We have made a gain-switched all-solid-state quasi-continuous-wave （QCW） tunable Ti：sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd：YAG laser. Based on the theory of gain-switch...We have made a gain-switched all-solid-state quasi-continuous-wave （QCW） tunable Ti：sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd：YAG laser. Based on the theory of gain-switching and the study on the influencing factors of the output pulse width, an effective method for obtaining high power and narrow pulse width output is proposed. Through deliberately designing the pump source and the resonator of the Ti：sapphire laser, when the repetition rate is 6 kHz and the length of the cavity is 220 mm, at an incident pump power of 22 W, the tunable Ti：sapphire laser from 700 to 950nm can be achieved. It has a maximum average output power of 5.6W at 800nm and the pulse width of 13.2 ns, giving an optical conversion efficiency of 25.5% from the 532 mn pump laser to the Ti：sapphire laser.展开更多
A quasi-continuous-wave intracavity frequency-doubled Nd:YAG laser which operates at 660 nm is studied. By using a flat-flat laser cavity, 2 Kr-lamps, KTP crystal and an acousto-optically Q-switch, 2-W output power at...A quasi-continuous-wave intracavity frequency-doubled Nd:YAG laser which operates at 660 nm is studied. By using a flat-flat laser cavity, 2 Kr-lamps, KTP crystal and an acousto-optically Q-switch, 2-W output power at 660 nm is obtained. The relationship between laser cavity length and output power is analyzed.展开更多
An InP-based one-dimensional photonic crystal quantum cascade laser is realized. With photo lithography instead of electron beam lithography and using inductively coupled plasma etching, four-period air-semiconductor ...An InP-based one-dimensional photonic crystal quantum cascade laser is realized. With photo lithography instead of electron beam lithography and using inductively coupled plasma etching, four-period air-semiconductor couples are defined as Bragg reflectors at one end of the resonator. The spectral measurement at 80K shows the quasi-continuous-wave operation with the wavelength of 5.36μm for a 22gm-wide and 2mm-long epilayer-up bonded device.展开更多
基金Project supported in part by the National Natural Science Foundation of China (Grant Nos 60637010 and 60671036)the National Basic Research Program of China (Grant No 2007CB310403)Tianjin Applied Fundamental Research Project (Grant No07JCZDJC05900)
文摘We have made a gain-switched all-solid-state quasi-continuous-wave （QCW） tunable Ti：sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd：YAG laser. Based on the theory of gain-switching and the study on the influencing factors of the output pulse width, an effective method for obtaining high power and narrow pulse width output is proposed. Through deliberately designing the pump source and the resonator of the Ti：sapphire laser, when the repetition rate is 6 kHz and the length of the cavity is 220 mm, at an incident pump power of 22 W, the tunable Ti：sapphire laser from 700 to 950nm can be achieved. It has a maximum average output power of 5.6W at 800nm and the pulse width of 13.2 ns, giving an optical conversion efficiency of 25.5% from the 532 mn pump laser to the Ti：sapphire laser.
文摘A quasi-continuous-wave intracavity frequency-doubled Nd:YAG laser which operates at 660 nm is studied. By using a flat-flat laser cavity, 2 Kr-lamps, KTP crystal and an acousto-optically Q-switch, 2-W output power at 660 nm is obtained. The relationship between laser cavity length and output power is analyzed.
文摘An InP-based one-dimensional photonic crystal quantum cascade laser is realized. With photo lithography instead of electron beam lithography and using inductively coupled plasma etching, four-period air-semiconductor couples are defined as Bragg reflectors at one end of the resonator. The spectral measurement at 80K shows the quasi-continuous-wave operation with the wavelength of 5.36μm for a 22gm-wide and 2mm-long epilayer-up bonded device.
