This paper presents an overview of experimental investigations conducted at China University of Mining and Technology Beijing(CUMTB) on roadway excavation using large-scale geomechanical model tests.The simulated sedi...This paper presents an overview of experimental investigations conducted at China University of Mining and Technology Beijing(CUMTB) on roadway excavation using large-scale geomechanical model tests.The simulated sedimentary rocks are composed by alternating layers of sandstone, mudstone and coal seam inclined at varied angles with respect to the horizontal including 0°, 45°, 60°, and 90°. During the excavation, infrared thermography was employed to detect the thermal response of the surrounding rocks under excavation. The obtained raw thermograms were processed using denoising algorithm, data reduction procedure and Fourier analysis. The infrared temperature(IRT) characterizes the overall rock response; the processed thermal images represent the structural behavior, and the Fourier spectrum describes damage development in the frequency domain. Deeper understanding was achieved by the comparative analyses of excavation in differently inclined rock masses using the image features of IRTs, thermal images and Fourier spectra.展开更多
This paper focuses on the formation mechanism of fractures induced by excavation of a gallery in soft sedimentary rocks in the Horonobe area of Japan. Detailed fracture mapping of the gallery indicates that the fractu...This paper focuses on the formation mechanism of fractures induced by excavation of a gallery in soft sedimentary rocks in the Horonobe area of Japan. Detailed fracture mapping of the gallery indicates that the fractures consist of both pre-existing shear fractures and excavation damaged zone （EDZ） fractures. EDZ fractures correspond to weak planes associated with bedding planes or transgranular cracks. The EDZ fractures terminate against pre-existing shear fractures. Therefore, even for excavations in soft sedimentary rocks, formation of the EDZ fractures are controlled by pre-existing fractures and earlier weak planes.展开更多
Evidence for a mantle and/or basaltic component in KT boundary distal ejecta is apparently inconsistent with ejection from Chicxulub Crater since it is located on;5km thick continental crust（De Paolo et al.,1983;Mont...Evidence for a mantle and/or basaltic component in KT boundary distal ejecta is apparently inconsistent with ejection from Chicxulub Crater since it is located on;5km thick continental crust（De Paolo et al.,1983;Montanari et al.,1983;Hildebrand and Boynton,1988,1990）.Evidence for mafic/ultramafic target rocks was reinforced by discovery of chromites,some with shock planar deformation features（PDF）,in impact layer samples from sites in southern Colorado and eastern Wyoming（Bohor et al.,1990）.However,until now it was unclear whether the chromites originated with an impactor or with terrestrial target rocks.To this end,high-precision 54Cr/52Cr isotope ratios were measured on KT boundary chromites along with known terrestrial chromites.We find a terrestrial 54Cr/52Cr ratio in KT boundary chromites from impact layer samples collected at the above sites over the last several years（Fig.1）.Ejected terrestrial chromites suggest the impact sampled terrestrial mafic and/or ultramafic target rocks not known to exist in the Chicxulub target area.展开更多
Rock burst is a kind of geological disaster in rock excavation of high stress areas.To evaluate intensity of rock burst,the maximum shear stress,uniaxial compressive strength,uniaxial tensile strength and rock elastic...Rock burst is a kind of geological disaster in rock excavation of high stress areas.To evaluate intensity of rock burst,the maximum shear stress,uniaxial compressive strength,uniaxial tensile strength and rock elastic energy index were selected as input factors,and burst pit depth as output factor.The rock burst prediction model was proposed according to the genetic algorithms and extreme learning machine.The effect of structural surface was taken into consideration.Based on the engineering examples of tunnels,the observed and collected data were divided into the training set,validation set and prediction set.The training set and validation set were used to train and optimize the model.Parameter optimization results are presented.The hidden layer node was450,and the fitness of the predictions was 0.0197 under the optimal combination of the input weight and offset vector.Then,the optimized model is tested with the prediction set.Results show that the proposed model is effective.The maximum relative error is4.71%,and the average relative error is 3.20%,which proves that the model has practical value in the relative engineering.展开更多
This study is a part of an overall research project on the effects of microwave(MW)irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University.For the first time,this pap...This study is a part of an overall research project on the effects of microwave(MW)irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University.For the first time,this paper highlights a comprehensive investigation on the effects of microwave irradiation on Canadian kimberlites.Potential contribution to the continuous rock excavation and rock weakening effect prior to implementation of mechanical techniques was explored.Two different kimberlite rocks,i.e.volcaniclastic kimberlite(VK)and hypabyssal kimberlite(HK),and granite samples were studied.Some important physical properties of the rock samples were measured including rock quality designation(RQD),specific gravity,porosity,and specific heat capacity.Rock samples were treated for various exposure times using a multi-mode MWunit at different power levels ranging from 2 kW to 15 kW.The effect of MW irradiation on rock samples was investigated.The results indicate that the mechanical properties including unconfined compressive strength(UCS)and Brazilian tensile strength(BTS)were significantly dropped as a result of MWirradiation.Finally,the effect on rock abrasivity using the Cerchar abrasivity index(CAI)has also been discussed.展开更多
The complicated rock structures and the stability of surrounding rocks of the underground powerhouse were the key rock mechanical problems in Shuibuya hydropower station.In order to overcome the related rock mechanica...The complicated rock structures and the stability of surrounding rocks of the underground powerhouse were the key rock mechanical problems in Shuibuya hydropower station.In order to overcome the related rock mechanical problems encountered during its construction,a comprehensive research was carried out for the underground powerhouse in Shuibuya hydropower station based on a detailed geological survey.It covers the investigations on the initial in-situ stress distribution features,rock mechanical properties,engineering rock mass classifications by different methods,numerical modeling for stability and support analysis,proper measures for rock excavation and support.The results show that the rock excavations of the underground powerhouse under the given geological conditions can be controlled effectively.Some measures,suggested by the designers,are proved to be rational and effective.These measures mainly consist of:(1) the soft rock replacements by concrete in local area below the crane beam,(2) the shotcrete and reinforcement by rock bolts and anchor cables in surrounding rocks,and (3) 2 m concrete placement on the rock bench between adjacent tailrace tubes.The engineering practice shows that the treated surrounding rocks have a good overall stability.The deformation behaviors observed by safety equipments are within the designing limits.The research conclusions on the related rock mechanical problems,prior to the underground powerhouse excavations,are reliable.展开更多
Over the past twenty years, there has been a growing interest in the development of numerical modelsthat can realistically capture the progressive failure of rock masses. In particular, the investigation ofdamage deve...Over the past twenty years, there has been a growing interest in the development of numerical modelsthat can realistically capture the progressive failure of rock masses. In particular, the investigation ofdamage development around underground excavations represents a key issue in several rock engineeringapplications, including tunnelling, mining, drilling, hydroelectric power generation, and the deepgeological disposal of nuclear waste. The goal of this paper is to show the effectiveness of a hybrid finitediscreteelement method （FDEM） code to simulate the fracturing mechanisms associated with theexcavation of underground openings in brittle rock formations. A brief review of the current state-of-theartmodelling approaches is initially provided, including the description of selecting continuum- anddiscontinuum-based techniques. Then, the influence of a number of factors, including mechanical and insitu stress anisotropy, as well as excavation geometry, on the simulated damage is analysed for threedifferent geomechanical scenarios. Firstly, the fracture nucleation and growth process under isotropicrock mass conditions is simulated for a circular shaft. Secondly, the influence of mechanical anisotropy onthe development of an excavation damaged zone （EDZ） around a tunnel excavated in a layered rockformation is considered. Finally, the interaction mechanisms between two large caverns of an undergroundhydroelectric power station are investigated, with particular emphasis on the rock mass responsesensitivity to the pillar width and excavation sequence. Overall, the numerical results indicate that FDEMsimulations can provide unique geomechanical insights in cases where an explicit consideration offracture and fragmentation processes is of paramount importance. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
It is essential to cast light on the construction risks in tunnel excavations through the fault-fracture zone(FFZ).This study adopts the material point method(MPM)to simulate the failure responses of a rock tunnel fac...It is essential to cast light on the construction risks in tunnel excavations through the fault-fracture zone(FFZ).This study adopts the material point method(MPM)to simulate the failure responses of a rock tunnel face during excavation through the FFZ.A numerical study was conducted to compare a physical model test and validate the feasibility of using the MPM in simulating tunnel face failure.One hundred ninety numerical simulation cases were constructed to represent a rock tunnel excavation project with different site con-figurations.The simulation results suggest that the cohesion and the friction angle significantly influence failure responses.The tunnel cover depth can magnify the failure responses,and the FFZ thickness significantly affects the mobilized rock mass volume when the FFZ consists of a weak rock mass.The numerical simulation results suggest three deformation patterns:face bulge,partial failure,and slide collapse.The failure responses can be characterized by stress arch,slip surface,angle of reposing,and influence range.The insights suggested by the face failure responses during excavation through the FFZ can aid field engineers in determining the scope of possible damage,and in establishing emergency measures to minimize losses if such failure occurs.展开更多
Geometrical analyses of 3930 potholes （3565 fluvial potholes, 237 marine potholes and 128 hillside potholes） from 33 localities in the world reveal a consistent, linear relationship： D Nh ＋ M, where h and D are, r...Geometrical analyses of 3930 potholes （3565 fluvial potholes, 237 marine potholes and 128 hillside potholes） from 33 localities in the world reveal a consistent, linear relationship： D Nh ＋ M, where h and D are, respectively, the depth and mean diameter of pothole, M is a critical size of the initial concavities （seminal potholes） that subsequently underwent growth, and N is the ratio of diameter expanding （wall erosion） speed to deepening （floor abrasion） speed. For the stream potholes, N is generally less than 1 with an average value of 0.67, M varies from 5.3 cm to 40.5 cm with an average of 20 cm, and N decreases gently with increasing M. However, the marine and hillside potholes are generally characterized by N 〉 1 and M 〈 10-14 cm, and a power-law relationship N 4.24M o.78 （coefficient of determination R2 0.75, M is in cm） exists. The results indicate that depth increases faster than diameter for stream potholes due to the larger size of grinding stones （〉5-10 cm）, while depth increases slower than diameter for marine potholes and hillside potholes due to the smaller size of grinding stones （〈5-10 cm）. The pothole h-D relationship is nearly independent of rock type. Knowledge of the pothole depth-diameter relationship is useful in a number of contexts, including simulation of hydraulic dynamics, theoretical considerations of erosion, comprehension of channel incision and development of canyons and gorges, and accurate estimation of excavation volume and mechanical strength ofpotholed bedrock in the design and stability analysis of hydraulic and environmental engineering projects （e.g. dam construction and river dredging）.展开更多
The material and elastic properties of rocks are utilized for predicting and evaluating hard rock brittleness using artificial neural networks（ANN）. Herein hard rock brittleness is defined using Yagiz＇method. A pre...The material and elastic properties of rocks are utilized for predicting and evaluating hard rock brittleness using artificial neural networks（ANN）. Herein hard rock brittleness is defined using Yagiz＇method. A predictive model is developed using a comprehensive database compiled from 30 years＇ worth of rock tests at the Earth Mechanics Institute（EMI）, Colorado School of Mines. The model is sensitive to density, elastic properties, and P- and S-wave velocities. The results show that the model is a better predictor of rock brittleness than conventional destructive strength-test based models and multiple regression techniques. While the findings have direct implications on intact rock, the methodology can be extrapolated to rock mass problems in both tunneling and underground mining where rock brittleness is an important control.展开更多
基金provided by the Special Funds for the Major State Basic Research Project(No.2006CB202200)the Innovative Team Development Project of the state Educational Ministry of China(No.IRT0656)
文摘This paper presents an overview of experimental investigations conducted at China University of Mining and Technology Beijing(CUMTB) on roadway excavation using large-scale geomechanical model tests.The simulated sedimentary rocks are composed by alternating layers of sandstone, mudstone and coal seam inclined at varied angles with respect to the horizontal including 0°, 45°, 60°, and 90°. During the excavation, infrared thermography was employed to detect the thermal response of the surrounding rocks under excavation. The obtained raw thermograms were processed using denoising algorithm, data reduction procedure and Fourier analysis. The infrared temperature(IRT) characterizes the overall rock response; the processed thermal images represent the structural behavior, and the Fourier spectrum describes damage development in the frequency domain. Deeper understanding was achieved by the comparative analyses of excavation in differently inclined rock masses using the image features of IRTs, thermal images and Fourier spectra.
文摘This paper focuses on the formation mechanism of fractures induced by excavation of a gallery in soft sedimentary rocks in the Horonobe area of Japan. Detailed fracture mapping of the gallery indicates that the fractures consist of both pre-existing shear fractures and excavation damaged zone （EDZ） fractures. EDZ fractures correspond to weak planes associated with bedding planes or transgranular cracks. The EDZ fractures terminate against pre-existing shear fractures. Therefore, even for excavations in soft sedimentary rocks, formation of the EDZ fractures are controlled by pre-existing fractures and earlier weak planes.
文摘Evidence for a mantle and/or basaltic component in KT boundary distal ejecta is apparently inconsistent with ejection from Chicxulub Crater since it is located on;5km thick continental crust（De Paolo et al.,1983;Montanari et al.,1983;Hildebrand and Boynton,1988,1990）.Evidence for mafic/ultramafic target rocks was reinforced by discovery of chromites,some with shock planar deformation features（PDF）,in impact layer samples from sites in southern Colorado and eastern Wyoming（Bohor et al.,1990）.However,until now it was unclear whether the chromites originated with an impactor or with terrestrial target rocks.To this end,high-precision 54Cr/52Cr isotope ratios were measured on KT boundary chromites along with known terrestrial chromites.We find a terrestrial 54Cr/52Cr ratio in KT boundary chromites from impact layer samples collected at the above sites over the last several years（Fig.1）.Ejected terrestrial chromites suggest the impact sampled terrestrial mafic and/or ultramafic target rocks not known to exist in the Chicxulub target area.
基金Project(2013CB036004)supported by the National Basic Research Program of ChinaProject(51378510)supported by the National Natural Science Foundation of China
文摘Rock burst is a kind of geological disaster in rock excavation of high stress areas.To evaluate intensity of rock burst,the maximum shear stress,uniaxial compressive strength,uniaxial tensile strength and rock elastic energy index were selected as input factors,and burst pit depth as output factor.The rock burst prediction model was proposed according to the genetic algorithms and extreme learning machine.The effect of structural surface was taken into consideration.Based on the engineering examples of tunnels,the observed and collected data were divided into the training set,validation set and prediction set.The training set and validation set were used to train and optimize the model.Parameter optimization results are presented.The hidden layer node was450,and the fitness of the predictions was 0.0197 under the optimal combination of the input weight and offset vector.Then,the optimized model is tested with the prediction set.Results show that the proposed model is effective.The maximum relative error is4.71%,and the average relative error is 3.20%,which proves that the model has practical value in the relative engineering.
基金The financial support from the Natural Sciences and Engineering Research Council of Canada(NSERC)and our industrial partners,DeBeers,Metso,and Argex companies as well as PhD scholarship to Mr.Samir Deyab from the department of mining engineering,Tripoli University are gratefully acknowledged.
文摘This study is a part of an overall research project on the effects of microwave(MW)irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University.For the first time,this paper highlights a comprehensive investigation on the effects of microwave irradiation on Canadian kimberlites.Potential contribution to the continuous rock excavation and rock weakening effect prior to implementation of mechanical techniques was explored.Two different kimberlite rocks,i.e.volcaniclastic kimberlite(VK)and hypabyssal kimberlite(HK),and granite samples were studied.Some important physical properties of the rock samples were measured including rock quality designation(RQD),specific gravity,porosity,and specific heat capacity.Rock samples were treated for various exposure times using a multi-mode MWunit at different power levels ranging from 2 kW to 15 kW.The effect of MW irradiation on rock samples was investigated.The results indicate that the mechanical properties including unconfined compressive strength(UCS)and Brazilian tensile strength(BTS)were significantly dropped as a result of MWirradiation.Finally,the effect on rock abrasivity using the Cerchar abrasivity index(CAI)has also been discussed.
基金Supported by the National Key Technology R&D Program of China (2008BAB29B01)
文摘The complicated rock structures and the stability of surrounding rocks of the underground powerhouse were the key rock mechanical problems in Shuibuya hydropower station.In order to overcome the related rock mechanical problems encountered during its construction,a comprehensive research was carried out for the underground powerhouse in Shuibuya hydropower station based on a detailed geological survey.It covers the investigations on the initial in-situ stress distribution features,rock mechanical properties,engineering rock mass classifications by different methods,numerical modeling for stability and support analysis,proper measures for rock excavation and support.The results show that the rock excavations of the underground powerhouse under the given geological conditions can be controlled effectively.Some measures,suggested by the designers,are proved to be rational and effective.These measures mainly consist of:(1) the soft rock replacements by concrete in local area below the crane beam,(2) the shotcrete and reinforcement by rock bolts and anchor cables in surrounding rocks,and (3) 2 m concrete placement on the rock bench between adjacent tailrace tubes.The engineering practice shows that the treated surrounding rocks have a good overall stability.The deformation behaviors observed by safety equipments are within the designing limits.The research conclusions on the related rock mechanical problems,prior to the underground powerhouse excavations,are reliable.
基金supported by the Natural Science and Engineering Research Council (NSERC) of Canada in the form of discovery grant No. 341275the Swiss National Cooperative for the Disposal of Radioactive Waste (NAGRA)
文摘Over the past twenty years, there has been a growing interest in the development of numerical modelsthat can realistically capture the progressive failure of rock masses. In particular, the investigation ofdamage development around underground excavations represents a key issue in several rock engineeringapplications, including tunnelling, mining, drilling, hydroelectric power generation, and the deepgeological disposal of nuclear waste. The goal of this paper is to show the effectiveness of a hybrid finitediscreteelement method （FDEM） code to simulate the fracturing mechanisms associated with theexcavation of underground openings in brittle rock formations. A brief review of the current state-of-theartmodelling approaches is initially provided, including the description of selecting continuum- anddiscontinuum-based techniques. Then, the influence of a number of factors, including mechanical and insitu stress anisotropy, as well as excavation geometry, on the simulated damage is analysed for threedifferent geomechanical scenarios. Firstly, the fracture nucleation and growth process under isotropicrock mass conditions is simulated for a circular shaft. Secondly, the influence of mechanical anisotropy onthe development of an excavation damaged zone （EDZ） around a tunnel excavated in a layered rockformation is considered. Finally, the interaction mechanisms between two large caverns of an undergroundhydroelectric power station are investigated, with particular emphasis on the rock mass responsesensitivity to the pillar width and excavation sequence. Overall, the numerical results indicate that FDEMsimulations can provide unique geomechanical insights in cases where an explicit consideration offracture and fragmentation processes is of paramount importance. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB2600804)Qingdao Guoxin Jiaozhou Bay Second Submarine Tunnel Co.,Ltd.,the National Natural Science Foundation of China(No.52279107)the Key Innovation Team Program of Innovation Talents Promotion Plan by MOST of China(Grant No.2016RA4059).
文摘It is essential to cast light on the construction risks in tunnel excavations through the fault-fracture zone(FFZ).This study adopts the material point method(MPM)to simulate the failure responses of a rock tunnel face during excavation through the FFZ.A numerical study was conducted to compare a physical model test and validate the feasibility of using the MPM in simulating tunnel face failure.One hundred ninety numerical simulation cases were constructed to represent a rock tunnel excavation project with different site con-figurations.The simulation results suggest that the cohesion and the friction angle significantly influence failure responses.The tunnel cover depth can magnify the failure responses,and the FFZ thickness significantly affects the mobilized rock mass volume when the FFZ consists of a weak rock mass.The numerical simulation results suggest three deformation patterns:face bulge,partial failure,and slide collapse.The failure responses can be characterized by stress arch,slip surface,angle of reposing,and influence range.The insights suggested by the face failure responses during excavation through the FFZ can aid field engineers in determining the scope of possible damage,and in establishing emergency measures to minimize losses if such failure occurs.
基金Natural Sciences and Engineering Research Council of Canada for a discovery grant
文摘Geometrical analyses of 3930 potholes （3565 fluvial potholes, 237 marine potholes and 128 hillside potholes） from 33 localities in the world reveal a consistent, linear relationship： D Nh ＋ M, where h and D are, respectively, the depth and mean diameter of pothole, M is a critical size of the initial concavities （seminal potholes） that subsequently underwent growth, and N is the ratio of diameter expanding （wall erosion） speed to deepening （floor abrasion） speed. For the stream potholes, N is generally less than 1 with an average value of 0.67, M varies from 5.3 cm to 40.5 cm with an average of 20 cm, and N decreases gently with increasing M. However, the marine and hillside potholes are generally characterized by N 〉 1 and M 〈 10-14 cm, and a power-law relationship N 4.24M o.78 （coefficient of determination R2 0.75, M is in cm） exists. The results indicate that depth increases faster than diameter for stream potholes due to the larger size of grinding stones （〉5-10 cm）, while depth increases slower than diameter for marine potholes and hillside potholes due to the smaller size of grinding stones （〈5-10 cm）. The pothole h-D relationship is nearly independent of rock type. Knowledge of the pothole depth-diameter relationship is useful in a number of contexts, including simulation of hydraulic dynamics, theoretical considerations of erosion, comprehension of channel incision and development of canyons and gorges, and accurate estimation of excavation volume and mechanical strength ofpotholed bedrock in the design and stability analysis of hydraulic and environmental engineering projects （e.g. dam construction and river dredging）.
文摘The material and elastic properties of rocks are utilized for predicting and evaluating hard rock brittleness using artificial neural networks（ANN）. Herein hard rock brittleness is defined using Yagiz＇method. A predictive model is developed using a comprehensive database compiled from 30 years＇ worth of rock tests at the Earth Mechanics Institute（EMI）, Colorado School of Mines. The model is sensitive to density, elastic properties, and P- and S-wave velocities. The results show that the model is a better predictor of rock brittleness than conventional destructive strength-test based models and multiple regression techniques. While the findings have direct implications on intact rock, the methodology can be extrapolated to rock mass problems in both tunneling and underground mining where rock brittleness is an important control.
