damage mode and damage degree can be judged by identifying the damage stage obtained by the analysis of the AF value.展开更多
Antistatic polymer fibers were investigated by using carbon nanotubes （CNTs） to enhance the antistatic ability of inner antistatic agents based on the mechanism of attracting moisture by polar radical groups. It is ...Antistatic polymer fibers were investigated by using carbon nanotubes （CNTs） to enhance the antistatic ability of inner antistatic agents based on the mechanism of attracting moisture by polar radical groups. It is indicated that the antistatic ability of the fibers filled with composite antistatic agents that contain CNTs and organic antistatic agents was superior to that of the fibers filled either with pure organic antistatic agents or pure CNTs. The antistatic ability of the composite antistatic agent fabricated by an in situ process was superior to that of the composite antistatic agent fabricated by direct dispersing CNTs in the antistatic agent carrier. Moreover, the heat-treated CNTs could further enhance the antistatic effect compared with the initial CNTs. The antistatic effect is significantly influenced by the content of CNTs in the composite antistatic agent.展开更多
The strength and deformation characteristics of polypropylene fiber reinforced concrete ( PFRC) beams were investigated by four-point bending procedures in this paper. Two kinds of polypropylene fibers with different ...The strength and deformation characteristics of polypropylene fiber reinforced concrete ( PFRC) beams were investigated by four-point bending procedures in this paper. Two kinds of polypropylene fibers with different fiber contents (0.2% , 0.5% , 1.0% and 1.5% ) by volume were used in, the beam, which measured 100 × 100 mm with a span of 300 mm. It was found that the strength of the reinforced concrete beams was significantly decreased, whereas the flexural toughness was improved, compared to those unreinforced concrete beams. Geometry properties and volume contents of polypropylene fiber were considered to be important factors for improving the flexural toughness. Moreover, the composite mechanism between polypropylene fiber and concrete was analyzed and discussed.展开更多
A new form of foam cement was produced by mixing alkali-activated slag,clay,a small amount of polypropylene fibers with prepared foam during stirring.The preparation of the material is quite different from the normal ...A new form of foam cement was produced by mixing alkali-activated slag,clay,a small amount of polypropylene fibers with prepared foam during stirring.The preparation of the material is quite different from the normal one,which is produced just at room temperature and without baking.The fabrication of this energy-saving and low-price material can be favorable for lowering carbon emission by using recycled industrial wastes.Thermal conductivity of 0.116 W/（m·k）,compressive strength of 3.30 MPa,flexural strength of 0.8 MPa and density of 453 kg/m3 can be achieved after 28 days aging.The hydration product is C-S-H with less Ca（OH）2,calcium aluminum and zeolite,which was characterized by X-ray diffraction（XRD） measurement.This prospective foam cement may be expected to be an excellent economical energy-saving building material.展开更多
Influences of polypropylene （PP） fiber and styrene-butadiene rubber （SBR） polymer latex on the strength performance, abrasion resistance of cement mortar were studied. The experimental results show that the flexur...Influences of polypropylene （PP） fiber and styrene-butadiene rubber （SBR） polymer latex on the strength performance, abrasion resistance of cement mortar were studied. The experimental results show that the flexural strength, brittleness index （σF/σC） and abrasion resistance can be improved significantly by the addition of PP fiber and SBR polymer latex. The relationship between the flexural strength and abrasion resistance was analyzed, showing a good linear relationship between them. The reinforced mechanism of PP fiber and SBR polymer latex on cement mortar was analyzed by some microscopic tests. The test results show that the addition of SBR polymer latex has no significant influence on the cement hydration after 7 d curing. Adding SBR polymer latex into cement mortar can form a polymer transition layer in the interfaces of PP fiber and cement hydrates, which improves the bonding properties between the PP fiber and cement mortar matrix effectively.展开更多
Plasma etching technology is used to treat Polypropylene fiber with different fineness. The result shows that the plasma etching treatment is useful to improve the wicking property of polypropylene, although too much ...Plasma etching technology is used to treat Polypropylene fiber with different fineness. The result shows that the plasma etching treatment is useful to improve the wicking property of polypropylene, although too much time of treatment may be converse to the wicking property. A surface roughness theory is applied to explain the reason why the plasma can improve the wicking property. In this experiment, fibers with different treating time under certain voltage(180 V) and pressure(0.1 mm Hg)are used as experimental sample.展开更多
Properties and mechanism were investigated on flexural fatigue of concrete containing polypropylene fibers and ground granulated blast furnace slag（GGBFS）.Four polypropylene fibers’volume fractions and five slag pr...Properties and mechanism were investigated on flexural fatigue of concrete containing polypropylene fibers and ground granulated blast furnace slag（GGBFS）.Four polypropylene fibers’volume fractions and five slag proportions were considered.An experiment was conducted to obtain the fatigue lives at three stress levels in 20 Hz frequency and at a constant stress level of 0.59 in four frequency respectively.Mechanism and evaluation were investigated based on the experimental data.Fatigue life span models were established.The results show that the addition of polypropylene fibers improves the flexural fatigue cumulative strength and fatigue life span.It is proposed that the slag particles and hydrated products improve Interfacial Transition Zone（ITZ）structure and benefit flexural fatigue performance.A composite reinforce effect is found with the incorporation of slag and polypropylene fibers.The optimum mixture contents 55%slag with 0.6%polypropylene fiber for the cumulative fatigue stress.Fatigue properties are decreased as the stress level increasing,the higher frequency reduces the fatigue strength more than lower frequency at a constant stress level.展开更多
With the application of X-ray computed tomography（CT） technology of C80 high-strength concrete with polypropylene fiber at elevated temperatures, the microscopic damage evolution process observation and image buildi...With the application of X-ray computed tomography（CT） technology of C80 high-strength concrete with polypropylene fiber at elevated temperatures, the microscopic damage evolution process observation and image building could be obtained, based on the statistics theory and numerical analysis of the combination of concrete internal defects extension and evolution regularity of microscopic structure. The expermental results show that the defect rate has changed at different temperatures and can determine the concrete degradation threshold temperatures. Also, data analysis can help to establish the evolution equation between the defect rate and the effect of temperature damage, and identify that the addition of polypropylene fibers in the high strength concrete at high temperature can improve cracking resistance.展开更多
The influence of polypropylene fiber on the flexural fatigue performance of high-strength concrete (HSC), which could be used as cover of reinforcement of segment, was investigate by three-point load bending tests. Al...The influence of polypropylene fiber on the flexural fatigue performance of high-strength concrete (HSC), which could be used as cover of reinforcement of segment, was investigate by three-point load bending tests. Also, the flexural fatigue equations of high-strength concrete with and without polypropylene fiber were established through test analysis. The experimental results indicate that the addition of polypropylene fiber can improve the static bending strength of segment concrete, and the important is that it can markedly increase the flexural fatigue performance of the HSC subjected to cyclic bending load. Especially when with 1.37 kg/m3 addition of the fiber was corporate with silica fume and slag powder, the fatigue life of the HSC can be increased by 43.4% compared to that of the segment concrete without fiber, silica fume and slag.展开更多
Syndiotactic polypropylene （sPP） as-spun fiber （sPP1） and drawn fiber （sPP2） were prepared by melt-spinning and melt-spinning/hot-drawing, respectively. The structure transition of the two fibers induced by anne...Syndiotactic polypropylene （sPP） as-spun fiber （sPP1） and drawn fiber （sPP2） were prepared by melt-spinning and melt-spinning/hot-drawing, respectively. The structure transition of the two fibers induced by annealing at different temperatures and the corresponding mechanical properties were subsequently investigated by the combination of Fourier transform infrared spectroscopy （FTIR）, wide-angle X-ray diffraction （WAXD） and tensile testing. The results indicate that the chain conformation and crystal forms of the two sPP fibers are not obviously changed at low annealing temperature （40℃）. With increasing the annealing temperature, the trans-planar conformation and mesophase in sPP1 and sPP2 fibers can be completely transformed to helical conformation and crystal form I under tension. Upon removing the tension, a small amount of mesophase and trans-planar conformation will be regained. The mechanical properties of the annealed fibers are manifestly dependent on their initial structure and the annealing temperature.展开更多
The crystallization properties and morphology structure of the cationic dyeable polypropylene fibers which were produced by the blending spinning method were studied by making use of X-ray and scanning electron micros...The crystallization properties and morphology structure of the cationic dyeable polypropylene fibers which were produced by the blending spinning method were studied by making use of X-ray and scanning electron microscopy (SEM). It comes to the conclusions that the larger the crystallite size in the fibers is , the better the dyeable properties of the fibers are and there is a little compatibility between the dyeable agent and polypropylene resin. And the dye-uptake of the fibers may be up to 90% because the dyeable agent can uniformly be scattered in polypropylene.展开更多
This paper presents the experimental results of study on mechanical properties, heat and humidity transfer through AAC （autoclaved aerated concrete） mixed with PP （polypropylene fiber）. The performance of AAC-PP i...This paper presents the experimental results of study on mechanical properties, heat and humidity transfer through AAC （autoclaved aerated concrete） mixed with PP （polypropylene fiber）. The performance of AAC-PP is investigated in terms of compressive strength, flexural strength, splitting tensile strength, porosity, heat and humidity capacity. The results are compared with control specimen made of autoclaved aerated concrete only （Non-AAC-PP）. Results showed that ultimate compressive strength, flexural strength and splitting tensile strength can be obtained when the content of polypropylene fiber added at 0.75% by volume while porosity of specimens rapidly decreased when content of fiber addition increased above 1% of its volume. Additional, a comparison study of heat and humidity transfer properties on AAC-PP walls showed that the AAC-PP house had lower indoor air and moisture content than （Non-AAC-PP） house. Therefore, addition PP fiber on AAC increased mechanical properties, enhanced hygrothermal performance and reducing moisture content under tropical climate of Bangkok.展开更多
Apart from many advantages,High Strength Concrete(HSC)has disadvantages in terms of brittleness and poor resistance to fire.Various studies suggest that when polypropylene(PP)fibers are uniformly distributed within co...Apart from many advantages,High Strength Concrete(HSC)has disadvantages in terms of brittleness and poor resistance to fire.Various studies suggest that when polypropylene(PP)fibers are uniformly distributed within concrete,they play an active role in improving spalling resistance of concrete when exposed to elevated temperature while having no adverse effect on its mechanical properties.Therefore,there is a necessity to quantify the effect of the addition of polypropylene fibers in terms of the fiber dosage,the strength of the concrete,and the residual mechanical properties of fiber-reinforced concrete under exposure to high temperature from fire.The study was carried out on three water/cement(w/c)ratios(0.47,0.36&0.20)using granite aggregate for determining short term mechanical properties of Polypropylene fiber reinforced concrete in comparison to control mix.The experimental program includes 100×200 mm&150 x 300 mm cylinders with fiber volume of 0.5%,that were subjected to temperatures exposures of 400°C and 600°C for durations of 1 hour.From the results,it was observed that no significant enhancement in mechanical properties such as modulus of elasticity,Poisson’s ratio,split tensile strength,flexural strength,and compressive strength was observed at room temperature and at elevated temperatures.展开更多
基金financially supported by the National Natural Science Foundation of China(No.52174095)the Top Innovative Talents Cultivation Fund for Doctoral Postgraduates(No.BBJ2023054).
文摘Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS control.Cemented AS backfill(CASB)exhibits brittle fracture.Polypropylene(PP)fibers are good toughening materials.When the toughening effect of fibers is analyzed,their influence on the slurry conveying performance should also be considered.Additionally,cement affects the interactions among the hydration products,fibers,and aggregates.In this study,the effects of cement content(8wt%,9wt%,and 10wt%)and PP fiber length(6,9,and 12 mm)and dosage(0.05wt%,0.1wt%,0.15wt%,0.2wt%,and 0.25wt%)on fluidity and mechanical properties of the fibertoughened CASB(FCASB)were analyzed.The results indicated that with increases in the three aforementioned factors,the slump flow decreased,while the rheological parameters increased.Uniaxial compressive strength(UCS)increased with the increase of cement content and fiber length,and with an increase in fiber dosage,it first increased and then decreased.The strain increased with the increase of fiber dosage and length.The effect of PP fibers became more pronounced with the increase of cement content.Digital image correlation(DIC)test results showed that the addition of fibers can restrain the peeling of blocks and the expansion of fissure,and reduce the stress concentration of the FCASB.Scanning electron microscopy(SEM)test indicated that the functional mechanisms of fibers mainly involved the interactions of fibers with the hydration products and matrix and the spatial distribution of fibers.On the basis of single-factor analysis,the response surface method(RSM)was used to analyze the effects of the three aforementioned factors and their interaction terms on the UCS.The influence surface of the two-factor interaction terms and the three-dimensional scatter plot of the three-factor coupling were established.In conclusion,the response law of the FCASB properties under the effects of cement and PP fibers were obtained,which provides theoretical and engineering guidance for FCASB filling.
文摘Fiber-reinforced soils have been of great interest to experimenters for building foundations’strength performance,time,and economy.This paper investigates the effects of water content and polypropylene fiber dosage and length on loess’s unconfined compressive strength(UCS)according to the central composite response surface design test procedure.The water content is 11%–25%,the mass ratio of fiber to soil is 0.1%–0.9%,and the fiber length ranges from 6–18 mm.The response surface method(RSM)developed full quadratic models of different variables with response values.After analysis of variance(ANOVA),the mathematical model developed in this study was statistically significant(p≤0.05)and applicable to the optimization process.The optimization results showed that the optimal water content values,fiber amount,and fiber length were 16.41%,0.579%,and 14.90 mm,respectively.The unconfined compressive strength of the optimized specimens was increased by 288.017 kPa.The research results can reference the design and construction of fiber-reinforced soil in practical projects such as road base engineering and foundation engineering.
基金supported by the National Natural Science Foundation of China (41731281,42071078)the National Key Basic Research Program of China (No.2012CB026104)Science and Technology Project of Qinghai,China (2021-GX-121).
文摘Silty clay is widely used as subgrade filler in cold regions,which suffer from frost heave in winter and mud pumping in spring.In this study,polyvinyl alcohol(PVA)and polypropylene(PP)fiber were used to improve the mechanical and frost heave behavior of silty clay in cold regions,and the direct shear test and one-dimensional frost heave test were employed in studying improvement effects.Moreover,improvement mechanisms of PVA and PP fiber were analyzed based on test results.The main findings are as follows.(1)Both PP and PVA can heighten the strength of silty clay and suppress frost heave,but the PVA solution has a more decisive influence on improving mechanical properties than PP fiber.(2)The improvement mechanism of the PVA solution is cementing.The improvement effect of 2%PVA solution is the best,which can increase the shear strength by approximately 40%–60%at different stress levels and decrease the frost heave ratio from 0.89%to 0.16%at optimal water content.(3)For 2%PVA improved samples,0.25%PP fiber can further increase soil cohesion by approximately 20–30 kPa at different stress levels and further decrease the frost heave ratio from 0.16%to 0.07%at optimal water content.The improvement effect is neglectable when the PP fiber content exceeds 0.25%.Overall,2%PVA with 0.25%PP fiber is the optimum combination to improve silty clay in cold regions.
基金Project(2006AA06Z225) supported by the National High-Tech Research and Development Program of China
文摘To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences of polypropylene (PP) fiber on the mechanical properties and volume stability were investigated. The results show that compressive strength of the geopolymer containing 33.3%(mass fraction) fly ash by steam curing at 80 ℃ for 6 d is improved by 35.5%. The 3-day compressive strength, flexural strength and impacting energy of geopolymers containing 0.05%PP fiber increase by 67.8%, 36.1% and 6.25%, while the shrinkage and modulus of compressibility decrease by 38.6% and 31.3%, respectively. The results of scanning electron microscopy (SEM) and the appearances of crack growths confirm that PP fiber can offer a bridging effect over the harmful pores and defects and change the expanding ways of cracks, resulting in a great improvement of strength and toughness.
基金Project(51722401)supported by the National Science Foundation for Excellent Young Scholars of ChinaProject(51334001)supported by the Key Program of National Natural Science Foundation of ChinaProject(FRF-TP-18-003C1)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Adding polypropylene(PP)fibers and coarse aggregates has become a popular way to enhance the strength and stability of the cemented tailings backfilling(CTB)body.It is essential to explore the influence of tailings-aggregate ratio and fiber content on the mechanical properties of CTB samples.The comprehensive tests of the unconfined compressive strength(UCS),slump and microstructure were designed,and the regression models were established to characterize the effect of the strength,ductility and fluidity.The results indicate that the tailings-aggregate ratio of 5:5 and PP fiber content of 0.5 kg/m^(3) are the optimum point considering the UCS,cracking strain,peak strain and post-peak ductility.The tailings-aggregate ratio is consistent with the unary quadratic to the UCS and a linear model with a negative slope to the slump.Microstructural analysis indicates that PP fiber tends to bridge the cracks and rod-mill sand to serve as the skeleton of the paste matrix,which can enhance the compactness and improve the ductility of the CTB.The results presented here are of great significance to the understanding and application of coarse aggregates and fibers to improve the mechanical properties of CTB.
基金Funded by the Key Project of Science and Technology Committee of Shanghai Municipality (No. 032112059 ).
文摘The influence of low volume fraction of polypropylene（PP） fibers on the tensile properties of normal and high strength concretes was studied. The experimental results indicate that the addition of PP fibers in concrete leads to a reduction in tensile strength during the age of 28 d. Whereas, after 28 days, there is a notable effect in tensile strength due to PP fibers restraining the formation and growth of microcracks in concrete, which improves the continuity and integrality of concrete structure, Thus, a low volume fraction of PP fibers is beneficial to enhancing the long-term tensile strength of concrete materials and improving the durability of concrete structures.
文摘The compressive, shear strengths and abrasion-erosion resistance as well as flexural properties of two polypropylene fiber reinforced concretes and the comparison with a steel fiber reinforced concrete were reported.The exprimental results show that a low content of polypropylene fiber (0.91kg/m3 of concrete) slightly decreases the compressive and shear strengths, and appreciably increased the flexural strength, but obviously enhances the toughness index and fracture energy for the concrete with the same mix proportion, consequently it plays a role of anti-cracking and improving toughness in concrete. Moreover, the polypropylene mesh fiber is better than the polypropylene monofilament fiber in improving flexural strength and toughness of concrete, but the two types of polypropylene fibers are inferior to steel fiber. All the polypropylene and steel fibers have no great beneficial effect on the abrasion-erosion resistance of concrete.
基金Funded by National Natural Science Foundation of China(No.51009058)Postdoctoral Science Foundation of China(No.2011M501160)
文摘The performances of the cement-based materials can be improved by the incorporation of polypropylene fiber, but the damage processes become more complex with different fiber contents at the same time. The acoustic emission（AE） technology can achieve the global monitoring of internal damage in materials. The evolution process of failure mode and damage degree of polypropylene fiber reinforced mortar and concrete were analyzed by measuring the AE energy, RA value, AF value and b value. It was found that the cement matrix cracked on the initial stage, the cracks further developed on the medium stage and the fibers were pulled out on the last stage. The matrix cracked with minor injury cracks, but the fiber broke with serious damage cracks. The cumulative AE energy was proportional to the polypropylene fiber reinforced concrete and mortar＇s ductility. The damage mode and damage degree can be judged by identifying the damage stage obtained by the analysis of the AF value.
基金This work was financially supported by the Major State Basic Research Development Program of China (No.10332020)
文摘Antistatic polymer fibers were investigated by using carbon nanotubes （CNTs） to enhance the antistatic ability of inner antistatic agents based on the mechanism of attracting moisture by polar radical groups. It is indicated that the antistatic ability of the fibers filled with composite antistatic agents that contain CNTs and organic antistatic agents was superior to that of the fibers filled either with pure organic antistatic agents or pure CNTs. The antistatic ability of the composite antistatic agent fabricated by an in situ process was superior to that of the composite antistatic agent fabricated by direct dispersing CNTs in the antistatic agent carrier. Moreover, the heat-treated CNTs could further enhance the antistatic effect compared with the initial CNTs. The antistatic effect is significantly influenced by the content of CNTs in the composite antistatic agent.
基金Supported by Natural Science Foundation of China (No. 59908007) and Foundation for University Key Teacher by the Min-istry of Education (GG - 430 - 10247 - 1175).
文摘The strength and deformation characteristics of polypropylene fiber reinforced concrete ( PFRC) beams were investigated by four-point bending procedures in this paper. Two kinds of polypropylene fibers with different fiber contents (0.2% , 0.5% , 1.0% and 1.5% ) by volume were used in, the beam, which measured 100 × 100 mm with a span of 300 mm. It was found that the strength of the reinforced concrete beams was significantly decreased, whereas the flexural toughness was improved, compared to those unreinforced concrete beams. Geometry properties and volume contents of polypropylene fiber were considered to be important factors for improving the flexural toughness. Moreover, the composite mechanism between polypropylene fiber and concrete was analyzed and discussed.
基金Funded by the Ministry of Science & Technology of China(No.2006BAJ04A04)
文摘A new form of foam cement was produced by mixing alkali-activated slag,clay,a small amount of polypropylene fibers with prepared foam during stirring.The preparation of the material is quite different from the normal one,which is produced just at room temperature and without baking.The fabrication of this energy-saving and low-price material can be favorable for lowering carbon emission by using recycled industrial wastes.Thermal conductivity of 0.116 W/（m·k）,compressive strength of 3.30 MPa,flexural strength of 0.8 MPa and density of 453 kg/m3 can be achieved after 28 days aging.The hydration product is C-S-H with less Ca（OH）2,calcium aluminum and zeolite,which was characterized by X-ray diffraction（XRD） measurement.This prospective foam cement may be expected to be an excellent economical energy-saving building material.
基金Funded by the Science Project from Department of Communication of Hubei Province
文摘Influences of polypropylene （PP） fiber and styrene-butadiene rubber （SBR） polymer latex on the strength performance, abrasion resistance of cement mortar were studied. The experimental results show that the flexural strength, brittleness index （σF/σC） and abrasion resistance can be improved significantly by the addition of PP fiber and SBR polymer latex. The relationship between the flexural strength and abrasion resistance was analyzed, showing a good linear relationship between them. The reinforced mechanism of PP fiber and SBR polymer latex on cement mortar was analyzed by some microscopic tests. The test results show that the addition of SBR polymer latex has no significant influence on the cement hydration after 7 d curing. Adding SBR polymer latex into cement mortar can form a polymer transition layer in the interfaces of PP fiber and cement hydrates, which improves the bonding properties between the PP fiber and cement mortar matrix effectively.
文摘Plasma etching technology is used to treat Polypropylene fiber with different fineness. The result shows that the plasma etching treatment is useful to improve the wicking property of polypropylene, although too much time of treatment may be converse to the wicking property. A surface roughness theory is applied to explain the reason why the plasma can improve the wicking property. In this experiment, fibers with different treating time under certain voltage(180 V) and pressure(0.1 mm Hg)are used as experimental sample.
基金Funded by the National Science and Technology Support Plan (No.2006BAD11B03)Shaanxi Provincial Natural Science Foundation(No.SJ08E111)
文摘Properties and mechanism were investigated on flexural fatigue of concrete containing polypropylene fibers and ground granulated blast furnace slag（GGBFS）.Four polypropylene fibers’volume fractions and five slag proportions were considered.An experiment was conducted to obtain the fatigue lives at three stress levels in 20 Hz frequency and at a constant stress level of 0.59 in four frequency respectively.Mechanism and evaluation were investigated based on the experimental data.Fatigue life span models were established.The results show that the addition of polypropylene fibers improves the flexural fatigue cumulative strength and fatigue life span.It is proposed that the slag particles and hydrated products improve Interfacial Transition Zone（ITZ）structure and benefit flexural fatigue performance.A composite reinforce effect is found with the incorporation of slag and polypropylene fibers.The optimum mixture contents 55%slag with 0.6%polypropylene fiber for the cumulative fatigue stress.Fatigue properties are decreased as the stress level increasing,the higher frequency reduces the fatigue strength more than lower frequency at a constant stress level.
基金Funded by the National Natural Science Foundation of China(No.51278325)the Shanxi Province Natural Science Foundation(No.2011011024-2)
文摘With the application of X-ray computed tomography（CT） technology of C80 high-strength concrete with polypropylene fiber at elevated temperatures, the microscopic damage evolution process observation and image building could be obtained, based on the statistics theory and numerical analysis of the combination of concrete internal defects extension and evolution regularity of microscopic structure. The expermental results show that the defect rate has changed at different temperatures and can determine the concrete degradation threshold temperatures. Also, data analysis can help to establish the evolution equation between the defect rate and the effect of temperature damage, and identify that the addition of polypropylene fibers in the high strength concrete at high temperature can improve cracking resistance.
基金Funded by the National "863" Program (No.2005AA332010)
文摘The influence of polypropylene fiber on the flexural fatigue performance of high-strength concrete (HSC), which could be used as cover of reinforcement of segment, was investigate by three-point load bending tests. Also, the flexural fatigue equations of high-strength concrete with and without polypropylene fiber were established through test analysis. The experimental results indicate that the addition of polypropylene fiber can improve the static bending strength of segment concrete, and the important is that it can markedly increase the flexural fatigue performance of the HSC subjected to cyclic bending load. Especially when with 1.37 kg/m3 addition of the fiber was corporate with silica fume and slag powder, the fatigue life of the HSC can be increased by 43.4% compared to that of the segment concrete without fiber, silica fume and slag.
基金supported by the National Natural Science Foundation of China(No.50603029)the Innovation Foundation of Center for Molecular Science,Chinese Academy of Sciences(CMS-Y200724)
文摘Syndiotactic polypropylene （sPP） as-spun fiber （sPP1） and drawn fiber （sPP2） were prepared by melt-spinning and melt-spinning/hot-drawing, respectively. The structure transition of the two fibers induced by annealing at different temperatures and the corresponding mechanical properties were subsequently investigated by the combination of Fourier transform infrared spectroscopy （FTIR）, wide-angle X-ray diffraction （WAXD） and tensile testing. The results indicate that the chain conformation and crystal forms of the two sPP fibers are not obviously changed at low annealing temperature （40℃）. With increasing the annealing temperature, the trans-planar conformation and mesophase in sPP1 and sPP2 fibers can be completely transformed to helical conformation and crystal form I under tension. Upon removing the tension, a small amount of mesophase and trans-planar conformation will be regained. The mechanical properties of the annealed fibers are manifestly dependent on their initial structure and the annealing temperature.
文摘The crystallization properties and morphology structure of the cationic dyeable polypropylene fibers which were produced by the blending spinning method were studied by making use of X-ray and scanning electron microscopy (SEM). It comes to the conclusions that the larger the crystallite size in the fibers is , the better the dyeable properties of the fibers are and there is a little compatibility between the dyeable agent and polypropylene resin. And the dye-uptake of the fibers may be up to 90% because the dyeable agent can uniformly be scattered in polypropylene.
文摘This paper presents the experimental results of study on mechanical properties, heat and humidity transfer through AAC （autoclaved aerated concrete） mixed with PP （polypropylene fiber）. The performance of AAC-PP is investigated in terms of compressive strength, flexural strength, splitting tensile strength, porosity, heat and humidity capacity. The results are compared with control specimen made of autoclaved aerated concrete only （Non-AAC-PP）. Results showed that ultimate compressive strength, flexural strength and splitting tensile strength can be obtained when the content of polypropylene fiber added at 0.75% by volume while porosity of specimens rapidly decreased when content of fiber addition increased above 1% of its volume. Additional, a comparison study of heat and humidity transfer properties on AAC-PP walls showed that the AAC-PP house had lower indoor air and moisture content than （Non-AAC-PP） house. Therefore, addition PP fiber on AAC increased mechanical properties, enhanced hygrothermal performance and reducing moisture content under tropical climate of Bangkok.
文摘Apart from many advantages,High Strength Concrete(HSC)has disadvantages in terms of brittleness and poor resistance to fire.Various studies suggest that when polypropylene(PP)fibers are uniformly distributed within concrete,they play an active role in improving spalling resistance of concrete when exposed to elevated temperature while having no adverse effect on its mechanical properties.Therefore,there is a necessity to quantify the effect of the addition of polypropylene fibers in terms of the fiber dosage,the strength of the concrete,and the residual mechanical properties of fiber-reinforced concrete under exposure to high temperature from fire.The study was carried out on three water/cement(w/c)ratios(0.47,0.36&0.20)using granite aggregate for determining short term mechanical properties of Polypropylene fiber reinforced concrete in comparison to control mix.The experimental program includes 100×200 mm&150 x 300 mm cylinders with fiber volume of 0.5%,that were subjected to temperatures exposures of 400°C and 600°C for durations of 1 hour.From the results,it was observed that no significant enhancement in mechanical properties such as modulus of elasticity,Poisson’s ratio,split tensile strength,flexural strength,and compressive strength was observed at room temperature and at elevated temperatures.
