The field experiment designs with single replication were frequently used for factorial experiments in which the numbers of field plots were limited, but the experimental error was difficult to be estimated. To study ...The field experiment designs with single replication were frequently used for factorial experiments in which the numbers of field plots were limited, but the experimental error was difficult to be estimated. To study a new statistical method for improving precision of regression analysis of such experiments in rice, 84 fertilizer experiments were conducted in 15 provinces of China, including Zhejiang, Jiangsu, Anhui, Hunan, Sichuan, Heilongjiang, etc. Three factors with 14 treatments (N: 0—225kg/ha, P: 0 —112. 5kg/ha, K: 0—150kg/ha) and two replications were employed using approaching optimun design. There were 2352 (84×14×2=2352) Yield deviations (d) between the individual treatment yields and its arithmetic mean. The results indicated that:展开更多
Three methods for calculating cable force （analytic method, fitting method and finite element method） are analyzed and compared. The effects of boundary condition, spectrum resolution, sampling time, and number of s...Three methods for calculating cable force （analytic method, fitting method and finite element method） are analyzed and compared. The effects of boundary condition, spectrum resolution, sampling time, and number of sampling points on the precision of cable force identification are discussed, and error analysis is conducted. The results of three methods applied to a practical project are significantly less than the design value. Comparatively, the result of finite element method is the closest to the design value. Moreover, their computational precision and error are compared and analyzed. The precision of frequency identification of cables, long cables in particular, is strongly affected by frequency resolution. If the frequency resolution is included in calculating the cable force, the identification error can be reduced greatly.展开更多
This paper focuses on a strategic improving quality of＂high quality assurance CAE （computer aided engineering） analysis model＂ to be used in development design. The authors present a case oftransaxle oil seal leak...This paper focuses on a strategic improving quality of＂high quality assurance CAE （computer aided engineering） analysis model＂ to be used in development design. The authors present a case oftransaxle oil seal leakage in automotive drive trains, a technical reliability problem that generates bottlenecks for auto manufacturers around the world. The application of this model is used to analyze cavitation caused by the metal particles （foreign matter） generated through transaxle wear. This analyzing method primarily uses numerical simulation （CAE） to clarify the technological mechanism generating oil leaks as a result of foreign metallic substances entering oil seals in the drive train. Quality improvement using this CAE analyzing method was verified by successfully applying it to the technological problem of development design bottlenecks at auto manufacturers.展开更多
Tropospheric delay is a primary error source in earth observations and a variety of radio navigation technologies. In this paper, the relationship between zenith tropospheric delays and the elevation and longitude of ...Tropospheric delay is a primary error source in earth observations and a variety of radio navigation technologies. In this paper, the relationship between zenith tropospheric delays and the elevation and longitude of stations is analyzed using the zenith tropospheric delay final products of International GNSS Service （IGS） stations from 2011. Two new models are proposed for estimating zenith tropospheric delays from regional CORS data without meteorological data. The proposed models are compared with the direct interpolation method and the remove-restore method using data from Guangxi CORS. The results show that the new models significantly improve the calculated precision. Finally, the root mean square （RMS） errors of the new models were used to estimate the surface precipitable water vapor （PWV） value at CORS station, which was determined to be less than 2 mm.展开更多
A photoelectric equipment for inspecting artillery bore is composed of digital display grating sensor and data processing with computer.It can replace the traditional mechanical measurer and realize the automatic insp...A photoelectric equipment for inspecting artillery bore is composed of digital display grating sensor and data processing with computer.It can replace the traditional mechanical measurer and realize the automatic inspection of artillery bore.Introduced are briefly the working principles and analysis of this device.展开更多
This thesis illustrates the method and precision of employing analytical photogrammetry to carry out similar materials model experiment in surveying the displacement of surveying points and analyzing the deformation l...This thesis illustrates the method and precision of employing analytical photogrammetry to carry out similar materials model experiment in surveying the displacement of surveying points and analyzing the deformation law of rock layersand earths surface according to the results in the studying the deformation law of the earths surface caused by extracting mine coal underground.展开更多
A new type of air bearing with flexure structure is introduced. The new bearing is designed for precision mechanical engineering devices such as mechanical watch movement. The new design uses the flexure structure to ...A new type of air bearing with flexure structure is introduced. The new bearing is designed for precision mechanical engineering devices such as mechanical watch movement. The new design uses the flexure structure to provide 3D damping to absorb shocks from all directions. Two designs are presented： one has 12 T-shape slots in the radian direction while the other has 8 spiral slots in the radian direction. Both designs have flexure mountings on the axial directions. Based on the finite element analysis （FEA）, the new bearing can reduce the vibration （displacement） by as much as 8.37% and hence, can better protect the shafts.展开更多
We present an advanced schematic arrangement of the radio-wave spectrometer with a few parallel optical arms for processing the data flow. This arrangement includes two principal novelties. First of them consists in t...We present an advanced schematic arrangement of the radio-wave spectrometer with a few parallel optical arms for processing the data flow. This arrangement includes two principal novelties. First of them consists in the proposed design, where each individual optical arm exhibits its original performances providing parallel multi-band observations within a few different scales simultaneously. These optical arms have the beam shapers providing both the needed incident light polarization and apodization to increase the dynamic range. After parallel acousto-optical processing, data flows of all the optical arms are united by the joint CCD matrix on the stage of the combined electronic data processing. The second novelty is in usage of unique wide-aperture bastron-based acousto-optical cell providing one of the best performances at the middle-frequencies (about 500 MHz) in comparison with the other available crystalline materials in this range. Such multi-band capabilities have a number of applications in astrophysical scenarios at different scales: from objects in the distant universe to planetary atmospheres in the Solar system. Thus one yields the united versatile instrument, which provides comprehensive studies of astrophysical objects simultaneously with precise synchronization in various frequency ranges.展开更多
Precisely analyzing the target materials in living cells can reveal the essence and mystery of life at a deeper level,which will provide reliable theoretical basis for the occurrence,development,treatment and prognosi...Precisely analyzing the target materials in living cells can reveal the essence and mystery of life at a deeper level,which will provide reliable theoretical basis for the occurrence,development,treatment and prognosis of major diseases.However,because living cells are in the dynamic process of metabolism,there are several challenges existed in accurate analysis,including subcellular compartment heterogeneity,plasma membrane interface barrier,and cell cycle regulation.In this regard,our group has designed and synthesized a series of multifunctional aggregates by mainly integrating the peptide elements,nucleic acid elements and aggregation elements to overcome the barriers.This article summarizes the latest developments of multifunctional aggregates for precise cell analysis by our group,and systematically introduces them according to different design concepts and targeting dimensions,such as space,efficiency as well as time.We hope this work could contribute to analyzing the biomarkers in cells through constructing the multifunctional aggregates,understanding the operation mechanism of cells,finally inspiring technology breakthroughs in biomedical fields.展开更多
Stewart platform(SP) is a promising choice for large component alignment, and interactive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation(P&...Stewart platform(SP) is a promising choice for large component alignment, and interactive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation(P&O) adjusting platform, based on an SP for force/torquedriven(F/T-driven) alignment, can dynamically measure interactive forces. This paper presents an analytical algorithm of measuring six-dimensional F/T based on the screw theory for accurate determination of external forces during alignment. Dynamic gravity deviations were taken into consideration and a compensation model was developed. The P&O number was optimized as well.Given the specific appearance of repeated six-dimensional F/T measurements, an approximate cone shape was used for spatial precision analysis. The magnitudes and directions of measured F/Ts can be evaluated by a set of standards, in terms of accuracy and repeatability. Experiments were also performed using a known applied load, and the proposed analytical algorithm was able to accurately predict the F/T. A comparison between precision analysis experiments with or without assembly fixtures was performed. Experimental results show that the measurement accuracy varies under different P&O sets and higher loads lead to poorer accuracy of dynamic gravity compensation. In addition, the preferable operation range has been discussed for high-precision assemblies with smaller deviations.展开更多
By using Schwarz alternating method, this paper presents asimplified alternating algorithm for the problems of two holes having arbitrary shapes and arrangements in an isotropic homogeneous linear elastic infinite reg...By using Schwarz alternating method, this paper presents asimplified alternating algorithm for the problems of two holes having arbitrary shapes and arrangements in an isotropic homogeneous linear elastic infinite region, and obtains stress and displacement fields for random times of iteration. After precision analysis it is found that the results for twenty times of iteration are of very high precision, and those with higher precision can be acquired if the iteration solving is further conducted. The comparison of the results from FEM further proves the reliability of the simplified alternating algorithm presented by this paper.展开更多
The low-frequency periodic error of star tracker is one of the most critical problems for high-accuracy satellite attitude determination.In this paper an approach is proposed to identify and compensate the low-frequen...The low-frequency periodic error of star tracker is one of the most critical problems for high-accuracy satellite attitude determination.In this paper an approach is proposed to identify and compensate the low-frequency periodic error for star tracker in attitude measurement.The analytical expression between the estimated gyro drift and the low-frequency periodic error of star tracker is derived firstly.And then the low-frequency periodic error,which can be expressed by Fourier series,is identified by the frequency spectrum of the estimated gyro drift according to the solution of the first step.Furthermore,the compensated model of the low-frequency periodic error is established based on the identified parameters to improve the attitude determination accuracy.Finally,promising simulated experimental results demonstrate the validity and effectiveness of the proposed method.The periodic error for attitude determination is eliminated basically and the estimation precision is improved greatly.展开更多
Obtaining high-precision,long-term sequences of vegetation water content(VWC)is of great significance for assessing surface vegetation growth,soil moisture,and fire risk.In recent years,the global navigation satellite...Obtaining high-precision,long-term sequences of vegetation water content(VWC)is of great significance for assessing surface vegetation growth,soil moisture,and fire risk.In recent years,the global navigation satellite system-interferometric reflection(GNSS-IR)has become a new type of remote sensing technology with low cost,all-weather capability,and a high temporal resolution.It has been widely used in the fields of snow depth,sea level,soil moisture content,and vegetation water content.The normalized microwave reflectance index(NMRI)based on GNSS-IR technology has been proven to be effective in monitoring changes in VWC.This paper considers the advantages and disadvantages of remote sensing technology and GNSS-IR technology in estimating VWC.A point-surface fusion method of GNSS-IR and MODIS data based on the GA-BP neural network is proposed to improve the accuracy of VWC estimation.The vegetation index products(NDVI,GPP,LAI)and the NMRI that unified the temporal and spatial resolution were used as the input and output data of the training model,and the GA-BP neural network was used for training and modeling.Finally,a spatially continuous NMRI product was generated.Taking a particular area of the United States as a research object,experiments show that(1)a neural network can realize the effective fusion of GNSS-IR and MODIS products.By comparing the GA-BP neural network,BP neural network,and multiple linear regression(MLR),the three models fusion effect.The results show that the GA-BP neural network has the best modeling effect,and the r and RMSE between the model estimation result and the reference value are 0.778 and 0.0332,respectively;this network is followed by the BP neural network,in which the r and RMSE are 0.746 and 0.0465,respectively.MLR has the poorest effect,with r and RMSE values of 0.500 and 0.0516,respectively.(2)The spatiotem-poral variation in the 16 days/500 m resolution NMRI product obtained by GA-BP neural network fusion is consistent with that in the experimental area.Through the testing of GNSS stations that did not participate in the modeling,the r between the estimated value of the NMRI and the reference value is greater than 0.87,and the RMSE is less than 0.049.Therefore,the method proposed in this paper is optional and effective.The spatially continuous NMRI products obtained by fusion can reflect the changes in VWC in the experimental area more intuitively.展开更多
文摘The field experiment designs with single replication were frequently used for factorial experiments in which the numbers of field plots were limited, but the experimental error was difficult to be estimated. To study a new statistical method for improving precision of regression analysis of such experiments in rice, 84 fertilizer experiments were conducted in 15 provinces of China, including Zhejiang, Jiangsu, Anhui, Hunan, Sichuan, Heilongjiang, etc. Three factors with 14 treatments (N: 0—225kg/ha, P: 0 —112. 5kg/ha, K: 0—150kg/ha) and two replications were employed using approaching optimun design. There were 2352 (84×14×2=2352) Yield deviations (d) between the individual treatment yields and its arithmetic mean. The results indicated that:
基金The National Natural Science Foundation ofChina (No.90715036)
文摘Three methods for calculating cable force （analytic method, fitting method and finite element method） are analyzed and compared. The effects of boundary condition, spectrum resolution, sampling time, and number of sampling points on the precision of cable force identification are discussed, and error analysis is conducted. The results of three methods applied to a practical project are significantly less than the design value. Comparatively, the result of finite element method is the closest to the design value. Moreover, their computational precision and error are compared and analyzed. The precision of frequency identification of cables, long cables in particular, is strongly affected by frequency resolution. If the frequency resolution is included in calculating the cable force, the identification error can be reduced greatly.
文摘This paper focuses on a strategic improving quality of＂high quality assurance CAE （computer aided engineering） analysis model＂ to be used in development design. The authors present a case oftransaxle oil seal leakage in automotive drive trains, a technical reliability problem that generates bottlenecks for auto manufacturers around the world. The application of this model is used to analyze cavitation caused by the metal particles （foreign matter） generated through transaxle wear. This analyzing method primarily uses numerical simulation （CAE） to clarify the technological mechanism generating oil leaks as a result of foreign metallic substances entering oil seals in the drive train. Quality improvement using this CAE analyzing method was verified by successfully applying it to the technological problem of development design bottlenecks at auto manufacturers.
基金supported by the National Natural Foundation of China(4106400141071294)+1 种基金the Natural Science Foundation of Guangxi(2012GXNSFAA053183)Guangxi Key Laboratory of Spatial Information and Geomatics(1103108-06)
文摘Tropospheric delay is a primary error source in earth observations and a variety of radio navigation technologies. In this paper, the relationship between zenith tropospheric delays and the elevation and longitude of stations is analyzed using the zenith tropospheric delay final products of International GNSS Service （IGS） stations from 2011. Two new models are proposed for estimating zenith tropospheric delays from regional CORS data without meteorological data. The proposed models are compared with the direct interpolation method and the remove-restore method using data from Guangxi CORS. The results show that the new models significantly improve the calculated precision. Finally, the root mean square （RMS） errors of the new models were used to estimate the surface precipitable water vapor （PWV） value at CORS station, which was determined to be less than 2 mm.
文摘A photoelectric equipment for inspecting artillery bore is composed of digital display grating sensor and data processing with computer.It can replace the traditional mechanical measurer and realize the automatic inspection of artillery bore.Introduced are briefly the working principles and analysis of this device.
文摘This thesis illustrates the method and precision of employing analytical photogrammetry to carry out similar materials model experiment in surveying the displacement of surveying points and analyzing the deformation law of rock layersand earths surface according to the results in the studying the deformation law of the earths surface caused by extracting mine coal underground.
基金Selected from Proceedings of the 7th International Conference on Frontiers of DesignManufacturing(ICFDM'2006)This project is partially sup-ported by the Research Grant from the Hong Kong Watch Manufacturers Association the Federation of Hong Kong Watch TradeIndustry Technology Commission China(No.ITS/001/05).
文摘A new type of air bearing with flexure structure is introduced. The new bearing is designed for precision mechanical engineering devices such as mechanical watch movement. The new design uses the flexure structure to provide 3D damping to absorb shocks from all directions. Two designs are presented： one has 12 T-shape slots in the radian direction while the other has 8 spiral slots in the radian direction. Both designs have flexure mountings on the axial directions. Based on the finite element analysis （FEA）, the new bearing can reduce the vibration （displacement） by as much as 8.37% and hence, can better protect the shafts.
文摘We present an advanced schematic arrangement of the radio-wave spectrometer with a few parallel optical arms for processing the data flow. This arrangement includes two principal novelties. First of them consists in the proposed design, where each individual optical arm exhibits its original performances providing parallel multi-band observations within a few different scales simultaneously. These optical arms have the beam shapers providing both the needed incident light polarization and apodization to increase the dynamic range. After parallel acousto-optical processing, data flows of all the optical arms are united by the joint CCD matrix on the stage of the combined electronic data processing. The second novelty is in usage of unique wide-aperture bastron-based acousto-optical cell providing one of the best performances at the middle-frequencies (about 500 MHz) in comparison with the other available crystalline materials in this range. Such multi-band capabilities have a number of applications in astrophysical scenarios at different scales: from objects in the distant universe to planetary atmospheres in the Solar system. Thus one yields the united versatile instrument, which provides comprehensive studies of astrophysical objects simultaneously with precise synchronization in various frequency ranges.
基金supported by the National Key R&D Program of China(2020YFA0211200)the National Natural Science Foundation of China(22090050,21974128,21874121,52003257)Hubei Provincial Natural Science Foundation of China(2019CFA043,2020CFA037)。
文摘Precisely analyzing the target materials in living cells can reveal the essence and mystery of life at a deeper level,which will provide reliable theoretical basis for the occurrence,development,treatment and prognosis of major diseases.However,because living cells are in the dynamic process of metabolism,there are several challenges existed in accurate analysis,including subcellular compartment heterogeneity,plasma membrane interface barrier,and cell cycle regulation.In this regard,our group has designed and synthesized a series of multifunctional aggregates by mainly integrating the peptide elements,nucleic acid elements and aggregation elements to overcome the barriers.This article summarizes the latest developments of multifunctional aggregates for precise cell analysis by our group,and systematically introduces them according to different design concepts and targeting dimensions,such as space,efficiency as well as time.We hope this work could contribute to analyzing the biomarkers in cells through constructing the multifunctional aggregates,understanding the operation mechanism of cells,finally inspiring technology breakthroughs in biomedical fields.
基金co-supported by the National Defense Basic Scientific Research (No. A2120132007)the Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing (No. SAMC14-JS-15-055)
文摘Stewart platform(SP) is a promising choice for large component alignment, and interactive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation(P&O) adjusting platform, based on an SP for force/torquedriven(F/T-driven) alignment, can dynamically measure interactive forces. This paper presents an analytical algorithm of measuring six-dimensional F/T based on the screw theory for accurate determination of external forces during alignment. Dynamic gravity deviations were taken into consideration and a compensation model was developed. The P&O number was optimized as well.Given the specific appearance of repeated six-dimensional F/T measurements, an approximate cone shape was used for spatial precision analysis. The magnitudes and directions of measured F/Ts can be evaluated by a set of standards, in terms of accuracy and repeatability. Experiments were also performed using a known applied load, and the proposed analytical algorithm was able to accurately predict the F/T. A comparison between precision analysis experiments with or without assembly fixtures was performed. Experimental results show that the measurement accuracy varies under different P&O sets and higher loads lead to poorer accuracy of dynamic gravity compensation. In addition, the preferable operation range has been discussed for high-precision assemblies with smaller deviations.
基金the National Natural Science Foundation of China (Grant No. 49772166).
文摘By using Schwarz alternating method, this paper presents asimplified alternating algorithm for the problems of two holes having arbitrary shapes and arrangements in an isotropic homogeneous linear elastic infinite region, and obtains stress and displacement fields for random times of iteration. After precision analysis it is found that the results for twenty times of iteration are of very high precision, and those with higher precision can be acquired if the iteration solving is further conducted. The comparison of the results from FEM further proves the reliability of the simplified alternating algorithm presented by this paper.
基金National Natural Science Foundation of China(61004081,11126033)School Advanced Research Foundation of National University of Defense Technology (JC11-02-22)
文摘The low-frequency periodic error of star tracker is one of the most critical problems for high-accuracy satellite attitude determination.In this paper an approach is proposed to identify and compensate the low-frequency periodic error for star tracker in attitude measurement.The analytical expression between the estimated gyro drift and the low-frequency periodic error of star tracker is derived firstly.And then the low-frequency periodic error,which can be expressed by Fourier series,is identified by the frequency spectrum of the estimated gyro drift according to the solution of the first step.Furthermore,the compensated model of the low-frequency periodic error is established based on the identified parameters to improve the attitude determination accuracy.Finally,promising simulated experimental results demonstrate the validity and effectiveness of the proposed method.The periodic error for attitude determination is eliminated basically and the estimation precision is improved greatly.
基金the National Natural Science Foundation of China(Grant Nos.41901409,41461089)the Guangxi Young and Middle-aged Teacher Basic Ability Improvement Project(Grant No.2018KY0247).
文摘Obtaining high-precision,long-term sequences of vegetation water content(VWC)is of great significance for assessing surface vegetation growth,soil moisture,and fire risk.In recent years,the global navigation satellite system-interferometric reflection(GNSS-IR)has become a new type of remote sensing technology with low cost,all-weather capability,and a high temporal resolution.It has been widely used in the fields of snow depth,sea level,soil moisture content,and vegetation water content.The normalized microwave reflectance index(NMRI)based on GNSS-IR technology has been proven to be effective in monitoring changes in VWC.This paper considers the advantages and disadvantages of remote sensing technology and GNSS-IR technology in estimating VWC.A point-surface fusion method of GNSS-IR and MODIS data based on the GA-BP neural network is proposed to improve the accuracy of VWC estimation.The vegetation index products(NDVI,GPP,LAI)and the NMRI that unified the temporal and spatial resolution were used as the input and output data of the training model,and the GA-BP neural network was used for training and modeling.Finally,a spatially continuous NMRI product was generated.Taking a particular area of the United States as a research object,experiments show that(1)a neural network can realize the effective fusion of GNSS-IR and MODIS products.By comparing the GA-BP neural network,BP neural network,and multiple linear regression(MLR),the three models fusion effect.The results show that the GA-BP neural network has the best modeling effect,and the r and RMSE between the model estimation result and the reference value are 0.778 and 0.0332,respectively;this network is followed by the BP neural network,in which the r and RMSE are 0.746 and 0.0465,respectively.MLR has the poorest effect,with r and RMSE values of 0.500 and 0.0516,respectively.(2)The spatiotem-poral variation in the 16 days/500 m resolution NMRI product obtained by GA-BP neural network fusion is consistent with that in the experimental area.Through the testing of GNSS stations that did not participate in the modeling,the r between the estimated value of the NMRI and the reference value is greater than 0.87,and the RMSE is less than 0.049.Therefore,the method proposed in this paper is optional and effective.The spatially continuous NMRI products obtained by fusion can reflect the changes in VWC in the experimental area more intuitively.
