This article examines the influence of seawater temperature and total dissolved solids (TDS) on reverse osmosis (RO) desalination in the Arabian Gulf region, with a focus on the impact of climate change. The study hig...This article examines the influence of seawater temperature and total dissolved solids (TDS) on reverse osmosis (RO) desalination in the Arabian Gulf region, with a focus on the impact of climate change. The study highlights the changes in seawater temperature and TDS levels over the years and discusses their effects on the efficiency and productivity of RO desalination plants. It emphasizes the importance of monitoring TDS levels and controlling seawater temperature to optimize water production. The article also suggests various solutions, including intensive pre-treatment, development of high-performance membranes, exploration of alternative water sources, and regulation of discharges into the Gulf, to ensure sustainable water supply in the face of rising TDS levels and seawater temperature. Further research and comprehensive monitoring are recommended to understand the implications of these findings and develop effective strategies for the management of marine resources in the Arabian Gulf.展开更多
This study presents a significant contribution to the field of water quality assessment and sustainable water management practices. By evaluating the levels of total dissolved solids (TDS) in seawater intakes within A...This study presents a significant contribution to the field of water quality assessment and sustainable water management practices. By evaluating the levels of total dissolved solids (TDS) in seawater intakes within Al-Khobar desalination production system, the study addresses a crucial aspect of water treatment and environmental impact assessment. The findings provide valuable insights into the variations and trends of TDS levels across different phases of the system, highlighting the importance of monitoring and management strategies. The study provided both gravimetric total dissolved solids (TDS) and electrical conductivity (EC) measurements to analyze TDS calculation factor and evaluate measurement accuracy. Results revealed significant variations in TDS levels across the sampling locations, with phase-2 exhibiting higher levels and greater fluctuations. Phase-3 displayed similar trends but with lower TDS levels, while phase-4 showed slightly different behavior with higher average TDS levels. EC measurements demonstrated a strong correlation with TDS, providing a reliable estimation. However, additional methods such as gravimetric analysis should be employed to confirm TDS measurements. The findings contribute to understanding water quality in the Al-Khobar desalination system, aiding in monitoring, management, and decision-making processes for water treatment and environmental impact assessment. The study enhances the credibility of water quality assessments and supports sustainable water management practices.展开更多
Dynamic performance on solids flow with water in deviated tubing is essential for the reliability of pump and normal operation of horizontal and directional wells.Compared with coal-water flow in vertical tubing and s...Dynamic performance on solids flow with water in deviated tubing is essential for the reliability of pump and normal operation of horizontal and directional wells.Compared with coal-water flow in vertical tubing and sand-oil flow with high production in deviated tubing,solids deposition with water shows obvious non-symmetric distributions in deviated tubing from simulations and experiments.The mathematical model of two phase flow was developed under coupling conditions of deviated tubing,low flow rate and viscosity based on the kinetic theory of granular flow and first-order discrete scheme.The results show that solid-water stratified flow in deviated tubing can be divided into two zones of suspension bed and the moving bed throughout the flow field.The solid flowing velocity with water is negative and particles slide down at the bottom of moving bed zone.The process of solids flow with water in deviated tubing will produce pressure loss and consume the kinetic energy.The thickness of deposited layer and the flowing velocity of solids flow downward with water at the moving bed zone enhance with the decreased inlet flow rate and the increased particle size,tubing inside diameter(ID)and inclination angle.Solids are easier into suspension from the upper part of moving bed zone to suspension bed zone and more solid particles flow with water towards the tubing outlet with the increase of inlet flowing velocity.The decision is made to reduce the screen width,tubing ID and inclination angle to maintain to be greater than critical deposition velocity in order to prevent solids settling.And it provides the theoretical basis and technical reserves for solid control and offers an effective approach to enhance tubing cleaning in deviated strings.展开更多
Featuring low density and high specific strength, magnesium(Mg) alloys have attracted wide interests in the fields of portable devices and automotive industry. However, the active chemical and electrochemical properti...Featuring low density and high specific strength, magnesium(Mg) alloys have attracted wide interests in the fields of portable devices and automotive industry. However, the active chemical and electrochemical properties make them susceptible to corrosion in humid, seawater, soil,and chemical medium. Various strategies have revealed certain merits of protecting Mg alloys. Therein, engineering self-repairing coatings is considered as an effective strategy, because they can enable the timely repair for damaged areas, which brings about long-term protection for Mg alloys. In this review, self-repairing coatings on Mg alloys are summarized from two aspects, namely shape restoring coatings and function restoring coatings. Shape restoring coatings benefit for swelling, shrinking, or reassociating reversible chemical bonds to return to the original state and morphology when coatings broken;function self-repairing coatings depend on the release of inhibitors to generate new passive layers on the damaged areas. With the advancement of coating research and to fulfill the demanding requirements of applications, it is an inevitable trend to develop coatings that can integrate multiple functions(such as stimulus response, self-repairing, corrosion warning,and so on). As a novel carrier and barrier, porous solids, especially covalent organic frameworks(COFs), have been respected as the future development of self-repairing coatings on Mg alloys, due to their unique, diverse structures and adjustable functions.展开更多
In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment du...In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment during three periods of the aquaculture of the Litopenaeus vannamei:nursery(0–26 d),middle(27–57 d),and later(57–104 d).The variation of several water parameters during the dissolution of total suspended solid(TSS)in tailwater,applied with the effects of ozone on the microorganism and water quality parameters were investigated.Results showed that the TSS concentrations in tailwater decreased with time,although not significantly(P>0.05),whereas total ammonia nitrogen(TAN),nitrite(NO-2-N),and nitrate(NO_(3)^(-)-N)increased significantly(P<0.05).Therefore,TSS should be removed from the tailwater as early as possible,being most optimal within 4 h.Ozone removed 38.24%–48.95%of TSS,17.78%–90.14%of TAN,and 87.50%–98.90%of NO-2-N after 4 h of treatment.However,it resulted in the significant accumulation of NO_(3)^(-)-N.Moreover,the total number of Vibrio and bacterial counts in aquaculture tailwater was reduced completely by ozone within 4 h.Thus,these results provided technical details and data support for the effective treatment of tailwater from shrimp RAS.展开更多
Recent advances in high-pressure technologies and large-scale experimental and computational facilities have enabled scientists,at an unprecedented rate,to discover and predict novel states and materials under the ext...Recent advances in high-pressure technologies and large-scale experimental and computational facilities have enabled scientists,at an unprecedented rate,to discover and predict novel states and materials under the extreme pressure-temperature conditions found in deep,giant-planet interiors.Based on a well-documented body of work in this field of high-pressure research,we elucidate the fundamental principles that govern the chemistry of dense solids under extreme conditions.These include:(i)the pressure-induced evolution of chemical bonding and structure of molecular solids to extended covalent solids,ionic solids and,ultimately,metallic solids,as pressure increases to the terapascal regime;(ii)novel properties and complex transition mechanisms,arising from the subtle balance between electron hybridization(bonding)and electrostatic interaction(packing)in densely packed solids;and(iii)new dense framework solids with high energy densities,and with tunable properties and stabilities under ambient conditions.Examples are taken primarily fromlow-Z molecular systems that have scientific implications for giant-planet models,condensed materials physics,and solid-state core-electron chemistry.展开更多
A macro slip theory is presented in this paper.Four independent slip systems are proposed forpolycrystalline solids.Each slip system consists of a slip plane which lies on a face of the octahedron in stressspace and a...A macro slip theory is presented in this paper.Four independent slip systems are proposed forpolycrystalline solids.Each slip system consists of a slip plane which lies on a face of the octahedron in stressspace and a slip direction which is coincident with shear stress acting on the same face of the octahedron.Itis proved that for proportional loading,present results are identical with the classical flow theory of plasticity.For nonproportional loading,the macro slip theory shows good predicting ability.The calculated results arein good agreement with the experimental data.展开更多
We propose an experimental approach to directly detect the acoustic radiation induced static component(SC)of primary longitudinal(L)wave propagation in solids using an ultrasonic pitch-catch technique,where a lowfrequ...We propose an experimental approach to directly detect the acoustic radiation induced static component(SC)of primary longitudinal(L)wave propagation in solids using an ultrasonic pitch-catch technique,where a lowfrequency ultrasonic transducer is used to detect the SC generated by the co-propagating primary L-wave tone burst that is excited by a high-frequency ultrasonic transducer.Essentially,the experimental approach proposed uses a dynamic method to detect the SC generated.The basic requirement is that the central frequency of the low-frequency ultrasonic transducer needs to be near the center of the main lobe frequency range of the time-domain envelope of the primary L-wave tone burst.Under this condition,the main lobe of the frequency spectrum of the SC pulse generated adequately overlaps with that of the low-frequency ultrasonic transducer.This will enable the generated SC pulse to be directly detected by the low-frequency ultrasonic transducer.The performed experimental examination validates the feasibility and effectiveness of the proposed approach for direct detection of the acoustic radiation induced SC generated by L-wave propagation in solids.展开更多
This paper presents the performance results of a 366-day pilot-scale submerged membrane bioreactor (SMBR) for treating high-strength pharmaceutical wastewater. The study focuses on the growth properties of mixed liquo...This paper presents the performance results of a 366-day pilot-scale submerged membrane bioreactor (SMBR) for treating high-strength pharmaceutical wastewater. The study focuses on the growth properties of mixed liquor suspended solids (MLSS) in SMBR operated at high volumetric loading rates. The influences of MLSS on COD removal,sludge yield,oxygen utilization rates and sludge viscosity are studied. Results show that the bioreactor can be operated at higher volumetric loading rate with a low sludge yield. VSS/SS and observed sludge yield coefficient (Yo) present a decreasing trend with the decrease of hydraulic retention time (HRT) . Sludge oxygen utilization rate decreases with the increase of mixed liquor volatile suspended solids (MLVSS) . A mathematical model between sludge viscosity and MLSS is developed.展开更多
Crack tip fields are calculated under plane strain small scale yielding conditions. The material is characterized by a finite strain elastic–viscoplastic constitutive relation with various hardening–softening–harde...Crack tip fields are calculated under plane strain small scale yielding conditions. The material is characterized by a finite strain elastic–viscoplastic constitutive relation with various hardening–softening–hardening hardness functions. Both plastically compressible and plastically incompressible solids are considered. Displacements corresponding to the isotropic linear elastic mode I crack field are prescribed on a remote boundary. The initial crack is taken to be a semi-circular notch and symmetry about the crack plane is imposed. Plastic compressibility is found to give an increased crack opening displacement for a given value of the applied loading. The plastic zone size and shape are found to depend on the plastic compressibility, but not much on whether material softening occurs near the crack tip.On the other hand, the near crack tip stress and deformation fields depend sensitively on whether or not material softening occurs. The combination of plastic compressibility and softening(or softening–hardening) has a particularly strong effect on the near crack tip stress and deformation fields.展开更多
In this paper, based on energy variational principles of elastic-plastic solids, the path-independent J-integral and its dualform in elastic-plastic solids with finite displacements are presented. Whose testification ...In this paper, based on energy variational principles of elastic-plastic solids, the path-independent J-integral and its dualform in elastic-plastic solids with finite displacements are presented. Whose testification is given there afler.展开更多
The architecture of the Great Pyramid at Giza is based on fascinating golden mean geometry. Recently the ratio of the in-sphere volume to the pyramid volume was calculated. One yields as result <em>R</em>&...The architecture of the Great Pyramid at Giza is based on fascinating golden mean geometry. Recently the ratio of the in-sphere volume to the pyramid volume was calculated. One yields as result <em>R</em><sub><em>V</em></sub> = π <span style="white-space:nowrap;"><span style="white-space:nowrap;">⋅</span></span> <em><em style="white-space:normal;">φ</em></em><sup>5</sup>, where <img src="Edit_83decbce-7252-44ed-a822-fef13e43fd2a.bmp" alt="" /> is the golden mean. It is important that the number <em>φ</em><sup>5</sup> is a fundamental constant of nature describing phase transition from microscopic to cosmic scale. In this contribution the relatively small volume ratio of the Great Pyramid was compared to that of selected convex polyhedral solids such as the <em>Platonic </em>solids respectively the face-rich truncated icosahedron (bucky ball) as one of <em>Archimedes</em>’ solids leading to effective filling of the polyhedron by its in-sphere and therefore the highest volume ratio of the selected examples. The smallest ratio was found for the Great Pyramid. A regression analysis delivers the highly reliable volume ratio relation <img src="Edit_79e766ce-5580-4ae0-a706-570e0f3f1bd8.bmp" alt="" />, where <em>nF</em> represents the number of polyhedron faces and b approximates the silver mean. For less-symmetrical solids with a unique axis (tetragonal pyramids) the in-sphere can be replaced by a biaxial ellipsoid of maximum volume to adjust the <em>R</em><sub><em>V</em></sub> relation more reliably.展开更多
The modern trend of increasing the number of pigs at production sites led to a noticeable surplus of manure. Separation of manure solids provides an avenue of their utility via thermochemical conversion techniques. Th...The modern trend of increasing the number of pigs at production sites led to a noticeable surplus of manure. Separation of manure solids provides an avenue of their utility via thermochemical conversion techniques. Therefore, the goal of this paper was to assess the physical and thermal properties of solid separated swine manure obtained from two different farms, i.e., farrowing, and growing-finishing, and to determine their pyrolysis kinetic parameters. Swine manure solids were dried and milled prior to assessing their properties. Differential and integral isoconversional methods (Friedman, and Flynn-Wall-Ozawa) were used to determine the apparent activation energy as a function of the conversion ratio. Significant differences were observed in the proximate, ultimate composition between both manure types. The higher heating value (HHV) for the manure solids from farrowing, and growing-finishing farms reached 16.6 MJ/kg and 19.4 MJ/kg, respectively. The apparent activation energy computed using Friedman and FWO methods increased with the increase in the degree of conversion. Between 10% and 40% degrees of conversion, the average activation energies, using Friedman method, were103 and 116 kJ/mol for the farrowing and growing-finishing manure solids, respectively. On the other hand, the same activation energies, calculated from FWO method, were 98 and 104 kJ/mol, for solid manure obtained from farrowing and growing-finishing farms, respectively. The findings in this study will assist in the effort to optimize thermochemical conversion processes to accommodate swine waste. This could, in turn, minimize swine production impacts on the surrounding ecologies and provide sustainable energy and biochar streams.展开更多
Water quality deterioration took place during infiltration process. Quality of the source water, climate conditions and amounts of added water are the major role players of the differentiation measures. Treated wastew...Water quality deterioration took place during infiltration process. Quality of the source water, climate conditions and amounts of added water are the major role players of the differentiation measures. Treated wastewater, rainwater and fresh groundwater were described within this study. It was found that the rainwater has an aggressive behavior with a high ability to dissolve soil salts. The amounts of Total Dissolved Solids (TDS) increase with infiltration process. Electrical conductivity (EC) increased by 600%. Plotting the fresh groundwater to the same conditions and experiment reflects the ability of this water to dissolve soil salts and increases the TDS by increasing the EC by a percentage of around 200%;while applying lower quality of water, the percentage of the EC of the treated wastewater increases to about 230% for the depth of 20 cm, which indicates the accumulation of the salts within this part of the soil, which leads to the deterioration of the soil quality, and decreases to about 160% for a depth of 60 cm. This differentiation could be a result of low permeability soils which tend to accumulate salts as a result of evaporation and then increase the salinity in the topsoil. Dissolution and plant uptake in the infiltrated take of minerals save the soil’s water from evaporation and do not allow salts to concentrate in soils. Moreover, plant uptake of soil water chemicals causes a decrease in some salt concentrations such as NO3, PO4, K, Na, and Cl and may conserve others.展开更多
The microwave enhanced advanced oxidation process (MW/H2O2-AOP) aided with dilute sulfuric acid was applied in a two-stage treatment of dairy manure for nutrient release, solids reduction, and reducing sugar productio...The microwave enhanced advanced oxidation process (MW/H2O2-AOP) aided with dilute sulfuric acid was applied in a two-stage treatment of dairy manure for nutrient release, solids reduction, and reducing sugar production. A much higher hydrogen peroxide dosage (1.2 g H2O2/g TS) was used in Stage 2 than that in Stage 1 (0.38 g H2O2/g TS). Most of the reducing sugar was produced in Stage 1, and only a small amount produced in Stage 2. The highest reducing sugar yield of 15.5% was obtained at 160℃, 0 mL H2O2/, and 20 min of heating time. With a high hydrogen peroxide dosage and a higher operating temperature of 160℃ in Stage 2, the nutrient release conversion rate was much higher in Stage 2 than Stage 1. All of total phosphorus was converted to orthophosphate, and a very high ammonia concentration was obtained in the treated solution. The results indicated that the MW/H2O2/-AOP operated under the reducing process (without hydrogen peroxide) provided the best yield of reducing sugar;however, when operated under an oxidative process (with hydrogen peroxide), it favoured nutrient release and solids disintegration. The concentration of total chemical oxidation demand (TCOD) in the treated solution decreased with an increase of temperature, hydrogen peroxide dosage and heating time. Soluble chemical oxidation demand (SCOD) concentration decreased with a very high hydrogen peroxide dosage. Volatile fatty acids (VFA) concentration decreased with an increase of hydrogen peroxide dosage. Ammonia and orthophosphate concentrations increased with an increase of temperature and hydrogen peroxide dosage.展开更多
In this paper,with the aid of superimposing technique and thePseudo Traction Method(PTM),the interaction problem between an interface macro-crack and parallel microcracks in the process zone in bimaterial anisotropic ...In this paper,with the aid of superimposing technique and thePseudo Traction Method(PTM),the interaction problem between an interface macro-crack and parallel microcracks in the process zone in bimaterial anisotropic solids isreduced to a system of integral equations.After the integral equations are solvednumerically,a conservation law among three kinds of J-integrals is obtained whichare induced from the interface macrocrack tip,the microcrack and the remote field,respectively.This conservation law reveals that the microcrack shielding effect insuch materials could be considered as the redistribution of the remote J-integral.展开更多
The lateral mixing of solids in a gas-solids fluidized bed is very complicated.It can be caused by:(a)bubble movement through the bed,(b)bubble burst at the bed surface,and(c)gross particle circulation in thebed.Howev...The lateral mixing of solids in a gas-solids fluidized bed is very complicated.It can be caused by:(a)bubble movement through the bed,(b)bubble burst at the bed surface,and(c)gross particle circulation in thebed.However,experiments show that the major factors effected the lateral mixing of solids are the bubblemovement through the bed and the bubble burst at the bed surface.Thus a model with two mixing re-gions,i.e.mixing in bubble rising region and mixing in bubble breaking region,was proposed.Based on thismodel,an equation for predicting the lateral dispersion coefficient of solids in gas-solids fluidized beds wasderived without any adjustable parameter.The calculated values by this equation are well comparable withthe observed data including the present work and the other investigations.展开更多
Radial profiles of solid concentration and velocity for concurrent downward gas-solid suspension in a140mm inside diameter fast fluidized bed were investigated.The influence of gas velocity,solid circulating rateand a...Radial profiles of solid concentration and velocity for concurrent downward gas-solid suspension in a140mm inside diameter fast fluidized bed were investigated.The influence of gas velocity,solid circulating rateand axial position on radial profiles of solid concentration and particle velocity has been examined.It hasbeen found that an annular region of high solid concentration exists at r/R=0.94.At both the center and wallregion,the solid concentration and the particle velocities are relatively low.The shape of radial solid con-centration profile curves is mainly dependent on the cross-section averaged voidage,and the shape of radialparticle velocity profile is mainly affected by the gas velocity and cross-section averaged voidage.Based on the radial profiles of solid concentration and particle velocity,the solid mass flux profile and thenonuniformity of solids flow are discussed in this paper.It is shown that solids flow in CDFFB is much moreuniform than that in UFFB.展开更多
This research aims at the generalization of the concept of anisotropy degree of linearlyelastic solids which has been defined and investigated in detail by Zhang[1988]to that ofnonlinear and non-elastic solids.The pro...This research aims at the generalization of the concept of anisotropy degree of linearlyelastic solids which has been defined and investigated in detail by Zhang[1988]to that ofnonlinear and non-elastic solids.The properties of the anisotropy degrees defined here showthat they are reasonable.展开更多
Non-aqueous extraction(NAE)of bitumen from oil sands has been gaining great attention from both the industry and academia as an alternative to the water-based extraction.A fine solids removal step is important for a N...Non-aqueous extraction(NAE)of bitumen from oil sands has been gaining great attention from both the industry and academia as an alternative to the water-based extraction.A fine solids removal step is important for a NAE process in order to obtain high-quality bitumen product,which,however,remains a great challenge to reduce the fine solids content to the desired level.Here,we introduce a strategy of destabilizing the bitumen-coated silica particles in toluene with the addition of water and biomolecules extracted from Cyamopsiste tragonolobuosr L.Taup.,i.e.,high molecular weight guar gum(HGG)and low molecular weight guar gum(LGG),respectively.By virtue of sedimentation tests and focused beam reflectance measurement analysis,we demonstrate that the introduced water droplets modified with these biomolecules can facilitate the settling of the solid particles in toluene although the underlying mechanisms differ between these two biomolecule cases.Specifically,in the case of LGG,the added water droplets with the interfacial amphiphilic LGG can strengthen the attachment of solid particles from bulk toluene to the LGG surface.This research work provides useful insight into the development of effective approaches for destabilization and removal of bitumen-coated fine solids from NAE bitumen.展开更多
文摘This article examines the influence of seawater temperature and total dissolved solids (TDS) on reverse osmosis (RO) desalination in the Arabian Gulf region, with a focus on the impact of climate change. The study highlights the changes in seawater temperature and TDS levels over the years and discusses their effects on the efficiency and productivity of RO desalination plants. It emphasizes the importance of monitoring TDS levels and controlling seawater temperature to optimize water production. The article also suggests various solutions, including intensive pre-treatment, development of high-performance membranes, exploration of alternative water sources, and regulation of discharges into the Gulf, to ensure sustainable water supply in the face of rising TDS levels and seawater temperature. Further research and comprehensive monitoring are recommended to understand the implications of these findings and develop effective strategies for the management of marine resources in the Arabian Gulf.
文摘This study presents a significant contribution to the field of water quality assessment and sustainable water management practices. By evaluating the levels of total dissolved solids (TDS) in seawater intakes within Al-Khobar desalination production system, the study addresses a crucial aspect of water treatment and environmental impact assessment. The findings provide valuable insights into the variations and trends of TDS levels across different phases of the system, highlighting the importance of monitoring and management strategies. The study provided both gravimetric total dissolved solids (TDS) and electrical conductivity (EC) measurements to analyze TDS calculation factor and evaluate measurement accuracy. Results revealed significant variations in TDS levels across the sampling locations, with phase-2 exhibiting higher levels and greater fluctuations. Phase-3 displayed similar trends but with lower TDS levels, while phase-4 showed slightly different behavior with higher average TDS levels. EC measurements demonstrated a strong correlation with TDS, providing a reliable estimation. However, additional methods such as gravimetric analysis should be employed to confirm TDS measurements. The findings contribute to understanding water quality in the Al-Khobar desalination system, aiding in monitoring, management, and decision-making processes for water treatment and environmental impact assessment. The study enhances the credibility of water quality assessments and supports sustainable water management practices.
基金funded by National Natural Science Foundation of China(Grant No.52074161)National Science and Technology Major Project of China(Grant No.2016ZX05065-001)+2 种基金Taishan Scholar Project of Shandong Province(Grant No.tsqn202211177)Shandong Provincial Plan for Introduction and Cultivation of Young Pioneers in Colleges and Universities(Grant No.2021-QingChuang-30613019)Natural Science Foundation of Shandong Province(Grant No.ZR2022ME173).
文摘Dynamic performance on solids flow with water in deviated tubing is essential for the reliability of pump and normal operation of horizontal and directional wells.Compared with coal-water flow in vertical tubing and sand-oil flow with high production in deviated tubing,solids deposition with water shows obvious non-symmetric distributions in deviated tubing from simulations and experiments.The mathematical model of two phase flow was developed under coupling conditions of deviated tubing,low flow rate and viscosity based on the kinetic theory of granular flow and first-order discrete scheme.The results show that solid-water stratified flow in deviated tubing can be divided into two zones of suspension bed and the moving bed throughout the flow field.The solid flowing velocity with water is negative and particles slide down at the bottom of moving bed zone.The process of solids flow with water in deviated tubing will produce pressure loss and consume the kinetic energy.The thickness of deposited layer and the flowing velocity of solids flow downward with water at the moving bed zone enhance with the decreased inlet flow rate and the increased particle size,tubing inside diameter(ID)and inclination angle.Solids are easier into suspension from the upper part of moving bed zone to suspension bed zone and more solid particles flow with water towards the tubing outlet with the increase of inlet flowing velocity.The decision is made to reduce the screen width,tubing ID and inclination angle to maintain to be greater than critical deposition velocity in order to prevent solids settling.And it provides the theoretical basis and technical reserves for solid control and offers an effective approach to enhance tubing cleaning in deviated strings.
基金the financial support from the National Natural Science Foundation of China (Nos.52204389,U19A2084 and 52234009)the National Key Research and Development Program (No.2022YFE0122000)Program for the Central University Youth Innovation Team。
文摘Featuring low density and high specific strength, magnesium(Mg) alloys have attracted wide interests in the fields of portable devices and automotive industry. However, the active chemical and electrochemical properties make them susceptible to corrosion in humid, seawater, soil,and chemical medium. Various strategies have revealed certain merits of protecting Mg alloys. Therein, engineering self-repairing coatings is considered as an effective strategy, because they can enable the timely repair for damaged areas, which brings about long-term protection for Mg alloys. In this review, self-repairing coatings on Mg alloys are summarized from two aspects, namely shape restoring coatings and function restoring coatings. Shape restoring coatings benefit for swelling, shrinking, or reassociating reversible chemical bonds to return to the original state and morphology when coatings broken;function self-repairing coatings depend on the release of inhibitors to generate new passive layers on the damaged areas. With the advancement of coating research and to fulfill the demanding requirements of applications, it is an inevitable trend to develop coatings that can integrate multiple functions(such as stimulus response, self-repairing, corrosion warning,and so on). As a novel carrier and barrier, porous solids, especially covalent organic frameworks(COFs), have been respected as the future development of self-repairing coatings on Mg alloys, due to their unique, diverse structures and adjustable functions.
基金Supported by the National Key R&D Program of China(No.2019YFD0900502)。
文摘In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment during three periods of the aquaculture of the Litopenaeus vannamei:nursery(0–26 d),middle(27–57 d),and later(57–104 d).The variation of several water parameters during the dissolution of total suspended solid(TSS)in tailwater,applied with the effects of ozone on the microorganism and water quality parameters were investigated.Results showed that the TSS concentrations in tailwater decreased with time,although not significantly(P>0.05),whereas total ammonia nitrogen(TAN),nitrite(NO-2-N),and nitrate(NO_(3)^(-)-N)increased significantly(P<0.05).Therefore,TSS should be removed from the tailwater as early as possible,being most optimal within 4 h.Ozone removed 38.24%–48.95%of TSS,17.78%–90.14%of TAN,and 87.50%–98.90%of NO-2-N after 4 h of treatment.However,it resulted in the significant accumulation of NO_(3)^(-)-N.Moreover,the total number of Vibrio and bacterial counts in aquaculture tailwater was reduced completely by ozone within 4 h.Thus,these results provided technical details and data support for the effective treatment of tailwater from shrimp RAS.
基金The present study has been performed in support of the NSF(Grant No.DMR 1701360),DOE-NNSA(Grant No.DENA0003342),ARO(Grant No.W911NF-17-1-0468),DARPA(Grant No.W31P4Q-12-1-0009),and ADD in Korea.
文摘Recent advances in high-pressure technologies and large-scale experimental and computational facilities have enabled scientists,at an unprecedented rate,to discover and predict novel states and materials under the extreme pressure-temperature conditions found in deep,giant-planet interiors.Based on a well-documented body of work in this field of high-pressure research,we elucidate the fundamental principles that govern the chemistry of dense solids under extreme conditions.These include:(i)the pressure-induced evolution of chemical bonding and structure of molecular solids to extended covalent solids,ionic solids and,ultimately,metallic solids,as pressure increases to the terapascal regime;(ii)novel properties and complex transition mechanisms,arising from the subtle balance between electron hybridization(bonding)and electrostatic interaction(packing)in densely packed solids;and(iii)new dense framework solids with high energy densities,and with tunable properties and stabilities under ambient conditions.Examples are taken primarily fromlow-Z molecular systems that have scientific implications for giant-planet models,condensed materials physics,and solid-state core-electron chemistry.
基金The project supported by Chinese Academy of Sciences
文摘A macro slip theory is presented in this paper.Four independent slip systems are proposed forpolycrystalline solids.Each slip system consists of a slip plane which lies on a face of the octahedron in stressspace and a slip direction which is coincident with shear stress acting on the same face of the octahedron.Itis proved that for proportional loading,present results are identical with the classical flow theory of plasticity.For nonproportional loading,the macro slip theory shows good predicting ability.The calculated results arein good agreement with the experimental data.
基金Supported by the National Natural Science Foundation of China(Grant No.11834008)。
文摘We propose an experimental approach to directly detect the acoustic radiation induced static component(SC)of primary longitudinal(L)wave propagation in solids using an ultrasonic pitch-catch technique,where a lowfrequency ultrasonic transducer is used to detect the SC generated by the co-propagating primary L-wave tone burst that is excited by a high-frequency ultrasonic transducer.Essentially,the experimental approach proposed uses a dynamic method to detect the SC generated.The basic requirement is that the central frequency of the low-frequency ultrasonic transducer needs to be near the center of the main lobe frequency range of the time-domain envelope of the primary L-wave tone burst.Under this condition,the main lobe of the frequency spectrum of the SC pulse generated adequately overlaps with that of the low-frequency ultrasonic transducer.This will enable the generated SC pulse to be directly detected by the low-frequency ultrasonic transducer.The performed experimental examination validates the feasibility and effectiveness of the proposed approach for direct detection of the acoustic radiation induced SC generated by L-wave propagation in solids.
基金Sponsored by the Natural Science Foundation of Heilongjiang Province(Grant No.e2007-04)
文摘This paper presents the performance results of a 366-day pilot-scale submerged membrane bioreactor (SMBR) for treating high-strength pharmaceutical wastewater. The study focuses on the growth properties of mixed liquor suspended solids (MLSS) in SMBR operated at high volumetric loading rates. The influences of MLSS on COD removal,sludge yield,oxygen utilization rates and sludge viscosity are studied. Results show that the bioreactor can be operated at higher volumetric loading rate with a low sludge yield. VSS/SS and observed sludge yield coefficient (Yo) present a decreasing trend with the decrease of hydraulic retention time (HRT) . Sludge oxygen utilization rate decreases with the increase of mixed liquor volatile suspended solids (MLVSS) . A mathematical model between sludge viscosity and MLSS is developed.
文摘Crack tip fields are calculated under plane strain small scale yielding conditions. The material is characterized by a finite strain elastic–viscoplastic constitutive relation with various hardening–softening–hardening hardness functions. Both plastically compressible and plastically incompressible solids are considered. Displacements corresponding to the isotropic linear elastic mode I crack field are prescribed on a remote boundary. The initial crack is taken to be a semi-circular notch and symmetry about the crack plane is imposed. Plastic compressibility is found to give an increased crack opening displacement for a given value of the applied loading. The plastic zone size and shape are found to depend on the plastic compressibility, but not much on whether material softening occurs near the crack tip.On the other hand, the near crack tip stress and deformation fields depend sensitively on whether or not material softening occurs. The combination of plastic compressibility and softening(or softening–hardening) has a particularly strong effect on the near crack tip stress and deformation fields.
文摘In this paper, based on energy variational principles of elastic-plastic solids, the path-independent J-integral and its dualform in elastic-plastic solids with finite displacements are presented. Whose testification is given there afler.
文摘The architecture of the Great Pyramid at Giza is based on fascinating golden mean geometry. Recently the ratio of the in-sphere volume to the pyramid volume was calculated. One yields as result <em>R</em><sub><em>V</em></sub> = π <span style="white-space:nowrap;"><span style="white-space:nowrap;">⋅</span></span> <em><em style="white-space:normal;">φ</em></em><sup>5</sup>, where <img src="Edit_83decbce-7252-44ed-a822-fef13e43fd2a.bmp" alt="" /> is the golden mean. It is important that the number <em>φ</em><sup>5</sup> is a fundamental constant of nature describing phase transition from microscopic to cosmic scale. In this contribution the relatively small volume ratio of the Great Pyramid was compared to that of selected convex polyhedral solids such as the <em>Platonic </em>solids respectively the face-rich truncated icosahedron (bucky ball) as one of <em>Archimedes</em>’ solids leading to effective filling of the polyhedron by its in-sphere and therefore the highest volume ratio of the selected examples. The smallest ratio was found for the Great Pyramid. A regression analysis delivers the highly reliable volume ratio relation <img src="Edit_79e766ce-5580-4ae0-a706-570e0f3f1bd8.bmp" alt="" />, where <em>nF</em> represents the number of polyhedron faces and b approximates the silver mean. For less-symmetrical solids with a unique axis (tetragonal pyramids) the in-sphere can be replaced by a biaxial ellipsoid of maximum volume to adjust the <em>R</em><sub><em>V</em></sub> relation more reliably.
文摘The modern trend of increasing the number of pigs at production sites led to a noticeable surplus of manure. Separation of manure solids provides an avenue of their utility via thermochemical conversion techniques. Therefore, the goal of this paper was to assess the physical and thermal properties of solid separated swine manure obtained from two different farms, i.e., farrowing, and growing-finishing, and to determine their pyrolysis kinetic parameters. Swine manure solids were dried and milled prior to assessing their properties. Differential and integral isoconversional methods (Friedman, and Flynn-Wall-Ozawa) were used to determine the apparent activation energy as a function of the conversion ratio. Significant differences were observed in the proximate, ultimate composition between both manure types. The higher heating value (HHV) for the manure solids from farrowing, and growing-finishing farms reached 16.6 MJ/kg and 19.4 MJ/kg, respectively. The apparent activation energy computed using Friedman and FWO methods increased with the increase in the degree of conversion. Between 10% and 40% degrees of conversion, the average activation energies, using Friedman method, were103 and 116 kJ/mol for the farrowing and growing-finishing manure solids, respectively. On the other hand, the same activation energies, calculated from FWO method, were 98 and 104 kJ/mol, for solid manure obtained from farrowing and growing-finishing farms, respectively. The findings in this study will assist in the effort to optimize thermochemical conversion processes to accommodate swine waste. This could, in turn, minimize swine production impacts on the surrounding ecologies and provide sustainable energy and biochar streams.
文摘Water quality deterioration took place during infiltration process. Quality of the source water, climate conditions and amounts of added water are the major role players of the differentiation measures. Treated wastewater, rainwater and fresh groundwater were described within this study. It was found that the rainwater has an aggressive behavior with a high ability to dissolve soil salts. The amounts of Total Dissolved Solids (TDS) increase with infiltration process. Electrical conductivity (EC) increased by 600%. Plotting the fresh groundwater to the same conditions and experiment reflects the ability of this water to dissolve soil salts and increases the TDS by increasing the EC by a percentage of around 200%;while applying lower quality of water, the percentage of the EC of the treated wastewater increases to about 230% for the depth of 20 cm, which indicates the accumulation of the salts within this part of the soil, which leads to the deterioration of the soil quality, and decreases to about 160% for a depth of 60 cm. This differentiation could be a result of low permeability soils which tend to accumulate salts as a result of evaporation and then increase the salinity in the topsoil. Dissolution and plant uptake in the infiltrated take of minerals save the soil’s water from evaporation and do not allow salts to concentrate in soils. Moreover, plant uptake of soil water chemicals causes a decrease in some salt concentrations such as NO3, PO4, K, Na, and Cl and may conserve others.
文摘The microwave enhanced advanced oxidation process (MW/H2O2-AOP) aided with dilute sulfuric acid was applied in a two-stage treatment of dairy manure for nutrient release, solids reduction, and reducing sugar production. A much higher hydrogen peroxide dosage (1.2 g H2O2/g TS) was used in Stage 2 than that in Stage 1 (0.38 g H2O2/g TS). Most of the reducing sugar was produced in Stage 1, and only a small amount produced in Stage 2. The highest reducing sugar yield of 15.5% was obtained at 160℃, 0 mL H2O2/, and 20 min of heating time. With a high hydrogen peroxide dosage and a higher operating temperature of 160℃ in Stage 2, the nutrient release conversion rate was much higher in Stage 2 than Stage 1. All of total phosphorus was converted to orthophosphate, and a very high ammonia concentration was obtained in the treated solution. The results indicated that the MW/H2O2/-AOP operated under the reducing process (without hydrogen peroxide) provided the best yield of reducing sugar;however, when operated under an oxidative process (with hydrogen peroxide), it favoured nutrient release and solids disintegration. The concentration of total chemical oxidation demand (TCOD) in the treated solution decreased with an increase of temperature, hydrogen peroxide dosage and heating time. Soluble chemical oxidation demand (SCOD) concentration decreased with a very high hydrogen peroxide dosage. Volatile fatty acids (VFA) concentration decreased with an increase of hydrogen peroxide dosage. Ammonia and orthophosphate concentrations increased with an increase of temperature and hydrogen peroxide dosage.
基金The project supported by the National Natural Science Foundation of Chinathe Doctorate Foundation of Xi'an Jiaotong University
文摘In this paper,with the aid of superimposing technique and thePseudo Traction Method(PTM),the interaction problem between an interface macro-crack and parallel microcracks in the process zone in bimaterial anisotropic solids isreduced to a system of integral equations.After the integral equations are solvednumerically,a conservation law among three kinds of J-integrals is obtained whichare induced from the interface macrocrack tip,the microcrack and the remote field,respectively.This conservation law reveals that the microcrack shielding effect insuch materials could be considered as the redistribution of the remote J-integral.
基金Project Supported by National Natural Science Foundation of China.
文摘The lateral mixing of solids in a gas-solids fluidized bed is very complicated.It can be caused by:(a)bubble movement through the bed,(b)bubble burst at the bed surface,and(c)gross particle circulation in thebed.However,experiments show that the major factors effected the lateral mixing of solids are the bubblemovement through the bed and the bubble burst at the bed surface.Thus a model with two mixing re-gions,i.e.mixing in bubble rising region and mixing in bubble breaking region,was proposed.Based on thismodel,an equation for predicting the lateral dispersion coefficient of solids in gas-solids fluidized beds wasderived without any adjustable parameter.The calculated values by this equation are well comparable withthe observed data including the present work and the other investigations.
文摘Radial profiles of solid concentration and velocity for concurrent downward gas-solid suspension in a140mm inside diameter fast fluidized bed were investigated.The influence of gas velocity,solid circulating rateand axial position on radial profiles of solid concentration and particle velocity has been examined.It hasbeen found that an annular region of high solid concentration exists at r/R=0.94.At both the center and wallregion,the solid concentration and the particle velocities are relatively low.The shape of radial solid con-centration profile curves is mainly dependent on the cross-section averaged voidage,and the shape of radialparticle velocity profile is mainly affected by the gas velocity and cross-section averaged voidage.Based on the radial profiles of solid concentration and particle velocity,the solid mass flux profile and thenonuniformity of solids flow are discussed in this paper.It is shown that solids flow in CDFFB is much moreuniform than that in UFFB.
文摘This research aims at the generalization of the concept of anisotropy degree of linearlyelastic solids which has been defined and investigated in detail by Zhang[1988]to that ofnonlinear and non-elastic solids.The properties of the anisotropy degrees defined here showthat they are reasonable.
基金the financial support from Institute for Oil Sands Innovation(IOSI),Imperial Oil,the Natural Sciences and Engineering Research Council of Canada(NSERC)and Alberta Innovates to the research workthe financial support from the Canada Foundation for Innovation(CFI),the Future Energy Systems underthe Canada First Research Excellence Fund and the Canada Research Chairs Program。
文摘Non-aqueous extraction(NAE)of bitumen from oil sands has been gaining great attention from both the industry and academia as an alternative to the water-based extraction.A fine solids removal step is important for a NAE process in order to obtain high-quality bitumen product,which,however,remains a great challenge to reduce the fine solids content to the desired level.Here,we introduce a strategy of destabilizing the bitumen-coated silica particles in toluene with the addition of water and biomolecules extracted from Cyamopsiste tragonolobuosr L.Taup.,i.e.,high molecular weight guar gum(HGG)and low molecular weight guar gum(LGG),respectively.By virtue of sedimentation tests and focused beam reflectance measurement analysis,we demonstrate that the introduced water droplets modified with these biomolecules can facilitate the settling of the solid particles in toluene although the underlying mechanisms differ between these two biomolecule cases.Specifically,in the case of LGG,the added water droplets with the interfacial amphiphilic LGG can strengthen the attachment of solid particles from bulk toluene to the LGG surface.This research work provides useful insight into the development of effective approaches for destabilization and removal of bitumen-coated fine solids from NAE bitumen.
