In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrot...In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrothermal crystallization. The Si/Al ratio of SAPO-34 film was used as the only variable to study this material. The composite zeolite material with 0.6Si/Al ratio of SAPO-34 has the largest mesoporous specific surface area and the most suitable acid distribution. The catalytic performance for the MTA process showed that 0.6-SAPO-34/ZSM-5/quartz film has as high as 50.3% benzene-toluenexylene selectivity and 670 min lifetime. The MTA reaction is carried out through the path we designed to effectively avoid the hydrocarbon pool circulation of ZSM-5 zeolite, so as to improve the aromatics selectivity and inhibit the occurrence of deep side reactions to a great extent. The coke deposition behavior was monitored by thermogravimetric analysis and gas chromatograph/mass spectrometer, it is found that with the increase of Si/Al ratio, the active intermediates changed from low-substituted methylbenzene to high-substituted methylbenzene, which led to the rapid deactivation of the catalyst. This work provides a possibility to employ the synergy effect of composite zeolite film synthesizing anti-carbon deposition catalyst in MTA reaction.展开更多
Four ZSM-5 zeolite catalysts with different Si/Al ratios for the catalytic cracking of C4 fractions to produce ethylene and propylene were prepared in this study.First,the adsorption isotherms of pure n-butane and but...Four ZSM-5 zeolite catalysts with different Si/Al ratios for the catalytic cracking of C4 fractions to produce ethylene and propylene were prepared in this study.First,the adsorption isotherms of pure n-butane and butene-1 and their mixtures on these catalysts at 300K and p=0—100kPa were measured using the intelligent gra- vimetric analyzer.The experimental results indicate that the presence of Al can significantly affect the adsorption of butene-1 than that of n-butane on ZSM-5 zeolites.Then,the double Langmuir(DL)model was applied to study the pure gas adsorption on ZSM-5 zeolites for pure n-butane and butene-1.By combining the DL model with the ideal adsorbed solution theory(IAST),the IAST-DL model was applied to model the butene-1(1)/n-butane(2)binary mixture adsorption on ZSM-5 zeolites with different Si/Al ratios.The calculated results are in good agreement with the experimental data,indicating that the IAST-DL model is effective for the present systems.Finally,the adsorp- tion over a wide range of variables was predicted at low pressure and 300K by the model proposed.It is found that the selectivity of butene-1 over n-butane increases linearly with the decrease of Si/Al ratio.A correlation between the selectivity and Si/Al ratio of the sample was proposed at 300K and p=0.08MPa.展开更多
BACKGROUND In spite of developing medical technologies to discover the etiopathogenesis of diseases and developments in the treatment of coronary artery disease, acute coronary syndromes(ACS) continue to be the main c...BACKGROUND In spite of developing medical technologies to discover the etiopathogenesis of diseases and developments in the treatment of coronary artery disease, acute coronary syndromes(ACS) continue to be the main cause of mortality and morbidity worldwide. New cardiac biomarkers and techniques are needed to help provide rapid diagnosis in order to evaluate risk in coronary artery patients.AIM To evaluate the effects of R to S ratio(RSR) in the electrocardiograph of patients with ACS, from the point of the arising complication after myocardial infarction(MI), to three-vessel disease(TVD) and mortality.METHODS The data of 1,296 patients with ACS, who presented to the emergency department of our hospital with chest pain between January 2014 and December2018 and were admitted to the cardiology clinic, were retrospectively included in this cross-sectional cohort study. Patients with an RSR value less than I were assigned to group Ⅰ, while those with an RSR value greater than Ⅰ were assigned to group Ⅱ.RESULTS In our study, 466(35.9%) of the 1,296 patients, 357(38.3%) in group 1 and 109(29.9%) in group 2, were female, with a mean age of 61.56 ± 9.42. ST-elevation MI 573(44.2%), unstable angina(UA) 502(38.7%) and non ST-elevation MI 220(17%)were more prevalent in group Ⅰ. Acute anterior MI 263(20.3) in group Ⅰ, and acute inferior MI 184(14.2) in group Ⅱ was higher. Ischemic heart failure was the most common complication. In group Ⅱ, the red cell distribution width(RDW) was 15.42 ± 1.82, the gensini score was 48.39 ± 36.44, the left ventricular ejection fraction was 41.17 ± 10.41, the TVD was 111(8.5), and the mortality rate was 72(5.6), which was significantly higher than group Ⅰ RDW; in MI with ST and nonST-elevation, in TVD, mortality and complications were high and low in UA. In single and multivariate regression analyses, the variables were associated with ACS risk.CONCLUSION RSR levels may be an auxiliary predictive value in ACS in terms of complications developing after MI, TVD, and mortality.展开更多
A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experime...A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated.The results indicate that the average size ofα-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%.In addition,the eutectic Mg2Si phase in the Mg−10%Al−1%Zn−1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process.With the increasing of compression ratio,the morphology and average size of Mg2Si phases do not change obviously.The morphology modification mechanism of Mg2Si phase in Mg−10%Al−1%Zn−1%Si alloy by SIMA process was also studied.展开更多
Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling proces...Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling process on phase composition and morphology of the whiskers were investigated by TG-DSC（thermo gravimetric-differential scanning calorimeter）, XRD（X-ray diffraction）, and SEM（scanning electron microscope）. Pure K2Ti4O9 potassium titanate whiskers with large length-diameter ratio（r）（over 250） can be obtained at RT/K = 2.9 and TC = 950 ℃.展开更多
In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, whi...In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.展开更多
This study used the germanium/silica(Ge/Si)ratios,together with rare earth elements and other trace elements to infer the siliceous source and sedimentary environment of the siliceous rocks located at the bottom of Yu...This study used the germanium/silica(Ge/Si)ratios,together with rare earth elements and other trace elements to infer the siliceous source and sedimentary environment of the siliceous rocks located at the bottom of Yuertusi Formation in Northwestern Tarim Basin,Keping,China.Previous studies have shown that this siliceous rock stratum formed at the edge of the carbonate platform on the continental shelf.Researchers suggest that these siliceous rocks were formed by hydrothermal activity,but some still draw different conclusions.Understanding the silicon source and depositional environment of these siliceous rocks would help us learn the processes of environmental changes and the causes of biological explosions during this period.The value of germanium/silica ratios of these siliceous rocks is from 0.15 to 0.37 pmol/mol and much lower than above 10|imol/mol values in siliceous rocks that are known formed by hydrothermal activity.All samples are rich in HREE,which differ from hydrothermal siliceous rocks that are rich in LREE.Most samples lack hydrothermal related elements.All these features show that the source of these siliceous rocks'siliceous is not hydrothermal flu ids.The samples'Ce/Ce*range from 0.88 to 1,and Th/U ratios range from 0.01 to 0.36.These features suggest these siliceous rocks were formed in an anoxic environment.Considering all the evidence,we conclude that the siliceous rock stratum at the bottom of the Lower Cambrian Yuertusi Formation in northwest Tarim Basin.Keping,was formed in anoxic seawater at the edge of the carbonate platform on the continental shelf.Its silicon source is seawater instead of hydrothermal fluid.展开更多
In order to recover the SiO_2 contained in the mother liquor in the course ofNaY zeolite synthesis to minimize pollution, the influence of various preparation conditions on thefiltering velocity of gel slurry was stud...In order to recover the SiO_2 contained in the mother liquor in the course ofNaY zeolite synthesis to minimize pollution, the influence of various preparation conditions on thefiltering velocity of gel slurry was studied using the SiO_2/Al_2O_3 gel recovered from the NaYmother liquor in the laboratory. The results of study had shown that at a SiO_2/Al_2O_3 ratio in thefeed equating to 9∶1 the SiO_2 recovery rate and Al_2O_3 utilization rate were high with a fasterflow velocity of the filtrate. The pH value of the system had great impact on the flow velocity offiltrate. Between the two methods for regulating the pH value, the one for formation ofsilica/alumina gel slurry by addition of sulfuric acid prior to adding aluminium sulfate in thesolution could secure a faster filtration velocity. The filtration velocity was decreased in tandemwith increasing SiO_2 concentration in mother liquor, meanwhile an increase in dry filter cakeyield.展开更多
A series of as-synthesized HZSM-5 zeolites with different Si/Al ratios(25,90,120,240 and 400)were post-treated by ultrasonication for an optimum time of 60 min.The morphology,acidity and textural properties of HZSM-5 ...A series of as-synthesized HZSM-5 zeolites with different Si/Al ratios(25,90,120,240 and 400)were post-treated by ultrasonication for an optimum time of 60 min.The morphology,acidity and textural properties of HZSM-5 were characterized with XRD,SEM,N_2 adsorption and NH3-TPD techniques.The catalytic performance was evaluated by dehydration of methanol to dimethyl ether(DME),which is a promising gaseous automotive fuel in future.It was found that the Si/Al ratio of HZSM-5 had considerable impacts on its catalytic performance for dehydration of methanol to DME.Its activity increased with decreasing Si/Al ratio from 400 to 25.Ultrasonication of HZSM-5 could significantly improve its catalytic performance.展开更多
The effect of the Mg/Si ratio of Al-2.5Li-1Cu-0.8Mg-0.8Si,Al-2.5Li-1Cu-1.6Mg-0.8Si,and Al-2.5Li-1Cu-2.4Mg-0.8Si alloys on the microstructure evolution and mechanical properties was investigated.The results show that t...The effect of the Mg/Si ratio of Al-2.5Li-1Cu-0.8Mg-0.8Si,Al-2.5Li-1Cu-1.6Mg-0.8Si,and Al-2.5Li-1Cu-2.4Mg-0.8Si alloys on the microstructure evolution and mechanical properties was investigated.The results show that the primary phases and their morphologies in the as-cast alloys are found to vary with the Mg/Si ratio.The improvement of Mg/Si ratio of as-cast alloys promotes the formation of Mg_(2)Si primary phase at the expense of the AlLiSi primary phase.Moreover,a tiny amount of T_(B)-Al_(7.5)Cu_(4)Li phase transforms into S-Al_(2)CuMg phase with the increase of Mg content.In addition,the increase of Mg/Si ratio also causes the Cu-rich intergranular phase distributed along crystal boundary to Si-rich intergranular phase.After ageing treatment,the precipitation sequence as a function of Mg/Si ratio is as follows:δ/δ'+AlLiSi(Mg/Si is~1)→δ/δ'+β'-Mg_(2)Si+AlLiSi(Mg/Si is~2)→δ/δ'+β'-Mg_(2)Si(Mg/Si is~3).A good combination of strength and ductility can be obtained in Al-2.5Li-1Cu-2.4Mg-0.8Si alloy after solution and ageing.The rod-likeβ'-Mg_(2)Si precipitate has a positive influence on the comprehensive mechanical properties of the alloy.展开更多
Hexagonal GaN films were prepared by nitriding Ga_2O_3 films with flowingammonia. Ga_2O_3 films were deposited on Ga-diffused Si (111) substrates by radio frequency (r.f.)magnetron sputtering. This paper have investig...Hexagonal GaN films were prepared by nitriding Ga_2O_3 films with flowingammonia. Ga_2O_3 films were deposited on Ga-diffused Si (111) substrates by radio frequency (r.f.)magnetron sputtering. This paper have investigated the change of structural properties of GaN filmsnitrided in NH_3 atmosphere at the temperatures of 850, 900, and 950 deg C for 15 min and nitridedat the temperature of 900 deg C for 10, 15, and 20 min, respectively. X-ray diffraction (XRD),scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectronspectroscopy (XPS) were used to analyze the structure, surface morphology and composition ofsynthesized samples. The results reveal that the as-grown films are polycrystalline GaN withhexagonal wurtzite structure and GaN films with the highest crystal quality can be obtained whennitrided at 900 deg C for 15 min.展开更多
An electronic personal dosimeter mainly uses a Si-PIN photodiode as X-and gamma-ray detectors.The photon energy response of this instrument is inconsistent in the case of no correction,which seriously affects the accu...An electronic personal dosimeter mainly uses a Si-PIN photodiode as X-and gamma-ray detectors.The photon energy response of this instrument is inconsistent in the case of no correction,which seriously affects the accurate monitoring of personal dose equivalent H_p(10)parameters for radiation workers.For this reason,in this paper we propose a method of combining composite screen detection technology,multichannel measurement technology,and the channel ratio method to achieve accurate measurement of the personal dose equivalent parameters.According to China National Standard GB/T 13161-2003 and National Verification Regulation JJG 1009-2006,the instrument was tested in the energy range between 48 keV and 1.25 MeV.The experimental results showed that the difference of energy response to ^(137)C_S corrected by the new method was almost constant within ±6.0%,which fulfilled the ±30% requirement of GB/T 13161-2003 and JJG1009-2006.Meanwhile,the method proposed obtained energy information regarding the radiation field.展开更多
A new adaptive technique of r-and h-version for vibration problemsutilizing the matrix per- turbation theory and element energy ratiois proposed. In structural vibration analysis, through the r-conver-gence adaptvie f...A new adaptive technique of r-and h-version for vibration problemsutilizing the matrix per- turbation theory and element energy ratiois proposed. In structural vibration analysis, through the r-conver-gence adaptvie finite element process, mesh optimization can berealized. In the light of the judgement on the changes in themagnitude of the element energy ratio, local refinement can beachieved in the process of h- convergence adaptive finite element sothat more accurate finite element solutions can be obtained with asfew meshes as possible. Many numerical examples are given and theproposed approach is shown to be feasible and effective.展开更多
基金supported by the National Natural Science Foundation of China (51974312, 51974308)the National Key Research & Development Program of China (2019YFE0100100)。
文摘In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrothermal crystallization. The Si/Al ratio of SAPO-34 film was used as the only variable to study this material. The composite zeolite material with 0.6Si/Al ratio of SAPO-34 has the largest mesoporous specific surface area and the most suitable acid distribution. The catalytic performance for the MTA process showed that 0.6-SAPO-34/ZSM-5/quartz film has as high as 50.3% benzene-toluenexylene selectivity and 670 min lifetime. The MTA reaction is carried out through the path we designed to effectively avoid the hydrocarbon pool circulation of ZSM-5 zeolite, so as to improve the aromatics selectivity and inhibit the occurrence of deep side reactions to a great extent. The coke deposition behavior was monitored by thermogravimetric analysis and gas chromatograph/mass spectrometer, it is found that with the increase of Si/Al ratio, the active intermediates changed from low-substituted methylbenzene to high-substituted methylbenzene, which led to the rapid deactivation of the catalyst. This work provides a possibility to employ the synergy effect of composite zeolite film synthesizing anti-carbon deposition catalyst in MTA reaction.
基金Supported by the National Natural Science Foundation of China （Nos.20236010,20476004） and China Petroleum ＆ Chemical Corporation （No.X504023）.
文摘Four ZSM-5 zeolite catalysts with different Si/Al ratios for the catalytic cracking of C4 fractions to produce ethylene and propylene were prepared in this study.First,the adsorption isotherms of pure n-butane and butene-1 and their mixtures on these catalysts at 300K and p=0—100kPa were measured using the intelligent gra- vimetric analyzer.The experimental results indicate that the presence of Al can significantly affect the adsorption of butene-1 than that of n-butane on ZSM-5 zeolites.Then,the double Langmuir(DL)model was applied to study the pure gas adsorption on ZSM-5 zeolites for pure n-butane and butene-1.By combining the DL model with the ideal adsorbed solution theory(IAST),the IAST-DL model was applied to model the butene-1(1)/n-butane(2)binary mixture adsorption on ZSM-5 zeolites with different Si/Al ratios.The calculated results are in good agreement with the experimental data,indicating that the IAST-DL model is effective for the present systems.Finally,the adsorp- tion over a wide range of variables was predicted at low pressure and 300K by the model proposed.It is found that the selectivity of butene-1 over n-butane increases linearly with the decrease of Si/Al ratio.A correlation between the selectivity and Si/Al ratio of the sample was proposed at 300K and p=0.08MPa.
文摘BACKGROUND In spite of developing medical technologies to discover the etiopathogenesis of diseases and developments in the treatment of coronary artery disease, acute coronary syndromes(ACS) continue to be the main cause of mortality and morbidity worldwide. New cardiac biomarkers and techniques are needed to help provide rapid diagnosis in order to evaluate risk in coronary artery patients.AIM To evaluate the effects of R to S ratio(RSR) in the electrocardiograph of patients with ACS, from the point of the arising complication after myocardial infarction(MI), to three-vessel disease(TVD) and mortality.METHODS The data of 1,296 patients with ACS, who presented to the emergency department of our hospital with chest pain between January 2014 and December2018 and were admitted to the cardiology clinic, were retrospectively included in this cross-sectional cohort study. Patients with an RSR value less than I were assigned to group Ⅰ, while those with an RSR value greater than Ⅰ were assigned to group Ⅱ.RESULTS In our study, 466(35.9%) of the 1,296 patients, 357(38.3%) in group 1 and 109(29.9%) in group 2, were female, with a mean age of 61.56 ± 9.42. ST-elevation MI 573(44.2%), unstable angina(UA) 502(38.7%) and non ST-elevation MI 220(17%)were more prevalent in group Ⅰ. Acute anterior MI 263(20.3) in group Ⅰ, and acute inferior MI 184(14.2) in group Ⅱ was higher. Ischemic heart failure was the most common complication. In group Ⅱ, the red cell distribution width(RDW) was 15.42 ± 1.82, the gensini score was 48.39 ± 36.44, the left ventricular ejection fraction was 41.17 ± 10.41, the TVD was 111(8.5), and the mortality rate was 72(5.6), which was significantly higher than group Ⅰ RDW; in MI with ST and nonST-elevation, in TVD, mortality and complications were high and low in UA. In single and multivariate regression analyses, the variables were associated with ACS risk.CONCLUSION RSR levels may be an auxiliary predictive value in ACS in terms of complications developing after MI, TVD, and mortality.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(Nos.41807235,50674038).
文摘A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated.The results indicate that the average size ofα-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%.In addition,the eutectic Mg2Si phase in the Mg−10%Al−1%Zn−1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process.With the increasing of compression ratio,the morphology and average size of Mg2Si phases do not change obviously.The morphology modification mechanism of Mg2Si phase in Mg−10%Al−1%Zn−1%Si alloy by SIMA process was also studied.
基金Funded by the Natural Science Foundation Key Project of Hubei Province(No.2011CDA060)
文摘Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling process on phase composition and morphology of the whiskers were investigated by TG-DSC（thermo gravimetric-differential scanning calorimeter）, XRD（X-ray diffraction）, and SEM（scanning electron microscope）. Pure K2Ti4O9 potassium titanate whiskers with large length-diameter ratio（r）（over 250） can be obtained at RT/K = 2.9 and TC = 950 ℃.
基金Supported by the Henan Outstanding Youth Science Fund (0612002400)
文摘In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.
基金National Key Basic Research Program of China(973 Program,No.2012CB214801).We also thank Prof.Dong Lin at Peking University for the help in the ICP-OES analyses.
文摘This study used the germanium/silica(Ge/Si)ratios,together with rare earth elements and other trace elements to infer the siliceous source and sedimentary environment of the siliceous rocks located at the bottom of Yuertusi Formation in Northwestern Tarim Basin,Keping,China.Previous studies have shown that this siliceous rock stratum formed at the edge of the carbonate platform on the continental shelf.Researchers suggest that these siliceous rocks were formed by hydrothermal activity,but some still draw different conclusions.Understanding the silicon source and depositional environment of these siliceous rocks would help us learn the processes of environmental changes and the causes of biological explosions during this period.The value of germanium/silica ratios of these siliceous rocks is from 0.15 to 0.37 pmol/mol and much lower than above 10|imol/mol values in siliceous rocks that are known formed by hydrothermal activity.All samples are rich in HREE,which differ from hydrothermal siliceous rocks that are rich in LREE.Most samples lack hydrothermal related elements.All these features show that the source of these siliceous rocks'siliceous is not hydrothermal flu ids.The samples'Ce/Ce*range from 0.88 to 1,and Th/U ratios range from 0.01 to 0.36.These features suggest these siliceous rocks were formed in an anoxic environment.Considering all the evidence,we conclude that the siliceous rock stratum at the bottom of the Lower Cambrian Yuertusi Formation in northwest Tarim Basin.Keping,was formed in anoxic seawater at the edge of the carbonate platform on the continental shelf.Its silicon source is seawater instead of hydrothermal fluid.
文摘In order to recover the SiO_2 contained in the mother liquor in the course ofNaY zeolite synthesis to minimize pollution, the influence of various preparation conditions on thefiltering velocity of gel slurry was studied using the SiO_2/Al_2O_3 gel recovered from the NaYmother liquor in the laboratory. The results of study had shown that at a SiO_2/Al_2O_3 ratio in thefeed equating to 9∶1 the SiO_2 recovery rate and Al_2O_3 utilization rate were high with a fasterflow velocity of the filtrate. The pH value of the system had great impact on the flow velocity offiltrate. Between the two methods for regulating the pH value, the one for formation ofsilica/alumina gel slurry by addition of sulfuric acid prior to adding aluminium sulfate in thesolution could secure a faster filtration velocity. The filtration velocity was decreased in tandemwith increasing SiO_2 concentration in mother liquor, meanwhile an increase in dry filter cakeyield.
文摘A series of as-synthesized HZSM-5 zeolites with different Si/Al ratios(25,90,120,240 and 400)were post-treated by ultrasonication for an optimum time of 60 min.The morphology,acidity and textural properties of HZSM-5 were characterized with XRD,SEM,N_2 adsorption and NH3-TPD techniques.The catalytic performance was evaluated by dehydration of methanol to dimethyl ether(DME),which is a promising gaseous automotive fuel in future.It was found that the Si/Al ratio of HZSM-5 had considerable impacts on its catalytic performance for dehydration of methanol to DME.Its activity increased with decreasing Si/Al ratio from 400 to 25.Ultrasonication of HZSM-5 could significantly improve its catalytic performance.
基金financially supported by the National Natural Science Foundation of China(51774105)Touyan Innovation Team Program(XNAUEA5640208420)。
文摘The effect of the Mg/Si ratio of Al-2.5Li-1Cu-0.8Mg-0.8Si,Al-2.5Li-1Cu-1.6Mg-0.8Si,and Al-2.5Li-1Cu-2.4Mg-0.8Si alloys on the microstructure evolution and mechanical properties was investigated.The results show that the primary phases and their morphologies in the as-cast alloys are found to vary with the Mg/Si ratio.The improvement of Mg/Si ratio of as-cast alloys promotes the formation of Mg_(2)Si primary phase at the expense of the AlLiSi primary phase.Moreover,a tiny amount of T_(B)-Al_(7.5)Cu_(4)Li phase transforms into S-Al_(2)CuMg phase with the increase of Mg content.In addition,the increase of Mg/Si ratio also causes the Cu-rich intergranular phase distributed along crystal boundary to Si-rich intergranular phase.After ageing treatment,the precipitation sequence as a function of Mg/Si ratio is as follows:δ/δ'+AlLiSi(Mg/Si is~1)→δ/δ'+β'-Mg_(2)Si+AlLiSi(Mg/Si is~2)→δ/δ'+β'-Mg_(2)Si(Mg/Si is~3).A good combination of strength and ductility can be obtained in Al-2.5Li-1Cu-2.4Mg-0.8Si alloy after solution and ageing.The rod-likeβ'-Mg_(2)Si precipitate has a positive influence on the comprehensive mechanical properties of the alloy.
基金This work was financially supported by the Science Research Foundation of Shandong Jiaotong University (No. Z200503) and the National Natural Science Foundation of China (No. 90301002).
文摘Hexagonal GaN films were prepared by nitriding Ga_2O_3 films with flowingammonia. Ga_2O_3 films were deposited on Ga-diffused Si (111) substrates by radio frequency (r.f.)magnetron sputtering. This paper have investigated the change of structural properties of GaN filmsnitrided in NH_3 atmosphere at the temperatures of 850, 900, and 950 deg C for 15 min and nitridedat the temperature of 900 deg C for 10, 15, and 20 min, respectively. X-ray diffraction (XRD),scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectronspectroscopy (XPS) were used to analyze the structure, surface morphology and composition ofsynthesized samples. The results reveal that the as-grown films are polycrystalline GaN withhexagonal wurtzite structure and GaN films with the highest crystal quality can be obtained whennitrided at 900 deg C for 15 min.
基金supported by the National Key Scientific Instruments To Develop Dedicated(2013YQ090811)
文摘An electronic personal dosimeter mainly uses a Si-PIN photodiode as X-and gamma-ray detectors.The photon energy response of this instrument is inconsistent in the case of no correction,which seriously affects the accurate monitoring of personal dose equivalent H_p(10)parameters for radiation workers.For this reason,in this paper we propose a method of combining composite screen detection technology,multichannel measurement technology,and the channel ratio method to achieve accurate measurement of the personal dose equivalent parameters.According to China National Standard GB/T 13161-2003 and National Verification Regulation JJG 1009-2006,the instrument was tested in the energy range between 48 keV and 1.25 MeV.The experimental results showed that the difference of energy response to ^(137)C_S corrected by the new method was almost constant within ±6.0%,which fulfilled the ±30% requirement of GB/T 13161-2003 and JJG1009-2006.Meanwhile,the method proposed obtained energy information regarding the radiation field.
基金the National Natural Science Foundation of China (No.19872029)
文摘A new adaptive technique of r-and h-version for vibration problemsutilizing the matrix per- turbation theory and element energy ratiois proposed. In structural vibration analysis, through the r-conver-gence adaptvie finite element process, mesh optimization can berealized. In the light of the judgement on the changes in themagnitude of the element energy ratio, local refinement can beachieved in the process of h- convergence adaptive finite element sothat more accurate finite element solutions can be obtained with asfew meshes as possible. Many numerical examples are given and theproposed approach is shown to be feasible and effective.
