As inferred from earthquake engineering literature,considering soil structure interaction(SSI)effects is important in evaluating the response of transmission line towers(TLT)to dynamic loads such as impulse loads.The ...As inferred from earthquake engineering literature,considering soil structure interaction(SSI)effects is important in evaluating the response of transmission line towers(TLT)to dynamic loads such as impulse loads.The proposed study investigates the dynamic effects of SSI on TLT behavior.Linear and non-linearmodels are studied.In the linearmodel,the soil is represented by complex impedances,dependent of dynamic frequency,determined from numerical simulations.The nonlinearmodel considers the soil non-linear behavior in its material constitutive law and foundation uplift in a non-linear time history analysis.The simplified structure behavior of a typical lattice transmission tower is assessed.The analysis of frequency and time domain are followed through varying soil stiffness and damping values.Three different shock durations are investigated.The soil-structure system with equivalent dynamic properties is determined.The behaviors achieved utilizing a rigid and a flexible base for the structures is compared to estimate the impact of taking SSI into account in the calculation.The current mainstream approach in structural engineering,emphasizing the importance of the SSI effect,is illustrated using an example where the SSI effect could be detrimental to the structure.Furthermore,the non-linear analysis results are analyzed to show the linear approach’s limitations in the event of grand deformations.展开更多
The thermally induced cyclic loading on integral bridge abutments causes soil deformation and lateral stress ratcheting behind the abutment wall due to the expansion and contraction of the bridge deck.The forward and ...The thermally induced cyclic loading on integral bridge abutments causes soil deformation and lateral stress ratcheting behind the abutment wall due to the expansion and contraction of the bridge deck.The forward and backward movements of the abutment in response to the expansion/contraction of the bridge deck lead to the formation of settlement trough and surface heaving,frequently creating a bump at the bridge approach and increasing the lateral earth pressure behind the abutment.Measures to reduce the bump at the bridge approach,including several treatment methods,such as compaction of selected backfill materials,grout injection,installation of approach slab,and using a layer of compressible inclusion material behind the abutment were proposed.However,these guidelines still lack sufficient design details and there are limited experimental findings to validate design assumptions.In this paper,the use of engineered compressible materials to alleviate the lateral earth pressure ratcheting and settlement at the bridge approach is investigated.The comparative study is presented for the soil-inclusion,material-structure and soil-structure interactions for an integral bridge under three different backfill conditions,i.e.(a)sand,(b)sand and EPS geofoam,and(c)sand and Infinergy®.The study was conducted in a special large-scale test chamber with a semi-scale abutment to gain better insights into the soil-structure interaction(SSI).The kinematics and rearrangement of the soil during the cyclic loading have been investigated to identify the mitigating effects of compressible inclusions.The comparative study indicates that both compressible inclusions perform comparatively well,however,Infinergy®is a better alternative than the medium-density EPS geofoam,as it works more effectively to reduce the backfill settlement and heaving as well as soil ratcheting effects under cyclic translational movement.展开更多
The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident...The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident wave into equivalent loads on the cutoff boundaries. The wave method has high precision, but the implementation is complicated, especially for three-dimensional models. By deducing another form of equivalent input seismic loads in the fi nite element model, a new seismic wave input method is proposed. In the new method, by imposing the displacements of the free wave fi eld on the nodes of the substructure composed of elements that contain artifi cial boundaries, the equivalent input seismic loads are obtained through dynamic analysis of the substructure. Subsequently, the equivalent input seismic loads are imposed on the artifi cial boundary nodes to complete the seismic wave input and perform seismic analysis of the soil-structure dynamic interaction model. Compared with the wave method, the new method is simplifi ed by avoiding the complex processes of calculating the equivalent input seismic loads. The validity of the new method is verifi ed by the dynamic analysis numerical examples of the homogeneous and layered half space under vertical and oblique incident seismic waves.展开更多
The paper focusses on the use of physical modelling in ground movements(induced by underground cavity collapse or mining/tunnelling)and associated soil-structure interaction issues.The paper presents first an overview...The paper focusses on the use of physical modelling in ground movements(induced by underground cavity collapse or mining/tunnelling)and associated soil-structure interaction issues.The paper presents first an overview of using 1 g physical models to solve geotechnical problems and soil-structure interactions related to vertical ground movements.Then the lg physical modelling application is illustrated to study the development of damage in masonry structure due to subsidence and cavity collapse.A largescale 1 g physical model with a 6 m^3 container and 15 electric jacks is presented with the use of a threedimensional(3D)image correlation technique.The influence of structure position on the subsidence trough is analysed in terms of crack density and damage level.The obtained results can improve the methodology and practice for evaluation of damage in masonry structures.Nevertheless,ideal physical model is difficult to achieve.Thus,future improvement of physical models(analogue materials and instrumentation)could provide new opportunities for using 1 g physical models in geotechnical and soilstructure applications and research projects.展开更多
A closed-form wave function analytic solution of two-dimensional scattering and diffraction of incident plane SH-waves by a fl exible wall on a rigid shallow circular foundation embedded in an elastic half-space is pr...A closed-form wave function analytic solution of two-dimensional scattering and diffraction of incident plane SH-waves by a fl exible wall on a rigid shallow circular foundation embedded in an elastic half-space is presented. This research generalizes the previous solution by Trifunac in 1972, which tackled only the semi-circular foundation, to arbitrary shallow circular-arc foundation cases, and is thus comparatively more realistic. Ground surface displacement spectra at higher frequencies are also obtained. As an analytical series solution, the accuracy and error analysis of the numerical results are also discussed. It was observed from the results that the rise-to-span ratio of the foundation profi le, frequency of incident waves, and mass ratios of different media(foundation-structure-soil) are the three primary factors that may affect the surface ground motion amplitudes near the structure.展开更多
In order to clarify the damage mechanism of the subway structure, the dynamic soil-structure interaction and the dynamic forces acting on the structure, a series of shaking table tests and simulation analyses were per...In order to clarify the damage mechanism of the subway structure, the dynamic soil-structure interaction and the dynamic forces acting on the structure, a series of shaking table tests and simulation analyses were performed. The seismic response of the structure and the dynamic forces acting on the structure due to sinusoidal and random waves were investigated with special attention to the dynamic soil-structure interaction. The result shows that the compression seismic soil pressures and extension seismic soil pressures simultaneously act on the sidewalls, and big shear stress also acts on the ceiling slab due to horizontal excitation. The seismic soil pressure could be approximated to hyperbola curve, and reached a peak value with increase of the shear strain of the model ground. In addition, a slide and exfoliation phenomenon between the structure and the surrounding ground was simulated, using the nonlinear analyses. The foundation is provided for amending the calculation method of seismic soil pressure and improving the anti-earthquake designing level of underground structure.展开更多
The concept of structure-soil-structure dynamic interaction was introduced and the research methods were summarized.Based on lots of documents,a systematic summary of the history and current situation of structure-soi...The concept of structure-soil-structure dynamic interaction was introduced and the research methods were summarized.Based on lots of documents,a systematic summary of the history and current situation of structure-soil-structure dynamic interaction research considering adjacent structures was proposed as reference for researchers.The existing matter and the prospect of future research trend in this field was also examined.展开更多
It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings.The effect of using different code-specified lateral load patterns on the seismic performanc...It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings.The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades.However,no investigation has yet been carried out for the case of soil-structure systems.In the present study,through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns,including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils,the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated.The results of this study show that depending on the level of inelasticity,soil flexibility and number of degrees-of-freedoms(DOFs),structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems.It is also found that at high levels of inelasticity,the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.展开更多
The direct finite element method is a type commonly used for nonlinear seismic soil-structure interaction(SSI)analysis.This method introduces a truncated boundary referred to as an artificial boundary meant to divide ...The direct finite element method is a type commonly used for nonlinear seismic soil-structure interaction(SSI)analysis.This method introduces a truncated boundary referred to as an artificial boundary meant to divide the soil-structure system into finite and infinite domains.An artificial boundary condition is used on a truncated boundary to achieve seismic input and simulate the wave radiation effect of infinite domain.When the soil layer is particularly thick,especially for a three-dimensional problem,the computational efficiency of seismic SSI analysis is very low due to the large size of the finite element model,which contains an whole thick soil layer.In this paper,an accurate and efficient scheme is developed to solve the nonlinear seismic SSI problem regarding thick soil layers.The process consists of nonlinear site response and SSI analysis.The nonlinear site response analysis is still performed for the whole thick soil layer.The artificial boundary at the bottom of the SSI analysis model is subsequently relocated upward from the bottom of the soil layer(bedrock surface)to the location nearest to the structure as possible.Finally,three types of typical sites and underground structures are adopted with seismic SSI analysis to evaluate the accuracy and efficiency of the proposed efficient analysis scheme.展开更多
Elastic response spectra that take into account the effects of soil-structure interaction on soft soils are developed. The response spectra are calculated utilizing a 3 DOF system including deformations of the superst...Elastic response spectra that take into account the effects of soil-structure interaction on soft soils are developed. The response spectra are calculated utilizing a 3 DOF system including deformations of the superstructure and foundation. The equations of motion of the system are solved using direct integration under normalized earthquake records. Statistical processing of the results is implemented resulting in response spectra for "short and dense buildings with low interaction", "short and dense buildings with high interaction", "tall and light buildings with low interaction" and "tall and light buildings with high interaction". The resulting response spectra are smoothed and discussed.展开更多
Analysis of soil-structure interaction is commonly conducted by dividing the infinite domain of the soil into two domains:interior and exterior domains.The interior domain is bounded in a small region,while the exteri...Analysis of soil-structure interaction is commonly conducted by dividing the infinite domain of the soil into two domains:interior and exterior domains.The interior domain is bounded in a small region,while the exterior domain is replaced by artificial boundary conditions.The choice of artificial boundary conditions is a critical issue in the analysis of soil-structure interaction problems.Perfectly matched discrete layer(PMDL)has been proved as a good approach for modeling the exterior domain.In this study,a modified version of the PMDLs,i.e.PMDLs with analytical wavelengths(AW-PMDLs),is used in the soil-structure interaction analysis in time domain,which essentially can be regarded as an extension of the analysis in frequency domain,being previously proven to be effective.Numerical verifications are implemented.The results demonstrate that the proposed method performs well in the analysis of soilstructure interaction problems in time domain.展开更多
The perceiving local site effects on strong ground motion are particularly important for the mitigation of earthquake disasters as well as future earthquake resistant design. The primary objective of this study is to ...The perceiving local site effects on strong ground motion are particularly important for the mitigation of earthquake disasters as well as future earthquake resistant design. The primary objective of this study is to investigate seismic behavior of building tube structure system with respect to dense soil-structure interaction (sand dense and very hard clay soil with a thickness greater than 30 m). For this purpose, the studied building in this paper is placed over two other different modeled soil types and results of seismic behavior of building for three soil types are compared with each other. Through response spectrum analyses, influence of different sub-soils (dense and loose soil) was determined on seismic behavior of 40-storey building reinforced concrete (RC) with tube in tube structure system and performance of each model was assessed in terms of shear lag behavior, overall and critical (maximum) story drifts. Results illustrate that loose soils amplify seismic waves and increase building drifts and shear lag behavior.展开更多
This article focuses on the study of the behavior of a soil mass under a plate subjected to a uniformly distributed load. The aim of this paper is to highlight the soil-structure interaction with a linear variation of...This article focuses on the study of the behavior of a soil mass under a plate subjected to a uniformly distributed load. The aim of this paper is to highlight the soil-structure interaction with a linear variation of the mechanical properties of the soil with the depth. The theory of plates and the soil-structure interaction has allowed reaching the general equation of the problem which depends on both the mechanical properties of the concrete and the subgrade. This study shows that the linearity of the elastic modulus of subgrade leads to larger displacements when this modulus is assumed to be constant in the soil mass. It also shows that the Poisson’s ratio of soil and mechanical properties of the concrete have an insignificant influence on the displacements. This analysis also shows that the points in the upper half-thickness of soil are the most sensitive to the parameters of the model.展开更多
This paper is devoted to a new approach—the dynamic response of Soil-Structure System (SSS), the far field of which is discretized by decay or mapped elastodynamic infinite elements, based on scaling modified Bessel ...This paper is devoted to a new approach—the dynamic response of Soil-Structure System (SSS), the far field of which is discretized by decay or mapped elastodynamic infinite elements, based on scaling modified Bessel shape functions are to be calculated. These elements are appropriate for Soil-Structure Interaction problems, solved in time or frequency domain and can be treated as a new form of the recently proposed elastodynamic infinite elements with united shape functions (EIEUSF) infinite elements. Here the time domain form of the equations of motion is demonstrated and used in the numerical example. In the paper only the formulation of 2D horizontal type infinite elements (HIE) is used, but by similar techniques 2D vertical (VIE) and 2D corner (CIE) infinite elements can also be added. Continuity along the artificial boundary (the line between finite and infinite elements) is discussed as well and the application of the proposed elastodynamical infinite elements in the Finite element method is explained in brief. A numerical example shows the computational efficiency and accuracy of the proposed infinite elements, based on scaling Bessel shape functions.展开更多
The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early c...The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early contact and contact penetration can occur when the contact conditions are unsuitable,and(2)the method is not available for contact problems involving rigid-nonrigid materials,which can cause numerical instability.This study presents a new hybrid contact approach for the MPM to address these limitations to simulate the soil and structure interactions.The approach combines the advantages of point-point and point-segment contacts to implement contact detection,satisfying the impenetrability condition and smoothing the corner contact problem.The proposed approach is first validated through a disk test on an inclined slope.Then,several typical cases,such as granular collapse,bearing capacity,and deformation of a flexible retaining wall,are simulated to demonstrate the robustness of the proposed approach compared with FEM or analytical solutions.Finally,the proposed method is used to simulate the impact of sand flow on a deformable structure.The results show that the proposed contact approach can well describe the phenomenon of soil-structure interaction problems.展开更多
To investigate the effect of soil-pile-structure interaction(SPSI effect)on the dynamic response of a baseisolated structure with buried footings on a pile foundation,certain shake table tests are previously conducted...To investigate the effect of soil-pile-structure interaction(SPSI effect)on the dynamic response of a baseisolated structure with buried footings on a pile foundation,certain shake table tests are previously conducted.Based on the test results and the existing related studies,an efficient simplified model and a corresponding calculation method are verified for estimating the dynamic characteristics of a base-isolated structure with buried footings on a pile foundation with the SSI effect.In this method,the solutions by Veletsos and co-workers for a non-isolated structure with the SSI effect are verified and advanced for a base-isolated structure,and the solutions by Maravas and co-workers for a non-isolated structure on a pile foundation are introduced to consider the effect of the piles.By comparison with the shake table test,this work proves that the simplified method can efficiently estimate the dynamic responses of a base-isolated structure with buried footings on a pile foundation.Using parameter analysis,this work also shows that the dynamic characteristics of a non-isolated structure are quite similar to those of the base-isolated structure when the soil foundation is sufficiently soft,which means that the isolation layer gradually loses its isolation function as the soil foundation softens.展开更多
The objective of the current study is to propose an expert system framework based on a supervised machine learning technique(MLT)to predict the seismic performance of low-to mid-rise frame structures considering soil-...The objective of the current study is to propose an expert system framework based on a supervised machine learning technique(MLT)to predict the seismic performance of low-to mid-rise frame structures considering soil-structure interaction(SSI).The methodology of the framework is based on examining different MLTs to obtain the highest possible accuracy for prediction.Within the MLT,a sensitivity analysis was conducted on the main SSI parameters to select the most effective input parameters.Multiple limit state criteria were used for the seismic evaluation within the process.A new global seismic assessment ratio was introduced that considers both serviceability and strength aspects by utilizing three different engineering demand parameters(EDPs).The proposed framework is novel because it enables the designer to seismically assess the structure,while simultaneously considering different EDPs and multiple limit states.Moreover,the framework provides recommendations for building component design based on the newly introduced global seismic assessment ratio,which considers different levels of seismic hazards.The proposed framework was validated through comparison using non-linear time history(NLTH)analysis.The results show that the proposed framework provides more accurate results than conventional methods.Finally,the generalization potential of the proposed framework was tested by investigating two different types of structural irregularities,namely,stiffness and mass irregularities.The results from the framework were in good agreement with the NLTH analysis results for the selected case studies,and peak ground acceleration(PGA)was found to be the most influential input parameter in the assessment process for the case study models investigated.The proposed framework shows high generalization potential for low-to mid-rise structures.展开更多
基金This work was financed by The Natural Sciences and Engineering Research Council of Canada(NSERC)and Hydro-Québec Transénergy(HQTE).
文摘As inferred from earthquake engineering literature,considering soil structure interaction(SSI)effects is important in evaluating the response of transmission line towers(TLT)to dynamic loads such as impulse loads.The proposed study investigates the dynamic effects of SSI on TLT behavior.Linear and non-linearmodels are studied.In the linearmodel,the soil is represented by complex impedances,dependent of dynamic frequency,determined from numerical simulations.The nonlinearmodel considers the soil non-linear behavior in its material constitutive law and foundation uplift in a non-linear time history analysis.The simplified structure behavior of a typical lattice transmission tower is assessed.The analysis of frequency and time domain are followed through varying soil stiffness and damping values.Three different shock durations are investigated.The soil-structure system with equivalent dynamic properties is determined.The behaviors achieved utilizing a rigid and a flexible base for the structures is compared to estimate the impact of taking SSI into account in the calculation.The current mainstream approach in structural engineering,emphasizing the importance of the SSI effect,is illustrated using an example where the SSI effect could be detrimental to the structure.Furthermore,the non-linear analysis results are analyzed to show the linear approach’s limitations in the event of grand deformations.
基金The authors gratefully acknowledge and thank BASF for providing the Infinergymaterial used in this research.The continuous technical support provided by Mr.Van Doan and Advanced Materials Characterisation Facility(AMCF)at Western Sydney University(WSU)are also gratefully acknowledged.This research is supported by the Graduate student research fund of WSU.This research did not receive any specific grant from funding agencies in the public,commercial,or not-for-profit sectors.
文摘The thermally induced cyclic loading on integral bridge abutments causes soil deformation and lateral stress ratcheting behind the abutment wall due to the expansion and contraction of the bridge deck.The forward and backward movements of the abutment in response to the expansion/contraction of the bridge deck lead to the formation of settlement trough and surface heaving,frequently creating a bump at the bridge approach and increasing the lateral earth pressure behind the abutment.Measures to reduce the bump at the bridge approach,including several treatment methods,such as compaction of selected backfill materials,grout injection,installation of approach slab,and using a layer of compressible inclusion material behind the abutment were proposed.However,these guidelines still lack sufficient design details and there are limited experimental findings to validate design assumptions.In this paper,the use of engineered compressible materials to alleviate the lateral earth pressure ratcheting and settlement at the bridge approach is investigated.The comparative study is presented for the soil-inclusion,material-structure and soil-structure interactions for an integral bridge under three different backfill conditions,i.e.(a)sand,(b)sand and EPS geofoam,and(c)sand and Infinergy®.The study was conducted in a special large-scale test chamber with a semi-scale abutment to gain better insights into the soil-structure interaction(SSI).The kinematics and rearrangement of the soil during the cyclic loading have been investigated to identify the mitigating effects of compressible inclusions.The comparative study indicates that both compressible inclusions perform comparatively well,however,Infinergy®is a better alternative than the medium-density EPS geofoam,as it works more effectively to reduce the backfill settlement and heaving as well as soil ratcheting effects under cyclic translational movement.
基金National Natural Science Foundation of China under Grant No.51478247National Key Research and Development Program of China under Grant No.2016YFC1402800
文摘The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident wave into equivalent loads on the cutoff boundaries. The wave method has high precision, but the implementation is complicated, especially for three-dimensional models. By deducing another form of equivalent input seismic loads in the fi nite element model, a new seismic wave input method is proposed. In the new method, by imposing the displacements of the free wave fi eld on the nodes of the substructure composed of elements that contain artifi cial boundaries, the equivalent input seismic loads are obtained through dynamic analysis of the substructure. Subsequently, the equivalent input seismic loads are imposed on the artifi cial boundary nodes to complete the seismic wave input and perform seismic analysis of the soil-structure dynamic interaction model. Compared with the wave method, the new method is simplifi ed by avoiding the complex processes of calculating the equivalent input seismic loads. The validity of the new method is verifi ed by the dynamic analysis numerical examples of the homogeneous and layered half space under vertical and oblique incident seismic waves.
文摘The paper focusses on the use of physical modelling in ground movements(induced by underground cavity collapse or mining/tunnelling)and associated soil-structure interaction issues.The paper presents first an overview of using 1 g physical models to solve geotechnical problems and soil-structure interactions related to vertical ground movements.Then the lg physical modelling application is illustrated to study the development of damage in masonry structure due to subsidence and cavity collapse.A largescale 1 g physical model with a 6 m^3 container and 15 electric jacks is presented with the use of a threedimensional(3D)image correlation technique.The influence of structure position on the subsidence trough is analysed in terms of crack density and damage level.The obtained results can improve the methodology and practice for evaluation of damage in masonry structures.Nevertheless,ideal physical model is difficult to achieve.Thus,future improvement of physical models(analogue materials and instrumentation)could provide new opportunities for using 1 g physical models in geotechnical and soilstructure applications and research projects.
文摘A closed-form wave function analytic solution of two-dimensional scattering and diffraction of incident plane SH-waves by a fl exible wall on a rigid shallow circular foundation embedded in an elastic half-space is presented. This research generalizes the previous solution by Trifunac in 1972, which tackled only the semi-circular foundation, to arbitrary shallow circular-arc foundation cases, and is thus comparatively more realistic. Ground surface displacement spectra at higher frequencies are also obtained. As an analytical series solution, the accuracy and error analysis of the numerical results are also discussed. It was observed from the results that the rise-to-span ratio of the foundation profi le, frequency of incident waves, and mass ratios of different media(foundation-structure-soil) are the three primary factors that may affect the surface ground motion amplitudes near the structure.
文摘In order to clarify the damage mechanism of the subway structure, the dynamic soil-structure interaction and the dynamic forces acting on the structure, a series of shaking table tests and simulation analyses were performed. The seismic response of the structure and the dynamic forces acting on the structure due to sinusoidal and random waves were investigated with special attention to the dynamic soil-structure interaction. The result shows that the compression seismic soil pressures and extension seismic soil pressures simultaneously act on the sidewalls, and big shear stress also acts on the ceiling slab due to horizontal excitation. The seismic soil pressure could be approximated to hyperbola curve, and reached a peak value with increase of the shear strain of the model ground. In addition, a slide and exfoliation phenomenon between the structure and the surrounding ground was simulated, using the nonlinear analyses. The foundation is provided for amending the calculation method of seismic soil pressure and improving the anti-earthquake designing level of underground structure.
文摘The concept of structure-soil-structure dynamic interaction was introduced and the research methods were summarized.Based on lots of documents,a systematic summary of the history and current situation of structure-soil-structure dynamic interaction research considering adjacent structures was proposed as reference for researchers.The existing matter and the prospect of future research trend in this field was also examined.
文摘It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings.The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades.However,no investigation has yet been carried out for the case of soil-structure systems.In the present study,through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns,including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils,the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated.The results of this study show that depending on the level of inelasticity,soil flexibility and number of degrees-of-freedoms(DOFs),structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems.It is also found that at high levels of inelasticity,the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.
基金National Basic Research Program of China under Grant No.2015CB057902Ministry of Education Innovation Team of China under Grant No.IRT_17R03National Natural Science Foundation of China under Grant Nos.51421005 and 51678015。
文摘The direct finite element method is a type commonly used for nonlinear seismic soil-structure interaction(SSI)analysis.This method introduces a truncated boundary referred to as an artificial boundary meant to divide the soil-structure system into finite and infinite domains.An artificial boundary condition is used on a truncated boundary to achieve seismic input and simulate the wave radiation effect of infinite domain.When the soil layer is particularly thick,especially for a three-dimensional problem,the computational efficiency of seismic SSI analysis is very low due to the large size of the finite element model,which contains an whole thick soil layer.In this paper,an accurate and efficient scheme is developed to solve the nonlinear seismic SSI problem regarding thick soil layers.The process consists of nonlinear site response and SSI analysis.The nonlinear site response analysis is still performed for the whole thick soil layer.The artificial boundary at the bottom of the SSI analysis model is subsequently relocated upward from the bottom of the soil layer(bedrock surface)to the location nearest to the structure as possible.Finally,three types of typical sites and underground structures are adopted with seismic SSI analysis to evaluate the accuracy and efficiency of the proposed efficient analysis scheme.
文摘Elastic response spectra that take into account the effects of soil-structure interaction on soft soils are developed. The response spectra are calculated utilizing a 3 DOF system including deformations of the superstructure and foundation. The equations of motion of the system are solved using direct integration under normalized earthquake records. Statistical processing of the results is implemented resulting in response spectra for "short and dense buildings with low interaction", "short and dense buildings with high interaction", "tall and light buildings with low interaction" and "tall and light buildings with high interaction". The resulting response spectra are smoothed and discussed.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)the Ministry of Trade,Industry and Energy(MOTIE)of the Republic of Korea(Grant No.20171510101960).
文摘Analysis of soil-structure interaction is commonly conducted by dividing the infinite domain of the soil into two domains:interior and exterior domains.The interior domain is bounded in a small region,while the exterior domain is replaced by artificial boundary conditions.The choice of artificial boundary conditions is a critical issue in the analysis of soil-structure interaction problems.Perfectly matched discrete layer(PMDL)has been proved as a good approach for modeling the exterior domain.In this study,a modified version of the PMDLs,i.e.PMDLs with analytical wavelengths(AW-PMDLs),is used in the soil-structure interaction analysis in time domain,which essentially can be regarded as an extension of the analysis in frequency domain,being previously proven to be effective.Numerical verifications are implemented.The results demonstrate that the proposed method performs well in the analysis of soilstructure interaction problems in time domain.
文摘The perceiving local site effects on strong ground motion are particularly important for the mitigation of earthquake disasters as well as future earthquake resistant design. The primary objective of this study is to investigate seismic behavior of building tube structure system with respect to dense soil-structure interaction (sand dense and very hard clay soil with a thickness greater than 30 m). For this purpose, the studied building in this paper is placed over two other different modeled soil types and results of seismic behavior of building for three soil types are compared with each other. Through response spectrum analyses, influence of different sub-soils (dense and loose soil) was determined on seismic behavior of 40-storey building reinforced concrete (RC) with tube in tube structure system and performance of each model was assessed in terms of shear lag behavior, overall and critical (maximum) story drifts. Results illustrate that loose soils amplify seismic waves and increase building drifts and shear lag behavior.
文摘This article focuses on the study of the behavior of a soil mass under a plate subjected to a uniformly distributed load. The aim of this paper is to highlight the soil-structure interaction with a linear variation of the mechanical properties of the soil with the depth. The theory of plates and the soil-structure interaction has allowed reaching the general equation of the problem which depends on both the mechanical properties of the concrete and the subgrade. This study shows that the linearity of the elastic modulus of subgrade leads to larger displacements when this modulus is assumed to be constant in the soil mass. It also shows that the Poisson’s ratio of soil and mechanical properties of the concrete have an insignificant influence on the displacements. This analysis also shows that the points in the upper half-thickness of soil are the most sensitive to the parameters of the model.
文摘This paper is devoted to a new approach—the dynamic response of Soil-Structure System (SSS), the far field of which is discretized by decay or mapped elastodynamic infinite elements, based on scaling modified Bessel shape functions are to be calculated. These elements are appropriate for Soil-Structure Interaction problems, solved in time or frequency domain and can be treated as a new form of the recently proposed elastodynamic infinite elements with united shape functions (EIEUSF) infinite elements. Here the time domain form of the equations of motion is demonstrated and used in the numerical example. In the paper only the formulation of 2D horizontal type infinite elements (HIE) is used, but by similar techniques 2D vertical (VIE) and 2D corner (CIE) infinite elements can also be added. Continuity along the artificial boundary (the line between finite and infinite elements) is discussed as well and the application of the proposed elastodynamical infinite elements in the Finite element method is explained in brief. A numerical example shows the computational efficiency and accuracy of the proposed infinite elements, based on scaling Bessel shape functions.
基金funding support from the National Nature Science Foundation of China(Grant No.52022060)the Key Laboratory of Impact and Safety Engineering(Ningbo University).
文摘The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early contact and contact penetration can occur when the contact conditions are unsuitable,and(2)the method is not available for contact problems involving rigid-nonrigid materials,which can cause numerical instability.This study presents a new hybrid contact approach for the MPM to address these limitations to simulate the soil and structure interactions.The approach combines the advantages of point-point and point-segment contacts to implement contact detection,satisfying the impenetrability condition and smoothing the corner contact problem.The proposed approach is first validated through a disk test on an inclined slope.Then,several typical cases,such as granular collapse,bearing capacity,and deformation of a flexible retaining wall,are simulated to demonstrate the robustness of the proposed approach compared with FEM or analytical solutions.Finally,the proposed method is used to simulate the impact of sand flow on a deformable structure.The results show that the proposed contact approach can well describe the phenomenon of soil-structure interaction problems.
基金funded by the National Natural Science Foundation of China(No.51778282)the Science Research Foundations of Nanjing Institute of Technology(CKJA201505,JCYJ201618)
文摘To investigate the effect of soil-pile-structure interaction(SPSI effect)on the dynamic response of a baseisolated structure with buried footings on a pile foundation,certain shake table tests are previously conducted.Based on the test results and the existing related studies,an efficient simplified model and a corresponding calculation method are verified for estimating the dynamic characteristics of a base-isolated structure with buried footings on a pile foundation with the SSI effect.In this method,the solutions by Veletsos and co-workers for a non-isolated structure with the SSI effect are verified and advanced for a base-isolated structure,and the solutions by Maravas and co-workers for a non-isolated structure on a pile foundation are introduced to consider the effect of the piles.By comparison with the shake table test,this work proves that the simplified method can efficiently estimate the dynamic responses of a base-isolated structure with buried footings on a pile foundation.Using parameter analysis,this work also shows that the dynamic characteristics of a non-isolated structure are quite similar to those of the base-isolated structure when the soil foundation is sufficiently soft,which means that the isolation layer gradually loses its isolation function as the soil foundation softens.
基金supported by a National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.2021R1A2C2006631).
文摘The objective of the current study is to propose an expert system framework based on a supervised machine learning technique(MLT)to predict the seismic performance of low-to mid-rise frame structures considering soil-structure interaction(SSI).The methodology of the framework is based on examining different MLTs to obtain the highest possible accuracy for prediction.Within the MLT,a sensitivity analysis was conducted on the main SSI parameters to select the most effective input parameters.Multiple limit state criteria were used for the seismic evaluation within the process.A new global seismic assessment ratio was introduced that considers both serviceability and strength aspects by utilizing three different engineering demand parameters(EDPs).The proposed framework is novel because it enables the designer to seismically assess the structure,while simultaneously considering different EDPs and multiple limit states.Moreover,the framework provides recommendations for building component design based on the newly introduced global seismic assessment ratio,which considers different levels of seismic hazards.The proposed framework was validated through comparison using non-linear time history(NLTH)analysis.The results show that the proposed framework provides more accurate results than conventional methods.Finally,the generalization potential of the proposed framework was tested by investigating two different types of structural irregularities,namely,stiffness and mass irregularities.The results from the framework were in good agreement with the NLTH analysis results for the selected case studies,and peak ground acceleration(PGA)was found to be the most influential input parameter in the assessment process for the case study models investigated.The proposed framework shows high generalization potential for low-to mid-rise structures.