Projectiles made of reactive structure materials(RSM)can damage the target with not only kinetic but also chemical energy,but the enhanced damage potential of RSM may become compromised if extreme loading condition di...Projectiles made of reactive structure materials(RSM)can damage the target with not only kinetic but also chemical energy,but the enhanced damage potential of RSM may become compromised if extreme loading condition disintegrates the projectile before the target is reached.In this work,a ductile coating of Ni was introduced to a tungsten-zirconium(W-Zr)alloy,a typical brittle RSM,to preserve the damage potential of the projectile.Detonation driving tests were carried out with X-ray photography and gunpowder deflagration driving tests were carried out with high-speed photography for the coated and uncoated RSM samples,respectively.The craters on the witness target were analyzed by scanning electron microscopy and X-ray diffraction.The Ni coating was found to effectively preserve the damage potential of the W-Zr alloy under extreme loading conditions,whereas the uncoated sample fractured and ignited before impacting the target in both detonation and deflagration driving.The crack propagation between the reactively brittle core and the ductile coating was analyzed based on the crack arrest theory to mechanistically demonstrate how the coating improves the structural integrity and preserves the damage potential of the projectile.Specifically,the Ni coating envelops theW-Zr core until the coated sphere penetrates the target,and the coating is then eroded and worn to release the reactive core for the projectile to damage the target more intensively.展开更多
Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely comme...Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.展开更多
Dielectric laser accelerators(DLAs)are considered promising candidates for on-chip particle accelerators that can achieve high acceleration gradients.This study explores various combinations of dielectric materials an...Dielectric laser accelerators(DLAs)are considered promising candidates for on-chip particle accelerators that can achieve high acceleration gradients.This study explores various combinations of dielectric materials and accelerated structures based on the inverse Cherenkov effect.The designs utilize conventional processing methods and laser parameters currently in use.We optimize the structural model to enhance the gradient of acceleration and the electron energy gain.To achieve higher acceleration gradients and energy gains,the selection of materials and structures should be based on the initial electron energy.Furthermore,we observed that the variation of the acceleration gradient of the material is different at different initial electron energies.These findings suggest that on-chip accelerators are feasible with the help of these structures and materials.展开更多
Aqueous zinc ion batteries(AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources,low cost, high safety, and environmental friendliness. Although the advanced elect...Aqueous zinc ion batteries(AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources,low cost, high safety, and environmental friendliness. Although the advanced electrochemical energy storage systems based on zinc ion batteries have been greatly developed, many severe problems associated with Zn anode impede its practical application, such as the dendrite formation,hydrogen evolution, corrosion and passivation phenomenon. To address these drawbacks, electrolytes, separators, zinc alloys, interfacial modification and structural design of Zn anode have been employed at present by scientists. Among them, the structural design for zinc anode is relatively mature, which is generally believed to enhance the electroactive surface area of zinc anode, reduce local current density, and promote the uniform distribution of zinc ions on the surface of anode. In order to explore new research directions, it is crucial to systematically summarize the structural design of anode materials. Herein, this review focuses on the challenges in Zn anode, modification strategies and the three-dimensional(3D) structure design of substrate materials for Zn anode including carbon substrate materials, metal substrate materials and other substrate materials. Finally, future directions and perspectives about the Zn anode are presented for developing high-performance AZIBs.展开更多
Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-elem...Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.展开更多
A new method is described to measure the dynamic shear modulus of underwater acoustic structure materials in a small anechoic water tank by using a broadband parametric source, a precise coordinate installation and te...A new method is described to measure the dynamic shear modulus of underwater acoustic structure materials in a small anechoic water tank by using a broadband parametric source, a precise coordinate installation and techniques of signal processing in the frequency range of 20 kHz - 100 kHz. The typical size of material samples is 500×500 mm2. Basic principles, experiment installation and measured results are also展开更多
The traditional information hiding methods embed the secret information by modifying the carrier,which will inevitably leave traces of modification on the carrier.In this way,it is hard to resist the detection of steg...The traditional information hiding methods embed the secret information by modifying the carrier,which will inevitably leave traces of modification on the carrier.In this way,it is hard to resist the detection of steganalysis algorithm.To address this problem,the concept of coverless information hiding was proposed.Coverless information hiding can effectively resist steganalysis algorithm,since it uses unmodified natural stego-carriers to represent and convey confidential information.However,the state-of-the-arts method has a low hidden capacity,which makes it less appealing.Because the pixel values of different regions of the molecular structure images of material(MSIM)are usually different,this paper proposes a novel coverless information hiding method based on MSIM,which utilizes the average value of sub-image’s pixels to represent the secret information,according to the mapping between pixel value intervals and secret information.In addition,we employ a pseudo-random label sequence that is used to determine the position of sub-images to improve the security of the method.And the histogram of the Bag of words model(BOW)is used to determine the number of subimages in the image that convey secret information.Moreover,to improve the retrieval efficiency,we built a multi-level inverted index structure.Furthermore,the proposed method can also be used for other natural images.Compared with the state-of-the-arts,experimental results and analysis manifest that our method has better performance in anti-steganalysis,security and capacity.展开更多
With the implementation of new-generation launch vehicles,space stations,lunar and deep space exploration,etc.,the development of spacecraft structures will face new challenges. In order to reduce the spacecraft weigh...With the implementation of new-generation launch vehicles,space stations,lunar and deep space exploration,etc.,the development of spacecraft structures will face new challenges. In order to reduce the spacecraft weight and increase the payload,composite material structures will be widely used. It is difficult to evaluate the strength and life of composite materials due to their complex mechanism and various phenomena in damage and failure.Meanwhile,the structures of composite materials used in spacecrafts will bear complex loads,including the coupling loads of tension,pressure,bending,shear,and torsion. Static loads,thermal loads,and vibration loads may occur at the same time,which asks for verification requirements to ensure the structure safety. Therefore,it is necessary to carry out a systematic multi-level experimental study. In this paper,the building block approach (BBA) is used to investigate the multilevel composite material structures for spacecrafts. The advanced measurement technology is adopted based on digital image correlation (DIC) and piezoelectric and optical fiber sensors to measure the composite material structure deformation. The virtual experiment technology is applied to provide sufficient and reliable data for the evaluation of the composite material structures of spacecrafts.展开更多
Internal diffusion of molecules in porous materials plays an important role in many chemical processes.However, the pore diffusion capacity of porous materials cannot be measured by conventional catalyst characterizat...Internal diffusion of molecules in porous materials plays an important role in many chemical processes.However, the pore diffusion capacity of porous materials cannot be measured by conventional catalyst characterization methods. In the present paper, a pore diffusion factor, the ratio of the diffusionconstriction factor to the pore tortuosity of the porous materials, was proposed to measure the diffusion ability of pores inside solid materials, and a method was proposed for measuring the diffusion factor using a well-defined and uniform pore size material as a reference. The diffusion factor was calculated based on the effective diffusion coefficients and the diffusion-constriction factor and pore tortuosity of the reference porous materials. The pore diffusion factor measurement can be performed at room temperature and atmospheric pressure. The pore diffusion factor of conventional porous materials was found to be much smaller than 1, indicating that there is a lot of room for improving the diffusion ability of the conventional catalysts and adsorbents, and could be significantly increased through adding small number of fibers into the conventional porous materials as template.展开更多
The application of an external field is a promising method to control the microstructure of materials, leading to their improved performance. In the present paper, the strengthening and toughening behavior of some typ...The application of an external field is a promising method to control the microstructure of materials, leading to their improved performance. In the present paper, the strengthening and toughening behavior of some typical high-performance structural materials subjected to multifield coupling treatment, including electrostatic field, electro-pulse current, thermal field, and stress field, are reviewed in detail. In addition to the general observation that the plasticity of materials could be increased by multi-external fields, strength enhancement can be achieved by controlling atomic diffusion or phase transformations. The paper is not limited to the strengthening and toughening mechanisms of the multifield coupling effects on different types of structural materials but is intended to provide a generic method to improve both the strength and ductility of the materials. Finally, the prospects of the applications of multi-external fields have also been proposed based on current works.展开更多
The geological condition of Chinese coal mines are complex and high gassy,which account for ffty percent to seventy percent.Because of the abundant pores and cracks around the drainage drilling hole,the gas concentrat...The geological condition of Chinese coal mines are complex and high gassy,which account for ffty percent to seventy percent.Because of the abundant pores and cracks around the drainage drilling hole,the gas concentration attenuates rapidly,and the effective gas drainage period is short.The traditional sealing materials of yellow mud and cement-sand grout will readily shrink after the drilling hole is sealed,the sealing length is short and the sealing quality is not satisfactory.Currently widely used polyurethane material will shrink when it comes into contact with water,and the price is also very high.In this study,taking cement as a base material,a novel composite sealing material mixed by expansion admixture,additive,and fbrin and coupling agent was developed and the sealing performance and expansion property of the material were also studied and analyzed.The FEI Quanta TM 250 environmental scanning electron microscope was used to investigate the microstructure of material.The results revealed that the new composite sealing material had a desirable expansion performance and a defnite fluidity convenient for grouting.The solidifed material,combining closely with the drilling wall,possessed an adequate strength and was not easy to shrink.Compared to the conventional polyurethane,the gas drainage concentration by drilling sealing exceeded 40 percent,and the sealing capacity improves5 times,the sealing effect increases signifcantly.展开更多
The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopo...The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.展开更多
We presented Mathematical apparatus of the choice of optimum parameters of technical, technological systems and materials on the basis of vector optimization. We have considered the formulation and solution of three t...We presented Mathematical apparatus of the choice of optimum parameters of technical, technological systems and materials on the basis of vector optimization. We have considered the formulation and solution of three types of tasks presented below. First, the problem of selecting the optimal parameters of technical systems depending on the functional characteristics of the system. Secondly, the problem of selecting the optimal parameters of the process depending on the technological characteristics of the process. Third, the problem of choosing the optimal structure of the material depending on the functional characteristics of this material. The statement of all problems is made in the form of vector problems of mathematical (nonlinear) programming. The theory and the principle of optimality of the solution of vector tasks it is explained in work of https://rdcu.be/bhZ8i. The implementation of the methodology is shown on a numerical example of the choice of optimum parameters of the technical, technological systems and materials. On the basis of mathematical methods of solution of vector problems we developed the software in the MATLAB system. The numerical example includes: input data (requirement specification) for modeling;transformation of mathematical models with uncertainty to the model under certainty;acceptance of an optimal solution with equivalent criteria (the solution of numerical model);acceptance of an optimal solution with the given priority of criterion.展开更多
The work refers to the foundations of the material world, in particular—to the field of quantum physics associated with the initial level—his fundamental physical constants and elementary particles. The study of the...The work refers to the foundations of the material world, in particular—to the field of quantum physics associated with the initial level—his fundamental physical constants and elementary particles. The study of the initial levels of structuring of this formation is necessary for a better understanding of the foundations of the structure Universe. Therefore, the solution of these problems is an urgent and important task, to which the works of many scientists of the world are devoted, from ancient times to the present. However, these tasks have not yet been fully resolved. Their solution is the main goal and scientific novelty of the work performed. For this, <strong>research methods</strong> were used based on the general principles of deduction and movement from simple initial systems to more complex ones, which are substantiated by reliable physical laws. <strong>The research results</strong> are the choice and substantiation of the initial (zero) level of the material world and a system of fundamental physical constants and physical quantities found on their basis, which precede the 1st level—elementary particles. The problems of determining the wave parameters of the gravitational field and the unified of gravitational and electromagnetic fields of the Universe were solved only as a result of the transition to the zero level of the material world.展开更多
The new view denies the existence of fundamental particles in matter, and instead states that any particle and matter is a dynamic superposition of three natural elements, motion, force, and emptiness. This paper prop...The new view denies the existence of fundamental particles in matter, and instead states that any particle and matter is a dynamic superposition of three natural elements, motion, force, and emptiness. This paper proposes a new theory of the structure of matter and the unification of the four forces. A correct understanding of the logic of material structure will enable atomic energy and nuclear physics to generate new manufacturing ideas. The dissertation expounds the natural distribution of dynamics and forces in space and the new deterministic theory of dynamic relationship. This theory solves problems such as the unity of the four forces and the dynamic laws of the material structure. In practical applications, it can provide new theoretical guidance for industrial manufacturing such as nuclear energy, fusion engineering, new energy, new materials, battery energy storage, new-generation reactors, etc., and then adopt effective means in line with the laws of natural power to make the substances needed by human beings. The supply of resources and energy is perfectly satisfied. Applying this theoretical model of material structure to all aspects of the manufacturing industry will surely open up a new era of material civilization for human beings.展开更多
The use of low structural materials can accentuate the characteristics of openness advocated by regional creation.Therefore,when selecting regional game materials,preschool teachers should focus on open and low struct...The use of low structural materials can accentuate the characteristics of openness advocated by regional creation.Therefore,when selecting regional game materials,preschool teachers should focus on open and low structures as well as actively and reasonably guide the child’s game behavior,so that each child can make full and efficient use of these materials.At the same time,in a harmonious dialogue with these materials,they are given the opportunity to express what they see,hear,feel,and think in their own ways.展开更多
With the development of ordnance technology,the survival and safety of individual combatants in hightech warfare are under serious threat,and the Personal Protective Equipment(PPE),as an important guarantee to reduce ...With the development of ordnance technology,the survival and safety of individual combatants in hightech warfare are under serious threat,and the Personal Protective Equipment(PPE),as an important guarantee to reduce casualties and maintain military combat effectiveness,is widely developed.This paper systematically reviewed various PPE based on individual combat through literature research and comprehensive discussion,and introduced in detail the latest application progress of PPE in terms of material and technology from three aspects:individual integrated protection system,traditional protection equipment,and intelligent protection equipment,respectively,and discussed in depth the functional improvement and optimization status brought by advanced technology for PPE,focusing on the achievements of individual equipment technology application.Finally,the problems and technical bottlenecks in the development of PPE were analyzed and summarized,and the development trend of PPE were pointed out.The results of the review will provide a forward-looking reference for the current development of individual PPE,and are important guidance for the design and technological innovation of advanced equipment based on the future technological battlefield.展开更多
Biological structural materials not only exhibit remarkable mechanical properties but also often embody dynamic characteristics such as environmental responsiveness,autonomy,and self-healing,which are difficult to ach...Biological structural materials not only exhibit remarkable mechanical properties but also often embody dynamic characteristics such as environmental responsiveness,autonomy,and self-healing,which are difficult to achieve in conventional engineering materials.By merging materials science,synthetic biology,and other disciplines,engineered living materials(ELMs)provide a promising solution to combine living organisms with abiotic components,thus facilitating the construction of functional“living”materials.Like natural materials,ELMs possess vitality and hold immense application potential in areas such as medicine,electronics,and construction,captivating increasing research attention recently.As an emerging branch of ELMs,structural ELMs aim to mimic living biological structural materials by achieving desired mechanical performance while maintaining important“living”characteristics.Here we summarize the recent progress and provide our perspectives for this emerging research area.We first summarize the superiority of structural ELMs by reviewing biological structural materials and biomimetic material design strategies.Subsequently,we provide a systematic discussion on the definition and classifications of structural ELMs,their mechanical performance,and physiological behaviors.Finally,we summarize some critical challenges faced by structural ELMs and highlight directions of future development.We hope this review article can provide a timely summary of the state of the art and relevant perspectives for future development of structural ELMs.展开更多
基金National Natural Science Foundation of China.Grant ID:11872123.
文摘Projectiles made of reactive structure materials(RSM)can damage the target with not only kinetic but also chemical energy,but the enhanced damage potential of RSM may become compromised if extreme loading condition disintegrates the projectile before the target is reached.In this work,a ductile coating of Ni was introduced to a tungsten-zirconium(W-Zr)alloy,a typical brittle RSM,to preserve the damage potential of the projectile.Detonation driving tests were carried out with X-ray photography and gunpowder deflagration driving tests were carried out with high-speed photography for the coated and uncoated RSM samples,respectively.The craters on the witness target were analyzed by scanning electron microscopy and X-ray diffraction.The Ni coating was found to effectively preserve the damage potential of the W-Zr alloy under extreme loading conditions,whereas the uncoated sample fractured and ignited before impacting the target in both detonation and deflagration driving.The crack propagation between the reactively brittle core and the ductile coating was analyzed based on the crack arrest theory to mechanistically demonstrate how the coating improves the structural integrity and preserves the damage potential of the projectile.Specifically,the Ni coating envelops theW-Zr core until the coated sphere penetrates the target,and the coating is then eroded and worn to release the reactive core for the projectile to damage the target more intensively.
基金This work was supported by the National Natural Science Foundation of China(52203066,51973157,61904123)the Tianjin Natural Science Foundation(18JCQNJC02900)+3 种基金the National innovation and entrepreneurship training program for college students(202310058007)the Tianjin Municipal college students’innovation and entrepreneurship training program(202310058088)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(Grant No.2018KJ196)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University.
文摘Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.
基金the National Natural Science Foundation of China(Grant No.11975214)。
文摘Dielectric laser accelerators(DLAs)are considered promising candidates for on-chip particle accelerators that can achieve high acceleration gradients.This study explores various combinations of dielectric materials and accelerated structures based on the inverse Cherenkov effect.The designs utilize conventional processing methods and laser parameters currently in use.We optimize the structural model to enhance the gradient of acceleration and the electron energy gain.To achieve higher acceleration gradients and energy gains,the selection of materials and structures should be based on the initial electron energy.Furthermore,we observed that the variation of the acceleration gradient of the material is different at different initial electron energies.These findings suggest that on-chip accelerators are feasible with the help of these structures and materials.
基金financially supported by the National Natural Science Foundation of China (Grants Nos. 52064013, 52064014, 52072323 and 52122211)the “Double-First Class” Foundation of Materials and Intelligent Manufacturing Discipline of Xiamen University。
文摘Aqueous zinc ion batteries(AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources,low cost, high safety, and environmental friendliness. Although the advanced electrochemical energy storage systems based on zinc ion batteries have been greatly developed, many severe problems associated with Zn anode impede its practical application, such as the dendrite formation,hydrogen evolution, corrosion and passivation phenomenon. To address these drawbacks, electrolytes, separators, zinc alloys, interfacial modification and structural design of Zn anode have been employed at present by scientists. Among them, the structural design for zinc anode is relatively mature, which is generally believed to enhance the electroactive surface area of zinc anode, reduce local current density, and promote the uniform distribution of zinc ions on the surface of anode. In order to explore new research directions, it is crucial to systematically summarize the structural design of anode materials. Herein, this review focuses on the challenges in Zn anode, modification strategies and the three-dimensional(3D) structure design of substrate materials for Zn anode including carbon substrate materials, metal substrate materials and other substrate materials. Finally, future directions and perspectives about the Zn anode are presented for developing high-performance AZIBs.
基金supported by the National Natural Science Foundation of China(Grant Nos.52171166,11972372 and U20A20231)supported by Sinoma Institute of Materials Research(Guang Zhou)Co.,Ltd。
文摘Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.
文摘A new method is described to measure the dynamic shear modulus of underwater acoustic structure materials in a small anechoic water tank by using a broadband parametric source, a precise coordinate installation and techniques of signal processing in the frequency range of 20 kHz - 100 kHz. The typical size of material samples is 500×500 mm2. Basic principles, experiment installation and measured results are also
基金This work is supported,in part,by the National Natural Science Foundation of China under grant numbers U1536206,U1405254,61772283,61602253,61672294,61502242in part,by the Jiangsu Basic Research Programs-Natural Science Foundation under grant numbers BK20150925 and BK20151530+1 种基金in part,by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)fundin part,by the Collaborative Innovation Center of Atmospheric Environment and Equipment Technology(CICAEET)fund,China.
文摘The traditional information hiding methods embed the secret information by modifying the carrier,which will inevitably leave traces of modification on the carrier.In this way,it is hard to resist the detection of steganalysis algorithm.To address this problem,the concept of coverless information hiding was proposed.Coverless information hiding can effectively resist steganalysis algorithm,since it uses unmodified natural stego-carriers to represent and convey confidential information.However,the state-of-the-arts method has a low hidden capacity,which makes it less appealing.Because the pixel values of different regions of the molecular structure images of material(MSIM)are usually different,this paper proposes a novel coverless information hiding method based on MSIM,which utilizes the average value of sub-image’s pixels to represent the secret information,according to the mapping between pixel value intervals and secret information.In addition,we employ a pseudo-random label sequence that is used to determine the position of sub-images to improve the security of the method.And the histogram of the Bag of words model(BOW)is used to determine the number of subimages in the image that convey secret information.Moreover,to improve the retrieval efficiency,we built a multi-level inverted index structure.Furthermore,the proposed method can also be used for other natural images.Compared with the state-of-the-arts,experimental results and analysis manifest that our method has better performance in anti-steganalysis,security and capacity.
文摘With the implementation of new-generation launch vehicles,space stations,lunar and deep space exploration,etc.,the development of spacecraft structures will face new challenges. In order to reduce the spacecraft weight and increase the payload,composite material structures will be widely used. It is difficult to evaluate the strength and life of composite materials due to their complex mechanism and various phenomena in damage and failure.Meanwhile,the structures of composite materials used in spacecrafts will bear complex loads,including the coupling loads of tension,pressure,bending,shear,and torsion. Static loads,thermal loads,and vibration loads may occur at the same time,which asks for verification requirements to ensure the structure safety. Therefore,it is necessary to carry out a systematic multi-level experimental study. In this paper,the building block approach (BBA) is used to investigate the multilevel composite material structures for spacecrafts. The advanced measurement technology is adopted based on digital image correlation (DIC) and piezoelectric and optical fiber sensors to measure the composite material structure deformation. The virtual experiment technology is applied to provide sufficient and reliable data for the evaluation of the composite material structures of spacecrafts.
基金supported by the National Nature Science Foundation of China (Grant No:91534120)。
文摘Internal diffusion of molecules in porous materials plays an important role in many chemical processes.However, the pore diffusion capacity of porous materials cannot be measured by conventional catalyst characterization methods. In the present paper, a pore diffusion factor, the ratio of the diffusionconstriction factor to the pore tortuosity of the porous materials, was proposed to measure the diffusion ability of pores inside solid materials, and a method was proposed for measuring the diffusion factor using a well-defined and uniform pore size material as a reference. The diffusion factor was calculated based on the effective diffusion coefficients and the diffusion-constriction factor and pore tortuosity of the reference porous materials. The pore diffusion factor measurement can be performed at room temperature and atmospheric pressure. The pore diffusion factor of conventional porous materials was found to be much smaller than 1, indicating that there is a lot of room for improving the diffusion ability of the conventional catalysts and adsorbents, and could be significantly increased through adding small number of fibers into the conventional porous materials as template.
基金financially supported by the National Natural Science Foundation of China (Nos. U1708253 and 51571052)the Major Technology Projects of Liaoning Province, China (No. 2019JH1/10100004)the Natural Science Foundation of Liaoning Province, China (No. 2019MS-122)。
文摘The application of an external field is a promising method to control the microstructure of materials, leading to their improved performance. In the present paper, the strengthening and toughening behavior of some typical high-performance structural materials subjected to multifield coupling treatment, including electrostatic field, electro-pulse current, thermal field, and stress field, are reviewed in detail. In addition to the general observation that the plasticity of materials could be increased by multi-external fields, strength enhancement can be achieved by controlling atomic diffusion or phase transformations. The paper is not limited to the strengthening and toughening mechanisms of the multifield coupling effects on different types of structural materials but is intended to provide a generic method to improve both the strength and ductility of the materials. Finally, the prospects of the applications of multi-external fields have also been proposed based on current works.
基金fnancially supported by the National Natural Science Foundation of China(No.51274195)the Natural Science Foundation of Jiangsu Province(No.BK2012571)+3 种基金the Program for New Century Excellent Talents in University(No.NCET-12-0959)the China Postdoctoral Science Foundation(No.20090450930)the National Basic Research Program of China(No.2011CB201205)Qing Lan Project,and the Youth Foundation of China University of Mining and Technology(No.2007A003)
文摘The geological condition of Chinese coal mines are complex and high gassy,which account for ffty percent to seventy percent.Because of the abundant pores and cracks around the drainage drilling hole,the gas concentration attenuates rapidly,and the effective gas drainage period is short.The traditional sealing materials of yellow mud and cement-sand grout will readily shrink after the drilling hole is sealed,the sealing length is short and the sealing quality is not satisfactory.Currently widely used polyurethane material will shrink when it comes into contact with water,and the price is also very high.In this study,taking cement as a base material,a novel composite sealing material mixed by expansion admixture,additive,and fbrin and coupling agent was developed and the sealing performance and expansion property of the material were also studied and analyzed.The FEI Quanta TM 250 environmental scanning electron microscope was used to investigate the microstructure of material.The results revealed that the new composite sealing material had a desirable expansion performance and a defnite fluidity convenient for grouting.The solidifed material,combining closely with the drilling wall,possessed an adequate strength and was not easy to shrink.Compared to the conventional polyurethane,the gas drainage concentration by drilling sealing exceeded 40 percent,and the sealing capacity improves5 times,the sealing effect increases signifcantly.
文摘The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.
文摘We presented Mathematical apparatus of the choice of optimum parameters of technical, technological systems and materials on the basis of vector optimization. We have considered the formulation and solution of three types of tasks presented below. First, the problem of selecting the optimal parameters of technical systems depending on the functional characteristics of the system. Secondly, the problem of selecting the optimal parameters of the process depending on the technological characteristics of the process. Third, the problem of choosing the optimal structure of the material depending on the functional characteristics of this material. The statement of all problems is made in the form of vector problems of mathematical (nonlinear) programming. The theory and the principle of optimality of the solution of vector tasks it is explained in work of https://rdcu.be/bhZ8i. The implementation of the methodology is shown on a numerical example of the choice of optimum parameters of the technical, technological systems and materials. On the basis of mathematical methods of solution of vector problems we developed the software in the MATLAB system. The numerical example includes: input data (requirement specification) for modeling;transformation of mathematical models with uncertainty to the model under certainty;acceptance of an optimal solution with equivalent criteria (the solution of numerical model);acceptance of an optimal solution with the given priority of criterion.
文摘The work refers to the foundations of the material world, in particular—to the field of quantum physics associated with the initial level—his fundamental physical constants and elementary particles. The study of the initial levels of structuring of this formation is necessary for a better understanding of the foundations of the structure Universe. Therefore, the solution of these problems is an urgent and important task, to which the works of many scientists of the world are devoted, from ancient times to the present. However, these tasks have not yet been fully resolved. Their solution is the main goal and scientific novelty of the work performed. For this, <strong>research methods</strong> were used based on the general principles of deduction and movement from simple initial systems to more complex ones, which are substantiated by reliable physical laws. <strong>The research results</strong> are the choice and substantiation of the initial (zero) level of the material world and a system of fundamental physical constants and physical quantities found on their basis, which precede the 1st level—elementary particles. The problems of determining the wave parameters of the gravitational field and the unified of gravitational and electromagnetic fields of the Universe were solved only as a result of the transition to the zero level of the material world.
文摘The new view denies the existence of fundamental particles in matter, and instead states that any particle and matter is a dynamic superposition of three natural elements, motion, force, and emptiness. This paper proposes a new theory of the structure of matter and the unification of the four forces. A correct understanding of the logic of material structure will enable atomic energy and nuclear physics to generate new manufacturing ideas. The dissertation expounds the natural distribution of dynamics and forces in space and the new deterministic theory of dynamic relationship. This theory solves problems such as the unity of the four forces and the dynamic laws of the material structure. In practical applications, it can provide new theoretical guidance for industrial manufacturing such as nuclear energy, fusion engineering, new energy, new materials, battery energy storage, new-generation reactors, etc., and then adopt effective means in line with the laws of natural power to make the substances needed by human beings. The supply of resources and energy is perfectly satisfied. Applying this theoretical model of material structure to all aspects of the manufacturing industry will surely open up a new era of material civilization for human beings.
文摘The use of low structural materials can accentuate the characteristics of openness advocated by regional creation.Therefore,when selecting regional game materials,preschool teachers should focus on open and low structures as well as actively and reasonably guide the child’s game behavior,so that each child can make full and efficient use of these materials.At the same time,in a harmonious dialogue with these materials,they are given the opportunity to express what they see,hear,feel,and think in their own ways.
基金supported by the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China(Projects No.52202012)the National Natural Science Foundation of China(Projects No.51834007)。
文摘With the development of ordnance technology,the survival and safety of individual combatants in hightech warfare are under serious threat,and the Personal Protective Equipment(PPE),as an important guarantee to reduce casualties and maintain military combat effectiveness,is widely developed.This paper systematically reviewed various PPE based on individual combat through literature research and comprehensive discussion,and introduced in detail the latest application progress of PPE in terms of material and technology from three aspects:individual integrated protection system,traditional protection equipment,and intelligent protection equipment,respectively,and discussed in depth the functional improvement and optimization status brought by advanced technology for PPE,focusing on the achievements of individual equipment technology application.Finally,the problems and technical bottlenecks in the development of PPE were analyzed and summarized,and the development trend of PPE were pointed out.The results of the review will provide a forward-looking reference for the current development of individual PPE,and are important guidance for the design and technological innovation of advanced equipment based on the future technological battlefield.
基金funding support from the National Science Foundation(No.DMR-1942865)the Air Force Office of Scientific Research(Nos.FA9550-19-1-0033 and FA9550-20-1-0161)Virginia Polytechnic Institute and State University for this work.
文摘Biological structural materials not only exhibit remarkable mechanical properties but also often embody dynamic characteristics such as environmental responsiveness,autonomy,and self-healing,which are difficult to achieve in conventional engineering materials.By merging materials science,synthetic biology,and other disciplines,engineered living materials(ELMs)provide a promising solution to combine living organisms with abiotic components,thus facilitating the construction of functional“living”materials.Like natural materials,ELMs possess vitality and hold immense application potential in areas such as medicine,electronics,and construction,captivating increasing research attention recently.As an emerging branch of ELMs,structural ELMs aim to mimic living biological structural materials by achieving desired mechanical performance while maintaining important“living”characteristics.Here we summarize the recent progress and provide our perspectives for this emerging research area.We first summarize the superiority of structural ELMs by reviewing biological structural materials and biomimetic material design strategies.Subsequently,we provide a systematic discussion on the definition and classifications of structural ELMs,their mechanical performance,and physiological behaviors.Finally,we summarize some critical challenges faced by structural ELMs and highlight directions of future development.We hope this review article can provide a timely summary of the state of the art and relevant perspectives for future development of structural ELMs.
