Traditional feature-based image stitching techniques often encounter obstacles when dealing with images lackingunique attributes or suffering from quality degradation. The scarcity of annotated datasets in real-life s...Traditional feature-based image stitching techniques often encounter obstacles when dealing with images lackingunique attributes or suffering from quality degradation. The scarcity of annotated datasets in real-life scenesseverely undermines the reliability of supervised learning methods in image stitching. Furthermore, existing deeplearning architectures designed for image stitching are often too bulky to be deployed on mobile and peripheralcomputing devices. To address these challenges, this study proposes a novel unsupervised image stitching methodbased on the YOLOv8 (You Only Look Once version 8) framework that introduces deep homography networksand attentionmechanisms. Themethodology is partitioned into three distinct stages. The initial stage combines theattention mechanism with a pooling pyramid model to enhance the detection and recognition of compact objectsin images, the task of the deep homography networks module is to estimate the global homography of the inputimages consideringmultiple viewpoints. The second stage involves preliminary stitching of the masks generated inthe initial stage and further enhancement through weighted computation to eliminate common stitching artifacts.The final stage is characterized by adaptive reconstruction and careful refinement of the initial stitching results.Comprehensive experiments acrossmultiple datasets are executed tometiculously assess the proposed model. Ourmethod’s Peak Signal-to-Noise Ratio (PSNR) and Structure Similarity Index Measure (SSIM) improved by 10.6%and 6%. These experimental results confirm the efficacy and utility of the presented model in this paper.展开更多
Stitch density is one of the critical quality parameters of knit fabrics. This parameter is closely related to other physical quality parameters like fabric weight, fabric tightness factor, fiber types, blend ratio, y...Stitch density is one of the critical quality parameters of knit fabrics. This parameter is closely related to other physical quality parameters like fabric weight, fabric tightness factor, fiber types, blend ratio, yarn diameter and linear density, and fabric structure. Selecting stitch density (wales per inch, course per inch) is essential to getting the appropriate fabric weight and desired quality. Usually, no rules or assumptions exist to get the desired stitch density in the finished fabric stage. Fifteen types of blended knit fabrics were prepared to conduct the study. The varying percentages of cotton, polyester, and elastane are incorporated in the blends. Regression analysis and regression ANOVA tests were done to predict the stitch density of finished fabrics. A suitable regression equation is established to get the desired results. The study also found that the stitch density value in the finished stage fabric decreases by approximately 15% compared to the stitch density in the grey fabric stage. This study will help the fabric manufacturers get the finished fabric stitch density in advance by utilizing the grey fabric stitch density data set. The author expects this research to benefit the knitting and dyeing industry, new researchers, and advanced researchers.展开更多
Image/video stitching is a technology for solving the field of view(FOV)limitation of images/videos.It stitches multiple overlapping images/videos to generate a wide-FOV image/video,and has been used in various fields...Image/video stitching is a technology for solving the field of view(FOV)limitation of images/videos.It stitches multiple overlapping images/videos to generate a wide-FOV image/video,and has been used in various fields such as sports broadcasting,video surveillance,street view,and entertainment.This survey reviews image/video stitching algorithms,with a particular focus on those developed in recent years.Image stitching first calculates the corresponding relationships between multiple overlapping images,deforms and aligns the matched images,and then blends the aligned images to generate a wide-FOV image.A seamless method is always adopted to eliminate such potential flaws as ghosting and blurring caused by parallax or objects moving across the overlapping regions.Video stitching is the further extension of image stitching.It usually stitches selected frames of original videos to generate a stitching template by performing image stitching algorithms,and the subsequent frames can then be stitched according to the template.Video stitching is more complicated with moving objects or violent camera movement,because these factors introduce jitter,shakiness,ghosting,and blurring.Foreground detection technique is usually combined into stitching to eliminate ghosting and blurring,while video stabilization algorithms are adopted to solve the jitter and shakiness.This paper further discusses panoramic stitching as a special-extension of image/video stitching.Panoramic stitching is currently the most widely used application in stitching.This survey reviews the latest image/video stitching methods,and introduces the fundamental principles/advantages/weaknesses of image/video stitching algorithms.Image/video stitching faces long-term challenges such as wide baseline,large parallax,and low-texture problem in the overlapping region.New technologies may present new opportunities to address these issues,such as deep learning-based semantic correspondence,and 3D image stitching.Finally,this survey discusses the challenges of image/video stitching and proposes potential solutions.展开更多
Branch identification technology is a key technology to achieve automated pruning of fruit tree branches, and one of its technical bottlenecks lies in the stitching of branch images. To this end, we propose a set of b...Branch identification technology is a key technology to achieve automated pruning of fruit tree branches, and one of its technical bottlenecks lies in the stitching of branch images. To this end, we propose a set of branch image stitching technology algorithms. The algorithm is based on the grey-scale prime centroid method to determine the detection feature points, and uses the coordinate transformation matrix H of the corresponding points of the image to carry out the image geometric transformation, and realises the feature matching through sample comparison and classification methods. The experimental results show that the matched point images are more correct and less time-consuming.展开更多
A multi layer gridless area router is reported.Based on corner stitching,this router adopts tile expansion to explore path for each net.A heuristic method that penalizes nodes deviating from the destination is devise...A multi layer gridless area router is reported.Based on corner stitching,this router adopts tile expansion to explore path for each net.A heuristic method that penalizes nodes deviating from the destination is devised to accelerate the algorithm.Besides,an enhanced interval tree is used to manage the intermediate data structure.In order to improve the completion rate of routing,a new gridless rip up and rerouting algorithm is proposed.The experimental results indicate that the completion rate is improved after the rip up and reroute process and the speed of this algorithm is satisfactory.展开更多
According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total c...According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total curvature energy, which is used to resolve the stitching problems existing during computer-aided design for dental restorations. First, the two boundaries corresponding to the lower and upper surfaces are triangulated based on the zipper working mechanism to generate the initial stitching surface patch, of which the edges are distributed uniformly between the boundaries. Secondly, the initial stitching surface patch is subdivided and deformed to reconstruct an optimized surface patch according to the bio-characteristics of the teeth. The optimized surface patch is minimally distinguishable from the surrounding mesh in smoothness and density, and it can stitch the upper and lower cavity surfaces naturally. The experimental results show that the dental restorations obtained by the proposed method can satisfy both the shape aesthetic and the fitting accuracy, and meet the requirements of clinical oral medicine.展开更多
It is essential to measure the stitch length of weft knitted fabric in a static environment for economy and improving productivity. The image inputted was dealt with the digital image processing techniques： the paper...It is essential to measure the stitch length of weft knitted fabric in a static environment for economy and improving productivity. The image inputted was dealt with the digital image processing techniques： the paper carried out the transformation of grey scale; then removed impurities with filtering; the characteristic of the stitch structure was abstracted by using the Fourier transform technique. To obtain the stitch length more accurately, we should establish ageometric medal of the stitch lined on the digital image processing, which provides a way to transform the stitch length in the two-dimenslon space into a three-dimension space. This study provides a new methed for measuring the stitch length without damaging the fabric.展开更多
Stitch welding of plate covered skeleton structure of Ti-6Al-4V titanium alloys has a variety of applications in aerospace vehicle manufacture. The laser stitch welding of Ti-6Al-4V titanium alloys was carried out by ...Stitch welding of plate covered skeleton structure of Ti-6Al-4V titanium alloys has a variety of applications in aerospace vehicle manufacture. The laser stitch welding of Ti-6Al-4V titanium alloys was carried out by a 4 kW ROFIN fiber laser. Influences of laser welding parameters on the macroscopic geometry, porosity, microstructure and mechanical properties of the stitch welded seams were investigated by digital microscope, optical microscope, scanning electron microscope and universal tensile testing machine. The results showed that the three-pipe nozzle with gas flow rate larger than 5 L/min could avoid oxidization, presenting better shielding effect in comparison with the single-pipe nozzle. Porosity formation could be suppressed with the gap between plate and skeleton less than 0.1 mm, while the existing porosity can be reduced with remelting. The maximum shear strength of stitch welding joint with minimal porosity was obtained by employing laser power of 1700 W, welding speed of 1.5 m/min and defocusing distance of ＋8 ram.展开更多
This contribution attempts to model the alteration of the in-plane elastic properties in laminates caused by stitching, and to predict the in-plane effective tensile strength of the stitched composite laminates. The d...This contribution attempts to model the alteration of the in-plane elastic properties in laminates caused by stitching, and to predict the in-plane effective tensile strength of the stitched composite laminates. The distortion of in-plane fibers is considered to be the main cause that affects the in-plane mechanical properties. A fiber distortion model is proposed to characterize the fiber misalignment and the fiber content concentration due to stitching. The undistorted region, the fiber distortion region, the resin-rich pocket and the through-thickness reinforcement section are taken into account. The fiber misalignment and inhomogeneous fiber content due to stitching have been formulated by introducing two parameters, the distortion width and maximum misalignment. It has been found that the ply stress concentration in stitched laminates is influenced by the two concurrent factors, the stitch hole and inhomogeneous fiber content. The stitch hole brings about the stress concentration whereas the higher fiber content at the local region induced by stitching restrains the local deformation of the composite. The model is used to predict the tensile strength of the [0/45/0/-45/90/45/0/-45]58 T300/QY9512 composite laminate stitched by Kevlar 29 yarn with different stitching configurations, showing an acceptable agreement with experimental data.展开更多
Stripes are artifacts in satellite images caused by various factors such as hardware defects. In some cases, these artifacts are introduced by some mitigating algorithms like Landsat SLC-off （Scan Line Corrector） ga...Stripes are artifacts in satellite images caused by various factors such as hardware defects. In some cases, these artifacts are introduced by some mitigating algorithms like Landsat SLC-off （Scan Line Corrector） gap-filling methods of LLHM （Local Linear Histogram Matching） and AWLHM （Adaptive Window Linear Histogram Matching）, which leave stripes as a byproduct. To improve Landsat SLC-off images with stripes,we propose an algorithm involving some hypothetical stripe-crossing stitch lines using the mean pixel value of the stitch lines.展开更多
AIM:To evaluate the efficacy and safety of one-stitch anastomosis through the skin with bicanalicular silicone tube intubation in repairing of bicanalicular laceration.METHODS:The clinical data of 15 consecutive patie...AIM:To evaluate the efficacy and safety of one-stitch anastomosis through the skin with bicanalicular silicone tube intubation in repairing of bicanalicular laceration.METHODS:The clinical data of 15 consecutive patients with both superior and inferior canalicular laceration in one eye who underwent surgical repair using one-stitch anastomosis through the skin and bicanalicular stent were retrospective studied.All the operations were performed under surgical microscope,5-0 silk sutures were used and were with bicanalicular silicone tube(diameter was 8mm) intubation,for one lacerated canaliculi one-stitch anastomosis through the skin.The stents were left in place for 3 months postoperatively and then removed.The follow-up period was 3-36 months(average 14 months). RESULTS:In 15 patients,13 patients were cured entirely,1 patient was meliorated,1 patient with no effects.All patients had got good recovery of eyelid laceration with no traumatic deformity in eyelid and canthus.Complication was seen in one case,for not followed the doctor’s guidance to come back to hospital to had the suture removed on the 7thday after operation,when he came at the 15thday,the inferior canalicular wall and eyelid skin were corroded by the suture caused 2mm wound,and the inside silicone tube was exposed,a promptly repair with 10-0 nylon suture was done,the wound healed in a week.There were no early tube protrusions and punctal slits in the patients.CONCLUSION:One-stitch anastomosis through the skin with bicanalicular silicone tube intubation is a good method in repair of bicanalicular laceration in one eye,the cut ends can be anastomosed directly,and with excellent cosmetic results,it is acceptable for the patients.For there is no suture remained in the wound permanently,so there is no suture-related granuloma which may cause obstruction or stenosis of canaliculi.It is simple,economical,effective and safe.展开更多
At present,underwater terrain images are all strip-shaped small fragment images preprocessed by the side-scan sonar imaging system.However,the processed underwater terrain images have inconspicuous and few feature poi...At present,underwater terrain images are all strip-shaped small fragment images preprocessed by the side-scan sonar imaging system.However,the processed underwater terrain images have inconspicuous and few feature points.In order to better realize the stitching of underwater terrain images and solve the problems of slow traditional image stitching speed,we proposed an improved algorithm for underwater terrain image stitching based on spatial gradient feature block.First,the spatial gradient fuzzy C-Means algorithm is used to divide the underwater terrain image into feature blocks with the fusion of spatial gradient information.The accelerated-KAZE(AKAZE)algorithm is used to combine the feature block information to match the reference image and the target image.Then,the random sample consensus(RANSAC)is applied to optimize the matching results.Finally,image fusion is performed with the global homography and the optimal seam-line method to improve the accuracy of image overlay fusion.The experimental results show that the proposed method in this paper effectively divides images into feature blocks by combining spatial information and gradient information,which not only solves the problem of stitching failure of underwater terrain images due to unobvious features,and further reduces the sensitivity to noise,but also effectively reduces the iterative calculation in the feature point matching process of the traditional method,and improves the stitching speed.Ghosting and shape warping are significantly eliminated by re-optimizing the overlap of the image.展开更多
BACKGROUND Laparoscopic cervical cerclage is performed for patients with abnormal cervical anatomy and/or transvaginal cervical cerclage failure.However,the method of removing the stitches to allow labour induction re...BACKGROUND Laparoscopic cervical cerclage is performed for patients with abnormal cervical anatomy and/or transvaginal cervical cerclage failure.However,the method of removing the stitches to allow labour induction remains controversial.According to published literature,stitches are removed through laparoscopic or transvaginal methods.Herein,we report,for the first time,a case of a patient who had undergone laparoscopic cerclage,and then underwent removal of stitches by laparotomy and labour induction in the third trimester of pregnancy.CASE SUMMARY A patient who underwent laparoscopic cervical cerclage due to cervical insufficiency became pregnant naturally following the operation.At 31 wk of pregnancy,severe foetal malformations were found.To successfully induce labour,cerclage stitches were removed via laparotomy,and rivanol was injected directly into the uterus.Following successful induction of labour,the patient delivered a dead foetus.CONCLUSION This report provides a reliable scheme of removing cerclage stitches for patients who have undergone laparoscopic cerclage but experience severe foetal malformations.展开更多
This paper presents a new method for simultaneously eliminating visual artifacts caused by moving objects and structure misalignment in image stitching. Given that the input images are roughly aligned, our approach is...This paper presents a new method for simultaneously eliminating visual artifacts caused by moving objects and structure misalignment in image stitching. Given that the input images are roughly aligned, our approach is implemented in two stages. In the first stage, we discover motions between input images, and then extract their corresponding regions through a multi-seed based region growing algorithm. In the second stage, with prior information provided by the extracted regions, we perform a graph cut optimization in gradient-domain to determine which pixels to use from each image to achieve seamless stitching. Our method is simple to implement and effective. The experimental results illustrate that the proposed approach can produce comparable or superior results in comparison with state-of-the-art methods.展开更多
The looper drive mechanism is a main moving part in the blind stitching machine, which is aspatial 5 bar RRRSR linkage. In this paper, a dynamic analysis of the looper drive mechanism is made by means of the ma-trix m...The looper drive mechanism is a main moving part in the blind stitching machine, which is aspatial 5 bar RRRSR linkage. In this paper, a dynamic analysis of the looper drive mechanism is made by means of the ma-trix method. Two methods are adopted in the calculation of the shaking force and shaking moment, one isdone by the constraint reaction of the flame-connected kinematic parts; the other is the inertialforces of all moving links.展开更多
The mechanical properties of silica material in the monolithic form are ;far from acceptable levels. In this paper, 3D stitched quartz preform was used for the fiber reinforcement, and quartz fibers- reinforced silica...The mechanical properties of silica material in the monolithic form are ;far from acceptable levels. In this paper, 3D stitched quartz preform was used for the fiber reinforcement, and quartz fibers- reinforced silica composites were prepared by the silica sol-infiltration-sintering method. The density of the composite was up to 1.71 g/cm3 after 10 infiltration-sintering cycles. The flexural strength and the in-plane shear strength were 61.7 MPa and 20.3 MPa, respectively. The flexural stress-deflection curve exhibited mostly nonlinear behavior, which was different from that of monolithic ceramics. Because of the existence of the fiber in Z axis direction, shearing property between the different layers of 3D stitched composites were greatly enhanced. Toughness effect of the 3D stitched quartz preform was conspicuous. The as-fabricated composites showed non-catastronhic failure behavior resulting from weak fiber/matrix interface.展开更多
Plain stitch embroidery of Han Dynasty and before is rarely unearthed. Among the large amount of embroidery excavated from Haiqu （海曲 ）Han tombs in Rizhao（ 日照）, Shundong, an embroidery fragment with plain stitc...Plain stitch embroidery of Han Dynasty and before is rarely unearthed. Among the large amount of embroidery excavated from Haiqu （海曲 ）Han tombs in Rizhao（ 日照）, Shundong, an embroidery fragment with plain stitch was found. This is the first plain stitch embroidery with a typical cloudy pattern in Hun Dynasty unearthed up to now. And its needlework was very skillful. Combining the two pieces of plain stitch embroidery on wool fabrics found in Wubao（ 五堡 ） tomb at Hami （ 哈密 ） Xinjiang and Mawangdui （ 马王堆 ） Han tombs, we recognized that the application of plain stitch was earlier than scholars considered before. As basic plain stitchwork was poorer in art expression than chain stitchwork, it was less adopted in extravagant silk embroidery. But for ordinary status, plain stitch was more popular to be used in embroidery.展开更多
Low-velocity impact damage known as“imperceptible”damage usually destroys the structural integrity of the material and seriously affects the service life of the materials.To improve the low-velocity impact resistanc...Low-velocity impact damage known as“imperceptible”damage usually destroys the structural integrity of the material and seriously affects the service life of the materials.To improve the low-velocity impact resistance of foam sandwich composites,an innovative concept of a stitched multi-layer sandwich structure by organically combining the discrete splitting of foam layer with full thickness stitching was proposed,and its low-velocity impact resistance obtained through drop-hammer impact tests was explored.The results showed that the multi-layer foam sandwich structure acted as a stress disperser and reduced the irreversible impact damage.The depth and area of low-velocity impact damage of multi-layer foam sandwich composites gradually decreased with increasing the number of the layers.The stitched structure would improve the integrity of the foam sandwich composites and inhibit the propagation of cracks.The maximum impact load of the stitched foam sandwich composite increased by approximately 5% compared with that of the non-stitched material.In addition,the low-velocity impact damage depth,damage area and absorbed energy of the stitched three-layer foam sandwich composite were reduced by 37.7%,34.6% and 20.7%,respectively,compared with those of the non-stitched single-layer sandwich material.展开更多
基金Science and Technology Research Project of the Henan Province(222102240014).
文摘Traditional feature-based image stitching techniques often encounter obstacles when dealing with images lackingunique attributes or suffering from quality degradation. The scarcity of annotated datasets in real-life scenesseverely undermines the reliability of supervised learning methods in image stitching. Furthermore, existing deeplearning architectures designed for image stitching are often too bulky to be deployed on mobile and peripheralcomputing devices. To address these challenges, this study proposes a novel unsupervised image stitching methodbased on the YOLOv8 (You Only Look Once version 8) framework that introduces deep homography networksand attentionmechanisms. Themethodology is partitioned into three distinct stages. The initial stage combines theattention mechanism with a pooling pyramid model to enhance the detection and recognition of compact objectsin images, the task of the deep homography networks module is to estimate the global homography of the inputimages consideringmultiple viewpoints. The second stage involves preliminary stitching of the masks generated inthe initial stage and further enhancement through weighted computation to eliminate common stitching artifacts.The final stage is characterized by adaptive reconstruction and careful refinement of the initial stitching results.Comprehensive experiments acrossmultiple datasets are executed tometiculously assess the proposed model. Ourmethod’s Peak Signal-to-Noise Ratio (PSNR) and Structure Similarity Index Measure (SSIM) improved by 10.6%and 6%. These experimental results confirm the efficacy and utility of the presented model in this paper.
文摘Stitch density is one of the critical quality parameters of knit fabrics. This parameter is closely related to other physical quality parameters like fabric weight, fabric tightness factor, fiber types, blend ratio, yarn diameter and linear density, and fabric structure. Selecting stitch density (wales per inch, course per inch) is essential to getting the appropriate fabric weight and desired quality. Usually, no rules or assumptions exist to get the desired stitch density in the finished fabric stage. Fifteen types of blended knit fabrics were prepared to conduct the study. The varying percentages of cotton, polyester, and elastane are incorporated in the blends. Regression analysis and regression ANOVA tests were done to predict the stitch density of finished fabrics. A suitable regression equation is established to get the desired results. The study also found that the stitch density value in the finished stage fabric decreases by approximately 15% compared to the stitch density in the grey fabric stage. This study will help the fabric manufacturers get the finished fabric stitch density in advance by utilizing the grey fabric stitch density data set. The author expects this research to benefit the knitting and dyeing industry, new researchers, and advanced researchers.
基金the National Natural Science Foundation of China(61872023).
文摘Image/video stitching is a technology for solving the field of view(FOV)limitation of images/videos.It stitches multiple overlapping images/videos to generate a wide-FOV image/video,and has been used in various fields such as sports broadcasting,video surveillance,street view,and entertainment.This survey reviews image/video stitching algorithms,with a particular focus on those developed in recent years.Image stitching first calculates the corresponding relationships between multiple overlapping images,deforms and aligns the matched images,and then blends the aligned images to generate a wide-FOV image.A seamless method is always adopted to eliminate such potential flaws as ghosting and blurring caused by parallax or objects moving across the overlapping regions.Video stitching is the further extension of image stitching.It usually stitches selected frames of original videos to generate a stitching template by performing image stitching algorithms,and the subsequent frames can then be stitched according to the template.Video stitching is more complicated with moving objects or violent camera movement,because these factors introduce jitter,shakiness,ghosting,and blurring.Foreground detection technique is usually combined into stitching to eliminate ghosting and blurring,while video stabilization algorithms are adopted to solve the jitter and shakiness.This paper further discusses panoramic stitching as a special-extension of image/video stitching.Panoramic stitching is currently the most widely used application in stitching.This survey reviews the latest image/video stitching methods,and introduces the fundamental principles/advantages/weaknesses of image/video stitching algorithms.Image/video stitching faces long-term challenges such as wide baseline,large parallax,and low-texture problem in the overlapping region.New technologies may present new opportunities to address these issues,such as deep learning-based semantic correspondence,and 3D image stitching.Finally,this survey discusses the challenges of image/video stitching and proposes potential solutions.
文摘Branch identification technology is a key technology to achieve automated pruning of fruit tree branches, and one of its technical bottlenecks lies in the stitching of branch images. To this end, we propose a set of branch image stitching technology algorithms. The algorithm is based on the grey-scale prime centroid method to determine the detection feature points, and uses the coordinate transformation matrix H of the corresponding points of the image to carry out the image geometric transformation, and realises the feature matching through sample comparison and classification methods. The experimental results show that the matched point images are more correct and less time-consuming.
文摘A multi layer gridless area router is reported.Based on corner stitching,this router adopts tile expansion to explore path for each net.A heuristic method that penalizes nodes deviating from the destination is devised to accelerate the algorithm.Besides,an enhanced interval tree is used to manage the intermediate data structure.In order to improve the completion rate of routing,a new gridless rip up and rerouting algorithm is proposed.The experimental results indicate that the completion rate is improved after the rip up and reroute process and the speed of this algorithm is satisfactory.
基金The National High Technology Research and Development Program of China(863 Program)(No.2005AA420240)the Key Science and Technology Program of Jiangsu Province (No.BE2005014)
文摘According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total curvature energy, which is used to resolve the stitching problems existing during computer-aided design for dental restorations. First, the two boundaries corresponding to the lower and upper surfaces are triangulated based on the zipper working mechanism to generate the initial stitching surface patch, of which the edges are distributed uniformly between the boundaries. Secondly, the initial stitching surface patch is subdivided and deformed to reconstruct an optimized surface patch according to the bio-characteristics of the teeth. The optimized surface patch is minimally distinguishable from the surrounding mesh in smoothness and density, and it can stitch the upper and lower cavity surfaces naturally. The experimental results show that the dental restorations obtained by the proposed method can satisfy both the shape aesthetic and the fitting accuracy, and meet the requirements of clinical oral medicine.
文摘It is essential to measure the stitch length of weft knitted fabric in a static environment for economy and improving productivity. The image inputted was dealt with the digital image processing techniques： the paper carried out the transformation of grey scale; then removed impurities with filtering; the characteristic of the stitch structure was abstracted by using the Fourier transform technique. To obtain the stitch length more accurately, we should establish ageometric medal of the stitch lined on the digital image processing, which provides a way to transform the stitch length in the two-dimenslon space into a three-dimension space. This study provides a new methed for measuring the stitch length without damaging the fabric.
基金Project(2012BAF08B02)supported by Key Project in the National Science and Technology Pillar Program During the Twelfth Five-year Plan Period,China
文摘Stitch welding of plate covered skeleton structure of Ti-6Al-4V titanium alloys has a variety of applications in aerospace vehicle manufacture. The laser stitch welding of Ti-6Al-4V titanium alloys was carried out by a 4 kW ROFIN fiber laser. Influences of laser welding parameters on the macroscopic geometry, porosity, microstructure and mechanical properties of the stitch welded seams were investigated by digital microscope, optical microscope, scanning electron microscope and universal tensile testing machine. The results showed that the three-pipe nozzle with gas flow rate larger than 5 L/min could avoid oxidization, presenting better shielding effect in comparison with the single-pipe nozzle. Porosity formation could be suppressed with the gap between plate and skeleton less than 0.1 mm, while the existing porosity can be reduced with remelting. The maximum shear strength of stitch welding joint with minimal porosity was obtained by employing laser power of 1700 W, welding speed of 1.5 m/min and defocusing distance of ＋8 ram.
基金Project supported by the Excellent Young Teachers Program of the Ministry of Education of Chinathe Shu-Guang Program of the City of Shanghai+1 种基金the National Natural Sciences Foundation of China(No.10372120)Shanghai Leading Academic Discipline Project(No.Y0103).
文摘This contribution attempts to model the alteration of the in-plane elastic properties in laminates caused by stitching, and to predict the in-plane effective tensile strength of the stitched composite laminates. The distortion of in-plane fibers is considered to be the main cause that affects the in-plane mechanical properties. A fiber distortion model is proposed to characterize the fiber misalignment and the fiber content concentration due to stitching. The undistorted region, the fiber distortion region, the resin-rich pocket and the through-thickness reinforcement section are taken into account. The fiber misalignment and inhomogeneous fiber content due to stitching have been formulated by introducing two parameters, the distortion width and maximum misalignment. It has been found that the ply stress concentration in stitched laminates is influenced by the two concurrent factors, the stitch hole and inhomogeneous fiber content. The stitch hole brings about the stress concentration whereas the higher fiber content at the local region induced by stitching restrains the local deformation of the composite. The model is used to predict the tensile strength of the [0/45/0/-45/90/45/0/-45]58 T300/QY9512 composite laminate stitched by Kevlar 29 yarn with different stitching configurations, showing an acceptable agreement with experimental data.
文摘Stripes are artifacts in satellite images caused by various factors such as hardware defects. In some cases, these artifacts are introduced by some mitigating algorithms like Landsat SLC-off （Scan Line Corrector） gap-filling methods of LLHM （Local Linear Histogram Matching） and AWLHM （Adaptive Window Linear Histogram Matching）, which leave stripes as a byproduct. To improve Landsat SLC-off images with stripes,we propose an algorithm involving some hypothetical stripe-crossing stitch lines using the mean pixel value of the stitch lines.
文摘AIM:To evaluate the efficacy and safety of one-stitch anastomosis through the skin with bicanalicular silicone tube intubation in repairing of bicanalicular laceration.METHODS:The clinical data of 15 consecutive patients with both superior and inferior canalicular laceration in one eye who underwent surgical repair using one-stitch anastomosis through the skin and bicanalicular stent were retrospective studied.All the operations were performed under surgical microscope,5-0 silk sutures were used and were with bicanalicular silicone tube(diameter was 8mm) intubation,for one lacerated canaliculi one-stitch anastomosis through the skin.The stents were left in place for 3 months postoperatively and then removed.The follow-up period was 3-36 months(average 14 months). RESULTS:In 15 patients,13 patients were cured entirely,1 patient was meliorated,1 patient with no effects.All patients had got good recovery of eyelid laceration with no traumatic deformity in eyelid and canthus.Complication was seen in one case,for not followed the doctor’s guidance to come back to hospital to had the suture removed on the 7thday after operation,when he came at the 15thday,the inferior canalicular wall and eyelid skin were corroded by the suture caused 2mm wound,and the inside silicone tube was exposed,a promptly repair with 10-0 nylon suture was done,the wound healed in a week.There were no early tube protrusions and punctal slits in the patients.CONCLUSION:One-stitch anastomosis through the skin with bicanalicular silicone tube intubation is a good method in repair of bicanalicular laceration in one eye,the cut ends can be anastomosed directly,and with excellent cosmetic results,it is acceptable for the patients.For there is no suture remained in the wound permanently,so there is no suture-related granuloma which may cause obstruction or stenosis of canaliculi.It is simple,economical,effective and safe.
基金This research was funded by College Student Innovation and Entrepreneurship Training Program,Grant Number 2021055Z and S202110082031the Special Project for Cultivating Scientific and Technological Innovation Ability of College and Middle School Students in Hebei Province,Grant Number 2021H011404.
文摘At present,underwater terrain images are all strip-shaped small fragment images preprocessed by the side-scan sonar imaging system.However,the processed underwater terrain images have inconspicuous and few feature points.In order to better realize the stitching of underwater terrain images and solve the problems of slow traditional image stitching speed,we proposed an improved algorithm for underwater terrain image stitching based on spatial gradient feature block.First,the spatial gradient fuzzy C-Means algorithm is used to divide the underwater terrain image into feature blocks with the fusion of spatial gradient information.The accelerated-KAZE(AKAZE)algorithm is used to combine the feature block information to match the reference image and the target image.Then,the random sample consensus(RANSAC)is applied to optimize the matching results.Finally,image fusion is performed with the global homography and the optimal seam-line method to improve the accuracy of image overlay fusion.The experimental results show that the proposed method in this paper effectively divides images into feature blocks by combining spatial information and gradient information,which not only solves the problem of stitching failure of underwater terrain images due to unobvious features,and further reduces the sensitivity to noise,but also effectively reduces the iterative calculation in the feature point matching process of the traditional method,and improves the stitching speed.Ghosting and shape warping are significantly eliminated by re-optimizing the overlap of the image.
文摘BACKGROUND Laparoscopic cervical cerclage is performed for patients with abnormal cervical anatomy and/or transvaginal cervical cerclage failure.However,the method of removing the stitches to allow labour induction remains controversial.According to published literature,stitches are removed through laparoscopic or transvaginal methods.Herein,we report,for the first time,a case of a patient who had undergone laparoscopic cerclage,and then underwent removal of stitches by laparotomy and labour induction in the third trimester of pregnancy.CASE SUMMARY A patient who underwent laparoscopic cervical cerclage due to cervical insufficiency became pregnant naturally following the operation.At 31 wk of pregnancy,severe foetal malformations were found.To successfully induce labour,cerclage stitches were removed via laparotomy,and rivanol was injected directly into the uterus.Following successful induction of labour,the patient delivered a dead foetus.CONCLUSION This report provides a reliable scheme of removing cerclage stitches for patients who have undergone laparoscopic cerclage but experience severe foetal malformations.
文摘This paper presents a new method for simultaneously eliminating visual artifacts caused by moving objects and structure misalignment in image stitching. Given that the input images are roughly aligned, our approach is implemented in two stages. In the first stage, we discover motions between input images, and then extract their corresponding regions through a multi-seed based region growing algorithm. In the second stage, with prior information provided by the extracted regions, we perform a graph cut optimization in gradient-domain to determine which pixels to use from each image to achieve seamless stitching. Our method is simple to implement and effective. The experimental results illustrate that the proposed approach can produce comparable or superior results in comparison with state-of-the-art methods.
文摘The looper drive mechanism is a main moving part in the blind stitching machine, which is aspatial 5 bar RRRSR linkage. In this paper, a dynamic analysis of the looper drive mechanism is made by means of the ma-trix method. Two methods are adopted in the calculation of the shaking force and shaking moment, one isdone by the constraint reaction of the flame-connected kinematic parts; the other is the inertialforces of all moving links.
文摘The mechanical properties of silica material in the monolithic form are ;far from acceptable levels. In this paper, 3D stitched quartz preform was used for the fiber reinforcement, and quartz fibers- reinforced silica composites were prepared by the silica sol-infiltration-sintering method. The density of the composite was up to 1.71 g/cm3 after 10 infiltration-sintering cycles. The flexural strength and the in-plane shear strength were 61.7 MPa and 20.3 MPa, respectively. The flexural stress-deflection curve exhibited mostly nonlinear behavior, which was different from that of monolithic ceramics. Because of the existence of the fiber in Z axis direction, shearing property between the different layers of 3D stitched composites were greatly enhanced. Toughness effect of the 3D stitched quartz preform was conspicuous. The as-fabricated composites showed non-catastronhic failure behavior resulting from weak fiber/matrix interface.
文摘Plain stitch embroidery of Han Dynasty and before is rarely unearthed. Among the large amount of embroidery excavated from Haiqu （海曲 ）Han tombs in Rizhao（ 日照）, Shundong, an embroidery fragment with plain stitch was found. This is the first plain stitch embroidery with a typical cloudy pattern in Hun Dynasty unearthed up to now. And its needlework was very skillful. Combining the two pieces of plain stitch embroidery on wool fabrics found in Wubao（ 五堡 ） tomb at Hami （ 哈密 ） Xinjiang and Mawangdui （ 马王堆 ） Han tombs, we recognized that the application of plain stitch was earlier than scholars considered before. As basic plain stitchwork was poorer in art expression than chain stitchwork, it was less adopted in extravagant silk embroidery. But for ordinary status, plain stitch was more popular to be used in embroidery.
文摘Low-velocity impact damage known as“imperceptible”damage usually destroys the structural integrity of the material and seriously affects the service life of the materials.To improve the low-velocity impact resistance of foam sandwich composites,an innovative concept of a stitched multi-layer sandwich structure by organically combining the discrete splitting of foam layer with full thickness stitching was proposed,and its low-velocity impact resistance obtained through drop-hammer impact tests was explored.The results showed that the multi-layer foam sandwich structure acted as a stress disperser and reduced the irreversible impact damage.The depth and area of low-velocity impact damage of multi-layer foam sandwich composites gradually decreased with increasing the number of the layers.The stitched structure would improve the integrity of the foam sandwich composites and inhibit the propagation of cracks.The maximum impact load of the stitched foam sandwich composite increased by approximately 5% compared with that of the non-stitched material.In addition,the low-velocity impact damage depth,damage area and absorbed energy of the stitched three-layer foam sandwich composite were reduced by 37.7%,34.6% and 20.7%,respectively,compared with those of the non-stitched single-layer sandwich material.
