The effectiveness of preozonation was evaluated on treating a bromide-bearing dam source water in south China through batch-scale experiments. Preozonation at ozone doses of 0.5-1.0 mg/L （at ozone consumption base） ...The effectiveness of preozonation was evaluated on treating a bromide-bearing dam source water in south China through batch-scale experiments. Preozonation at ozone doses of 0.5-1.0 mg/L （at ozone consumption base） enhanced total organic carbon （TOC） removal through coagulation, and resulted in an almost linear reduction of ultraviolet absorbance at 254 nm （LW2s4）. The removals of TOC （after coagulation） and UV254 at the ozone dose of 1.0 mg/L were 36% and 70%, respectively. Preozonation at an ozone dose between 0.5 and 1.0 mg/L resulted in the removal of disinfection byproducts formation potential （DBFP） including trihalomethane formation potential （THMFP） and haloacetic acid formation potential （HAAFP） for about 50%. The removals of THMFP and HAAFP decreased with the further increase of ozone dose. Ozonation of bromide-bearing water （bromide concentration, 34 μg/L） produced a bromate concentration under the detection limit（2μg/L） at ozone doses 〈1.5 mg/L. However, bromate 〉10μg/L could be produced when the bromide concentration was increased to 96 μg/L.展开更多
Orthogonal method was adopted to optimize the preozonation process and to minimize the bromate formation. Factors such as contact time, pH and ammonia concentration were investigated by orthogonal experiments to under...Orthogonal method was adopted to optimize the preozonation process and to minimize the bromate formation. Factors such as contact time, pH and ammonia concentration were investigated by orthogonal experiments to understand the interaction of various operation conditions on the formation of bromate and other disinfection byproducts(DBPs). Results showed that pH had the most significant influence on the minimization of bromate formation. The factors influencing the formation of bromate were in order of pH > contact time > ammonia concentration. For the formation of trihalomethanes(THMs) and haloacetic acids(HAAs), however, contact time significantly influenced their formation potential. In the practical preozonation process of waterworks, it is appropriate to set preozonation contact time to be 20 min. In order to minimize the formation of bromate, pH value of the raw water should be adjusted to 6. 0, and a certain concentration of ammonia could be added into the water to strengthen the minimization effect when the concentration of bromide in the raw water is higher than that in the experimental water.展开更多
Comparative pilot tests were conducted to investigate the coagulation-aid effects of the combined preoxidation by potassium permanganate composites （PPC） with chlorine and preozonation. And the synergistie mechanism...Comparative pilot tests were conducted to investigate the coagulation-aid effects of the combined preoxidation by potassium permanganate composites （PPC） with chlorine and preozonation. And the synergistie mechanism of combined preoxidation was discussed. Results showed that 1.0 mg/L PPC with 2. 0 mg/L chlorine could further improve the quality of treated water, as indicated by residual turbidity, TOC and algae. The enhanced efficiency could be explained by the synergistic effect of the preoxidants themselves, or the effect of chlorine and the intermediate such as hydrous manganese dioxide, which was generated by potassium permanga- nate, the main ingredient of PPC.展开更多
The combination of preozonation and subsequent biological granular activated carbon （O3/BAC） filtration is well known as a promising method for the removal of many pollutants. Temperature and nutrients are the domin...The combination of preozonation and subsequent biological granular activated carbon （O3/BAC） filtration is well known as a promising method for the removal of many pollutants. Temperature and nutrients are the dominant factors in external conditions to influence the biological communities. To explore the influence of preozonation under low temperature, the factors such as dissolved oxygen （DO）, dissolved organic carbon （DOC） and NH4^＋-N were analyzed from the sampling ports every week; triphenyl tetrazolium ehloride-dehydrogenase activity （TTC-DHA） and the nitrifying activity were detected along the bed height ofbiofilter at four levels （10. 40. 70 and i 10 cm） on the 90th, 110th, and 130th day; ~nicrobial community, based on 16S rRNA gene-denaturing gradient gel electrophoresis （DGGE）, was monitored on the 130th day of the operation. The observed microbial property showed that preozonation had a positive influence on bioactivity, biomass and nitrifying activity. Community analysis showed no significant difference on the biodiversity of nitrifying bacteria between the parallel filters in the inlet end based on the method employed. This result showed that biofilters＇ performance is not correlated well with microbial biodiversity. The elevated functionality in O3/BAC filters can be a result of increased microbial activity, which was promoted by preozonation.展开更多
文摘The effectiveness of preozonation was evaluated on treating a bromide-bearing dam source water in south China through batch-scale experiments. Preozonation at ozone doses of 0.5-1.0 mg/L （at ozone consumption base） enhanced total organic carbon （TOC） removal through coagulation, and resulted in an almost linear reduction of ultraviolet absorbance at 254 nm （LW2s4）. The removals of TOC （after coagulation） and UV254 at the ozone dose of 1.0 mg/L were 36% and 70%, respectively. Preozonation at an ozone dose between 0.5 and 1.0 mg/L resulted in the removal of disinfection byproducts formation potential （DBFP） including trihalomethane formation potential （THMFP） and haloacetic acid formation potential （HAAFP） for about 50%. The removals of THMFP and HAAFP decreased with the further increase of ozone dose. Ozonation of bromide-bearing water （bromide concentration, 34 μg/L） produced a bromate concentration under the detection limit（2μg/L） at ozone doses 〈1.5 mg/L. However, bromate 〉10μg/L could be produced when the bromide concentration was increased to 96 μg/L.
基金Supported by the National Natural Science Foundation of China(No.51008162)Natural Science Foundation of Tianjin(No.10JCYBJC03500)
文摘Orthogonal method was adopted to optimize the preozonation process and to minimize the bromate formation. Factors such as contact time, pH and ammonia concentration were investigated by orthogonal experiments to understand the interaction of various operation conditions on the formation of bromate and other disinfection byproducts(DBPs). Results showed that pH had the most significant influence on the minimization of bromate formation. The factors influencing the formation of bromate were in order of pH > contact time > ammonia concentration. For the formation of trihalomethanes(THMs) and haloacetic acids(HAAs), however, contact time significantly influenced their formation potential. In the practical preozonation process of waterworks, it is appropriate to set preozonation contact time to be 20 min. In order to minimize the formation of bromate, pH value of the raw water should be adjusted to 6. 0, and a certain concentration of ammonia could be added into the water to strengthen the minimization effect when the concentration of bromide in the raw water is higher than that in the experimental water.
基金Sponsored by the Development Program for Outstanding Young Teachers in Harbin Institute of Technology (Grant No.HITQNJS.2008.042)State KeyLab of Urban Water Resource and Environment(Grant No. HIT.ES200803)Harbin Science and Technology Development Program for Young Innovative Scholars(Grant No.2009RFQXS010)
文摘Comparative pilot tests were conducted to investigate the coagulation-aid effects of the combined preoxidation by potassium permanganate composites （PPC） with chlorine and preozonation. And the synergistie mechanism of combined preoxidation was discussed. Results showed that 1.0 mg/L PPC with 2. 0 mg/L chlorine could further improve the quality of treated water, as indicated by residual turbidity, TOC and algae. The enhanced efficiency could be explained by the synergistic effect of the preoxidants themselves, or the effect of chlorine and the intermediate such as hydrous manganese dioxide, which was generated by potassium permanga- nate, the main ingredient of PPC.
文摘The combination of preozonation and subsequent biological granular activated carbon （O3/BAC） filtration is well known as a promising method for the removal of many pollutants. Temperature and nutrients are the dominant factors in external conditions to influence the biological communities. To explore the influence of preozonation under low temperature, the factors such as dissolved oxygen （DO）, dissolved organic carbon （DOC） and NH4^＋-N were analyzed from the sampling ports every week; triphenyl tetrazolium ehloride-dehydrogenase activity （TTC-DHA） and the nitrifying activity were detected along the bed height ofbiofilter at four levels （10. 40. 70 and i 10 cm） on the 90th, 110th, and 130th day; ~nicrobial community, based on 16S rRNA gene-denaturing gradient gel electrophoresis （DGGE）, was monitored on the 130th day of the operation. The observed microbial property showed that preozonation had a positive influence on bioactivity, biomass and nitrifying activity. Community analysis showed no significant difference on the biodiversity of nitrifying bacteria between the parallel filters in the inlet end based on the method employed. This result showed that biofilters＇ performance is not correlated well with microbial biodiversity. The elevated functionality in O3/BAC filters can be a result of increased microbial activity, which was promoted by preozonation.
