Ground-based tests are important for studying hypervelocity impact(HVI)damage to spacecraft pressure vessels in the orbital debris environment.We analyzed the damage to composite overwrapped pressure vessels(COPVs)in ...Ground-based tests are important for studying hypervelocity impact(HVI)damage to spacecraft pressure vessels in the orbital debris environment.We analyzed the damage to composite overwrapped pressure vessels(COPVs)in the HVI tests and classified the damage into non-catastrophic damage and catastrophic damage.We proposed a numerical simulation method to further study non-catastrophic damage and revealed the characteristics and mechanisms of non-catastrophic damage affected by impact conditions and internal pressures.The fragments of the catastrophically damaged COPVs were collected after the tests.The crack distribution and propagation process of the catastrophic ruptures of the COPVs were analyzed.Our findings contribute to understanding the damage characteristics and mechanisms of COPVs by HVIs.展开更多
In this paper,five items of standards of steels used for pressure vessels which are issued recently or about to be issued and put into effect have been introduced.The differences of standards mentioned above and the f...In this paper,five items of standards of steels used for pressure vessels which are issued recently or about to be issued and put into effect have been introduced.The differences of standards mentioned above and the former standards and the primary qualifications have been formulated.These qualifications indicate that,some qualifications of national standards of steels used for pressure vessels are on the international advanced level.展开更多
To meet the demand of the domestic pressure vessel industry for roll-bonded clad steel plates,Baosteel has developed an S30403+Q345R roll-bonded clad steel plate. Comprehensive inspections of the composition,microstru...To meet the demand of the domestic pressure vessel industry for roll-bonded clad steel plates,Baosteel has developed an S30403+Q345R roll-bonded clad steel plate. Comprehensive inspections of the composition,microstructure,and properties are made to systematically evaluate the steel plate in the normalized and normalized +stress relieved states. The results show the cladding interface of the S30403+Q345R roll-bonded clad steel plate has high shear strength,the base metal has good properties,and the mechanical properties of the steel plate head and tail are uniform. The performance is fully consistent with the technical requirements of the roll-bonded clad steel plate for pressure vessels.展开更多
This study focuses on vibration analysis of cylindrical pressure vessels constructed by functionally graded carbon nanotube reinforced composites(FG-CNTRC).The vessel is under internal pressure and surrounded by a Pas...This study focuses on vibration analysis of cylindrical pressure vessels constructed by functionally graded carbon nanotube reinforced composites(FG-CNTRC).The vessel is under internal pressure and surrounded by a Pasternak foundation.This investigation was founded based on two-dimensional elastic analysis and used Hamilton’s principle to drive the governing equations.The deformations and effective-mechanical properties of the reinforced structure were elicited from the first-order shear theory(FSDT)and rule of mixture,respectively.The main goal of this study is to show the effects of various design parameters such as boundary conditions,reinforcement distribution,foundation parameters,and aspect ratio on the free vibration characteristics of the structure.展开更多
A theoretical solution is aimed to be developed in this research for predicting the failure in internally pressurized composite pressure vessels exposed to low-velocity impact.Both in-plane and out-of-plane failure mo...A theoretical solution is aimed to be developed in this research for predicting the failure in internally pressurized composite pressure vessels exposed to low-velocity impact.Both in-plane and out-of-plane failure modes are taken into account simultaneously and thus all components of the stress and strain fields are derived.For this purpose,layer-wise theory is employed in a composite cylinder under internal pressure and low-velocity impact.Obtained stress/strain components are fed into appropriate failure criteria for investigating the occurrence of failure.In case of experiencing any in-plane failure mode,the evolution of damage is modeled using progressive damage modeling in the context of continuum damage mechanics.Namely,mechanical properties of failed ply are degraded and stress analysis is performed on the updated status of the model.In the event of delamination occurrence,the solution is terminated.The obtained results are validated with available experimental observations in open literature.It is observed that the sequence of in-plane failure and delamination varies by increasing the impact energy.展开更多
The mechanical and fatigue properties of SA508-Ⅳ steel with martensite and granular bainite, respectively, were studied. The mechanical tests results showed that the ultimate tensile strength and impact toughness of ...The mechanical and fatigue properties of SA508-Ⅳ steel with martensite and granular bainite, respectively, were studied. The mechanical tests results showed that the ultimate tensile strength and impact toughness of the specimen with martensite were 830 MPa and 158 J, respectively, and those of the specimen with granular bainite were 811 MPa and 115 J, respectively. The former had higher tensile strength and impact toughness than the latter. The impact tests results showed that the former belonged to typical dimple fracture, while the latter belonged to brittle fracture. The fatigue tests results showed that the fatigue life of the specimen with martensite was 2717 cycles, and that of the specimen with granular bainite was 1545 cycles under the strain amplitude of ± 0.45%. The specimen with martensite had fewer crack initiation points, narrower fatigue striations separation, and larger volume fraction of high-angle grain boundaries than the latter. The fewer crack initiation points meant fewer fatigue cracks, the narrower fatigue striations separation meant slower crack propagation rate, and the larger volume fraction of high-angle grain boundaries could more effectively hinder fatigue crack propagation. Based on these facts, the fatigue life of the specimen with martensite was higher than that of the specimen with granular bainite.展开更多
Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power pla...Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power plant.As-welded and reheated regions mainly consist of acicular and polygonal ferrite,respectively.Fractographic examination of Charpy V-notch impact toughness specimens reveals large inclusions(0.5-2.5μm)at the brittle fracture primary initiation sites.High impact energies were measured for the specimens in which brittle fracture was initiated from a small inclusion or an inclusion away from the V-notch.The density,geometry,and chemical composition of the primary initiation inclusions were investigated.A brittle fracture crack initiates as a microcrack either within the multiphase oxide inclusions or from the debonded interfaces between the uncracked inclusions and weld metal matrix.Primary fracture sites can be determined in all the specimens tested in the lower part of the transition curve at and below the 41-J reference impact toughness energy but not above the mentioned value because of the changes in the fracture mechanism and resulting changes in the fracture appearance.展开更多
This paper studies optimal shape design of pressure vessel head subject to internal uniform pressure.The optimization aims at minimizing its maximum stress while the volume of the vessel head remains no less than the ...This paper studies optimal shape design of pressure vessel head subject to internal uniform pressure.The optimization aims at minimizing its maximum stress while the volume of the vessel head remains no less than the standard ellipsoidal head.Super-ellipse curve is selected to describe the middle surface shape of the vessel head because it represents a large family of curves with only two or three parameters and makes the design and manufacture easy.The performance of different elements and element sizes of FEM modeling is carefully studied in view of computational cost,accuracy and noises of von Mises stress.The response surface of the maximum stress vs.shape design parameters is approximated by a Kriging surrogate model with EI criterion for sampling adding,based on the parameter optimization which is carried out to search the optimal shape.Finally,it is shown by numerical comparison that the super-ellipsoidal head is better than the standard ellipsoidal head and the other vessel heads in the literature.展开更多
In this paper,the evaluations of metal ablation processes under high temperature,i.e.,the Al plate ablated by a laser and a heat carrier and the reactor pressure vessel ablated by a core melt,are studied by a novel pe...In this paper,the evaluations of metal ablation processes under high temperature,i.e.,the Al plate ablated by a laser and a heat carrier and the reactor pressure vessel ablated by a core melt,are studied by a novel peridynamic method.Above all,the peridynamic formulation for the heat conduction problem is obtained by Taylor’s expansion technique.Then,a simple and efficient moving boundary model in the peridynamic framework is proposed to handle the variable geometries,in which the ablated states of material points are described by an additional scalar field.Next,due to the automatic non-interpenetration properties of peridynamic method,a contact algorithm is established to determine the contact relationship between the ablated system and the additional heat carrier.In addition,the corresponding computational procedure is listed in detail.Finally,several numerical examples are carried out and the results verify the validity and accuracy of the present method.展开更多
In this research,mechanical stress,static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented.The kinematic relations are developed based on higherorder sinusoi...In this research,mechanical stress,static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented.The kinematic relations are developed based on higherorder sinusoidal shear deformation theory.Thickness stretching formulation is accounted for more accurate analysis.The total transverse deflection is divided into bending,shear and thickness stretching parts in which the third term is responsible for change of deflection along the thickness direction.The axisymmetric formulations are derived through principle of virtual work.A parametric study is presented to investigate variation of stress and strain components along the thickness and longitudinal directions.To explore effect of thickness stretching model on the static results,a comparison between the present results with the available results of literature is presented.As an important output,effect of micro-scale parameter is studied on the static stress and strain distribution.展开更多
The effects of annealing and irradiation on the evolution of Cu clusters in a-Fe are investigated using object kinetic Monte Carlo simulations.In our model,vacancies act as carriers for chemical species via thermally ...The effects of annealing and irradiation on the evolution of Cu clusters in a-Fe are investigated using object kinetic Monte Carlo simulations.In our model,vacancies act as carriers for chemical species via thermally activated diffusion jumps,thus playing an important role in solute diffusion.At the end of the Cu cluster evolution,the simulations of the average radius and number density of the clusters are consistent with the experimental data,which indicates that the proposed simulation model is applicable and effective.For the simulation of the annealing process,it is found that the evolution of the cluster size roughly follows the 1/2 time power law with the increase in radius during the growth phase and the 1/3 time power law during the coarsening phase.In addition,the main difference between neutron and ion irradiation is the growth and evolution process of the copper-vacancy clusters.The aggregation of vacancy clusters under ion irradiation suppresses the migration and coarsening of the clusters,which ultimately leads to a smaller average radius of the copper clusters.Our proposed simulation model can supplement experimental analyses and provide a detailed evolution mechanism of vacancy-enhanced precipitation,thereby providing a foundation for other elemental precipitation research.展开更多
The two-pass isothermal hot compression method was used to study the effect of different thermal deformation conditions on static recrystallization behavior in Ni-Cr-Mo series SA508Gr.4N low alloy steel with interval ...The two-pass isothermal hot compression method was used to study the effect of different thermal deformation conditions on static recrystallization behavior in Ni-Cr-Mo series SA508Gr.4N low alloy steel with interval holding time ranging from 1 to 300 s,temperature ranging from 950 to 1150℃,strain rate ranging from 0.01 to 1 s^(-1),true strains ranging from 0.1 to 0.2,and initial austenite grain size ranging from 175 to 552μm.It can be concluded that the static recrystallization volume fraction gradually increases with the increase in the deformation temperature,strain rate,strain and pass interval,and the decrease in the initial grain size,which is mainly due to the increase in the deformation energy storage and dislocations.Moreover,strain-induced grain boundary migration is the nucleation mechanism for static recrystallization of SA508Gr.4N low alloy steel.Based on the stress-strain curve,the predicted value obtained from the established static recrystallization kinetics model is in good consistence with the experimental value,and the static recrystallization thermal activation energy of SA508Gr.4N steel was calculated as 264,225.99 J/mol.展开更多
An investigation was performed to determine the pressure transient levels and time required to reach pressure equilibrium in a regulated liquid propulsion system due to the priming of a propellant tank during system i...An investigation was performed to determine the pressure transient levels and time required to reach pressure equilibrium in a regulated liquid propulsion system due to the priming of a propellant tank during system initiation.An experimental fluid flow test setup was designed and fabricated using a pressure vessel to house distilled water as a propellant simulant for liquid hydrazine and high-pressure gaseous nitrogen as the pressurant.A snubber orifice was installed downstream of the high-pressure gaseous nitrogen bottles to protect a regulator from high-pressure transients,prior to the regulation of incoming gas to beginning of life propulsion system propellant tank conditions.Experiments were conducted to measure pressure transients and time to pressure equilibrium by varying initial system pressures,snubber orifice diameter,and system ullage volume.A mathematical model was developed and compared against the experimental regulated system priming results to predict the system pressures and time to reach system pressure equilibrium during the pressurization period for regulated propulsion systems given initial conditions.展开更多
During a hypothetical severe accident of light water reactors,the reactor pressure vessel(RPV) could fail due to its creep under the influence of high-temperature corium.Hence,modelling of creep behavior of the RPV is...During a hypothetical severe accident of light water reactors,the reactor pressure vessel(RPV) could fail due to its creep under the influence of high-temperature corium.Hence,modelling of creep behavior of the RPV is paramount to reactor safety analysis since it predicts the transition point of accident progression from in-vessel to ex-vessel phase.In the present study we proposed a new creep model for the classical French RPV steel 16 MND5,which is adapted from the "theta-projection model" and contains all three stages of a creep process.Creep curves are expressed as a function of time with five model parameters θ_i(i=1-4 and m).A model parameter dataset was constructed by fitting experimental creep curves into this function.To correlate the creep curves for different temperatures and stress loads,we directly interpolate the model’s parameters θ_i(i=1-4 and m) from this dataset,in contrast to the conventional "theta-projection model" which employs an extra single correlation for each θ_i(i=1-4 andm),to better accommodate all experimental curves over the wide ranges of temperature and stress loads.We also put a constraint on the trend of the creep strain that it would monotonically increase with temperature and stress load.A good agreement was achieved between each experimental creep curve and corresponding model’s prediction.The widely used time-hardening and strain-hardening models were performing reasonably well in the new method.展开更多
The irradiation resistance of pre-deformed FeCu alloy was studied using a 3 MeV Fe ion irradiation experiment at room temperature in comparison with that of the as-received sample.Nanoindentation and atom probe tomogr...The irradiation resistance of pre-deformed FeCu alloy was studied using a 3 MeV Fe ion irradiation experiment at room temperature in comparison with that of the as-received sample.Nanoindentation and atom probe tomography(APT) were used to characterize the mechanical properties and solute distribution.The stress-strain curve obtained by nanoindentation shows that the yield strength(σ0.2) of the pre-deformed sample is unexpectedly reduced with an increase in the irradiation dose to five displacements per atom(dpa).We suggest that it results both from the decrease in the dislocation density and the suppression of defects during irradiation.APT shows that the nucleation of the Cu cluster is suppressed;however,its growth is promoted in the pre-deformed sample,resulting in the formation of sparse and coarse clusters at 1 dpa irradiation.These coarse Cu clusters were then unexpectedly refined to finer grains with an increase in the irradiation dose to 5 dpa.Theoretically,the improvement in the resistance to irradiation in the pre-deformed sample is attributed to the dense point-defect sinks,that is,the dislocations and grain boundaries introduced by pre-deformation.In addition,the contributions of the dislocations and grain boundaries to the sink strength are estimated for both the as-received and pre-deformed samples.The results indicate that dislocations,rather than grain boundaries,play a major role after deformation.展开更多
An experimental steel billet of SA508 reactor pressure vessel material was manufactured by the additive forging method,and microstructure and mechanical properties of the hot-compression bonding interface were systema...An experimental steel billet of SA508 reactor pressure vessel material was manufactured by the additive forging method,and microstructure and mechanical properties of the hot-compression bonding interface were systematically investigated.The result indicated that oxidation levels of bonding interfaces were well controlled using vacuum electron beam welding.It was easy to discriminate interfaces from base materials during the optical microstructure observation,since interfaces were characterized by grain or phase boundaries in a straight line.Test results of uniaxial tensile experiments(at 20 and 350°C)and Charpy V-notched impact tests(at 0 and 20°C)showed that fracture behaviour of all those samples appeared at the base material,and bonding interfaces showed advantage of strength and toughness at the forge bonding state.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.11672097,11772113)。
文摘Ground-based tests are important for studying hypervelocity impact(HVI)damage to spacecraft pressure vessels in the orbital debris environment.We analyzed the damage to composite overwrapped pressure vessels(COPVs)in the HVI tests and classified the damage into non-catastrophic damage and catastrophic damage.We proposed a numerical simulation method to further study non-catastrophic damage and revealed the characteristics and mechanisms of non-catastrophic damage affected by impact conditions and internal pressures.The fragments of the catastrophically damaged COPVs were collected after the tests.The crack distribution and propagation process of the catastrophic ruptures of the COPVs were analyzed.Our findings contribute to understanding the damage characteristics and mechanisms of COPVs by HVIs.
文摘In this paper,five items of standards of steels used for pressure vessels which are issued recently or about to be issued and put into effect have been introduced.The differences of standards mentioned above and the former standards and the primary qualifications have been formulated.These qualifications indicate that,some qualifications of national standards of steels used for pressure vessels are on the international advanced level.
文摘To meet the demand of the domestic pressure vessel industry for roll-bonded clad steel plates,Baosteel has developed an S30403+Q345R roll-bonded clad steel plate. Comprehensive inspections of the composition,microstructure,and properties are made to systematically evaluate the steel plate in the normalized and normalized +stress relieved states. The results show the cladding interface of the S30403+Q345R roll-bonded clad steel plate has high shear strength,the base metal has good properties,and the mechanical properties of the steel plate head and tail are uniform. The performance is fully consistent with the technical requirements of the roll-bonded clad steel plate for pressure vessels.
基金This work was financially supported by the University of Kashan(Grant Number:574613/026).
文摘This study focuses on vibration analysis of cylindrical pressure vessels constructed by functionally graded carbon nanotube reinforced composites(FG-CNTRC).The vessel is under internal pressure and surrounded by a Pasternak foundation.This investigation was founded based on two-dimensional elastic analysis and used Hamilton’s principle to drive the governing equations.The deformations and effective-mechanical properties of the reinforced structure were elicited from the first-order shear theory(FSDT)and rule of mixture,respectively.The main goal of this study is to show the effects of various design parameters such as boundary conditions,reinforcement distribution,foundation parameters,and aspect ratio on the free vibration characteristics of the structure.
文摘A theoretical solution is aimed to be developed in this research for predicting the failure in internally pressurized composite pressure vessels exposed to low-velocity impact.Both in-plane and out-of-plane failure modes are taken into account simultaneously and thus all components of the stress and strain fields are derived.For this purpose,layer-wise theory is employed in a composite cylinder under internal pressure and low-velocity impact.Obtained stress/strain components are fed into appropriate failure criteria for investigating the occurrence of failure.In case of experiencing any in-plane failure mode,the evolution of damage is modeled using progressive damage modeling in the context of continuum damage mechanics.Namely,mechanical properties of failed ply are degraded and stress analysis is performed on the updated status of the model.In the event of delamination occurrence,the solution is terminated.The obtained results are validated with available experimental observations in open literature.It is observed that the sequence of in-plane failure and delamination varies by increasing the impact energy.
基金the Beijing Municipal Natural Science Foundation under No.2162026 and the 863 Program of China under Nos.2008AA031702 and 2012AA03A507 for financial support.
文摘The mechanical and fatigue properties of SA508-Ⅳ steel with martensite and granular bainite, respectively, were studied. The mechanical tests results showed that the ultimate tensile strength and impact toughness of the specimen with martensite were 830 MPa and 158 J, respectively, and those of the specimen with granular bainite were 811 MPa and 115 J, respectively. The former had higher tensile strength and impact toughness than the latter. The impact tests results showed that the former belonged to typical dimple fracture, while the latter belonged to brittle fracture. The fatigue tests results showed that the fatigue life of the specimen with martensite was 2717 cycles, and that of the specimen with granular bainite was 1545 cycles under the strain amplitude of ± 0.45%. The specimen with martensite had fewer crack initiation points, narrower fatigue striations separation, and larger volume fraction of high-angle grain boundaries than the latter. The fewer crack initiation points meant fewer fatigue cracks, the narrower fatigue striations separation meant slower crack propagation rate, and the larger volume fraction of high-angle grain boundaries could more effectively hinder fatigue crack propagation. Based on these facts, the fatigue life of the specimen with martensite was higher than that of the specimen with granular bainite.
基金the SAFIR2022 BRUTE project (Barseback RPV material used for true evaluation of embrittlement) for funding the study
文摘Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power plant.As-welded and reheated regions mainly consist of acicular and polygonal ferrite,respectively.Fractographic examination of Charpy V-notch impact toughness specimens reveals large inclusions(0.5-2.5μm)at the brittle fracture primary initiation sites.High impact energies were measured for the specimens in which brittle fracture was initiated from a small inclusion or an inclusion away from the V-notch.The density,geometry,and chemical composition of the primary initiation inclusions were investigated.A brittle fracture crack initiates as a microcrack either within the multiphase oxide inclusions or from the debonded interfaces between the uncracked inclusions and weld metal matrix.Primary fracture sites can be determined in all the specimens tested in the lower part of the transition curve at and below the 41-J reference impact toughness energy but not above the mentioned value because of the changes in the fracture mechanism and resulting changes in the fracture appearance.
基金Sponsored by the National Natural Science Foundation of China(Grant No.9121620111128205)+1 种基金the National Program on Key Basic Research Project(Grant No.2011CB610304)the Fundamental Research Funds for the Central Universities(Grant No.DUT 11 ZD(G)04)
文摘This paper studies optimal shape design of pressure vessel head subject to internal uniform pressure.The optimization aims at minimizing its maximum stress while the volume of the vessel head remains no less than the standard ellipsoidal head.Super-ellipse curve is selected to describe the middle surface shape of the vessel head because it represents a large family of curves with only two or three parameters and makes the design and manufacture easy.The performance of different elements and element sizes of FEM modeling is carefully studied in view of computational cost,accuracy and noises of von Mises stress.The response surface of the maximum stress vs.shape design parameters is approximated by a Kriging surrogate model with EI criterion for sampling adding,based on the parameter optimization which is carried out to search the optimal shape.Finally,it is shown by numerical comparison that the super-ellipsoidal head is better than the standard ellipsoidal head and the other vessel heads in the literature.
基金supported by the National Natural Science Foundation of China(No.12102416).
文摘In this paper,the evaluations of metal ablation processes under high temperature,i.e.,the Al plate ablated by a laser and a heat carrier and the reactor pressure vessel ablated by a core melt,are studied by a novel peridynamic method.Above all,the peridynamic formulation for the heat conduction problem is obtained by Taylor’s expansion technique.Then,a simple and efficient moving boundary model in the peridynamic framework is proposed to handle the variable geometries,in which the ablated states of material points are described by an additional scalar field.Next,due to the automatic non-interpenetration properties of peridynamic method,a contact algorithm is established to determine the contact relationship between the ablated system and the additional heat carrier.In addition,the corresponding computational procedure is listed in detail.Finally,several numerical examples are carried out and the results verify the validity and accuracy of the present method.
文摘In this research,mechanical stress,static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented.The kinematic relations are developed based on higherorder sinusoidal shear deformation theory.Thickness stretching formulation is accounted for more accurate analysis.The total transverse deflection is divided into bending,shear and thickness stretching parts in which the third term is responsible for change of deflection along the thickness direction.The axisymmetric formulations are derived through principle of virtual work.A parametric study is presented to investigate variation of stress and strain components along the thickness and longitudinal directions.To explore effect of thickness stretching model on the static results,a comparison between the present results with the available results of literature is presented.As an important output,effect of micro-scale parameter is studied on the static stress and strain distribution.
基金supported by the National Natural Science Foundation of China (Nos.11975135 and 12005017)China Postdoctoral Science Foundation (No.2021M701829)
文摘The effects of annealing and irradiation on the evolution of Cu clusters in a-Fe are investigated using object kinetic Monte Carlo simulations.In our model,vacancies act as carriers for chemical species via thermally activated diffusion jumps,thus playing an important role in solute diffusion.At the end of the Cu cluster evolution,the simulations of the average radius and number density of the clusters are consistent with the experimental data,which indicates that the proposed simulation model is applicable and effective.For the simulation of the annealing process,it is found that the evolution of the cluster size roughly follows the 1/2 time power law with the increase in radius during the growth phase and the 1/3 time power law during the coarsening phase.In addition,the main difference between neutron and ion irradiation is the growth and evolution process of the copper-vacancy clusters.The aggregation of vacancy clusters under ion irradiation suppresses the migration and coarsening of the clusters,which ultimately leads to a smaller average radius of the copper clusters.Our proposed simulation model can supplement experimental analyses and provide a detailed evolution mechanism of vacancy-enhanced precipitation,thereby providing a foundation for other elemental precipitation research.
基金This work was financially supported by the National Energy Application Technology Research and Engineering Demonstrative Project of China(NY201501)the National High Technology Research and Development Program of China(863 program.No.2012AA03A501)the National Key Research and Development Program of China(2016YFB0300203).
文摘The two-pass isothermal hot compression method was used to study the effect of different thermal deformation conditions on static recrystallization behavior in Ni-Cr-Mo series SA508Gr.4N low alloy steel with interval holding time ranging from 1 to 300 s,temperature ranging from 950 to 1150℃,strain rate ranging from 0.01 to 1 s^(-1),true strains ranging from 0.1 to 0.2,and initial austenite grain size ranging from 175 to 552μm.It can be concluded that the static recrystallization volume fraction gradually increases with the increase in the deformation temperature,strain rate,strain and pass interval,and the decrease in the initial grain size,which is mainly due to the increase in the deformation energy storage and dislocations.Moreover,strain-induced grain boundary migration is the nucleation mechanism for static recrystallization of SA508Gr.4N low alloy steel.Based on the stress-strain curve,the predicted value obtained from the established static recrystallization kinetics model is in good consistence with the experimental value,and the static recrystallization thermal activation energy of SA508Gr.4N steel was calculated as 264,225.99 J/mol.
文摘An investigation was performed to determine the pressure transient levels and time required to reach pressure equilibrium in a regulated liquid propulsion system due to the priming of a propellant tank during system initiation.An experimental fluid flow test setup was designed and fabricated using a pressure vessel to house distilled water as a propellant simulant for liquid hydrazine and high-pressure gaseous nitrogen as the pressurant.A snubber orifice was installed downstream of the high-pressure gaseous nitrogen bottles to protect a regulator from high-pressure transients,prior to the regulation of incoming gas to beginning of life propulsion system propellant tank conditions.Experiments were conducted to measure pressure transients and time to pressure equilibrium by varying initial system pressures,snubber orifice diameter,and system ullage volume.A mathematical model was developed and compared against the experimental regulated system priming results to predict the system pressures and time to reach system pressure equilibrium during the pressurization period for regulated propulsion systems given initial conditions.
基金support from the research programs of APRI,ENSI and NKSsupport of the scholarship awarded by the China Scholarship Council(CSC)。
文摘During a hypothetical severe accident of light water reactors,the reactor pressure vessel(RPV) could fail due to its creep under the influence of high-temperature corium.Hence,modelling of creep behavior of the RPV is paramount to reactor safety analysis since it predicts the transition point of accident progression from in-vessel to ex-vessel phase.In the present study we proposed a new creep model for the classical French RPV steel 16 MND5,which is adapted from the "theta-projection model" and contains all three stages of a creep process.Creep curves are expressed as a function of time with five model parameters θ_i(i=1-4 and m).A model parameter dataset was constructed by fitting experimental creep curves into this function.To correlate the creep curves for different temperatures and stress loads,we directly interpolate the model’s parameters θ_i(i=1-4 and m) from this dataset,in contrast to the conventional "theta-projection model" which employs an extra single correlation for each θ_i(i=1-4 andm),to better accommodate all experimental curves over the wide ranges of temperature and stress loads.We also put a constraint on the trend of the creep strain that it would monotonically increase with temperature and stress load.A good agreement was achieved between each experimental creep curve and corresponding model’s prediction.The widely used time-hardening and strain-hardening models were performing reasonably well in the new method.
基金financially supported by the National Key Research and Development Program(Nos.2016YFB0700401 and 2017YFB0305304)the Basic Research and Development Program(No.JCYJ20170307153239266)。
文摘The irradiation resistance of pre-deformed FeCu alloy was studied using a 3 MeV Fe ion irradiation experiment at room temperature in comparison with that of the as-received sample.Nanoindentation and atom probe tomography(APT) were used to characterize the mechanical properties and solute distribution.The stress-strain curve obtained by nanoindentation shows that the yield strength(σ0.2) of the pre-deformed sample is unexpectedly reduced with an increase in the irradiation dose to five displacements per atom(dpa).We suggest that it results both from the decrease in the dislocation density and the suppression of defects during irradiation.APT shows that the nucleation of the Cu cluster is suppressed;however,its growth is promoted in the pre-deformed sample,resulting in the formation of sparse and coarse clusters at 1 dpa irradiation.These coarse Cu clusters were then unexpectedly refined to finer grains with an increase in the irradiation dose to 5 dpa.Theoretically,the improvement in the resistance to irradiation in the pre-deformed sample is attributed to the dense point-defect sinks,that is,the dislocations and grain boundaries introduced by pre-deformation.In addition,the contributions of the dislocations and grain boundaries to the sink strength are estimated for both the as-received and pre-deformed samples.The results indicate that dislocations,rather than grain boundaries,play a major role after deformation.
基金This highlight was supported by the National Key Research and Development Program of China(Grant No.2018YFA0702905)the Major Science and Technology Program of Heilongjiang(Grant No.2019ZX10A02),and Heilongjiang"Head Goose"Team.
文摘An experimental steel billet of SA508 reactor pressure vessel material was manufactured by the additive forging method,and microstructure and mechanical properties of the hot-compression bonding interface were systematically investigated.The result indicated that oxidation levels of bonding interfaces were well controlled using vacuum electron beam welding.It was easy to discriminate interfaces from base materials during the optical microstructure observation,since interfaces were characterized by grain or phase boundaries in a straight line.Test results of uniaxial tensile experiments(at 20 and 350°C)and Charpy V-notched impact tests(at 0 and 20°C)showed that fracture behaviour of all those samples appeared at the base material,and bonding interfaces showed advantage of strength and toughness at the forge bonding state.
