By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant p...By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant properties(PUA/DOPO-N)was prepared.In addition,organically modified montmorillonite(OMMT)and magnesium hydroxide(MH)were used as co-effectors respectively,and the flame retardant PUA(PUA/DOPO-N/OMMT and PUA/DOPO-N/MH)were also prepared.Thermal properties,flame retardant properties,flame retardant mechanism and mechanical properties of PUA/DOPO-N,PUA/DOPO-N/OMMT and PUA/DOPO-N/MH were investigated by thermogravimetric(TG)analysis,limiting oxygen index(LOI),UL 94,cone calorimeter test,scanning electron microscopy(SEM),and tensile test.The results show that the LOI value of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are 27.1%,27.7%,and 28.3%,respectively,and UL 94 V-0 rating is attained.Compared with PUA,the peak heat release rate(pk-HRR),total heat release(THR)and average effective heat combustion(av-EHC)of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH decrease significantly.SEM results indicate that the residual chars of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are completer and more compact.The complex of DOPO-N/OMMT and DOPO-N/MH have synergistic flame retardancy.The mechanical properties of PUA can be improved by the addition of DOPO-N,DOPO-N/OMMT and DOPO-N/MH,respectively.The insulation performance test shows that the volume resistivity of PUA/20%DOPO-N is 6.25×10^(16)Ω.cm.Furthermore,by using modified boron nitride(MBN)as heat dissipating material,the complex of PUA/MBN was prepared,and the thermal conductivity of PUA/MBN was investigated.The thermal conductivity of PUA/8%MBN complex coating at room temperature is 0.166 W/(M·K),which is a 163%improvement over pure PUA.展开更多
Metal hydroxides （MAH） consisting of magnesium hydroxide and aluminum hydroxide with a mass ratio of 1：2 were surface-modified by y-diethoxyphosphorous ester propyldiethoxymethylsilane, boric acid and diphenylsilan...Metal hydroxides （MAH） consisting of magnesium hydroxide and aluminum hydroxide with a mass ratio of 1：2 were surface-modified by y-diethoxyphosphorous ester propyldiethoxymethylsilane, boric acid and diphenylsilanediol in xylene under dibutyl tin dilaurate catalyst at 140 ℃. Phosphorus, silicon and boron elements covalently bonded to metal hydroxide particles were detected by X-ray photoelectron spectroscopy. The degradation behavior of the surface-modified MAH was characterized by thermogravimetric analysis. The results show that linear low density polyethylene （LLDPE） composite, filled with 50% （mass fraction） of MAH modified by 5.0% （mass fraction） of modifiers, passes the V-0 rating of UL-94 test and shows the limited oxygen index of 34%, and its heat release rate and average effective heat combustion in a cone calorimeter measurement decrease obviously; The mechanical properties of MAH can be improved by surface-modification. The uniform dispersion of particles and strong interfacial bonding between particles and matrix are obtained.展开更多
The flame-retardant properties of polyurethane(PU)containing ammonium polyphosphate(APP)and aluminum hydroxide(ATH)were investigated.Moreover,the flame retardant performance was investigated through thermogravimetric ...The flame-retardant properties of polyurethane(PU)containing ammonium polyphosphate(APP)and aluminum hydroxide(ATH)were investigated.Moreover,the flame retardant performance was investigated through thermogravimetric analysis,limiting oxygen index(LOI),vertical combustion(UL 94),and cone calorimeter.When 15 wt%APP and 5 wt%ATH were added together,the PU/15%APP/5%ATH sample shows better thermal stability and flame-retardant properties.When 15 wt%APP and 5 wt%ATH were added together,the LOI value of the PU/15%APP/5%ATH sample was 30.5%,and UL 94 V-0 rating was attained.Compared with PU,the peak heat release rate(PHRR),total heat release(THR),and average effective heat combustion(av-EHC)of the PU/15%APP/5%ATH sample decreased by 43.1%,21.0%,and 29.4%,respectively.In addition,the flame-retardant mechanism was investigated through cone calorimeter.The APP/ATH addition simultaneously exerted condensed phase and gas phase flame retardant effects.APP and ATH have synergistic flame retardant properties.展开更多
The most common process to manufacture advanced composites is the costly autoclave.One of the out-of-autoclave alternatives is the low-cost vacuum assisted resin infusion(VARI)which produces quality parts with less po...The most common process to manufacture advanced composites is the costly autoclave.One of the out-of-autoclave alternatives is the low-cost vacuum assisted resin infusion(VARI)which produces quality parts with less pollution.Epoxy resin is a widely used composite matrix resin,but its high flammability limits its use as interior composite parts for vehicles.The usual flame retardant for epoxy involves halogen,which is effective but has high smoke toxicity.As a result,halogen-free flame retardant epoxy resin systems become dominant.In this paper,phosphorus flame retardant was combined with benzoxazine(BOZ)to produce synergistic effect and achieve satisfactory flame retardance,as well as mechanical improvement for the epoxy resin.Differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),thermal gravitational analysis(TGA),the cone calorimeter(CC),and limiting oxygen index(LOI)were used to characterize the resins.The results showed significant improvement on the flame retardance of the synergistically modified resins.Specifically,the carbon residue increased by 113.6%,and the char thickness increased by 6 to 7 times,compared to those of the flammable benchmark resin.The LOI reached 33 and passed the UL94 V-0 vertical burn rating.The modified resins also exhibited adequate stability and viscosity suitable for VARI processes.展开更多
A nitrogen phosphorus synergistic flame retardant DCMA was synthesized frOm N-methylol acrylamide （NMA） and Diethyl Chlorophosphate （DC）. The reaction time and reaction mechanism were determined by tracking the re...A nitrogen phosphorus synergistic flame retardant DCMA was synthesized frOm N-methylol acrylamide （NMA） and Diethyl Chlorophosphate （DC）. The reaction time and reaction mechanism were determined by tracking the reaction process using ultraviolet spectrum.The cotton cloth finished with DCMA, by rolling baking process, when the flame retardant concentration from 10% to 30%.the smoldering time decreased from 3S to 1 S, carbon length decreased from 10.5 to 6.3, limiting oxygen index by 31 increased to 36.4.the tensile breaking strength of cotton fabric decreased from 6.46MPa to 3.12MPa.展开更多
Detrimental physical and mechanical properties are common pro-blems for composites when their flame retardancy is improved through filler additions.An increased interest of the synergistic nanoparticle addition to imp...Detrimental physical and mechanical properties are common pro-blems for composites when their flame retardancy is improved through filler additions.An increased interest of the synergistic nanoparticle addition to improve the flame retardancy of natural fiber composites is the aim of this work.The paper investigates the synergistic effect of two different nanoparticles(halloysite nano-tubes(HNTs)and montmorillonite(MMT)nanoclay)on the flame and mechanical properties in an intumescent ammonium poly-phosphate(APP)-based polypropylene(PP)/kenaf composite sys-tem.First,the nature of nanoparticle dispersion in PP through X-ray diffraction(XRD)and transmission electron microscopy(TEM)reveals that under twin screw compounding process,the partial exfoliation and intercalation have taken place within the nano-composites.An increase in the decomposition temperature was observed under thermogravimetric analysis(TGA),with the pre-sence of HNT.However,MMT tends to lower the maximum decomposition temperature under inert atmosphere.The flamm-ability analysis in an intumescent flame retardant(IFR)system shows that the suitable amount of high aspect ratio nanoparticles with their exfoliation characteristics effectively helps to reduce the sustained combustion.Even though,improved stiffness properties can be observed with the presence of increased filler content,particle agglomeration tends to reduce the mechanical strengths of these composites due to low compatibilization and crack propagation.展开更多
基金Funded by the Natural Science Foundation of Guangdong(Nos.2014A030313241,2014B090901068,and 2016A010103003)。
文摘By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant properties(PUA/DOPO-N)was prepared.In addition,organically modified montmorillonite(OMMT)and magnesium hydroxide(MH)were used as co-effectors respectively,and the flame retardant PUA(PUA/DOPO-N/OMMT and PUA/DOPO-N/MH)were also prepared.Thermal properties,flame retardant properties,flame retardant mechanism and mechanical properties of PUA/DOPO-N,PUA/DOPO-N/OMMT and PUA/DOPO-N/MH were investigated by thermogravimetric(TG)analysis,limiting oxygen index(LOI),UL 94,cone calorimeter test,scanning electron microscopy(SEM),and tensile test.The results show that the LOI value of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are 27.1%,27.7%,and 28.3%,respectively,and UL 94 V-0 rating is attained.Compared with PUA,the peak heat release rate(pk-HRR),total heat release(THR)and average effective heat combustion(av-EHC)of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH decrease significantly.SEM results indicate that the residual chars of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are completer and more compact.The complex of DOPO-N/OMMT and DOPO-N/MH have synergistic flame retardancy.The mechanical properties of PUA can be improved by the addition of DOPO-N,DOPO-N/OMMT and DOPO-N/MH,respectively.The insulation performance test shows that the volume resistivity of PUA/20%DOPO-N is 6.25×10^(16)Ω.cm.Furthermore,by using modified boron nitride(MBN)as heat dissipating material,the complex of PUA/MBN was prepared,and the thermal conductivity of PUA/MBN was investigated.The thermal conductivity of PUA/8%MBN complex coating at room temperature is 0.166 W/(M·K),which is a 163%improvement over pure PUA.
基金Project(20574020) supported by the National Natural Science Foundation of ChinaProject(20061001) supported by the Opening Project of the Key Laboratory of Polymer Processing Engineering, Ministry of Education, ChinaProject (20060106-2) supported by Guangdong Key Projects
文摘Metal hydroxides （MAH） consisting of magnesium hydroxide and aluminum hydroxide with a mass ratio of 1：2 were surface-modified by y-diethoxyphosphorous ester propyldiethoxymethylsilane, boric acid and diphenylsilanediol in xylene under dibutyl tin dilaurate catalyst at 140 ℃. Phosphorus, silicon and boron elements covalently bonded to metal hydroxide particles were detected by X-ray photoelectron spectroscopy. The degradation behavior of the surface-modified MAH was characterized by thermogravimetric analysis. The results show that linear low density polyethylene （LLDPE） composite, filled with 50% （mass fraction） of MAH modified by 5.0% （mass fraction） of modifiers, passes the V-0 rating of UL-94 test and shows the limited oxygen index of 34%, and its heat release rate and average effective heat combustion in a cone calorimeter measurement decrease obviously; The mechanical properties of MAH can be improved by surface-modification. The uniform dispersion of particles and strong interfacial bonding between particles and matrix are obtained.
基金Supported by the Natural Science Foundation of Guangdong(Nos.2014A030313241,2014B090901068,and 2016A010103003).
文摘The flame-retardant properties of polyurethane(PU)containing ammonium polyphosphate(APP)and aluminum hydroxide(ATH)were investigated.Moreover,the flame retardant performance was investigated through thermogravimetric analysis,limiting oxygen index(LOI),vertical combustion(UL 94),and cone calorimeter.When 15 wt%APP and 5 wt%ATH were added together,the PU/15%APP/5%ATH sample shows better thermal stability and flame-retardant properties.When 15 wt%APP and 5 wt%ATH were added together,the LOI value of the PU/15%APP/5%ATH sample was 30.5%,and UL 94 V-0 rating was attained.Compared with PU,the peak heat release rate(PHRR),total heat release(THR),and average effective heat combustion(av-EHC)of the PU/15%APP/5%ATH sample decreased by 43.1%,21.0%,and 29.4%,respectively.In addition,the flame-retardant mechanism was investigated through cone calorimeter.The APP/ATH addition simultaneously exerted condensed phase and gas phase flame retardant effects.APP and ATH have synergistic flame retardant properties.
文摘The most common process to manufacture advanced composites is the costly autoclave.One of the out-of-autoclave alternatives is the low-cost vacuum assisted resin infusion(VARI)which produces quality parts with less pollution.Epoxy resin is a widely used composite matrix resin,but its high flammability limits its use as interior composite parts for vehicles.The usual flame retardant for epoxy involves halogen,which is effective but has high smoke toxicity.As a result,halogen-free flame retardant epoxy resin systems become dominant.In this paper,phosphorus flame retardant was combined with benzoxazine(BOZ)to produce synergistic effect and achieve satisfactory flame retardance,as well as mechanical improvement for the epoxy resin.Differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),thermal gravitational analysis(TGA),the cone calorimeter(CC),and limiting oxygen index(LOI)were used to characterize the resins.The results showed significant improvement on the flame retardance of the synergistically modified resins.Specifically,the carbon residue increased by 113.6%,and the char thickness increased by 6 to 7 times,compared to those of the flammable benchmark resin.The LOI reached 33 and passed the UL94 V-0 vertical burn rating.The modified resins also exhibited adequate stability and viscosity suitable for VARI processes.
文摘A nitrogen phosphorus synergistic flame retardant DCMA was synthesized frOm N-methylol acrylamide （NMA） and Diethyl Chlorophosphate （DC）. The reaction time and reaction mechanism were determined by tracking the reaction process using ultraviolet spectrum.The cotton cloth finished with DCMA, by rolling baking process, when the flame retardant concentration from 10% to 30%.the smoldering time decreased from 3S to 1 S, carbon length decreased from 10.5 to 6.3, limiting oxygen index by 31 increased to 36.4.the tensile breaking strength of cotton fabric decreased from 6.46MPa to 3.12MPa.
基金This work was supported by the Ministry of Business,Innovation and Employment[(UOAX 1004)].
文摘Detrimental physical and mechanical properties are common pro-blems for composites when their flame retardancy is improved through filler additions.An increased interest of the synergistic nanoparticle addition to improve the flame retardancy of natural fiber composites is the aim of this work.The paper investigates the synergistic effect of two different nanoparticles(halloysite nano-tubes(HNTs)and montmorillonite(MMT)nanoclay)on the flame and mechanical properties in an intumescent ammonium poly-phosphate(APP)-based polypropylene(PP)/kenaf composite sys-tem.First,the nature of nanoparticle dispersion in PP through X-ray diffraction(XRD)and transmission electron microscopy(TEM)reveals that under twin screw compounding process,the partial exfoliation and intercalation have taken place within the nano-composites.An increase in the decomposition temperature was observed under thermogravimetric analysis(TGA),with the pre-sence of HNT.However,MMT tends to lower the maximum decomposition temperature under inert atmosphere.The flamm-ability analysis in an intumescent flame retardant(IFR)system shows that the suitable amount of high aspect ratio nanoparticles with their exfoliation characteristics effectively helps to reduce the sustained combustion.Even though,improved stiffness properties can be observed with the presence of increased filler content,particle agglomeration tends to reduce the mechanical strengths of these composites due to low compatibilization and crack propagation.
