This study assessed the effect of patch scarification and mounding on the physical properties of the root layer and the success of tree planting in various types of forests.This study was conducted on 12 forest sites ...This study assessed the effect of patch scarification and mounding on the physical properties of the root layer and the success of tree planting in various types of forests.This study was conducted on 12 forest sites in taiga forests of the European part of Russia.A total of 54 plots were set up to assess seedling survival;root collar diameter,height,and heigh increment were measured for 240 seedlings to assess growth.In the rooting layer,240 soil samples were taken to determine physical properties.The study showed that soil treatment methods had no effect on bulk density and total porosity in Cladina sites.However,reduced soil moisture was noted,particularly in mounds,resulting in increased aeration.In Myrtillus sites,there were increased bulk density,reduced soil moisture,and total porosity in the mounds.Mounding treatment in Polytrichum sites resulted in reduced soil moisture and increased aeration porosity.In the Myrtillus and Polytrichum sites,patch scarification had no effects on physical properties.In Polytrichum sites,survival rates,heights,and heigh increments of bareroot Norway spruce seedlings in mounds were higher than in patches;however,the same did not apply to diameter.In Cladina and Myrtillus sites,there was no difference in growth for bareroot and containerised seedlings with different soil treatments.Growing conditions and soil types should be considered when applying different soil treatment methods to ensure high survival rates and successful seedling growth.展开更多
As a ceramic material,AlN has very good thermophysical and mechanical properties.In addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of Mg.Therefore,AlN is an...As a ceramic material,AlN has very good thermophysical and mechanical properties.In addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of Mg.Therefore,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing attention.This review addresses the development of preparation technologies for AlN-reinforced Mg matrix composites.The mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ methods.In addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.展开更多
Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to t...Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.展开更多
We discuss a quantum remote state preparation protocol by which two parties, Alice and Candy, prepare a single-qubit and a two-qubit state, respectively, at the site of the receiver Bob. The single-qubit state is know...We discuss a quantum remote state preparation protocol by which two parties, Alice and Candy, prepare a single-qubit and a two-qubit state, respectively, at the site of the receiver Bob. The single-qubit state is known to Alice while the two-qubit state which is a non-maximally entangled Bell state is known to Candy. The three parties are connected through a single entangled state which acts as a quantum channel. We first describe the protocol in the ideal case when the entangled channel under use is in a pure state. After that, we consider the effect of amplitude damping(AD) noise on the quantum channel and describe the protocol executed through the noisy channel. The decrement of the fidelity is shown to occur with the increment in the noise parameter. This is shown by numerical computation in specific examples of the states to be created. Finally, we show that it is possible to maintain the label of fidelity to some extent and hence to decrease the effect of noise by the application of weak and reversal measurements. We also present a scheme for the generation of the five-qubit entangled resource which we require as a quantum channel. The generation scheme is run on the IBMQ platform.展开更多
Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely comme...Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.展开更多
Dear Editor,We report a case of band keratopathy who experienced several ocular surgeries,secondary uveitis and glaucoma which eventually led to severe band keratopathy.We use commonly-used vacuum blood collection tub...Dear Editor,We report a case of band keratopathy who experienced several ocular surgeries,secondary uveitis and glaucoma which eventually led to severe band keratopathy.We use commonly-used vacuum blood collection tubes with ethylenediaminetetraacetic acid dipotassium salt(EDTA-K2)to prepare chelation solution on-spot to remove the calcium deposits on the corneal surface.It is proved to be relatively safety,efficacy,cost-effective.展开更多
The importance of the accuracy of preparing biological specimen as histological sections that can be examined under a microscope lies in reflecting a true image of the tissue that includes all its components, which ar...The importance of the accuracy of preparing biological specimen as histological sections that can be examined under a microscope lies in reflecting a true image of the tissue that includes all its components, which are used in scientific research or for the purpose of diagnosing various diseases of the body. Despite this, some cellular structures within the tissue may suffer from some alterations that result from the appearance of defects during any stage of preparing these microscopic sections, which alter or interfere with the precise cellular structures and morphology that constitute the tissue and thus give a different image for tissue features and cause confusion in the work histopathologist in the diagnosis. There are several reasons that can cause a misdiagnosis of the sample that occurs during the surgical separation process or after separation during the stages of microscopic preparation techniques from fixation stage, tissue processing, embedding or microtomy, staining until mounting procedures. The constant need to identify these defects and their causes in addition to try to reduce them is one of the biggest challenges evident in pathology laboratories. Therefore, this study aims to review the most common defects that occur in any stage of tissue processing, with an explanation of their causes and appropriate ways to avoid them.展开更多
Colorectal cancer ranks third in the global cancer data in 2020.Colorectal scope is the most effective method to diagnose colorectal diseases such as benign and malignant colorectal tumors.The poor quality of intestin...Colorectal cancer ranks third in the global cancer data in 2020.Colorectal scope is the most effective method to diagnose colorectal diseases such as benign and malignant colorectal tumors.The poor quality of intestinal preparation causes an increased rate of missed diagnosis of colorectal tumors,reduces the rate of cecal intubation for colorectal examination,increases the discomfort,and reduces the compliance of re-examination.Therefore,we should try our best to improve the quality of intestinal preparation.This study reviewed the latest advances related to the preoperative preparation for colonoscopy.Recent research shows that smartphone apps can provide more detailed education and guidance on bowel preparation;Pre-packaged foods are more suitable as a way to eat before colonoscopy.The use of smaller doses,better taste of cathartic agents,and some auxiliary measures,combined with the patient’s situation to provide personalized intestinal preparation measures to improve the quality of intestinal preparation.Starting from the quality of colonoscopy bowel preparation,continuous improvement of patients’tolerance to bowel preparation,continuous improvement of bowel preparation plan based on individual factors’needs,and better communication with examined subjects by using existing scientific information technology,may be the hot spot of colonoscopy bowel preparation research in the next few years.展开更多
Objective:To strengthen preoperative preparation management and reduce preoperative preparation defects.Methods:We set up a special medical care management team to investigate the preoperative preparation in surgical ...Objective:To strengthen preoperative preparation management and reduce preoperative preparation defects.Methods:We set up a special medical care management team to investigate the preoperative preparation in surgical departments,analyze the causes of the shortcomings in preoperative preparation,and propose countermeasures.The medical staff jointly formulated plans related to preoperative preparation management including clear outline of responsibilities,strengthening of training,integrated medical care,timely feedback,and continuous improvement.Besides,the preoperative preparation of patients before and after the improvement measures were compared using statistical analysis.Results:The rate of inadequate preoperative preparation was 11.14 per thousand before the integrated management model was implemented.After the implementation of the integrated management model,the rate of inadequate preoperative preparation decreased to 2.99 per thousand,and the difference was statistically(P<0.05).Conclusion:The integrated management of preoperative preparation can help reduce the rate of preoperative complications and ensure the safety of surgery.展开更多
An adequate bowel preparation in patients with inflammatory bowel disease(IBD)is a prerequisite for successful colonoscopy for screening,diagnosis,and surveillance.Several bowel preparation formulations are available,...An adequate bowel preparation in patients with inflammatory bowel disease(IBD)is a prerequisite for successful colonoscopy for screening,diagnosis,and surveillance.Several bowel preparation formulations are available,both high-and low-volume based on polyethylene glycol.Generally,low-volume formulations are also based on several compounds such as magnesium citrate preparations with sodium picosulphate,oral sulphate solution,and oral sodium phosphatebased solutions.Targeted studies on the quality of bowel preparation prior to colonoscopy in the IBD population are still required,with current evidence from existing studies being inconclusive.New frontiers are also moving towards the use of alternatives to anterograde ones,using preparations based on retrograde colonic lavage.展开更多
Mg/Al bimetal combines the advantages of both aluminum and magnesium and has broad application prospects in automotive, aerospace,weapons, digital products and so on. The compound casting has the characteristics of lo...Mg/Al bimetal combines the advantages of both aluminum and magnesium and has broad application prospects in automotive, aerospace,weapons, digital products and so on. The compound casting has the characteristics of low cost, easy to achieve metallurgical combination and suitable for the preparation of complex bimetallic parts. However, bimetallic joint strength is low due to differences of physical properties between Al and Mg, oxide film on metallic surface and interfacial Al-Mg IMCs, which is closely related to the interfacial microstructure and properties. Therefore, how to control the interface of the bimetal to achieve performance enhancement is the focus and difficulty in this field. At present, there are mainly the following strengthening methods. First, the “zincate galvanizing” and “electrolytic polishing+anodic oxidation” technology were exert on the surface of Al alloy to remove and break the oxide film, which improved the wettability between Al and Mg. Second, the undesirable Al-Mg IMCs were reduce or elimination by adding the interlayers(Zn, Ni and Ni-Cu). Thirdly, the evolution process of interfacial microstructure was changed and fine strengthening phases were formed by adding Si element to Al alloy or rare earth element to Mg alloy. Fourthly, mechanical vibration and ultrasonic vibration were applied in the process of the filling and solidification to refine and homogenize the interfacial structure. Finally, some other methods, including secondary rolling, thermal modification, heat treatment and constructing exterior 3D morphology, also can be used to regulate the interfacial microstructure and compositions. The above strengthening methods can be used alone or in combination to achieve bimetallic strengthening. Finally, the future development direction of the Mg/Al bimetal is prospected, which provides some new ideas for the development and application of the Mg/Al bimetal.展开更多
Adequate bowel cleansing is critical for a high-quality colonoscopy because it affects diagnostic accuracy and adenoma detection.Nevertheless,almost a quarter of procedures are still carried out with suboptimal prepar...Adequate bowel cleansing is critical for a high-quality colonoscopy because it affects diagnostic accuracy and adenoma detection.Nevertheless,almost a quarter of procedures are still carried out with suboptimal preparation,resulting in longer procedure times,higher risk of complications,and higher likelihood of missing lesions.Current guidelines recommend high-volume or low-volume polyethylene glycol(PEG)/non-PEG-based split-dose regimens.In patients who have had insufficient bowel cleansing,the colonoscopy should be repeated the same day or the next day with additional bowel cleansing as a salvage option.A strategy that includes a prolonged low-fiber diet,a split preparation regimen,and a colonoscopy within 5 h of the end of preparation may increase cleansing success rates in the elderly.Furthermore,even though no specific product is specifically recommended in the other cases for difficult-to-prepare patients,clinical evidence suggests that 1-L PEG plus ascorbic acid preparation are associated with higher cleansing success in hospitalized and inflammatory bowel disease patients.Patients with severe renal insufficiency(creatinine clearance<30 mL/min)should be prepared with isotonic high volume PEG solutions.Few data on cirrhotic patients are currently available,and no trials have been conducted in this population.An accurate characterization of procedural and patient variables may lead to a more personalized approach to bowel preparation,especially in patients undergoing resection of left colon lesions,where intestinal preparation has a poor outcome.The purpose of this review was to summarize the evidence on the risk factors influencing the quality of bowel cleansing in difficult-to-prepare patients,as well as strategies to improve colonoscopy preparation in these patients.展开更多
Patients with inflammatory bowel diseases(IBDs)require repeated endoscopic evaluations over time by colonoscopy to weigh disease activity but also for different and additional indications(e.g.,evaluation of postoperat...Patients with inflammatory bowel diseases(IBDs)require repeated endoscopic evaluations over time by colonoscopy to weigh disease activity but also for different and additional indications(e.g.,evaluation of postoperative recurrence,colorectal cancer surveillance).Colonoscopy,however,requires adequate bowel preparation to be of quality.The latter is achieved as long as the patient takes a certain amount of product to have a number of bowel movements suitable to clean the colon and allow optimal visualization of the mucosa during endoscopy.However,significant guidelines recommend preparations for patients with IBD not excelling in palatability.This recommendation originates from the fact that most of the studies conducted on bowel preparations in patients with IBD have been done with isosmolar preparations based on polyethylene glycol(PEG),for which,therefore,more safety data exist.As a result,the low-volume non-PEG preparations(e.g.,magnesium citrate plus picosulphate,oral sulphate solutions)have been set aside for the whole range of warnings to be heeded because of their hyperosmolarity.New studies,however,are emerging,leaning in overall for a paradigm shift in this matter.Indeed,such non-PEG preparations seem to show a particularly encouraging and engaging safety profile when considering their broad potential for tolerability and patient preference.Indeed,such evidence is insufficient to indicate such preparations in all patients with IBD but may pave the way for those with remission or well-controlled disease.This article summarizes the central studies conducted in IBD settings using non-PEG preparations by discussing their results.展开更多
BACKGROUND Adequate bowel preparation is critical for colonoscopy screening.At present,the most widely used intestinal cleaner recommended at home and abroad is Polyethylene glycol(PEG).Intestinal cleansers can cause ...BACKGROUND Adequate bowel preparation is critical for colonoscopy screening.At present,the most widely used intestinal cleaner recommended at home and abroad is Polyethylene glycol(PEG).Intestinal cleansers can cause electrolyte disturbances and hyponatremia.However,hyponatremic encephalopathy due to hyponatremia induced by PEG solution,although rare,can lead to serious irreversible sequelae and even death.CASE SUMMARY In this report,we discuss a case of neurological dysfunction due to hyponatremia,also known as hyponatremic encephalopathy,observed in a 63-year-old woman who underwent PEG-based bowel preparation for colonoscopy.She was eventually transferred to our intensive care unit for treatment due to her Glasgow Coma Scale score of 9/15(Eye opening 2;Verbal response 1;Motor response 6)and abnormal laboratory tests.CONCLUSION Physicians should be thoroughly familiarized with the patient’s history before prescribing PEG for bowel preparation,and timely identification of patients with hyponatremic encephalopathy is essential as delayed treatment is associated with poor neurological outcomes.An intravenous infusion of 3%sodium chloride is recommended at the onset of early symptoms.The goal of treatment is to adequately treat cerebral edema while avoiding serum sodium correction beyond 15 to 20 m Eq/L within 48 h of treatment to prevent osmotic demyelination syndrome.展开更多
With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance an...With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance and durability.Polyurethane(PU)has been used in asphalt pavement engineering to enhance the durability and service life of asphalt pavement because of its excellent high-temperature performance,toughness,wear resistance,aging resistance and oil resistance.However,PU modified asphalt technology is still in the exploratory stage.The preparation,modification mechanism and working performances of PU modified asphalt need to be further clarified.Therefore,this paper summarized the research progress of PU modified asphalt and its mixture.The composition of PU modified asphalt was introduced.The addition methods of PU materials and preparation process parameters of the PU modified asphalt were determined.The modification mechanism of PU on asphalt was discussed.The effects of polyurethane on asphalt were analyzed and the road performances of its mixture were evaluated.Finally,the development tendency towards PU modified asphalt and its mixture were forecasted.展开更多
In the past few decades,microbubble flotation has been widely studied in the separation and beneficiation of fine minerals.Compared with conventional flotation,microbubble flotation has obvious advantages,such as high...In the past few decades,microbubble flotation has been widely studied in the separation and beneficiation of fine minerals.Compared with conventional flotation,microbubble flotation has obvious advantages,such as high grade and recovery and low consumption of flotation reagents.This work systematically reviews the latest advances and research progress in the flotation of fine mineral particles by microbubbles.In general,microbubbles have small bubble size,large specific surface area,high surface energy,and good selectivity and can also easily be attached to the surface of hydrophobic particles or large bubbles,greatly reducing the detaching probability of particles from bubbles.Microbubbles can be prepared by pressurized aeration and dissolved air,electrolysis,ultrasonic cavitation,photocatalysis,solvent exchange,temperature difference method(TDM),and Venturi tube and membrane method.Correspondingly,equipment for fine-particle flotation is categorized as microbubble release flotation machine,centrifugal flotation column,packed flotation column,and magnetic flotation machine.In practice,microbubble flotation has been widely studied in the beneficiation of ultrafine coals,metallic minerals,and nonmetallic minerals and exhibited superiority over conventional flotation machines.Mechanisms underpinning the promotion of fine-particle flotation by nanobubbles include the agglomeration of fine particles,high stability of nanobubbles in aqueous solutions,and enhancement of particle hydrophobicity and flotation dynamics.展开更多
A chiral low-molecular-weight gelator(LMWG) L-16Ala5PyPF6 was synthesized from L-alanine, which can cause physical gel in n-propanol, ethyl acetate, butylene oxide, water, benzene, 1,4-dioxane and chloroform. The sol-...A chiral low-molecular-weight gelator(LMWG) L-16Ala5PyPF6 was synthesized from L-alanine, which can cause physical gel in n-propanol, ethyl acetate, butylene oxide, water, benzene, 1,4-dioxane and chloroform. The sol-gel reactions were carried out in a mixture of stronger ammonia water and n-propanol at the volume ratio of 2:8. Single-handed twisted silica nanostructures with pore channels vertical to the wall surfaces were first prepared through a single-templating approach comparing with the reported double template method. The formation mechanism of radial pore structure was studied by transmission electron microscopy at different reaction time intervals, which indicated that the radial pore structure was formed via a structural transition in the sol-gel transcription process.展开更多
Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The m...Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The morphologies and pore sizes of silicas are adjustable by changing the type and amount of solvents in the reaction systems.With the increase of the organic solvent content,the morphologies of the obtained silica changed from nanospheres with vertical pore structures to nanosheets structures.When 1 mL of benzene,cyclohexane or toluene were used as solvents,only silica nanospheres were obtained,the BET surface areas of silica nanospheres reached 600.7,669.5,and 560.8 m^(2)/g,respectively.The pore sizes were 3.51,3.54,and 3.46 nm,respectively.Significantly,these ordered silica nanospheres/poly(vinyl alcohol-co-ethylene)(PVAco-PE)nanofiber membranes have high separation efficiencies(>99%)for n-hexane/water mixtures.展开更多
We investigate the influence of a noisy environment on the remote preparation of the multi-qubit equatorial state, and specifically deduce the final states and fidelities of the remote preparation of the three-qubit a...We investigate the influence of a noisy environment on the remote preparation of the multi-qubit equatorial state, and specifically deduce the final states and fidelities of the remote preparation of the three-qubit and four-qubit equatorial states under diverse types of noisy environments, namely, amplitude damping, bit flip, phase damping, phase flip, bit-phase flip,depolarization, and non-Markov environments. The results show that when the decoherence factors of the front six noises are equal, the influence degrees of phase damped noise, bit flip noise, phase flip noise, and bit-phase flip noise are similar,while the information loss caused by the amplitude damped noise and depolarizing noise is less. In particular, the bit flip noise and depolarizing noise may have more complex effects on the remote state preparation(RSP) schemes depending on the phase information of the target states, even for the ideal cases where the fidelity values are always 1 for specific phase relations. In the non-Markov environment, owing to the back and forth of information between the environment and systems, fidelities exhibit oscillating behavior and the minimum value may stay greater than zero for a long evolutionary time. These results are expected to have potential applications for understanding and avoiding the influence of noise on remote quantum communication and quantum networks.展开更多
Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons.Due to their excellent optical,electrical and magnetic properties,their advantages and potential for app...Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons.Due to their excellent optical,electrical and magnetic properties,their advantages and potential for applications in the above areas are gradually emerging.Therefore,an increasing number of researchers have focused on photonic crystals.In this paper,the characteristics of biological photonic crystal structures,such as those found in butterfly wings,sea mouse bristles,peacock feathers,melon jellyfish epidermal cells,and weevil exoskeletons,are described.The preparation methods of photonic crystals are systematically summarized(including the template method,self-assembly technology,electron beam evaporation coating technology,chemical vapor deposition technology,femtosecond laser two-photon technology,spin coating technology,and a variety of technology mixing),and the characteristics,advantages,and disadvantages of the different methods are compared.Furthermore,the development of photonic crystals in the field of sensors,solar cells,filters,and infrared stealth is discussed,demonstrateing the great development potential of photonic crystals.It is concluded that the realization of photonic crystals with high precision,high sensitivity,angle independence,and large-area uniform preparation is a key problem requiring urgent solution.Moreover,photonic crystals have potential development prospects in the fields of equipment stealth,new concept weapons,production,an daily life.展开更多
基金based on studies conducted under a governmental request to“Northern Research Institute of Forestry”for performance of applied research within the remit of the Federal Forestry Agency.Project registration No.122020100319-9。
文摘This study assessed the effect of patch scarification and mounding on the physical properties of the root layer and the success of tree planting in various types of forests.This study was conducted on 12 forest sites in taiga forests of the European part of Russia.A total of 54 plots were set up to assess seedling survival;root collar diameter,height,and heigh increment were measured for 240 seedlings to assess growth.In the rooting layer,240 soil samples were taken to determine physical properties.The study showed that soil treatment methods had no effect on bulk density and total porosity in Cladina sites.However,reduced soil moisture was noted,particularly in mounds,resulting in increased aeration.In Myrtillus sites,there were increased bulk density,reduced soil moisture,and total porosity in the mounds.Mounding treatment in Polytrichum sites resulted in reduced soil moisture and increased aeration porosity.In the Myrtillus and Polytrichum sites,patch scarification had no effects on physical properties.In Polytrichum sites,survival rates,heights,and heigh increments of bareroot Norway spruce seedlings in mounds were higher than in patches;however,the same did not apply to diameter.In Cladina and Myrtillus sites,there was no difference in growth for bareroot and containerised seedlings with different soil treatments.Growing conditions and soil types should be considered when applying different soil treatment methods to ensure high survival rates and successful seedling growth.
基金supported by the National Natural Science Foundation of China(Nos.52175321,and 51771080).
文摘As a ceramic material,AlN has very good thermophysical and mechanical properties.In addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of Mg.Therefore,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing attention.This review addresses the development of preparation technologies for AlN-reinforced Mg matrix composites.The mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ methods.In addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.
基金supported by the National Natural Science Foundation of China(22179089)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX23_3245)support from Suzhou Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies,Suzhou,China。
文摘Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.
基金Project supported by Indian Institute of Engineering Science and Technology, Shibpur, India
文摘We discuss a quantum remote state preparation protocol by which two parties, Alice and Candy, prepare a single-qubit and a two-qubit state, respectively, at the site of the receiver Bob. The single-qubit state is known to Alice while the two-qubit state which is a non-maximally entangled Bell state is known to Candy. The three parties are connected through a single entangled state which acts as a quantum channel. We first describe the protocol in the ideal case when the entangled channel under use is in a pure state. After that, we consider the effect of amplitude damping(AD) noise on the quantum channel and describe the protocol executed through the noisy channel. The decrement of the fidelity is shown to occur with the increment in the noise parameter. This is shown by numerical computation in specific examples of the states to be created. Finally, we show that it is possible to maintain the label of fidelity to some extent and hence to decrease the effect of noise by the application of weak and reversal measurements. We also present a scheme for the generation of the five-qubit entangled resource which we require as a quantum channel. The generation scheme is run on the IBMQ platform.
基金This work was supported by the National Natural Science Foundation of China(52203066,51973157,61904123)the Tianjin Natural Science Foundation(18JCQNJC02900)+3 种基金the National innovation and entrepreneurship training program for college students(202310058007)the Tianjin Municipal college students’innovation and entrepreneurship training program(202310058088)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(Grant No.2018KJ196)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University.
文摘Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.
文摘Dear Editor,We report a case of band keratopathy who experienced several ocular surgeries,secondary uveitis and glaucoma which eventually led to severe band keratopathy.We use commonly-used vacuum blood collection tubes with ethylenediaminetetraacetic acid dipotassium salt(EDTA-K2)to prepare chelation solution on-spot to remove the calcium deposits on the corneal surface.It is proved to be relatively safety,efficacy,cost-effective.
文摘The importance of the accuracy of preparing biological specimen as histological sections that can be examined under a microscope lies in reflecting a true image of the tissue that includes all its components, which are used in scientific research or for the purpose of diagnosing various diseases of the body. Despite this, some cellular structures within the tissue may suffer from some alterations that result from the appearance of defects during any stage of preparing these microscopic sections, which alter or interfere with the precise cellular structures and morphology that constitute the tissue and thus give a different image for tissue features and cause confusion in the work histopathologist in the diagnosis. There are several reasons that can cause a misdiagnosis of the sample that occurs during the surgical separation process or after separation during the stages of microscopic preparation techniques from fixation stage, tissue processing, embedding or microtomy, staining until mounting procedures. The constant need to identify these defects and their causes in addition to try to reduce them is one of the biggest challenges evident in pathology laboratories. Therefore, this study aims to review the most common defects that occur in any stage of tissue processing, with an explanation of their causes and appropriate ways to avoid them.
文摘Colorectal cancer ranks third in the global cancer data in 2020.Colorectal scope is the most effective method to diagnose colorectal diseases such as benign and malignant colorectal tumors.The poor quality of intestinal preparation causes an increased rate of missed diagnosis of colorectal tumors,reduces the rate of cecal intubation for colorectal examination,increases the discomfort,and reduces the compliance of re-examination.Therefore,we should try our best to improve the quality of intestinal preparation.This study reviewed the latest advances related to the preoperative preparation for colonoscopy.Recent research shows that smartphone apps can provide more detailed education and guidance on bowel preparation;Pre-packaged foods are more suitable as a way to eat before colonoscopy.The use of smaller doses,better taste of cathartic agents,and some auxiliary measures,combined with the patient’s situation to provide personalized intestinal preparation measures to improve the quality of intestinal preparation.Starting from the quality of colonoscopy bowel preparation,continuous improvement of patients’tolerance to bowel preparation,continuous improvement of bowel preparation plan based on individual factors’needs,and better communication with examined subjects by using existing scientific information technology,may be the hot spot of colonoscopy bowel preparation research in the next few years.
文摘Objective:To strengthen preoperative preparation management and reduce preoperative preparation defects.Methods:We set up a special medical care management team to investigate the preoperative preparation in surgical departments,analyze the causes of the shortcomings in preoperative preparation,and propose countermeasures.The medical staff jointly formulated plans related to preoperative preparation management including clear outline of responsibilities,strengthening of training,integrated medical care,timely feedback,and continuous improvement.Besides,the preoperative preparation of patients before and after the improvement measures were compared using statistical analysis.Results:The rate of inadequate preoperative preparation was 11.14 per thousand before the integrated management model was implemented.After the implementation of the integrated management model,the rate of inadequate preoperative preparation decreased to 2.99 per thousand,and the difference was statistically(P<0.05).Conclusion:The integrated management of preoperative preparation can help reduce the rate of preoperative complications and ensure the safety of surgery.
文摘An adequate bowel preparation in patients with inflammatory bowel disease(IBD)is a prerequisite for successful colonoscopy for screening,diagnosis,and surveillance.Several bowel preparation formulations are available,both high-and low-volume based on polyethylene glycol.Generally,low-volume formulations are also based on several compounds such as magnesium citrate preparations with sodium picosulphate,oral sulphate solution,and oral sodium phosphatebased solutions.Targeted studies on the quality of bowel preparation prior to colonoscopy in the IBD population are still required,with current evidence from existing studies being inconclusive.New frontiers are also moving towards the use of alternatives to anterograde ones,using preparations based on retrograde colonic lavage.
基金the supports provided by the National Natural Science Foundation of China (Grant Nos.52271102,52075198 and 52205359)the China Post-doctoral Science Foundation (Grant No.2021M691112)the Analytical and Testing Center,HUST。
文摘Mg/Al bimetal combines the advantages of both aluminum and magnesium and has broad application prospects in automotive, aerospace,weapons, digital products and so on. The compound casting has the characteristics of low cost, easy to achieve metallurgical combination and suitable for the preparation of complex bimetallic parts. However, bimetallic joint strength is low due to differences of physical properties between Al and Mg, oxide film on metallic surface and interfacial Al-Mg IMCs, which is closely related to the interfacial microstructure and properties. Therefore, how to control the interface of the bimetal to achieve performance enhancement is the focus and difficulty in this field. At present, there are mainly the following strengthening methods. First, the “zincate galvanizing” and “electrolytic polishing+anodic oxidation” technology were exert on the surface of Al alloy to remove and break the oxide film, which improved the wettability between Al and Mg. Second, the undesirable Al-Mg IMCs were reduce or elimination by adding the interlayers(Zn, Ni and Ni-Cu). Thirdly, the evolution process of interfacial microstructure was changed and fine strengthening phases were formed by adding Si element to Al alloy or rare earth element to Mg alloy. Fourthly, mechanical vibration and ultrasonic vibration were applied in the process of the filling and solidification to refine and homogenize the interfacial structure. Finally, some other methods, including secondary rolling, thermal modification, heat treatment and constructing exterior 3D morphology, also can be used to regulate the interfacial microstructure and compositions. The above strengthening methods can be used alone or in combination to achieve bimetallic strengthening. Finally, the future development direction of the Mg/Al bimetal is prospected, which provides some new ideas for the development and application of the Mg/Al bimetal.
文摘Adequate bowel cleansing is critical for a high-quality colonoscopy because it affects diagnostic accuracy and adenoma detection.Nevertheless,almost a quarter of procedures are still carried out with suboptimal preparation,resulting in longer procedure times,higher risk of complications,and higher likelihood of missing lesions.Current guidelines recommend high-volume or low-volume polyethylene glycol(PEG)/non-PEG-based split-dose regimens.In patients who have had insufficient bowel cleansing,the colonoscopy should be repeated the same day or the next day with additional bowel cleansing as a salvage option.A strategy that includes a prolonged low-fiber diet,a split preparation regimen,and a colonoscopy within 5 h of the end of preparation may increase cleansing success rates in the elderly.Furthermore,even though no specific product is specifically recommended in the other cases for difficult-to-prepare patients,clinical evidence suggests that 1-L PEG plus ascorbic acid preparation are associated with higher cleansing success in hospitalized and inflammatory bowel disease patients.Patients with severe renal insufficiency(creatinine clearance<30 mL/min)should be prepared with isotonic high volume PEG solutions.Few data on cirrhotic patients are currently available,and no trials have been conducted in this population.An accurate characterization of procedural and patient variables may lead to a more personalized approach to bowel preparation,especially in patients undergoing resection of left colon lesions,where intestinal preparation has a poor outcome.The purpose of this review was to summarize the evidence on the risk factors influencing the quality of bowel cleansing in difficult-to-prepare patients,as well as strategies to improve colonoscopy preparation in these patients.
文摘Patients with inflammatory bowel diseases(IBDs)require repeated endoscopic evaluations over time by colonoscopy to weigh disease activity but also for different and additional indications(e.g.,evaluation of postoperative recurrence,colorectal cancer surveillance).Colonoscopy,however,requires adequate bowel preparation to be of quality.The latter is achieved as long as the patient takes a certain amount of product to have a number of bowel movements suitable to clean the colon and allow optimal visualization of the mucosa during endoscopy.However,significant guidelines recommend preparations for patients with IBD not excelling in palatability.This recommendation originates from the fact that most of the studies conducted on bowel preparations in patients with IBD have been done with isosmolar preparations based on polyethylene glycol(PEG),for which,therefore,more safety data exist.As a result,the low-volume non-PEG preparations(e.g.,magnesium citrate plus picosulphate,oral sulphate solutions)have been set aside for the whole range of warnings to be heeded because of their hyperosmolarity.New studies,however,are emerging,leaning in overall for a paradigm shift in this matter.Indeed,such non-PEG preparations seem to show a particularly encouraging and engaging safety profile when considering their broad potential for tolerability and patient preference.Indeed,such evidence is insufficient to indicate such preparations in all patients with IBD but may pave the way for those with remission or well-controlled disease.This article summarizes the central studies conducted in IBD settings using non-PEG preparations by discussing their results.
文摘BACKGROUND Adequate bowel preparation is critical for colonoscopy screening.At present,the most widely used intestinal cleaner recommended at home and abroad is Polyethylene glycol(PEG).Intestinal cleansers can cause electrolyte disturbances and hyponatremia.However,hyponatremic encephalopathy due to hyponatremia induced by PEG solution,although rare,can lead to serious irreversible sequelae and even death.CASE SUMMARY In this report,we discuss a case of neurological dysfunction due to hyponatremia,also known as hyponatremic encephalopathy,observed in a 63-year-old woman who underwent PEG-based bowel preparation for colonoscopy.She was eventually transferred to our intensive care unit for treatment due to her Glasgow Coma Scale score of 9/15(Eye opening 2;Verbal response 1;Motor response 6)and abnormal laboratory tests.CONCLUSION Physicians should be thoroughly familiarized with the patient’s history before prescribing PEG for bowel preparation,and timely identification of patients with hyponatremic encephalopathy is essential as delayed treatment is associated with poor neurological outcomes.An intravenous infusion of 3%sodium chloride is recommended at the onset of early symptoms.The goal of treatment is to adequately treat cerebral edema while avoiding serum sodium correction beyond 15 to 20 m Eq/L within 48 h of treatment to prevent osmotic demyelination syndrome.
基金supported by Innovation Capability Support Program of Shaanxi(2022TD-07).
文摘With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance and durability.Polyurethane(PU)has been used in asphalt pavement engineering to enhance the durability and service life of asphalt pavement because of its excellent high-temperature performance,toughness,wear resistance,aging resistance and oil resistance.However,PU modified asphalt technology is still in the exploratory stage.The preparation,modification mechanism and working performances of PU modified asphalt need to be further clarified.Therefore,this paper summarized the research progress of PU modified asphalt and its mixture.The composition of PU modified asphalt was introduced.The addition methods of PU materials and preparation process parameters of the PU modified asphalt were determined.The modification mechanism of PU on asphalt was discussed.The effects of polyurethane on asphalt were analyzed and the road performances of its mixture were evaluated.Finally,the development tendency towards PU modified asphalt and its mixture were forecasted.
基金funded by the National Natural Science Foundation of China (No.52004020)Fundamental Research Funds for the Central Universities (No.00007733)+2 种基金Open Foundation of State Key Laboratory of Mineral Processing (No.BGRIMM-KJSKL-2021-13)High-end Foreign Expert Introduction Program (No.G2022105001L)State Key Laboratory of Comprehensive Utilization of LowGrade Refractory Gold Ores,Zijin Mining Group Co.,Ltd.
文摘In the past few decades,microbubble flotation has been widely studied in the separation and beneficiation of fine minerals.Compared with conventional flotation,microbubble flotation has obvious advantages,such as high grade and recovery and low consumption of flotation reagents.This work systematically reviews the latest advances and research progress in the flotation of fine mineral particles by microbubbles.In general,microbubbles have small bubble size,large specific surface area,high surface energy,and good selectivity and can also easily be attached to the surface of hydrophobic particles or large bubbles,greatly reducing the detaching probability of particles from bubbles.Microbubbles can be prepared by pressurized aeration and dissolved air,electrolysis,ultrasonic cavitation,photocatalysis,solvent exchange,temperature difference method(TDM),and Venturi tube and membrane method.Correspondingly,equipment for fine-particle flotation is categorized as microbubble release flotation machine,centrifugal flotation column,packed flotation column,and magnetic flotation machine.In practice,microbubble flotation has been widely studied in the beneficiation of ultrafine coals,metallic minerals,and nonmetallic minerals and exhibited superiority over conventional flotation machines.Mechanisms underpinning the promotion of fine-particle flotation by nanobubbles include the agglomeration of fine particles,high stability of nanobubbles in aqueous solutions,and enhancement of particle hydrophobicity and flotation dynamics.
基金Funded by the Science and Technology Innovation Plan of Wuhan Textile Universitythe Open Project of the State Key Laboratory of New Textile Materials and Advanced Processing Technologies (No.FZ2020003)the National Natural Science Foundation of China (No.51603155)。
文摘A chiral low-molecular-weight gelator(LMWG) L-16Ala5PyPF6 was synthesized from L-alanine, which can cause physical gel in n-propanol, ethyl acetate, butylene oxide, water, benzene, 1,4-dioxane and chloroform. The sol-gel reactions were carried out in a mixture of stronger ammonia water and n-propanol at the volume ratio of 2:8. Single-handed twisted silica nanostructures with pore channels vertical to the wall surfaces were first prepared through a single-templating approach comparing with the reported double template method. The formation mechanism of radial pore structure was studied by transmission electron microscopy at different reaction time intervals, which indicated that the radial pore structure was formed via a structural transition in the sol-gel transcription process.
基金Funded by the Opening Funding of the Provincial and Ministerial Joint Construction of the State Key Laboratory of New Textile Materials and Advanced Processing Technology (No.FZ2020003)the National Natural Science Foundation of China (No.51603155)。
文摘Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The morphologies and pore sizes of silicas are adjustable by changing the type and amount of solvents in the reaction systems.With the increase of the organic solvent content,the morphologies of the obtained silica changed from nanospheres with vertical pore structures to nanosheets structures.When 1 mL of benzene,cyclohexane or toluene were used as solvents,only silica nanospheres were obtained,the BET surface areas of silica nanospheres reached 600.7,669.5,and 560.8 m^(2)/g,respectively.The pore sizes were 3.51,3.54,and 3.46 nm,respectively.Significantly,these ordered silica nanospheres/poly(vinyl alcohol-co-ethylene)(PVAco-PE)nanofiber membranes have high separation efficiencies(>99%)for n-hexane/water mixtures.
基金Project supported by the Fundamental Research Program of Shanxi Province (Grant No. 202203021211260)。
文摘We investigate the influence of a noisy environment on the remote preparation of the multi-qubit equatorial state, and specifically deduce the final states and fidelities of the remote preparation of the three-qubit and four-qubit equatorial states under diverse types of noisy environments, namely, amplitude damping, bit flip, phase damping, phase flip, bit-phase flip,depolarization, and non-Markov environments. The results show that when the decoherence factors of the front six noises are equal, the influence degrees of phase damped noise, bit flip noise, phase flip noise, and bit-phase flip noise are similar,while the information loss caused by the amplitude damped noise and depolarizing noise is less. In particular, the bit flip noise and depolarizing noise may have more complex effects on the remote state preparation(RSP) schemes depending on the phase information of the target states, even for the ideal cases where the fidelity values are always 1 for specific phase relations. In the non-Markov environment, owing to the back and forth of information between the environment and systems, fidelities exhibit oscillating behavior and the minimum value may stay greater than zero for a long evolutionary time. These results are expected to have potential applications for understanding and avoiding the influence of noise on remote quantum communication and quantum networks.
基金Supported by National Natural Science Foundation of China(Grant Nos.52275227,52130509)Key Basic Research Project of the Foundation Strengthening Plan of China(Grant Nos.2019-JCJQ-JJ-034,2019-JCJQ-ZD-302).
文摘Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons.Due to their excellent optical,electrical and magnetic properties,their advantages and potential for applications in the above areas are gradually emerging.Therefore,an increasing number of researchers have focused on photonic crystals.In this paper,the characteristics of biological photonic crystal structures,such as those found in butterfly wings,sea mouse bristles,peacock feathers,melon jellyfish epidermal cells,and weevil exoskeletons,are described.The preparation methods of photonic crystals are systematically summarized(including the template method,self-assembly technology,electron beam evaporation coating technology,chemical vapor deposition technology,femtosecond laser two-photon technology,spin coating technology,and a variety of technology mixing),and the characteristics,advantages,and disadvantages of the different methods are compared.Furthermore,the development of photonic crystals in the field of sensors,solar cells,filters,and infrared stealth is discussed,demonstrateing the great development potential of photonic crystals.It is concluded that the realization of photonic crystals with high precision,high sensitivity,angle independence,and large-area uniform preparation is a key problem requiring urgent solution.Moreover,photonic crystals have potential development prospects in the fields of equipment stealth,new concept weapons,production,an daily life.
