The work herein employed a rotating packed bed(RPB)to intensify the sulfonation process of 1,4-diaminoanthraquinone leuco(DL)in an attempt to improve the yield of the product 1,4-diaminoanthra quinone-2-sulfonic acid(...The work herein employed a rotating packed bed(RPB)to intensify the sulfonation process of 1,4-diaminoanthraquinone leuco(DL)in an attempt to improve the yield of the product 1,4-diaminoanthra quinone-2-sulfonic acid(DSA).First,the effects of operating conditions in a stirred tank reactor(STR),including stirring speed,chlorosulfonic acid/DL molar ratio(η),solvent/DL mass ratio(ζ),reaction temperature and dropping speed of chlorosulfonic acid,on the yield of DSA were investigated.The yield of DSA can reach 87.34%under the optimal operating conditions:stirring speed of 500 r·min^(-1),ηof 4.5,ζof 7,reaction temperature of 150℃,dropping speed of 0.61 ml·min^(-1).In addition,the kinetics of the sulfonation process via the shrinking core model revealed that the reaction is controlled by diffusion via a product layer under the reaction temperature of 140℃.Furthermore,the RPB was employed to intensify the mass transfer between liquid and solid phases during the sulfonation reaction process.The results showed that the DSA yield of 92.69%obtained by RPB was 5.35%higher than that by STR,indicating that RPB can significantly intensify the mass transfer in the liquid-solid phase sulfonation reaction process.展开更多
Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pr...Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.展开更多
Our previous work proved that high adsorption capacity and uptake rate of lysozyme were achieved on alginate(Alg)-grafted re sin with an ionic capacity(IC) of 240 mmol·L^(-1)(Alg-FF-240).Moreover,the salt-toleran...Our previous work proved that high adsorption capacity and uptake rate of lysozyme were achieved on alginate(Alg)-grafted re sin with an ionic capacity(IC) of 240 mmol·L^(-1)(Alg-FF-240).Moreover,the salt-tolerant feature of Alg-FF-230 was improved by using sequential alginate grafting and sulfonation strategy.Inspired by the enhanced adsorption performance of lysozyme,we have herein proposed to investigate the static and dynamic adsorption behaviors of γ-globulin on a series of Alg-grafted resins with different grafting densities and sulfonation degrees.The adsorption ca pacity of γ-globulin decreased with increa sing alginate-grafting density(IC) from 160 to 230 mmol·L^(-1) at 0 mmol·L^(-1) NaCl because of the steric hindrance caused by the alginate-grafting layer.Effects of ionic strength(IS) indicated that the adsorption capacities of the resins with the IC value of 230-370 mmol·L^(-1) were much higher than CM Sepharose FF at 50-100 mmol·L^(-1) NaCl,and the uptake rate of Alg-FF-230 was about twice as much as that of CM Sepharose FF.This work demonstrated the important effects of alginate-grafting layer and IS in γ-globulin adsorption behavior,which would be helpful in the design of Alggrafted resins and the selection of proper IS condition for protein purification.展开更多
This paper investigates the possibility of attaining sulphonated poly(phenylene oxide) (SPPO) with a relatively higher sulfonation degree. To achieve this aim, the approach we adopt is to improve the solubility of the...This paper investigates the possibility of attaining sulphonated poly(phenylene oxide) (SPPO) with a relatively higher sulfonation degree. To achieve this aim, the approach we adopt is to improve the solubility of the final product in the mixed solvent so that the sulfonation may take place between the bulk solutions and PPO powders even at higher sulfonation degree. It is shown that the addition of a proper amount of dimethyl formide (DMF) to the conventional PPO-chloroform system can actually enhance the sulfonation effect. The solvent composition is then correlated with the sulfonation degree based on the solubility parameters. It is interesting to find that solubility parameters between the mixed solvent and the precipitated products keep an approximately unchanged value at about 4.9, which is just equal to that when pure chloroform is used, though the solubility parameters of both solvents increase with the content of DMF in solution. This may be the main reason why the addition of DMF can reduce the precipitation and improve the ion exchange capacity (IEC) of SPPO polymer.展开更多
A novel polyetheretherketone (PEK-C) prepared from phenolphthalein has been synthesized. In order to improve some of its properties for application in high performance membrane, the PEK-C has been sulfonated with co...A novel polyetheretherketone (PEK-C) prepared from phenolphthalein has been synthesized. In order to improve some of its properties for application in high performance membrane, the PEK-C has been sulfonated with concentrated sulfuric acid. Degree of sulfonation can be regulated by controlling the temmperature and time of sulfonation. The characterization of the sulfonated PEK-C in sodium salt form has been made by IR, <sup>1</sup>H NMR and <sup>13</sup>C NMR etc. It is shown that the sulfonation appears to take place exclusively in the ortho position to phenolic ether of phenolphthalein unit. The result is in agreement with theoretical deduction. Some properties of the sulfonated PEK-C, such as solubility, transition temperature, thermal degradation and hydrophilicity have also been discussed.展开更多
Fabricating a desired porous structure on the surface of biomedical polyetheretherketone(PEEK)implants for enhancing biological functions is crucial and difficult due to its inherent chemical inertness.In this study,a...Fabricating a desired porous structure on the surface of biomedical polyetheretherketone(PEEK)implants for enhancing biological functions is crucial and difficult due to its inherent chemical inertness.In this study,a porous surface of PEEK implants was fabricated by controllable sulfonation using gaseous sulfur trioxide(SO3)for different time(5,15,30,60 and 90 min).Micro-topological structure was generated on the surface of sulfonated PEEK implants preserving original mechanical properties.The protein absorption capacity and apatite forming ability was thus improved by the morphological and elemental change with higher degree of sulfonation.In combination of the appropriate micromorphology and bioactive sulfonate components,the cell adhesion,migration,proliferation and extracellular matrix secretion were obviously enhanced by the SPEEK-15 samples which were sulfonated for 15 min.Finding from this study revealed that controllable sulfonation by gaseous SO3 would be an extraordinarily strategy for improving osseointegration of PEEK implants by adjusting the microstructure and chemical composition while maintaining excellent mechanical properties.展开更多
It is well‑known that the sulfonation degree(DS)of aromatic syntan is an important factor affecting its retanning performances.But the quantitative relation between DS and syntan property and the influencing mechanism...It is well‑known that the sulfonation degree(DS)of aromatic syntan is an important factor affecting its retanning performances.But the quantitative relation between DS and syntan property and the influencing mechanism of DS on syntan property are not clarified.In this work,five phenolic formaldehyde syntans(PFSs)with the same polym‑erization degree but varying DS were prepared to investigate the effect of DS on the properties of syntan and crust leather.It was found that the absolute value of zeta potential and the particle size of PFS decreased with increasing DS in aqueous solution.Molecular dynamic simulation results proved that the DS of PFS was a major contributor to electrostatic interaction and hydrogen bonding in the PFS–water system and greatly affected the aggregation and dispersion of PFS in aqueous solution.The PFS with a low DS was prone to aggregate to large particles in aqueous solution because of low intermolecular electrostatic repulsion and less hydrogen bonds and therefore can be used to increase the thickness and tightness of leather.The PFS with a high DS presented a small particle size with more anionic groups in aqueous solution,thereby sharply decreasing the positive charge of leather surface and facilitat‑ing the penetration of the post‑tanning agents into the leather.These results might be scientifically valid for rational molecular design of syntans and more productive use of syntans in leather making.展开更多
Wheat germplasm is a fundamental resource for basic research,applied studies,and wheat breeding,which can be enriched normally by several paths,such as collecting natural lines,accumulating breeding lines,and introduc...Wheat germplasm is a fundamental resource for basic research,applied studies,and wheat breeding,which can be enriched normally by several paths,such as collecting natural lines,accumulating breeding lines,and introducing mutagenesis materials.Ethyl methane sulfonate(EMS)is an alkylating agent that can effectively introduce genetic variations in a wide variety of plant species.In this study,we created a million-scale EMS population(MEP)that started with the Chinese wheat cultivars‘Luyan 128’,‘Jimai 38’,‘Jimai 44’,and‘Shannong 30’.In the M1 generation,the MEP had numerous phenotypical variations,such as>3,000 chlorophyll-deficient mutants,2,519 compact spikes,and 1,692 male sterile spikes.There were also rare mutations,including 30 independent tillers each with double heads.Some M1 variations of chlorophyll-deficiency and compact spikes were inheritable,appearing in the M2 or M3 generations.To advance the entire MEP to higher generations,we adopted a single-seed descendent(SSD)approach.All other seed composites of M2 were used to screen other agronomically important traits,such as the tolerance to herbicide quizalofop-P-methyl.The MEP is available for collaborative projects,and provides a valuable toolbox for wheat genetics and breeding for sustainable agriculture.展开更多
The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Never...The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.展开更多
A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone ...A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone and 4,4’-biphenol by one-pot and two-pot polymerization.;H-NMR and FTIR spectra confirmed the structure that sulfonic acid groups were introduced precisely on the poly(arylene ether sulfone)s by post-sulfonation which resulted in controllable sulfonation degree.The proton exchange membranes(PEMs)-based SPAES displayed excellent dimensional,thermal,antioxidant stability,proton conductivity and mechanical properties(maximum tensile stress>35 MPa).Thermogravimetric analysis indicated the prepared SPAES began to degrade above 310℃.The effects of polymerization processes,those were,one-pot hydrophobic segment process,one-pot hydrophilic segment process and two-pot process,on the properties of polymers were investigated.The proton conductivity and microphase separation of SPAES PEMs increased in order of those prepared by one-pot hydrophobic segment process,two-pot process and one-pot hydrophilic segment process.The highest conductivities of SPAES synthesized by the above processes under 80℃ and 100%relative humidity were 213(MS4),297(MB3)and 360 mS·cm^(-1)(MQ2),respectively.展开更多
To valorize kraft lignin,hydroxymethylation and sulfonation were applied on this under-utilized,but vastly available,material.The hydroxymethylation pretreatment was conducted as means to improve the reactivity of lig...To valorize kraft lignin,hydroxymethylation and sulfonation were applied on this under-utilized,but vastly available,material.The hydroxymethylation pretreatment was conducted as means to improve the reactivity of lignin.The sulfonation of hydroxymethylated kraft lignin was investigated by sulfuric acid and sodium sulfite treatments under various conditions.The modified lignin samples were characterized for their charge density,solubility,elemental components,and molecular weights.The results showed that the hydroxymethylation facilitated the sulfonation by sodium sulfite,yielding a product(SSH-lignin)with the charge density of-1.2 meq/g and water solubility of 10 g/L under the conditions of Ns_(2)SO_(3)/lignin molar ratio of 0.49 mol/mol,95℃and 3 h.On the other hand,hydroxymethylation hindered the sulfonation of lignin by sulfuric acid,yielding a product(SAH-lignin)with the charge density of–0.46 meq/g and solubility of 0.9 g/L under the conditions of H_(2)SO_(4)/lignin molar ratio of 14.8 mol/mol,80℃and 1 h.The SSH-lignin had a high adsorption on kaolinite(17 mg/g)at a lignin concentration of 40 g/L.The sulfonated lignins were also found to be effective coagulant for the cationic dye ethyl violet.展开更多
Modular free-assembly construction of mono-,di-,and tri-fluoromethyl sulfones was comprehensively achieved by a combination of halides,a sulfur dioxide surrogate,and halofluorocarbons.The industrial raw material thiou...Modular free-assembly construction of mono-,di-,and tri-fluoromethyl sulfones was comprehensively achieved by a combination of halides,a sulfur dioxide surrogate,and halofluorocarbons.The industrial raw material thiourea dioxide served as the sulfur dioxide source,combined with readily available fluorocarbon sources such as 2-bromo-2-fluoroacetate and chlorodifluoromethane(ClCF_(2)H,Freon)employed as fluoromethyl reagents.Notably,four methyl sulfone-containing pharmaceuticals were modified into three types of fluoromethyl sulfones,displaying their great potential for drug discovery via the current strategy.Mechanistic studies further demonstrated that C-F…H-N interactions between thiourea dioxide and halofluorocarbons play a key role in stabilizing monofluoromethyl electrophiles and difluorocarbene species.展开更多
Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utili...Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.展开更多
Critical issues of Zn anodes including undesirable dendrites formation and parasitic reactions severely limit the reversibility and cyclability of Zn anodes.To address these issues,a functional Janus separator with th...Critical issues of Zn anodes including undesirable dendrites formation and parasitic reactions severely limit the reversibility and cyclability of Zn anodes.To address these issues,a functional Janus separator with the structure of a mechanically strong sulfonated poly(arylene ether sulfone)(SPAES)dense layer composited on a porous glass fiber(GF)substrate is designed.The SPAES dense layer that faces the Zn anode containing abundant sulfonic acid groups effectively promotes the desolvation process of hydrated Zn ions,guides uniform Zn ion transfer,and blocks anions and water,contributing to dendrite-free and highly reversible Zn plating/stripping cycles,while the porous GF substrate retains high electrolyte uptake.As a result,the Zn symmetric cell with the Janus separator demonstrates an ultralong cycling lifespan of over 2000 h at the areal capacity of 1 m A h cm^(-2),which is 23-fold superior to that with a pristine glass fiber separator(<90 h).More impressively,the as-prepared Janus separator enables outstanding rate performance and excellent cycling stability of full Zn ion batteries with diverse cathode materials.For instance,when paired with the V_2O_(5)cathode,the full battery with a Janus separator attains an ultrahigh initial specific capacity of 416.3 m A h g^(-1)and capacity retention of 60%over 450 cycles at 1 A g^(-1),exceeding that with a glass fiber separator.Hence,this work provides a facile yet effective approach to mitigating the dendrites formation and ameliorating the parasitic reactions of Zn metal anodes for high-performance Zn ion batteries.展开更多
Layered double hydroxides(LDHs)have been shown to be effective adsorbents for boron.However,solid-liquid separation is still a problem when separating boron from industrial radioactive waste liquid.In this research,th...Layered double hydroxides(LDHs)have been shown to be effective adsorbents for boron.However,solid-liquid separation is still a problem when separating boron from industrial radioactive waste liquid.In this research,three types of Mg-Al-LDHs including Mg-Al-LDH(NO_(3)^(-)),Mg-Al-LDH(Cl^(-))and Mg-Al-LDH(SO_(4)^(2-))were applied to adsorb boron,and moreover sodium dodecylbenzenesulfonate(SDBS)was used to float the LDH particles from aqueous solution after boron adsorption.The results showed that 60 min was sufficient for the equilibrium adsorption of the three LDHs.The boron adsorption capacity of three LDHs was determined as follows:Mg-Al-LDH(NO_(3)^(-))>Mg-Al-LDH(Cl^(-))>Mg-Al-LDH(SO_(4)^(2-)),and was 2.0,0.98 and 0.2 mmol·g^(-1),each ranging from 0 to 80 mmol·L^(-1)with the initial boron concentration.The efficiency of boron removal by Mg-Al-LDH(NO_(3)^(-))and SDBS can reach up to 89.7%.Furthermore,the boron flotation mechanism of SDBS and LDHs has been studied,since SDBS as a flotation agent can react with LDHs and penetrate into the interlayer of LDHs in addition to electrostatic attraction.Therefore,LDHs in solution can be floated onto the foam layer to be separated from the solution,and the clarified solution was obtained.The method is simple and promising for boron removal from aqueous solution.展开更多
Taurine(2-amino-ethanesulfonic acid)is a naturally occurring amino sulfonic acid derived from cysteine and methionine metabolism.Its common name derives from the ox,as it was first isolated from the bile of an ox(Frog...Taurine(2-amino-ethanesulfonic acid)is a naturally occurring amino sulfonic acid derived from cysteine and methionine metabolism.Its common name derives from the ox,as it was first isolated from the bile of an ox(Froger et al.,2014).The molecular structure of taurine differs from that of amino acids by the presence of a sulfonic acid,instead of the more common carboxylic acid group in the structure of amino acids.展开更多
Direct methanol fuel cells(DMFCs) have attracted extensive attention as promising next-generation energy conversion devices. However, commercialized proton exchange membranes(PEMs) hardly fulfill the demand of methano...Direct methanol fuel cells(DMFCs) have attracted extensive attention as promising next-generation energy conversion devices. However, commercialized proton exchange membranes(PEMs) hardly fulfill the demand of methanol tolerance for DMFCs employing high-concentration methanol solutions.Herein, we report a series of semi-crystalline poly(arylene ether ketone) PEMs with ultra-densely sulfonic-acid-functionalized pendants linked by flexible alkyl chains, namely, SL-SPEK-x(where x represents the molar ratio of the novel monomer containing multiple phenyl side chain to the bisfluoride monomers). The delicate structural design rendered SL-SPEK-x membranes with high crystallinity and well-defined nanoscale phase separation between hydrophilic and hydrophobic phases. The reinforcement from poly(ether ketone) crystals enabled membranes with inhibited dimensional variation and methanol penetration. Furthermore, microphase separation significantly enhanced proton conductivity. The SL-SPEK-12.5 membrane achieved the optimum trade-off between proton conductivity(0.182 S cm^(-1), 80 ℃), water swelling(13.6%, 80 ℃), and methanol permeability(1.6 × 10^(-7)cm~2 s^(-1)). The DMFC assembled by the SL-SPEK-12.5 membrane operated smoothly with a 10 M methanol solution, outputting a maximum power density of 158.3 mW cm^(-2), nearly twice that of Nafion 117(94.2 mW cm^(-2)). Overall, the novel structural optimization strategy provides the possibility of PEMs surviving in high-concentration methanol solutions, thus facilitating the miniaturization and portability of DMFC devices.展开更多
The available alkaline recovery membranes are currently dominated by polymeric materials,but they suffer from a permeation-selectivity trade-off and inferior chemical resistance.Robust two dimensional(2D) lamellar mem...The available alkaline recovery membranes are currently dominated by polymeric materials,but they suffer from a permeation-selectivity trade-off and inferior chemical resistance.Robust two dimensional(2D) lamellar membranes with sub-nanometer wide channels are promising candidates for discerning OH^(-)and other anions.Here,we report the development of alkaline recycling membranes through stacking MoS_(2) nanosheets.Benefiting from the ordered and narrow 2D channels,MoS_(2) membranes show excellent alkaline recovery performances.The OH^(-)dialysis coefficient (U_(OH)-) and separation factor (S)towards simulated OH^(-) and WO_(4)^(2-) across the 500 nm thick MoS_(2) laminates reach 6.9×10^(-3)m·h^(-1)and 34.3 respectively.Furthermore,the chemical environments of MoS_(2) laminates were modulated by intercalating ionic poly(sodium 4-styrene sulfonate)(PSS@MoS_(2)).The U_(OH)-and S values of PSS@MoS_(2) membrane further improve to 11.7×10^(-3)m·h^(-1)and 49.8 respectively.Besides,both MoS_(2) and PSS@MoS_(2) membranes exhibit promising stability.展开更多
Rod milling sand(RMS)—a coarse sand aggregate—was recycled for cemented paste backfill(CPB)for the underground mined area at the Jinchuan nickel deposit,named rod milling sand-based cemented paste backfill(RCPB).The...Rod milling sand(RMS)—a coarse sand aggregate—was recycled for cemented paste backfill(CPB)for the underground mined area at the Jinchuan nickel deposit,named rod milling sand-based cemented paste backfill(RCPB).The adverse effects of coarse particles on the transportation of CPB slurry through pipelines to underground stopes resulting in weakening of the stability of the backfill system are well known.Therefore,sulfonated naphthalene formaldehyde(SNF)condensate was used for the performance improvement of RCPB.The synergistic effect of solid content(SC),lime-to-sand ratio,and SNF dosage on the rheological and physicomechanical properties,including slump,yield stress,bleeding rate,uniaxial compressive strength(UCS),as well as mechanism analysis of RCPB,have been explored.The results indicate that the effect of SNF on RCPB performance is related to the SNF dosage,lime-to-sand ratio,and SC.The slump of fresh RCPB with 0.1wt%-0.5wt%SNF increased by 2.6%-26.2%,whereas the yield stress reduced by 4.1%-50.3%,indicating better workability and improved cohesiveness of the mix.The bleeding rate of fresh RCPB decreased first and then rose with the increase of SNF dosage,and the peak decrease was 67.67%.UCS of RCPB first increased and then decreased with the increase of SNF dosage.At the optimal SNF addition ratio of 0.3wt%,the UCS of RCPB curing for 7,14 and,28 d ages increased by 31.5%,28.4%,and 29.5%,respectively.The beneficial effects of SNF in enhancing the early UCS of RCPB have been corroborated.However,the later UCS increases at a slower rate.The research findings may guide the design and preparation of RCPB with adequate performance for practical applications.展开更多
Objective: The aim is to observe the protective effect of baicalin on trinitrobenzene sulfonic acid (TNBS)-induced experimental colitis in mice and explore its mechanism. Methods: The mice were divided into 4 groups: ...Objective: The aim is to observe the protective effect of baicalin on trinitrobenzene sulfonic acid (TNBS)-induced experimental colitis in mice and explore its mechanism. Methods: The mice were divided into 4 groups: ethanol control group, TNBS model group, baicalin low-dose group and baicalin high-dose group. The model of experimental colitis in mice was induced by TNBS enema. After 2 hours of TNBS enema, baicalin was given by gavage, QD × 7D. The animals were sacrificed on the 8th day to observe the extent of colonic mucosal damage, and the Peroxidase activity, Malondialdehyde (MDA) and glutathione (GSH) contents were measured. Results: Compared with the TNBS model group, the body weight, gross injury score and histological changes were significantly improved;MPO enzyme activity and MDA content were significantly decreased in the low and high-dose baicalin groups;and the content of glutathione increased. Conclusion: Baicalin can alleviate TNBS-induced colitis in mice, and the mechanism is related to the antioxidation of baicalin.展开更多
基金financially supported by the National Key Research and Development Program of China(2016YFB0301500)the National Natural Science Foundation of China(21878009)。
文摘The work herein employed a rotating packed bed(RPB)to intensify the sulfonation process of 1,4-diaminoanthraquinone leuco(DL)in an attempt to improve the yield of the product 1,4-diaminoanthra quinone-2-sulfonic acid(DSA).First,the effects of operating conditions in a stirred tank reactor(STR),including stirring speed,chlorosulfonic acid/DL molar ratio(η),solvent/DL mass ratio(ζ),reaction temperature and dropping speed of chlorosulfonic acid,on the yield of DSA were investigated.The yield of DSA can reach 87.34%under the optimal operating conditions:stirring speed of 500 r·min^(-1),ηof 4.5,ζof 7,reaction temperature of 150℃,dropping speed of 0.61 ml·min^(-1).In addition,the kinetics of the sulfonation process via the shrinking core model revealed that the reaction is controlled by diffusion via a product layer under the reaction temperature of 140℃.Furthermore,the RPB was employed to intensify the mass transfer between liquid and solid phases during the sulfonation reaction process.The results showed that the DSA yield of 92.69%obtained by RPB was 5.35%higher than that by STR,indicating that RPB can significantly intensify the mass transfer in the liquid-solid phase sulfonation reaction process.
基金Project(50574061) supported by the National Natural Science Foundation of China
文摘Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.
基金supported by the National Natural Science Foundation of China (Nos. 21878222 and 21621004)。
文摘Our previous work proved that high adsorption capacity and uptake rate of lysozyme were achieved on alginate(Alg)-grafted re sin with an ionic capacity(IC) of 240 mmol·L^(-1)(Alg-FF-240).Moreover,the salt-tolerant feature of Alg-FF-230 was improved by using sequential alginate grafting and sulfonation strategy.Inspired by the enhanced adsorption performance of lysozyme,we have herein proposed to investigate the static and dynamic adsorption behaviors of γ-globulin on a series of Alg-grafted resins with different grafting densities and sulfonation degrees.The adsorption ca pacity of γ-globulin decreased with increa sing alginate-grafting density(IC) from 160 to 230 mmol·L^(-1) at 0 mmol·L^(-1) NaCl because of the steric hindrance caused by the alginate-grafting layer.Effects of ionic strength(IS) indicated that the adsorption capacities of the resins with the IC value of 230-370 mmol·L^(-1) were much higher than CM Sepharose FF at 50-100 mmol·L^(-1) NaCl,and the uptake rate of Alg-FF-230 was about twice as much as that of CM Sepharose FF.This work demonstrated the important effects of alginate-grafting layer and IS in γ-globulin adsorption behavior,which would be helpful in the design of Alggrafted resins and the selection of proper IS condition for protein purification.
基金The authors graefully acknowledge financial support from the National Natural Science Foundation of China (29976040), Natural Science Foundation of Anhui Province (99045431), Key Foundation of Anhui Educational Comrnittee (2000j1255zd), the Foundation of
文摘This paper investigates the possibility of attaining sulphonated poly(phenylene oxide) (SPPO) with a relatively higher sulfonation degree. To achieve this aim, the approach we adopt is to improve the solubility of the final product in the mixed solvent so that the sulfonation may take place between the bulk solutions and PPO powders even at higher sulfonation degree. It is shown that the addition of a proper amount of dimethyl formide (DMF) to the conventional PPO-chloroform system can actually enhance the sulfonation effect. The solvent composition is then correlated with the sulfonation degree based on the solubility parameters. It is interesting to find that solubility parameters between the mixed solvent and the precipitated products keep an approximately unchanged value at about 4.9, which is just equal to that when pure chloroform is used, though the solubility parameters of both solvents increase with the content of DMF in solution. This may be the main reason why the addition of DMF can reduce the precipitation and improve the ion exchange capacity (IEC) of SPPO polymer.
文摘A novel polyetheretherketone (PEK-C) prepared from phenolphthalein has been synthesized. In order to improve some of its properties for application in high performance membrane, the PEK-C has been sulfonated with concentrated sulfuric acid. Degree of sulfonation can be regulated by controlling the temmperature and time of sulfonation. The characterization of the sulfonated PEK-C in sodium salt form has been made by IR, <sup>1</sup>H NMR and <sup>13</sup>C NMR etc. It is shown that the sulfonation appears to take place exclusively in the ortho position to phenolic ether of phenolphthalein unit. The result is in agreement with theoretical deduction. Some properties of the sulfonated PEK-C, such as solubility, transition temperature, thermal degradation and hydrophilicity have also been discussed.
基金financially supported by the National Natural Science Foundation of China(Projects.51673186 , 81672263)the Special Fund for Industrialization of Science and Technology Cooperation between Jilin Province and Chinese Academy of Sciences(2017SYHZ0021).
文摘Fabricating a desired porous structure on the surface of biomedical polyetheretherketone(PEEK)implants for enhancing biological functions is crucial and difficult due to its inherent chemical inertness.In this study,a porous surface of PEEK implants was fabricated by controllable sulfonation using gaseous sulfur trioxide(SO3)for different time(5,15,30,60 and 90 min).Micro-topological structure was generated on the surface of sulfonated PEEK implants preserving original mechanical properties.The protein absorption capacity and apatite forming ability was thus improved by the morphological and elemental change with higher degree of sulfonation.In combination of the appropriate micromorphology and bioactive sulfonate components,the cell adhesion,migration,proliferation and extracellular matrix secretion were obviously enhanced by the SPEEK-15 samples which were sulfonated for 15 min.Finding from this study revealed that controllable sulfonation by gaseous SO3 would be an extraordinarily strategy for improving osseointegration of PEEK implants by adjusting the microstructure and chemical composition while maintaining excellent mechanical properties.
基金This work was supported by the National Natural Science Foundation of China(21978176).
文摘It is well‑known that the sulfonation degree(DS)of aromatic syntan is an important factor affecting its retanning performances.But the quantitative relation between DS and syntan property and the influencing mechanism of DS on syntan property are not clarified.In this work,five phenolic formaldehyde syntans(PFSs)with the same polym‑erization degree but varying DS were prepared to investigate the effect of DS on the properties of syntan and crust leather.It was found that the absolute value of zeta potential and the particle size of PFS decreased with increasing DS in aqueous solution.Molecular dynamic simulation results proved that the DS of PFS was a major contributor to electrostatic interaction and hydrogen bonding in the PFS–water system and greatly affected the aggregation and dispersion of PFS in aqueous solution.The PFS with a low DS was prone to aggregate to large particles in aqueous solution because of low intermolecular electrostatic repulsion and less hydrogen bonds and therefore can be used to increase the thickness and tightness of leather.The PFS with a high DS presented a small particle size with more anionic groups in aqueous solution,thereby sharply decreasing the positive charge of leather surface and facilitat‑ing the penetration of the post‑tanning agents into the leather.These results might be scientifically valid for rational molecular design of syntans and more productive use of syntans in leather making.
基金This work was supported by the National Key Research and Development Program of China(2022YFF1002300)the Quancheng‘5150’Talent Program,China(07962021047)the Agriculture Applied Technology Initiative of Jinan Government,China(CX202113).
文摘Wheat germplasm is a fundamental resource for basic research,applied studies,and wheat breeding,which can be enriched normally by several paths,such as collecting natural lines,accumulating breeding lines,and introducing mutagenesis materials.Ethyl methane sulfonate(EMS)is an alkylating agent that can effectively introduce genetic variations in a wide variety of plant species.In this study,we created a million-scale EMS population(MEP)that started with the Chinese wheat cultivars‘Luyan 128’,‘Jimai 38’,‘Jimai 44’,and‘Shannong 30’.In the M1 generation,the MEP had numerous phenotypical variations,such as>3,000 chlorophyll-deficient mutants,2,519 compact spikes,and 1,692 male sterile spikes.There were also rare mutations,including 30 independent tillers each with double heads.Some M1 variations of chlorophyll-deficiency and compact spikes were inheritable,appearing in the M2 or M3 generations.To advance the entire MEP to higher generations,we adopted a single-seed descendent(SSD)approach.All other seed composites of M2 were used to screen other agronomically important traits,such as the tolerance to herbicide quizalofop-P-methyl.The MEP is available for collaborative projects,and provides a valuable toolbox for wheat genetics and breeding for sustainable agriculture.
基金supported by the National Natural Science Foundation of China(51978133,52100026,U20A20322,52170151,51978132)the Fundamental Research Funds for the Central Universities of China(2412021QD022)+1 种基金the Key Research and Development Project of Hainan Province(ZDYF2022SHFZ298)the Industrialization Cultivation Project of Jilin Provincial Department of Education(JJKH20221174CY)。
文摘The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.
基金financially supported by the National Natural Science Foundation of China(No.21306010)。
文摘A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone and 4,4’-biphenol by one-pot and two-pot polymerization.;H-NMR and FTIR spectra confirmed the structure that sulfonic acid groups were introduced precisely on the poly(arylene ether sulfone)s by post-sulfonation which resulted in controllable sulfonation degree.The proton exchange membranes(PEMs)-based SPAES displayed excellent dimensional,thermal,antioxidant stability,proton conductivity and mechanical properties(maximum tensile stress>35 MPa).Thermogravimetric analysis indicated the prepared SPAES began to degrade above 310℃.The effects of polymerization processes,those were,one-pot hydrophobic segment process,one-pot hydrophilic segment process and two-pot process,on the properties of polymers were investigated.The proton conductivity and microphase separation of SPAES PEMs increased in order of those prepared by one-pot hydrophobic segment process,two-pot process and one-pot hydrophilic segment process.The highest conductivities of SPAES synthesized by the above processes under 80℃ and 100%relative humidity were 213(MS4),297(MB3)and 360 mS·cm^(-1)(MQ2),respectively.
文摘To valorize kraft lignin,hydroxymethylation and sulfonation were applied on this under-utilized,but vastly available,material.The hydroxymethylation pretreatment was conducted as means to improve the reactivity of lignin.The sulfonation of hydroxymethylated kraft lignin was investigated by sulfuric acid and sodium sulfite treatments under various conditions.The modified lignin samples were characterized for their charge density,solubility,elemental components,and molecular weights.The results showed that the hydroxymethylation facilitated the sulfonation by sodium sulfite,yielding a product(SSH-lignin)with the charge density of-1.2 meq/g and water solubility of 10 g/L under the conditions of Ns_(2)SO_(3)/lignin molar ratio of 0.49 mol/mol,95℃and 3 h.On the other hand,hydroxymethylation hindered the sulfonation of lignin by sulfuric acid,yielding a product(SAH-lignin)with the charge density of–0.46 meq/g and solubility of 0.9 g/L under the conditions of H_(2)SO_(4)/lignin molar ratio of 14.8 mol/mol,80℃and 1 h.The SSH-lignin had a high adsorption on kaolinite(17 mg/g)at a lignin concentration of 40 g/L.The sulfonated lignins were also found to be effective coagulant for the cationic dye ethyl violet.
基金financial support provided by the NSFC(nos.22071057,21971065,and 21871089)STCSM(nos.20XD1421500,20JC1416800,and 18JC1415600)+1 种基金the Innovative Research Team of High-Level Local Universities in Shanghai(no.SSMU-ZLCX20180501)the Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning.
文摘Modular free-assembly construction of mono-,di-,and tri-fluoromethyl sulfones was comprehensively achieved by a combination of halides,a sulfur dioxide surrogate,and halofluorocarbons.The industrial raw material thiourea dioxide served as the sulfur dioxide source,combined with readily available fluorocarbon sources such as 2-bromo-2-fluoroacetate and chlorodifluoromethane(ClCF_(2)H,Freon)employed as fluoromethyl reagents.Notably,four methyl sulfone-containing pharmaceuticals were modified into three types of fluoromethyl sulfones,displaying their great potential for drug discovery via the current strategy.Mechanistic studies further demonstrated that C-F…H-N interactions between thiourea dioxide and halofluorocarbons play a key role in stabilizing monofluoromethyl electrophiles and difluorocarbene species.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1F1A1070168,2020R1C1C1004322)the Korea Institute of Industrial Technology as Development of core technology for smart wellness care based on cleaner production process technology(KITECH-PEH23030)+1 种基金supported by the Renewable Surplus Sector Coupling Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20226210100050)the National Research Council of Science&Technology(NST)grant by the Korea government(MSIT)(No.CPS21141-100)。
文摘Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.
基金fully supported by the Research Grant Council Collaborative Research Fund of the Hong Kong Special Administrative Region,China (C5031-20G)。
文摘Critical issues of Zn anodes including undesirable dendrites formation and parasitic reactions severely limit the reversibility and cyclability of Zn anodes.To address these issues,a functional Janus separator with the structure of a mechanically strong sulfonated poly(arylene ether sulfone)(SPAES)dense layer composited on a porous glass fiber(GF)substrate is designed.The SPAES dense layer that faces the Zn anode containing abundant sulfonic acid groups effectively promotes the desolvation process of hydrated Zn ions,guides uniform Zn ion transfer,and blocks anions and water,contributing to dendrite-free and highly reversible Zn plating/stripping cycles,while the porous GF substrate retains high electrolyte uptake.As a result,the Zn symmetric cell with the Janus separator demonstrates an ultralong cycling lifespan of over 2000 h at the areal capacity of 1 m A h cm^(-2),which is 23-fold superior to that with a pristine glass fiber separator(<90 h).More impressively,the as-prepared Janus separator enables outstanding rate performance and excellent cycling stability of full Zn ion batteries with diverse cathode materials.For instance,when paired with the V_2O_(5)cathode,the full battery with a Janus separator attains an ultrahigh initial specific capacity of 416.3 m A h g^(-1)and capacity retention of 60%over 450 cycles at 1 A g^(-1),exceeding that with a glass fiber separator.Hence,this work provides a facile yet effective approach to mitigating the dendrites formation and ameliorating the parasitic reactions of Zn metal anodes for high-performance Zn ion batteries.
基金financially supported by the National Natural Science Foundation of China(U20A20150)the National Key Research and Development Program of China(2018YFC1903802)+1 种基金the Youth Scientific Research Fund of Qinghai University(2022QGY-4)the Kunlun Talent Program of Qinghai Province。
文摘Layered double hydroxides(LDHs)have been shown to be effective adsorbents for boron.However,solid-liquid separation is still a problem when separating boron from industrial radioactive waste liquid.In this research,three types of Mg-Al-LDHs including Mg-Al-LDH(NO_(3)^(-)),Mg-Al-LDH(Cl^(-))and Mg-Al-LDH(SO_(4)^(2-))were applied to adsorb boron,and moreover sodium dodecylbenzenesulfonate(SDBS)was used to float the LDH particles from aqueous solution after boron adsorption.The results showed that 60 min was sufficient for the equilibrium adsorption of the three LDHs.The boron adsorption capacity of three LDHs was determined as follows:Mg-Al-LDH(NO_(3)^(-))>Mg-Al-LDH(Cl^(-))>Mg-Al-LDH(SO_(4)^(2-)),and was 2.0,0.98 and 0.2 mmol·g^(-1),each ranging from 0 to 80 mmol·L^(-1)with the initial boron concentration.The efficiency of boron removal by Mg-Al-LDH(NO_(3)^(-))and SDBS can reach up to 89.7%.Furthermore,the boron flotation mechanism of SDBS and LDHs has been studied,since SDBS as a flotation agent can react with LDHs and penetrate into the interlayer of LDHs in addition to electrostatic attraction.Therefore,LDHs in solution can be floated onto the foam layer to be separated from the solution,and the clarified solution was obtained.The method is simple and promising for boron removal from aqueous solution.
基金supported by Instituto de Salud CarlosⅢ(ISCⅢ):PI19/00203,co-funded by ERDF“A way to make Europe”to MPVP and DGA,RD16/0008/0026 co-funded by ERDF+3 种基金“A way to make Europe”to MPVP and RD21/0002/0014 financiado por la Unión Europea–Next Generation EUFundación Robles Chillida to DGAthe RHU LIGHT4DEAF[ANR-15-RHU-0001]IHU FORe SIGHT[ANR-18-IAHU-0001]to SP。
文摘Taurine(2-amino-ethanesulfonic acid)is a naturally occurring amino sulfonic acid derived from cysteine and methionine metabolism.Its common name derives from the ox,as it was first isolated from the bile of an ox(Froger et al.,2014).The molecular structure of taurine differs from that of amino acids by the presence of a sulfonic acid,instead of the more common carboxylic acid group in the structure of amino acids.
基金supported by the program of Jilin Provincial Department of Science and Technology (YDZJ202301ZYTS320)。
文摘Direct methanol fuel cells(DMFCs) have attracted extensive attention as promising next-generation energy conversion devices. However, commercialized proton exchange membranes(PEMs) hardly fulfill the demand of methanol tolerance for DMFCs employing high-concentration methanol solutions.Herein, we report a series of semi-crystalline poly(arylene ether ketone) PEMs with ultra-densely sulfonic-acid-functionalized pendants linked by flexible alkyl chains, namely, SL-SPEK-x(where x represents the molar ratio of the novel monomer containing multiple phenyl side chain to the bisfluoride monomers). The delicate structural design rendered SL-SPEK-x membranes with high crystallinity and well-defined nanoscale phase separation between hydrophilic and hydrophobic phases. The reinforcement from poly(ether ketone) crystals enabled membranes with inhibited dimensional variation and methanol penetration. Furthermore, microphase separation significantly enhanced proton conductivity. The SL-SPEK-12.5 membrane achieved the optimum trade-off between proton conductivity(0.182 S cm^(-1), 80 ℃), water swelling(13.6%, 80 ℃), and methanol permeability(1.6 × 10^(-7)cm~2 s^(-1)). The DMFC assembled by the SL-SPEK-12.5 membrane operated smoothly with a 10 M methanol solution, outputting a maximum power density of 158.3 mW cm^(-2), nearly twice that of Nafion 117(94.2 mW cm^(-2)). Overall, the novel structural optimization strategy provides the possibility of PEMs surviving in high-concentration methanol solutions, thus facilitating the miniaturization and portability of DMFC devices.
基金partially supported by the National Key Research and Development Program of China (2022YFB3805102)the National Natural Science Foundation of China (22278105, 21978062)。
文摘The available alkaline recovery membranes are currently dominated by polymeric materials,but they suffer from a permeation-selectivity trade-off and inferior chemical resistance.Robust two dimensional(2D) lamellar membranes with sub-nanometer wide channels are promising candidates for discerning OH^(-)and other anions.Here,we report the development of alkaline recycling membranes through stacking MoS_(2) nanosheets.Benefiting from the ordered and narrow 2D channels,MoS_(2) membranes show excellent alkaline recovery performances.The OH^(-)dialysis coefficient (U_(OH)-) and separation factor (S)towards simulated OH^(-) and WO_(4)^(2-) across the 500 nm thick MoS_(2) laminates reach 6.9×10^(-3)m·h^(-1)and 34.3 respectively.Furthermore,the chemical environments of MoS_(2) laminates were modulated by intercalating ionic poly(sodium 4-styrene sulfonate)(PSS@MoS_(2)).The U_(OH)-and S values of PSS@MoS_(2) membrane further improve to 11.7×10^(-3)m·h^(-1)and 49.8 respectively.Besides,both MoS_(2) and PSS@MoS_(2) membranes exhibit promising stability.
基金financially supported by the National Natural Science Foundation of China(Nos.52104156,52074351,52004330)the Science and Technology Innovation Program of Hunan Province,China(No.2021RC3125)the Natural Science Foundation of Hunan Province,China(No.2022JJ30714)。
文摘Rod milling sand(RMS)—a coarse sand aggregate—was recycled for cemented paste backfill(CPB)for the underground mined area at the Jinchuan nickel deposit,named rod milling sand-based cemented paste backfill(RCPB).The adverse effects of coarse particles on the transportation of CPB slurry through pipelines to underground stopes resulting in weakening of the stability of the backfill system are well known.Therefore,sulfonated naphthalene formaldehyde(SNF)condensate was used for the performance improvement of RCPB.The synergistic effect of solid content(SC),lime-to-sand ratio,and SNF dosage on the rheological and physicomechanical properties,including slump,yield stress,bleeding rate,uniaxial compressive strength(UCS),as well as mechanism analysis of RCPB,have been explored.The results indicate that the effect of SNF on RCPB performance is related to the SNF dosage,lime-to-sand ratio,and SC.The slump of fresh RCPB with 0.1wt%-0.5wt%SNF increased by 2.6%-26.2%,whereas the yield stress reduced by 4.1%-50.3%,indicating better workability and improved cohesiveness of the mix.The bleeding rate of fresh RCPB decreased first and then rose with the increase of SNF dosage,and the peak decrease was 67.67%.UCS of RCPB first increased and then decreased with the increase of SNF dosage.At the optimal SNF addition ratio of 0.3wt%,the UCS of RCPB curing for 7,14 and,28 d ages increased by 31.5%,28.4%,and 29.5%,respectively.The beneficial effects of SNF in enhancing the early UCS of RCPB have been corroborated.However,the later UCS increases at a slower rate.The research findings may guide the design and preparation of RCPB with adequate performance for practical applications.
文摘Objective: The aim is to observe the protective effect of baicalin on trinitrobenzene sulfonic acid (TNBS)-induced experimental colitis in mice and explore its mechanism. Methods: The mice were divided into 4 groups: ethanol control group, TNBS model group, baicalin low-dose group and baicalin high-dose group. The model of experimental colitis in mice was induced by TNBS enema. After 2 hours of TNBS enema, baicalin was given by gavage, QD × 7D. The animals were sacrificed on the 8th day to observe the extent of colonic mucosal damage, and the Peroxidase activity, Malondialdehyde (MDA) and glutathione (GSH) contents were measured. Results: Compared with the TNBS model group, the body weight, gross injury score and histological changes were significantly improved;MPO enzyme activity and MDA content were significantly decreased in the low and high-dose baicalin groups;and the content of glutathione increased. Conclusion: Baicalin can alleviate TNBS-induced colitis in mice, and the mechanism is related to the antioxidation of baicalin.