The objective of present work is to study the thermo diffusion effect on an unsteady simultaneous convective heat and mass transfer flow of an incompressible, electrically conducting, heat generating/absorbing fluid a...The objective of present work is to study the thermo diffusion effect on an unsteady simultaneous convective heat and mass transfer flow of an incompressible, electrically conducting, heat generating/absorbing fluid along a semi-infinite moving porous plate embedded in a porous medium with the presence of pressure gradient, thermal radiation field and chemical reaction. It is assumed that the permeable plate is embedded in a uniform porous medium and moves with a constant velocity in the flow direction in the presence of a transverse magnetic field. It is also assumed that the free stream consists of a mean velocity, temperature and concentration over which are super imposed an exponentially varying with time. The equations of continuity, momentum, energy and diffusion, which govern the flow field, are solved by using a regular perturbation method. The behavior of the velocity, temperature, concentration, Skin-friction, rate of heat transfer and rate of mass transfer has been discussed for variations in the physical parameters. An increase in both Pr and R results a decrease in thermal boundary layer thickness. However, concentration decreases as Kr, Sc increase but it increases with an increase in both So and δ.展开更多
This paper studies quantum diffusion in semi-infinite one-dimensional periodic lattice and quasiperiodic Fibonacci lattice. It finds that the quantum diffusion in the semi-infinite periodic lattice shows the same prop...This paper studies quantum diffusion in semi-infinite one-dimensional periodic lattice and quasiperiodic Fibonacci lattice. It finds that the quantum diffusion in the semi-infinite periodic lattice shows the same properties as that for the infinite periodic lattice. Different behaviour is found for the semi-infinite Fibonacci lattice. In this case, there are still C（t） - t^-δ and d（t） - t^β. However, it finds that 0 〈δ 〈 1 for smaller time, and δ = 0 for larger time due to the influence of surface localized states. Moreover, β for the semi-infinite Fibonacci lattice is much smaller than that for the infinite Fibonacci lattice. Effects of disorder on the quantum diffusion are also discussed.展开更多
1 INTRODUCTIONSince experimental determination of the mutual liquid diffusion coefficients atinfinite dilution is rather complicated,it is important,therefore,to be able to esti-mate the coefficients under various tem...1 INTRODUCTIONSince experimental determination of the mutual liquid diffusion coefficients atinfinite dilution is rather complicated,it is important,therefore,to be able to esti-mate the coefficients under various temperatures from one available coefficient ata certain temperature such as 298K.Empirical equations for this purpose are avail-able in many forms.Typical examples are the Wilke-Chang equation and the Tynequation,given展开更多
In this paper, we consider an impulsive competitive system with infinite delay and diffusion. Firstly, on basis of inequality estimation techniques and comparison theorem of impulsive differential equations, we obtain...In this paper, we consider an impulsive competitive system with infinite delay and diffusion. Firstly, on basis of inequality estimation techniques and comparison theorem of impulsive differential equations, we obtain some sufficient conditions for the permanence and extinction of the system. Then, we establish sufficient conditions for the globally attractive of the system by constructing appropriate Lyapunov function. Besides, under different impulsive conditions, we discuss the effect of time delay and diffusion on dynamic behavior of the competitive system.展开更多
This study is devoted to the analysis of a one-dimensional time-dependent double-diffusive flow over a semi-infinite vertical plate, under a convective surface boundary condition. Using similarity variable, the govern...This study is devoted to the analysis of a one-dimensional time-dependent double-diffusive flow over a semi-infinite vertical plate, under a convective surface boundary condition. Using similarity variable, the governing nonlinear partial differential equations have been transformed into a set of coupled nonlinear ordinary differential equations, which are solved numerically by using shooting method alongside with Runge-Kutta integration scheme as embedded in Maple software programme. The numerical results of the skin-friction coefficient, the Nusselt and Sherwood numbers are discussed and depicted graphically.展开更多
A class of functions called quasi B s invex and pseudo B s invex functions are introduced by using the concept of symmetric gradient. The examples of quasi B s invex and pseudo B s invex functions are given. The suffi...A class of functions called quasi B s invex and pseudo B s invex functions are introduced by using the concept of symmetric gradient. The examples of quasi B s invex and pseudo B s invex functions are given. The sufficient optimality conditions and Mond Weir type duality results are obtained for a nondifferentiable nonlinear semi infinite programming problem involving quasi B s invex and pseudo B s invex functions.展开更多
Based on the fundamental equations of magnetoelectroelastic material and the analytic theory, and using the Muskhelishvili-introduced well-known elastic techniques combined with the superposition principle, the closed...Based on the fundamental equations of magnetoelectroelastic material and the analytic theory, and using the Muskhelishvili-introduced well-known elastic techniques combined with the superposition principle, the closed form solution of the generalized stress field of the interaction between many parallel screw dislocations and a semi-infinite crack in an infinite magnetoelectroelastic solid is obtained, on the assumption that the surface of the crack is impermeable electrically and magnetically. Besides, the Peach-Koehler formula of n parallel screw dislocations is given. Numerical examples show that the generalized stress varies with the position of point z and is related to the material constants. The results indicate that the stress concentration occurs at the dislocation core and the tip of the crack. The result of interaction makes the system stay in a lower energy state.展开更多
By means of analytic function theory, the problems of interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are studied. The analytic solutions o...By means of analytic function theory, the problems of interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are studied. The analytic solutions of stress fields of the interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are obtained. They indicate that the stress concentration occurs at the dislocation source and the tip of the crack, and the value of the stress increases with the number of the dislocations increasing. These results are the development of interaction among the finitely many defects of quasicrystals, which possesses an important reference value for studying the interaction problems of infinitely many defects in fracture mechanics of quasicrystal.展开更多
The aim of this article is to discuss an asymptotic approximation model and its convergence for the minimax semi-infinite programming problem. An asymptotic surrogate constraints method for the minimax semi-infinite p...The aim of this article is to discuss an asymptotic approximation model and its convergence for the minimax semi-infinite programming problem. An asymptotic surrogate constraints method for the minimax semi-infinite programming problem is presented by making use of two general discrete approximation methods. Simultaneously, the consistence and the epi-convergence of the asymptotic approximation problem are discussed.展开更多
Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-pla...Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.展开更多
A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S...A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.展开更多
The problem of a semi-infinite medium subjected to thermal shock on its plane boundary is solved in the context of the dual-phase-lag thermoelastic model. The expressions for temperature, displacement and stress are p...The problem of a semi-infinite medium subjected to thermal shock on its plane boundary is solved in the context of the dual-phase-lag thermoelastic model. The expressions for temperature, displacement and stress are presented. The governing equations are expressed in Laplace transform domain and solved in that domain. The solution of the problem in the physical domain is obtained by using a numerical method for the inversion of the Laplace transforms based on Fourier series expansions. The numerical estimates of the displacement, temperature, stress and strain are obtained for a hypothetical material. The results obtained are presented graphically to show the effect phase-lag of the heat flux and a phase-lag of temperature gradient on displacement, temperature, stress.展开更多
Using the complex variable function method and the conformal mapping technique, the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the ...Using the complex variable function method and the conformal mapping technique, the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface. Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable. The results can be reduced to the well-known solutions for a purely elastic material in the absence of an electric load. Moreover, when the distance between the two crack tips tends to infinity, analytic solutions of a semi-infinite crack in a piezoelectric strip can be obtained. Numerical examples are given to show the influence of the loaded crack length, the height of the strip, the distance between the two crack tips, and the applied mechanical/electric loads on the mechanical strain energy release rate. It is shown that the material is easier to fail when the distance between two crack tips becomes shorter, and the mechanical/electric loads have greater influence on the propagation of the left crack than those of the right one.展开更多
By using Cauchy's integral formula of analytical complex function and the third order complex spline function, a general boundary solution method for solving the complex potential field of the flow field around a...By using Cauchy's integral formula of analytical complex function and the third order complex spline function, a general boundary solution method for solving the complex potential field of the flow field around a 2D semi infinite body is presented in this paper. The pressure coefficients obtained by the present method agree well with those given by Acrivous, showing the validity of our method.展开更多
In this paper, necessary optimality conditions for a class of Semi-infinite Variational Problems are established which are further generalized to a class of Multi-objective Semi-Infinite Variational Problems. These co...In this paper, necessary optimality conditions for a class of Semi-infinite Variational Problems are established which are further generalized to a class of Multi-objective Semi-Infinite Variational Problems. These conditions are responsible for the development of duality theory which is an extremely important feature for any class of problems, but the literature available so far lacks these necessary optimality conditions for the stated problem. A lemma is also proved to find the topological dual of as it is required to prove the desired result.展开更多
In the present paper a finite layer method is studied for the flastodynarnics of transverse isotropic bodies. With this method, semi-infinite soils can be considered as an transverse isotropic half-space, its material...In the present paper a finite layer method is studied for the flastodynarnics of transverse isotropic bodies. With this method, semi-infinite soils can be considered as an transverse isotropic half-space, its material functions varying with depth. Dividing the half-space into a scries of layers in the direction of depth, the material junctions in each layer are simulated by exponential functions Consequently, the fundamental equations to be solved can be simplified if the Fourier transform with repsect to coordinates is used. We have obtained the relationship between the 'layer forces' and 'layer displacements'. This finite layer method, in fact, can also be called a semi-analytical method. It possesses those advantages as the usual semi-analytical methods do, and can be used to analyse the problem of the interaction between soils and structures.展开更多
In the present paper reductions of the finite layer mathod once studied in detail by the authors for the elastodvnamics of transverse isotropic bodies are given to several special cases. Two-dimensional problems, axis...In the present paper reductions of the finite layer mathod once studied in detail by the authors for the elastodvnamics of transverse isotropic bodies are given to several special cases. Two-dimensional problems, axisymmetric problems and static problems are discussed, respectively, and this finite layer method is also generalized to the problems in which materials possess viscous properties. Two numerical examples have been presented for the axisymmetric case. From these two examples it can be concluded that the finite layer method can be used to analyse semi-infinite layered soils and to deal with the problem of the interaction between soils and structures.展开更多
Green’s function for the T-stress near a crack tip is addressed with an analytic function method for a semi-infinite crack lying in an elastical, isotropic, and infinite plate. The cracked plate is loaded by a single...Green’s function for the T-stress near a crack tip is addressed with an analytic function method for a semi-infinite crack lying in an elastical, isotropic, and infinite plate. The cracked plate is loaded by a single inclined concentrated force at an interior point. The complex potentials are obtained based on a superposition principle, which provide the solutions to the plane problems of elasticity. The regular parts of the potentials are extracted in an asymptotic analysis. Based on the regular parts, Green’s function for the T-stress is obtained in a straightforward manner. Furthermore, Green’s functions are derived for a pair of symmetrically and anti-symmetrically concentrated forces by the superimposing method. Then, Green’s function is used to predict the domain-switch-induced T-stress in a ferroelectric double cantilever beam （DCB） test. The T-stress induced by the electromechanical loading is used to judge the stable and unstable crack growth behaviors observed in the test. The prediction results generally agree with the experimental data.展开更多
Heat conduction dynamics are described by partial differential equations. Their approximations with a set of finite number of ordinary differential equations are often required for simpler computations and analyses. R...Heat conduction dynamics are described by partial differential equations. Their approximations with a set of finite number of ordinary differential equations are often required for simpler computations and analyses. Rational approximations of the Laplace solutions such as the Pade approximation can be used for this purpose. For some heat conduction problems appearing in a semi-infinite slab, however, such rational approximations are not easy to obtain because the Laplace solutions are not analytic at the origin. In this article, a continued fraction method has been proposed to obtain rational approximations of such heat conduction dynamics in a semi-infinite slab.展开更多
In the current work, transient heat conduction in a semi-infinite medium is considered for its many applications in various heat fields. Here, the homotopy analysis method （HAM） is applied to solve this problem and ...In the current work, transient heat conduction in a semi-infinite medium is considered for its many applications in various heat fields. Here, the homotopy analysis method （HAM） is applied to solve this problem and analytical results are compared with those of the exact and integral methods results. The results show that the HAM can give much better approximations than the other approximate methods： Changes in heat fluxes and profiles of temperature are obtained at different times and positions for copper, iron and aluminum.展开更多
文摘The objective of present work is to study the thermo diffusion effect on an unsteady simultaneous convective heat and mass transfer flow of an incompressible, electrically conducting, heat generating/absorbing fluid along a semi-infinite moving porous plate embedded in a porous medium with the presence of pressure gradient, thermal radiation field and chemical reaction. It is assumed that the permeable plate is embedded in a uniform porous medium and moves with a constant velocity in the flow direction in the presence of a transverse magnetic field. It is also assumed that the free stream consists of a mean velocity, temperature and concentration over which are super imposed an exponentially varying with time. The equations of continuity, momentum, energy and diffusion, which govern the flow field, are solved by using a regular perturbation method. The behavior of the velocity, temperature, concentration, Skin-friction, rate of heat transfer and rate of mass transfer has been discussed for variations in the physical parameters. An increase in both Pr and R results a decrease in thermal boundary layer thickness. However, concentration decreases as Kr, Sc increase but it increases with an increase in both So and δ.
基金Project supported by the National Natural Science Foundation of China(Grant No19674046)the Cheung Kong Scholars Programme of Chinathe Construct Program of the Key Discipline in Hunan Province,China
文摘This paper studies quantum diffusion in semi-infinite one-dimensional periodic lattice and quasiperiodic Fibonacci lattice. It finds that the quantum diffusion in the semi-infinite periodic lattice shows the same properties as that for the infinite periodic lattice. Different behaviour is found for the semi-infinite Fibonacci lattice. In this case, there are still C（t） - t^-δ and d（t） - t^β. However, it finds that 0 〈δ 〈 1 for smaller time, and δ = 0 for larger time due to the influence of surface localized states. Moreover, β for the semi-infinite Fibonacci lattice is much smaller than that for the infinite Fibonacci lattice. Effects of disorder on the quantum diffusion are also discussed.
文摘1 INTRODUCTIONSince experimental determination of the mutual liquid diffusion coefficients atinfinite dilution is rather complicated,it is important,therefore,to be able to esti-mate the coefficients under various temperatures from one available coefficient ata certain temperature such as 298K.Empirical equations for this purpose are avail-able in many forms.Typical examples are the Wilke-Chang equation and the Tynequation,given
文摘In this paper, we consider an impulsive competitive system with infinite delay and diffusion. Firstly, on basis of inequality estimation techniques and comparison theorem of impulsive differential equations, we obtain some sufficient conditions for the permanence and extinction of the system. Then, we establish sufficient conditions for the globally attractive of the system by constructing appropriate Lyapunov function. Besides, under different impulsive conditions, we discuss the effect of time delay and diffusion on dynamic behavior of the competitive system.
文摘This study is devoted to the analysis of a one-dimensional time-dependent double-diffusive flow over a semi-infinite vertical plate, under a convective surface boundary condition. Using similarity variable, the governing nonlinear partial differential equations have been transformed into a set of coupled nonlinear ordinary differential equations, which are solved numerically by using shooting method alongside with Runge-Kutta integration scheme as embedded in Maple software programme. The numerical results of the skin-friction coefficient, the Nusselt and Sherwood numbers are discussed and depicted graphically.
基金the Natural Science Foundation of Shaanxi Province and the Science Foundation of Shaanxi Provincial Educational CommitteeP.R.China
文摘A class of functions called quasi B s invex and pseudo B s invex functions are introduced by using the concept of symmetric gradient. The examples of quasi B s invex and pseudo B s invex functions are given. The sufficient optimality conditions and Mond Weir type duality results are obtained for a nondifferentiable nonlinear semi infinite programming problem involving quasi B s invex and pseudo B s invex functions.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11262017,11262012,and 11462020)the Natural Science Foundation of Inner Mongolia Autonomous Region,China(Grant No.2015MS0129)+1 种基金the Key Project of Inner Mongolia Normal University,China(Grant No.2014ZD03)the Graduate Research Innovation Project of Inner Mongolia Autonomous Region,China(Grant No.S20171013502)
文摘Based on the fundamental equations of magnetoelectroelastic material and the analytic theory, and using the Muskhelishvili-introduced well-known elastic techniques combined with the superposition principle, the closed form solution of the generalized stress field of the interaction between many parallel screw dislocations and a semi-infinite crack in an infinite magnetoelectroelastic solid is obtained, on the assumption that the surface of the crack is impermeable electrically and magnetically. Besides, the Peach-Koehler formula of n parallel screw dislocations is given. Numerical examples show that the generalized stress varies with the position of point z and is related to the material constants. The results indicate that the stress concentration occurs at the dislocation core and the tip of the crack. The result of interaction makes the system stay in a lower energy state.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11462020,11262017,and 11262012)the Key Project of Inner Mongolia Normal University,China(Grant No.2014ZD03)
文摘By means of analytic function theory, the problems of interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are studied. The analytic solutions of stress fields of the interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are obtained. They indicate that the stress concentration occurs at the dislocation source and the tip of the crack, and the value of the stress increases with the number of the dislocations increasing. These results are the development of interaction among the finitely many defects of quasicrystals, which possesses an important reference value for studying the interaction problems of infinitely many defects in fracture mechanics of quasicrystal.
基金Supported by the National Key Basic Research Special Fund(2003CB415200)the National Science Foundation(70371032 and 60274048)the Doctoral Foundation of the Ministry of Education(20020486035)
文摘The aim of this article is to discuss an asymptotic approximation model and its convergence for the minimax semi-infinite programming problem. An asymptotic surrogate constraints method for the minimax semi-infinite programming problem is presented by making use of two general discrete approximation methods. Simultaneously, the consistence and the epi-convergence of the asymptotic approximation problem are discussed.
基金Project supported by the National Natural Science Foundation of China(Nos.10932001 and 11072015)the Scientific Research Key Program of Beijing Municipal Commission of Education (No.KZ201010005003)the Ph.D.Innovation Foundation of Beijing University of Aeronautics and Astronautics(No.300351)
文摘Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.
基金supported by the National Natural Science Foundation of China (10872195)
文摘A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.
文摘The problem of a semi-infinite medium subjected to thermal shock on its plane boundary is solved in the context of the dual-phase-lag thermoelastic model. The expressions for temperature, displacement and stress are presented. The governing equations are expressed in Laplace transform domain and solved in that domain. The solution of the problem in the physical domain is obtained by using a numerical method for the inversion of the Laplace transforms based on Fourier series expansions. The numerical estimates of the displacement, temperature, stress and strain are obtained for a hypothetical material. The results obtained are presented graphically to show the effect phase-lag of the heat flux and a phase-lag of temperature gradient on displacement, temperature, stress.
基金Project supported by the National Natural Science Foundation of China(Nos.10932001 and 11072015)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20101102110016)
文摘Using the complex variable function method and the conformal mapping technique, the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface. Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable. The results can be reduced to the well-known solutions for a purely elastic material in the absence of an electric load. Moreover, when the distance between the two crack tips tends to infinity, analytic solutions of a semi-infinite crack in a piezoelectric strip can be obtained. Numerical examples are given to show the influence of the loaded crack length, the height of the strip, the distance between the two crack tips, and the applied mechanical/electric loads on the mechanical strain energy release rate. It is shown that the material is easier to fail when the distance between two crack tips becomes shorter, and the mechanical/electric loads have greater influence on the propagation of the left crack than those of the right one.
文摘By using Cauchy's integral formula of analytical complex function and the third order complex spline function, a general boundary solution method for solving the complex potential field of the flow field around a 2D semi infinite body is presented in this paper. The pressure coefficients obtained by the present method agree well with those given by Acrivous, showing the validity of our method.
文摘In this paper, necessary optimality conditions for a class of Semi-infinite Variational Problems are established which are further generalized to a class of Multi-objective Semi-Infinite Variational Problems. These conditions are responsible for the development of duality theory which is an extremely important feature for any class of problems, but the literature available so far lacks these necessary optimality conditions for the stated problem. A lemma is also proved to find the topological dual of as it is required to prove the desired result.
文摘In the present paper a finite layer method is studied for the flastodynarnics of transverse isotropic bodies. With this method, semi-infinite soils can be considered as an transverse isotropic half-space, its material functions varying with depth. Dividing the half-space into a scries of layers in the direction of depth, the material junctions in each layer are simulated by exponential functions Consequently, the fundamental equations to be solved can be simplified if the Fourier transform with repsect to coordinates is used. We have obtained the relationship between the 'layer forces' and 'layer displacements'. This finite layer method, in fact, can also be called a semi-analytical method. It possesses those advantages as the usual semi-analytical methods do, and can be used to analyse the problem of the interaction between soils and structures.
文摘In the present paper reductions of the finite layer mathod once studied in detail by the authors for the elastodvnamics of transverse isotropic bodies are given to several special cases. Two-dimensional problems, axisymmetric problems and static problems are discussed, respectively, and this finite layer method is also generalized to the problems in which materials possess viscous properties. Two numerical examples have been presented for the axisymmetric case. From these two examples it can be concluded that the finite layer method can be used to analyse semi-infinite layered soils and to deal with the problem of the interaction between soils and structures.
基金Project supported by the National Natural Science Foundation of China(Nos.10702071 and 11090334)the China Postdoctoral Science Foundation(No.201003281)+2 种基金the Shanghai Postdoctoral Scientific Program(No.10R21415800)the Shanghai Leading Academic Discipline Project(No.B302)sponsored by the"Sino-German Center for Research Promotion"under a project of"Crack Growth in Ferroelectrics Driven by Cyclic Electric Loading"
文摘Green’s function for the T-stress near a crack tip is addressed with an analytic function method for a semi-infinite crack lying in an elastical, isotropic, and infinite plate. The cracked plate is loaded by a single inclined concentrated force at an interior point. The complex potentials are obtained based on a superposition principle, which provide the solutions to the plane problems of elasticity. The regular parts of the potentials are extracted in an asymptotic analysis. Based on the regular parts, Green’s function for the T-stress is obtained in a straightforward manner. Furthermore, Green’s functions are derived for a pair of symmetrically and anti-symmetrically concentrated forces by the superimposing method. Then, Green’s function is used to predict the domain-switch-induced T-stress in a ferroelectric double cantilever beam （DCB） test. The T-stress induced by the electromechanical loading is used to judge the stable and unstable crack growth behaviors observed in the test. The prediction results generally agree with the experimental data.
文摘Heat conduction dynamics are described by partial differential equations. Their approximations with a set of finite number of ordinary differential equations are often required for simpler computations and analyses. Rational approximations of the Laplace solutions such as the Pade approximation can be used for this purpose. For some heat conduction problems appearing in a semi-infinite slab, however, such rational approximations are not easy to obtain because the Laplace solutions are not analytic at the origin. In this article, a continued fraction method has been proposed to obtain rational approximations of such heat conduction dynamics in a semi-infinite slab.
文摘In the current work, transient heat conduction in a semi-infinite medium is considered for its many applications in various heat fields. Here, the homotopy analysis method （HAM） is applied to solve this problem and analytical results are compared with those of the exact and integral methods results. The results show that the HAM can give much better approximations than the other approximate methods： Changes in heat fluxes and profiles of temperature are obtained at different times and positions for copper, iron and aluminum.
