Langasite (LGS) is a novel piezoelectric crystal. The authors numerically analyses the temperature stability of surface acoustic waves (SAW) and the relation of SAW propagation with temperature on certain optimal cuts...Langasite (LGS) is a novel piezoelectric crystal. The authors numerically analyses the temperature stability of surface acoustic waves (SAW) and the relation of SAW propagation with temperature on certain optimal cuts on LGS in this paper. The results show that LGS has better temperature stability than traditional piezo crystals. The results also demonstrate that the velocity of SAW decrease with temperature, the electro-mechanical coupling constant (k2) and temperature coefficient of frequency increases parabolically and the power flow angle increases linearly on certain optimal cuts of LGS. The calculation result compared with the experimental and show good agreement.展开更多
Surface acoustic wave(SAW) devices have been utilized for the sensing of chemical and biological phenomena in microscale for the past few decades. In this study, SAW device was fabricated by electrospinning poly(vinyl...Surface acoustic wave(SAW) devices have been utilized for the sensing of chemical and biological phenomena in microscale for the past few decades. In this study, SAW device was fabricated by electrospinning poly(vinylidenefluoride-co-trifluoroethylene)(P(VDF-TrFE)) incorporated with zinc oxide(ZnO) nanoparticles over the delay line area of the SAW device. The morphology, composition, and crystallinity of P(VDF-TrFE)/ZnO nanocomposites were investigated. After measurement of SAW frequency response, it was found that the insertion loss of the SAW devices incorporated with ZnO nanoparticles was much less than that of the neat polymer-deposited device. The fabricated device was expected to be used in acoustic biosensors to detect and quantify the cell proliferation in cell culture systems.展开更多
A shear-lag theory was developed to investigate the strain transfer from the metal substrate to the surface acoustic wave （SAW） resonator through a bonding layer. A three-layer model of host structure-adhesive layer...A shear-lag theory was developed to investigate the strain transfer from the metal substrate to the surface acoustic wave （SAW） resonator through a bonding layer. A three-layer model of host structure-adhesive layer-resonator layer was established. The strain transfer was theoretically analyzed, and the main factors impacting the SAW sensor measurement were studied. The relationship between the sensor response and the individual effect of all these factors under static loads was discussed. Results showed that better accuracy could be achieved with increase in the adhesive stiffness or resonator length, or decrease in the adhesive thickness. The values of the strain transfer rate calculated from the analytical model agreed well with that from the available experiment data.展开更多
Langatate( LGT) is a novel piezoelectric crystal; its structure is similar to quartz. A numerical analysis of the most important propagation characteristics of surface acoustic waves( SAW) on LGT and quartz is present...Langatate( LGT) is a novel piezoelectric crystal; its structure is similar to quartz. A numerical analysis of the most important propagation characteristics of surface acoustic waves( SAW) on LGT and quartz is presented in this paper. The results show that the phase velocity on LGT is slower than that on quartz.Similar to quartz,there are zero temperature cuts and pure module orientations on LGT. The electro-mechanical coupling constant( k2)of LGT is larger than that of quartz. The characteristics of SAW on LGT with different material constants are calculated and compared.The results show that there are somewhat deviations with different material constants. Especially, the temperature coefficient of frequency( TCF) shows a relatively high difference.展开更多
The surface acoustic wave （SAW） identification （ID）-tags have great potential for application in radio frequency identification （RFID） due to their characteristics of wireless sensing and passive operation. In t...The surface acoustic wave （SAW） identification （ID）-tags have great potential for application in radio frequency identification （RFID） due to their characteristics of wireless sensing and passive operation. In the measurements based on the frequency domain sampling （FDS）, to expand the range of detection and allow the system work in harsh environments, it is necessary to enhance the identification capability at low SNR. In addition, to identify the tags in real time, it is important to reduce identification time. Therefore, estimation of signal parameters based on the Procrustes rotations via the rotational invariance technique （PRO-ESPRIT） is adopted. Experimental results show that good identification capability is achieved with a relatively faster measurement speed.展开更多
文摘Langasite (LGS) is a novel piezoelectric crystal. The authors numerically analyses the temperature stability of surface acoustic waves (SAW) and the relation of SAW propagation with temperature on certain optimal cuts on LGS in this paper. The results show that LGS has better temperature stability than traditional piezo crystals. The results also demonstrate that the velocity of SAW decrease with temperature, the electro-mechanical coupling constant (k2) and temperature coefficient of frequency increases parabolically and the power flow angle increases linearly on certain optimal cuts of LGS. The calculation result compared with the experimental and show good agreement.
基金the Agence Nationale de la Recherche for the financial support (ANR-12-BS09021)the Department of Biotechnology (DBT), Government of India, New Delhi, for the financial support through MSUB IPLSARE Program (BT/PR4800/INF/22/152/2012)
文摘Surface acoustic wave(SAW) devices have been utilized for the sensing of chemical and biological phenomena in microscale for the past few decades. In this study, SAW device was fabricated by electrospinning poly(vinylidenefluoride-co-trifluoroethylene)(P(VDF-TrFE)) incorporated with zinc oxide(ZnO) nanoparticles over the delay line area of the SAW device. The morphology, composition, and crystallinity of P(VDF-TrFE)/ZnO nanocomposites were investigated. After measurement of SAW frequency response, it was found that the insertion loss of the SAW devices incorporated with ZnO nanoparticles was much less than that of the neat polymer-deposited device. The fabricated device was expected to be used in acoustic biosensors to detect and quantify the cell proliferation in cell culture systems.
文摘A shear-lag theory was developed to investigate the strain transfer from the metal substrate to the surface acoustic wave （SAW） resonator through a bonding layer. A three-layer model of host structure-adhesive layer-resonator layer was established. The strain transfer was theoretically analyzed, and the main factors impacting the SAW sensor measurement were studied. The relationship between the sensor response and the individual effect of all these factors under static loads was discussed. Results showed that better accuracy could be achieved with increase in the adhesive stiffness or resonator length, or decrease in the adhesive thickness. The values of the strain transfer rate calculated from the analytical model agreed well with that from the available experiment data.
基金Leading Academic Discipline Project of Shanghai Municipal Education Commission,China(No.J513032)Innovation Program of Shanghai Municipal Education Commission,China(No.09YZ343)
文摘Langatate( LGT) is a novel piezoelectric crystal; its structure is similar to quartz. A numerical analysis of the most important propagation characteristics of surface acoustic waves( SAW) on LGT and quartz is presented in this paper. The results show that the phase velocity on LGT is slower than that on quartz.Similar to quartz,there are zero temperature cuts and pure module orientations on LGT. The electro-mechanical coupling constant( k2)of LGT is larger than that of quartz. The characteristics of SAW on LGT with different material constants are calculated and compared.The results show that there are somewhat deviations with different material constants. Especially, the temperature coefficient of frequency( TCF) shows a relatively high difference.
文摘The surface acoustic wave （SAW） identification （ID）-tags have great potential for application in radio frequency identification （RFID） due to their characteristics of wireless sensing and passive operation. In the measurements based on the frequency domain sampling （FDS）, to expand the range of detection and allow the system work in harsh environments, it is necessary to enhance the identification capability at low SNR. In addition, to identify the tags in real time, it is important to reduce identification time. Therefore, estimation of signal parameters based on the Procrustes rotations via the rotational invariance technique （PRO-ESPRIT） is adopted. Experimental results show that good identification capability is achieved with a relatively faster measurement speed.
