The mechanical properties of modified sea water sea sand coral concrete(SWSSCC)under axial compression were experimentally studied.Two different parameters were considered in this test:types of cement and fiber.An exp...The mechanical properties of modified sea water sea sand coral concrete(SWSSCC)under axial compression were experimentally studied.Two different parameters were considered in this test:types of cement and fiber.An experimental campaign was developed involving uniaxial compression tests and the use of digital image correlation(DIC)method to analyze the strain distribution and crack propagation of specimen.Test results indicated that the compressive strength and elastic modulus of SWSSCC were improved by adding stainless steel fibers(SSF),while polypropylene fibers(PF)enhanced the SWSSCC peak deformation.It was found that the elastic modulus and strength of SWSSCC using ordinary Portland cement(OPC)were higher compared to specimen with low alkalinity sulphoaluminate cement(LAS).Typical strain distribution changed with the variation of fiber types.The propagation and characteristics of cracks in SWSSCC containing PF were similar to those of cracks in SWSSCC.However,the propagation of cracks and the development of plastic deformation in SWSSCC were effectively hindered by adopting SSF.Finally,an analytical stress-strain expression of specimen considering the influences of fibers was established.The obtained results would provide a basis for the application of SWSSCC.展开更多
We present a Scanning Electron Microscopy (SEM) technique for the characterisation of biological and non-biological samples at nano-scale level. Scanning Electron Microscopy has been around for a long while especially...We present a Scanning Electron Microscopy (SEM) technique for the characterisation of biological and non-biological samples at nano-scale level. Scanning Electron Microscopy has been around for a long while especially in material science laboratories in developed countries. The SEM has enabled scientist to have a better understanding of microstructure by providing unsurpassed optical magnifications of samples. In this introductory paper, we introduce the techniques of using SEM to capture highly magnified microstructure of a fly found on an African soybean (Glycine max) seed. We are able to estimate the number of lenses in each eye and zoom into features that could describe its life characteristics. Hexagonal lenses are estimated to have sizes ranging from 14 um to 19 um. This paper also presents a finding of a sea coral “pie like structure” on a single grain of sand used for water filtration.展开更多
Elastic moduli,e.g.shear modulus G and bulk modulus K,are important parameters of geotechnical materials,which are not only the indices for the evaluation of the deformation ability of soils but also the important bas...Elastic moduli,e.g.shear modulus G and bulk modulus K,are important parameters of geotechnical materials,which are not only the indices for the evaluation of the deformation ability of soils but also the important basic parameters for the development of the constitutive models of geotechnical materials.In this study,a series of triaxial loading-unloading-reloading shear tests and isotropic loading-unloadingreloading tests are conducted to study several typical mechanical properties of coral calcareous sand(CCS),and the void ratio evolution during loading,unloading and reloading.The test results show that the stress-strain curves during multiple unloading processes are almost parallel,and their slopes are much greater than the deformation modulus at the initial stage of loading.The relationship between the confining pressure and the volumetric strain can be defined approximately by a hyperbolic equation under the condition of monotonic loading of confining pressure.Under the condition of confining pressure unloading,the evolution of void ratio is linear in the e-lnp0 plane,and these lines are a series of almost parallel lines if there are multiple processes of unloading.Based on the experimental results,it is found that the modified Hardin formulae for the elastic modulus estimation have a significant deviation from the tested values for CCS.Based on the experimental results,it is proposed that the elastic modulus of soils should be determined by the intersection line of two spatial surfaces in the G/K-e-p’/pa space(pa:atmosphere pressure).“Ye formulation”is further proposed for the estimation of the elastic modulus of CCS.This new estimation formulation for soil elastic modulus would provide a new method to accurately describe the mechanical behavior of granular soils.展开更多
Coral sand is widely encountered in coastal areas of tropical and subtropical regions.Compared with silica sand,it usually exhibits weaker performance from the perspective of engineering geology.To improve the geomech...Coral sand is widely encountered in coastal areas of tropical and subtropical regions.Compared with silica sand,it usually exhibits weaker performance from the perspective of engineering geology.To improve the geomechanical performance of coral sand and meet the requirement of foundation construction in coastal areas,a novel alkali activation-based sustainable binder was developed.The alkaliactivated slag(AAS)binder material was composed of ground granulated blast-furnace slag(GGBS)and hydrated lime with the amendment of biochar,an agricultural waste-derived material.The biocharamended AAS stabilized coral sand was subjected to a series of laboratory tests to determine its mechanical,physicochemical,and microstructural characteristics.Results show that adding a moderate amount of biochar in AAS could improve soil strength,elastic modulus,and water holding capacity by up to 20%,70%,and 30%,respectively.Moreover,the addition of biochar in AAS had a marginal effect on the sulfate resistance of the stabilized sand,especially at high biochar content.However,the resistance of the AAS stabilized sand to wet-dry cycles slightly deteriorated with the addition of biochar.Based on these observations,a conceptual model showing biochar-AAS-sand interactions was proposed,in which biochar served as an internal curing agent,micro-reinforcer,and mechanically weak point.展开更多
Coral sand is a unique material developed in the tropical ocean environment, which is mainly composed of coral and other marine organism debris, with the CaCO3 content up to 96 %. It has special physical and mechanica...Coral sand is a unique material developed in the tropical ocean environment, which is mainly composed of coral and other marine organism debris, with the CaCO3 content up to 96 %. It has special physical and mechanical properties due to its composition, structure and sedimentary environment. In this contribution, we discuss its specific gravity, porosity ratio compressibility, crushing, shearing and intensity for coral sand samples from the Nansha islands based on laboratory mechanical tests. Our results show distinct high porosity ratio, high friction angle and low intensity as compared with the quartz sand. We believe that grain crushing is the main factor that influences the deformation and strength of coral sand. Comprehensive study on the physical and mechanical properties of coral sands is significant in providing reliable scientific parameters to construction on coral islet, and thus avoids accidents in construction.展开更多
Particle breakage continuously changes the grading of granular materials and has a significant effect on their mechanical behaviors.Revealing the evolution pattern of particle breakage is valuable for development and ...Particle breakage continuously changes the grading of granular materials and has a significant effect on their mechanical behaviors.Revealing the evolution pattern of particle breakage is valuable for development and validation of constitutive models for crushable materials.A series of parallel triaxial compression tests along the same loading paths but stopped at different axial strains were conducted on two coral sands with different particle sizes under drained and undrained conditions.The tested specimens were carefully sieved to investigate the intermediate accumulation of particle breakage during the loading process.The test results showed that under both drained and undrained conditions,particle breakage increases continuously with increasing axial strain but exhibits different accumulating patterns,and higher confining pressures lead to greater particle breakage.Based on the test results,the correlations between particle breakage and the stress state as well as the input energy were examined.The results demonstrated that either the stress state or input energy alone is inadequate for describing the intermediate process of particle breakage evolution.Then,based on experimental observation,a path-dependent model was proposed for particle breakage evolution,which was formulated in an incremental form and reasonably considers the effects of the past breakage history and current stress state on the breakage rate.The path-dependent model successfully reproduced the development of particle breakage during undrained triaxial compression using the parameters calibrated from the drained tests,preliminarily demonstrating its effectiveness for different stress paths.展开更多
The motion of particle clouds(i.e.,sediment clouds)usually can be found in engineering applications such as wastewater discharge,land reclamation,and marine bed capping.In this paper,a series of laboratory tests are c...The motion of particle clouds(i.e.,sediment clouds)usually can be found in engineering applications such as wastewater discharge,land reclamation,and marine bed capping.In this paper,a series of laboratory tests are conducted on coral sand to investigate the shape feature of the single particle and the mixing processes of the coral sand particle clouds.The shape of coral sand particle is measured and quantified.The experimental results demonstrate that the shape of coral sand particles tends to be spherical as the particle size decreases,and empirical equations were established to explain the variation of D50 and fS,50 of coral sand.Compared with the silica sand,the evolution of the coral sand particle cloud still experiences three stages,but the threshold for the Reynolds number of particle clouds entering the next stage changes.Further,the normalized axial distance of the coral sand particle clouds is 58%smaller.The frontal velocity exhibits similar varying tendency for the coral sand particle cloud.Considering the difference in shape between coral sand particles and silica sand particles,a semi-empirical formula was proposed based on the original silica sand prediction formula by adding the shape factor and the experimental data of 122μm≤D_(50)≤842μm.It can predict the frontal velocity of the coral sand particle clouds.展开更多
The feasibility of using coral reef sand（CRS） in Portland cement concrete is investigated by testing the mechanical property and microstructure of concrete. The composition, structure and properties of the CRS are a...The feasibility of using coral reef sand（CRS） in Portland cement concrete is investigated by testing the mechanical property and microstructure of concrete. The composition, structure and properties of the CRS are analyzed. Mechanical properties and microstructure of concrete with CRS are studied and compared to concrete with natural river sand. The relationship between the microstructure and performance of CRS concrete is established. The CRS has a porous surface with high water intake capacity, which contributes to the mechanical properties of concrete. The interfacial transition zone between the cement paste and CRS is densified compared to normal concrete with river sand. Hydration products form in the pore space of CRS and interlock with the matrix of cement paste, which increases the strength. The total porosity of concrete prepared with CRS is higher than that with natural sand. The main difference in pore size distribution is the fraction of fine pores in the range of 100 nm.展开更多
To reveal the bearing capacity of the X-section pile group in coral sand, a series of model load tests are conducted.The testing results are presented as load-settlement curves, pile-soil stress ratios, distributions ...To reveal the bearing capacity of the X-section pile group in coral sand, a series of model load tests are conducted.The testing results are presented as load-settlement curves, pile-soil stress ratios, distributions of side friction and axial force, and load-sharing ratio between side and tip resistances. The reliability and accuracy of the numerical simulation model are verified by comparing the results of the model test. Comparative analysis between X-section and circular section piles with the same cross-sectional area indicates that the bearing capacity of the X-section pile group is much larger than that of the circular pile group. The axial force of X-section piles is smaller while the peak skin friction is larger than that of circular piles at the same depth. The skin friction of the core pile is the largest,followed by the side pile and the corner pile is the smallest when the load is relatively small;however, it is converse when the load is larger than 10 k N. Compared with piles in silica sand, the pile in coral sand has a lower bearing capacity, and the sand breakage leads to the steep drop failure of pile foundation. Moreover, pile positions under the raft have less effect on the load-share differences among corner, side and core piles in coral sand. This study provides a reference for the construction of pile foundations in coral sand.展开更多
This paper investigates the seismic responses of slopes in coral sand taken from a reef island in the South China Sea.A series of shaking table model tests were conducted to explore the responses of soil acceleration,...This paper investigates the seismic responses of slopes in coral sand taken from a reef island in the South China Sea.A series of shaking table model tests were conducted to explore the responses of soil acceleration,excess pore pressure,and slope displacement for three slope angles(5°,10°,and 15°).The results show that the excess pore pressure ratio of the slope decreases due to an increase in the initial shear stress when the slope angle increases.The acceleration response of the soil increases with the increase of the slope angle.The slope displacement presents substantial increments as the excess pore pressure ratio increases.In addition,the lateral movement,and slope settlement present substantial increments as the slope angle increases.No liquefaction is observed under a dynamic excitation of 0.2 g in the coral sand site.Under a dynamic excitation of 0.4 g,the site liquefies quickly,the acceleration amplification factor decreases,and the lateral movement and the settlement of the slope surface both increase compared with that under 0.2 g excitation.For the slope with an angle of 15°at 0.4 g,the flow distance of the sand strip increase by 289.47%compared with that in the 5°case.The lateral movement of the slope surface near the water level line is substantially larger than that away from the water line.The largest settlement is observed near the middle section of the slope(below the water level)under a dynamic excitation of 0.2 g.In contrast,the largest settlement under a dynamic excitation of 0.4 g occurs at the top of the slope.展开更多
Based on the interface shear tests,the macro-and meso-mechanical behaviors of interaction between coral sand and different structure surfaces are studied,in which CCD camera is used to capture digital images to analyz...Based on the interface shear tests,the macro-and meso-mechanical behaviors of interaction between coral sand and different structure surfaces are studied,in which CCD camera is used to capture digital images to analyze the evolution of the interaction band and a particle analysis apparatus is applied to studying the distribution characteristics of particle morphology.This study proposes four-stage evolution process based on the shear stress−strain curve.During the shear process,coral sand particles slide and rotate within the interaction band,causing the changes in shear stress and vertical displacement.In addition,the effects of structure surface roughness on shear strength,volume change and particle breakage are illustrated that the greater the roughness of slabs is,the larger the shear stress is,the more obvious the contraction effect is and the more the particles break.Furthermore,the change in particle’s 3D morphology during the breakage will change not only their size but also other morphological characteristics with convergence and self-organization.展开更多
The retaining walls in coral sand sites are inevitably threatened by earthquakes. A series of shaking table tests were carried out to study the seismic stability of gravity retaining walls with coral sand backfill. Pa...The retaining walls in coral sand sites are inevitably threatened by earthquakes. A series of shaking table tests were carried out to study the seismic stability of gravity retaining walls with coral sand backfill. Parallel tests with quartz sand were performed to compare and discuss the special dynamic properties of coral sand sites. The results show that the acceleration difference between the retaining wall and the coral sand backfill is 76%-92% that of the quartz sand,which corresponds to the larger liquefaction resistance of coral sand compared with the quartz sand. However, the horizontal displacement of the retaining walls with coral sand backfill reaches 79% of its own width under 0.4g vibration intensity. The risk of instability and damage of the retaining walls with coral sand backfill under strong earthquakes needs attention.展开更多
The low side friction of piles in coral sand results in the low bearing capacity of foundations.In this paper,expansive concrete pile is utilized to improve the bearing capacity of pile foundations in coral sand.Both ...The low side friction of piles in coral sand results in the low bearing capacity of foundations.In this paper,expansive concrete pile is utilized to improve the bearing capacity of pile foundations in coral sand.Both model tests and numerical simulation are performed to reveal the bearing mechanism of expansive concrete pile in coral sand.Results showed that the lateral earth pressure near pile increases obviously and the side friction of piles is improved,after adding expansion agent to the concrete.The horizontal linear expansion is 1.11%and the bearing capacity increased 41%for the pile,when 25%expansion agent is added.Results in finite element numerical simulation also show that ultimate bearing capacity increases with the increase of the linear expansion ratio.Besides,the area for obvious increase in side friction is below the surface of soil about three times the pile diameter,and the expansion leads to a high side friction sharing of the pile.Therefore,the cast-in-place expansive concrete pile is effective in improving the bearing capacity of piles in coral sand.展开更多
基金supported by the National Natural Science Foundation of China(Nos.51408346,51978389)the China Postdoctoral Science Foundation Funded Project(No.2015M572584,No.2016T0914)+3 种基金the Shandong Provincial Natural Science Foundation(No.ZR2019PEE044)the Opening Foundation of Shandong Key Laboratory of Civil Engineering Disaster Prevention and Mitigation(CDPM2019KF12)the Systematic Project of Guangxi Key Laboratory of Disaster Prevention and Structural Safety(2019ZDK035)the Shandong University of Science and Technology(SDKDYC190358).
文摘The mechanical properties of modified sea water sea sand coral concrete(SWSSCC)under axial compression were experimentally studied.Two different parameters were considered in this test:types of cement and fiber.An experimental campaign was developed involving uniaxial compression tests and the use of digital image correlation(DIC)method to analyze the strain distribution and crack propagation of specimen.Test results indicated that the compressive strength and elastic modulus of SWSSCC were improved by adding stainless steel fibers(SSF),while polypropylene fibers(PF)enhanced the SWSSCC peak deformation.It was found that the elastic modulus and strength of SWSSCC using ordinary Portland cement(OPC)were higher compared to specimen with low alkalinity sulphoaluminate cement(LAS).Typical strain distribution changed with the variation of fiber types.The propagation and characteristics of cracks in SWSSCC containing PF were similar to those of cracks in SWSSCC.However,the propagation of cracks and the development of plastic deformation in SWSSCC were effectively hindered by adopting SSF.Finally,an analytical stress-strain expression of specimen considering the influences of fibers was established.The obtained results would provide a basis for the application of SWSSCC.
文摘We present a Scanning Electron Microscopy (SEM) technique for the characterisation of biological and non-biological samples at nano-scale level. Scanning Electron Microscopy has been around for a long while especially in material science laboratories in developed countries. The SEM has enabled scientist to have a better understanding of microstructure by providing unsurpassed optical magnifications of samples. In this introductory paper, we introduce the techniques of using SEM to capture highly magnified microstructure of a fly found on an African soybean (Glycine max) seed. We are able to estimate the number of lenses in each eye and zoom into features that could describe its life characteristics. Hexagonal lenses are estimated to have sizes ranging from 14 um to 19 um. This paper also presents a finding of a sea coral “pie like structure” on a single grain of sand used for water filtration.
基金Professor Jianhong Ye is grateful for the funding support from the National Key Research and Development Program of China(Grant No.2022YFC3102402).
文摘Elastic moduli,e.g.shear modulus G and bulk modulus K,are important parameters of geotechnical materials,which are not only the indices for the evaluation of the deformation ability of soils but also the important basic parameters for the development of the constitutive models of geotechnical materials.In this study,a series of triaxial loading-unloading-reloading shear tests and isotropic loading-unloadingreloading tests are conducted to study several typical mechanical properties of coral calcareous sand(CCS),and the void ratio evolution during loading,unloading and reloading.The test results show that the stress-strain curves during multiple unloading processes are almost parallel,and their slopes are much greater than the deformation modulus at the initial stage of loading.The relationship between the confining pressure and the volumetric strain can be defined approximately by a hyperbolic equation under the condition of monotonic loading of confining pressure.Under the condition of confining pressure unloading,the evolution of void ratio is linear in the e-lnp0 plane,and these lines are a series of almost parallel lines if there are multiple processes of unloading.Based on the experimental results,it is found that the modified Hardin formulae for the elastic modulus estimation have a significant deviation from the tested values for CCS.Based on the experimental results,it is proposed that the elastic modulus of soils should be determined by the intersection line of two spatial surfaces in the G/K-e-p’/pa space(pa:atmosphere pressure).“Ye formulation”is further proposed for the estimation of the elastic modulus of CCS.This new estimation formulation for soil elastic modulus would provide a new method to accurately describe the mechanical behavior of granular soils.
基金supported by the Hawaii Department of Transportation(Grant No.2020-4ReSUPP)National Natural Science Foundation of China(Grant No.42007246)Fundamental Research Funds for the Central Universities.
文摘Coral sand is widely encountered in coastal areas of tropical and subtropical regions.Compared with silica sand,it usually exhibits weaker performance from the perspective of engineering geology.To improve the geomechanical performance of coral sand and meet the requirement of foundation construction in coastal areas,a novel alkali activation-based sustainable binder was developed.The alkaliactivated slag(AAS)binder material was composed of ground granulated blast-furnace slag(GGBS)and hydrated lime with the amendment of biochar,an agricultural waste-derived material.The biocharamended AAS stabilized coral sand was subjected to a series of laboratory tests to determine its mechanical,physicochemical,and microstructural characteristics.Results show that adding a moderate amount of biochar in AAS could improve soil strength,elastic modulus,and water holding capacity by up to 20%,70%,and 30%,respectively.Moreover,the addition of biochar in AAS had a marginal effect on the sulfate resistance of the stabilized sand,especially at high biochar content.However,the resistance of the AAS stabilized sand to wet-dry cycles slightly deteriorated with the addition of biochar.Based on these observations,a conceptual model showing biochar-AAS-sand interactions was proposed,in which biochar served as an internal curing agent,micro-reinforcer,and mechanically weak point.
文摘Coral sand is a unique material developed in the tropical ocean environment, which is mainly composed of coral and other marine organism debris, with the CaCO3 content up to 96 %. It has special physical and mechanical properties due to its composition, structure and sedimentary environment. In this contribution, we discuss its specific gravity, porosity ratio compressibility, crushing, shearing and intensity for coral sand samples from the Nansha islands based on laboratory mechanical tests. Our results show distinct high porosity ratio, high friction angle and low intensity as compared with the quartz sand. We believe that grain crushing is the main factor that influences the deformation and strength of coral sand. Comprehensive study on the physical and mechanical properties of coral sands is significant in providing reliable scientific parameters to construction on coral islet, and thus avoids accidents in construction.
基金This research was supported by the National Natural Science Foundation of China(Grant Nos.51679016 and 52079012).
文摘Particle breakage continuously changes the grading of granular materials and has a significant effect on their mechanical behaviors.Revealing the evolution pattern of particle breakage is valuable for development and validation of constitutive models for crushable materials.A series of parallel triaxial compression tests along the same loading paths but stopped at different axial strains were conducted on two coral sands with different particle sizes under drained and undrained conditions.The tested specimens were carefully sieved to investigate the intermediate accumulation of particle breakage during the loading process.The test results showed that under both drained and undrained conditions,particle breakage increases continuously with increasing axial strain but exhibits different accumulating patterns,and higher confining pressures lead to greater particle breakage.Based on the test results,the correlations between particle breakage and the stress state as well as the input energy were examined.The results demonstrated that either the stress state or input energy alone is inadequate for describing the intermediate process of particle breakage evolution.Then,based on experimental observation,a path-dependent model was proposed for particle breakage evolution,which was formulated in an incremental form and reasonably considers the effects of the past breakage history and current stress state on the breakage rate.The path-dependent model successfully reproduced the development of particle breakage during undrained triaxial compression using the parameters calibrated from the drained tests,preliminarily demonstrating its effectiveness for different stress paths.
基金financially supported by the National Natural Science Foundation of China(Grant No.51839002,51979014 and 52271257)the Natural Science Foundation of Hunan Province(Grant No.2022JJ10047)the Scientific Research Innovation Project of Hunan Graduate(Grant No.CX20200858).
文摘The motion of particle clouds(i.e.,sediment clouds)usually can be found in engineering applications such as wastewater discharge,land reclamation,and marine bed capping.In this paper,a series of laboratory tests are conducted on coral sand to investigate the shape feature of the single particle and the mixing processes of the coral sand particle clouds.The shape of coral sand particle is measured and quantified.The experimental results demonstrate that the shape of coral sand particles tends to be spherical as the particle size decreases,and empirical equations were established to explain the variation of D50 and fS,50 of coral sand.Compared with the silica sand,the evolution of the coral sand particle cloud still experiences three stages,but the threshold for the Reynolds number of particle clouds entering the next stage changes.Further,the normalized axial distance of the coral sand particle clouds is 58%smaller.The frontal velocity exhibits similar varying tendency for the coral sand particle cloud.Considering the difference in shape between coral sand particles and silica sand particles,a semi-empirical formula was proposed based on the original silica sand prediction formula by adding the shape factor and the experimental data of 122μm≤D_(50)≤842μm.It can predict the frontal velocity of the coral sand particle clouds.
基金Funded by the Fundamental Research Funds for the Central Universities(WUT:142201001)
文摘The feasibility of using coral reef sand（CRS） in Portland cement concrete is investigated by testing the mechanical property and microstructure of concrete. The composition, structure and properties of the CRS are analyzed. Mechanical properties and microstructure of concrete with CRS are studied and compared to concrete with natural river sand. The relationship between the microstructure and performance of CRS concrete is established. The CRS has a porous surface with high water intake capacity, which contributes to the mechanical properties of concrete. The interfacial transition zone between the cement paste and CRS is densified compared to normal concrete with river sand. Hydration products form in the pore space of CRS and interlock with the matrix of cement paste, which increases the strength. The total porosity of concrete prepared with CRS is higher than that with natural sand. The main difference in pore size distribution is the fraction of fine pores in the range of 100 nm.
基金financially supported by the National Key Research and Development Program of China (Grant No. 2016YFE0200100)the National Natural Science Foundation of China (Grant Nos. 51878103 and 41831282)。
文摘To reveal the bearing capacity of the X-section pile group in coral sand, a series of model load tests are conducted.The testing results are presented as load-settlement curves, pile-soil stress ratios, distributions of side friction and axial force, and load-sharing ratio between side and tip resistances. The reliability and accuracy of the numerical simulation model are verified by comparing the results of the model test. Comparative analysis between X-section and circular section piles with the same cross-sectional area indicates that the bearing capacity of the X-section pile group is much larger than that of the circular pile group. The axial force of X-section piles is smaller while the peak skin friction is larger than that of circular piles at the same depth. The skin friction of the core pile is the largest,followed by the side pile and the corner pile is the smallest when the load is relatively small;however, it is converse when the load is larger than 10 k N. Compared with piles in silica sand, the pile in coral sand has a lower bearing capacity, and the sand breakage leads to the steep drop failure of pile foundation. Moreover, pile positions under the raft have less effect on the load-share differences among corner, side and core piles in coral sand. This study provides a reference for the construction of pile foundations in coral sand.
基金supported by the National Natural Science Foundation of China(Grant Nos.41831282,51878103)the Fundamental Research Funds for the Central Universities(Grant No.2021CDJQY-042)the Postdoctoral innovative talents support program,Chongqing。
文摘This paper investigates the seismic responses of slopes in coral sand taken from a reef island in the South China Sea.A series of shaking table model tests were conducted to explore the responses of soil acceleration,excess pore pressure,and slope displacement for three slope angles(5°,10°,and 15°).The results show that the excess pore pressure ratio of the slope decreases due to an increase in the initial shear stress when the slope angle increases.The acceleration response of the soil increases with the increase of the slope angle.The slope displacement presents substantial increments as the excess pore pressure ratio increases.In addition,the lateral movement,and slope settlement present substantial increments as the slope angle increases.No liquefaction is observed under a dynamic excitation of 0.2 g in the coral sand site.Under a dynamic excitation of 0.4 g,the site liquefies quickly,the acceleration amplification factor decreases,and the lateral movement and the settlement of the slope surface both increase compared with that under 0.2 g excitation.For the slope with an angle of 15°at 0.4 g,the flow distance of the sand strip increase by 289.47%compared with that in the 5°case.The lateral movement of the slope surface near the water level line is substantially larger than that away from the water line.The largest settlement is observed near the middle section of the slope(below the water level)under a dynamic excitation of 0.2 g.In contrast,the largest settlement under a dynamic excitation of 0.4 g occurs at the top of the slope.
基金Project(2017YFC0805406)supported by the National Key Research and Development Program of ChinaProjects(51879142,51679123)supported by the National Natural Science Foundation of ChinaProject(2020-KY-04)supported by the Research Fund Program of the State Key Laboratory of Hydroscience and Engineering,China。
文摘Based on the interface shear tests,the macro-and meso-mechanical behaviors of interaction between coral sand and different structure surfaces are studied,in which CCD camera is used to capture digital images to analyze the evolution of the interaction band and a particle analysis apparatus is applied to studying the distribution characteristics of particle morphology.This study proposes four-stage evolution process based on the shear stress−strain curve.During the shear process,coral sand particles slide and rotate within the interaction band,causing the changes in shear stress and vertical displacement.In addition,the effects of structure surface roughness on shear strength,volume change and particle breakage are illustrated that the greater the roughness of slabs is,the larger the shear stress is,the more obvious the contraction effect is and the more the particles break.Furthermore,the change in particle’s 3D morphology during the breakage will change not only their size but also other morphological characteristics with convergence and self-organization.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.41831282 and 51878103)the Fundamental Research Funds for the Central Universities(Grant No.2021CDJQY-042)Chongqing Talents Program(Grant No.cstc2021ycjh-bgzxm0051).
文摘The retaining walls in coral sand sites are inevitably threatened by earthquakes. A series of shaking table tests were carried out to study the seismic stability of gravity retaining walls with coral sand backfill. Parallel tests with quartz sand were performed to compare and discuss the special dynamic properties of coral sand sites. The results show that the acceleration difference between the retaining wall and the coral sand backfill is 76%-92% that of the quartz sand,which corresponds to the larger liquefaction resistance of coral sand compared with the quartz sand. However, the horizontal displacement of the retaining walls with coral sand backfill reaches 79% of its own width under 0.4g vibration intensity. The risk of instability and damage of the retaining walls with coral sand backfill under strong earthquakes needs attention.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51878103 and 41831282)the Innovation Group Science Foundation of the Natural Science Foundation of Chongqing,China(Grant No.cstc2020jcyj-cxtt X0003)。
文摘The low side friction of piles in coral sand results in the low bearing capacity of foundations.In this paper,expansive concrete pile is utilized to improve the bearing capacity of pile foundations in coral sand.Both model tests and numerical simulation are performed to reveal the bearing mechanism of expansive concrete pile in coral sand.Results showed that the lateral earth pressure near pile increases obviously and the side friction of piles is improved,after adding expansion agent to the concrete.The horizontal linear expansion is 1.11%and the bearing capacity increased 41%for the pile,when 25%expansion agent is added.Results in finite element numerical simulation also show that ultimate bearing capacity increases with the increase of the linear expansion ratio.Besides,the area for obvious increase in side friction is below the surface of soil about three times the pile diameter,and the expansion leads to a high side friction sharing of the pile.Therefore,the cast-in-place expansive concrete pile is effective in improving the bearing capacity of piles in coral sand.
