Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the ...Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.展开更多
To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concret...To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concrete T-beams,destructive tests were conducted on full-scale pre-stressed concrete beams.Based on the measurement and ana-lysis of beam deflection,strain,and crack development under various loading levels during the research tests,combined with the verification coefficient indicators specified in the codes,the verification coefficients of bridges at different stages of damage can be examined.The results indicate that the T-beams experience complete,incom-plete linear,and non-linear stages during the destructive test process.In the complete linear elastic stage,both the deflection and bottom strain verification coefficients comply with the specifications,indicating a good structural load-bearing capacity no longer adheres to the code’s requirements.In the non-linear stage,both coefficients exhi-bit a sharp increase,resulting in a further decrease in the structure’s load-bearing capacity.According to the pro-visions of the current code,the beam can be in the incomplete linear stage when both values fall within the code’s specified range.The strain verification coefficient sourced from the compression zone at the bottom of theflange is not recommended for assessing the bridge’s load-bearing capacity.展开更多
Forms enhance both the dynamic and interactive abilities of Web applications and the system complexity. And it is especially important to test forms completely and thoroughly. Therefore, this paper discusses how to ca...Forms enhance both the dynamic and interactive abilities of Web applications and the system complexity. And it is especially important to test forms completely and thoroughly. Therefore, this paper discusses how to carry out the form testing by different methods in the related testing phases. Namely, at first, automatically abstracting forms in the Web pages by parsing the HTML documents; then, ohtai ning the testing data with a certain strategies, such as by requirement specifications, by mining users＇ hefore input informarion or by recording meehanism; and next executing the testing actions automatically due to the well formed test cases; finally, a case study is given to illustrate the convenient and effective of these methods.展开更多
Titanium has been widely used as the implant materials of joint prostheses. This paper simulates the microstructures of the hot forged titanium knee joint component by physical modeling. Ti-6Al-4V ELI were deformed b...Titanium has been widely used as the implant materials of joint prostheses. This paper simulates the microstructures of the hot forged titanium knee joint component by physical modeling. Ti-6Al-4V ELI were deformed by GLEEBLE 2000 hot deforma- tion simulator in compression mode to determine the hot workability, in the range of 900 to 1100℃, with the strain rates between 0.05 to 5 s^(-1). Test results derived from specimens processed by on-cooling test and on-heating test were compared, thereby estimating the effect due to thermal history. The forging process of Ti-6Al-4V ELI tibial base plate of knee joint prostheses was design based on the workability data obtained.展开更多
An accelerated laboratory method（saturated ammonium nitrate solution immersion method） was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic mod...An accelerated laboratory method（saturated ammonium nitrate solution immersion method） was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic modulus, quality, p H value, the Ca/Si, and mineral phase, it could be found that the first cement decalcification degradation process was the decalcification of calcium hydroxide, and then CSH gel, AFm, etc. The secondary ettringite deposition happened and the decalcification degradation depth was proportional to the square root of time. Moreover, the corresponding strength of cement would be gradually reduced, cement rock volume shrinkage occurred, p H values decreased, the surface elastic modulus decreased down to a certain level, and slightly changed and the Ca/Si was 3.1 from the beginning and lasted down to 1.3.展开更多
Brazing is a suitable technology to join different materials such as cemented carbides and steel. Even though this technology has been investigated for many years, insufficient joints can occur easily, as the brazing ...Brazing is a suitable technology to join different materials such as cemented carbides and steel. Even though this technology has been investigated for many years, insufficient joints can occur easily, as the brazing process is very sensitive concerning the handling parameters. Defects such as voids and cracks are hard to detect by commonly used visual inspection methods. Other nondestructive methods such as radiography or ultrasonic testing are usually not economical for the examination of these joints. Studies proved that the electrical resistance has the potential to serve as an effective alternative for the evaluation of brazed joints. In this study, the authors have compared the electrical resistance and the shear strength. For this, cemented carbides were brazed to steel by means of induction heating at an ambient atmosphere. A silver-based filler metal （ BrazeTec 4900 / Ag 449 ） and a flux （ BrazeTec spezial h / FH12） were selected to enable the brazing process. The brazing time and the temperature were varied in order to produce different joint qualities. After brazing, the resistance was measured on each joint with the 4-point probe method to facilitate a high accuracy. The results underline the possibility to use electrical resistance measurements as an effective tool for a quality control of brazed joints.展开更多
Debris flow is one of the major secondary mountain hazards following the earthquake. This study explores the dynamic initiation mechanism of debris flows based on the strength reduction of soils through static and dyn...Debris flow is one of the major secondary mountain hazards following the earthquake. This study explores the dynamic initiation mechanism of debris flows based on the strength reduction of soils through static and dynamic triaxial tests. A series of static and dynamic triaxial tests were conducted on samples in the lab. The samples were prepared according to different grain size distribution, degree of saturation and earthquake magnitudes. The relations of dynamic shear strength, degree of saturation, and number of cycles are summarized through analyzing experimental results. The findings show that the gravelly soil with a wide and continuous gradation has a critical degree of saturation of approximately 87%, above which debris flows will be triggered by rainfall, while the debris flow will be triggered at a critical degree of saturation of about 73% under the effect of rainfall and earthquake(M>6.5). Debris flow initiation is developed in the humidification process, and the earthquake provides energy for triggering debris flows. Debris flows are more likely to be triggered at the relatively low saturation under dynamic loading than under static loading. The resistance of debris flow triggering relies more on internal frication angle than soil cohesion under the effect of rainfall and earthquake. The conclusions provide an experimental analysis method for dynamic initiation mechanism of debris flows.展开更多
A novel micro-opto-electro-mechanical system （MOEMS） accelerometer based on Raman-Nath diffraction is presented. It mainly consists of an FPW delay line oscillator and optical strip waveguides. The fun- damental the...A novel micro-opto-electro-mechanical system （MOEMS） accelerometer based on Raman-Nath diffraction is presented. It mainly consists of an FPW delay line oscillator and optical strip waveguides. The fun- damental theories and principles of the device are introduced briefly. A flexural plate-wave delay-line oscillator is designed to work as an acousto-optic （AO） shifter, which has a Klein-Cook parameter of 0.38. Single-mode optical strip waveguides of 2 μm in width and thicknesses of 0.6 μm are designed by using the effective index method for light transmission. The E^y00 mode waveguide polarizers are designed to ensure the consistency of the light polarization in the waveguides. The fabrication process, based on （100） oriented, 450-#m-thick silicon wafers is proposed in detail, and some difficulties in the process are discussed carefully. At last, a series of process tests are undertaken to solve the proposed problems. The results indicate that the proposed design and fabrication process of the device is dependable and realizable.展开更多
Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach fo...Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach for virtual testability demonstration test based on stochastic process theory is proposed.First,the similarities and differences of fault sample generation between physical testability demonstration test and virtual testability demonstration test are discussed.Second,it is pointed out that the fault occurrence process subject to perfect repair is renewal process.Third,the interarrival time distribution function of the next fault event is given.Steps and flowcharts of fault sample generation are introduced.The number of faults and their occurrence time are obtained by statistical simulation.Finally,experiments are carried out on a stable tracking platform.Because a variety of types of life distributions and maintenance modes are considered and some assumptions are removed,the sample size and structure of fault sample simulation results are more similar to the actual results and more reasonable.The proposed method can effectively guide the fault injection in virtual testability demonstration test.展开更多
A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns ...A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns in the upper crust are interpreted as a series of folds and thrusts, and bivergent reflections in the lower crust may represent a convergence between the Indian and the Eurasian plates.展开更多
基金Science Foundation Ireland(SFI)under Grant Number SFI/16/RC/3918(Confirm)and Marie Sklodowska Curie Grant agreement No.847577 co-fundedthe European Regional Development Fund.Wasif Afzal has received funding from the European Union’s Horizon 2020 research and innovation program under CMC,2023,vol.74,no.22767 Grant agreement Nos.871319,957212from the ECSEL Joint Undertaking(JU)under Grant agreement No 101007350.
文摘Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.
文摘To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concrete T-beams,destructive tests were conducted on full-scale pre-stressed concrete beams.Based on the measurement and ana-lysis of beam deflection,strain,and crack development under various loading levels during the research tests,combined with the verification coefficient indicators specified in the codes,the verification coefficients of bridges at different stages of damage can be examined.The results indicate that the T-beams experience complete,incom-plete linear,and non-linear stages during the destructive test process.In the complete linear elastic stage,both the deflection and bottom strain verification coefficients comply with the specifications,indicating a good structural load-bearing capacity no longer adheres to the code’s requirements.In the non-linear stage,both coefficients exhi-bit a sharp increase,resulting in a further decrease in the structure’s load-bearing capacity.According to the pro-visions of the current code,the beam can be in the incomplete linear stage when both values fall within the code’s specified range.The strain verification coefficient sourced from the compression zone at the bottom of theflange is not recommended for assessing the bridge’s load-bearing capacity.
基金Supported by the National Natural Science Foun-dation of China (60425206 ,90412003 ,60503033)the National Bas-ic Research Program of China (973 Program 2002CB312000 ) Opening Foundation of State Key Laboratory of Software Engineeringin Wuhan University, High Technology Research Project of JiangsuProvince (BG2005032)
文摘Forms enhance both the dynamic and interactive abilities of Web applications and the system complexity. And it is especially important to test forms completely and thoroughly. Therefore, this paper discusses how to carry out the form testing by different methods in the related testing phases. Namely, at first, automatically abstracting forms in the Web pages by parsing the HTML documents; then, ohtai ning the testing data with a certain strategies, such as by requirement specifications, by mining users＇ hefore input informarion or by recording meehanism; and next executing the testing actions automatically due to the well formed test cases; finally, a case study is given to illustrate the convenient and effective of these methods.
文摘Titanium has been widely used as the implant materials of joint prostheses. This paper simulates the microstructures of the hot forged titanium knee joint component by physical modeling. Ti-6Al-4V ELI were deformed by GLEEBLE 2000 hot deforma- tion simulator in compression mode to determine the hot workability, in the range of 900 to 1100℃, with the strain rates between 0.05 to 5 s^(-1). Test results derived from specimens processed by on-cooling test and on-heating test were compared, thereby estimating the effect due to thermal history. The forging process of Ti-6Al-4V ELI tibial base plate of knee joint prostheses was design based on the workability data obtained.
基金Funded by the Natural Science Foundation of Ministry of Housing and Urban-Rural Development of the People's Republic of China(No.2009-K4-27)
文摘An accelerated laboratory method（saturated ammonium nitrate solution immersion method） was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic modulus, quality, p H value, the Ca/Si, and mineral phase, it could be found that the first cement decalcification degradation process was the decalcification of calcium hydroxide, and then CSH gel, AFm, etc. The secondary ettringite deposition happened and the decalcification degradation depth was proportional to the square root of time. Moreover, the corresponding strength of cement would be gradually reduced, cement rock volume shrinkage occurred, p H values decreased, the surface elastic modulus decreased down to a certain level, and slightly changed and the Ca/Si was 3.1 from the beginning and lasted down to 1.3.
文摘Brazing is a suitable technology to join different materials such as cemented carbides and steel. Even though this technology has been investigated for many years, insufficient joints can occur easily, as the brazing process is very sensitive concerning the handling parameters. Defects such as voids and cracks are hard to detect by commonly used visual inspection methods. Other nondestructive methods such as radiography or ultrasonic testing are usually not economical for the examination of these joints. Studies proved that the electrical resistance has the potential to serve as an effective alternative for the evaluation of brazed joints. In this study, the authors have compared the electrical resistance and the shear strength. For this, cemented carbides were brazed to steel by means of induction heating at an ambient atmosphere. A silver-based filler metal （ BrazeTec 4900 / Ag 449 ） and a flux （ BrazeTec spezial h / FH12） were selected to enable the brazing process. The brazing time and the temperature were varied in order to produce different joint qualities. After brazing, the resistance was measured on each joint with the 4-point probe method to facilitate a high accuracy. The results underline the possibility to use electrical resistance measurements as an effective tool for a quality control of brazed joints.
基金sponsored by Natural Science Foundation of China (Grant No. 51269012)Major Projects of Natural Science Foundation of Inner Mongolia Autonomous Region (Grant No. ZD0602)+2 种基金part of National Project 973 "Wenchuan Earthquake Mountain Hazards Formation Mechanism and Risk Control" (Grant No. 2008CB425800)funded by "New Century Excellent Talents" of University of Ministry of Education of China (Grant No. NCET-11-1016)China Scholarship Council
文摘Debris flow is one of the major secondary mountain hazards following the earthquake. This study explores the dynamic initiation mechanism of debris flows based on the strength reduction of soils through static and dynamic triaxial tests. A series of static and dynamic triaxial tests were conducted on samples in the lab. The samples were prepared according to different grain size distribution, degree of saturation and earthquake magnitudes. The relations of dynamic shear strength, degree of saturation, and number of cycles are summarized through analyzing experimental results. The findings show that the gravelly soil with a wide and continuous gradation has a critical degree of saturation of approximately 87%, above which debris flows will be triggered by rainfall, while the debris flow will be triggered at a critical degree of saturation of about 73% under the effect of rainfall and earthquake(M>6.5). Debris flow initiation is developed in the humidification process, and the earthquake provides energy for triggering debris flows. Debris flows are more likely to be triggered at the relatively low saturation under dynamic loading than under static loading. The resistance of debris flow triggering relies more on internal frication angle than soil cohesion under the effect of rainfall and earthquake. The conclusions provide an experimental analysis method for dynamic initiation mechanism of debris flows.
文摘A novel micro-opto-electro-mechanical system （MOEMS） accelerometer based on Raman-Nath diffraction is presented. It mainly consists of an FPW delay line oscillator and optical strip waveguides. The fun- damental theories and principles of the device are introduced briefly. A flexural plate-wave delay-line oscillator is designed to work as an acousto-optic （AO） shifter, which has a Klein-Cook parameter of 0.38. Single-mode optical strip waveguides of 2 μm in width and thicknesses of 0.6 μm are designed by using the effective index method for light transmission. The E^y00 mode waveguide polarizers are designed to ensure the consistency of the light polarization in the waveguides. The fabrication process, based on （100） oriented, 450-#m-thick silicon wafers is proposed in detail, and some difficulties in the process are discussed carefully. At last, a series of process tests are undertaken to solve the proposed problems. The results indicate that the proposed design and fabrication process of the device is dependable and realizable.
基金National Natural Science Foundation of China(51105369)
文摘Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach for virtual testability demonstration test based on stochastic process theory is proposed.First,the similarities and differences of fault sample generation between physical testability demonstration test and virtual testability demonstration test are discussed.Second,it is pointed out that the fault occurrence process subject to perfect repair is renewal process.Third,the interarrival time distribution function of the next fault event is given.Steps and flowcharts of fault sample generation are introduced.The number of faults and their occurrence time are obtained by statistical simulation.Finally,experiments are carried out on a stable tracking platform.Because a variety of types of life distributions and maintenance modes are considered and some assumptions are removed,the sample size and structure of fault sample simulation results are more similar to the actual results and more reasonable.The proposed method can effectively guide the fault injection in virtual testability demonstration test.
基金supported by the National Natural Science Foundation of China (Nos. 40830316, 40874045 and 40704016)the Ministry of Science and Technology of China (Nos. SinoProbe-02, 2006DFA21340)+1 种基金the Ministry of Land and Resources of China (Nos. 2004-06, 200811021)the Open Fund of Key Laboratory of Geo-detection of China Uni-versity of Geosciences (Beijing) (No. GDL0603)
文摘A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns in the upper crust are interpreted as a series of folds and thrusts, and bivergent reflections in the lower crust may represent a convergence between the Indian and the Eurasian plates.
