By utilizing a two-step process to express the charge generation and separation mechanism of the transition metal oxides （TMOs） interconnector layer, a numerical model was proposed for tandem organic light emitting ...By utilizing a two-step process to express the charge generation and separation mechanism of the transition metal oxides （TMOs） interconnector layer, a numerical model was proposed for tandem organic light emitting diodes （OLEDs） with a TMOs thin film as the interconnector layer. This model is valid not only for an n-type TMOs interconnector layer, but also for a p-type TMOs interconnector layer. Based on this model, the influences of different carrier injection barriers at the interface of the electrode/organic layer on the charge generation ability of interconnector layers were studied. In addition, the distribution characteristics of carrier concentration, electric field intensity and potential in the device under different carrier injection barriers were studied. The results show that when keeping one carrier injection barrier as a constant while increasing another carrier injection barrier, carri- ers injected into the device were gradually decreased, the carrier generation ability of the interconnector layer was gradually reduced, the electric field intensity at the interface of the organic/electrode was gradually enhanced, and the electric field distribution became nearly linear： the voltage drops in two light units gradually became the same. Meanwhile, the carrier injection ability decreased as another carrier injection barrier increased. The simulation re- sults agree with the experimental data. The obtained results can provide us with a deep understanding of the work mechanism of TMOs-based tandem OLEDs.展开更多
Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tand...Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tandem organic light emitting diodes(OLEDs) is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of(0.40, 0.35) at 100 cd/m2 and(0.36, 0.34) at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.展开更多
A numerical model for bilayer organic light-emitting diodes (OLEDs) is developed under the basis of trapped charge limited conduction.The dependences of the current density on the layer thickness,trap properties and c...A numerical model for bilayer organic light-emitting diodes (OLEDs) is developed under the basis of trapped charge limited conduction.The dependences of the current density on the layer thickness,trap properties and carrier mobility of the hole transport layer (HTL) and emission layer (EML) in bilayer OLEDs of the structure anode/HTL/EML/cathode are numerically investigated.It is found that,for given values of the total thickness of organic layers,reduced depth of trap,total density of trap,and carrier mobility of HTL as well as EML,there exists an optimal thickness ratio of HTL to EML,by which a maximal quantum efficiency can be achieved.Through optimization of the thickness ratio,an enhancement of current density and quantum efficiency of as much as two orders of magnitude can be obtained.The dependences of the optimal thickness ratio to the characteristic trap energy,total density of trap and carrier mobility are numerically analyzed.展开更多
In this paper, a significant enhancement in current efficiency of the green tandem organic light-emitting diodes(TOLEDs) is demonstrated, which is based on a buffer-modified charge generation layer(CGL) of fullerene c...In this paper, a significant enhancement in current efficiency of the green tandem organic light-emitting diodes(TOLEDs) is demonstrated, which is based on a buffer-modified charge generation layer(CGL) of fullerene carbon(C60)/zinc-phthalocyanine(ZnPc). Al and MoO3 were used as the buffer-modified layers on both sides of the bilayer C60/ZnPc, respectively. Experimental results show that the inserted Al and MoO3 layers can effectively increase the electron extraction of the CGL for obtaining the device performance enhancement. Compared with that of the green TOLEDs without buffer-modified layers in CGL(37.3 cd·A-1), the current efficiency of the green TOLEDs is increased to 54.1 cd·A-1. Further study results find that the performance can also be improved by optimizing the thickness of Al in the CGL. The maximum current efficiency and maximum luminance of the green TOLEDs achieve 63.5 cd·A-1 and 17 873 cd·m-2, respectively, when the multilayer structure of the CGL is Al(3 nm)/C60(5 nm)/ZnPc(5 nm)/MoO3(3 nm).展开更多
A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,0...A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.展开更多
The optical transmission（200--2000 nm）, sheet resistance and work functions of indium-tin oxide（ITO）（100 Ω/）, ITO（12 Ω/）, zinc-oxide（ZnO）, aluminum-doped ZnO（AZO） and polyaniline（PANI） films were inves...The optical transmission（200--2000 nm）, sheet resistance and work functions of indium-tin oxide（ITO）（100 Ω/）, ITO（12 Ω/）, zinc-oxide（ZnO）, aluminum-doped ZnO（AZO） and polyaniline（PANI） films were investigated. Near-infrared organic light-emitting diodes（NIR-OLEDs） emitting around 1.54 μm based on Er（DBM）3Phen with ITO（100 Ω/）, ITO（12 Ω/） and PANI as anodes, respectively, were fabricated. The device structure was anode/4＂-tris（N-3-methylphenyl-N-phenyl-amino）-triphenylamine（m-MTDATA）/ N,N＇-di-l-naphthyl- N,N＇-diphenylbenzidine（NPB）/Er（DBM）3Phen/tris-（8-hydroxyquinoline） aluminum（Alq3）/A1. The results suggest that the performance of NIR-OLEDs with ITO（100 Ω/）, which has a lower Sn content, as anodes appear to be better than that of NIR-OLEDs with ITO（12 Ω/） and PANI as anodes, respectively. The high N1R transmittance of ITO（100 Ω/） is a major reason for the relatively high NIR EL efficiency. The more balanced holes and electrons in the device based on ITO（100 Ω/） are another reasons.展开更多
By using p-bis（p - N, N-diphenyl-aminostyryl）benzene doped 2-tert-butyl-9, 10-bis-β-naphthyl）-anthracene as an emitting layer, we fabricate a high-efficiency and long-lifetime blue organic light emitting diode wit...By using p-bis（p - N, N-diphenyl-aminostyryl）benzene doped 2-tert-butyl-9, 10-bis-β-naphthyl）-anthracene as an emitting layer, we fabricate a high-efficiency and long-lifetime blue organic light emitting diode with a maximum external quantum efficiency of 6.19% and a stable lifetime at a high initial current density of 0.0375 A/cm2. We demonstrate that the change in the thicknesses of organic layers affects the operating voltage and luminous efficiency greater than the lifetime. The lifetime being independent of thickness is beneficial in achieving high-quality full-colour display devices and white lighting sources with multi-emitters.展开更多
Indium tin oxide （ITO） ultrathin films were prepared on glass substrate by DC （direct current） magnetron sputtering technique with the assistance of H2O vapor to avoid potential surface damage. The film properties...Indium tin oxide （ITO） ultrathin films were prepared on glass substrate by DC （direct current） magnetron sputtering technique with the assistance of H2O vapor to avoid potential surface damage. The film properties were characterized by X-ray diffraction （XRD） technique, four-point probe method and spectrophotometer. The results show that the deposited ITO film with introduced H2O during sputtering process was almost amorphous. The average visible light transmission of 100 nm ITO film was around 85% and square resistivity was below 80 Ω/square. The film was used as the transparent anode to fabricate an inverted top-emitting organic light-emitting diodes （IT-OLEDs） with the structure of glass substrate/Alq3 （40 nm）/NPB （15 nm）/CuPc （x nm）/ITO anode （100 nm）, where the film thickness of CuPc was optimized. It was found that the luminance of this IT-OLEDs was improved from 25 cd/m^2 to more than 527 cd/m^2 by increasing the thickness of CuPc, and luminance efficiency of 0.24 lm/W at 100 cd/m^2 was obtained, which indicated that the optimized thickness of CuPc layer was around 15 nm.展开更多
White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The...White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The optical properties of Cz6F, PVK, and PVK：Cz6F blends are studied. Single and double layer devices are fabri- cated by using PVK： Cz6F blends, and the device with the configuration of indium tin oxide （ITO）/PVK：Cz6F/ tris（8-hydroxyquinolinate）aluminium （Alq3）/LiF/A1 exhibits white light emission with Commission Internationale de l＇Eclairage chromaticity coordinates of （0.30, 0.33） and a brightness of 402 cd/m^2. The investigation reveals that the white light is composed of a blue-green emission originating from the excimer of Cz6F molecules and a red emission from an electroplex from the PVK：Cz6F blend films.展开更多
The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has be...The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has been demonstrated to achieve a high efficiency, high color rendering index(CRI), and low voltage trade-off.The device exhibits a maximum total efficiency of 41.5 lm W^(-1), the highest among hybrid WOLEDs with n-type ILs. In addition, high CRIs(80–88) at practical luminances(C1000 cd m^(-2)) have been obtained, satisfying the demand for indoor lighting. Remarkably, a CRI of 88 is the highest among hybrid WOLEDs. Moreover, the device exhibits low voltages, with a turn-on voltage of only 2.5 V([1 cd m^(-2)), which is the lowest among hybrid WOLEDs. The intrinsic working mechanism of the device has also been explored; in particular, the role of n-type ILs in regulating the distribution of charges and excitons has been unveiled. The findings demonstrate that the introduction of n-type ILs is effective in developing high-performance hybrid WOLEDs.展开更多
Organic field-effect transistors(OFETs) based on organic micro-/nanocrystals have been widely reported with charge carrier mobility exceeding 1.0 cm^2V^(-1)s^(-1), demonstrating great potential for high-performance, l...Organic field-effect transistors(OFETs) based on organic micro-/nanocrystals have been widely reported with charge carrier mobility exceeding 1.0 cm^2V^(-1)s^(-1), demonstrating great potential for high-performance, low-cost organic electronic applications. However, fabrication of large-area organic micro-/nanocrystal arrays with consistent crystal growth direction has posed a significant technical challenge. Here, we describe a solution-processed dip-coating technique to grow large-area, aligned 9,10-bis(phenylethynyl) anthracene(BPEA) and 6,13-bis(triisopropylsilylethynyl) pentacene(TIPSPEN) single-crystalline nanoribbon arrays. The method is scalable to a 5 9 10 cm^2 wafer substrate, with around 60% of the wafer surface covered by aligned crystals. The quality of crystals can be easily controlled by tuning the dip-coating speed. Furthermore, OFETs based on well-aligned BPEA and TIPS-PEN single-crystalline nanoribbons were constructed.By optimizing channel lengths and using appropriate metallic electrodes, the BPEA and TIPS-PEN-based OFETs showed hole mobility exceeding 2.0 cm^2V^(-1)s^(-1)(average mobility 1.2 cm^2V^(-1)s^(-1)) and 3.0 cm^2V^(-1)s^(-1)(average mobility2.0 cm^2V^(-1)s^(-1)), respectively. They both have a high on/off ratio(I_(on)/I_(off))>10~9. The performance can well satisfy the requirements for light-emitting diodes driving.展开更多
Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The ...Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The holeblocking properties of these Zn Pc layers slowed the hole injection process into the Alq3 emissive layer greatly and thus reduced the production of unstable cationic Alq3(Alq3^+)species.This led to the enhanced brightness and efficiency when compared with the corresponding properties of OLEDs based on the popular poly-(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)buffer layer.Furthermore,because of the high thermal and chemical stabilities of these Zn Pcs,a nonaqueous film fabrication process was realized together with improved charge balance in the OLEDs and enhanced OLED lifetimes.展开更多
A 10-nm-thick molybdenum tri-oxide（MoO3） thin film was used as the interconnector layer in tandem organic lightemitting devices（OLEDs）.The tandem OLEDs with two identical emissive units consisting of N,N-bis（naph...A 10-nm-thick molybdenum tri-oxide（MoO3） thin film was used as the interconnector layer in tandem organic lightemitting devices（OLEDs）.The tandem OLEDs with two identical emissive units consisting of N,N-bis（naphthalen-1-yl）N,N-bis（phenyl）-benzidine（NPB） /tris（8-hydroxyquinoline） aluminum（Alq3） exhibited current efficiency-current density characteristics superior to the conventional single-unit devices.At 20 mA/cm2,the current efficiency of the tandem OLEDs using the interconnector layers of MoO3 thin film was about 4.0 cd/A,which is about twice that of the corresponding conventional single-unit device（1.8cd/A）.The tandem OLED showed a higher power efficiency than the conventional single-unit device for luminance over 1200cd/m2.The experimental results demonstrated that a MoO3 thin film with a proper thickness can be used as an effective interconnector layer in tandem OLEDs.Such an interconnector layer can be easily fabricated by simple thermal evaporation,greatly simplifying the device processing and fabrication processes required by previously reported interconnector layers.A possible explanation was proposed for the carrier generation of the MoO3 interconnector layer.展开更多
In this study the performance of organic light-emitting diodes （OLEDs） are enhanced significantly, which is based on dual electron transporting layers （13phen/CuPc）. By adjusting the thicknesses of Bphen and CuPc,...In this study the performance of organic light-emitting diodes （OLEDs） are enhanced significantly, which is based on dual electron transporting layers （13phen/CuPc）. By adjusting the thicknesses of Bphen and CuPc, the maximal luminescence, the maximal current efficiency, and the maximal power efficiency of the device reach 17570 cd/m^2 at 11 V, and 5.39 cd/A and 3.39 lm/W at 3.37 mA/cm^2 respectively, which are enhanced approximately by 33.4%, 39.3%, and 68.9%, respectively, compared with those of the device using Bphen only for an electron transporting layer. These results may provide some valuable references for improving the electron injection and the transportation of OLED.展开更多
A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device e...A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.展开更多
Through experiments and computer simulation,the influence of the energy levels of organic materials and electrode materials in the organic light-emitting diodes (OLEDs) on the device performances is discussed.Results ...Through experiments and computer simulation,the influence of the energy levels of organic materials and electrode materials in the organic light-emitting diodes (OLEDs) on the device performances is discussed.Results show that the device performances are influenced by not only the carrier injection barriers at the electrode interface but also the barriers at the organic heterojunction interface.This result is helpful to the selection of the organic materials and their arrangement in the optimal design of OLEDs.展开更多
We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transpor...We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transporting layer in blue organic light emitting diodes. As an exciton feedback layer （EFL）, the BAlq does not act as a traditional hole blocking effect. The design of this kind of device structure can greatly reduce excitons＇ quenching due to accumulated space charge at the exciton formation interface. Meanwhile, the non-radiative energy transfer from EFL to the EML can also be utilized to enhance the excitons＇ formation, which is confirmed by the test of photolumimescent transient lifetime decay and electroluminescence enhancement of these devices. Accordingly, the optimal device presents the improved performances with the maximum current efficiency of 4.2 cd/A and the luminance of 24600cd/m2, which are about 1.45 times and 1.75 times higher than those of device A （control device） without the EFL, respectively. Simultaneously, the device shows an excellent color stability with a tiny offset of the CIE coordinates （△x = ±0.003, △y = ±0.004） and a relatively lower efficiency roll-off of 26.2% under the driving voltage varying from 3 V to 10 V.展开更多
This paper utilizes multilayer organic light-emitting diodes with a thin layer of dye molecules to study the mech- anism of charge trapping under different electric regimes. It demonstrates that the carrier trapping w...This paper utilizes multilayer organic light-emitting diodes with a thin layer of dye molecules to study the mech- anism of charge trapping under different electric regimes. It demonstrates that the carrier trapping was independent of the current density in devices using fluorescent material as the emitting molecule while this process was exactly opposite when phosphorescent material was used. The triplet-triplet annihilation and dissociation of excitons into free charge carriers was considered to contribute to the decrease in phosphorescent emission under high electric fields. Moreover, the fluorescent dye molecule with a lower energy gap and ionized potential than the host emitter was observed to facilitate the carrier trapping mechanism, and it would produce photon emission.展开更多
High efficiency, stable organic light-emitting diodes （OLEDs） based on 2-pheyl-4＇-carbazole-9-H-Thioxanthen-9- one-10, 10-dioxide （TXO-PhCz） with different doping concentration are constructed. The stability of t...High efficiency, stable organic light-emitting diodes （OLEDs） based on 2-pheyl-4＇-carbazole-9-H-Thioxanthen-9- one-10, 10-dioxide （TXO-PhCz） with different doping concentration are constructed. The stability of the encap- sulated devices are investigated in detail. The devices with the 10 wt% doped TXO-PhCz emitter layer （EML） show the best performance with a current efficiency of 52.1 cd/A, a power efficiency of 32.71re^W, and an external quantum efficiency （EQE） of 17.7%. The devices based on the lOwt%-doped TXO-PhCz EML show the best operational stability with a half-life time （LTSO） of 8Oh, which is 8 h longer than that of the reference devices based on fac-tris（2-phenylpyridinato）iridium（ Ⅲ） （Ir（ppy）a）. These indicate excellent stability of TXO-PhCz for redox and oxidation processes under electrical excitation and TXO-PhCz can be potentially used as the emitters for OLEDs with high efficiency and excellent stability. The high-performance device based on TXO-PhCz with high stability can be further improved by the optimization of the encapsulation technology and the development of a new host for TXO-PhCz.展开更多
White organic light-emitting diodes were fabricated by using a novel phosphorescence bis（1,2-diphenyl-1H-benzoimidazole）iridium（acetylacetonate）[（pbi）2Ir（acac）] as sensitizer and a fluorescent dye of 4- （dicy...White organic light-emitting diodes were fabricated by using a novel phosphorescence bis（1,2-diphenyl-1H-benzoimidazole）iridium（acetylacetonate）[（pbi）2Ir（acac）] as sensitizer and a fluorescent dye of 4- （dicyanomethylene）-2-t-butyl-6-（1,1,7,7-tetramethyljulolidyl-9-enyl）-4H-pyran （DCJTB） codoped into a carbazole polymer of poly（N-vinylcarbazole） （PVK）. Through characterizing the UV-Vis absorption spectra, the photoluminescence spectra of （pbi）2Ir（acac） and DCJTB, and the electroluminescence spectral properties of the WOLEDs, the energy transfer mechanisms of the codoped polymer system were deduced. The results demonstrate that the luminescent spectra with different intensity of （pbi）2Ir（acac） and DCJTB were co-existent in the EL spectra of the blended system, which is ascribed to an incomplete energy transfer process in the EL process. The efficient Forster and Dexter energy transfer between the host and the guests enabled a strong yellow emission from （pbi）2Ir（acac） and DCJTB, where （pbi）2Ir（acac） plays an important role as a phosphorescent sensitizer for DCJTB. With the blue emitting-layer of N,N＇-diphenyl-N,N＇-bis（1- naphthyl）（1,1＇-biphenyl）-4,4＇-diamine, the codoped system device achieved white emission. The codoped system showed that its Commissions Internationale de 1＇Eclairage coordinates were more independent of the variation of bias voltage than those of phosphorescent doped PVK systems.展开更多
基金supported by the National Natural Science Foundation of China(Nos.11265013,11264033)the Research Fund for the Doctoral Program of Higher Education of China(No.20110211110005)the Science Research Foundation of Tianshui Normal University(No.TSA1108)
文摘By utilizing a two-step process to express the charge generation and separation mechanism of the transition metal oxides （TMOs） interconnector layer, a numerical model was proposed for tandem organic light emitting diodes （OLEDs） with a TMOs thin film as the interconnector layer. This model is valid not only for an n-type TMOs interconnector layer, but also for a p-type TMOs interconnector layer. Based on this model, the influences of different carrier injection barriers at the interface of the electrode/organic layer on the charge generation ability of interconnector layers were studied. In addition, the distribution characteristics of carrier concentration, electric field intensity and potential in the device under different carrier injection barriers were studied. The results show that when keeping one carrier injection barrier as a constant while increasing another carrier injection barrier, carri- ers injected into the device were gradually decreased, the carrier generation ability of the interconnector layer was gradually reduced, the electric field intensity at the interface of the organic/electrode was gradually enhanced, and the electric field distribution became nearly linear： the voltage drops in two light units gradually became the same. Meanwhile, the carrier injection ability decreased as another carrier injection barrier increased. The simulation re- sults agree with the experimental data. The obtained results can provide us with a deep understanding of the work mechanism of TMOs-based tandem OLEDs.
基金Project supported by the National Natural Science Foundation of China （Grant No. 60906022）, the Natural Science Foundation of Tianjin, China （Grant No. 10JCYBJC01100）, the Scientific Developing Foundation of Tianjin Education Commission, China （Grant No. 2011ZD02）, and the Tianjin Natural Science
文摘Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tandem organic light emitting diodes(OLEDs) is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of(0.40, 0.35) at 100 cd/m2 and(0.36, 0.34) at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.
文摘A numerical model for bilayer organic light-emitting diodes (OLEDs) is developed under the basis of trapped charge limited conduction.The dependences of the current density on the layer thickness,trap properties and carrier mobility of the hole transport layer (HTL) and emission layer (EML) in bilayer OLEDs of the structure anode/HTL/EML/cathode are numerically investigated.It is found that,for given values of the total thickness of organic layers,reduced depth of trap,total density of trap,and carrier mobility of HTL as well as EML,there exists an optimal thickness ratio of HTL to EML,by which a maximal quantum efficiency can be achieved.Through optimization of the thickness ratio,an enhancement of current density and quantum efficiency of as much as two orders of magnitude can be obtained.The dependences of the optimal thickness ratio to the characteristic trap energy,total density of trap and carrier mobility are numerically analyzed.
基金supported by the Scientific and Technological Research Foundation of Chongqing Municipal Education Commission(No.KJ1600439)the Basic and Advanced Technology Research Project of Chongqing Municipality(No.cstc2018jcyjAX0462)the Scientific and Technological Research Foundation of Chongqing Municipal Education Commission(No.KJ1500404)
文摘In this paper, a significant enhancement in current efficiency of the green tandem organic light-emitting diodes(TOLEDs) is demonstrated, which is based on a buffer-modified charge generation layer(CGL) of fullerene carbon(C60)/zinc-phthalocyanine(ZnPc). Al and MoO3 were used as the buffer-modified layers on both sides of the bilayer C60/ZnPc, respectively. Experimental results show that the inserted Al and MoO3 layers can effectively increase the electron extraction of the CGL for obtaining the device performance enhancement. Compared with that of the green TOLEDs without buffer-modified layers in CGL(37.3 cd·A-1), the current efficiency of the green TOLEDs is increased to 54.1 cd·A-1. Further study results find that the performance can also be improved by optimizing the thickness of Al in the CGL. The maximum current efficiency and maximum luminance of the green TOLEDs achieve 63.5 cd·A-1 and 17 873 cd·m-2, respectively, when the multilayer structure of the CGL is Al(3 nm)/C60(5 nm)/ZnPc(5 nm)/MoO3(3 nm).
基金the National Natural Science Foundation of China (Grant Nos.61204087, 61306099)the Guangdong Natural Science Foundation (Grant No. S2012040007003)+2 种基金China Postdoctoral Science Foundation (2013M531841)the Fundamental Research Funds for the Central Universities (2014ZM0003, 2014ZM0034, 2014ZM0037, 2014ZZ0028)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20120172120008)
文摘A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.
基金Supported by the National Natural Science Foundation of China(No.60807009)Specialized Research Fund for the Doctoral Program of Higher Education of China(No.200801411038)Young Teacher Foundation of Dalian University of Technology,China(No.3005-893212)
文摘The optical transmission（200--2000 nm）, sheet resistance and work functions of indium-tin oxide（ITO）（100 Ω/）, ITO（12 Ω/）, zinc-oxide（ZnO）, aluminum-doped ZnO（AZO） and polyaniline（PANI） films were investigated. Near-infrared organic light-emitting diodes（NIR-OLEDs） emitting around 1.54 μm based on Er（DBM）3Phen with ITO（100 Ω/）, ITO（12 Ω/） and PANI as anodes, respectively, were fabricated. The device structure was anode/4＂-tris（N-3-methylphenyl-N-phenyl-amino）-triphenylamine（m-MTDATA）/ N,N＇-di-l-naphthyl- N,N＇-diphenylbenzidine（NPB）/Er（DBM）3Phen/tris-（8-hydroxyquinoline） aluminum（Alq3）/A1. The results suggest that the performance of NIR-OLEDs with ITO（100 Ω/）, which has a lower Sn content, as anodes appear to be better than that of NIR-OLEDs with ITO（12 Ω/） and PANI as anodes, respectively. The high N1R transmittance of ITO（100 Ω/） is a major reason for the relatively high NIR EL efficiency. The more balanced holes and electrons in the device based on ITO（100 Ω/） are another reasons.
基金Project supported by the Science Fund of Science and Technology Commission of Shanghai Municipality,China (GrantNo. 10dz1140502)the Innovation Key Project of Education Commission of Shanghai Municipality,China (Grant No. 12ZZ091)the National Natural Science Foundation of China (Grant Nos. 61006005 and 61136003)
文摘By using p-bis（p - N, N-diphenyl-aminostyryl）benzene doped 2-tert-butyl-9, 10-bis-β-naphthyl）-anthracene as an emitting layer, we fabricate a high-efficiency and long-lifetime blue organic light emitting diode with a maximum external quantum efficiency of 6.19% and a stable lifetime at a high initial current density of 0.0375 A/cm2. We demonstrate that the change in the thicknesses of organic layers affects the operating voltage and luminous efficiency greater than the lifetime. The lifetime being independent of thickness is beneficial in achieving high-quality full-colour display devices and white lighting sources with multi-emitters.
基金supported by the National Natural Science Foundation of China under Grants No.60425101Young Excellence Project of University of Electronic Science and Technology of China(UESTC-060206)project.
文摘Indium tin oxide （ITO） ultrathin films were prepared on glass substrate by DC （direct current） magnetron sputtering technique with the assistance of H2O vapor to avoid potential surface damage. The film properties were characterized by X-ray diffraction （XRD） technique, four-point probe method and spectrophotometer. The results show that the deposited ITO film with introduced H2O during sputtering process was almost amorphous. The average visible light transmission of 100 nm ITO film was around 85% and square resistivity was below 80 Ω/square. The film was used as the transparent anode to fabricate an inverted top-emitting organic light-emitting diodes （IT-OLEDs） with the structure of glass substrate/Alq3 （40 nm）/NPB （15 nm）/CuPc （x nm）/ITO anode （100 nm）, where the film thickness of CuPc was optimized. It was found that the luminance of this IT-OLEDs was improved from 25 cd/m^2 to more than 527 cd/m^2 by increasing the thickness of CuPc, and luminance efficiency of 0.24 lm/W at 100 cd/m^2 was obtained, which indicated that the optimized thickness of CuPc layer was around 15 nm.
基金Project supported by the National Basic Research Program of China (Grant No. 2009CB623605)the National Natural Science Foundation of China (Grant No. 50673035)Program for New Century Excellent Talents in Universities of Ministry of Education,the 111 Project (Grant No. B06009)
文摘White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The optical properties of Cz6F, PVK, and PVK：Cz6F blends are studied. Single and double layer devices are fabri- cated by using PVK： Cz6F blends, and the device with the configuration of indium tin oxide （ITO）/PVK：Cz6F/ tris（8-hydroxyquinolinate）aluminium （Alq3）/LiF/A1 exhibits white light emission with Commission Internationale de l＇Eclairage chromaticity coordinates of （0.30, 0.33） and a brightness of 402 cd/m^2. The investigation reveals that the white light is composed of a blue-green emission originating from the excimer of Cz6F molecules and a red emission from an electroplex from the PVK：Cz6F blend films.
基金the National Key Research and Development Program of China (Grant No. 2016YFF02033604)the Guangdong Natural Science Foundation (Grant Nos. 2014A030310253, 2016A030310360)+2 种基金the Fundamental Research Funds for the Central Universities (Grant No. 2015ZM070)the National Natural Science Foundation of China (Grant No. 51602065)the Guangdong Science and Technology Plan (Grant Nos. 2016A040403037, 2016A010101026)
文摘The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has been demonstrated to achieve a high efficiency, high color rendering index(CRI), and low voltage trade-off.The device exhibits a maximum total efficiency of 41.5 lm W^(-1), the highest among hybrid WOLEDs with n-type ILs. In addition, high CRIs(80–88) at practical luminances(C1000 cd m^(-2)) have been obtained, satisfying the demand for indoor lighting. Remarkably, a CRI of 88 is the highest among hybrid WOLEDs. Moreover, the device exhibits low voltages, with a turn-on voltage of only 2.5 V([1 cd m^(-2)), which is the lowest among hybrid WOLEDs. The intrinsic working mechanism of the device has also been explored; in particular, the role of n-type ILs in regulating the distribution of charges and excitons has been unveiled. The findings demonstrate that the introduction of n-type ILs is effective in developing high-performance hybrid WOLEDs.
基金supported by the National Basic Research Program of China(2013CB933500)National Natural Science Foundation of China(Grant Nos.61422403,51672180,51622306,21673151)+2 种基金Qing Lan ProjectCollaborative Innovation Center of Suzhou Nano Science and Technology(NANO-CIC)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Organic field-effect transistors(OFETs) based on organic micro-/nanocrystals have been widely reported with charge carrier mobility exceeding 1.0 cm^2V^(-1)s^(-1), demonstrating great potential for high-performance, low-cost organic electronic applications. However, fabrication of large-area organic micro-/nanocrystal arrays with consistent crystal growth direction has posed a significant technical challenge. Here, we describe a solution-processed dip-coating technique to grow large-area, aligned 9,10-bis(phenylethynyl) anthracene(BPEA) and 6,13-bis(triisopropylsilylethynyl) pentacene(TIPSPEN) single-crystalline nanoribbon arrays. The method is scalable to a 5 9 10 cm^2 wafer substrate, with around 60% of the wafer surface covered by aligned crystals. The quality of crystals can be easily controlled by tuning the dip-coating speed. Furthermore, OFETs based on well-aligned BPEA and TIPS-PEN single-crystalline nanoribbons were constructed.By optimizing channel lengths and using appropriate metallic electrodes, the BPEA and TIPS-PEN-based OFETs showed hole mobility exceeding 2.0 cm^2V^(-1)s^(-1)(average mobility 1.2 cm^2V^(-1)s^(-1)) and 3.0 cm^2V^(-1)s^(-1)(average mobility2.0 cm^2V^(-1)s^(-1)), respectively. They both have a high on/off ratio(I_(on)/I_(off))>10~9. The performance can well satisfy the requirements for light-emitting diodes driving.
基金Project supported by the Shenzhen Personal Maker Project,China(Grant No.GRCK2017082316173208)the Shenzhen Overseas High-level Talents Innovation Plan of Technical Innovation,China(Grant No.KQJSCX20180323140712012)the Special Funds for the Development of Strategic Emerging Industries in Shenzhen,China(Grant No.JCJY20170818154457845)
文摘Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The holeblocking properties of these Zn Pc layers slowed the hole injection process into the Alq3 emissive layer greatly and thus reduced the production of unstable cationic Alq3(Alq3^+)species.This led to the enhanced brightness and efficiency when compared with the corresponding properties of OLEDs based on the popular poly-(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)buffer layer.Furthermore,because of the high thermal and chemical stabilities of these Zn Pcs,a nonaqueous film fabrication process was realized together with improved charge balance in the OLEDs and enhanced OLED lifetimes.
基金Project supported by the Doctoral Foundation of the Ministry of Education of China (Grant No. 20100171110025)the State Key Laboratory of Optoelectronic Materials and Technologies,China (Grant No. 2010-RC-3-1)the Fundamental Research Funds for the Central Universities,China (Grant No. 09lgpy25)
文摘A 10-nm-thick molybdenum tri-oxide（MoO3） thin film was used as the interconnector layer in tandem organic lightemitting devices（OLEDs）.The tandem OLEDs with two identical emissive units consisting of N,N-bis（naphthalen-1-yl）N,N-bis（phenyl）-benzidine（NPB） /tris（8-hydroxyquinoline） aluminum（Alq3） exhibited current efficiency-current density characteristics superior to the conventional single-unit devices.At 20 mA/cm2,the current efficiency of the tandem OLEDs using the interconnector layers of MoO3 thin film was about 4.0 cd/A,which is about twice that of the corresponding conventional single-unit device（1.8cd/A）.The tandem OLED showed a higher power efficiency than the conventional single-unit device for luminance over 1200cd/m2.The experimental results demonstrated that a MoO3 thin film with a proper thickness can be used as an effective interconnector layer in tandem OLEDs.Such an interconnector layer can be easily fabricated by simple thermal evaporation,greatly simplifying the device processing and fabrication processes required by previously reported interconnector layers.A possible explanation was proposed for the carrier generation of the MoO3 interconnector layer.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60906022 and 60876046)the Tianjin Natural Science Foundation of China (Grant No. 10JCYBJC01100)
文摘In this study the performance of organic light-emitting diodes （OLEDs） are enhanced significantly, which is based on dual electron transporting layers （13phen/CuPc）. By adjusting the thicknesses of Bphen and CuPc, the maximal luminescence, the maximal current efficiency, and the maximal power efficiency of the device reach 17570 cd/m^2 at 11 V, and 5.39 cd/A and 3.39 lm/W at 3.37 mA/cm^2 respectively, which are enhanced approximately by 33.4%, 39.3%, and 68.9%, respectively, compared with those of the device using Bphen only for an electron transporting layer. These results may provide some valuable references for improving the electron injection and the transportation of OLED.
文摘A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.
文摘Through experiments and computer simulation,the influence of the energy levels of organic materials and electrode materials in the organic light-emitting diodes (OLEDs) on the device performances is discussed.Results show that the device performances are influenced by not only the carrier injection barriers at the electrode interface but also the barriers at the organic heterojunction interface.This result is helpful to the selection of the organic materials and their arrangement in the optimal design of OLEDs.
基金Supported by the National Natural Science Foundation of China under Grant No 60906022the Natural Science Foundation of Tianjin under Grant No 10JCYBJC01100+1 种基金the Scientific Developing Foundation of Tianjin Education Commission under Grant No 2011ZD02the Key Science and Technology Support Program of Tianjin under Grant No 14ZCZDGX00006
文摘We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transporting layer in blue organic light emitting diodes. As an exciton feedback layer （EFL）, the BAlq does not act as a traditional hole blocking effect. The design of this kind of device structure can greatly reduce excitons＇ quenching due to accumulated space charge at the exciton formation interface. Meanwhile, the non-radiative energy transfer from EFL to the EML can also be utilized to enhance the excitons＇ formation, which is confirmed by the test of photolumimescent transient lifetime decay and electroluminescence enhancement of these devices. Accordingly, the optimal device presents the improved performances with the maximum current efficiency of 4.2 cd/A and the luminance of 24600cd/m2, which are about 1.45 times and 1.75 times higher than those of device A （control device） without the EFL, respectively. Simultaneously, the device shows an excellent color stability with a tiny offset of the CIE coordinates （△x = ±0.003, △y = ±0.004） and a relatively lower efficiency roll-off of 26.2% under the driving voltage varying from 3 V to 10 V.
基金Project supported by the Key Project of Shanghai Education Committee (Grant No. 08ZZ42)Science and Technology Commission of Shanghai Municipal (Grant Nos. 08PJ14053,08DZ1140702 and 08520511200)
文摘This paper utilizes multilayer organic light-emitting diodes with a thin layer of dye molecules to study the mech- anism of charge trapping under different electric regimes. It demonstrates that the carrier trapping was independent of the current density in devices using fluorescent material as the emitting molecule while this process was exactly opposite when phosphorescent material was used. The triplet-triplet annihilation and dissociation of excitons into free charge carriers was considered to contribute to the decrease in phosphorescent emission under high electric fields. Moreover, the fluorescent dye molecule with a lower energy gap and ionized potential than the host emitter was observed to facilitate the carrier trapping mechanism, and it would produce photon emission.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61420106002,51373189,61178061,and 61227008the Hundred Talents Program of the Chinese Academy of Sciences,the National Basic Research Program of China under Grant No 2014CB932600the Start-Up Fund of the Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences
文摘High efficiency, stable organic light-emitting diodes （OLEDs） based on 2-pheyl-4＇-carbazole-9-H-Thioxanthen-9- one-10, 10-dioxide （TXO-PhCz） with different doping concentration are constructed. The stability of the encap- sulated devices are investigated in detail. The devices with the 10 wt% doped TXO-PhCz emitter layer （EML） show the best performance with a current efficiency of 52.1 cd/A, a power efficiency of 32.71re^W, and an external quantum efficiency （EQE） of 17.7%. The devices based on the lOwt%-doped TXO-PhCz EML show the best operational stability with a half-life time （LTSO） of 8Oh, which is 8 h longer than that of the reference devices based on fac-tris（2-phenylpyridinato）iridium（ Ⅲ） （Ir（ppy）a）. These indicate excellent stability of TXO-PhCz for redox and oxidation processes under electrical excitation and TXO-PhCz can be potentially used as the emitters for OLEDs with high efficiency and excellent stability. The high-performance device based on TXO-PhCz with high stability can be further improved by the optimization of the encapsulation technology and the development of a new host for TXO-PhCz.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.60425101）, the Program for the New Century Excellent Talents in University of Ministry of Education of China （No.NCET-06-0812）, and the Young Talent Project of University of Electronic Science and Technology of China （No.060206）.
文摘White organic light-emitting diodes were fabricated by using a novel phosphorescence bis（1,2-diphenyl-1H-benzoimidazole）iridium（acetylacetonate）[（pbi）2Ir（acac）] as sensitizer and a fluorescent dye of 4- （dicyanomethylene）-2-t-butyl-6-（1,1,7,7-tetramethyljulolidyl-9-enyl）-4H-pyran （DCJTB） codoped into a carbazole polymer of poly（N-vinylcarbazole） （PVK）. Through characterizing the UV-Vis absorption spectra, the photoluminescence spectra of （pbi）2Ir（acac） and DCJTB, and the electroluminescence spectral properties of the WOLEDs, the energy transfer mechanisms of the codoped polymer system were deduced. The results demonstrate that the luminescent spectra with different intensity of （pbi）2Ir（acac） and DCJTB were co-existent in the EL spectra of the blended system, which is ascribed to an incomplete energy transfer process in the EL process. The efficient Forster and Dexter energy transfer between the host and the guests enabled a strong yellow emission from （pbi）2Ir（acac） and DCJTB, where （pbi）2Ir（acac） plays an important role as a phosphorescent sensitizer for DCJTB. With the blue emitting-layer of N,N＇-diphenyl-N,N＇-bis（1- naphthyl）（1,1＇-biphenyl）-4,4＇-diamine, the codoped system device achieved white emission. The codoped system showed that its Commissions Internationale de 1＇Eclairage coordinates were more independent of the variation of bias voltage than those of phosphorescent doped PVK systems.
