Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fi...Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fillers inside the tubes to enhance heat transfer.This investigation considered the effects of twisted tapes with large holes on a tubular heat exchanger’s(HX)heat transmission,pressure drop,and thermal boosting factor.In the experimental section,counter-swirl flow generators used twisted tapes with pairs of 1.0 cm-diameter holes and changes in porosity(Rp)at 1.30%and 2.70%.In the experiments,air was utilized as a working fluid in a tube with a circular cross-section.The turbulent flow was considered,with Reynolds numbers(Re)domain from 4800 to 9500,and a boundary condition with a uniform wall heat flux was constructed.The findings expound that when the number of holes rose,the Nusselt number(Nu),the factor of friction(f),and the thermal enhancement factor(η)all increased as well.Additionally,as the friction factor increased,the Nusselt number of the tape-equipped tube was noticeably higher.Additionally,it was discovered that the friction factor was between 70%and 94%lower than the values of the tube without tape,while the(Nu)was between 87%and 97%higher than the conventional tube values.The maximum value ofηis 89%.According to the experimental results,empirical correlations for Nu,f,andηwere also generated.展开更多
Heteroconchia,a widespread and abundant aquatic invertebrate,is an important clade of bivalve mollusks.The relationship between the three branches of Heteroconchia,Palaeoheterodonta,Archiheterodonta,and Euheterodonta ...Heteroconchia,a widespread and abundant aquatic invertebrate,is an important clade of bivalve mollusks.The relationship between the three branches of Heteroconchia,Palaeoheterodonta,Archiheterodonta,and Euheterodonta has become a main controversy in molecular studies of the relationships between bivalves.In the present study,we assembled the complete mitochondrial genomes of Tapes dorsatus(Veneridae)and Cardita variegata(Carditidae)using high-throughput sequencing.C.variegata is the first mitochondrial genome belonging to the family Carditidae to be reported.We used 12 protein coding genes(excluding atp8)from the complete mitochondrial genomes of 146 species to recover the internal relationships of Heteroconchia.Our results support the traditional view of early branching of Palaeoheterodonta and the recovery of the monophyly of Palaeoheterodonta,Anomalodesmata,Imparidentia.Rearrangement analysis show that gene arrangement within Venerida was highly variable.Time-calibrated phylogenetic studies based on a relaxed molecular clock model suggested that Veneridae originated approximately 337.62 million years ago(Ma)and split into two major clades,whereas Carditidae originated approximately 510.09 Ma.Our results provide evidence of the internal relationships of Heteroconchia.展开更多
Cables composed of rare-earth barium copper oxide(REBCO)tapes have been extensively used in various superconducting devices.In recent years,conductor on round core(CORC)cable has drawn the attention of researchers wit...Cables composed of rare-earth barium copper oxide(REBCO)tapes have been extensively used in various superconducting devices.In recent years,conductor on round core(CORC)cable has drawn the attention of researchers with its outstanding current-carrying capacity and mechanical properties.The REBCO tapes are wound spirally on the surface of CORC cable.Under extreme loadings,the REBCO tapes with layered composite structures are vulnerable,which can lead to degradation of critical current and even quenching of superconducting devices.In this paper,we simulate the deformation of CORC cable under external loads,and analyze the damage inside the tape with the cohesive zone model(CZM).Firstly,the fabrication and cabling of CORC are simulated,and the stresses and strains generated in the tape are extracted as the initial condition of the next step.Then,the tension and bending loads are applied to CORC cable,and the damage distribution inside the tape is presented.In addition,the effects of some parameters on the damage are discussed during the bending simulations.展开更多
The thermal behavior of pipes with a twisted tape inside(used to enhance heat transfer through the tube wall)is studied in the laminar flow regime.Oil is used as the work fluid with the corresponding Reynolds Number s...The thermal behavior of pipes with a twisted tape inside(used to enhance heat transfer through the tube wall)is studied in the laminar flow regime.Oil is used as the work fluid with the corresponding Reynolds Number spanning the interval 200–2000.It is found that in such conditions the‘Nusselt Number’(Nu)gradually increases with reducing the tape twist ratio,whereas the friction factor is detrimentally affected by the presence of the tape(as witnessed by the comparison with the companion case where a plain tube is considered).In particular,it is shown that the heat transfer efficiency can be improved by nearly 69%if tape inserts with a relatively low twist ratio are used.On the basis of these findings,it is concluded that loose fit tape inserts are superior to tight fit tapes in terms of heat transfer and ease of replacement.展开更多
The thermo-hydraulic properties of circular tubes with a twisted tape inside(used accordingly to induce turbulence and enhance heat transfer through the tube wall)are described for Reynolds Numbers ranging from 830 to...The thermo-hydraulic properties of circular tubes with a twisted tape inside(used accordingly to induce turbulence and enhance heat transfer through the tube wall)are described for Reynolds Numbers ranging from 830 to 1990.Tapes twisted with the three distinct twist ratios are considered,namely,6,4.4 and 3.Air is used as the working fluid in several tests.For the sake of comparison,the standard tube with no insert is also examined.It is shown that in the presence of the twisted tape,the‘frictional factor’,‘Nusselt Number’and the‘thermal performance factor’are much higher than those obtained for the plain tube.Moreover,the tapes having the lowest twist ratio,i.e.,3,are more effective than the others in terms of heat transfer augmentation.The‘thermal performance factor’is greater than one for all the twisted tapes used in the experiments,which confirms the enhanced performances of the heat exchanger and the related savings in terms of total energy.展开更多
Heat transfer,friction factor and thermal enhancement factor characteristics of a double pipe heat exchanger fitted with square-cut twisted tapes（STT） and plain twisted tapes（PTT） are investigated experimentally u...Heat transfer,friction factor and thermal enhancement factor characteristics of a double pipe heat exchanger fitted with square-cut twisted tapes（STT） and plain twisted tapes（PTT） are investigated experimentally using the water as working fluid.The tapes（STT and PTT） have three twist ratios（y=2.0,4.4 and 6.0） and the Reynolds number ranges from 2000 to 12000.The experimental results reveal that heat transfer rate,friction factor and thermal enhancement factor in the tube equipped with STT are significantly higher than those fitted with PTT. The additional disturbance and secondary flow in the vicinity of the tube wall generated by STT are higher compared to that induced by the PTT is referred as the reason for better performance.Over the range considered,the Nusselt number,friction factor and thermal enhancement factor in a tube with STT are respectively,1.03 to 1.14,1.05 to 1.25 and 1.02 to 1.06 times of those in tube with PTT.An empirical correlation is also formulated to match with experimental data of Nusselt number and friction factor for STT and PTT.展开更多
Three kinds of silver-sheathed Bi(2223) oxide superconductor tapes (single-core tape, Ag-powder-added tape and multifilamentary type) were successfully prepared, namely, through the powder-in-tube method. The critical...Three kinds of silver-sheathed Bi(2223) oxide superconductor tapes (single-core tape, Ag-powder-added tape and multifilamentary type) were successfully prepared, namely, through the powder-in-tube method. The critical current density (Jc), the Jc-B characteristics, microstructures and the relation between Jc and strain of three kinds of tapes were evaluated and compared. The maximum Jc of three kinds of tapes at 77.7 K in zero magnetic field are 28700 A/cm2 for single-core tape, 20800 A/cm2 for Ag-powder-added tape, 11700 A/cm2 for multifilamentary tape. Single-core tapes exhibit high Jc values and good Jc-B characteristics.展开更多
The purpose of this paper is to demonstrate and investigate the concepts of new deployable boom systems, which consist of the BCON （braid coated bi-convex tape） boom and the SMA-BCON （braid coated bi-shape memory a...The purpose of this paper is to demonstrate and investigate the concepts of new deployable boom systems, which consist of the BCON （braid coated bi-convex tape） boom and the SMA-BCON （braid coated bi-shape memory alloy convex tape） boom. Both booms are developed for the deployable membrane structures such as solar sails, thin membrane solar array panels, deorbit mechanisms for small satellites and reflectors of space solar power satellite, etc. BCON booms can store around polygonal or cylindrical center hub, and the booms can deploy by the stepwise manner by releasing a constraint mechanism which pins the boons into two or three points for the total length. SMA-BCON booms are mainly developed for a square center body systems, and SMA is adapted on the bent po^nts of the booms where stored around each edge of the center hub. Through the deployment experiments of both booms, the stepwise deployment behavior and its tendency are obtained. The design concept of BCON boom and SMA-BCON hnnm i~ demonstrated through this study.展开更多
More and more attention is being focused on saline water utilization in irrigation due to the shortage of fresh water to agriculture in many regions. For purpose of reducing the risks of using of saline water for irri...More and more attention is being focused on saline water utilization in irrigation due to the shortage of fresh water to agriculture in many regions. For purpose of reducing the risks of using of saline water for irrigation, the mechanism of soil moisture and salinity distribution and transport should be well understood for developing optimum management strategies. In this paper, field experiments were carried out at Junggar Basin, China, to study the effects of drip irrigation water quality and drip tape arrangement on distribution of soil salinity and soil moisture. Six treatments were designed, including two drip tape arrangement modes and three irrigation water concentration levels （0.24, 4.68, and 7.42 dS m^-l）. Results showed that, soil moisture content （SMC） directly beneath the drip tape in all treatments kept a relatively high value about 18% before boll opening stage; the SMC in the narrow strip in single tape arrangement （Ms） plot was obviously lower than that in the double tapes arrangement （Md） plot, indicating that less sufficient water was supplied under the same condition of irrigation depth, but there was no significant reduction in yield. Mulching had not significant influence on salt accumulation but the drip tape arrangement, under the same condition of irrigation water depth and quality, compared with Md, Ms reduced salt accumulation in root zone and brought about relatively high cotton yield.展开更多
This paper deals with the experimental investigation on Nusselt number,friction factor and thermal en-hancement factor of a double pipe heat exchanger equipped with twisted tape consisting wire nails(WN-TT) and plain ...This paper deals with the experimental investigation on Nusselt number,friction factor and thermal en-hancement factor of a double pipe heat exchanger equipped with twisted tape consisting wire nails(WN-TT) and plain twisted tapes(P-TT) with three different twist ratios of y 2.0,4.4 and 6.0. Test runs are conducted using the water as the working fluid with Reynolds number range between 2000 and 12000 for WN-TT and P-TT. It is found that Nusselt number,friction factor and thermal enhancement factor in the tube equipped with WN-TT appreciably higher than those in the tube fitted with P-TT and plain tube. Over the range considered Nusselt number,friction factor and thermal enhancement factor in a tube with WN-TT are respectively,1.08 to 1.31,1.1 to 1.75 and 1.05 to 1.13 times of those in tube with P-TT. The better performance of WN-TT is due to combined effects of the follow-ing factors:(1) common swirling flow generated by P-TT,(2) additional turbulence offered by the wire nails. Em-pirical correlations for Nusselt number,friction factor and thermal enhancement factor are also formulated from the experimental results of WN-TT and P-TT.展开更多
The influences of circular-ring turbulators （CRT） and twisted tape （TT） swirl generators on the heat transfer enhancement, pressure drop and thermal performance factor characteristics in a round tube are reported....The influences of circular-ring turbulators （CRT） and twisted tape （TT） swirl generators on the heat transfer enhancement, pressure drop and thermal performance factor characteristics in a round tube are reported. The circular-ring turbulators were individually employed and together with the twisted tape swirl generators in the heated section of the tube. Three different pitch ratios （I/D = 1.0, 1.5, and 2.0） of the CRT and three different twist ratios （y/W= 3, 4, and 5） of the TT were introduced. The experiments were conducted using air as the working fluid under a uniform wall heat flux condition, for the Reynolds number between 6000 and 20000. The experimental results reveal that the heat transfer rate, friction factor and thermal performance factor of the combined CRT and qT are considerably higher than those of CRT alone. For the range examined, the Sncreases of mean Nusselt number, friction factor and thermal performance, in the tube equipped with combined devices, respectively, are 25.8%, 82.8% and 6.3% over those in the tube with the CRT alone. The highest thermal performance factor of 1.42 is found for the combined device consisting of the CRT with l/D = 1.0 and TT with y/W= 3. The correlations of the Nusselt number, friction factor and thermal performance factor of the tubes with combined devices are also developed in terms of Reynolds number, Prandtl number, twist ratio and pitch ratio.展开更多
Solid oxide fuel cell is attracting more attention in recent years for its lower pollution emission and high energy convert efficiency. La0.9Sr0.1Ga0.8Mg0.2O3-δis a new kind of electrolyte for intermediate temperatur...Solid oxide fuel cell is attracting more attention in recent years for its lower pollution emission and high energy convert efficiency. La0.9Sr0.1Ga0.8Mg0.2O3-δis a new kind of electrolyte for intermediate temperature SOFC. In this paper, La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM) was prepared by solid state reaction method and formed by tape casting process to make a planar electrolyte. The appropriate amount of the dispersive was obtained by viscosity test. The densities of sintered samples increase with the increasing sintering temperature. It was found that the relative density of electrolyte can approach the value of 95 % by the isostatic pressing treatment of the green tape. The average thermal expansion coefficient of the LSGM is 11 .4×10-6 /℃at temperature range (200 ~ 1200℃). Measurements of the current-voltage and power-current characteristics of the Hi-Air cell show that the open-circuit voltage is 1.067 V at 800℃, peak current density is 0.56 A·cm -2 and the maximum power output is 0.147 W·cm -2.展开更多
文摘Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fillers inside the tubes to enhance heat transfer.This investigation considered the effects of twisted tapes with large holes on a tubular heat exchanger’s(HX)heat transmission,pressure drop,and thermal boosting factor.In the experimental section,counter-swirl flow generators used twisted tapes with pairs of 1.0 cm-diameter holes and changes in porosity(Rp)at 1.30%and 2.70%.In the experiments,air was utilized as a working fluid in a tube with a circular cross-section.The turbulent flow was considered,with Reynolds numbers(Re)domain from 4800 to 9500,and a boundary condition with a uniform wall heat flux was constructed.The findings expound that when the number of holes rose,the Nusselt number(Nu),the factor of friction(f),and the thermal enhancement factor(η)all increased as well.Additionally,as the friction factor increased,the Nusselt number of the tape-equipped tube was noticeably higher.Additionally,it was discovered that the friction factor was between 70%and 94%lower than the values of the tube without tape,while the(Nu)was between 87%and 97%higher than the conventional tube values.The maximum value ofηis 89%.According to the experimental results,empirical correlations for Nu,f,andηwere also generated.
基金Supported by the Research and Development Program of Shandong Province,China(Major Science and Technology Innovation Project)(No.2021CXGC011306)the MNR Key Laboratory of Eco-Environmental Science and Technology,China(No.MEEST-2021-05)+2 种基金the Natural Science Foundation of Shandong Province(No.ZR2020MD002)the Doctoral Science Research Foundation of Yantai University(Nos.SM15B01,SM19B70,SM19B28)the“Double-Hundred Action”of Yantai City(No.2320004-SM20RC02)。
文摘Heteroconchia,a widespread and abundant aquatic invertebrate,is an important clade of bivalve mollusks.The relationship between the three branches of Heteroconchia,Palaeoheterodonta,Archiheterodonta,and Euheterodonta has become a main controversy in molecular studies of the relationships between bivalves.In the present study,we assembled the complete mitochondrial genomes of Tapes dorsatus(Veneridae)and Cardita variegata(Carditidae)using high-throughput sequencing.C.variegata is the first mitochondrial genome belonging to the family Carditidae to be reported.We used 12 protein coding genes(excluding atp8)from the complete mitochondrial genomes of 146 species to recover the internal relationships of Heteroconchia.Our results support the traditional view of early branching of Palaeoheterodonta and the recovery of the monophyly of Palaeoheterodonta,Anomalodesmata,Imparidentia.Rearrangement analysis show that gene arrangement within Venerida was highly variable.Time-calibrated phylogenetic studies based on a relaxed molecular clock model suggested that Veneridae originated approximately 337.62 million years ago(Ma)and split into two major clades,whereas Carditidae originated approximately 510.09 Ma.Our results provide evidence of the internal relationships of Heteroconchia.
基金Project supported by the National Natural Science Foundation of China(Nos.U2241267,1217215511872195)。
文摘Cables composed of rare-earth barium copper oxide(REBCO)tapes have been extensively used in various superconducting devices.In recent years,conductor on round core(CORC)cable has drawn the attention of researchers with its outstanding current-carrying capacity and mechanical properties.The REBCO tapes are wound spirally on the surface of CORC cable.Under extreme loadings,the REBCO tapes with layered composite structures are vulnerable,which can lead to degradation of critical current and even quenching of superconducting devices.In this paper,we simulate the deformation of CORC cable under external loads,and analyze the damage inside the tape with the cohesive zone model(CZM).Firstly,the fabrication and cabling of CORC are simulated,and the stresses and strains generated in the tape are extracted as the initial condition of the next step.Then,the tension and bending loads are applied to CORC cable,and the damage distribution inside the tape is presented.In addition,the effects of some parameters on the damage are discussed during the bending simulations.
文摘The thermal behavior of pipes with a twisted tape inside(used to enhance heat transfer through the tube wall)is studied in the laminar flow regime.Oil is used as the work fluid with the corresponding Reynolds Number spanning the interval 200–2000.It is found that in such conditions the‘Nusselt Number’(Nu)gradually increases with reducing the tape twist ratio,whereas the friction factor is detrimentally affected by the presence of the tape(as witnessed by the comparison with the companion case where a plain tube is considered).In particular,it is shown that the heat transfer efficiency can be improved by nearly 69%if tape inserts with a relatively low twist ratio are used.On the basis of these findings,it is concluded that loose fit tape inserts are superior to tight fit tapes in terms of heat transfer and ease of replacement.
文摘The thermo-hydraulic properties of circular tubes with a twisted tape inside(used accordingly to induce turbulence and enhance heat transfer through the tube wall)are described for Reynolds Numbers ranging from 830 to 1990.Tapes twisted with the three distinct twist ratios are considered,namely,6,4.4 and 3.Air is used as the working fluid in several tests.For the sake of comparison,the standard tube with no insert is also examined.It is shown that in the presence of the twisted tape,the‘frictional factor’,‘Nusselt Number’and the‘thermal performance factor’are much higher than those obtained for the plain tube.Moreover,the tapes having the lowest twist ratio,i.e.,3,are more effective than the others in terms of heat transfer augmentation.The‘thermal performance factor’is greater than one for all the twisted tapes used in the experiments,which confirms the enhanced performances of the heat exchanger and the related savings in terms of total energy.
文摘Heat transfer,friction factor and thermal enhancement factor characteristics of a double pipe heat exchanger fitted with square-cut twisted tapes（STT） and plain twisted tapes（PTT） are investigated experimentally using the water as working fluid.The tapes（STT and PTT） have three twist ratios（y=2.0,4.4 and 6.0） and the Reynolds number ranges from 2000 to 12000.The experimental results reveal that heat transfer rate,friction factor and thermal enhancement factor in the tube equipped with STT are significantly higher than those fitted with PTT. The additional disturbance and secondary flow in the vicinity of the tube wall generated by STT are higher compared to that induced by the PTT is referred as the reason for better performance.Over the range considered,the Nusselt number,friction factor and thermal enhancement factor in a tube with STT are respectively,1.03 to 1.14,1.05 to 1.25 and 1.02 to 1.06 times of those in tube with PTT.An empirical correlation is also formulated to match with experimental data of Nusselt number and friction factor for STT and PTT.
文摘Three kinds of silver-sheathed Bi(2223) oxide superconductor tapes (single-core tape, Ag-powder-added tape and multifilamentary type) were successfully prepared, namely, through the powder-in-tube method. The critical current density (Jc), the Jc-B characteristics, microstructures and the relation between Jc and strain of three kinds of tapes were evaluated and compared. The maximum Jc of three kinds of tapes at 77.7 K in zero magnetic field are 28700 A/cm2 for single-core tape, 20800 A/cm2 for Ag-powder-added tape, 11700 A/cm2 for multifilamentary tape. Single-core tapes exhibit high Jc values and good Jc-B characteristics.
文摘The purpose of this paper is to demonstrate and investigate the concepts of new deployable boom systems, which consist of the BCON （braid coated bi-convex tape） boom and the SMA-BCON （braid coated bi-shape memory alloy convex tape） boom. Both booms are developed for the deployable membrane structures such as solar sails, thin membrane solar array panels, deorbit mechanisms for small satellites and reflectors of space solar power satellite, etc. BCON booms can store around polygonal or cylindrical center hub, and the booms can deploy by the stepwise manner by releasing a constraint mechanism which pins the boons into two or three points for the total length. SMA-BCON booms are mainly developed for a square center body systems, and SMA is adapted on the bent po^nts of the booms where stored around each edge of the center hub. Through the deployment experiments of both booms, the stepwise deployment behavior and its tendency are obtained. The design concept of BCON boom and SMA-BCON hnnm i~ demonstrated through this study.
基金supported by the National Natural Science Foundation of China(40771097)the Special Fund of Industrial(Agriculture)Research for Public Welfare of China(200903001)
文摘More and more attention is being focused on saline water utilization in irrigation due to the shortage of fresh water to agriculture in many regions. For purpose of reducing the risks of using of saline water for irrigation, the mechanism of soil moisture and salinity distribution and transport should be well understood for developing optimum management strategies. In this paper, field experiments were carried out at Junggar Basin, China, to study the effects of drip irrigation water quality and drip tape arrangement on distribution of soil salinity and soil moisture. Six treatments were designed, including two drip tape arrangement modes and three irrigation water concentration levels （0.24, 4.68, and 7.42 dS m^-l）. Results showed that, soil moisture content （SMC） directly beneath the drip tape in all treatments kept a relatively high value about 18% before boll opening stage; the SMC in the narrow strip in single tape arrangement （Ms） plot was obviously lower than that in the double tapes arrangement （Md） plot, indicating that less sufficient water was supplied under the same condition of irrigation depth, but there was no significant reduction in yield. Mulching had not significant influence on salt accumulation but the drip tape arrangement, under the same condition of irrigation water depth and quality, compared with Md, Ms reduced salt accumulation in root zone and brought about relatively high cotton yield.
文摘This paper deals with the experimental investigation on Nusselt number,friction factor and thermal en-hancement factor of a double pipe heat exchanger equipped with twisted tape consisting wire nails(WN-TT) and plain twisted tapes(P-TT) with three different twist ratios of y 2.0,4.4 and 6.0. Test runs are conducted using the water as the working fluid with Reynolds number range between 2000 and 12000 for WN-TT and P-TT. It is found that Nusselt number,friction factor and thermal enhancement factor in the tube equipped with WN-TT appreciably higher than those in the tube fitted with P-TT and plain tube. Over the range considered Nusselt number,friction factor and thermal enhancement factor in a tube with WN-TT are respectively,1.08 to 1.31,1.1 to 1.75 and 1.05 to 1.13 times of those in tube with P-TT. The better performance of WN-TT is due to combined effects of the follow-ing factors:(1) common swirling flow generated by P-TT,(2) additional turbulence offered by the wire nails. Em-pirical correlations for Nusselt number,friction factor and thermal enhancement factor are also formulated from the experimental results of WN-TT and P-TT.
文摘The influences of circular-ring turbulators （CRT） and twisted tape （TT） swirl generators on the heat transfer enhancement, pressure drop and thermal performance factor characteristics in a round tube are reported. The circular-ring turbulators were individually employed and together with the twisted tape swirl generators in the heated section of the tube. Three different pitch ratios （I/D = 1.0, 1.5, and 2.0） of the CRT and three different twist ratios （y/W= 3, 4, and 5） of the TT were introduced. The experiments were conducted using air as the working fluid under a uniform wall heat flux condition, for the Reynolds number between 6000 and 20000. The experimental results reveal that the heat transfer rate, friction factor and thermal performance factor of the combined CRT and qT are considerably higher than those of CRT alone. For the range examined, the Sncreases of mean Nusselt number, friction factor and thermal performance, in the tube equipped with combined devices, respectively, are 25.8%, 82.8% and 6.3% over those in the tube with the CRT alone. The highest thermal performance factor of 1.42 is found for the combined device consisting of the CRT with l/D = 1.0 and TT with y/W= 3. The correlations of the Nusselt number, friction factor and thermal performance factor of the tubes with combined devices are also developed in terms of Reynolds number, Prandtl number, twist ratio and pitch ratio.
基金Project supported by the National Natural Science Foundation of China (90510006)
文摘Solid oxide fuel cell is attracting more attention in recent years for its lower pollution emission and high energy convert efficiency. La0.9Sr0.1Ga0.8Mg0.2O3-δis a new kind of electrolyte for intermediate temperature SOFC. In this paper, La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM) was prepared by solid state reaction method and formed by tape casting process to make a planar electrolyte. The appropriate amount of the dispersive was obtained by viscosity test. The densities of sintered samples increase with the increasing sintering temperature. It was found that the relative density of electrolyte can approach the value of 95 % by the isostatic pressing treatment of the green tape. The average thermal expansion coefficient of the LSGM is 11 .4×10-6 /℃at temperature range (200 ~ 1200℃). Measurements of the current-voltage and power-current characteristics of the Hi-Air cell show that the open-circuit voltage is 1.067 V at 800℃, peak current density is 0.56 A·cm -2 and the maximum power output is 0.147 W·cm -2.
