Tidal fluctuations of Hangzhou Bay produce progressive pressure waves in adjacent field fractured aquifers, as the pressure waves propagate, groundwater levels and hydraulic gradients continuously fluctuate. The effec...Tidal fluctuations of Hangzhou Bay produce progressive pressure waves in adjacent field fractured aquifers, as the pressure waves propagate, groundwater levels and hydraulic gradients continuously fluctuate. The effect of tidal fluctuations on groundwater flow can be determined using the mean hydraulic gradient that can be calculated by comparing mean ground and surface water elevations.Tidal fluctuation is shown to affect the piezometer readings taken in a nearshore fractured aquifer around the nuclear power engineering field. Continuous monitoring of a network of seven piezometers provided relations between the tidal cycle and the piezometer readings. The relations can be expressed in times of a time and amplitude scaling factor. The time lag and the tidal efficiency factor and wavelength are calculated using these parameters. It provides significant scientific basis to prevent tide and groundwater for the nuclear power engineering construction and safety run of nuclear power station in the future.展开更多
The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories...The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories, rivers and lakes. The waste and sludge are very harmful to water organisms, human health and drinking water, and directly affect the environment. Sludge and waste also occupy large areas of land. There are several methods to treat waste and sludge, such as burial, chemical treatment and incineration. Incineration is more effective than the展开更多
The earthquake characteristics and geological structure of the site to sitting the Qinshan Nuclear Power Station are closely related. According to site investigation drilling, sampling, seismic sound logging wave test...The earthquake characteristics and geological structure of the site to sitting the Qinshan Nuclear Power Station are closely related. According to site investigation drilling, sampling, seismic sound logging wave test in single-hole and cross-hole, laboratory wave velocity test of intact rock, together with analysis of the site geological conditions, the seismic wave test results of the site between strata lithology and the geologic structure were studied. The relationships of seismic waves with the site lithology and the geologic structure were set up. The dynamic parameters of different grades of weathering profile were deduced. The results assist the seismic design of Phase Ⅲ Qinshan Nuclear Power Plant, China.展开更多
Along with the fast development of national economy, environmental issues have become more and more prominent. China has promulgated a series of policies of energy-saving and emission-reduction to
Ash deposition is a form of particulate fouling, and appears usually in boiler economizers. The ash deposition increases capital expenditure, energy input and maintenance costs. An analog experiment for monitoring ash...Ash deposition is a form of particulate fouling, and appears usually in boiler economizers. The ash deposition increases capital expenditure, energy input and maintenance costs. An analog experiment for monitoring ash deposition was performed from the analogous objective of a 410 t/h boiler economizer to verify the rationality and reliability of the ash-deposition-monitoring model presented in order to increase the security and economy in economizer running. The analog experiment platform is a tube-shell exchanger that conforms well to the conditions of a self-modeling area. The analog flue gas in the shell side is the heated air mixed with ash, and in the tube side the fluid is water heated by the flue gas. The fluid state in the water side and the flue gas side follows the second self-modeling area. A 4-factor-3-level orthogonal table was used to schedule 9 operation conditions of orthogonal experiment, with the 4 factors being heat power, flue gas velocity, ashes grain diameter and adding ashes quantity while the three levels are different values due to different position classes in every factor. The ash deposition thermal resistances is calculated by the model with the measure parameters of temperature and pressure drop. It shows that the values of the ash deposition thermal resistances gradually increase up to a stable state. And the experimental results are reliable by F testing method at α= 0.001. Therefore, the model can be applied in online monitoring of ash deposition in a boiler economizers in power plants and provides scientific decision on ash deposition prediction and sootblowing.展开更多
A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted ...A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.展开更多
A method of enhancing power system stability for a single machine to infinite bus power system is presented. The technique used compromises the effectiveness of Proportional-Integral-Derivative controller （PID）. In ...A method of enhancing power system stability for a single machine to infinite bus power system is presented. The technique used compromises the effectiveness of Proportional-Integral-Derivative controller （PID）. In order to satisfy the damping characteristics for the proposed power system over a wide range of operating interval, rotational speed, torque angle and terminal voltage signals of the synchronous machine are utilized as control signals of the system. It is well known that these variables have significant effects on damping the generators shaft mechanical oscillations, it＇ll be so easy to validate the most suitable controller as seen from the simulation results.展开更多
Climate change and global warming are among the most severe threats to the global ecosystem,caused by greenhouse gas emissions.Therefore,all industries that cause environmental emissions should collaborate in the stru...Climate change and global warming are among the most severe threats to the global ecosystem,caused by greenhouse gas emissions.Therefore,all industries that cause environmental emissions should collaborate in the struggle against climate change.In this context,the International Maritime Organization(IMO)approved the initial greenhouse gas strategy at the MEPC 72 session in April 2018 to achieve targets for 2050.With this strategy,the IMO aims to create and improve new regulations that can enhance energy efficiency to achieve their short-term,midterm,and long-term goals.In this study,one of the novel terms,energy efficiency existing ship index(EEXI)values,has been calculated for the Turkish fleet to guide the maritime sector.The Turkish fleet in the study refers to the Turkish-owned vessels both sailing with a national or international flag.In accordance with this regulation,the number of Turkish fleets that were identified as either above or below the IMO reference lines has been determined.Additionally,EEXI values have been recalculated using the engine power limitation(EPL)method for ships that exceed the required limits,and the success rate of this method has been estimated.As a result,the application of EPL increased the number of ships below the Phase 2 reference line from 15.6%to 53.1%.To the best of our knowledge,this research,which has been carried out on all Turkish-owned ships,is the first study intended to serve as a guide for other ship owners in the global maritime industry regarding energy efficiency management.展开更多
Until now, it has been difficult to obtain on-line three-dimensional (3-D) temperature distribution information which can reflect the overall combustion condition in the furnace of a coal-fired power plant boiler. A c...Until now, it has been difficult to obtain on-line three-dimensional (3-D) temperature distribution information which can reflect the overall combustion condition in the furnace of a coal-fired power plant boiler. A combustion monitoring system is introduced which can solve the problem efficiently. Through this system, the 3-D temperature distribution in a coal-fired boiler furnace can be obtained using a novel flame image processing technique. Briefly, we first outline the visualization principle. Then, the hardware and software design of the system in a 300 MW twin-furnace coal-fired boiler are introduced in detail. The visualization of the 3-D temperature distribution in the twin-furnace boiler is realized with an industrial computer and the Distributed Control System (DCS) of the boiler. The practical operation of the system shows that it can provide valuable combustion information of a furnace and is useful for the combustion diagnosis and adjustment in coal-fired power plants.展开更多
As the smart grid concepts are emphasized lately, the need to modernize the power engineering education is also well recognized. This paper presents a set of newly developed modeling, simulation and testing tools aime...As the smart grid concepts are emphasized lately, the need to modernize the power engineering education is also well recognized. This paper presents a set of newly developed modeling, simulation and testing tools aimed at better understanding of the design concept and related applications for protective relaying and substation automation solutions for the smart grid. Since the smart grid applications require integration of data from multiple IEDs （intelligent electronic devices）, understanding properties of each IED type in detail, as well as their responses to the power system events is needed. In addition, understanding the communication requirements to perform data integration is also important. To illustrate how the mentioned smart grid issues may be taught, the following advanced teaching approaches are presented： （1） Use of modeling and simulation means to better understand interaction between the relays and power system; （2） Use of IED test facilities to better understand performance of physical devices used for protection, monitoring and control; （3） Utilization of communication network modeling tools to simulate the communication network within SAS （substation automation system）. Examples showing the use of proposed techniques for teaching the fundamentals and applications are presented. The examples demonstrate the adequacy and efficiency of the proposed techniques.展开更多
A simulation model for a certain diesel engine cooling system is set up by using GT-COOL. The backwater temperature response in different operating conditions is simulated numerically. The effects of single or multipl...A simulation model for a certain diesel engine cooling system is set up by using GT-COOL. The backwater temperature response in different operating conditions is simulated numerically. The effects of single or multiple system parameters on the water temperature are analyzed. The results show that, changing different single parameters, the time taken for the steady backwater temperature is different, but relatively short;and if multiple parameters are changed, the time will be longer. Referred to the thermal balance test, the simulation results are validated and provide a basis for the intelligent control of the cooling system.展开更多
9 to 12,April,2018 Suzhou,China International Symposium series on High Power Laser Science and Engineering,aiming at bringing together worldwide scientists and engineers working on high power laser and physics,is held...9 to 12,April,2018 Suzhou,China International Symposium series on High Power Laser Science and Engineering,aiming at bringing together worldwide scientists and engineers working on high power laser and physics,is held every two years since 2014.On behalf of the 3rd International Symposium on High Power Laser Science and Engineering(HPLSE2018),展开更多
Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A nov...Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A novel type of cylindrical,non-overlapping,transverse-flux,and permanent-magnet linear motor（TFPLM） is investigated,furthermore,a high power factor and less process complexity structure research is developed.The impact of magnetic leakage factor on power factor is discussed,by using the Finite Element Analysis（FEA） model of stirling engine and TFPLM,an optimization method for electro-magnetic design of TFPLM is proposed based on magnetic leakage factor.The relation between power factor and structure parameter is investigated,and a structure parameter optimization method is proposed taking power factor maximum as a goal.At last,the test bench is founded,starting experimental and generating experimental are performed,and a good agreement of simulation and experimental is achieved.The power factor is improved and the process complexity is decreased.This research provides the instruction to design high-power factor permanent-magnet linear generator.展开更多
Increasing efficiency and reducing emissions are fundamental approaches to achieving peak carbon emissions and carbon neutrality for the transportation and power industries.The Argon power cycle(APC)is a novel concept...Increasing efficiency and reducing emissions are fundamental approaches to achieving peak carbon emissions and carbon neutrality for the transportation and power industries.The Argon power cycle(APC)is a novel concept for high efficiency and zero emissions.However,APC faces the challenges of severe knock and low power density at high efficiency.To elevate efficiency and power density simultaneously of APC,the Miller cycle is applied and combined with APC.The calculation method is based on a modification of the previous thermodynamic method.The mixture of hydrogen and oxygen is controlled in the stoichiometric ratio.The results indicate that to obtain a thermal conversion efficiency of 70%,in the Otto cycle,the compression ratio and the AR(argon molar ratio in the argon-oxygen mixture)could be 9 and 95%,respectively.In comparison,for the Miller cycle,these two parameters only need to be 7 and 91%.A lower compression ratio can reduce the negative effect of knock,and a reduced AR increases the power density by 66%with the same efficiency.The improvement effect is significant when the expansion-compression ratio is 1.5.Meanwhile,increasing the expansion-compression ratio is more effective in the argon-oxygen mixture than in the nitrogen–oxygen mixture.For the next-generation Argon/Miller power cycle engine,the feasible design to achieve the indicated thermal efficiency of 58.6%should be a compression ratio of 11,an expansion-compression ratio of 1.5,and an AR of 91%.展开更多
A certain amount of ammonia reducer were directly injected into the 4102BZLQ Diesel engine's combustion chamber when the combustion temperature decreases to 1573-1073K, NOx generated could be reduced to 1.11g/(kW&...A certain amount of ammonia reducer were directly injected into the 4102BZLQ Diesel engine's combustion chamber when the combustion temperature decreases to 1573-1073K, NOx generated could be reduced to 1.11g/(kW·h). Based on PRF combustion mechanism, NO was tested by using the heavy-duty diesel engine test cycle of ESC thirteen conditions[1], the ammonia spray angle and amount were tested and optimized in different conditions. The test results show that the thermal efficiency of Diesel engine does not decrease while NO exhaust decreases.展开更多
文摘Tidal fluctuations of Hangzhou Bay produce progressive pressure waves in adjacent field fractured aquifers, as the pressure waves propagate, groundwater levels and hydraulic gradients continuously fluctuate. The effect of tidal fluctuations on groundwater flow can be determined using the mean hydraulic gradient that can be calculated by comparing mean ground and surface water elevations.Tidal fluctuation is shown to affect the piezometer readings taken in a nearshore fractured aquifer around the nuclear power engineering field. Continuous monitoring of a network of seven piezometers provided relations between the tidal cycle and the piezometer readings. The relations can be expressed in times of a time and amplitude scaling factor. The time lag and the tidal efficiency factor and wavelength are calculated using these parameters. It provides significant scientific basis to prevent tide and groundwater for the nuclear power engineering construction and safety run of nuclear power station in the future.
文摘The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories, rivers and lakes. The waste and sludge are very harmful to water organisms, human health and drinking water, and directly affect the environment. Sludge and waste also occupy large areas of land. There are several methods to treat waste and sludge, such as burial, chemical treatment and incineration. Incineration is more effective than the
文摘The earthquake characteristics and geological structure of the site to sitting the Qinshan Nuclear Power Station are closely related. According to site investigation drilling, sampling, seismic sound logging wave test in single-hole and cross-hole, laboratory wave velocity test of intact rock, together with analysis of the site geological conditions, the seismic wave test results of the site between strata lithology and the geologic structure were studied. The relationships of seismic waves with the site lithology and the geologic structure were set up. The dynamic parameters of different grades of weathering profile were deduced. The results assist the seismic design of Phase Ⅲ Qinshan Nuclear Power Plant, China.
文摘Along with the fast development of national economy, environmental issues have become more and more prominent. China has promulgated a series of policies of energy-saving and emission-reduction to
文摘Ash deposition is a form of particulate fouling, and appears usually in boiler economizers. The ash deposition increases capital expenditure, energy input and maintenance costs. An analog experiment for monitoring ash deposition was performed from the analogous objective of a 410 t/h boiler economizer to verify the rationality and reliability of the ash-deposition-monitoring model presented in order to increase the security and economy in economizer running. The analog experiment platform is a tube-shell exchanger that conforms well to the conditions of a self-modeling area. The analog flue gas in the shell side is the heated air mixed with ash, and in the tube side the fluid is water heated by the flue gas. The fluid state in the water side and the flue gas side follows the second self-modeling area. A 4-factor-3-level orthogonal table was used to schedule 9 operation conditions of orthogonal experiment, with the 4 factors being heat power, flue gas velocity, ashes grain diameter and adding ashes quantity while the three levels are different values due to different position classes in every factor. The ash deposition thermal resistances is calculated by the model with the measure parameters of temperature and pressure drop. It shows that the values of the ash deposition thermal resistances gradually increase up to a stable state. And the experimental results are reliable by F testing method at α= 0.001. Therefore, the model can be applied in online monitoring of ash deposition in a boiler economizers in power plants and provides scientific decision on ash deposition prediction and sootblowing.
基金the National Natural Science Foundation of China(No:20273043)the Ministry of Education of China for providing financial support for this project
文摘A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.
文摘A method of enhancing power system stability for a single machine to infinite bus power system is presented. The technique used compromises the effectiveness of Proportional-Integral-Derivative controller （PID）. In order to satisfy the damping characteristics for the proposed power system over a wide range of operating interval, rotational speed, torque angle and terminal voltage signals of the synchronous machine are utilized as control signals of the system. It is well known that these variables have significant effects on damping the generators shaft mechanical oscillations, it＇ll be so easy to validate the most suitable controller as seen from the simulation results.
基金Supported by Yildiz Technical University(YTU)Scientific Research Project Coordination Unit(SRPC)(BAPK)(Grant No.FBA-2021-4470).
文摘Climate change and global warming are among the most severe threats to the global ecosystem,caused by greenhouse gas emissions.Therefore,all industries that cause environmental emissions should collaborate in the struggle against climate change.In this context,the International Maritime Organization(IMO)approved the initial greenhouse gas strategy at the MEPC 72 session in April 2018 to achieve targets for 2050.With this strategy,the IMO aims to create and improve new regulations that can enhance energy efficiency to achieve their short-term,midterm,and long-term goals.In this study,one of the novel terms,energy efficiency existing ship index(EEXI)values,has been calculated for the Turkish fleet to guide the maritime sector.The Turkish fleet in the study refers to the Turkish-owned vessels both sailing with a national or international flag.In accordance with this regulation,the number of Turkish fleets that were identified as either above or below the IMO reference lines has been determined.Additionally,EEXI values have been recalculated using the engine power limitation(EPL)method for ships that exceed the required limits,and the success rate of this method has been estimated.As a result,the application of EPL increased the number of ships below the Phase 2 reference line from 15.6%to 53.1%.To the best of our knowledge,this research,which has been carried out on all Turkish-owned ships,is the first study intended to serve as a guide for other ship owners in the global maritime industry regarding energy efficiency management.
基金Project 50636010 supported by the National Natural Science Foundation of China
文摘Until now, it has been difficult to obtain on-line three-dimensional (3-D) temperature distribution information which can reflect the overall combustion condition in the furnace of a coal-fired power plant boiler. A combustion monitoring system is introduced which can solve the problem efficiently. Through this system, the 3-D temperature distribution in a coal-fired boiler furnace can be obtained using a novel flame image processing technique. Briefly, we first outline the visualization principle. Then, the hardware and software design of the system in a 300 MW twin-furnace coal-fired boiler are introduced in detail. The visualization of the 3-D temperature distribution in the twin-furnace boiler is realized with an industrial computer and the Distributed Control System (DCS) of the boiler. The practical operation of the system shows that it can provide valuable combustion information of a furnace and is useful for the combustion diagnosis and adjustment in coal-fired power plants.
文摘As the smart grid concepts are emphasized lately, the need to modernize the power engineering education is also well recognized. This paper presents a set of newly developed modeling, simulation and testing tools aimed at better understanding of the design concept and related applications for protective relaying and substation automation solutions for the smart grid. Since the smart grid applications require integration of data from multiple IEDs （intelligent electronic devices）, understanding properties of each IED type in detail, as well as their responses to the power system events is needed. In addition, understanding the communication requirements to perform data integration is also important. To illustrate how the mentioned smart grid issues may be taught, the following advanced teaching approaches are presented： （1） Use of modeling and simulation means to better understand interaction between the relays and power system; （2） Use of IED test facilities to better understand performance of physical devices used for protection, monitoring and control; （3） Utilization of communication network modeling tools to simulate the communication network within SAS （substation automation system）. Examples showing the use of proposed techniques for teaching the fundamentals and applications are presented. The examples demonstrate the adequacy and efficiency of the proposed techniques.
文摘A simulation model for a certain diesel engine cooling system is set up by using GT-COOL. The backwater temperature response in different operating conditions is simulated numerically. The effects of single or multiple system parameters on the water temperature are analyzed. The results show that, changing different single parameters, the time taken for the steady backwater temperature is different, but relatively short;and if multiple parameters are changed, the time will be longer. Referred to the thermal balance test, the simulation results are validated and provide a basis for the intelligent control of the cooling system.
文摘9 to 12,April,2018 Suzhou,China International Symposium series on High Power Laser Science and Engineering,aiming at bringing together worldwide scientists and engineers working on high power laser and physics,is held every two years since 2014.On behalf of the 3rd International Symposium on High Power Laser Science and Engineering(HPLSE2018),
基金Supported by National Natural Science Foundation of China(Grant No.50877013)
文摘Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A novel type of cylindrical,non-overlapping,transverse-flux,and permanent-magnet linear motor（TFPLM） is investigated,furthermore,a high power factor and less process complexity structure research is developed.The impact of magnetic leakage factor on power factor is discussed,by using the Finite Element Analysis（FEA） model of stirling engine and TFPLM,an optimization method for electro-magnetic design of TFPLM is proposed based on magnetic leakage factor.The relation between power factor and structure parameter is investigated,and a structure parameter optimization method is proposed taking power factor maximum as a goal.At last,the test bench is founded,starting experimental and generating experimental are performed,and a good agreement of simulation and experimental is achieved.The power factor is improved and the process complexity is decreased.This research provides the instruction to design high-power factor permanent-magnet linear generator.
基金supported by the Natural Science Foundation of China(No.51576141)the Shanghai Science and Technology Program(No.22ZR1463000)。
文摘Increasing efficiency and reducing emissions are fundamental approaches to achieving peak carbon emissions and carbon neutrality for the transportation and power industries.The Argon power cycle(APC)is a novel concept for high efficiency and zero emissions.However,APC faces the challenges of severe knock and low power density at high efficiency.To elevate efficiency and power density simultaneously of APC,the Miller cycle is applied and combined with APC.The calculation method is based on a modification of the previous thermodynamic method.The mixture of hydrogen and oxygen is controlled in the stoichiometric ratio.The results indicate that to obtain a thermal conversion efficiency of 70%,in the Otto cycle,the compression ratio and the AR(argon molar ratio in the argon-oxygen mixture)could be 9 and 95%,respectively.In comparison,for the Miller cycle,these two parameters only need to be 7 and 91%.A lower compression ratio can reduce the negative effect of knock,and a reduced AR increases the power density by 66%with the same efficiency.The improvement effect is significant when the expansion-compression ratio is 1.5.Meanwhile,increasing the expansion-compression ratio is more effective in the argon-oxygen mixture than in the nitrogen–oxygen mixture.For the next-generation Argon/Miller power cycle engine,the feasible design to achieve the indicated thermal efficiency of 58.6%should be a compression ratio of 11,an expansion-compression ratio of 1.5,and an AR of 91%.
基金Sponsored by the Hunan Science and Technology Agency Science Research Program 09(2009GK3091)the Hunan Provincial Education Department Science Research Program 09(09C1138)
文摘A certain amount of ammonia reducer were directly injected into the 4102BZLQ Diesel engine's combustion chamber when the combustion temperature decreases to 1573-1073K, NOx generated could be reduced to 1.11g/(kW·h). Based on PRF combustion mechanism, NO was tested by using the heavy-duty diesel engine test cycle of ESC thirteen conditions[1], the ammonia spray angle and amount were tested and optimized in different conditions. The test results show that the thermal efficiency of Diesel engine does not decrease while NO exhaust decreases.
