An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on ...An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on the strain cyclic characteristics were studied.Under the asymmetrical stress cycling, the effects of stress amplitude, mean stress,stress loading rate and their histories on the ratcheting were analyzed. The interaction between strain cycling and stress cycling was also discussed. It is shown that either the cyclic characteristics under strain cycling or the ratcheting under asymmetrical stress cycling depends not only on the cumnt loading state, but also on the previous loading history. Some significant results are obtained.展开更多
A new superposed rule of Mroz’s kinematic hardening rule andZiegler’s kinematic hardening rule based on two-surface model is proposed in thepaper.Some experimental results on ratchetting of 2014-T6 aluminum alloy ar...A new superposed rule of Mroz’s kinematic hardening rule andZiegler’s kinematic hardening rule based on two-surface model is proposed in thepaper.Some experimental results on ratchetting of 2014-T6 aluminum alloy are pre-dicted very well under multiaxial loading.In addition the conformability of the modelis discussed for transient cyclic hardening under two kinds of nonproportional cyclicloading paths’,i.e.square and rhombic path.展开更多
Based on the experimental results of the ratcheting for SS304 stainless steel, a new visco-plastic cyclic constitutive model was established to describe the uniaxial and multiaxial ratcheting of the material at room a...Based on the experimental results of the ratcheting for SS304 stainless steel, a new visco-plastic cyclic constitutive model was established to describe the uniaxial and multiaxial ratcheting of the material at room and elevated temperatures within the framework of unified visco-plasticity. In the model, the temperature dependence of the ratcheting was emphasized, and the dynamic strain aging occurred in the temperature range of 400-600C for the material was taken into account particularly. Finally, the prediction capability of the developed model was checked by comparing to the corresponding experimental results.展开更多
To quickly predict the fatigue limit of 6061 aluminum alloy,two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading,respectively,were proposed.The tem...To quickly predict the fatigue limit of 6061 aluminum alloy,two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading,respectively,were proposed.The temperature evolutions during static and cyclic loadings were both measured by infrared thermography.Fatigue tests show that the temperature evolution was closely related to the cyclic loading,and the cyclic loading range can be divided into three sections according to the regular of temperature evolution in different section.The mechanism of temperature evolution under different cyclic loadings was also analyzed due to the thermoelastic,viscous,and thermoplastic effects.Additionally,ratcheting strain under cyclic loading was also measured,and the results show that the evolution of the ratcheting strain under cyclic loading above the fatigue limit undergone three stages:the first increasing stage,the second steady state,and the final abrupt increase stage.The fatigue limit of the 6061 aluminum alloy was quickly estimated based on transition point of linear fitting of temperature increase and the steady value of ratcheting strain difference.Besides,it is feasible and quick of the two methods by the proof of the traditional S-N curve.展开更多
An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading. The strain cyclic characteristics were researched ...An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled circular load path. The ratcheting was investigated for the stress-controlled multiaxial circular, elliptical and rhombic load paths with different mean stresses, stress amplitudes and their histories. The experiment shows that U71Mn rail steel features the cyclic non-hardening/softening, and its strain cyclic characteristics depend greatly on the strain amplitude but slightly on its history. However, the ratcheting of U71Mn rail steel depends greatly not only on the values of mean stress and stress amplitude, but also on their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting. The ratcheting changes with the different loading paths.展开更多
An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched ...An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled uniaxial tension-compression and multiaxial circular paths of loading. The ratcheting tests were conducted for the stress-controlled uniaxial tensioncompression and multiaxial circular, rhombic and linear paths of loading with different mean stresses, stress amplitudes and histories. The experiment results show that 316L stainless steel features the cyclic hardening, and its strain cyclic characteristics depend on the strain amplitude and its history apparently. The ratcheting of 316L stainless steel depends greatly on the values of mean stress, stress amplitude and their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting.展开更多
We study the Brownian ratchet conditions starting with Feynman’s proposal. We show that this proposal is incomplete, and is in fact non-workable. We give the correct model for this ratchet.
Using time-dependent Ginzburg-Landau formalism,we investigate the multiple reversals of ratchet effects in an unpatterned superconducting strip by the tilted dynamic pinning potential.In the case of collinear sliding ...Using time-dependent Ginzburg-Landau formalism,we investigate the multiple reversals of ratchet effects in an unpatterned superconducting strip by the tilted dynamic pinning potential.In the case of collinear sliding potential and Lorentz force,vortices are always confined in the channels induced by sliding potential.However,due to the inclination angle of sliding pinning potential with respect to the Lorentz force,vortices could be driven out of the channels,and unexpected results with multiple reversals of vortex rectifications are observed.The mechanism of multiple reversals of vortex rectifications is explored by analyzing different vortex motion scenarios with increasing ac current amplitudes.The multiple reversals of transverse and longitudinal ratchet effects can be highly controlled by ac amplitude and dynamic pinning velocity.What's more,at certain large current the ratchet effect reaches strongest within a wide range of pinning sliding velocity.展开更多
Computation and amplification processes based on Networks of Chemical Reactions are at the heart of our understanding of the regulation and error correction of life systems. The recent advances in DNA nanotechnology, ...Computation and amplification processes based on Networks of Chemical Reactions are at the heart of our understanding of the regulation and error correction of life systems. The recent advances in DNA nanotechnology, with the creation of the modular structures origamis and the development of dynamical networks using the toe hold mediated strand displacement, open fertile areas to construct Hierarchical Cascades of Chemical Reactions with an increasing complexity inspired from systems in biology. DNA strands have the great advantage to design autonomous and homogeneous Networks of Chemical Reactions leaving aside companion chemical reactions as it occurs in biological systems. In the present paper, we use the Fokker Planck equation to extract predictions that address a wider class of systems beyond the case of diluted solutions. We introduce the concept of toehold strength and output strength that leads to an exponential square dependence of the toehold strength divided by the output strength on the escape rate and the probability for the output strand to leave the gate. We highlight the influence of the boundary conditions that may have an important consequence in confined environment when modular structures like origamis are employed.展开更多
<正> Transport of a Brownian particle moving in a periodic potential is investigated in the presence of anasymmetric unbiased external force.The asymmetry of the external force and the asymmetry of the potential...<正> Transport of a Brownian particle moving in a periodic potential is investigated in the presence of anasymmetric unbiased external force.The asymmetry of the external force and the asymmetry of the potential are thetwo ways of inducing a net current.It is found that the competition of the spatial asymmetry of potential with thetemporal asymmetry of the external force leads to the phenomena like current reversal.The competition between thetwo opposite driving factors is a necessary but not a sufficient condition for current reversals.展开更多
Achieving well-controlled directional steering of liquids is of great significance for both fundamental study and practical applications, such as microfluidics, biomedicine, and heat management. Recent advances allow ...Achieving well-controlled directional steering of liquids is of great significance for both fundamental study and practical applications, such as microfluidics, biomedicine, and heat management. Recent advances allow liquids with different surface tensions to select their spreading directions on a same surface composed of macro ratchets with dual reentrant curvatures. Nevertheless, such intriguing directional steering function relies on 3D printed sophisticated structures and additional polishing process to eliminate the inevitable microgrooves-like surface deficiency generated from printing process, which increases the manufacturing complexity and severally hinders practical applications. Herein, we developed a simplified dual-scale structure that enables directional liquid steering via a straightforward 3D printing process without the need of any physical and chemical post-treatment. The dual-scale structure consists of macroscale tilt ratchet equipped with a reentrant tip and microscale grooves that decorated on the whole surface along a specific orientation. Distinct from conventional design requiring the elimination of microgrooves-like surface deficiency, we demonstrated that the microgrooves of dual-scale structure play a key role in delaying or promoting the local flow of liquids, tuning of which could even enable liquids select different spreading pathways. This study provides a new insight for developing surfaces with tunable multi-scale structures, and also advances our fundamental understanding of the interaction between liquid spreading dynamics and surface topography.展开更多
The uniaxial ratchetting-fatigue interaction of extruded AZ31 magnesium(Mg)alloy is investigated by uniaxial stress-controlled cyclic tests at room temperature and with addressing the roles of different plastic deform...The uniaxial ratchetting-fatigue interaction of extruded AZ31 magnesium(Mg)alloy is investigated by uniaxial stress-controlled cyclic tests at room temperature and with addressing the roles of different plastic deformation mechanisms.Different stress levels are prescribed to reflect the cyclic plasticity of the alloy controlled by diverse deformation mechanisms(i.e.,dislocation slipping,deformation twinning and detwinning ones),and then the influences of stress level and stress rate on the ratchetting and fatigue life are discussed.The experimental results demonstrate that different evolution characteristics of whole-life ratchetting and fatigue life presented during cyclic tests with various mean stresses,stress amplitudes and stress rates are determined by the dominated plastic deformation mechanisms.It’s worth noting that the ratchetting can occur in the compressive direction even in the cyclic tests with a positive(tensile)mean stress,and the fatigue life increases first and then decreases with the increase of mean stress on account of the interaction between dislocation slipping and twinning/detwinning mechanisms.Comparing the fatigue lives obtained in the asymmetric stress-controlled and symmetrical strain-controlled cycle tests,it is seen that the ratchetting deformation causes an additional damage,and then leads to a shortening of fatigue life.展开更多
This paper proposes a novel unified visco-plastic constitutive model for uniaxial ratcheting behaviors. The cyclic deformation of the material presents remarkable time-dependence and history memory phenomena. The frac...This paper proposes a novel unified visco-plastic constitutive model for uniaxial ratcheting behaviors. The cyclic deformation of the material presents remarkable time-dependence and history memory phenomena. The fractional(fractional-order)derivative is an efficient tool for modeling these phenomena. Therefore, we develop a cyclic fractional-order unified visco-plastic(FVP) constitutive model. Specifically, within the framework of the cyclic elasto-plastic theory, the fractional derivative is used to describe the accumulated plastic strain rate and nonlinear kinematic hardening rule based on the Ohno-Abdel-Karim model. Moreover, a new radial return method for the back stress is developed to describe the unclosed hysteresis loops of the stress-strain properly.The capacity of the FVP model used to predict the cyclic deformation of the SS304 stainless steel is verified through a comparison with the corresponding experimental data found in the literature(KANG, G. Z., KAN, Q. H., ZHANG, J., and SUN, Y. F. Timedependent ratcheting experiments of SS304 stainless steel. International Journal of Plasticity, 22(5), 858–894(2006)). The FVP model is shown to be successful in predicting the rate-dependent ratcheting behaviors of the SS304 stainless steel.展开更多
文摘An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on the strain cyclic characteristics were studied.Under the asymmetrical stress cycling, the effects of stress amplitude, mean stress,stress loading rate and their histories on the ratcheting were analyzed. The interaction between strain cycling and stress cycling was also discussed. It is shown that either the cyclic characteristics under strain cycling or the ratcheting under asymmetrical stress cycling depends not only on the cumnt loading state, but also on the previous loading history. Some significant results are obtained.
基金The project supported by the National Natural Science Foundation of China
文摘A new superposed rule of Mroz’s kinematic hardening rule andZiegler’s kinematic hardening rule based on two-surface model is proposed in thepaper.Some experimental results on ratchetting of 2014-T6 aluminum alloy are pre-dicted very well under multiaxial loading.In addition the conformability of the modelis discussed for transient cyclic hardening under two kinds of nonproportional cyclicloading paths’,i.e.square and rhombic path.
基金supported by the Theoretical Research Fund of Sichuan Province(No.03JY029-062-2)the Scientific Research Foundation for the Returned Overseas Chinese Scholars(SRF-ROCS),State Education Ministry of China(No.2003-406-01).
文摘Based on the experimental results of the ratcheting for SS304 stainless steel, a new visco-plastic cyclic constitutive model was established to describe the uniaxial and multiaxial ratcheting of the material at room and elevated temperatures within the framework of unified visco-plasticity. In the model, the temperature dependence of the ratcheting was emphasized, and the dynamic strain aging occurred in the temperature range of 400-600C for the material was taken into account particularly. Finally, the prediction capability of the developed model was checked by comparing to the corresponding experimental results.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51505322 and 51775366)the Natural Science Foundation of Shanxi Province,China(No.201801D221137).
文摘To quickly predict the fatigue limit of 6061 aluminum alloy,two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading,respectively,were proposed.The temperature evolutions during static and cyclic loadings were both measured by infrared thermography.Fatigue tests show that the temperature evolution was closely related to the cyclic loading,and the cyclic loading range can be divided into three sections according to the regular of temperature evolution in different section.The mechanism of temperature evolution under different cyclic loadings was also analyzed due to the thermoelastic,viscous,and thermoplastic effects.Additionally,ratcheting strain under cyclic loading was also measured,and the results show that the evolution of the ratcheting strain under cyclic loading above the fatigue limit undergone three stages:the first increasing stage,the second steady state,and the final abrupt increase stage.The fatigue limit of the 6061 aluminum alloy was quickly estimated based on transition point of linear fitting of temperature increase and the steady value of ratcheting strain difference.Besides,it is feasible and quick of the two methods by the proof of the traditional S-N curve.
基金Financially supported by the National Natural Science Foundation of China(197T2041)the Excellent Youth Fund of Sichuan Province.
文摘An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled circular load path. The ratcheting was investigated for the stress-controlled multiaxial circular, elliptical and rhombic load paths with different mean stresses, stress amplitudes and their histories. The experiment shows that U71Mn rail steel features the cyclic non-hardening/softening, and its strain cyclic characteristics depend greatly on the strain amplitude but slightly on its history. However, the ratcheting of U71Mn rail steel depends greatly not only on the values of mean stress and stress amplitude, but also on their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting. The ratcheting changes with the different loading paths.
文摘An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled uniaxial tension-compression and multiaxial circular paths of loading. The ratcheting tests were conducted for the stress-controlled uniaxial tensioncompression and multiaxial circular, rhombic and linear paths of loading with different mean stresses, stress amplitudes and histories. The experiment results show that 316L stainless steel features the cyclic hardening, and its strain cyclic characteristics depend on the strain amplitude and its history apparently. The ratcheting of 316L stainless steel depends greatly on the values of mean stress, stress amplitude and their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting.
文摘We study the Brownian ratchet conditions starting with Feynman’s proposal. We show that this proposal is incomplete, and is in fact non-workable. We give the correct model for this ratchet.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11702034,11972298,and 11702218)the China Postdoctoral Science Foundation(Grant No.2019M663812)+1 种基金the Fundamental Research Funds for the Central Universities,China(Grant Nos.300102129104,3102018zy013,and 3102017jc01003)the Young Talent Fund of University Association for Science and Technology in Shaanxi,China(Grant Nos.20180503 and 20180501).
文摘Using time-dependent Ginzburg-Landau formalism,we investigate the multiple reversals of ratchet effects in an unpatterned superconducting strip by the tilted dynamic pinning potential.In the case of collinear sliding potential and Lorentz force,vortices are always confined in the channels induced by sliding potential.However,due to the inclination angle of sliding pinning potential with respect to the Lorentz force,vortices could be driven out of the channels,and unexpected results with multiple reversals of vortex rectifications are observed.The mechanism of multiple reversals of vortex rectifications is explored by analyzing different vortex motion scenarios with increasing ac current amplitudes.The multiple reversals of transverse and longitudinal ratchet effects can be highly controlled by ac amplitude and dynamic pinning velocity.What's more,at certain large current the ratchet effect reaches strongest within a wide range of pinning sliding velocity.
文摘Computation and amplification processes based on Networks of Chemical Reactions are at the heart of our understanding of the regulation and error correction of life systems. The recent advances in DNA nanotechnology, with the creation of the modular structures origamis and the development of dynamical networks using the toe hold mediated strand displacement, open fertile areas to construct Hierarchical Cascades of Chemical Reactions with an increasing complexity inspired from systems in biology. DNA strands have the great advantage to design autonomous and homogeneous Networks of Chemical Reactions leaving aside companion chemical reactions as it occurs in biological systems. In the present paper, we use the Fokker Planck equation to extract predictions that address a wider class of systems beyond the case of diluted solutions. We introduce the concept of toehold strength and output strength that leads to an exponential square dependence of the toehold strength divided by the output strength on the escape rate and the probability for the output strand to leave the gate. We highlight the influence of the boundary conditions that may have an important consequence in confined environment when modular structures like origamis are employed.
文摘<正> Transport of a Brownian particle moving in a periodic potential is investigated in the presence of anasymmetric unbiased external force.The asymmetry of the external force and the asymmetry of the potential are thetwo ways of inducing a net current.It is found that the competition of the spatial asymmetry of potential with thetemporal asymmetry of the external force leads to the phenomena like current reversal.The competition between thetwo opposite driving factors is a necessary but not a sufficient condition for current reversals.
基金financial support from the ITF(GHP/021/19SZ)Shenzhen Science and Technology Innovation Council (9240061 and JCYJ20200109143206663)+3 种基金National Natural Science Foundation of China (No.51975502)Research Grants Council of Hong Kong(No. C1006-20WF, No. 11213320)Science and Technology Planning Project of Guangdong Province (No.2021A0505110002)Shenzhen-Hong Kong Joint Innovation Project (No. SGDX2019091716460172)。
文摘Achieving well-controlled directional steering of liquids is of great significance for both fundamental study and practical applications, such as microfluidics, biomedicine, and heat management. Recent advances allow liquids with different surface tensions to select their spreading directions on a same surface composed of macro ratchets with dual reentrant curvatures. Nevertheless, such intriguing directional steering function relies on 3D printed sophisticated structures and additional polishing process to eliminate the inevitable microgrooves-like surface deficiency generated from printing process, which increases the manufacturing complexity and severally hinders practical applications. Herein, we developed a simplified dual-scale structure that enables directional liquid steering via a straightforward 3D printing process without the need of any physical and chemical post-treatment. The dual-scale structure consists of macroscale tilt ratchet equipped with a reentrant tip and microscale grooves that decorated on the whole surface along a specific orientation. Distinct from conventional design requiring the elimination of microgrooves-like surface deficiency, we demonstrated that the microgrooves of dual-scale structure play a key role in delaying or promoting the local flow of liquids, tuning of which could even enable liquids select different spreading pathways. This study provides a new insight for developing surfaces with tunable multi-scale structures, and also advances our fundamental understanding of the interaction between liquid spreading dynamics and surface topography.
基金Financial support from National Natural Science Foundation of China(11532010)。
文摘The uniaxial ratchetting-fatigue interaction of extruded AZ31 magnesium(Mg)alloy is investigated by uniaxial stress-controlled cyclic tests at room temperature and with addressing the roles of different plastic deformation mechanisms.Different stress levels are prescribed to reflect the cyclic plasticity of the alloy controlled by diverse deformation mechanisms(i.e.,dislocation slipping,deformation twinning and detwinning ones),and then the influences of stress level and stress rate on the ratchetting and fatigue life are discussed.The experimental results demonstrate that different evolution characteristics of whole-life ratchetting and fatigue life presented during cyclic tests with various mean stresses,stress amplitudes and stress rates are determined by the dominated plastic deformation mechanisms.It’s worth noting that the ratchetting can occur in the compressive direction even in the cyclic tests with a positive(tensile)mean stress,and the fatigue life increases first and then decreases with the increase of mean stress on account of the interaction between dislocation slipping and twinning/detwinning mechanisms.Comparing the fatigue lives obtained in the asymmetric stress-controlled and symmetrical strain-controlled cycle tests,it is seen that the ratchetting deformation causes an additional damage,and then leads to a shortening of fatigue life.
基金Project supported by the National Natural Science Foundation of China(Nos.11790282,U1534204,and 11472179)the Natural Science Foundation of Hebei Province of China(No.A2016210099)
文摘This paper proposes a novel unified visco-plastic constitutive model for uniaxial ratcheting behaviors. The cyclic deformation of the material presents remarkable time-dependence and history memory phenomena. The fractional(fractional-order)derivative is an efficient tool for modeling these phenomena. Therefore, we develop a cyclic fractional-order unified visco-plastic(FVP) constitutive model. Specifically, within the framework of the cyclic elasto-plastic theory, the fractional derivative is used to describe the accumulated plastic strain rate and nonlinear kinematic hardening rule based on the Ohno-Abdel-Karim model. Moreover, a new radial return method for the back stress is developed to describe the unclosed hysteresis loops of the stress-strain properly.The capacity of the FVP model used to predict the cyclic deformation of the SS304 stainless steel is verified through a comparison with the corresponding experimental data found in the literature(KANG, G. Z., KAN, Q. H., ZHANG, J., and SUN, Y. F. Timedependent ratcheting experiments of SS304 stainless steel. International Journal of Plasticity, 22(5), 858–894(2006)). The FVP model is shown to be successful in predicting the rate-dependent ratcheting behaviors of the SS304 stainless steel.