A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet dur...A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.展开更多
Aconduction-cooled superconducting magnet with central field of 10Tand warmbore of 100 mmwas designed based on a Nb3Sn and two NbTi superconducting coils.At the first stage,the NbTi coils havebeen fabricated andtested...Aconduction-cooled superconducting magnet with central field of 10Tand warmbore of 100 mmwas designed based on a Nb3Sn and two NbTi superconducting coils.At the first stage,the NbTi coils havebeen fabricated andtested.Atwo-stage 4 KGifford-McMahon(GM) cryocooler withthe second-stage powerin1W,4.2Kis used to cool the magnet fromroomtemperature to 4 K.The superconducting magnet with thesame power supply has the operating current of 116A.The magnet can be rotated with a support frame to beoperated with either horizontal or vertical position.Apair of Bi-2223 hightemperature superconductingcurrentleads was employedto reduce heat leakage into 4.2Klevel.The NbTi coils reachto the operating current of120Awithout training effect to be observed duringchargingof the magnet during40 minutes chargingtime andgenerate the center field of 6.5T.The training effect inthe NbTi magnet directly cool-down by cryocooler andinter-winding support structure in magnet can be remarkablyimproved.The superconducting magnet has beenstably operatedfor more than 275 hours with 6.5T.In this paper,the detailed design,fabrication,stressanalysis and quench protection characteristics are presented.展开更多
Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting app...Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.展开更多
Unpredictable power fluctuation and fault ridethrough capability attract increased attention as two uncertain major factors in doubly-fed induction generators(DFIGs)integrated DC power system.Present solutions usually...Unpredictable power fluctuation and fault ridethrough capability attract increased attention as two uncertain major factors in doubly-fed induction generators(DFIGs)integrated DC power system.Present solutions usually require complicated cooperation comprising multiple modules of energy storage,current control,and voltage stabilizer.To overcome the drawbacks of existing solutions,this paper proposes a superconducting magnetic energy storage(SMES)integrated currentsource DC/DC converter(CSDC).It is mainly composed of a current-source back-to-back converter,and the SMES is tactfully embedded in series with the intermediate DC link.The proposed SMES-CSDC is installed in front of the DC-DFIG to carry out its dual abilities of load voltage stabilization under multifarious transient disturbances and power regulation under wind speed variations.Compared with the existing DC protection devices,the SMES-CSDC is designed on the basis of unique current-type energy storage.It has the advantages of fast response,extensive compensation range,concise hardware structure,and straightforward control strategy.The feasibility of the SMESCSDC is implemented via a scaled-down experiment,and its effectiveness for DC-DFIG protection is verified by a large-scale DC power system simulation.展开更多
The relatively fragile low-temperature stability of cryogen-free superconducting magnetic resonance imaging(MRI)magnets requires the careful management of exogenous heat sources.A strongly shielded gradient magnetic f...The relatively fragile low-temperature stability of cryogen-free superconducting magnetic resonance imaging(MRI)magnets requires the careful management of exogenous heat sources.A strongly shielded gradient magnetic field is important for the optimal operation of cryogen-free MRI systems.In this study,we present an enhanced shielding method incorporating a regionalized stray field constraining strategy.By optimizing the constraint parameters,we could develop engineering-feasible gradient coil schemes without increasing system complexity but with the stray field intensity reduced by half.In real measurement in an integrated MRI system,the developed gradient assembly demonstrated good performance and supported to output images of excellent quality.Our findings suggested that the proposed method could potentially form a useful design paradigm for cryogen-free MRI magnets.展开更多
The fast-response feature from a superconducting magnetic energy storage(SMES)device is favored for suppressing instantaneous voltage and power fluctuations,but the SMES coil is much more expensive than a conventional...The fast-response feature from a superconducting magnetic energy storage(SMES)device is favored for suppressing instantaneous voltage and power fluctuations,but the SMES coil is much more expensive than a conventional battery energy storage device.In order to improve the energy utilization rate and reduce the energy storage cost under multiple-line power distribution conditions,this paper investigates a new interline DC dynamic voltage restorer(IDC-DVR)scheme with one SMES coil shared among multiple compensating circuits.In this new concept,an improved current-voltage(I/V)chopper assembly,which has a series of input/output power ports,is introduced to connect the single SMES coil with multiple power lines,and thereby satisfy the independent energy exchange requirements of any line to be compensated.Specifically,if two or more power lines have simultaneous compensating demands,the SMES coil can be selectively controlled to compensate the preferable line according to the priority order of the line.The feasibility of the proposed scheme is technically verified to maintain the transient voltage stability in multiple-line voltage swell and sag cases caused by either output voltage fluctuations from external power sources or power demand fluctuations from local sensitive loads.The simulation results provide a technical basis to develop a cost-effective SMES-based IDC-DVR for use in various DC distribution networks.展开更多
Purpose As the world energetic demand is increasing day by day,the development of nuclear energy is of great necessity.However,the development is followed by a lot of tough questions like the management and storage of...Purpose As the world energetic demand is increasing day by day,the development of nuclear energy is of great necessity.However,the development is followed by a lot of tough questions like the management and storage of the nuclear waste.ADS,which is short for the accelerator-driven sub-critical system,may be a good choice because it can provide an efficient transmutations of nuclear waste.Many countries have carried out some research in related areas like the USA,Japan and China.The superconducting magnet system The cryomodule I(CM1)for China’s ADS Injection-I had been designed,fabricated and online tested.The CM1 is mainly composed of superconducting spoke cavities,beam positionmonitors,cryogenic system and superconducting magnets.The superconducting magnet system,which includes the magnet and current leads,is aimed at focusing and correcting the proton beams.Conclusion Seven superconducting magnets and current leads for CM1 are successfully designed and manufactured.Structural strength meets design specifications,the field meets the design demands,and the online test shows that the magnets can work in a rather stable state.In this paper,the detailed design and installation of the superconducting magnets are presented.展开更多
To achieve the utilization of the abandoned ultrafine ilmenite(-20 μm) produced in the titanium magnetite processing plant in Panzhihua,the superconducting high-gradient magnetic separation(SMS) technology was propos...To achieve the utilization of the abandoned ultrafine ilmenite(-20 μm) produced in the titanium magnetite processing plant in Panzhihua,the superconducting high-gradient magnetic separation(SMS) technology was proposed in this study.After optimizing the conditions of magnetic intensity,feeding and pulsation,an SMS concentrate with TiO_(2) grade of 16.03% and TiO_(2) recovery of 66.39% was obtained through one roughing-one cleaning pre-concentration flowsheet.The specific magnetic force and magnetic force were calculated and analysed to illustrate the pre-concentration mechanism,and the results revealed that the combination of high magnetic field and strong pulsating resulted in the effective preconcentration of the ultrafine ilmenite in the SMS process.In addition,the magnetic force analysis indicated that the high magnetic intensity and high magnetic gradient are the key factors of the SMS technology.Furthermore,the EDS-Mapping detection certified that the ultrafine ilmenite was concentrated from the gangue minerals using SMS technology.展开更多
Highly textured (Bi,Pb)2Sr2Ca2Cu3Ox superconducting tapes have been fabricated by means of magnetic-field and vibration technique. This method is an effective way of improving the degree of grain alignment and density...Highly textured (Bi,Pb)2Sr2Ca2Cu3Ox superconducting tapes have been fabricated by means of magnetic-field and vibration technique. This method is an effective way of improving the degree of grain alignment and density of oxide core in tapes after heat treatment and pressing cycles.Jc of above 20% was increased than that without treatment.展开更多
A method is described for creating a measurable unbalanced gravitational acceleration using a gravitomagnetic field surrounding a superconducting toroid as described by Forward (1962). An experimental Superconducting ...A method is described for creating a measurable unbalanced gravitational acceleration using a gravitomagnetic field surrounding a superconducting toroid as described by Forward (1962). An experimental Superconducting Magnetic Energy Storage (SMES) toroid configuration of wound superconducting nanowire is proposed to create a measurable acceleration field along the axis of symmetry, providing experimental confirmation of the additive nature of a Lense-Thirring derived gravitomagnetic field. In the present paper, gravitational coupling enhancement of this effect is explored using a high index or high permittivity material, as predicted by Sarfatti (2020) using his modification to Einstein’s General Relativity Field Equations for gravitational coupling in matter.展开更多
Thyristors have longer lifetimes,higher reliability,and very high voltage and current ratings and they require less maintenance than other high-power semiconductor devices.As a result,they are particularly suitable fo...Thyristors have longer lifetimes,higher reliability,and very high voltage and current ratings and they require less maintenance than other high-power semiconductor devices.As a result,they are particularly suitable for quench protection systems(QPSs),which protect the superconducting magnets in large fusion devices from damage.In this paper,we propose a design for a 100 k A/10 k V thyristor stack supported by both theoretical and simulation-based analyses as well as experimental verification.Due to the ultrahigh electrical performance requirements imposed on the QPS by the Comprehensive Research Facility for Fusion Technology(CRAFT),three main issues must be considered:the voltage-balancing problem caused by multiple thyristors in a series structure,the increased junction temperature problem caused by extremely high currents,and the reverse recovery phenomenon that arises from the thyristor’s physical structure.Hence,a series of detailed theoretical analyses,simulations,and experiments,including a thyristor junction temperature prediction method and reverse recovery process modeling,were carried out to optimize the design.Finally,the reliability and stability of the thyristor stack were verified by a series of prototype experiments.The results confirmed the correctness and accuracy of the proposed thyristor stack design method and also indicated that the proposed thyristor stack can meet the application conditions of a 100 k A QPS in the CRAFT project.展开更多
A central solenoid model coil will be set up to develop and verify the technique for the full-size central solenoid coil of the China Fusion Engineering Test Reactor.In case of quench and failures of superconducting c...A central solenoid model coil will be set up to develop and verify the technique for the full-size central solenoid coil of the China Fusion Engineering Test Reactor.In case of quench and failures of superconducting coils,the quench protection(QP)system,which employs fuse-based commutation technology,is designed.This paper presents an analytical model to investigate the commutation process in the QP circuit.The model consists of the QP circuit equations,the breaker arc model,the fuse pre-arc model,and the fuse arc model.The model is employed in the whole commutation process including current transfer from breaker branch to the fuse branch model,then from fuse branch to the discharge resistor branch,and current decrease to zero in the discharge resistor.The experiment result verified the effectiveness of the presented model.The model might be helpful for design of the fuse and optimization of the commutation circuit.展开更多
The booming electronics itself carries an impact on power quality. Superconducting Magnetic Energy Storage (SMES) is proposed to enhance power quality in three-phase systems under various loads. This paper aimed to co...The booming electronics itself carries an impact on power quality. Superconducting Magnetic Energy Storage (SMES) is proposed to enhance power quality in three-phase systems under various loads. This paper aimed to compensate the voltage sags under various faults in the grid systems. The SMES is selected as an energy storage unit to improve the capability of voltage sag compensation. Optimized Dual Fuzzy Flow (ODFF) logic controller is designed to prevent the voltage sag time during excessive phase voltage variation. Hence the proposed controller strategy reduces the total harmonic distortion during various fault conditions. To regulate the contribution of active power, the least possible value is improved using ODFF. The depth of voltage sags compensation is achieved by the over modulation and an iterative loop is designed in the control block. While protecting sensitive loads from voltage disturbances, and sags initiated by the power system, the proposed configuration is advantageous for an industrial implementation. It is found that the proposed method can result in more than 50% additional sag support time when compared with the previous methods such as PI and PSO. Utilizing MATLAB Simulink, compensation of sag and minimization of THD is established, and the simulation tests are performed to evaluate the performance of the proposed control method.展开更多
A superconducting magnet(SM)can produce high magnetic fields up to a dozen times stronger than those generated by an electromagnet made of normal conductors or a permanent magnet(PM),and thus has attracted increasing ...A superconducting magnet(SM)can produce high magnetic fields up to a dozen times stronger than those generated by an electromagnet made of normal conductors or a permanent magnet(PM),and thus has attracted increasing research efforts in many domains including medical devices,large scientific equipment,transport,energy storage,power systems,and electric machines.Wireless energisers,e.g.,high temperature superconducting(HTS)flux pumps,can eliminate the thermal load from current leads and arc erosion of slip rings,and are thus considered a promising energisation tool for SMs.However,the time‐averaged DC output voltage in existing HTS flux pumps is generated by dynamic resistance:the dynamic loss is unavoidable,and the total AC loss will become significant at high frequencies.This study introduces a highly efficient superconducting wireless energizer(SWE)designed specifically for SMs.The SWE takes advantage of the inherent properties of a superconducting loop,including flux conservation and zero DC resistivity.Extensive theoretical analysis,numerical modelling exploiting the H‐ϕformulation,and experimental measurements were conducted to demonstrate the efficiency and efficacy of the novel SWE design.The electromechanical performance and loss characteristics of the SWE system have also been investigated.Compared to conventional HTS flux pumps,the proposed SWE has lower excitation loss,in the order of 10−1 mW,and thus can achieve a high system efficiency of no less than 95%.Furthermore,it has a simpler structure with higher reliability,considered ready for further industrial development.In addition to deepening the understating of the intricate electromechanical dynamics between magnetic dipoles and superconducting circuits,this article provides a novel wireless energisation technique for SMs and opens the way to step changes in future electric transport and energy sectors.展开更多
A 10‐MJ‐class superconducting magnetic energy storage(SMES)magnet is designed and optimized in this study using quasi‐isotropic strands and stacked‐tape conductors.In order to ensure the stable operation of SMES s...A 10‐MJ‐class superconducting magnetic energy storage(SMES)magnet is designed and optimized in this study using quasi‐isotropic strands and stacked‐tape conductors.In order to ensure the stable operation of SMES systems,it is necessary to evaluate the mechanical properties risk caused by the Lorentz force.Therefore,in this study,the magnetic stress caused by the Lorentz force is analyzed using the finite element method.The results show that the tapes near the inner diameter of the magnet are subjected to a higher stress and require considerable support.Although the maximum stress is increased by two times due to the presence of the screening current,it is within the safety range.The screening current does not vanish after the discharge process.After discharge,the coil is still subjected to a stress on the other of a few MPa.展开更多
An autonomous microgrid that runs on renewable energy sources is presented in this article.It has a supercon-ducting magnetic energy storage(SMES)device,wind energy-producing devices,and an energy storage battery.Howe...An autonomous microgrid that runs on renewable energy sources is presented in this article.It has a supercon-ducting magnetic energy storage(SMES)device,wind energy-producing devices,and an energy storage battery.However,because such microgrids are nonlinear and the energy they create varies with time,controlling and managing the energy inside them is a difficult issue.Fractional-order proportional integral(FOPI)controller is recommended for the current research to enhance a standalone microgrid’s energy management and performance.The suggested dedicated control for the SMES comprises two loops:the outer loop,which uses the FOPI to regulate the DC-link voltage,and the inner loop,responsible for regulating the SMES current,is constructed using the intelligent FOPI(iFOPI).The FOPI+iFOPI parameters are best developed using the dandelion optimizer(DO)approach to achieve the optimum performance.The suggested FOPI+iFOPI controller’s performance is contrasted with a conventional PI controller for variations in wind speed and microgrid load.The optimal FOPI+iFOPI controller manages the voltage and frequency of the load.The behavior of the microgrid as a reaction to step changes in load and wind speed was measured using the proposed controller.MATLAB simulations were used to evaluate the recommended system’s performance.The results of the simulations showed that throughout all interruptions,the recommended microgrid provided the load with AC power with a constant amplitude and frequency.In addition,the required load demand was accurately reduced.Furthermore,the microgrid functioned incredibly well despite SMES and varying wind speeds.Results obtained under identical conditions were compared with and without the best FOPI+iFOPI controller.When utilizing the optimal FOPI+iFOPI controller with SMES,it was found that the microgrid performed better than the microgrid without SMES.展开更多
With high penetration of renewable energy sources(RESs)in modern power systems,system frequency becomes more prone to fluctuation as RESs do not naturally have inertial properties.A conventional energy storage system(...With high penetration of renewable energy sources(RESs)in modern power systems,system frequency becomes more prone to fluctuation as RESs do not naturally have inertial properties.A conventional energy storage system(ESS)based on a battery has been used to tackle the shortage in system inertia but has low and short-term power support during the disturbance.To address the issues,this paper proposes a new synthetic inertia control(SIC)design with a superconducting magnetic energy storage(SMES)system to mimic the necessary inertia power and damping properties in a short time and thereby regulate the microgrid(µG)frequency during disturbances.In addition,system frequency deviation is reduced by employing the proportional-integral(PI)controller with the proposed SIC system.The efficacy of the proposed SIC system is validated by comparison with the conventional ESS and SMES systems without using the PI controller,under various load/renewable perturbations,nonlinearities,and uncertainties.The simulation results highlight that the proposed system with SMES can efficiently manage several disturbances and high system uncertainty compared to the conventional ESS and SMES systems,without using the PI controller.展开更多
Objective High Energy Photon Source-Test Facility(HEPS-TF)is a pre-research project for the construction of high energy synchrotron radiation source in the 12th five-year plan period.The purpose is to research the key...Objective High Energy Photon Source-Test Facility(HEPS-TF)is a pre-research project for the construction of high energy synchrotron radiation source in the 12th five-year plan period.The purpose is to research the key technology and develop the key equipment of high energy synchrotron radiation source.Superconducting 3W1 magnet is the first self-developed superconducting wiggler magnet in China,and it is also one of the key research topics of HEPS.The author has completed a new digital closed-loop control algorithm for the superconducting 3W1 magnet with large load time constant and the nonlinear characteristics of inductance increasing with current,namely three-branch structure algorithm.In the face of the rapid development of high energy accelerator technology,the application of intelligent technology has become an inevitable development trend in the field of accelerator magnet power supply technology.Although the digital control of accelerator magnet power supply has been widely used,it is the first time to apply the new closed-loop control algorithm to realize fast adjustment and precision tracking in accelerator superconducting magnet power supply in China.Method According to the nonlinear characteristics of inductance and output current of superconducting magnet,a new digital closed-loop control algorithm for the load of superconducting magnet power supply with large time constant is proposed.Conclusion This algorithm is quite different from the traditional algorithm and can attain the independent tracking and adjust-ment of the control target.Finally,by testing the ripple,error and stability of superconducting 3W1 magnet power supply,the correctness,practicability and reliability of power supply system as well as the digital control algorithm are verified.The results provide a new idea for the control of accelerator magnet power supply.展开更多
Purpose This paper describes the design of power supply system for superconducting wiggler in the project of high energy photon source-test facility.It includes three sets of high precision DC stabilized current power...Purpose This paper describes the design of power supply system for superconducting wiggler in the project of high energy photon source-test facility.It includes three sets of high precision DC stabilized current power supplies for superconducting magnet excitation and three sets of quench protection assembly(QPA).A special magnetic load which has a very large time constant is studied in this paper.In this paper,a stable superconducting excitation power supply is developed,which can adjust the response quickly under the condition of very large load time constant.Meanwhile,the energy dissipation circuit of the QPA is integrated into the power supply in an active quenching protection mode to accelerate the energy release of the superconducting magnet and protect the superconducting magnet.Method The main circuit topology,control algorithm,quenching protection circuit and interlocking logic function are designed for the superconducting magnet with large inductance.The upper computer controls the switch of the three main power circuits through the serial port,sets the output current and adjusts the parameters according to the load.Conclusion Through a series of scientific and rigorous experiments,the rationality of superconducting wiggler magnet power supply scheme is demonstrated.The output current stability test and output voltage ripple test of the power supply meet or exceed the requirements of the magnet system.展开更多
China’s first 35 kJ high temperature superconducting magnetic energy storage(SMES)system with an experiment equipment was depicted.The dynamic heat analysis of the magnet of the SMES was conducted through the current...China’s first 35 kJ high temperature superconducting magnetic energy storage(SMES)system with an experiment equipment was depicted.The dynamic heat analysis of the magnet of the SMES was conducted through the current load test on the directly cooled conduction magnet.The research results were as follows:when the converter charges and discharges the magnet for energy storage,the hysteresis loss is the main part of power loss,and contributes significantly to temperature rise;reducing the current frequency at the side of direct current is conducive to restraining temperature rise.The optimizing factors of the cool-guide structure were analyzed based on the heat stability theory,and it was found that the heat transfer of its key part(at the top of the magnet)must be strengthened to reduce the axial temperature difference of the magnet.展开更多
基金the National Natural Science Foundation of China(Nos.11932008 and 11672120)the Fundamental Research Funds for the Central Universities of China(No.lzujbky-2022-kb01)。
文摘A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.
文摘Aconduction-cooled superconducting magnet with central field of 10Tand warmbore of 100 mmwas designed based on a Nb3Sn and two NbTi superconducting coils.At the first stage,the NbTi coils havebeen fabricated andtested.Atwo-stage 4 KGifford-McMahon(GM) cryocooler withthe second-stage powerin1W,4.2Kis used to cool the magnet fromroomtemperature to 4 K.The superconducting magnet with thesame power supply has the operating current of 116A.The magnet can be rotated with a support frame to beoperated with either horizontal or vertical position.Apair of Bi-2223 hightemperature superconductingcurrentleads was employedto reduce heat leakage into 4.2Klevel.The NbTi coils reachto the operating current of120Awithout training effect to be observed duringchargingof the magnet during40 minutes chargingtime andgenerate the center field of 6.5T.The training effect inthe NbTi magnet directly cool-down by cryocooler andinter-winding support structure in magnet can be remarkablyimproved.The superconducting magnet has beenstably operatedfor more than 275 hours with 6.5T.In this paper,the detailed design,fabrication,stressanalysis and quench protection characteristics are presented.
基金Project supported by the National Natural Science Foundation of China(Nos.11932008 and 12272156)the Fundamental Research Funds for the Central Universities(No.lzujbky-2022-kb06)+1 种基金the Gansu Science and Technology ProgramLanzhou City’s Scientific Research Funding Subsidy to Lanzhou University of China。
文摘Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.
基金supported by the National Natural Science Foundation of China(No.51807128)。
文摘Unpredictable power fluctuation and fault ridethrough capability attract increased attention as two uncertain major factors in doubly-fed induction generators(DFIGs)integrated DC power system.Present solutions usually require complicated cooperation comprising multiple modules of energy storage,current control,and voltage stabilizer.To overcome the drawbacks of existing solutions,this paper proposes a superconducting magnetic energy storage(SMES)integrated currentsource DC/DC converter(CSDC).It is mainly composed of a current-source back-to-back converter,and the SMES is tactfully embedded in series with the intermediate DC link.The proposed SMES-CSDC is installed in front of the DC-DFIG to carry out its dual abilities of load voltage stabilization under multifarious transient disturbances and power regulation under wind speed variations.Compared with the existing DC protection devices,the SMES-CSDC is designed on the basis of unique current-type energy storage.It has the advantages of fast response,extensive compensation range,concise hardware structure,and straightforward control strategy.The feasibility of the SMESCSDC is implemented via a scaled-down experiment,and its effectiveness for DC-DFIG protection is verified by a large-scale DC power system simulation.
基金This work is funded by the Magnetic Resonance Union of the Chinese Academy of Sciences(Grant No.2021gzl002)the International Partnership Program of Chinese Academy of Sciences(Grant No.182111KYSB20210014)+1 种基金the National Science Foundation of China(Grant No.52293423,Grant No.52277031)the Research and Development of Key Technologies and Equipment for Major Science and Technology Infrastructure of Development and Reform Commission of Shenzhen Municipality,China(Grant No.ZDKJ20190305002).
文摘The relatively fragile low-temperature stability of cryogen-free superconducting magnetic resonance imaging(MRI)magnets requires the careful management of exogenous heat sources.A strongly shielded gradient magnetic field is important for the optimal operation of cryogen-free MRI systems.In this study,we present an enhanced shielding method incorporating a regionalized stray field constraining strategy.By optimizing the constraint parameters,we could develop engineering-feasible gradient coil schemes without increasing system complexity but with the stray field intensity reduced by half.In real measurement in an integrated MRI system,the developed gradient assembly demonstrated good performance and supported to output images of excellent quality.Our findings suggested that the proposed method could potentially form a useful design paradigm for cryogen-free MRI magnets.
基金This work was supported in part by the National Natural Science Foundation of China under Grant No.51807128State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources under Grant No.LAPS20017.
文摘The fast-response feature from a superconducting magnetic energy storage(SMES)device is favored for suppressing instantaneous voltage and power fluctuations,but the SMES coil is much more expensive than a conventional battery energy storage device.In order to improve the energy utilization rate and reduce the energy storage cost under multiple-line power distribution conditions,this paper investigates a new interline DC dynamic voltage restorer(IDC-DVR)scheme with one SMES coil shared among multiple compensating circuits.In this new concept,an improved current-voltage(I/V)chopper assembly,which has a series of input/output power ports,is introduced to connect the single SMES coil with multiple power lines,and thereby satisfy the independent energy exchange requirements of any line to be compensated.Specifically,if two or more power lines have simultaneous compensating demands,the SMES coil can be selectively controlled to compensate the preferable line according to the priority order of the line.The feasibility of the proposed scheme is technically verified to maintain the transient voltage stability in multiple-line voltage swell and sag cases caused by either output voltage fluctuations from external power sources or power demand fluctuations from local sensitive loads.The simulation results provide a technical basis to develop a cost-effective SMES-based IDC-DVR for use in various DC distribution networks.
文摘Purpose As the world energetic demand is increasing day by day,the development of nuclear energy is of great necessity.However,the development is followed by a lot of tough questions like the management and storage of the nuclear waste.ADS,which is short for the accelerator-driven sub-critical system,may be a good choice because it can provide an efficient transmutations of nuclear waste.Many countries have carried out some research in related areas like the USA,Japan and China.The superconducting magnet system The cryomodule I(CM1)for China’s ADS Injection-I had been designed,fabricated and online tested.The CM1 is mainly composed of superconducting spoke cavities,beam positionmonitors,cryogenic system and superconducting magnets.The superconducting magnet system,which includes the magnet and current leads,is aimed at focusing and correcting the proton beams.Conclusion Seven superconducting magnets and current leads for CM1 are successfully designed and manufactured.Structural strength meets design specifications,the field meets the design demands,and the online test shows that the magnets can work in a rather stable state.In this paper,the detailed design and installation of the superconducting magnets are presented.
基金financial support from the Joint Fund (Key program U2067201) for Nuclear Technology Innovation Sponsored by the National Natural Science Foundation of China and the China National Nuclear CorporationNational key research and development program (2019YFC1907702) Sponsored by MOSTthe Fundamental Research Funds for the Central Universities (N2001013) for supporting this research。
文摘To achieve the utilization of the abandoned ultrafine ilmenite(-20 μm) produced in the titanium magnetite processing plant in Panzhihua,the superconducting high-gradient magnetic separation(SMS) technology was proposed in this study.After optimizing the conditions of magnetic intensity,feeding and pulsation,an SMS concentrate with TiO_(2) grade of 16.03% and TiO_(2) recovery of 66.39% was obtained through one roughing-one cleaning pre-concentration flowsheet.The specific magnetic force and magnetic force were calculated and analysed to illustrate the pre-concentration mechanism,and the results revealed that the combination of high magnetic field and strong pulsating resulted in the effective preconcentration of the ultrafine ilmenite in the SMS process.In addition,the magnetic force analysis indicated that the high magnetic intensity and high magnetic gradient are the key factors of the SMS technology.Furthermore,the EDS-Mapping detection certified that the ultrafine ilmenite was concentrated from the gangue minerals using SMS technology.
文摘Highly textured (Bi,Pb)2Sr2Ca2Cu3Ox superconducting tapes have been fabricated by means of magnetic-field and vibration technique. This method is an effective way of improving the degree of grain alignment and density of oxide core in tapes after heat treatment and pressing cycles.Jc of above 20% was increased than that without treatment.
文摘A method is described for creating a measurable unbalanced gravitational acceleration using a gravitomagnetic field surrounding a superconducting toroid as described by Forward (1962). An experimental Superconducting Magnetic Energy Storage (SMES) toroid configuration of wound superconducting nanowire is proposed to create a measurable acceleration field along the axis of symmetry, providing experimental confirmation of the additive nature of a Lense-Thirring derived gravitomagnetic field. In the present paper, gravitational coupling enhancement of this effect is explored using a high index or high permittivity material, as predicted by Sarfatti (2020) using his modification to Einstein’s General Relativity Field Equations for gravitational coupling in matter.
基金supported by National Key Research and Development Program of China(Nos.2017YFE0300504 and 2017YFE0300500)the Comprehensive Research Facility for the Fusion Technology Program of China(No.2018000052-73-01-001228)。
文摘Thyristors have longer lifetimes,higher reliability,and very high voltage and current ratings and they require less maintenance than other high-power semiconductor devices.As a result,they are particularly suitable for quench protection systems(QPSs),which protect the superconducting magnets in large fusion devices from damage.In this paper,we propose a design for a 100 k A/10 k V thyristor stack supported by both theoretical and simulation-based analyses as well as experimental verification.Due to the ultrahigh electrical performance requirements imposed on the QPS by the Comprehensive Research Facility for Fusion Technology(CRAFT),three main issues must be considered:the voltage-balancing problem caused by multiple thyristors in a series structure,the increased junction temperature problem caused by extremely high currents,and the reverse recovery phenomenon that arises from the thyristor’s physical structure.Hence,a series of detailed theoretical analyses,simulations,and experiments,including a thyristor junction temperature prediction method and reverse recovery process modeling,were carried out to optimize the design.Finally,the reliability and stability of the thyristor stack were verified by a series of prototype experiments.The results confirmed the correctness and accuracy of the proposed thyristor stack design method and also indicated that the proposed thyristor stack can meet the application conditions of a 100 k A QPS in the CRAFT project.
文摘A central solenoid model coil will be set up to develop and verify the technique for the full-size central solenoid coil of the China Fusion Engineering Test Reactor.In case of quench and failures of superconducting coils,the quench protection(QP)system,which employs fuse-based commutation technology,is designed.This paper presents an analytical model to investigate the commutation process in the QP circuit.The model consists of the QP circuit equations,the breaker arc model,the fuse pre-arc model,and the fuse arc model.The model is employed in the whole commutation process including current transfer from breaker branch to the fuse branch model,then from fuse branch to the discharge resistor branch,and current decrease to zero in the discharge resistor.The experiment result verified the effectiveness of the presented model.The model might be helpful for design of the fuse and optimization of the commutation circuit.
文摘The booming electronics itself carries an impact on power quality. Superconducting Magnetic Energy Storage (SMES) is proposed to enhance power quality in three-phase systems under various loads. This paper aimed to compensate the voltage sags under various faults in the grid systems. The SMES is selected as an energy storage unit to improve the capability of voltage sag compensation. Optimized Dual Fuzzy Flow (ODFF) logic controller is designed to prevent the voltage sag time during excessive phase voltage variation. Hence the proposed controller strategy reduces the total harmonic distortion during various fault conditions. To regulate the contribution of active power, the least possible value is improved using ODFF. The depth of voltage sags compensation is achieved by the over modulation and an iterative loop is designed in the control block. While protecting sensitive loads from voltage disturbances, and sags initiated by the power system, the proposed configuration is advantageous for an industrial implementation. It is found that the proposed method can result in more than 50% additional sag support time when compared with the previous methods such as PI and PSO. Utilizing MATLAB Simulink, compensation of sag and minimization of THD is established, and the simulation tests are performed to evaluate the performance of the proposed control method.
文摘A superconducting magnet(SM)can produce high magnetic fields up to a dozen times stronger than those generated by an electromagnet made of normal conductors or a permanent magnet(PM),and thus has attracted increasing research efforts in many domains including medical devices,large scientific equipment,transport,energy storage,power systems,and electric machines.Wireless energisers,e.g.,high temperature superconducting(HTS)flux pumps,can eliminate the thermal load from current leads and arc erosion of slip rings,and are thus considered a promising energisation tool for SMs.However,the time‐averaged DC output voltage in existing HTS flux pumps is generated by dynamic resistance:the dynamic loss is unavoidable,and the total AC loss will become significant at high frequencies.This study introduces a highly efficient superconducting wireless energizer(SWE)designed specifically for SMs.The SWE takes advantage of the inherent properties of a superconducting loop,including flux conservation and zero DC resistivity.Extensive theoretical analysis,numerical modelling exploiting the H‐ϕformulation,and experimental measurements were conducted to demonstrate the efficiency and efficacy of the novel SWE design.The electromechanical performance and loss characteristics of the SWE system have also been investigated.Compared to conventional HTS flux pumps,the proposed SWE has lower excitation loss,in the order of 10−1 mW,and thus can achieve a high system efficiency of no less than 95%.Furthermore,it has a simpler structure with higher reliability,considered ready for further industrial development.In addition to deepening the understating of the intricate electromechanical dynamics between magnetic dipoles and superconducting circuits,this article provides a novel wireless energisation technique for SMs and opens the way to step changes in future electric transport and energy sectors.
基金supported in part by the National Natural Science Foundation of China under Grant No.51977078.
文摘A 10‐MJ‐class superconducting magnetic energy storage(SMES)magnet is designed and optimized in this study using quasi‐isotropic strands and stacked‐tape conductors.In order to ensure the stable operation of SMES systems,it is necessary to evaluate the mechanical properties risk caused by the Lorentz force.Therefore,in this study,the magnetic stress caused by the Lorentz force is analyzed using the finite element method.The results show that the tapes near the inner diameter of the magnet are subjected to a higher stress and require considerable support.Although the maximum stress is increased by two times due to the presence of the screening current,it is within the safety range.The screening current does not vanish after the discharge process.After discharge,the coil is still subjected to a stress on the other of a few MPa.
基金This research was funded by the Deputyship for Research and Innovation,Ministry of Education,Saudi Arabia,through the University of Tabuk,Grant Number S-1443-0123.
文摘An autonomous microgrid that runs on renewable energy sources is presented in this article.It has a supercon-ducting magnetic energy storage(SMES)device,wind energy-producing devices,and an energy storage battery.However,because such microgrids are nonlinear and the energy they create varies with time,controlling and managing the energy inside them is a difficult issue.Fractional-order proportional integral(FOPI)controller is recommended for the current research to enhance a standalone microgrid’s energy management and performance.The suggested dedicated control for the SMES comprises two loops:the outer loop,which uses the FOPI to regulate the DC-link voltage,and the inner loop,responsible for regulating the SMES current,is constructed using the intelligent FOPI(iFOPI).The FOPI+iFOPI parameters are best developed using the dandelion optimizer(DO)approach to achieve the optimum performance.The suggested FOPI+iFOPI controller’s performance is contrasted with a conventional PI controller for variations in wind speed and microgrid load.The optimal FOPI+iFOPI controller manages the voltage and frequency of the load.The behavior of the microgrid as a reaction to step changes in load and wind speed was measured using the proposed controller.MATLAB simulations were used to evaluate the recommended system’s performance.The results of the simulations showed that throughout all interruptions,the recommended microgrid provided the load with AC power with a constant amplitude and frequency.In addition,the required load demand was accurately reduced.Furthermore,the microgrid functioned incredibly well despite SMES and varying wind speeds.Results obtained under identical conditions were compared with and without the best FOPI+iFOPI controller.When utilizing the optimal FOPI+iFOPI controller with SMES,it was found that the microgrid performed better than the microgrid without SMES.
文摘With high penetration of renewable energy sources(RESs)in modern power systems,system frequency becomes more prone to fluctuation as RESs do not naturally have inertial properties.A conventional energy storage system(ESS)based on a battery has been used to tackle the shortage in system inertia but has low and short-term power support during the disturbance.To address the issues,this paper proposes a new synthetic inertia control(SIC)design with a superconducting magnetic energy storage(SMES)system to mimic the necessary inertia power and damping properties in a short time and thereby regulate the microgrid(µG)frequency during disturbances.In addition,system frequency deviation is reduced by employing the proportional-integral(PI)controller with the proposed SIC system.The efficacy of the proposed SIC system is validated by comparison with the conventional ESS and SMES systems without using the PI controller,under various load/renewable perturbations,nonlinearities,and uncertainties.The simulation results highlight that the proposed system with SMES can efficiently manage several disturbances and high system uncertainty compared to the conventional ESS and SMES systems,without using the PI controller.
基金the Accelerator Centre of Insti-tute of High Energy Physics for financial support
文摘Objective High Energy Photon Source-Test Facility(HEPS-TF)is a pre-research project for the construction of high energy synchrotron radiation source in the 12th five-year plan period.The purpose is to research the key technology and develop the key equipment of high energy synchrotron radiation source.Superconducting 3W1 magnet is the first self-developed superconducting wiggler magnet in China,and it is also one of the key research topics of HEPS.The author has completed a new digital closed-loop control algorithm for the superconducting 3W1 magnet with large load time constant and the nonlinear characteristics of inductance increasing with current,namely three-branch structure algorithm.In the face of the rapid development of high energy accelerator technology,the application of intelligent technology has become an inevitable development trend in the field of accelerator magnet power supply technology.Although the digital control of accelerator magnet power supply has been widely used,it is the first time to apply the new closed-loop control algorithm to realize fast adjustment and precision tracking in accelerator superconducting magnet power supply in China.Method According to the nonlinear characteristics of inductance and output current of superconducting magnet,a new digital closed-loop control algorithm for the load of superconducting magnet power supply with large time constant is proposed.Conclusion This algorithm is quite different from the traditional algorithm and can attain the independent tracking and adjust-ment of the control target.Finally,by testing the ripple,error and stability of superconducting 3W1 magnet power supply,the correctness,practicability and reliability of power supply system as well as the digital control algorithm are verified.The results provide a new idea for the control of accelerator magnet power supply.
文摘Purpose This paper describes the design of power supply system for superconducting wiggler in the project of high energy photon source-test facility.It includes three sets of high precision DC stabilized current power supplies for superconducting magnet excitation and three sets of quench protection assembly(QPA).A special magnetic load which has a very large time constant is studied in this paper.In this paper,a stable superconducting excitation power supply is developed,which can adjust the response quickly under the condition of very large load time constant.Meanwhile,the energy dissipation circuit of the QPA is integrated into the power supply in an active quenching protection mode to accelerate the energy release of the superconducting magnet and protect the superconducting magnet.Method The main circuit topology,control algorithm,quenching protection circuit and interlocking logic function are designed for the superconducting magnet with large inductance.The upper computer controls the switch of the three main power circuits through the serial port,sets the output current and adjusts the parameters according to the load.Conclusion Through a series of scientific and rigorous experiments,the rationality of superconducting wiggler magnet power supply scheme is demonstrated.The output current stability test and output voltage ripple test of the power supply meet or exceed the requirements of the magnet system.
基金supported by the Hi-Tech Research and Development Program of China (No.2002AA306331-4)the National Natural Science Foundation of China (Grant No.51076013)the Research Fund for the Doctoral Program of Higher Education of China (No.200040487039).
文摘China’s first 35 kJ high temperature superconducting magnetic energy storage(SMES)system with an experiment equipment was depicted.The dynamic heat analysis of the magnet of the SMES was conducted through the current load test on the directly cooled conduction magnet.The research results were as follows:when the converter charges and discharges the magnet for energy storage,the hysteresis loss is the main part of power loss,and contributes significantly to temperature rise;reducing the current frequency at the side of direct current is conducive to restraining temperature rise.The optimizing factors of the cool-guide structure were analyzed based on the heat stability theory,and it was found that the heat transfer of its key part(at the top of the magnet)must be strengthened to reduce the axial temperature difference of the magnet.
