In the proposed system for online inspection of steel balls, a diffuse illumination is developed to enhance defect appearances and produce high quality images. To fully view the entire sphere, a novel unfolding method...In the proposed system for online inspection of steel balls, a diffuse illumination is developed to enhance defect appearances and produce high quality images. To fully view the entire sphere, a novel unfolding method is put forward based on geometrical analysis, which only requires one-dimensional movement of the balls and a pair of cameras to capture images from different directions. Moreover, a realtime inspection algorithm is customized to improve both accuracy and efficiency. The precision and recall of the sample set were 87.7% and 98%, respectively. The average time cost on image processing and analysis for a steel ball was 47 ms, and the total time cost was less than 200 ms plus the cost of image acquisition and balls' movement. The system can sort 18 000 balls per hour with a spatial resolution higher than 0.01 mm.展开更多
A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing fai...A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing failure. The high efficient and precision detections for the surface flaws of steel ball can be conducted by the presented method, including spot, abrasion, burn, scratch and crack, etc. The design of main components of the detecting system is described in detail including automatic feeding mechanism, automatic spreading mechanism of steel ball's surface, optical system of microscope, image acquisition system, image processing system. The whole automatic system is controlled by an industrial control computer, which can carry out the recognition of flaws of steel ball's surface effectively.展开更多
Rest potentials for the steel ball electrode and the pyrite electrode as well as the combination potentials and the galvanic currents developed in the pyrite steel ball couple were measured. The data demonstrate that ...Rest potentials for the steel ball electrode and the pyrite electrode as well as the combination potentials and the galvanic currents developed in the pyrite steel ball couple were measured. The data demonstrate that the galvanic couples are going to form between the pyrite particles and the steel balls when they contact with each other. The initial combination potential and the initial galvanic current of the pyrite ball couple while bubbling with oxygen are greater than those in aeration of air. The combination potential and the galvanic current decrease more quickly with time while bubbling with oxygen than they do in aeration of air. In an experiment of simulating wear differences, a galvanic current, which is smaller than that developed in the pyrite ball couple, exists between two different ball electrodes in wear degree on the surface of them. Under different grinding time conditions, the equivalent corrosion current density calculated from marked ball wear data by applying Faraday’s law correlates well with those estimated from polarization curves of pyrite and ball electrodes, and the former is always greater than the latter.展开更多
The role of pH, solid content, water chemistry and ore mineralogy on the galvanic interactions between chalcopyrite and pyrite and low alloy steel balls were investigated in the grinding of Sarcheshmeh porphyry copper...The role of pH, solid content, water chemistry and ore mineralogy on the galvanic interactions between chalcopyrite and pyrite and low alloy steel balls were investigated in the grinding of Sarcheshmeh porphyry copper sulfide ore. All these factors strongly affect the galvanic current between the minerals and the steel during the grinding process. The galvanic current density decreased as the solution pH and percent solids increased. In addition, changing the water in the ball mill from tap to distilled water reduced the galvanic current between the minerals and the balls. Potentiodynamic polarization curves showed that pyrite and chalcopyrite demonstrated typical active-passive-transpassive anodic behavior in the grinding of copper ore. However, the nature of their transitions from the active to the passive state differed. This behavior was not seen in the grinding of pure minerals. In addition, an EDTA extraction technique was employed to quantify the amount of oxidized iron in the mill discharge. The amount of extractable iron was influenced by the same experimental factors and in the same way as the galvanic current.展开更多
Power loss of Fe-3%Sigrain-oriented silicon steelwas measured after ballscribing with different spacing using a self-designed tool.Three different sections of power loss,including hysteresis loss,abnormalloss,and eddy...Power loss of Fe-3%Sigrain-oriented silicon steelwas measured after ballscribing with different spacing using a self-designed tool.Three different sections of power loss,including hysteresis loss,abnormalloss,and eddy current loss,were measured and calculated,respectively.The loss variation and ratio were analyzed based on the experimentaldata.At 1.0 T,hysteresis loss of tested steelwith scribing spacing of 8 mm descends by 8.2% compared to samples without scribing,which is similar to the totalloss variation,and abnormalloss descends by 16.8%.At 1.0 T,hysteresis loss ratio of the steelwith scribing spacing of 16 mm ascends from 55.7% to 57.9%,and eddy current loss increases from 17.4% to 24.1%,while abnormalloss descends from 26.9% to 23.7%.The experimentalresults show that the reduction of power loss after scribing is mainly due to decreasing of hysteresis loss and abnormalloss.展开更多
The effect of ball scribing on iron loss of conventional grain-oriented ( CGO) and high-permeability grain-oriented ( HGO) electrical steel was investigated. In this paper,ball scribing was achieved by self- designed ...The effect of ball scribing on iron loss of conventional grain-oriented ( CGO) and high-permeability grain-oriented ( HGO) electrical steel was investigated. In this paper,ball scribing was achieved by self- designed ball scribing instrument and a computer-controlled system capable of providing high accuracy and automatic measurements was developed for the magnetisation and measurement at high and low flux densities. The results showed that after ball scribing,iron loss of two types of steel ( C711 and H668 ) apparently decreases ( 5. 5% and 8. 2% respectively after 16mm scribing at 1. 2T) ,and at high and low flux densities, CGO and HGO electrical steel performs differently. Through the formation and development of free magnetic poles and secondary magnetic domains due to compressive stress,primary magnetic domain spacing of grain- oriented electrical steel becomes smaller,which reflects as a reduction of iron loss in the macroscopic magnetic properties. Through iron loss formula derivation,the effect of domain refinement on grain-oriented electrical steel was also interpreted.展开更多
The mechanical and chemical properties of CF8M were studied through experiments. An application of CF8M in valve body was analyzed by using finite element method(FEM) to evaluate the structural safety. An optimization...The mechanical and chemical properties of CF8M were studied through experiments. An application of CF8M in valve body was analyzed by using finite element method(FEM) to evaluate the structural safety. An optimization containing several variables based on the response surface method(RSM) was conducted to find the optimum dimension of the valve. The results show that using this process can save valve mass as well as the computational expense effectively.展开更多
The preparing method,rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied.The results show that when the low chromium semi-steel bar is forged from55mm to...The preparing method,rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied.The results show that when the low chromium semi-steel bar is forged from55mm to50mm,cross-rolled into grinding ball at 1 000-1 050℃,air cooled and tempered at 550℃for 2h,the best mechanical properties,especially the abrasive resistance under the action of hard abrasive,can be obtained.展开更多
The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination,...The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination, scanning electron microscopic examination and drop ball test. The results show that it can obtain extractive impact fracture resistance after proper heat treatment. More advantages were obtained for the ball worked in the condition of low-imp ductility act. The main reasons are the function of RE and the change in morphology of eutectic carbide network.展开更多
A stainless steel/10wt%TiC nanocomposite particles were prepared by high-energy ball-milling method using stainless steel, carbon and titanium as raw materials. The evolution of phase composition, microstructure and s...A stainless steel/10wt%TiC nanocomposite particles were prepared by high-energy ball-milling method using stainless steel, carbon and titanium as raw materials. The evolution of phase composition, microstructure and specific surface area of the stainless steel/TiC nanocomposite particles with increasing ball-milling time in the range of 0-100 h were investigated by XRD, SEM, TEM and BET techniques. The results showed that the stainless steel/TiC nano-composite particles were fabricated when the ball-milling time was longer than 20 h. However, the nanocomposite particles were soldered and agglomerated again when the ball-milling time was longer than 60 h. The microstructure of the composite particles transformed from lamellar structure to nanostructure during the repeated process of the cold welding and cracking. TEM image reveals clearly that the in-situ TiC nanoparticles with grain size of 3-8 nm are in the interior of the stainless steel/TiC nanocomposite particles obtained by ball-milling 100 h.展开更多
5 heats of GCr15 bearing steel of different sulfur contents ranging from 0.009-0.092% （wt.）were smelted. The role of sulfur in bearing steel and its effect on contact fatigue properties andfracture toughness K<su...5 heats of GCr15 bearing steel of different sulfur contents ranging from 0.009-0.092% （wt.）were smelted. The role of sulfur in bearing steel and its effect on contact fatigue properties andfracture toughness K<sub>IC</sub>Were studied. It was shown that as the sulfur content increases the sulfur content dissolved in the steelsubstrate remains unchanged. The best contact fatigue property appears at the sulfur content of0.045% （wt.）, and the influence of sulfur content on the fracture toughness of bearing steel is notobvious. Finally, the mechanism of the role of sulfur was investigated.展开更多
文摘In the proposed system for online inspection of steel balls, a diffuse illumination is developed to enhance defect appearances and produce high quality images. To fully view the entire sphere, a novel unfolding method is put forward based on geometrical analysis, which only requires one-dimensional movement of the balls and a pair of cameras to capture images from different directions. Moreover, a realtime inspection algorithm is customized to improve both accuracy and efficiency. The precision and recall of the sample set were 87.7% and 98%, respectively. The average time cost on image processing and analysis for a steel ball was 47 ms, and the total time cost was less than 200 ms plus the cost of image acquisition and balls' movement. The system can sort 18 000 balls per hour with a spatial resolution higher than 0.01 mm.
基金Sponsored by Technology Project Itemof Department of Education of Jilin Province (2006JYT02)
文摘A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing failure. The high efficient and precision detections for the surface flaws of steel ball can be conducted by the presented method, including spot, abrasion, burn, scratch and crack, etc. The design of main components of the detecting system is described in detail including automatic feeding mechanism, automatic spreading mechanism of steel ball's surface, optical system of microscope, image acquisition system, image processing system. The whole automatic system is controlled by an industrial control computer, which can carry out the recognition of flaws of steel ball's surface effectively.
文摘Rest potentials for the steel ball electrode and the pyrite electrode as well as the combination potentials and the galvanic currents developed in the pyrite steel ball couple were measured. The data demonstrate that the galvanic couples are going to form between the pyrite particles and the steel balls when they contact with each other. The initial combination potential and the initial galvanic current of the pyrite ball couple while bubbling with oxygen are greater than those in aeration of air. The combination potential and the galvanic current decrease more quickly with time while bubbling with oxygen than they do in aeration of air. In an experiment of simulating wear differences, a galvanic current, which is smaller than that developed in the pyrite ball couple, exists between two different ball electrodes in wear degree on the surface of them. Under different grinding time conditions, the equivalent corrosion current density calculated from marked ball wear data by applying Faraday’s law correlates well with those estimated from polarization curves of pyrite and ball electrodes, and the former is always greater than the latter.
文摘The role of pH, solid content, water chemistry and ore mineralogy on the galvanic interactions between chalcopyrite and pyrite and low alloy steel balls were investigated in the grinding of Sarcheshmeh porphyry copper sulfide ore. All these factors strongly affect the galvanic current between the minerals and the steel during the grinding process. The galvanic current density decreased as the solution pH and percent solids increased. In addition, changing the water in the ball mill from tap to distilled water reduced the galvanic current between the minerals and the balls. Potentiodynamic polarization curves showed that pyrite and chalcopyrite demonstrated typical active-passive-transpassive anodic behavior in the grinding of copper ore. However, the nature of their transitions from the active to the passive state differed. This behavior was not seen in the grinding of pure minerals. In addition, an EDTA extraction technique was employed to quantify the amount of oxidized iron in the mill discharge. The amount of extractable iron was influenced by the same experimental factors and in the same way as the galvanic current.
基金Funded by the National Natural Science Foundation of China(Nos.51174057 and 51404159)the National High Technology Research and Development Program(No.2012AA03A503)Research Fund for the Doctoral Program of Higher Education of China(No.20130042110040)
文摘Power loss of Fe-3%Sigrain-oriented silicon steelwas measured after ballscribing with different spacing using a self-designed tool.Three different sections of power loss,including hysteresis loss,abnormalloss,and eddy current loss,were measured and calculated,respectively.The loss variation and ratio were analyzed based on the experimentaldata.At 1.0 T,hysteresis loss of tested steelwith scribing spacing of 8 mm descends by 8.2% compared to samples without scribing,which is similar to the totalloss variation,and abnormalloss descends by 16.8%.At 1.0 T,hysteresis loss ratio of the steelwith scribing spacing of 16 mm ascends from 55.7% to 57.9%,and eddy current loss increases from 17.4% to 24.1%,while abnormalloss descends from 26.9% to 23.7%.The experimentalresults show that the reduction of power loss after scribing is mainly due to decreasing of hysteresis loss and abnormalloss.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 51174057 and 51274062)National High Technology Research and Development Program (Grant No. 2012AA03A503)
文摘The effect of ball scribing on iron loss of conventional grain-oriented ( CGO) and high-permeability grain-oriented ( HGO) electrical steel was investigated. In this paper,ball scribing was achieved by self- designed ball scribing instrument and a computer-controlled system capable of providing high accuracy and automatic measurements was developed for the magnetisation and measurement at high and low flux densities. The results showed that after ball scribing,iron loss of two types of steel ( C711 and H668 ) apparently decreases ( 5. 5% and 8. 2% respectively after 16mm scribing at 1. 2T) ,and at high and low flux densities, CGO and HGO electrical steel performs differently. Through the formation and development of free magnetic poles and secondary magnetic domains due to compressive stress,primary magnetic domain spacing of grain- oriented electrical steel becomes smaller,which reflects as a reduction of iron loss in the macroscopic magnetic properties. Through iron loss formula derivation,the effect of domain refinement on grain-oriented electrical steel was also interpreted.
基金supported by Technical Center for High-Performance Valves from the Regional Innovation Center(RIC) Program of the Ministry of Knowledge Economy (MKE),Korea
文摘The mechanical and chemical properties of CF8M were studied through experiments. An application of CF8M in valve body was analyzed by using finite element method(FEM) to evaluate the structural safety. An optimization containing several variables based on the response surface method(RSM) was conducted to find the optimum dimension of the valve. The results show that using this process can save valve mass as well as the computational expense effectively.
基金Item Sponsored by Guiding Program of Science and Technology Research of Hebei of China(94122123)
文摘The preparing method,rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied.The results show that when the low chromium semi-steel bar is forged from55mm to50mm,cross-rolled into grinding ball at 1 000-1 050℃,air cooled and tempered at 550℃for 2h,the best mechanical properties,especially the abrasive resistance under the action of hard abrasive,can be obtained.
文摘The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination, scanning electron microscopic examination and drop ball test. The results show that it can obtain extractive impact fracture resistance after proper heat treatment. More advantages were obtained for the ball worked in the condition of low-imp ductility act. The main reasons are the function of RE and the change in morphology of eutectic carbide network.
基金Funded by the Natural Science Foundation of Hubei Province (No2006ABA304)
文摘A stainless steel/10wt%TiC nanocomposite particles were prepared by high-energy ball-milling method using stainless steel, carbon and titanium as raw materials. The evolution of phase composition, microstructure and specific surface area of the stainless steel/TiC nanocomposite particles with increasing ball-milling time in the range of 0-100 h were investigated by XRD, SEM, TEM and BET techniques. The results showed that the stainless steel/TiC nano-composite particles were fabricated when the ball-milling time was longer than 20 h. However, the nanocomposite particles were soldered and agglomerated again when the ball-milling time was longer than 60 h. The microstructure of the composite particles transformed from lamellar structure to nanostructure during the repeated process of the cold welding and cracking. TEM image reveals clearly that the in-situ TiC nanoparticles with grain size of 3-8 nm are in the interior of the stainless steel/TiC nanocomposite particles obtained by ball-milling 100 h.
文摘5 heats of GCr15 bearing steel of different sulfur contents ranging from 0.009-0.092% （wt.）were smelted. The role of sulfur in bearing steel and its effect on contact fatigue properties andfracture toughness K<sub>IC</sub>Were studied. It was shown that as the sulfur content increases the sulfur content dissolved in the steelsubstrate remains unchanged. The best contact fatigue property appears at the sulfur content of0.045% （wt.）, and the influence of sulfur content on the fracture toughness of bearing steel is notobvious. Finally, the mechanism of the role of sulfur was investigated.
