This study focuses on the analytical prediction of subsurface settlement induced by shield tunnelling in sandy cobble stratum considering the volumetric deformation modes of the soil above the tunnel crown.A series of...This study focuses on the analytical prediction of subsurface settlement induced by shield tunnelling in sandy cobble stratum considering the volumetric deformation modes of the soil above the tunnel crown.A series of numerical analyses is performed to examine the effects of cover depth ratio(C/D),tunnel volume loss rate(h t)and volumetric block proportion(VBP)on the characteristics of subsurface settle-ment trough and soil volume loss.Considering the ground loss variation with depth,three modes are deduced from the volumetric deformation responses of the soil above the tunnel crown.Then,analytical solutions to predict subsurface settlement for each mode are presented using stochastic medium theory.The influences of C/D,h t and VBP on the key parameters(i.e.B and N)in the analytical expressions are discussed to determine the fitting formulae of B and N.Finally,the proposed analytical solutions are validated by the comparisons with the results of model test and numerical simulation.Results show that the fitting formulae provide a convenient and reliable way to evaluate the key parameters.Besides,the analytical solutions are reasonable and available in predicting the subsurface settlement induced by shield tunnelling in sandy cobble stratum.展开更多
Twin curved tunnels are often encountered in shield tunnelling,where significant complexities in densely exploited underground space are observed.In this study,the ground settlement and tunnel deformation due to twin-...Twin curved tunnels are often encountered in shield tunnelling,where significant complexities in densely exploited underground space are observed.In this study,the ground settlement and tunnel deformation due to twin-curved shield tunnelling in soft ground were investigated using numerical simulation and field monitoring.Different curvature radii of twin curved tunnels and subsequent effects of tunnel construction were considered to reveal the tunnelling effect on ground surface settlement and tunnel deformation.The results show that the settlement trough yields one offset towards inside of curved shield tunnelling.The location of settlement trough and maximum settlement were affected by curvature radius but except for the shape and width of settlement trough.Adjacent parallel twin-curved shield tunnelling could increase the offset of existing settlement trough and maximum settlement.Then,an empirical prediction of surface settlement trough due to twin-curved shield tunnelling with same tunnel diameters in soft clay was proposed,which was applicable to curvature radius less than 800 m.Finally,a minimum radius of 600 m of curvature tunnel was proposed in terms of allowable convergence deformation of tunnel.The result could provide guidance on safety evaluation for twin curved shield tunnelling construction.展开更多
This paper presents a new analytical solution for assessing the longitudinal deformation of shield tunnel associated with overcrossing tunnelling in consideration of circumferential joints.A simplified longitudinal be...This paper presents a new analytical solution for assessing the longitudinal deformation of shield tunnel associated with overcrossing tunnelling in consideration of circumferential joints.A simplified longitudinal beam-spring model(SLBSM)is established to model the longitudinal behaviours of shield tunnel,which can consider the opening and dislocation between segmental rings simultaneously.Then,the existing tunnel is treated as the SLBSM resting on the elastic foundation.The state equations including tunnel displacements and internal forces are constructed to solve the discontinuous deformation of circumferential joint-segmental ring.The feasibility of the proposed solution is verified through three well-documented cases.The predictions from the proposed method are also compared with other analytical methods.It is found that the proposed method can well capture the deformation of tunnel segmental rings and joints,where the rigid displacement mainly occurs in the segmental rings while the rotation and dislocation occur in the circumferential joints.Some dominant parameters are also analysed to explore the effects on existing tunnel deformation,including the rotation stiffness and shearing stiffness of joints,the skew angle and the clearance between new and old tunnels.展开更多
Evaluating the adaptability of cantilever boring machine(CBM) through in-depth excavation and analysis of tunnel excavation data and rock mass parameters is the premise of mechanical design and efficient excavation in...Evaluating the adaptability of cantilever boring machine(CBM) through in-depth excavation and analysis of tunnel excavation data and rock mass parameters is the premise of mechanical design and efficient excavation in the field of underground space engineering.This paper presented a case study of tunnelling performance prediction method of CBM in sedimentary hard-rock tunnel of Karst landform type by using tunneling data and surrounding rock parameters.The uniaxial compressive strength(UCS),rock integrity factor(Kv),basic quality index([BQ]),rock quality index RQD,brazilian tensile strength(BTS) and brittleness index(BI) were introduced to construct a performance prediction database based on the hard-rock tunnel of Guiyang Metro Line 1 and Line 3,and then established the performance prediction model of cantilever boring machine.Then the deep belief network(DBN) was introduced into the performance prediction model,and the reliability of performance prediction model was verified by combining with engineering data.The study showed that the influence degree of surrounding rock parameters on the tunneling performance of the cantilever boring machine is UCS > [BQ] > BTS >RQD > Kv > BI.The performance prediction model shows that the instantaneous cutting rate(ICR) has a good correlation with the surrounding rock parameters,and the predicting model accuracy is related to the reliability of construction data.The prediction of limestone and dolomite sections of Line 3 based on the DBN performance prediction model shows that the measured ICR and predicted ICR is consistent and the built performance prediction model is reliable.The research results have theoretical reference significance for the applicability analysis and mechanical selection of cantilever boring machine for hard rock tunnel.展开更多
Shield machines are currently the main tool for underground tunnel construction. Due to the complexity and variability of the underground construction environment, it is necessary to accurately identify the ground in ...Shield machines are currently the main tool for underground tunnel construction. Due to the complexity and variability of the underground construction environment, it is necessary to accurately identify the ground in real-time during the tunnel construction process to match and adjust the tunnel parameters according to the geological conditions to ensure construction safety. Compared with the traditional method of stratum identifcation based on staged drilling sampling, the real-time stratum identifcation method based on construction data has the advantages of low cost and high precision. Due to the huge amount of sensor data of the ultra-large diameter mud-water balance shield machine, in order to balance the identifcation time and recognition accuracy of the formation, it is necessary to screen the multivariate data features collected by hundreds of sensors. In response to this problem, this paper proposes a voting-based feature extraction method (VFS), which integrates multiple feature extraction algorithms FSM, and the frequency of each feature in all feature extraction algorithms is the basis for voting. At the same time, in order to verify the wide applicability of the method, several commonly used classifcation models are used to train and test the obtained efective feature data, and the model accuracy and recognition time are used as evaluation indicators, and the classifcation with the best combination with VFS is obtained. The experimental results of shield machine data of 6 diferent geological structures show that the average accuracy of 13 features obtained by VFS combined with diferent classifcation algorithms is 91%;among them, the random forest model takes less time and has the highest recognition accuracy, reaching 93%, showing best compatibility with VFS. Therefore, the VFS algorithm proposed in this paper has high reliability and wide applicability for stratum identifcation in the process of tunnel construction, and can be matched with a variety of classifer algorithms. By combining 13 features selected from shield machine data features with random forest, the identifcation of the construction stratum environment of shield tunnels can be well realized, and further theoretical guidance for underground engineering construction can be provided.展开更多
We present theoretical calculations of spin transport in spin filtering magnetic tunnelling junctions based on the Landauer Biittiker formalism and taking into account the spin-orbit coupling （SOC）. It is shown that...We present theoretical calculations of spin transport in spin filtering magnetic tunnelling junctions based on the Landauer Biittiker formalism and taking into account the spin-orbit coupling （SOC）. It is shown that spin-flip scattering induced by SOC is stronger in parallel alignment of magnetization of the ferromegnet barrier （FB） and the ferromagnetic electrode than that in antiparallel case. The increase of negative tunnelling magnetoresistance with bias is in agreement with recent experimental observation.展开更多
By taking the energy conservation and angular momentum conservation into account, the characteristics of the quantum-tunnelling radiation of Einstein-Maxwell-Dilaton-Axion black hole are studied and the result shows t...By taking the energy conservation and angular momentum conservation into account, the characteristics of the quantum-tunnelling radiation of Einstein-Maxwell-Dilaton-Axion black hole are studied and the result shows that the tunnelling rate of such a black hole is relevant to Bekenstein-Hawking entropy and that the obtained radiation spectrum is not pure thermal.展开更多
Rockbursting in deep tunnelling is a complex phenomenon posing significant challenges both at the design and construction stages of an underground excavation within hard rock masses and under high in situ stresses. Wh...Rockbursting in deep tunnelling is a complex phenomenon posing significant challenges both at the design and construction stages of an underground excavation within hard rock masses and under high in situ stresses. While local experience, field monitoring, and informed data-rich analysis are some of the tools commonly used to manage the hazards and the associated risks, advanced numerical techniques based on discontinuum modelling have also shown potential in assisting in the assessment of rockbursting. In this study, the hybrid finite-discrete element method(FDEM) is employed to investigate the failure and fracturing processes, and the mechanisms of energy storage and rapid release resulting in bursting, as well as to assess its utility as part of the design process of underground excavations.Following the calibration of the numerical model to simulate a deep excavation in a hard, massive rock mass, discrete fracture network(DFN) geometries are integrated into the model in order to examine the impact of rock structure on rockbursting under high in situ stresses. The obtained analysis results not only highlight the importance of explicitly simulating pre-existing joints within the model, as they affect the mobilised failure mechanisms and the intensity of strain bursting phenomena, but also show how the employed joint network geometry, the field stress conditions, and their interaction influence the extent and depth of the excavation induced damage. Furthermore, a rigorous analysis of the mass and velocity of the ejected rock blocks and comparison of the obtained data with well-established semi-empirical approaches demonstrate the potential of the method to provide realistic estimates of the kinetic energy released during bursting for determining the energy support demand.展开更多
In this paper, we extend Zhang and Zhao＇s recent work to the black hole with a mass-quadruple moment. The behaviour of the tunnelling massive particles is investigated, and the emission rate at which massive particle...In this paper, we extend Zhang and Zhao＇s recent work to the black hole with a mass-quadruple moment. The behaviour of the tunnelling massive particles is investigated, and the emission rate at which massive particles tunnel across the event horizon of the black hole is calculated. The result is consistent with an underlying unitary theory, and takes the same functional form as that of a massless particle.展开更多
This paper presents the results of laboratory test on the feasibility of soil conditioning for earth pressurebalance （EPB） excavation in a tar sand, which is a natural material never studied in this respect. Thelabo...This paper presents the results of laboratory test on the feasibility of soil conditioning for earth pressurebalance （EPB） excavation in a tar sand, which is a natural material never studied in this respect. Thelaboratory test performed is based on a procedure and methods used in previous studies with differenttypes of soils, but for this special complex material, additional tests are also conducted to verify particularproperties of the tar sands, such as the tilt test and vane shear test usually used in cohesive materials, anda direct shear test. The laboratory test proves that the test procedure is applicable also to this type of soiland the conditioned material can be considered suitable for EPB excavations, although it is necessary touse a certain percentage of fine elements （filler） to create a material suitable to be mixed with foam. Thetest results show that the conditioned material fulfils the required standard for an EPB application.展开更多
The control of slurry pressure aiming to be consistent with the external water and earth pressure during shield tunnelling has great significance for face stability,especially in urban areas or underwater where the su...The control of slurry pressure aiming to be consistent with the external water and earth pressure during shield tunnelling has great significance for face stability,especially in urban areas or underwater where the surrounding environment is very sensitive to the fluctuation of slurry pressure.In this study,an optimal control method for slurry pressure during shield tunnelling is developed,which is composed of an identifier and a controller.The established identifier based on the random forest(RF)can describe the complex non-linear relationship between slurry pressure and its influencing factors.The proposed controller based on particle swarm optimization(PSO)can optimize the key factor to precisely control the slurry pressure at the normal state of advancement.A data set from Tsinghua Yuan Tunnel in China was used to train the RF model and several performance measures like R2,RMSE,etc.,were employed to evaluate.Then,the hybrid RF-PSO control method is adopted to optimize the control of slurry pressure.The good agreement between optimized slurry pressure and expected values demonstrates a high identifying and control precision.展开更多
In this paper, we extend Parikh＇ recent work to the Vaidya-de Sitter black hole which is non-stationary. We view Hawking radiation as a tunnelling process across the event horizon and calculate the tunnelling probabi...In this paper, we extend Parikh＇ recent work to the Vaidya-de Sitter black hole which is non-stationary. We view Hawking radiation as a tunnelling process across the event horizon and calculate the tunnelling probability when the particle crosses the event horizon. From the tunnelling probability we also find a leading correction to the semiclassical emission rate.展开更多
Since the development of the new Austrian tunnelling method(NATM)in the 1960s,this technique has been applied successfully in many tunnels.However,opinions of NATM principles emerged till 2000,i.e.NATM is not a tunnel...Since the development of the new Austrian tunnelling method(NATM)in the 1960s,this technique has been applied successfully in many tunnels.However,opinions of NATM principles emerged till 2000,i.e.NATM is not a tunnelling method,but an approach covering all general principles of tunnelling.To investigate the general principles of the NATM,this study focused on tunnelling practises in the Bolu tunnel,and evaluated the conditions under which the NATM practises could be effective.The Bolu tunnel project was designed following the NATM principles.It is evident that practises adopted in this tunnel are important with respect to the NATM.In addition,it shows that the solutions to the problems encountered in this tunnel are consistent with the NATM principles.Finally,the study determines the ground types of the NATM principles and proposes associated updates.展开更多
This paper is prepared in honour of Professor E.T.Brown for his outstanding contributions to rock mechanics and geotechnical engineering and also for his personal influence on the first author’s research career in ge...This paper is prepared in honour of Professor E.T.Brown for his outstanding contributions to rock mechanics and geotechnical engineering and also for his personal influence on the first author’s research career in geomechanics and geotechnical engineering.As a result,we have picked a topic that reflects two key research areas in which Professor E.T.Brown has made seminal contributions over a long and distinguished career.These two areas are concerned with the application of the critical state concept to modelling geomaterials and the analysis of underground excavation or tunnelling in geomaterials.Partially due to Professor Brown’s influence,the first author has also been conducting research in these two areas over many years.In particular,this paper aims to describe briefly the development of a unified critical state model for geomaterials together with an application to cavity contraction problems and tunnelling in soils.展开更多
Extending Parikh＇s semi-classical quantum tunnelling model, this paper has studied the Hawking radiation of the charged particle via tunnelling from the horizon of the axisymmetric Sen black hole. Different from the ...Extending Parikh＇s semi-classical quantum tunnelling model, this paper has studied the Hawking radiation of the charged particle via tunnelling from the horizon of the axisymmetric Sen black hole. Different from the uncharged massless particle, the geodesics of the charged massive particle tunnelling from the horizon is not light-like. The derived result supports Parikh＇s opinion and provides a correct modification to Hawking strictly thermal spectrum developed by the fixed background space-time and not considering the energy conservation and the self-gravitation interaction.展开更多
Resonant tunnelling diodes （RTDs） have negative differential resistance effect, and the current-voltage characteristics change as a function of external stress, which is regarded as mesc-piezoresistance effect of RT...Resonant tunnelling diodes （RTDs） have negative differential resistance effect, and the current-voltage characteristics change as a function of external stress, which is regarded as mesc-piezoresistance effect of RTDs. In this paper, a novel micro-accelerometer based on AlAs/GaAs/In0.1Ga0.9As/GaAs/AlAs RTDs is designed and fabricated to be a four-beam-mass structure, and an RTD-Wheatstone bridge measurement system is established to test the basic properties of this novel accelerometer. According to the experimental results, the sensitivity of the RTD based micro-accelerometer is adjustable within a range of 3 orders when the bias voltage of the sensor changes. The largest sensitivity of this RTD based miero-accelerometer is 560.2025 mV/g which is about 10 times larger than that of silicon based micro piezoresistive accelerometer, while the smallest one is 1.49135 mV/g.展开更多
Applying Parikh＇s quantum tunnelling method, this paper has studied the quantum tunnelling radiation of Schwarzschild de Sitter black hole with a global monopole. The result shows that the tunnelling rates at the eve...Applying Parikh＇s quantum tunnelling method, this paper has studied the quantum tunnelling radiation of Schwarzschild de Sitter black hole with a global monopole. The result shows that the tunnelling rates at the event horizon and the cosmological horizon are related to Bekenstein-Hawking entropy and the derived radiation spectrum is not precisely thermal when considering energy conservation and self-gravitation interaction.展开更多
We have studied the quantum transport of electrons in a three-step single-barrier A1GaAs heterostructure under electric field. Using the quantum transmitting boundary method and Tsu-Esaki approach, we have calculated ...We have studied the quantum transport of electrons in a three-step single-barrier A1GaAs heterostructure under electric field. Using the quantum transmitting boundary method and Tsu-Esaki approach, we have calculated the transmission coefficient and current-voltage characteristic. The difference of the effective mass among the three barriers is taken into account. Effects of the barrier width on transmission coefficient and peak-to-valley current ratios are examined. The largest peak-to-valley current ratio is obtained when the ratio of widths of the left, middle, and right barrier is fixed at 4：2：1. The calculated results may be helpful for designing devices based on three-step barrier heterostructures.展开更多
This paper investigates the dependence of current voltage characteristics of AlAs/In0.53Ga0.47As/InAs resonant tunnelling diodes （RTDs） on spacer layer thickness. It finds that the peak and the valley current densit...This paper investigates the dependence of current voltage characteristics of AlAs/In0.53Ga0.47As/InAs resonant tunnelling diodes （RTDs） on spacer layer thickness. It finds that the peak and the valley current density J in the negative differential resistance （NDR） region depends strongly on the thickness of the spacer layer. The measured peak to valley current ratio of RTDs studied here is shown to improve while the current density through RTDs decreases with increasing spacer layer thickness below a critical value.展开更多
Directive(EU)2017/164 establishes a fourth list of indicative occupational exposure limit values(IOELVs)to protect workers from risks of exposure to hazardous chemicals.It states that in underground mining and tunnell...Directive(EU)2017/164 establishes a fourth list of indicative occupational exposure limit values(IOELVs)to protect workers from risks of exposure to hazardous chemicals.It states that in underground mining and tunnelling,Member States may benefit from a transitional period regarding IOELVs for nitrogen monoxide,nitrogen dioxide,and carbon monoxide,during which the existing established IOELVs may be applied.The European Advisory Committee on Health and Safety at Work questions the technical feasibility of the proposed IOELVs in underground mining(CO,NO and NO2)and tunnelling(NO and NO2).Challenges arise concerning the availability of measurement methodologies for compliance with proposed IOELVs(NO2)in underground mining and tunnelling environments.展开更多
基金This study was supported by the National Natural Science Foundation of China(Grant Nos.51538001 and 51978019).
文摘This study focuses on the analytical prediction of subsurface settlement induced by shield tunnelling in sandy cobble stratum considering the volumetric deformation modes of the soil above the tunnel crown.A series of numerical analyses is performed to examine the effects of cover depth ratio(C/D),tunnel volume loss rate(h t)and volumetric block proportion(VBP)on the characteristics of subsurface settle-ment trough and soil volume loss.Considering the ground loss variation with depth,three modes are deduced from the volumetric deformation responses of the soil above the tunnel crown.Then,analytical solutions to predict subsurface settlement for each mode are presented using stochastic medium theory.The influences of C/D,h t and VBP on the key parameters(i.e.B and N)in the analytical expressions are discussed to determine the fitting formulae of B and N.Finally,the proposed analytical solutions are validated by the comparisons with the results of model test and numerical simulation.Results show that the fitting formulae provide a convenient and reliable way to evaluate the key parameters.Besides,the analytical solutions are reasonable and available in predicting the subsurface settlement induced by shield tunnelling in sandy cobble stratum.
基金financially supported by the National Natural Science Foundation of China(Grant No.42307260)the Sichuan Natural Science Foundation(Grant No.2023NSFSC0882)the Open Project of the Research Center of Tunnelling and Underground Engineering of Ministry of Education(Grant No.TUC2022-03).
文摘Twin curved tunnels are often encountered in shield tunnelling,where significant complexities in densely exploited underground space are observed.In this study,the ground settlement and tunnel deformation due to twin-curved shield tunnelling in soft ground were investigated using numerical simulation and field monitoring.Different curvature radii of twin curved tunnels and subsequent effects of tunnel construction were considered to reveal the tunnelling effect on ground surface settlement and tunnel deformation.The results show that the settlement trough yields one offset towards inside of curved shield tunnelling.The location of settlement trough and maximum settlement were affected by curvature radius but except for the shape and width of settlement trough.Adjacent parallel twin-curved shield tunnelling could increase the offset of existing settlement trough and maximum settlement.Then,an empirical prediction of surface settlement trough due to twin-curved shield tunnelling with same tunnel diameters in soft clay was proposed,which was applicable to curvature radius less than 800 m.Finally,a minimum radius of 600 m of curvature tunnel was proposed in terms of allowable convergence deformation of tunnel.The result could provide guidance on safety evaluation for twin curved shield tunnelling construction.
文摘This paper presents a new analytical solution for assessing the longitudinal deformation of shield tunnel associated with overcrossing tunnelling in consideration of circumferential joints.A simplified longitudinal beam-spring model(SLBSM)is established to model the longitudinal behaviours of shield tunnel,which can consider the opening and dislocation between segmental rings simultaneously.Then,the existing tunnel is treated as the SLBSM resting on the elastic foundation.The state equations including tunnel displacements and internal forces are constructed to solve the discontinuous deformation of circumferential joint-segmental ring.The feasibility of the proposed solution is verified through three well-documented cases.The predictions from the proposed method are also compared with other analytical methods.It is found that the proposed method can well capture the deformation of tunnel segmental rings and joints,where the rigid displacement mainly occurs in the segmental rings while the rotation and dislocation occur in the circumferential joints.Some dominant parameters are also analysed to explore the effects on existing tunnel deformation,including the rotation stiffness and shearing stiffness of joints,the skew angle and the clearance between new and old tunnels.
基金National Natural Science Foundation of China (Grant No.52178393)the Science and Technology Innovation Team of Shaanxi Innovation Capability Support Plan (Grant No.2020TD005)Science and Technology Innovation Project of China Railway Construction Bridge Engineering Bureau Group Co.,Ltd.(Grant No.DQJ-2020-B07)。
文摘Evaluating the adaptability of cantilever boring machine(CBM) through in-depth excavation and analysis of tunnel excavation data and rock mass parameters is the premise of mechanical design and efficient excavation in the field of underground space engineering.This paper presented a case study of tunnelling performance prediction method of CBM in sedimentary hard-rock tunnel of Karst landform type by using tunneling data and surrounding rock parameters.The uniaxial compressive strength(UCS),rock integrity factor(Kv),basic quality index([BQ]),rock quality index RQD,brazilian tensile strength(BTS) and brittleness index(BI) were introduced to construct a performance prediction database based on the hard-rock tunnel of Guiyang Metro Line 1 and Line 3,and then established the performance prediction model of cantilever boring machine.Then the deep belief network(DBN) was introduced into the performance prediction model,and the reliability of performance prediction model was verified by combining with engineering data.The study showed that the influence degree of surrounding rock parameters on the tunneling performance of the cantilever boring machine is UCS > [BQ] > BTS >RQD > Kv > BI.The performance prediction model shows that the instantaneous cutting rate(ICR) has a good correlation with the surrounding rock parameters,and the predicting model accuracy is related to the reliability of construction data.The prediction of limestone and dolomite sections of Line 3 based on the DBN performance prediction model shows that the measured ICR and predicted ICR is consistent and the built performance prediction model is reliable.The research results have theoretical reference significance for the applicability analysis and mechanical selection of cantilever boring machine for hard rock tunnel.
基金Supported by National Natural Science Foundation of China and Shanxi Coalbased Low Carbon Joint Fund(Grant No.U1910211)National Natural Science Foundation of China(Grant Nos.51975024 and 52105044)National Key Research and Development Project(Grant No.2019YFC0121700).
文摘Shield machines are currently the main tool for underground tunnel construction. Due to the complexity and variability of the underground construction environment, it is necessary to accurately identify the ground in real-time during the tunnel construction process to match and adjust the tunnel parameters according to the geological conditions to ensure construction safety. Compared with the traditional method of stratum identifcation based on staged drilling sampling, the real-time stratum identifcation method based on construction data has the advantages of low cost and high precision. Due to the huge amount of sensor data of the ultra-large diameter mud-water balance shield machine, in order to balance the identifcation time and recognition accuracy of the formation, it is necessary to screen the multivariate data features collected by hundreds of sensors. In response to this problem, this paper proposes a voting-based feature extraction method (VFS), which integrates multiple feature extraction algorithms FSM, and the frequency of each feature in all feature extraction algorithms is the basis for voting. At the same time, in order to verify the wide applicability of the method, several commonly used classifcation models are used to train and test the obtained efective feature data, and the model accuracy and recognition time are used as evaluation indicators, and the classifcation with the best combination with VFS is obtained. The experimental results of shield machine data of 6 diferent geological structures show that the average accuracy of 13 features obtained by VFS combined with diferent classifcation algorithms is 91%;among them, the random forest model takes less time and has the highest recognition accuracy, reaching 93%, showing best compatibility with VFS. Therefore, the VFS algorithm proposed in this paper has high reliability and wide applicability for stratum identifcation in the process of tunnel construction, and can be matched with a variety of classifer algorithms. By combining 13 features selected from shield machine data features with random forest, the identifcation of the construction stratum environment of shield tunnels can be well realized, and further theoretical guidance for underground engineering construction can be provided.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10564004)Korea Research Foundation(Grant No. KRF-2005-070-C00065)
文摘We present theoretical calculations of spin transport in spin filtering magnetic tunnelling junctions based on the Landauer Biittiker formalism and taking into account the spin-orbit coupling （SOC）. It is shown that spin-flip scattering induced by SOC is stronger in parallel alignment of magnetization of the ferromegnet barrier （FB） and the ferromagnetic electrode than that in antiparallel case. The increase of negative tunnelling magnetoresistance with bias is in agreement with recent experimental observation.
基金Project supported by the National Natural Science Foundation of China （Grant No 10347008） and by Sichuan Provincial Science and Technology Department （Grant No 05JY029-092）.
文摘By taking the energy conservation and angular momentum conservation into account, the characteristics of the quantum-tunnelling radiation of Einstein-Maxwell-Dilaton-Axion black hole are studied and the result shows that the tunnelling rate of such a black hole is relevant to Bekenstein-Hawking entropy and that the obtained radiation spectrum is not pure thermal.
文摘Rockbursting in deep tunnelling is a complex phenomenon posing significant challenges both at the design and construction stages of an underground excavation within hard rock masses and under high in situ stresses. While local experience, field monitoring, and informed data-rich analysis are some of the tools commonly used to manage the hazards and the associated risks, advanced numerical techniques based on discontinuum modelling have also shown potential in assisting in the assessment of rockbursting. In this study, the hybrid finite-discrete element method(FDEM) is employed to investigate the failure and fracturing processes, and the mechanisms of energy storage and rapid release resulting in bursting, as well as to assess its utility as part of the design process of underground excavations.Following the calibration of the numerical model to simulate a deep excavation in a hard, massive rock mass, discrete fracture network(DFN) geometries are integrated into the model in order to examine the impact of rock structure on rockbursting under high in situ stresses. The obtained analysis results not only highlight the importance of explicitly simulating pre-existing joints within the model, as they affect the mobilised failure mechanisms and the intensity of strain bursting phenomena, but also show how the employed joint network geometry, the field stress conditions, and their interaction influence the extent and depth of the excavation induced damage. Furthermore, a rigorous analysis of the mass and velocity of the ejected rock blocks and comparison of the obtained data with well-established semi-empirical approaches demonstrate the potential of the method to provide realistic estimates of the kinetic energy released during bursting for determining the energy support demand.
文摘In this paper, we extend Zhang and Zhao＇s recent work to the black hole with a mass-quadruple moment. The behaviour of the tunnelling massive particles is investigated, and the emission rate at which massive particles tunnel across the event horizon of the black hole is calculated. The result is consistent with an underlying unitary theory, and takes the same functional form as that of a massless particle.
文摘This paper presents the results of laboratory test on the feasibility of soil conditioning for earth pressurebalance （EPB） excavation in a tar sand, which is a natural material never studied in this respect. Thelaboratory test performed is based on a procedure and methods used in previous studies with differenttypes of soils, but for this special complex material, additional tests are also conducted to verify particularproperties of the tar sands, such as the tilt test and vane shear test usually used in cohesive materials, anda direct shear test. The laboratory test proves that the test procedure is applicable also to this type of soiland the conditioned material can be considered suitable for EPB excavations, although it is necessary touse a certain percentage of fine elements （filler） to create a material suitable to be mixed with foam. Thetest results show that the conditioned material fulfils the required standard for an EPB application.
基金This work was supported by the Fundamental Research Funds for the Central Universities(2020YJS141)the Key Project of High-speed Rail Joint Fund of National Natural Science Foundation of China under Grant No.U1834208.
文摘The control of slurry pressure aiming to be consistent with the external water and earth pressure during shield tunnelling has great significance for face stability,especially in urban areas or underwater where the surrounding environment is very sensitive to the fluctuation of slurry pressure.In this study,an optimal control method for slurry pressure during shield tunnelling is developed,which is composed of an identifier and a controller.The established identifier based on the random forest(RF)can describe the complex non-linear relationship between slurry pressure and its influencing factors.The proposed controller based on particle swarm optimization(PSO)can optimize the key factor to precisely control the slurry pressure at the normal state of advancement.A data set from Tsinghua Yuan Tunnel in China was used to train the RF model and several performance measures like R2,RMSE,etc.,were employed to evaluate.Then,the hybrid RF-PSO control method is adopted to optimize the control of slurry pressure.The good agreement between optimized slurry pressure and expected values demonstrates a high identifying and control precision.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10373003, 10475013 and the State Key Development for Basic Research of China （Grant No 2003CB716300）.Acknowledgement We would like to thank Guihua Tian for help.
文摘In this paper, we extend Parikh＇ recent work to the Vaidya-de Sitter black hole which is non-stationary. We view Hawking radiation as a tunnelling process across the event horizon and calculate the tunnelling probability when the particle crosses the event horizon. From the tunnelling probability we also find a leading correction to the semiclassical emission rate.
基金General Directorate of Highways(KGM)for their supports。
文摘Since the development of the new Austrian tunnelling method(NATM)in the 1960s,this technique has been applied successfully in many tunnels.However,opinions of NATM principles emerged till 2000,i.e.NATM is not a tunnelling method,but an approach covering all general principles of tunnelling.To investigate the general principles of the NATM,this study focused on tunnelling practises in the Bolu tunnel,and evaluated the conditions under which the NATM practises could be effective.The Bolu tunnel project was designed following the NATM principles.It is evident that practises adopted in this tunnel are important with respect to the NATM.In addition,it shows that the solutions to the problems encountered in this tunnel are consistent with the NATM principles.Finally,the study determines the ground types of the NATM principles and proposes associated updates.
文摘This paper is prepared in honour of Professor E.T.Brown for his outstanding contributions to rock mechanics and geotechnical engineering and also for his personal influence on the first author’s research career in geomechanics and geotechnical engineering.As a result,we have picked a topic that reflects two key research areas in which Professor E.T.Brown has made seminal contributions over a long and distinguished career.These two areas are concerned with the application of the critical state concept to modelling geomaterials and the analysis of underground excavation or tunnelling in geomaterials.Partially due to Professor Brown’s influence,the first author has also been conducting research in these two areas over many years.In particular,this paper aims to describe briefly the development of a unified critical state model for geomaterials together with an application to cavity contraction problems and tunnelling in soils.
文摘Extending Parikh＇s semi-classical quantum tunnelling model, this paper has studied the Hawking radiation of the charged particle via tunnelling from the horizon of the axisymmetric Sen black hole. Different from the uncharged massless particle, the geodesics of the charged massive particle tunnelling from the horizon is not light-like. The derived result supports Parikh＇s opinion and provides a correct modification to Hawking strictly thermal spectrum developed by the fixed background space-time and not considering the energy conservation and the self-gravitation interaction.
基金supported in part by the National Natural Science Foundation of China (Grant No 50775209)the Fork Ying Tung Education Foundation (Grant No 101052)Program for Excellent Talents by Ministry of Education of China
文摘Resonant tunnelling diodes （RTDs） have negative differential resistance effect, and the current-voltage characteristics change as a function of external stress, which is regarded as mesc-piezoresistance effect of RTDs. In this paper, a novel micro-accelerometer based on AlAs/GaAs/In0.1Ga0.9As/GaAs/AlAs RTDs is designed and fabricated to be a four-beam-mass structure, and an RTD-Wheatstone bridge measurement system is established to test the basic properties of this novel accelerometer. According to the experimental results, the sensitivity of the RTD based micro-accelerometer is adjustable within a range of 3 orders when the bias voltage of the sensor changes. The largest sensitivity of this RTD based miero-accelerometer is 560.2025 mV/g which is about 10 times larger than that of silicon based micro piezoresistive accelerometer, while the smallest one is 1.49135 mV/g.
基金Proiect suooorted by the National Natural Science Foundation of China （Grant No 10347008）.
文摘Applying Parikh＇s quantum tunnelling method, this paper has studied the quantum tunnelling radiation of Schwarzschild de Sitter black hole with a global monopole. The result shows that the tunnelling rates at the event horizon and the cosmological horizon are related to Bekenstein-Hawking entropy and the derived radiation spectrum is not precisely thermal when considering energy conservation and self-gravitation interaction.
基金Project supported by the National Fund for Distinguished Young Scholars of China （Grant No 60425415）, the Major Program of the National Natural Science Foundation of China （Grant No 10390162）, and the Shanghai Municipal Commission of Science and Technology （Grant No 05XD14020）.
文摘We have studied the quantum transport of electrons in a three-step single-barrier A1GaAs heterostructure under electric field. Using the quantum transmitting boundary method and Tsu-Esaki approach, we have calculated the transmission coefficient and current-voltage characteristic. The difference of the effective mass among the three barriers is taken into account. Effects of the barrier width on transmission coefficient and peak-to-valley current ratios are examined. The largest peak-to-valley current ratio is obtained when the ratio of widths of the left, middle, and right barrier is fixed at 4：2：1. The calculated results may be helpful for designing devices based on three-step barrier heterostructures.
文摘This paper investigates the dependence of current voltage characteristics of AlAs/In0.53Ga0.47As/InAs resonant tunnelling diodes （RTDs） on spacer layer thickness. It finds that the peak and the valley current density J in the negative differential resistance （NDR） region depends strongly on the thickness of the spacer layer. The measured peak to valley current ratio of RTDs studied here is shown to improve while the current density through RTDs decreases with increasing spacer layer thickness below a critical value.
文摘Directive(EU)2017/164 establishes a fourth list of indicative occupational exposure limit values(IOELVs)to protect workers from risks of exposure to hazardous chemicals.It states that in underground mining and tunnelling,Member States may benefit from a transitional period regarding IOELVs for nitrogen monoxide,nitrogen dioxide,and carbon monoxide,during which the existing established IOELVs may be applied.The European Advisory Committee on Health and Safety at Work questions the technical feasibility of the proposed IOELVs in underground mining(CO,NO and NO2)and tunnelling(NO and NO2).Challenges arise concerning the availability of measurement methodologies for compliance with proposed IOELVs(NO2)in underground mining and tunnelling environments.
