It is well known that femtosecond laser pulses can easily spontaneously induce deep-subwavelength periodic surface structures on transparent dielectrics but not on non-transparent semiconductors.Nevertheless,in this s...It is well known that femtosecond laser pulses can easily spontaneously induce deep-subwavelength periodic surface structures on transparent dielectrics but not on non-transparent semiconductors.Nevertheless,in this study,we demonstrate that using high-numerical-aperture 800 nm femtosecond laser direct writing with controlled pulse energy and scanning speed in the near-damage-threshold regime,polarization-dependent deep-subwavelength single grooves with linewidths of~180 nm can be controllably prepared on Si.Generally,the single-groove linewidth increases slightly with increase in the pulse energy and decrease in the scanning speed,whereas the single-groove depth significantly increases from~300 nm to~600 nm with decrease in the scanning speed,or even to over 1μm with multi-processing,indicating the characteristics of transverse clamping and longitudinal growth of such deep-subwavelength single grooves.Energy dispersive spectroscopy composition analysis of the near-groove region confirms that single-groove formation tends to be an ultrafast,non-thermal ablation process,and the oxidized deposits near the grooves are easy to clean up.Furthermore,the results,showing both the strong dependence of groove orientation on laser polarization and the occurrence of double-groove structures due to the interference of pre-formed orthogonal grooves,indicate that the extraordinary field enhancement of strong polarization sensitivity in the deep-subwavelength groove plays an important role in single-groove growth with high stability and collimation.展开更多
The dynamics model of a 2-degree-of-freedom deep groove ball bearing is established by incorporating the raceway surface waviness model comprising multiple sinusoidal functions superposition.The model is solved using ...The dynamics model of a 2-degree-of-freedom deep groove ball bearing is established by incorporating the raceway surface waviness model comprising multiple sinusoidal functions superposition.The model is solved using the fourth-order Runge-Kutta method to obtain the vibration characteristics including displacement,velocity,acceleration,and frequency of the bearing.Validation of the model is accomplished through comparison with theoretical vibration frequencies.The influence of the amplitude of waviness of the inner and outer ring raceway surfaces of deep groove ball bearings on the vibration displacement,peak-to-peak vibration displacement and root-mean-square vibration acceleration is analyzed,and the results show that as the amplitude of the inner and outer ring raceway surfaces waviness increases,all the vibration characteristic indexes increase,indicating that the vibration amplitude of the bearings as well as the energy of the waviness-induced shock waveforms increase with the increase of the amplitude of the waviness.展开更多
Objective: To explore the application value of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation. Methods: Seventy-five patients admitted to our Department of Trauma Su...Objective: To explore the application value of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation. Methods: Seventy-five patients admitted to our Department of Trauma Surgery from June 2022 to April 2024 who underwent rib fracture osteotomy and internal fixation were selected. According to the types of drainage tubes left in the patients after the operation, they were divided into the observation group (35 cases who were left with disposable grooved negative pressure drainage tubes) and the control group (40 cases who were left with closed silicone thoracic drainage tubes). Comparison of chest drainage, pain, postoperative complications, secondary chest penetration rate, drain placement time, hospitalization time, and treatment costs were compared between the two groups. Results: The total postoperative chest drainage volume of the observation group was less than that of the control group (P < 0.05);the degree of pain, the incidence of postoperative complications, and the rate of secondary chest puncture in the observation group were lower than that of the control group three days after the operation (P < 0.05);and the time of drain placement in the observation group was shorter than that of the control group (P < 0.05). Conclusion: The application of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation can significantly improve patients’ postoperative pain and discomfort, reduce complications, lower the rate of secondary chest penetration, promote patients’ postoperative recovery, decrease the amount of postoperative chest drainage, and shorten the time of drain placement, which is worthy of clinical promotion and application.展开更多
BACKGROUND Groove pancreatitis(GP)is a rare condition affecting the pancreatic groove region within the dorsal-cranial part of the pancreatic head,duodenum,and common bile duct.As a rare form of chronic pancreatitis,G...BACKGROUND Groove pancreatitis(GP)is a rare condition affecting the pancreatic groove region within the dorsal-cranial part of the pancreatic head,duodenum,and common bile duct.As a rare form of chronic pancreatitis,GP poses a diagnostic and therapeutic challenge for clinicians.GP is frequently misdiagnosed or not considered;thus,the diagnosis is often delayed by weeks or months.The treatment of GP is complicated and often requires surgical intervention,especially pancreatoduodenectomy.CASE SUMMARY A 66-year-old man with a history of long-term drinking was admitted to the gastroenterology department of our hospital,complaining of vomiting and acid reflux.Upper gastrointestinal endoscopy showed luminal stenosis in the descending part of the duodenum.Abdominal computed tomography showed slight exudation in the descending and horizontal parts of the duodenum with broadening of the groove region,indicating local pancreatitis.The symptoms of intestinal obstruction were not relieved with conservative therapy,and insertion of an enteral feeding tube was not successful.Exploratory laparoscopy was performed and revealed a hard mass with scarring in the horizontal part of the duodenum and stenosis.Intraoperative frozen section analysis showed no evidence of malignancy,and side-to-side duodenojejunostomy was performed.Routine pathologic examination showed massive proliferation of fibrous tissue,hyaline change,and the proliferation of spindle cells.Based on the radiologic and pathologic characteristics,a diagnosis of GP was made.The patient presented with anastomotic obstruction postoperatively and took a long time to recover,requiring supportive therapy.CONCLUSION GP often involves the descending and horizontal parts of the duodenum and causes duodenal stenosis,impaired duodenal motility,and gastric emptying due to fibrosis.展开更多
A rotary swaging machine was applied to fabricating pipe reduction for miniature inner grooved copper tube （MIGCT） heat pipes. Compared with conventional swaging method, the axial feed of the designed rotary swaging...A rotary swaging machine was applied to fabricating pipe reduction for miniature inner grooved copper tube （MIGCT） heat pipes. Compared with conventional swaging method, the axial feed of the designed rotary swaging machine was reached by a constant pushing force. The deformation of grooves in pipe reduced section during rotary swaging was analyzed. The shrinkage and extensibility of pipe reduction were measured and calculated. Furthermore, four aspects, including outer diameter, surface roughness, extensibility and processing time of pipe reduction, which were influenced by the pushing force, were considered. The results show that the tube wall thickness increases gradually along the z-axis at sinking section. However, the outer diameters, surface roughness and micro-cracks at reduced section tend to decrease along the z-axis. Besides, the effect of variation in the pushing force on the extensibility is limited while an increase in the pushing force results in a decrease of surface roughness. Therefore, a large pushing force within the limit is beneficial to pipe reduction manufacturing during rotary swaging process.展开更多
Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multipl...Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.展开更多
To analyze the influence of surface texture on friction properties of Crl2MoV＇, ordinary grinder and spinning technology were adopted to obtain the grooved surface morphology of samples, and then the impact of spindl...To analyze the influence of surface texture on friction properties of Crl2MoV＇, ordinary grinder and spinning technology were adopted to obtain the grooved surface morphology of samples, and then the impact of spindle speed and feed in z-direction on surface morphology in the process of spinning was studied. In addition, the corresponding friction coefficient of sample was obtained through friction and wear tests. The results show that the peak clipping and the valley filling were conducted on the grinding surface, which could improve the surface roughness effectively and make the grinding trench-type wear scar more uniform. Both the area ratio of groove and groove spacing increased initially and then decreased with the increase of the spindle speed or the feed in z-direction. As a kind of micro-process, the groove could influence the friction coefficient of sample surface, whose distribution was beneficial to the reduction of friction coefficient. Compared with the surface obtained through ordinary grinding, grooved surface morphology through spinning technology was more conductive to reduce the friction coefficient, which could be reduced by 25%. When the friction coefficient of sample was reduced to the minimum, the texture of groove corresponded had an optimal area ratio and an optimal groove spacing, 37.5% and 27.5 μm, respectively.展开更多
A 0. 1μm SOI grooved gate pMOSFET with 5.6nm gate oxide is fabricated and demonstrated. The groove depth is 180nm. The transfer characteristics and the output characteristics are shown. At Vds = -1. 5V,the drain satu...A 0. 1μm SOI grooved gate pMOSFET with 5.6nm gate oxide is fabricated and demonstrated. The groove depth is 180nm. The transfer characteristics and the output characteristics are shown. At Vds = -1. 5V,the drain saturation current is 380μA and the off-state leakage current is 1.9nA;the sub-threshold slope is 115mV/dec at Vds = -0. 1V and DIBL factor is 70. 7mV/V. The electrical characteristic comparison between the 0.1μm SOI groovedgate pMOSFET and the 0. 1μm bulk grooved gate one with the same process demonstrates that a 0. 1μm SOI grooved gate pMOSFET has better characteristics in current-driving capability and sub-threshold slope.展开更多
The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements...The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.展开更多
In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were con...In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were concerned. The modeling was per- formed using Fluent software with the adoption of Shear-Stress Transport （SST） k-ωmodel as the turbulence closure. The coolant was supplied by a single film cooling hole with an inclination angle of 30°. The Mach numbers for the coolant flow and the mainstream flow were fixed at 0 and 0.6, respectively. At three blowing ratios of 0.5, 1.0 and 1.5, the aerodynamic behaviour of the mixing process as well as the heat transfer performance of the film cooling were presented. The numerical results were validated using experimental data extracted from a benchmark test. Good agreements between numerical results and the ex- perimental data were observed. For the film cooling efficiency, it shows that both local and laterally averaged cooling effectiveness can be improved by the non-smooth surface at different blowing ratios. Using the grooved surface, the turbulence intensity upon the plate can be reduced notably, and the mixing between the two flows is weakened due to the reduced turbu lence level. The results indicate that the cooling effectiveness of film cooling can be enhanced by applying the grooved surface.展开更多
Spiral groove dry gas seal(S?DGS), the most widely used DGS in the world, encounters the problem of high leakage rate and inferior film stability when used in high?speed machinery equipment, which could not be well so...Spiral groove dry gas seal(S?DGS), the most widely used DGS in the world, encounters the problem of high leakage rate and inferior film stability when used in high?speed machinery equipment, which could not be well solved by optimization of geometrical parameters and molded line of spiral groove. A new type of bionic cluster spiral groove DGS(CS?DGS) is proved to have superior film stability than S?DGS at the condition of high?speed and low?pressure numerically. A bionic CS?DGS is experimentally investigated and compared with common S?DGS in order to provide evidence for theoretical study. The film thickness and leakage rate of both bionic spiral groove and common spiral groove DGS are measured and compared with each other and with theoretical values under different closing force at the condition of static pressure, high?speed and low?pressure, and the film stiffness and stiffness?leakage ratio of these two face seals are derived by the relationship between closing force and film thickness at the steady state. Experimental results agree well with the theory that the leakage and stiffness of bionic CS?DGS are superior to that of common S?DGS under the condition of high?speed and low?pressure, with the decreasing amplitude of 20% to 40% and the growth amplitude of 20%, respectively. The opening performance and stiffness characteristics of bionic CS?DGS are inferior to that of common S?DGS when rotation speed equals to 0 r/min. The proposed research provides a new method to measure the axis film stiffness of DGS, and validates the superior performance of bionic CS?DGS at the condition of high?speed and low?pressure experimentally.展开更多
Dynamic failure and ejection characteristics of a periodic grooved Sn surface under unsupported shock loading are studied using a smoothed particle hydrodynamics method. An ＂Eiffel Tower＂ spatial structure is observ...Dynamic failure and ejection characteristics of a periodic grooved Sn surface under unsupported shock loading are studied using a smoothed particle hydrodynamics method. An ＂Eiffel Tower＂ spatial structure is observed, which is com- posed of high-speed jet tip, high-density jet slug, longitudinal tensile sparse zone, and complex broken zone between grooves. It is very different from the spike-bubble structure under supported shocks, and has been validated by detonation loading experiments. In comparison with that under supported shocks at the same peak pressure, the high-speed ejecta decreases obviously, whereas the truncated location of ejecta moves towards the interior of the sample and the total mass of ejecta increases due to the vast existence of low-speed broken materials. The shock wave profile determines mainly the total ejection amount, while the variation of V-groove angle will significantly alter the distribution of middle- and high-speed ejecta, and the maximum ejecta velocity has a linear corretation with the groove angle.展开更多
The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face se...The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior（steady-state performance and transient performance） of face seals. A numerical finite element method（FEM） model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.展开更多
BACKGROUND Groove pancreatitis(GP)is a type of chronic pancreatitis occurring in an anatomic area between the duodenum,head of the pancreas,and common bile duct.Duodenal obstruction is always caused by malignant pancr...BACKGROUND Groove pancreatitis(GP)is a type of chronic pancreatitis occurring in an anatomic area between the duodenum,head of the pancreas,and common bile duct.Duodenal obstruction is always caused by malignant pancreatic diseases,such as pancreatic head carcinoma,while is rarely induced by benign pancreatic diseases,such as pancreatitis.CASE SUMMARY A 39-year-old man presented with a 1-mo history of upper abdominal discomfort.His concomitant symptoms were abdominal distension,postprandial nausea,and vomiting.Contrast-enhanced computed tomography of the abdomen showed thickening of the intestinal wall with enhancement of the descending segment of the duodenum,which could not be clearly differentiated from the head of the pancreas.Upper gastrointestinal radiographs and gastrointestinal endoscopy showed a complete obstruction of the descending duodenum.An operation found that a 3-cm mass was located in the“groove part”of the pancreas and oppressing the descending duodenum.Pancreaticoduodenectomy was performed to relieve the obstruction and thoroughly remove the pancreatic lesions.The pathologic diagnosis was pancreatitis.The patient had an uneventful recovery with no complications.CONCLUSION Because of the special location and the contracture induced by long-term chronic inflammation,our case reminds surgeons that some benign pancreatic diseases,such as GP,can also present with symptoms similar to those of pancreatic cancer.This knowledge can help to avoid an unnecessary radical operation.展开更多
The relationship between pressure distribution and cavitation （noise） inside throttling groove is investigated by numerical simulation and experimental method. A valve pocket with several transducers is performed to...The relationship between pressure distribution and cavitation （noise） inside throttling groove is investigated by numerical simulation and experimental method. A valve pocket with several transducers is performed to detect the pressure distributions inside the valve chamber, and the results fit quite well with the computational fluid dynamics（CFD） analysis. High-speed imaging techniques are employed to investigate the cavitation mechanisms, in particular bubble inception and cluster formation near the throttling groove. A spectrum analyzer is used to measure the sound pressure level of noise generated by the bubble flow. It is found that the pressure distributions inside the groove are sensitive to the valve port configuration and back pressure. The pressure distribution determines the bubble size and number passing through the valve grooves and the sound pressure level of noise induced by collapsing bubbles. The inlet pressure mainly affects the saturation degree of bubbly flow inside the groove and the intensity of sound nressure level accordingly.展开更多
基金Project supported by the Natural Science Foundation of Guangdong Province (Grant No.2021A1515012335)the National Natural Science Foundation of China (Grant No.11274400)+2 种基金Pearl River S&T Nova Program of Guangzhou (Grant No.201506010059)State Key Laboratory of High Field Laser Physics (Shanghai Institute of Optics and Fine Mechanics)State Key Laboratory of Optoelectronic Materials and Technologies (Sun Yat-Sen University)。
文摘It is well known that femtosecond laser pulses can easily spontaneously induce deep-subwavelength periodic surface structures on transparent dielectrics but not on non-transparent semiconductors.Nevertheless,in this study,we demonstrate that using high-numerical-aperture 800 nm femtosecond laser direct writing with controlled pulse energy and scanning speed in the near-damage-threshold regime,polarization-dependent deep-subwavelength single grooves with linewidths of~180 nm can be controllably prepared on Si.Generally,the single-groove linewidth increases slightly with increase in the pulse energy and decrease in the scanning speed,whereas the single-groove depth significantly increases from~300 nm to~600 nm with decrease in the scanning speed,or even to over 1μm with multi-processing,indicating the characteristics of transverse clamping and longitudinal growth of such deep-subwavelength single grooves.Energy dispersive spectroscopy composition analysis of the near-groove region confirms that single-groove formation tends to be an ultrafast,non-thermal ablation process,and the oxidized deposits near the grooves are easy to clean up.Furthermore,the results,showing both the strong dependence of groove orientation on laser polarization and the occurrence of double-groove structures due to the interference of pre-formed orthogonal grooves,indicate that the extraordinary field enhancement of strong polarization sensitivity in the deep-subwavelength groove plays an important role in single-groove growth with high stability and collimation.
文摘The dynamics model of a 2-degree-of-freedom deep groove ball bearing is established by incorporating the raceway surface waviness model comprising multiple sinusoidal functions superposition.The model is solved using the fourth-order Runge-Kutta method to obtain the vibration characteristics including displacement,velocity,acceleration,and frequency of the bearing.Validation of the model is accomplished through comparison with theoretical vibration frequencies.The influence of the amplitude of waviness of the inner and outer ring raceway surfaces of deep groove ball bearings on the vibration displacement,peak-to-peak vibration displacement and root-mean-square vibration acceleration is analyzed,and the results show that as the amplitude of the inner and outer ring raceway surfaces waviness increases,all the vibration characteristic indexes increase,indicating that the vibration amplitude of the bearings as well as the energy of the waviness-induced shock waveforms increase with the increase of the amplitude of the waviness.
文摘Objective: To explore the application value of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation. Methods: Seventy-five patients admitted to our Department of Trauma Surgery from June 2022 to April 2024 who underwent rib fracture osteotomy and internal fixation were selected. According to the types of drainage tubes left in the patients after the operation, they were divided into the observation group (35 cases who were left with disposable grooved negative pressure drainage tubes) and the control group (40 cases who were left with closed silicone thoracic drainage tubes). Comparison of chest drainage, pain, postoperative complications, secondary chest penetration rate, drain placement time, hospitalization time, and treatment costs were compared between the two groups. Results: The total postoperative chest drainage volume of the observation group was less than that of the control group (P < 0.05);the degree of pain, the incidence of postoperative complications, and the rate of secondary chest puncture in the observation group were lower than that of the control group three days after the operation (P < 0.05);and the time of drain placement in the observation group was shorter than that of the control group (P < 0.05). Conclusion: The application of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation can significantly improve patients’ postoperative pain and discomfort, reduce complications, lower the rate of secondary chest penetration, promote patients’ postoperative recovery, decrease the amount of postoperative chest drainage, and shorten the time of drain placement, which is worthy of clinical promotion and application.
基金Supported by National Natural Science Foundation of China,No.82100568.
文摘BACKGROUND Groove pancreatitis(GP)is a rare condition affecting the pancreatic groove region within the dorsal-cranial part of the pancreatic head,duodenum,and common bile duct.As a rare form of chronic pancreatitis,GP poses a diagnostic and therapeutic challenge for clinicians.GP is frequently misdiagnosed or not considered;thus,the diagnosis is often delayed by weeks or months.The treatment of GP is complicated and often requires surgical intervention,especially pancreatoduodenectomy.CASE SUMMARY A 66-year-old man with a history of long-term drinking was admitted to the gastroenterology department of our hospital,complaining of vomiting and acid reflux.Upper gastrointestinal endoscopy showed luminal stenosis in the descending part of the duodenum.Abdominal computed tomography showed slight exudation in the descending and horizontal parts of the duodenum with broadening of the groove region,indicating local pancreatitis.The symptoms of intestinal obstruction were not relieved with conservative therapy,and insertion of an enteral feeding tube was not successful.Exploratory laparoscopy was performed and revealed a hard mass with scarring in the horizontal part of the duodenum and stenosis.Intraoperative frozen section analysis showed no evidence of malignancy,and side-to-side duodenojejunostomy was performed.Routine pathologic examination showed massive proliferation of fibrous tissue,hyaline change,and the proliferation of spindle cells.Based on the radiologic and pathologic characteristics,a diagnosis of GP was made.The patient presented with anastomotic obstruction postoperatively and took a long time to recover,requiring supportive therapy.CONCLUSION GP often involves the descending and horizontal parts of the duodenum and causes duodenal stenosis,impaired duodenal motility,and gastric emptying due to fibrosis.
基金Project (U0834002) supported by the Key Program of NSFC Guangdong Joint Funds of ChinaProjects (51005079, 20976055) supported by the National Natural Science Foundation of China+1 种基金Project (10451064101005146) supported by the Natural Science Foundation of Guangdong Province, ChinaProject (20100172120001) supported by Specialized Research Fund for the Doctoral Program of Higher Education, China
文摘A rotary swaging machine was applied to fabricating pipe reduction for miniature inner grooved copper tube （MIGCT） heat pipes. Compared with conventional swaging method, the axial feed of the designed rotary swaging machine was reached by a constant pushing force. The deformation of grooves in pipe reduced section during rotary swaging was analyzed. The shrinkage and extensibility of pipe reduction were measured and calculated. Furthermore, four aspects, including outer diameter, surface roughness, extensibility and processing time of pipe reduction, which were influenced by the pushing force, were considered. The results show that the tube wall thickness increases gradually along the z-axis at sinking section. However, the outer diameters, surface roughness and micro-cracks at reduced section tend to decrease along the z-axis. Besides, the effect of variation in the pushing force on the extensibility is limited while an increase in the pushing force results in a decrease of surface roughness. Therefore, a large pushing force within the limit is beneficial to pipe reduction manufacturing during rotary swaging process.
文摘Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.
基金Project(51275543)supported by the National Natural Science Foundation,ChinaProject(KJ1603804)supported by the Research Projects of Chongqing Commission of Science and Technology,China
文摘To analyze the influence of surface texture on friction properties of Crl2MoV＇, ordinary grinder and spinning technology were adopted to obtain the grooved surface morphology of samples, and then the impact of spindle speed and feed in z-direction on surface morphology in the process of spinning was studied. In addition, the corresponding friction coefficient of sample was obtained through friction and wear tests. The results show that the peak clipping and the valley filling were conducted on the grinding surface, which could improve the surface roughness effectively and make the grinding trench-type wear scar more uniform. Both the area ratio of groove and groove spacing increased initially and then decreased with the increase of the spindle speed or the feed in z-direction. As a kind of micro-process, the groove could influence the friction coefficient of sample surface, whose distribution was beneficial to the reduction of friction coefficient. Compared with the surface obtained through ordinary grinding, grooved surface morphology through spinning technology was more conductive to reduce the friction coefficient, which could be reduced by 25%. When the friction coefficient of sample was reduced to the minimum, the texture of groove corresponded had an optimal area ratio and an optimal groove spacing, 37.5% and 27.5 μm, respectively.
文摘A 0. 1μm SOI grooved gate pMOSFET with 5.6nm gate oxide is fabricated and demonstrated. The groove depth is 180nm. The transfer characteristics and the output characteristics are shown. At Vds = -1. 5V,the drain saturation current is 380μA and the off-state leakage current is 1.9nA;the sub-threshold slope is 115mV/dec at Vds = -0. 1V and DIBL factor is 70. 7mV/V. The electrical characteristic comparison between the 0.1μm SOI groovedgate pMOSFET and the 0. 1μm bulk grooved gate one with the same process demonstrates that a 0. 1μm SOI grooved gate pMOSFET has better characteristics in current-driving capability and sub-threshold slope.
基金the National Natural Science Foundation of China (No. 51605354)the Fundamental Research Funds for the Central Universities (WUT: 2015IVA021)+1 种基金the Innovative Research Team Development Program of Ministry of Education of China (No. IRT13087)the High-end Talent Leading Program of Hubei Province (No. 201286)
文摘The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.
文摘In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were concerned. The modeling was per- formed using Fluent software with the adoption of Shear-Stress Transport （SST） k-ωmodel as the turbulence closure. The coolant was supplied by a single film cooling hole with an inclination angle of 30°. The Mach numbers for the coolant flow and the mainstream flow were fixed at 0 and 0.6, respectively. At three blowing ratios of 0.5, 1.0 and 1.5, the aerodynamic behaviour of the mixing process as well as the heat transfer performance of the film cooling were presented. The numerical results were validated using experimental data extracted from a benchmark test. Good agreements between numerical results and the ex- perimental data were observed. For the film cooling efficiency, it shows that both local and laterally averaged cooling effectiveness can be improved by the non-smooth surface at different blowing ratios. Using the grooved surface, the turbulence intensity upon the plate can be reduced notably, and the mixing between the two flows is weakened due to the reduced turbu lence level. The results indicate that the cooling effectiveness of film cooling can be enhanced by applying the grooved surface.
基金Supported by National Natural Science Foundation of China(Grant No.51575490)National Key Basic Research Development Plan(973 Plan,Grant No.2014CB046404)+1 种基金Key Program of Zhejiang Provincial Natural Science Fund Project(Grant No.LZ15E050002)Zhejiang Provincial Natural Science Foundation of Youth Fund(Grant No.LQ17E050008)
文摘Spiral groove dry gas seal(S?DGS), the most widely used DGS in the world, encounters the problem of high leakage rate and inferior film stability when used in high?speed machinery equipment, which could not be well solved by optimization of geometrical parameters and molded line of spiral groove. A new type of bionic cluster spiral groove DGS(CS?DGS) is proved to have superior film stability than S?DGS at the condition of high?speed and low?pressure numerically. A bionic CS?DGS is experimentally investigated and compared with common S?DGS in order to provide evidence for theoretical study. The film thickness and leakage rate of both bionic spiral groove and common spiral groove DGS are measured and compared with each other and with theoretical values under different closing force at the condition of static pressure, high?speed and low?pressure, and the film stiffness and stiffness?leakage ratio of these two face seals are derived by the relationship between closing force and film thickness at the steady state. Experimental results agree well with the theory that the leakage and stiffness of bionic CS?DGS are superior to that of common S?DGS under the condition of high?speed and low?pressure, with the decreasing amplitude of 20% to 40% and the growth amplitude of 20%, respectively. The opening performance and stiffness characteristics of bionic CS?DGS are inferior to that of common S?DGS when rotation speed equals to 0 r/min. The proposed research provides a new method to measure the axis film stiffness of DGS, and validates the superior performance of bionic CS?DGS at the condition of high?speed and low?pressure experimentally.
基金Project supported by the Joint Fund of the National Natural Science Foundation of China and the China Academy of Engineering Physics(Grant No.U1530261)the National Natural Science Foundation of China(Grant Nos.11402032 and 11502030)the Science Challenge Project,China(Grant No.TZ2016001)
文摘Dynamic failure and ejection characteristics of a periodic grooved Sn surface under unsupported shock loading are studied using a smoothed particle hydrodynamics method. An ＂Eiffel Tower＂ spatial structure is observed, which is com- posed of high-speed jet tip, high-density jet slug, longitudinal tensile sparse zone, and complex broken zone between grooves. It is very different from the spike-bubble structure under supported shocks, and has been validated by detonation loading experiments. In comparison with that under supported shocks at the same peak pressure, the high-speed ejecta decreases obviously, whereas the truncated location of ejecta moves towards the interior of the sample and the total mass of ejecta increases due to the vast existence of low-speed broken materials. The shock wave profile determines mainly the total ejection amount, while the variation of V-groove angle will significantly alter the distribution of middle- and high-speed ejecta, and the maximum ejecta velocity has a linear corretation with the groove angle.
基金Supported by National Key Basic Research Program of China(973Program,Grant No.2012CB026003)National Science and Technology Major Project of China(Grant No.ZX06901)
文摘The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior（steady-state performance and transient performance） of face seals. A numerical finite element method（FEM） model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.
基金National Natural Science Foundation of China,No.81602044Zhejiang Provincial Natural Science Foundation of China,No.LY19H160016 and No.LY17H030001+1 种基金Zhejiang Provincial Public Welfare Technology Application Research Projects,No.2015C33293Research Foundation of Health Bureau of Zhejiang Province,No.2014RCA031,No.2018RC077,No.2015KYA218,and No.2016KYB300
文摘BACKGROUND Groove pancreatitis(GP)is a type of chronic pancreatitis occurring in an anatomic area between the duodenum,head of the pancreas,and common bile duct.Duodenal obstruction is always caused by malignant pancreatic diseases,such as pancreatic head carcinoma,while is rarely induced by benign pancreatic diseases,such as pancreatitis.CASE SUMMARY A 39-year-old man presented with a 1-mo history of upper abdominal discomfort.His concomitant symptoms were abdominal distension,postprandial nausea,and vomiting.Contrast-enhanced computed tomography of the abdomen showed thickening of the intestinal wall with enhancement of the descending segment of the duodenum,which could not be clearly differentiated from the head of the pancreas.Upper gastrointestinal radiographs and gastrointestinal endoscopy showed a complete obstruction of the descending duodenum.An operation found that a 3-cm mass was located in the“groove part”of the pancreas and oppressing the descending duodenum.Pancreaticoduodenectomy was performed to relieve the obstruction and thoroughly remove the pancreatic lesions.The pathologic diagnosis was pancreatitis.The patient had an uneventful recovery with no complications.CONCLUSION Because of the special location and the contracture induced by long-term chronic inflammation,our case reminds surgeons that some benign pancreatic diseases,such as GP,can also present with symptoms similar to those of pancreatic cancer.This knowledge can help to avoid an unnecessary radical operation.
基金Selected from Proceedings of the 7th International Conference on Frontiers of DesignManufacturing(ICFDM'2006)This project is supported by National Basic Research Program of China(973 Program,No.2006CB705400)National Natural Science Foundation of China(No.50575200).
文摘The relationship between pressure distribution and cavitation （noise） inside throttling groove is investigated by numerical simulation and experimental method. A valve pocket with several transducers is performed to detect the pressure distributions inside the valve chamber, and the results fit quite well with the computational fluid dynamics（CFD） analysis. High-speed imaging techniques are employed to investigate the cavitation mechanisms, in particular bubble inception and cluster formation near the throttling groove. A spectrum analyzer is used to measure the sound pressure level of noise generated by the bubble flow. It is found that the pressure distributions inside the groove are sensitive to the valve port configuration and back pressure. The pressure distribution determines the bubble size and number passing through the valve grooves and the sound pressure level of noise induced by collapsing bubbles. The inlet pressure mainly affects the saturation degree of bubbly flow inside the groove and the intensity of sound nressure level accordingly.
