High-performance magnesium alloys are moving towards a trend of being produced on a large scale and in an integrated manner.The foundational key to their successful production is the high-quality cast ingots.Magnesium...High-performance magnesium alloys are moving towards a trend of being produced on a large scale and in an integrated manner.The foundational key to their successful production is the high-quality cast ingots.Magnesium alloys produced through the conventional semi-continuous casting process inevitably contain casting defects,which makes it challenging to manufacture high-quality ingots.The integration of external field assisted controlled solidification technology,which combines physical fields such as electromagnetic and ultrasonic fields with traditional semi-continuous casting processes,enables the production of high-quality magnesium alloy ingots characterized by a homogeneous microstructure and absence of cracks.This article mainly summarizes the technical principles of those external field assisted casting process.The focus is on elaborating the refinement mechanism of different types of electromagnetic fields,ultrasonic fields,and combined physical fields during the solidification of magnesium alloys.Finally,the development prospects of producing highquality magnesium alloy ingots through semi-continuous casting under the external field were discussed.展开更多
In this paper, we characterize lower semi-continuous pseudo-convex functions f : X → R ∪ {+ ∞} on convex subset of real Banach spaces K ⊂ X with respect to the pseudo-monotonicity of its Clarke-Rockafellar Su...In this paper, we characterize lower semi-continuous pseudo-convex functions f : X → R ∪ {+ ∞} on convex subset of real Banach spaces K ⊂ X with respect to the pseudo-monotonicity of its Clarke-Rockafellar Sub-differential. We extend the results on the characterizations of non-smooth convex functions f : X → R ∪ {+ ∞} on convex subset of real Banach spaces K ⊂ X with respect to the monotonicity of its sub-differentials to the lower semi-continuous pseudo-convex functions on real Banach spaces.展开更多
Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructur...Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructure and composition distribution of the composite interface were investigated.The results show that semi-solid layer with a certain thickness forms near the interface due to the effect of cooling plate,which ensures successful implementation of casting the composite ingot.Two different aluminum alloys are well bonded metallurgically.The mechanical properties of composite interface were measured,the tensile and shearing strengths of composite interface are 105 and 88 MPa,respectively,which proves that the composite interface is a kind of metallurgical bonding.展开更多
Continuous and semi-continuous mining technology has become the main trend of modern surface mines in the world. According to the deposit characteristics of coal basin in China and Chinese situation,this paper discuss...Continuous and semi-continuous mining technology has become the main trend of modern surface mines in the world. According to the deposit characteristics of coal basin in China and Chinese situation,this paper discussed the new semi-continuous technology── shovel - transfer wagon-belt conveyor and its application prospect in large surface coal mines in China.展开更多
Mg-9Gd-3Y-1.5Zn-0.8Zr alloys own high strength,good heat and corrosion resistance.However,it is difficult for the fabrication of large-scale billets,due to the poor deformation ability and strong hot-crack tendency.Th...Mg-9Gd-3Y-1.5Zn-0.8Zr alloys own high strength,good heat and corrosion resistance.However,it is difficult for the fabrication of large-scale billets,due to the poor deformation ability and strong hot-crack tendency.This work investigated the casting process on the microstructures and flow stress behaviors of the semi-continuous casting billets for the fabrication of large-scale Mg-9Gd-3Y-1.5Zn-0.8Zr billets.The casting process(electromagnetic intensity and casting speed)shows outstanding effects on the microstructures and flow stress behavior of the billets.The billets with the specific casting process(I=68 A,V=65 mm/min)exhibit uniform microstructures and good deformation uniformity.展开更多
Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show...Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show that the microstructures of the alloy cast under high-intensity ultrasonic field are fine and uniform,and the grains are equiaxed,rose-shaped or globular with an average size of 257μm.High-intensity field significantly decreases the grain size,changes the morphologies of theβ-Mg17Al12 phases and reduces their area fraction.It is also shown that a proper increase in ultrasonic intensity is helpful to obtain fine,uniform and equiaxed as-cast microstructures.The optimum ultrasonic parameters are that frequency is 20 kHz and ultrasonic intensity is 1 368 W.The mechanical tests show that the mechanical properties of the as-cast AZ80 magnesium alloy billets cast under ultrasonic field are greatly improved,and with increasing the ultrasonic intensity,the mechanical properties of the entire alloy billets are much higher and more uniform than those of the alloy without ultrasonic field.展开更多
The microstucture, mechanical properties and fracture behaviors of semi-continuous cast Mg-8Gd- 3Y-0.5Zr （wt.%, GW83K） alloy after different heat treatments were investigated. Almost all the eutectic compounds were ...The microstucture, mechanical properties and fracture behaviors of semi-continuous cast Mg-8Gd- 3Y-0.5Zr （wt.%, GW83K） alloy after different heat treatments were investigated. Almost all the eutectic compounds were dissolved into the matrix and there was no evident grain growth after optimum solution treatment at 500 ~C for 4 h. Further ageing at low temperatures led to significant precipitation hardening, which strengthened the alloy. Peak-aged at 200℃, the alloy had the highest ultimate tensile strength （UTS） and lowest elongation at 395 MPa and 2.8%, respectively. When aged at 225℃ for 15 h, the alloy exhibited prominent mechanical performance with UTS and elongation of 363 MPa and 5.8 %, respectively. With regard to microstructure and tensile properties, the processes of 500℃, 4 h ＋ 225℃, 15 h are selected as the optimal heat treatment conditions. The alloy under different conditions shows different fracture behaviors： in the as-cast alloy, a quasi-cleavage pattern is observed; after solution treatment, the alloy exhibits a trans-granular quasi-cleavage fracture; after being peak-aged at 200℃ and 225℃, the fracture mode is a mixed mode of trans-granular and inter-granular fracture, in which the inter-granular mode is dominant in the alloy peak-aged at 200℃.展开更多
Mg-1.5Zn-0.2Zr-xCe (x=0, 0.1, 0.3, 0.5, mass fraction, %) alloys were prepared by conventional semi-continuous casting. The effect of rare earth Ce on the microstructure of Mg-1.5Zn-0.2Zr-xCe alloys was studied and th...Mg-1.5Zn-0.2Zr-xCe (x=0, 0.1, 0.3, 0.5, mass fraction, %) alloys were prepared by conventional semi-continuous casting. The effect of rare earth Ce on the microstructure of Mg-1.5Zn-0.2Zr-xCe alloys was studied and the distribution of Ce was analyzed by optical microscopy (OM), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results indicate that Ce element exists in the form of Mg12Ce phase and has an obvious refining effect on the microstructure of test alloys. As the Ce content increases, the grain size reduces, the grain boundaries turn thinner, and the distribution of Mg12Ce precipitates becomes more and more dispersed. The Mg-1.5Zn-0.2Zr alloy with 0.3%Ce has the best refinement effect. From center to periphery of the ingot, the amount of granular precipitates in the grain reduces. In longitudinal section of the ingot, some relative long columnar grains appear.展开更多
The massive consumption of fossil energy force s people to find new source s of energy.Syngas fermentation has become a hot research field as its high potential in renewable energy production and sustainable developme...The massive consumption of fossil energy force s people to find new source s of energy.Syngas fermentation has become a hot research field as its high potential in renewable energy production and sustainable development.In this study,trophic anaerobic acetogen Morella thermoacetica was successfully immobilized by calcium alginate embedding method.The ability of the immobilized cells on production of acetic acid through syngas fermentation was compared in both airlift and bubble column bioreactors.The bubble column bioreactor was selected as the better type of bioreactor.The production of acetic acid reached 32.3 g·L^(-1) in bubble column bioreactor with a space-time yield of 2.13 g·L^(-1)·d^(-1).The immobilized acetogen could be efficiently reused without significant lag period,even if exposed to air for a short time.A semi-continuous syngas fermentation was performed using immobilized cells,with an average space-time acetic acid yield of 3.20 g·L^(-1)·d^(-1).After 30 days of fermentation,no significant decrea se of the acetic acid production rate was observed.展开更多
The AZ31 alloy ingot with diameter of 110 mm and length of 3500 mm was fabricated successfully. The compositions and microstructure morphologies of the ingot at different locations were performed, which indicated that...The AZ31 alloy ingot with diameter of 110 mm and length of 3500 mm was fabricated successfully. The compositions and microstructure morphologies of the ingot at different locations were performed, which indicated that the chemical composition distributed homogeneously through the whole alloy ingot and the average grain size increased from the surface to the center. The results of the EDS and element face-scanning illustrated that the eutectic compounds mainly consisted of fl-Mg17Al12 and a small amount of fl-Mgl7（AlZn）12. Furthermore, slight improvements of the strength and ductility were observed from the center to the surface along the axial direction of the alloy ingot, while both the strength and elongation to failure of the samples along the radial direction are higher than that along the axial direction. The fine grain strengthening was the main contributors to the strength of the as-casted AZ31 alloy.展开更多
Anaerobic digestion of Chinese cabbage waste was investigated through a pilot-scale two-stage digester at a mesophilic temperature of 37 ℃. In the acidification digester, the main product was acetic acid, with the ma...Anaerobic digestion of Chinese cabbage waste was investigated through a pilot-scale two-stage digester at a mesophilic temperature of 37 ℃. In the acidification digester, the main product was acetic acid, with the maxi- mum concentration of 4289 mg·L^-1 on the fourth day, accounting for 50.32% of total volatile fatty acids. The oxidation reduction potential （ORP） and NH^＋-N level decreased gradually with hydraulic retention time （HRT） of acidification. In the second digestion phase, the maximum methanogenic bacterial concentration reached 9.6 × 10^10ml^-1 at the organic loading rate （OLR） of 3.5-4 kg VS·m^-3, with corresponding HRT of 12-16 days. Accordingly, the optimal biogas production was 0.62 m^3· （kg VS）^-1, with methane content of 65%-68%;. ORP and NH4^＋-N levels in the methanizer remained between -500 and -560 mV and 2000-4500mg· L^-1, respec- tively. Methanococcus and Methanosarcina served as the main methanogens in the anaerobic digester.展开更多
For the large magnesium alloy ingot, there is a considerable difference in cooling rate of different parts in the ingot, which leads to non-uniform distribution of the secondary phases, solute segregation and tensile ...For the large magnesium alloy ingot, there is a considerable difference in cooling rate of different parts in the ingot, which leads to non-uniform distribution of the secondary phases, solute segregation and tensile properties. In the present research, an heavy AZ61 alloy ingot with a diameter of 500 mm was made by semi-continuous casting. The microstructure and mechanical properties at different positions along the radial direction of the large ingot were investigated by using an optical microscope(OM), a scanning electron microscope(SEM), an energy dispersive spectroscope(EDS), and a micro-hardness tester. The results indicate that the microstructure of the AZ61 ingot is non-uniform in different locations. It changes from equiaxed to columnar grains from the center to the edge; the average grain size gradually reduces from 1,005 μm to 763 μm, the secondary dendrite arm spacing reduces from 78 μm to 50 μm, and the Mg17(Al,Zn)12 phase is also refined. The micro-hardness value increases from 55.4 HV at the center to 72.5 HV at the edge of the ingot due to the microstructure differences, and the distribution of micro-hardness at the edge of the ingot is more uniform than that in the center. The tensile properties at room temperature show little difference from the center to the edge of the ingot except that the elongation at the edge is only 3.5%, much lower than that at other areas. The fracture mechanism is ductile fracture at the center and cleavage fracture at the edge of the ingot, and at the 1/2 radius of the ingot, a mixture of ductile and cleavage fracture is present.展开更多
The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and...The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and tensile properties are investigated.The results show that the microstructures of ZK60 magnesium alloy are refined and distribution uniformity of precipitations is observed after applying the middle frequency electromagnetic field.And the tensile properties of the billets produced by middle frequency electromagnetic field are increased.展开更多
Cooling heat flux effect in both primary and secondary cooling zone has been studied in semi-continuous casting of copper billet. Sufficient cooling is essential to reduce casting defects and to get high productivity,...Cooling heat flux effect in both primary and secondary cooling zone has been studied in semi-continuous casting of copper billet. Sufficient cooling is essential to reduce casting defects and to get high productivity, however low rate of solidification is aimed in order to get coarser grain size and softer metal for less losses in extrusion. A three-dimensional numerical model has been developed including solidification behavior of copper through mushy zone. At steady state and constant casting speed, solid shell thickness is monitored during the reduction of cooling rate at mould region to avoid breaking out. Heat flux intensity at mould plays important role not only in the formation of solid shell thickness. But, pool length and mushy zone thickness can be significantly increased by decreasing primary cooling intensity. Increase intensity of secondary cooling zone for two particular cases of primary cooling is tested. First case is tested at mould inlet water temperature of 38°C, and second case at water temperature of 63°C. Results showed that the combination of increasing secondary cooling intensity and reduction of primary cooling intensity can increase pool length and mushy zone thickness. Also, it is shown that, secondary cooling intensity can be magnified by up to 1.5 times for cooling water temperature of 63°C to get pool length close to that of water temperature of 38°C.展开更多
The purpose of this paper is to make a further study on the abstract economy. Here, for the constraint correspondences we assume that they are almost lower semi-continuous (n-lower semi-continuous), which is weaken th...The purpose of this paper is to make a further study on the abstract economy. Here, for the constraint correspondences we assume that they are almost lower semi-continuous (n-lower semi-continuous), which is weaken than that they are lower semi-continuous. Several equilibria existence theorems are proved.展开更多
Previous study found that the pre-treatment of sewage sludge with nitrite improves the biogas production during the mono/two-phase anaerobic digestion (AD) using batch biochemical methane potential tests.In this study...Previous study found that the pre-treatment of sewage sludge with nitrite improves the biogas production during the mono/two-phase anaerobic digestion (AD) using batch biochemical methane potential tests.In this study,the effects of nitrite on hydrolysisacidification,biogas production,volatile solids destruction and microbial composition in semi-continuous two-phase AD of sewage sludge were investigated.The addition of nitrite promotes sludge organic matter solubilization (+484%) and VFAs production (+98.9%),and causes an increase in the VS degradation rate during the AD process (+8.7%).The comparison of biogas production from the acidogenic and methanogenic reactors with or without the addition of nitrite implies that the nitrite has no significant effect on the overall biogas production of two-phase sludge AD process.High-throughput sequencing analysis shows that the microbial communities of bacteria and archaea in two-phase AD reactors significantly changes after the addition of nitrite.Vulcanibacillus (bacteria) and Candidatus Methanofastidiosum (archaea) become the dominant genera in the acidogenic and methanogenic reactors with the nitrite respectively.These findings provide new insights about using nitrite to promote the organic matter degradation of sewage sludge in a semicontinuous two-phase AD system.展开更多
Combustion of agricultural organic solid waste(AOSW)was an ideal solution for their resource utilization in view of their massive annual production and great potential for reduction of fossil fuel utilization.However,...Combustion of agricultural organic solid waste(AOSW)was an ideal solution for their resource utilization in view of their massive annual production and great potential for reduction of fossil fuel utilization.However,high alkali and alkaline earth metals(AAEMs)content in the feedstock can arose severe fouling and slagging issues and thus prohibiting its vast utilization.In this study,a semi-continuous water washing method was proposed to preliminarily remove AAEMs from agricultural organic solid waste and its effects on the combustion behaviors of washed solid product were investigated.Results showed that the combustion index S were improved to 2.63×10-6,over 68%of the total ashes were removed from the cotton stalk,and 96.3%,89.0%and 74.7%of K,Na and Mg were effectively removed,respectively.Moreover,the softening temperature of low temperature ash from the washed sample was as high as 1450◦C,538◦C higher than the low temperature ash from the original sample;the base acid ratio and fouling index were improved from high slagging and fouling risk(1.7 and 90.8)of the original organic solid waste to low and medium risk(0.4 and 3.5),respectively.All these results signified the contributing effect of proposed semi-continuous water washing method on the combustion of agricultural organic solid waste.In a word,this study provided a promising method for fouling and slagging inhibition during the agricultural organic solid waste combustion.展开更多
Large-scale Mg-8Gd-4Y-1Zn-Mn(wt.%)alloy ingot with a diameter of 315 mm and a length of 2410 mm was prepared through semi-continuous casting.Chemical composition,microstructure and mechanical properties at different l...Large-scale Mg-8Gd-4Y-1Zn-Mn(wt.%)alloy ingot with a diameter of 315 mm and a length of 2410 mm was prepared through semi-continuous casting.Chemical composition,microstructure and mechanical properties at different locations of the samples with as-cast,T4 and T6 heat-treated states,respectively,were investigated.No obvious macro segregation has been detected in the high-quality alloy ingot.The main eutectic structures at all different locations are composed ofα-Mg,Mg3RE-type,Mg5RE-type and LPSO phases.At the edge of ingot,the unusual casting twins including 10-12 extension twins and 10-11 compression twins were observed due to the intensive internal stress.In T4 heat-treated alloy,the micro segregation was eliminated.The remained phases wereα-Mg and LPSO phase.Combined with the remarkable age-hardening response,T6 samples exhibits improved mechanical properties at ambient temperature,which derives from the dense prismaticβ'precipitates and profuse basalγ'precipitates.展开更多
Mathematical programming problems with semi-continuous variables and cardinality constraint have many applications,including production planning,portfolio selection,compressed sensing and subset selection in regressio...Mathematical programming problems with semi-continuous variables and cardinality constraint have many applications,including production planning,portfolio selection,compressed sensing and subset selection in regression.This class of problems can be modeled as mixed-integer programs with special structures and are in general NP-hard.In the past few years,based on new reformulations,approximation and relaxation techniques,promising exact and approximate methods have been developed.We survey in this paper these recent developments for this challenging class of mathematical programming problems.展开更多
To increase the efficiency of dye removal from wastewater using mycelial pellets, a bubble column reactor with a simple structure was designed and efficiently used to remove dyes from solution containing dyes. The myc...To increase the efficiency of dye removal from wastewater using mycelial pellets, a bubble column reactor with a simple structure was designed and efficiently used to remove dyes from solution containing dyes. The mycelial pellets were prepared by marine fungus Aspergillus niger ZJUBE-1. Eight dyes were tested as dye targets for the adsorption capacity of mycelial pellets and good removal results were obtained. Eriochrome black T was selected as a model dye for characterizing the adsorption processes in detail. The measurement results of Zeta potential and FT- IR analysis indicate that the electrostatic attraction may play a key role in the biosorption process. The bubble column reactor was utilized to study the batch dye-removal efficiency of mycelial pellets. A re-culture process between every two batches, which was under non-sterile condition, successfully enhanced the utilization of mycelium bio- mass. The dye removal rate is 96.4% after 12 h in the first batch and then decreases slowly in the following batches. This semi-continuous mode, which consists of commutative processes of dye-removal and re-culture, has some outstanding advantages, such as low power consumption, easy operation, high dye removal rate, and efficient biomass utilization.展开更多
基金supported by the National Natural Science Foundation of China(No.52274377 and No.52304391)the Natural Science Foundation of Liaoning Province(No.2023-MSBA-133)the Fundamental Research Funds for the Central Universities(No.N2402010).
文摘High-performance magnesium alloys are moving towards a trend of being produced on a large scale and in an integrated manner.The foundational key to their successful production is the high-quality cast ingots.Magnesium alloys produced through the conventional semi-continuous casting process inevitably contain casting defects,which makes it challenging to manufacture high-quality ingots.The integration of external field assisted controlled solidification technology,which combines physical fields such as electromagnetic and ultrasonic fields with traditional semi-continuous casting processes,enables the production of high-quality magnesium alloy ingots characterized by a homogeneous microstructure and absence of cracks.This article mainly summarizes the technical principles of those external field assisted casting process.The focus is on elaborating the refinement mechanism of different types of electromagnetic fields,ultrasonic fields,and combined physical fields during the solidification of magnesium alloys.Finally,the development prospects of producing highquality magnesium alloy ingots through semi-continuous casting under the external field were discussed.
文摘In this paper, we characterize lower semi-continuous pseudo-convex functions f : X → R ∪ {+ ∞} on convex subset of real Banach spaces K ⊂ X with respect to the pseudo-monotonicity of its Clarke-Rockafellar Sub-differential. We extend the results on the characterizations of non-smooth convex functions f : X → R ∪ {+ ∞} on convex subset of real Banach spaces K ⊂ X with respect to the monotonicity of its sub-differentials to the lower semi-continuous pseudo-convex functions on real Banach spaces.
基金Project (2005CB623707) supported by the National Basic Research Program of China
文摘Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructure and composition distribution of the composite interface were investigated.The results show that semi-solid layer with a certain thickness forms near the interface due to the effect of cooling plate,which ensures successful implementation of casting the composite ingot.Two different aluminum alloys are well bonded metallurgically.The mechanical properties of composite interface were measured,the tensile and shearing strengths of composite interface are 105 and 88 MPa,respectively,which proves that the composite interface is a kind of metallurgical bonding.
文摘Continuous and semi-continuous mining technology has become the main trend of modern surface mines in the world. According to the deposit characteristics of coal basin in China and Chinese situation,this paper discussed the new semi-continuous technology── shovel - transfer wagon-belt conveyor and its application prospect in large surface coal mines in China.
基金This research was financially supported by National Basic Research Program of China(Grant No.2013CB632203)the Liaoning Provincial Natural Science Foundation of China(Grant No.201202072)+1 种基金National Key Technology R&D Program of China(2012BAF09B01)the Fundamental Research Foundation of Central Universities(Grant Nos.N120509002 and N120309003).
文摘Mg-9Gd-3Y-1.5Zn-0.8Zr alloys own high strength,good heat and corrosion resistance.However,it is difficult for the fabrication of large-scale billets,due to the poor deformation ability and strong hot-crack tendency.This work investigated the casting process on the microstructures and flow stress behaviors of the semi-continuous casting billets for the fabrication of large-scale Mg-9Gd-3Y-1.5Zn-0.8Zr billets.The casting process(electromagnetic intensity and casting speed)shows outstanding effects on the microstructures and flow stress behavior of the billets.The billets with the specific casting process(I=68 A,V=65 mm/min)exhibit uniform microstructures and good deformation uniformity.
基金Projects(2007CB613701,2007CB613702)supported by the National Basic Research Program of ChinaProjects(50974037,50904018)supported by the National Natural Science Foundation of China+1 种基金Project(NCET-08-0098)supported by New Century Excellent Talents in University of ChinaProjects(N09040902,N090209002)supported by the Special Foundation for Basic Scientific Research of Central Colleges
文摘Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show that the microstructures of the alloy cast under high-intensity ultrasonic field are fine and uniform,and the grains are equiaxed,rose-shaped or globular with an average size of 257μm.High-intensity field significantly decreases the grain size,changes the morphologies of theβ-Mg17Al12 phases and reduces their area fraction.It is also shown that a proper increase in ultrasonic intensity is helpful to obtain fine,uniform and equiaxed as-cast microstructures.The optimum ultrasonic parameters are that frequency is 20 kHz and ultrasonic intensity is 1 368 W.The mechanical tests show that the mechanical properties of the as-cast AZ80 magnesium alloy billets cast under ultrasonic field are greatly improved,and with increasing the ultrasonic intensity,the mechanical properties of the entire alloy billets are much higher and more uniform than those of the alloy without ultrasonic field.
基金financially supported by the National Natural Science Foundation of China(51074106)the National Key Technology R&D Program of China(2011BAE22B01-5)
文摘The microstucture, mechanical properties and fracture behaviors of semi-continuous cast Mg-8Gd- 3Y-0.5Zr （wt.%, GW83K） alloy after different heat treatments were investigated. Almost all the eutectic compounds were dissolved into the matrix and there was no evident grain growth after optimum solution treatment at 500 ~C for 4 h. Further ageing at low temperatures led to significant precipitation hardening, which strengthened the alloy. Peak-aged at 200℃, the alloy had the highest ultimate tensile strength （UTS） and lowest elongation at 395 MPa and 2.8%, respectively. When aged at 225℃ for 15 h, the alloy exhibited prominent mechanical performance with UTS and elongation of 363 MPa and 5.8 %, respectively. With regard to microstructure and tensile properties, the processes of 500℃, 4 h ＋ 225℃, 15 h are selected as the optimal heat treatment conditions. The alloy under different conditions shows different fracture behaviors： in the as-cast alloy, a quasi-cleavage pattern is observed; after solution treatment, the alloy exhibits a trans-granular quasi-cleavage fracture; after being peak-aged at 200℃ and 225℃, the fracture mode is a mixed mode of trans-granular and inter-granular fracture, in which the inter-granular mode is dominant in the alloy peak-aged at 200℃.
基金Project(2007CB613702) supported by the National Basic Research Program of ChinaProject(CSTD2006AA4012) supported by the Key Technologies R&D Program of the Chongqing Science and Technology Commission
文摘Mg-1.5Zn-0.2Zr-xCe (x=0, 0.1, 0.3, 0.5, mass fraction, %) alloys were prepared by conventional semi-continuous casting. The effect of rare earth Ce on the microstructure of Mg-1.5Zn-0.2Zr-xCe alloys was studied and the distribution of Ce was analyzed by optical microscopy (OM), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results indicate that Ce element exists in the form of Mg12Ce phase and has an obvious refining effect on the microstructure of test alloys. As the Ce content increases, the grain size reduces, the grain boundaries turn thinner, and the distribution of Mg12Ce precipitates becomes more and more dispersed. The Mg-1.5Zn-0.2Zr alloy with 0.3%Ce has the best refinement effect. From center to periphery of the ingot, the amount of granular precipitates in the grain reduces. In longitudinal section of the ingot, some relative long columnar grains appear.
基金supported by the National Key Research and Development Program of China (2019YFA0905000)the National Natural Science Foundation of China (21536004, 21922804, 21776085, and 21871085)the Fundamental Research Funds for the Central Universities (22221818014)。
文摘The massive consumption of fossil energy force s people to find new source s of energy.Syngas fermentation has become a hot research field as its high potential in renewable energy production and sustainable development.In this study,trophic anaerobic acetogen Morella thermoacetica was successfully immobilized by calcium alginate embedding method.The ability of the immobilized cells on production of acetic acid through syngas fermentation was compared in both airlift and bubble column bioreactors.The bubble column bioreactor was selected as the better type of bioreactor.The production of acetic acid reached 32.3 g·L^(-1) in bubble column bioreactor with a space-time yield of 2.13 g·L^(-1)·d^(-1).The immobilized acetogen could be efficiently reused without significant lag period,even if exposed to air for a short time.A semi-continuous syngas fermentation was performed using immobilized cells,with an average space-time acetic acid yield of 3.20 g·L^(-1)·d^(-1).After 30 days of fermentation,no significant decrea se of the acetic acid production rate was observed.
基金Project(2010A090200078)supported by the Special Foundation Project of Industry,University and Research Institute Collaboration of Guangdong Provincial Government and the Ministry of Education,ChinaProject(2010B090500010)supported by the Special Commissioners’ Workstation Construction Project of Guangdong Provincial Government,China
文摘The AZ31 alloy ingot with diameter of 110 mm and length of 3500 mm was fabricated successfully. The compositions and microstructure morphologies of the ingot at different locations were performed, which indicated that the chemical composition distributed homogeneously through the whole alloy ingot and the average grain size increased from the surface to the center. The results of the EDS and element face-scanning illustrated that the eutectic compounds mainly consisted of fl-Mg17Al12 and a small amount of fl-Mgl7（AlZn）12. Furthermore, slight improvements of the strength and ductility were observed from the center to the surface along the axial direction of the alloy ingot, while both the strength and elongation to failure of the samples along the radial direction are higher than that along the axial direction. The fine grain strengthening was the main contributors to the strength of the as-casted AZ31 alloy.
基金the National Science-Technology Support Plan of China(2014BAD02B04)
文摘Anaerobic digestion of Chinese cabbage waste was investigated through a pilot-scale two-stage digester at a mesophilic temperature of 37 ℃. In the acidification digester, the main product was acetic acid, with the maxi- mum concentration of 4289 mg·L^-1 on the fourth day, accounting for 50.32% of total volatile fatty acids. The oxidation reduction potential （ORP） and NH^＋-N level decreased gradually with hydraulic retention time （HRT） of acidification. In the second digestion phase, the maximum methanogenic bacterial concentration reached 9.6 × 10^10ml^-1 at the organic loading rate （OLR） of 3.5-4 kg VS·m^-3, with corresponding HRT of 12-16 days. Accordingly, the optimal biogas production was 0.62 m^3· （kg VS）^-1, with methane content of 65%-68%;. ORP and NH4^＋-N levels in the methanizer remained between -500 and -560 mV and 2000-4500mg· L^-1, respec- tively. Methanococcus and Methanosarcina served as the main methanogens in the anaerobic digester.
基金financially supported by the National Key Technology R&D Program(No.2012BAF09B04)International Technical Cooperation Project(No.2011DFR50950)of the Ministry of Science and Technology of Chinathe Chongqing Science and Technology Commission(No.CSTC2013JCYJC60001)
文摘For the large magnesium alloy ingot, there is a considerable difference in cooling rate of different parts in the ingot, which leads to non-uniform distribution of the secondary phases, solute segregation and tensile properties. In the present research, an heavy AZ61 alloy ingot with a diameter of 500 mm was made by semi-continuous casting. The microstructure and mechanical properties at different positions along the radial direction of the large ingot were investigated by using an optical microscope(OM), a scanning electron microscope(SEM), an energy dispersive spectroscope(EDS), and a micro-hardness tester. The results indicate that the microstructure of the AZ61 ingot is non-uniform in different locations. It changes from equiaxed to columnar grains from the center to the edge; the average grain size gradually reduces from 1,005 μm to 763 μm, the secondary dendrite arm spacing reduces from 78 μm to 50 μm, and the Mg17(Al,Zn)12 phase is also refined. The micro-hardness value increases from 55.4 HV at the center to 72.5 HV at the edge of the ingot due to the microstructure differences, and the distribution of micro-hardness at the edge of the ingot is more uniform than that in the center. The tensile properties at room temperature show little difference from the center to the edge of the ingot except that the elongation at the edge is only 3.5%, much lower than that at other areas. The fracture mechanism is ductile fracture at the center and cleavage fracture at the edge of the ingot, and at the 1/2 radius of the ingot, a mixture of ductile and cleavage fracture is present.
基金Funded by the National Natural Science Foundation of China (NSFC)(No.50475157)the Key Fund of NSFC (No.50234022)the Key Project of Ministry of Education of China (No.105052)
文摘The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and tensile properties are investigated.The results show that the microstructures of ZK60 magnesium alloy are refined and distribution uniformity of precipitations is observed after applying the middle frequency electromagnetic field.And the tensile properties of the billets produced by middle frequency electromagnetic field are increased.
文摘Cooling heat flux effect in both primary and secondary cooling zone has been studied in semi-continuous casting of copper billet. Sufficient cooling is essential to reduce casting defects and to get high productivity, however low rate of solidification is aimed in order to get coarser grain size and softer metal for less losses in extrusion. A three-dimensional numerical model has been developed including solidification behavior of copper through mushy zone. At steady state and constant casting speed, solid shell thickness is monitored during the reduction of cooling rate at mould region to avoid breaking out. Heat flux intensity at mould plays important role not only in the formation of solid shell thickness. But, pool length and mushy zone thickness can be significantly increased by decreasing primary cooling intensity. Increase intensity of secondary cooling zone for two particular cases of primary cooling is tested. First case is tested at mould inlet water temperature of 38°C, and second case at water temperature of 63°C. Results showed that the combination of increasing secondary cooling intensity and reduction of primary cooling intensity can increase pool length and mushy zone thickness. Also, it is shown that, secondary cooling intensity can be magnified by up to 1.5 times for cooling water temperature of 63°C to get pool length close to that of water temperature of 38°C.
文摘The purpose of this paper is to make a further study on the abstract economy. Here, for the constraint correspondences we assume that they are almost lower semi-continuous (n-lower semi-continuous), which is weaken than that they are lower semi-continuous. Several equilibria existence theorems are proved.
基金supported by the China Three Gorges Group Co.LTD (No.202003080)the National Key Research and Development Project (Nos.2020YFC1908702,2021YFC_(3)200704)。
文摘Previous study found that the pre-treatment of sewage sludge with nitrite improves the biogas production during the mono/two-phase anaerobic digestion (AD) using batch biochemical methane potential tests.In this study,the effects of nitrite on hydrolysisacidification,biogas production,volatile solids destruction and microbial composition in semi-continuous two-phase AD of sewage sludge were investigated.The addition of nitrite promotes sludge organic matter solubilization (+484%) and VFAs production (+98.9%),and causes an increase in the VS degradation rate during the AD process (+8.7%).The comparison of biogas production from the acidogenic and methanogenic reactors with or without the addition of nitrite implies that the nitrite has no significant effect on the overall biogas production of two-phase sludge AD process.High-throughput sequencing analysis shows that the microbial communities of bacteria and archaea in two-phase AD reactors significantly changes after the addition of nitrite.Vulcanibacillus (bacteria) and Candidatus Methanofastidiosum (archaea) become the dominant genera in the acidogenic and methanogenic reactors with the nitrite respectively.These findings provide new insights about using nitrite to promote the organic matter degradation of sewage sludge in a semicontinuous two-phase AD system.
基金the financial supports provided by the National Key Research and Development Program of China(2019YFC190252).
文摘Combustion of agricultural organic solid waste(AOSW)was an ideal solution for their resource utilization in view of their massive annual production and great potential for reduction of fossil fuel utilization.However,high alkali and alkaline earth metals(AAEMs)content in the feedstock can arose severe fouling and slagging issues and thus prohibiting its vast utilization.In this study,a semi-continuous water washing method was proposed to preliminarily remove AAEMs from agricultural organic solid waste and its effects on the combustion behaviors of washed solid product were investigated.Results showed that the combustion index S were improved to 2.63×10-6,over 68%of the total ashes were removed from the cotton stalk,and 96.3%,89.0%and 74.7%of K,Na and Mg were effectively removed,respectively.Moreover,the softening temperature of low temperature ash from the washed sample was as high as 1450◦C,538◦C higher than the low temperature ash from the original sample;the base acid ratio and fouling index were improved from high slagging and fouling risk(1.7 and 90.8)of the original organic solid waste to low and medium risk(0.4 and 3.5),respectively.All these results signified the contributing effect of proposed semi-continuous water washing method on the combustion of agricultural organic solid waste.In a word,this study provided a promising method for fouling and slagging inhibition during the agricultural organic solid waste combustion.
基金financially supported by the National Key Research and Development Program of China(No.2016YFB0301100)the Natural Science Foundation Commission of China(Nos.51571044 and 51874062)+2 种基金the Chongqing foundation and advanced research project(No.cstc2019jcyjzdxmX0010)the Fundamental Research Funds for the Central Universities(Nos.2018CDGFCL0005 and 2019CDXYCL0031)the financial support from the China Scholarship Council(No.201906050113)。
文摘Large-scale Mg-8Gd-4Y-1Zn-Mn(wt.%)alloy ingot with a diameter of 315 mm and a length of 2410 mm was prepared through semi-continuous casting.Chemical composition,microstructure and mechanical properties at different locations of the samples with as-cast,T4 and T6 heat-treated states,respectively,were investigated.No obvious macro segregation has been detected in the high-quality alloy ingot.The main eutectic structures at all different locations are composed ofα-Mg,Mg3RE-type,Mg5RE-type and LPSO phases.At the edge of ingot,the unusual casting twins including 10-12 extension twins and 10-11 compression twins were observed due to the intensive internal stress.In T4 heat-treated alloy,the micro segregation was eliminated.The remained phases wereα-Mg and LPSO phase.Combined with the remarkable age-hardening response,T6 samples exhibits improved mechanical properties at ambient temperature,which derives from the dense prismaticβ'precipitates and profuse basalγ'precipitates.
基金supported by the National Natural Science Foundation of China grants(Nos.11101092,10971034)the Joint National Natural Science Foundation of China/Research Grants Council of Hong Kong grant(No.71061160506)the Research Grants Council of Hong Kong grants(Nos.CUHK414808 and CUHK414610).
文摘Mathematical programming problems with semi-continuous variables and cardinality constraint have many applications,including production planning,portfolio selection,compressed sensing and subset selection in regression.This class of problems can be modeled as mixed-integer programs with special structures and are in general NP-hard.In the past few years,based on new reformulations,approximation and relaxation techniques,promising exact and approximate methods have been developed.We survey in this paper these recent developments for this challenging class of mathematical programming problems.
文摘To increase the efficiency of dye removal from wastewater using mycelial pellets, a bubble column reactor with a simple structure was designed and efficiently used to remove dyes from solution containing dyes. The mycelial pellets were prepared by marine fungus Aspergillus niger ZJUBE-1. Eight dyes were tested as dye targets for the adsorption capacity of mycelial pellets and good removal results were obtained. Eriochrome black T was selected as a model dye for characterizing the adsorption processes in detail. The measurement results of Zeta potential and FT- IR analysis indicate that the electrostatic attraction may play a key role in the biosorption process. The bubble column reactor was utilized to study the batch dye-removal efficiency of mycelial pellets. A re-culture process between every two batches, which was under non-sterile condition, successfully enhanced the utilization of mycelium bio- mass. The dye removal rate is 96.4% after 12 h in the first batch and then decreases slowly in the following batches. This semi-continuous mode, which consists of commutative processes of dye-removal and re-culture, has some outstanding advantages, such as low power consumption, easy operation, high dye removal rate, and efficient biomass utilization.
