BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatmen...BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatment plan for a patient initially treated with four-premolar-extraction camouflage, despite indications for orthognathic surgery.CASE SUMMARY A 23-year-old male sought treatment complaining about his unsatisfactory facial appearance. His maxillary first premolars and mandibular second premolars had been extracted, and a fixed appliance had been used to retract his anterior teeth for two years without improvement. He had a convex profile, a gummy smile, lip incompetence, inadequate maxillary incisor inclination, and almost a class I molar relationship. Cephalometric analysis showed severe skeletal class Ⅱ malocclusion(A point-nasion-B point = 11.5°) with a retrognathic mandible(sella-nasion-B point = 75.9°), a protruded maxilla(sella-nasion-A point = 87.4°), and vertical maxillary excess(upper incisor to palatal plane = 33.2 mm). The excessive lingual inclination of the maxillary incisors(upper incisor to nasion-A point line =-5.5°)was due to previous treatment attempts to compensate for the skeletal class Ⅱ malocclusion. The patient was successfully retreated with decompensating orthodontic treatment combined with orthognathic surgery. The maxillary incisors were repositioned and proclined in the alveolar bone, the overjet was increased, and a space was created for orthognathic surgery, including maxillary impaction, anterior maxillary back-setting, and bilateral sagittal split ramus osteotomy to correct his skeletal anteroposterior discrepancy. Gingival display was reduced, and lip competence was restored. In addition, the results remained stable after 2 years. The patient was satisfied with his new profile as well as with the functional malocclusion at the end of treatment.CONCLUSION This case report provides orthodontists a good example of how to treat an adult with severe skeletal class Ⅱ malocclusion with vertical maxillary excess after an unsatisfactory orthodontic camouflage treatment. Orthodontic and orthognathic treatment can significantly correct a patient’s facial appearance.展开更多
BACKGROUND Severe skeletal class II malocclusion is the indication for combined orthodontic and orthognathic treatment.CASE SUMMARY A woman with a chief complaint of a protruding chin and an inability to close her lip...BACKGROUND Severe skeletal class II malocclusion is the indication for combined orthodontic and orthognathic treatment.CASE SUMMARY A woman with a chief complaint of a protruding chin and an inability to close her lips requested orthodontic camouflage.The treatment plan consisted of extracting the right upper third molar,right lower third molar,left lower second molar,and left upper third molar and moving the maxillary dentition distally using a convenient method involving microimplant nail anchors,push springs,long arm traction hooks,and elastic traction chains.After 52 months of treatment,her overbite and overjet were normal,and her facial profile was favorable.CONCLUSION This method can be used for distal movement of the maxillary dentition and to correct severe skeletal class II malocclusion in adults.展开更多
BACKGROUND Correcting severe skeletal class III malocclusion with facial asymmetry in adults through orthodontic treatment alone is difficult.CASE SUMMARY In this case report,we describe orthodontic treatment and lowe...BACKGROUND Correcting severe skeletal class III malocclusion with facial asymmetry in adults through orthodontic treatment alone is difficult.CASE SUMMARY In this case report,we describe orthodontic treatment and lower incisor extraction without orthognathic surgery for a 27-year-old man with a transverse discrepancy.The extraction sites were closed using an elastic chain.The use of intermaxillary elastics,improved super-elastic Ti-Ni alloy wire,and unilateral multibend edgewise arch wire was crucial for correcting facial asymmetry and the midline deviation.CONCLUSION After treatment,the patient had a more symmetrical facial appearance,acceptable overjet and overbite,and midline coincidence.The treatment results remained stable 3 years after treatment.This case report demonstrates that a minimally invasive treatment can successfully correct severe skeletal class III malocclusion with facial asymmetry.展开更多
Aim To determine cephalometrically the mechanism of the treatment effects of non-extraction and multiloop edgewise archwire （MEAW） technique on postpeak Class Ⅱ Division 1 patients. Methodology In this retrospectiv...Aim To determine cephalometrically the mechanism of the treatment effects of non-extraction and multiloop edgewise archwire （MEAW） technique on postpeak Class Ⅱ Division 1 patients. Methodology In this retrospective study, 16 postpeak Class Ⅱ Division 1 patients successfully corrected using a non-extraction and MEAW technique were cephalometrically evaluated and compared with 16 matched control subjects treated using an extraction technique. Using CorelDRAW software, standardized digital cephalograms preand post-active treatments were traced and a reference grid was set up. The superimpositions were based on the cranial base, the mandibular and the maxilla regions,and skeletal and dental changes were measured. Changes following treatment were evaluated using the paired-sample t-test. Student＇s t-test for unpaired samples was used to assess the differences in changes between the MEAW and the extraction control groups. Results The correction of the molar relationships comprised 54% skeletal change （mainly the advancement of the mandible） and 46% dental change. Correction of the anterior teeth relationships comprised 30% skeletal change and 70% dental change. Conclusion The MEAW technique can produce the desired vertical and sagittal movement of the tooth segment and then effectively stimulate mandibular advancement by utilizing the residual growth potential of the condyle.展开更多
Objective: To evaluate the effects of the Chinese Ni-Ti coil-springs appliance on distalization of maxillary molars and the reciprocal effects on the anchorage teeth. Methods:Twenty-four adolescent patients(12 boys,12...Objective: To evaluate the effects of the Chinese Ni-Ti coil-springs appliance on distalization of maxillary molars and the reciprocal effects on the anchorage teeth. Methods:Twenty-four adolescent patients(12 boys,12 girls) with Class Ⅱ malocclusion were selected and the coil-springs appliance was used during the treatment. Pre- and postdistalization lateral cephalometric radiographs were analyzed and compared. Results: The average time for the correction of Class Ⅱ molar relationship was 4.6 months. And the mean distance of molar distalization was 4.4 mm. The Chinese Ni-Ti coil-springs also demostrated less tipping and better bodily movement of maxillary molars. Conclusion: This study suggests that the Chinese Ni-Ti coil-springs appliance distalizes the upper molar significantly, while there is no remarkable loss of anchorage because of patients’ wearing headgear with J hooks at night and Class Ⅱ elastics in the day time.展开更多
文摘BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatment plan for a patient initially treated with four-premolar-extraction camouflage, despite indications for orthognathic surgery.CASE SUMMARY A 23-year-old male sought treatment complaining about his unsatisfactory facial appearance. His maxillary first premolars and mandibular second premolars had been extracted, and a fixed appliance had been used to retract his anterior teeth for two years without improvement. He had a convex profile, a gummy smile, lip incompetence, inadequate maxillary incisor inclination, and almost a class I molar relationship. Cephalometric analysis showed severe skeletal class Ⅱ malocclusion(A point-nasion-B point = 11.5°) with a retrognathic mandible(sella-nasion-B point = 75.9°), a protruded maxilla(sella-nasion-A point = 87.4°), and vertical maxillary excess(upper incisor to palatal plane = 33.2 mm). The excessive lingual inclination of the maxillary incisors(upper incisor to nasion-A point line =-5.5°)was due to previous treatment attempts to compensate for the skeletal class Ⅱ malocclusion. The patient was successfully retreated with decompensating orthodontic treatment combined with orthognathic surgery. The maxillary incisors were repositioned and proclined in the alveolar bone, the overjet was increased, and a space was created for orthognathic surgery, including maxillary impaction, anterior maxillary back-setting, and bilateral sagittal split ramus osteotomy to correct his skeletal anteroposterior discrepancy. Gingival display was reduced, and lip competence was restored. In addition, the results remained stable after 2 years. The patient was satisfied with his new profile as well as with the functional malocclusion at the end of treatment.CONCLUSION This case report provides orthodontists a good example of how to treat an adult with severe skeletal class Ⅱ malocclusion with vertical maxillary excess after an unsatisfactory orthodontic camouflage treatment. Orthodontic and orthognathic treatment can significantly correct a patient’s facial appearance.
基金Supported by Medical Science Research Project Plan by Health Commission of the Hebei Province,No.20220063.
文摘BACKGROUND Severe skeletal class II malocclusion is the indication for combined orthodontic and orthognathic treatment.CASE SUMMARY A woman with a chief complaint of a protruding chin and an inability to close her lips requested orthodontic camouflage.The treatment plan consisted of extracting the right upper third molar,right lower third molar,left lower second molar,and left upper third molar and moving the maxillary dentition distally using a convenient method involving microimplant nail anchors,push springs,long arm traction hooks,and elastic traction chains.After 52 months of treatment,her overbite and overjet were normal,and her facial profile was favorable.CONCLUSION This method can be used for distal movement of the maxillary dentition and to correct severe skeletal class II malocclusion in adults.
基金China Medical University and Hospital,Taichung City,Taiwan,No.DMR-111-044.
文摘BACKGROUND Correcting severe skeletal class III malocclusion with facial asymmetry in adults through orthodontic treatment alone is difficult.CASE SUMMARY In this case report,we describe orthodontic treatment and lower incisor extraction without orthognathic surgery for a 27-year-old man with a transverse discrepancy.The extraction sites were closed using an elastic chain.The use of intermaxillary elastics,improved super-elastic Ti-Ni alloy wire,and unilateral multibend edgewise arch wire was crucial for correcting facial asymmetry and the midline deviation.CONCLUSION After treatment,the patient had a more symmetrical facial appearance,acceptable overjet and overbite,and midline coincidence.The treatment results remained stable 3 years after treatment.This case report demonstrates that a minimally invasive treatment can successfully correct severe skeletal class III malocclusion with facial asymmetry.
文摘Aim To determine cephalometrically the mechanism of the treatment effects of non-extraction and multiloop edgewise archwire （MEAW） technique on postpeak Class Ⅱ Division 1 patients. Methodology In this retrospective study, 16 postpeak Class Ⅱ Division 1 patients successfully corrected using a non-extraction and MEAW technique were cephalometrically evaluated and compared with 16 matched control subjects treated using an extraction technique. Using CorelDRAW software, standardized digital cephalograms preand post-active treatments were traced and a reference grid was set up. The superimpositions were based on the cranial base, the mandibular and the maxilla regions,and skeletal and dental changes were measured. Changes following treatment were evaluated using the paired-sample t-test. Student＇s t-test for unpaired samples was used to assess the differences in changes between the MEAW and the extraction control groups. Results The correction of the molar relationships comprised 54% skeletal change （mainly the advancement of the mandible） and 46% dental change. Correction of the anterior teeth relationships comprised 30% skeletal change and 70% dental change. Conclusion The MEAW technique can produce the desired vertical and sagittal movement of the tooth segment and then effectively stimulate mandibular advancement by utilizing the residual growth potential of the condyle.
文摘Objective: To evaluate the effects of the Chinese Ni-Ti coil-springs appliance on distalization of maxillary molars and the reciprocal effects on the anchorage teeth. Methods:Twenty-four adolescent patients(12 boys,12 girls) with Class Ⅱ malocclusion were selected and the coil-springs appliance was used during the treatment. Pre- and postdistalization lateral cephalometric radiographs were analyzed and compared. Results: The average time for the correction of Class Ⅱ molar relationship was 4.6 months. And the mean distance of molar distalization was 4.4 mm. The Chinese Ni-Ti coil-springs also demostrated less tipping and better bodily movement of maxillary molars. Conclusion: This study suggests that the Chinese Ni-Ti coil-springs appliance distalizes the upper molar significantly, while there is no remarkable loss of anchorage because of patients’ wearing headgear with J hooks at night and Class Ⅱ elastics in the day time.
