We employ the block negative dislocation model to invert the distribution of fault coupling and slip rate deficit on the different segments of the Tanlu(Tancheng-Lujiang) fault zone, according to the GPS horizontal ve...We employ the block negative dislocation model to invert the distribution of fault coupling and slip rate deficit on the different segments of the Tanlu(Tancheng-Lujiang) fault zone, according to the GPS horizontal velocity field from 1991 to 2007(the first phase) and 2013 to 2018(the second phase). By comparing the deformation characteristics results, we discuss the relationship between the deformation characteristics with the M earthquake in Japan. The results showed that the fault coupling rate of the northern section of Tancheng in the second phase reduced compared with that in the first phase. However, the results of the two phases showed that the northern section of Juxian still has a high coupling rate, a deep blocking depth, and a dextral compressive deficit, which is the enrapture section of the 1668 Tancheng earthquake. At the same time, the area strain results show that the strain rate of the central and eastern regions of the second phase is obviously enhanced compared with that of the first phase. The occurrence of the great earthquake in Japan has played a specific role in alleviating the strain accumulation in the middle and south sections of the Tanlu fault zone. The results of the maximum shear strain show that the shear strain in the middle section of the Tanlu fault zone in the second phase is weaker than that in the first phase, and the maximum shear strain in the southern section is stronger than that in the first phase. The fault coupling coefficient of the south Sihong to Jiashan section is high, and it is also the unruptured section of historical earthquakes. At the same time, small earthquakes in this area are not active and accumulate stress easily, so the future earthquake risk deserves attention.展开更多
Tectonic stress fields are the key drivers of tectonic events and the evolution of regional structures.The tectonic stress field evolution of the Tanlu fault zone in Shandong Province,located in the east of the North ...Tectonic stress fields are the key drivers of tectonic events and the evolution of regional structures.The tectonic stress field evolution of the Tanlu fault zone in Shandong Province,located in the east of the North China Craton(NCC),may have preserved records of the NCC’s tectonic history.Borehole television survey and hydraulic fracturing were conducted to analyze the paleo and present tectonic stress fields.Three groups of tensile fractures were identified via borehole television,their azimuths being NNW-SSE,NW-SE and NE-SW,representing multiple stages of tectonic events.Hydraulic fracturing data indicates that the study region is experiencing NEE-SWW-oriented compression and nearly-N-Soriented extension,in accordance with strike-slip and compression.Since the Cretaceous,the orientation of the extensional stress has evolved counterclockwise and sequentially from nearly-NW-SE-oriented to NE-SW-oriented and even nearly N-S-oriented,the stress state having transitioned from strike-slip-extension to strike-slip-compression,in association with the rotating and oblique subduction of the Pacific Plate beneath the NCC,with the participation of the Indian Plate.展开更多
The basin marginal fault system is the key to understand the formation and evolution of Songliao Basin.In order to investigate the influence of marginal fault system on the structural evolution of Songliao Basin,a com...The basin marginal fault system is the key to understand the formation and evolution of Songliao Basin.In order to investigate the influence of marginal fault system on the structural evolution of Songliao Basin,a comprehensive study was conducted on Shiling Town and Zhuanshanhu area of Yehe Town in Siping City of Jilin Province,where is the southeastern margin of the Songliao Basin and there are a series of well-exposed fault,fold and intrusive bodies belonging to the main marginal fault system of the Songliao Basin known as the Jiamusi-Yitong(Jia-Yi)fault zone.Through profile measurement and field investigation,samples with various lithologies and distinctive features were collected.Detailed field and laboratory works include component and microstructure analysis of these samples,rock-rock contact analysis,main strike measurement and statistics analysis.These data reveal the structural characteristics of the fold,fault and intrusive bodies in the study area.The research results show that the folds are distributed in the Mesozoic strata near the main fault of the eastern branch of the Jia-Yi fault zone,and the folded strata involve the Cretaceous Denglouku and Quantou formations.In addition,the section is dominated by high-angle strikeslip thrust faults.Light-colored veins and dark-colored veins are extensively distributed in the exposed granites.Statistical analysis of joint and fault attitudes in the study area reveals a right-lateral strike-sliping along the main fault.The large-scale right-lateral strike-slip and thrust fault system in Shiling Town occurred in right-lateral transpressive stage in Late Cretaceous.Based on the results above,tectonic evolution sequence in Shiling section of the Jia-Yi fault zone during the Mesozoic can be divided into five stages:Middle Jurassic left-lateral ductile strike-slip stage,Late Jurassic compression stage,Early Cretaceous tension stage,Early Cretaceous extension stage and Late Cretaceous right-lateral transpressive stage.These may have important constraint on understanding the Mesozoic evolution of the Songliao Basin.展开更多
Five samples of muscovite from mylonites of the earlier Tanlu ductile shear zone on the eastern margin of the Dabie Mountains yield 40Ar/39Ar ages ranging from 178 Ma to 196 Ma. Three of them have reliable plateau age...Five samples of muscovite from mylonites of the earlier Tanlu ductile shear zone on the eastern margin of the Dabie Mountains yield 40Ar/39Ar ages ranging from 178 Ma to 196 Ma. Three of them have reliable plateau ages of 188.7±0.7 Ma, 189.7±0.6 Ma and 192.5±0.7 Ma respectively, which indicates a syn-orogenic, sinistral strike-slip thermal event. This displacement movement derived from the continent-continent collision of the North and South China blocks took place in the Early Jurassic and after uplifting of high-pressure to ultrahigh-pressure slabs to the mid-crust. It is suggested that during the collision the Tanlu fault zone was an intracontinental transform fault caused by differential subduction speeds. The 40Ar/39Ar ages of mylonite whole-rock and muscovite from the later Tanlu ductile shear zone suggest another sinistral strike-slip cooling event at 128 Ma. During this strike-slip faulting, large-scale intrusion and doming uplift occurred in the eastern part of the Dabie orogenic belt. Data of K-feldspar 40Ar/39Ar MDD and apatite fission-track analysis from metamorphic rocks indicate two high-speed cooling events experienced by the Tanlu fault zone, which took place at 90 Ma and 45-58 Ma respectively. They correspond respectively to two phases of extensional activities in the Late Cretaceous and Eogene as well as development of the Qianshan fault-controlled basin to the east of the Tanlu fault zone. The cooling times recorded by K-feldspar and apatite show that the uplifting in the Dabie orogenic belt occured earlier than that on the eastern margin occupied by the Tanlu fault zone. The above phenomena suggest that the uplifting of the Dabie orogenic belt during the Late Cretaceous to Eogene was not controlled by the Tanlu normal faulting, but as a result of the lithospheric delamination.展开更多
Abstract: There are a group of large and medium-scale Meso-Cenozoic petroliferous basins along both sides of the Tanlu fault or within the fault zone, e.g., the Songliao basin, the Bohai Bay basin and the Subei-Yellow...Abstract: There are a group of large and medium-scale Meso-Cenozoic petroliferous basins along both sides of the Tanlu fault or within the fault zone, e.g., the Songliao basin, the Bohai Bay basin and the Subei-Yellow Sea basin. As shown by studies of the structural types, sedimentary formations, volcanic activities, tectonic evolution as well as the time-space relationship between the Tanlu fault zone and the basins, the formation and distribution of the basins are controlled by the movement of the Tanlu fault. This paper presents an analysis of the tectono-geometric, kinematic and geodynamic features of the basins on the basis of integrated geological-geophysical data, and an exploration into the internal relations between the fault and the basins as well as the formation mechanism and geodynamic processes of the basins.展开更多
Since the mid-late Eocene, North China has been subjected to extensional stress, resulting in the formation and development of basins. The dynamic origin of this crustal extension has long been an issue of debate. Thi...Since the mid-late Eocene, North China has been subjected to extensional stress, resulting in the formation and development of basins. The dynamic origin of this crustal extension has long been an issue of debate. This paper presents the results of kinematic analyses of faults obtained from two seperated areas in North China. In the Weihe graben situated on the southernmost margin of the Ordos block, analyses of fault kinematics were coupled with an analysis of the basin's subsidence history. Three successive extensional tectonic phases accompaning the basin's formation and development have been distinguished. The Palaeogene extension was oriented in a WNW-ESE direction; the Neogene extension in a NE-SW direction and the Pliocene-Quaternary extension in a NW-SE direction. Such changes have also been recorded by fault kinematics along the southern Tanlu fault zone. This has been demonstrated by three successive sets of fault striations indicating normal dip slip resulting from NW-SE extension, then left-lateral slip with a normal component resulting from NE-SW extension, and right-lateral slip with a minor normal component, respectively. The kinematic history of faults and their chronological evolution indicate changes in continental dynamics acting in North China over Cenozoic time.展开更多
On the condition that the velocity ratio of compressive wave to shear wave is stable during the propagating process of seismic wave, this paper develops an estimation method for medium quality factor based on single s...On the condition that the velocity ratio of compressive wave to shear wave is stable during the propagating process of seismic wave, this paper develops an estimation method for medium quality factor based on single station＇s travel time difference between direct S and P waves and the first period signal of direct P wave. 8 774 high SNR wave data altogether recorded by 75 stations are analyzed. The results show that： （1） under the normal regional stress field, the quality factors QmsP in the stable tectonic area are higher than that in the active tectonic area around the Weifang-Jiashan section and its surrounding area in the Tanlu fault zone; （2） in the Juxian-Tancheng section the seismic wave attenuation is relatively quick, and the media is relatively broken, suggesting no tectonic stress accumulation; （3） the Xinyi-Sihong section is currently locking and in accumulating elastic strain energy stage, which has the deep environment and conditions of strong earthquake generation similar to those of the 1668 M8.5 Tancheng strong earthquake.展开更多
By means of differentiation of remote sensing image, field seismo-geological survey, analysis on drilling explora- tion materials, sampling and dating of rock samples, combined with seismicity and microscopic tectoni...By means of differentiation of remote sensing image, field seismo-geological survey, analysis on drilling explora- tion materials, sampling and dating of rock samples, combined with seismicity and microscopic tectonic analysis, this paper studies the recent activity of Chihe segment of the Tanlu fault zone. The result indicates that the Chihe fault segment undergoes the deformation alternately in the mode of stick slip and creep during Late Quaternary, and its recent activity is mainly creep.展开更多
Tanlu fault zone(TLFZ)is the largest active fault zone in eastern China.It is characterized by complex tectonic evolution and multiple faults and marks the boundary between the North and South China blocks.An indepth ...Tanlu fault zone(TLFZ)is the largest active fault zone in eastern China.It is characterized by complex tectonic evolution and multiple faults and marks the boundary between the North and South China blocks.An indepth understanding of the distinct crustal structures of both parts of the TLFZ will provide valuable insights into the lithospheric and crustal thinning in eastern China,extensive magmatism since the Mesozoic,and formation mechanisms of metallogenic belts along the Yangtze River.In this study,a two-layer H-κstacking approach was adopted to estimate the thicknesses of the sediment and crystalline crust as well as the corresponding vP/vS ratios based on high-quality teleseismic P-wave receiver functions recorded by permanent and temporary stations in and around the TLFZ.The geological units in the study region were delineated,especially the crustal structures beneath extensive sedimentary basins on both sides of the TLFZ.The following conclusions can be drawn:(1)The crustal thickness in and around the TLFZ greatly varies depending on the segment.In the northern segment,the crust is relatively thin beneath the eastern part of the Songliao Basin,a broad uplift of the Moho can be observed,and the Moho descends from south to north.The crust below the central and southern segments becomes thinner from west to east.The thickness of the crust is less than 30 km toward the eastern side of the boundary between the Jiangsu and Anhui provinces,that is,significantly thinner than in other areas.In terms of the vP/vS ratios,high anomalies were detected in the central-southern segments of the TLFZ,indicating the upwelling of deep mantle magma via deep faults.(2)Positive isostatic gravity anomalies were observed in the eastern part of the northern segment of the TLFZ and in the eastern part of the Suwan segment.The crustal thickness is smaller than that obtained from the Airy model of isostasy.This suggests that the lower crust in this area may have experienced intensive transformation processes,which may be related to crustal thinning(caused by crustal extension)and the strong uplift of the mantle in eastern China.The isostatic gravity anomalies between the eastern and western parts of the TLFZ indicate that the fault zone plays a dominant role in controlling the development of the deep crustal structure.(3)Significant crustal thinning was observed beneath the eastern part of the boundary between the Jiangsu and Anhui provinces in the southern segment of the TLFZ,suggesting that this area is prone to lithospheric thinning of the North China Craton.Due to the subduction,compression,and retreat of the Paleo-Pacific Plate during the Yanshanian Period as well as the dehydration of subducting oceanic crust(within subduction zones),the asthenosphere and oceanic crust in eastern China partially melted,resulting in mantle enrichment.The basic magma from the mantle is accumulated at the base of the crust,leading to magmatic underplating.In areas with weak topography toward the east of the TLFZ,magma rises to the upper crust and surface,resulting in the enrichment of multiple metal deposits in this area.展开更多
As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the ...As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the TLFZ has been an earthquake-prone area in eastern China where several major earthquakes resulted by tectonic compression occurred,causing tremendous casualties and significant economic losses.Many studies on different segments of the TLFZ have been carried out in the past few decades.However,numerous key questions regarding the fault zone remain unanswered due to a lack of clear subsurface characterization and fault delineation.In this study,we present high-resolution tomographic results across the TLFZ to the east of Hefei,where one 22-km-long passive seismic array with densely spaced short-period nodes,and a 24-km-long magnetotelluric array were deployed adjacent to each other.We find the velocity and resistivity variations are highly consistent with known surface geology.Sharp property contrasts in both the seismic shear wave velocity and electrical resistivity profiles clearly delineate the Tanlu F1 fault(TLF-1)near Hefei.More interestingly,an upwelling with distinct high velocity is imaged within the Hefei Basin to the west of the TLF-1,whereas a slanted block with lowvelocity and low-resistivity seems to cut into or thrust upon the high-grade to low-grade middle-pressure rocks in the Zhangbaling uplift right below the Tanlu F2 ductile shear fault(TLF-2).The presented results show a new approach to characterize deep subsurface structure of the TLFZ beyond 2-km depths using passive data,which it is often difficult for active seismic surveys with refracted and reflected waves to image.展开更多
We estimated Moho depth beneath the southern Tanlu fault zone and its adjacent area using common-conversion-point(CCP)stacking of receiver functions,which were computed from teleseismic records of the CEArray.Our esti...We estimated Moho depth beneath the southern Tanlu fault zone and its adjacent area using common-conversion-point(CCP)stacking of receiver functions,which were computed from teleseismic records of the CEArray.Our estimated Moho depth matches well with 2-D profiles derived from active-source deep seismic reflection surveys,suggesting that the calculated the Moho depth map is likely accurate beyond the 2-D profiles.Overall,the estimated Moho depth map showed a high spatial correlation with tectonic provinces,i.e.,Moho topographic boundaries are in good agreement with geological boundaries.Beneath the Dabie orogenic belt and the mountainous areas in southern Anhui Province,the Moho lies relatively deep,and there is an obvious difference in Moho depth between the two sides of this segment of the Tanlu fault.We further selected four depth profiles with dense instrumentation to show Moho depth changes across different tectonic blocks in the study area.We saw two step-like changes in Moho depth beneath the Xiangfan-Guangji and Gushi-Feizhong,which run parallel along the WNW-ESE direction and delineate the southern and northern bounds of the northern Dabie orogenic belt,which is likely the suture zone between the North China Block and South China Block.Crust beneath the northeast corner of the study area is significantly thinner than other areas,which is consistent with the crustal detachment model proposed for suturing between the North and South China blocks in the region east to the Tanlu fault.展开更多
Using recent data of geoscience transaction in Northeast China, the author analyses and studies the crust-upper mantle structure feature of the North Tanlu fault zone. The result shows the crust-mantle structure are o...Using recent data of geoscience transaction in Northeast China, the author analyses and studies the crust-upper mantle structure feature of the North Tanlu fault zone. The result shows the crust-mantle structure are obvious difference at both sides of the North Tanlu fault zone. The fault activity and segmentation are closely related with abruptly change zone of the crust-upper mantle structure. There is a clear mirror image relationship between the big geomorphic shape and asthenosphere undulate, the former restricts tectonic stability and tectonic style of dif- ferent crustal units. The significantly strengthening seismicity of north set and south set in the North Tanlu fault zone just correspond to the low-velocity and high conductivity layer of crust-upper mantle. In the North Tanlu fault zone, the main controlling structure of the mid-strong seismic generally consists of the active fault sectors, whose crust-mantle structure is more complicated in rigidity massif.展开更多
As the most influential strike-slip fault in East China,the Tancheng-Lujiang fault zone draws scholars attention for its strong seismic activity. Nevertheless,most research has been conducted along segments in Shandon...As the most influential strike-slip fault in East China,the Tancheng-Lujiang fault zone draws scholars attention for its strong seismic activity. Nevertheless,most research has been conducted along segments in Shandong Province and Bohai Bay where huge earthquakes occur frequently. Meanwhile,it is generally believed that segments lying to the south of Huaihe River have been inactive since the late Quaternary and thus it is incapable of generating moderate or strong earthquakes. However,these understandings about the Tancheng-Lujiang fault have been questioned by our recent work for part of the fault south to the Huaihe River. Based on interpretation of high-resolution satellite images,detailed field investigations near Wuhe county and Mingguang City in northern Anhui Province and elaborate microstructure analysis, we come to the conclusion that the Tancheng-Lujiang fault zone mainly consists of four branches and at least one should be active since the late Pleistocene for the Wuhe-Mingguang section. This segment is monopolized by dextral strike-slip motion in late Quaternary. Different from obvious faults in bed rocks or consolidated sediments,the latest activity trace in Quaternary loose sediment revealed by trench excavation is not obvious or even invisible to visual observation. According to our recent work and previous studies, we call for more attention to be paid to invisible faults in young sediment and also suggest that more research be conducted along this seemingly placid segment.展开更多
On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collec...On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.展开更多
基金supported by the National Natural Science Foundation of China (Grand number 41802224)the Youth Program of Seismological Science and Technology Spark Program of China Earthquake Administration (Grand No. XH23019YC)the Joint Open Fund of National Geophysical Observation and Research Station in Mengcheng, Anhui Province (Grand No. MENGO-202114)。
文摘We employ the block negative dislocation model to invert the distribution of fault coupling and slip rate deficit on the different segments of the Tanlu(Tancheng-Lujiang) fault zone, according to the GPS horizontal velocity field from 1991 to 2007(the first phase) and 2013 to 2018(the second phase). By comparing the deformation characteristics results, we discuss the relationship between the deformation characteristics with the M earthquake in Japan. The results showed that the fault coupling rate of the northern section of Tancheng in the second phase reduced compared with that in the first phase. However, the results of the two phases showed that the northern section of Juxian still has a high coupling rate, a deep blocking depth, and a dextral compressive deficit, which is the enrapture section of the 1668 Tancheng earthquake. At the same time, the area strain results show that the strain rate of the central and eastern regions of the second phase is obviously enhanced compared with that of the first phase. The occurrence of the great earthquake in Japan has played a specific role in alleviating the strain accumulation in the middle and south sections of the Tanlu fault zone. The results of the maximum shear strain show that the shear strain in the middle section of the Tanlu fault zone in the second phase is weaker than that in the first phase, and the maximum shear strain in the southern section is stronger than that in the first phase. The fault coupling coefficient of the south Sihong to Jiashan section is high, and it is also the unruptured section of historical earthquakes. At the same time, small earthquakes in this area are not active and accumulate stress easily, so the future earthquake risk deserves attention.
基金supported by the National Natural Science Foundation of China(Grant No.41574088)the Key Program of Chinese Central Government for Basic Scientific Research Operations in Commonwealth Research Institutes(Grant No.ZDJ2019-16)。
文摘Tectonic stress fields are the key drivers of tectonic events and the evolution of regional structures.The tectonic stress field evolution of the Tanlu fault zone in Shandong Province,located in the east of the North China Craton(NCC),may have preserved records of the NCC’s tectonic history.Borehole television survey and hydraulic fracturing were conducted to analyze the paleo and present tectonic stress fields.Three groups of tensile fractures were identified via borehole television,their azimuths being NNW-SSE,NW-SE and NE-SW,representing multiple stages of tectonic events.Hydraulic fracturing data indicates that the study region is experiencing NEE-SWW-oriented compression and nearly-N-Soriented extension,in accordance with strike-slip and compression.Since the Cretaceous,the orientation of the extensional stress has evolved counterclockwise and sequentially from nearly-NW-SE-oriented to NE-SW-oriented and even nearly N-S-oriented,the stress state having transitioned from strike-slip-extension to strike-slip-compression,in association with the rotating and oblique subduction of the Pacific Plate beneath the NCC,with the participation of the Indian Plate.
基金Supported by the Key Research and Development Program of Heilongjiang Province(No.JD22A022)the Natural Science Foundation of Heilongjiang Province of China(Nos.LH2022D013,LH2023D005)the Support Project for Young Talents in Local Universities in Heilongjiang Province(No.14011202101).
文摘The basin marginal fault system is the key to understand the formation and evolution of Songliao Basin.In order to investigate the influence of marginal fault system on the structural evolution of Songliao Basin,a comprehensive study was conducted on Shiling Town and Zhuanshanhu area of Yehe Town in Siping City of Jilin Province,where is the southeastern margin of the Songliao Basin and there are a series of well-exposed fault,fold and intrusive bodies belonging to the main marginal fault system of the Songliao Basin known as the Jiamusi-Yitong(Jia-Yi)fault zone.Through profile measurement and field investigation,samples with various lithologies and distinctive features were collected.Detailed field and laboratory works include component and microstructure analysis of these samples,rock-rock contact analysis,main strike measurement and statistics analysis.These data reveal the structural characteristics of the fold,fault and intrusive bodies in the study area.The research results show that the folds are distributed in the Mesozoic strata near the main fault of the eastern branch of the Jia-Yi fault zone,and the folded strata involve the Cretaceous Denglouku and Quantou formations.In addition,the section is dominated by high-angle strikeslip thrust faults.Light-colored veins and dark-colored veins are extensively distributed in the exposed granites.Statistical analysis of joint and fault attitudes in the study area reveals a right-lateral strike-sliping along the main fault.The large-scale right-lateral strike-slip and thrust fault system in Shiling Town occurred in right-lateral transpressive stage in Late Cretaceous.Based on the results above,tectonic evolution sequence in Shiling section of the Jia-Yi fault zone during the Mesozoic can be divided into five stages:Middle Jurassic left-lateral ductile strike-slip stage,Late Jurassic compression stage,Early Cretaceous tension stage,Early Cretaceous extension stage and Late Cretaceous right-lateral transpressive stage.These may have important constraint on understanding the Mesozoic evolution of the Songliao Basin.
基金The research was supported by the National Natural Science Foundation of China(Grant 40272094).
文摘Five samples of muscovite from mylonites of the earlier Tanlu ductile shear zone on the eastern margin of the Dabie Mountains yield 40Ar/39Ar ages ranging from 178 Ma to 196 Ma. Three of them have reliable plateau ages of 188.7±0.7 Ma, 189.7±0.6 Ma and 192.5±0.7 Ma respectively, which indicates a syn-orogenic, sinistral strike-slip thermal event. This displacement movement derived from the continent-continent collision of the North and South China blocks took place in the Early Jurassic and after uplifting of high-pressure to ultrahigh-pressure slabs to the mid-crust. It is suggested that during the collision the Tanlu fault zone was an intracontinental transform fault caused by differential subduction speeds. The 40Ar/39Ar ages of mylonite whole-rock and muscovite from the later Tanlu ductile shear zone suggest another sinistral strike-slip cooling event at 128 Ma. During this strike-slip faulting, large-scale intrusion and doming uplift occurred in the eastern part of the Dabie orogenic belt. Data of K-feldspar 40Ar/39Ar MDD and apatite fission-track analysis from metamorphic rocks indicate two high-speed cooling events experienced by the Tanlu fault zone, which took place at 90 Ma and 45-58 Ma respectively. They correspond respectively to two phases of extensional activities in the Late Cretaceous and Eogene as well as development of the Qianshan fault-controlled basin to the east of the Tanlu fault zone. The cooling times recorded by K-feldspar and apatite show that the uplifting in the Dabie orogenic belt occured earlier than that on the eastern margin occupied by the Tanlu fault zone. The above phenomena suggest that the uplifting of the Dabie orogenic belt during the Late Cretaceous to Eogene was not controlled by the Tanlu normal faulting, but as a result of the lithospheric delamination.
文摘Abstract: There are a group of large and medium-scale Meso-Cenozoic petroliferous basins along both sides of the Tanlu fault or within the fault zone, e.g., the Songliao basin, the Bohai Bay basin and the Subei-Yellow Sea basin. As shown by studies of the structural types, sedimentary formations, volcanic activities, tectonic evolution as well as the time-space relationship between the Tanlu fault zone and the basins, the formation and distribution of the basins are controlled by the movement of the Tanlu fault. This paper presents an analysis of the tectono-geometric, kinematic and geodynamic features of the basins on the basis of integrated geological-geophysical data, and an exploration into the internal relations between the fault and the basins as well as the formation mechanism and geodynamic processes of the basins.
基金supported by the programmes"Dynamique et Billan de la Terre","Imageric et Structure de la Terre"(Tectoscope)of In-stitut National des Sciences de l'Univers(INSU)and Centre National de la Recherche Scientifiquc(Paris,France).
文摘Since the mid-late Eocene, North China has been subjected to extensional stress, resulting in the formation and development of basins. The dynamic origin of this crustal extension has long been an issue of debate. This paper presents the results of kinematic analyses of faults obtained from two seperated areas in North China. In the Weihe graben situated on the southernmost margin of the Ordos block, analyses of fault kinematics were coupled with an analysis of the basin's subsidence history. Three successive extensional tectonic phases accompaning the basin's formation and development have been distinguished. The Palaeogene extension was oriented in a WNW-ESE direction; the Neogene extension in a NE-SW direction and the Pliocene-Quaternary extension in a NW-SE direction. Such changes have also been recorded by fault kinematics along the southern Tanlu fault zone. This has been demonstrated by three successive sets of fault striations indicating normal dip slip resulting from NW-SE extension, then left-lateral slip with a normal component resulting from NE-SW extension, and right-lateral slip with a minor normal component, respectively. The kinematic history of faults and their chronological evolution indicate changes in continental dynamics acting in North China over Cenozoic time.
基金supported by National Natural Science Foundation of China(grant No.40974031)Shandong Provincial Natural Science Foundation(grant No.Y2007E09)Jiangsu Provincial Social Development Project(grant No.BE2009691)
文摘On the condition that the velocity ratio of compressive wave to shear wave is stable during the propagating process of seismic wave, this paper develops an estimation method for medium quality factor based on single station＇s travel time difference between direct S and P waves and the first period signal of direct P wave. 8 774 high SNR wave data altogether recorded by 75 stations are analyzed. The results show that： （1） under the normal regional stress field, the quality factors QmsP in the stable tectonic area are higher than that in the active tectonic area around the Weifang-Jiashan section and its surrounding area in the Tanlu fault zone; （2） in the Juxian-Tancheng section the seismic wave attenuation is relatively quick, and the media is relatively broken, suggesting no tectonic stress accumulation; （3） the Xinyi-Sihong section is currently locking and in accumulating elastic strain energy stage, which has the deep environment and conditions of strong earthquake generation similar to those of the 1668 M8.5 Tancheng strong earthquake.
基金Natural Science Foundation of Anhui Province (01045403) and Joint Seismological Science Foundation of China (102038).
文摘By means of differentiation of remote sensing image, field seismo-geological survey, analysis on drilling explora- tion materials, sampling and dating of rock samples, combined with seismicity and microscopic tectonic analysis, this paper studies the recent activity of Chihe segment of the Tanlu fault zone. The result indicates that the Chihe fault segment undergoes the deformation alternately in the mode of stick slip and creep during Late Quaternary, and its recent activity is mainly creep.
文摘Tanlu fault zone(TLFZ)is the largest active fault zone in eastern China.It is characterized by complex tectonic evolution and multiple faults and marks the boundary between the North and South China blocks.An indepth understanding of the distinct crustal structures of both parts of the TLFZ will provide valuable insights into the lithospheric and crustal thinning in eastern China,extensive magmatism since the Mesozoic,and formation mechanisms of metallogenic belts along the Yangtze River.In this study,a two-layer H-κstacking approach was adopted to estimate the thicknesses of the sediment and crystalline crust as well as the corresponding vP/vS ratios based on high-quality teleseismic P-wave receiver functions recorded by permanent and temporary stations in and around the TLFZ.The geological units in the study region were delineated,especially the crustal structures beneath extensive sedimentary basins on both sides of the TLFZ.The following conclusions can be drawn:(1)The crustal thickness in and around the TLFZ greatly varies depending on the segment.In the northern segment,the crust is relatively thin beneath the eastern part of the Songliao Basin,a broad uplift of the Moho can be observed,and the Moho descends from south to north.The crust below the central and southern segments becomes thinner from west to east.The thickness of the crust is less than 30 km toward the eastern side of the boundary between the Jiangsu and Anhui provinces,that is,significantly thinner than in other areas.In terms of the vP/vS ratios,high anomalies were detected in the central-southern segments of the TLFZ,indicating the upwelling of deep mantle magma via deep faults.(2)Positive isostatic gravity anomalies were observed in the eastern part of the northern segment of the TLFZ and in the eastern part of the Suwan segment.The crustal thickness is smaller than that obtained from the Airy model of isostasy.This suggests that the lower crust in this area may have experienced intensive transformation processes,which may be related to crustal thinning(caused by crustal extension)and the strong uplift of the mantle in eastern China.The isostatic gravity anomalies between the eastern and western parts of the TLFZ indicate that the fault zone plays a dominant role in controlling the development of the deep crustal structure.(3)Significant crustal thinning was observed beneath the eastern part of the boundary between the Jiangsu and Anhui provinces in the southern segment of the TLFZ,suggesting that this area is prone to lithospheric thinning of the North China Craton.Due to the subduction,compression,and retreat of the Paleo-Pacific Plate during the Yanshanian Period as well as the dehydration of subducting oceanic crust(within subduction zones),the asthenosphere and oceanic crust in eastern China partially melted,resulting in mantle enrichment.The basic magma from the mantle is accumulated at the base of the crust,leading to magmatic underplating.In areas with weak topography toward the east of the TLFZ,magma rises to the upper crust and surface,resulting in the enrichment of multiple metal deposits in this area.
基金This research is supported by the National Natural Science Foundation of China(No.41874048)supported by the National Key Research and Development Projects(No.2018YFC0603500).
文摘As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the TLFZ has been an earthquake-prone area in eastern China where several major earthquakes resulted by tectonic compression occurred,causing tremendous casualties and significant economic losses.Many studies on different segments of the TLFZ have been carried out in the past few decades.However,numerous key questions regarding the fault zone remain unanswered due to a lack of clear subsurface characterization and fault delineation.In this study,we present high-resolution tomographic results across the TLFZ to the east of Hefei,where one 22-km-long passive seismic array with densely spaced short-period nodes,and a 24-km-long magnetotelluric array were deployed adjacent to each other.We find the velocity and resistivity variations are highly consistent with known surface geology.Sharp property contrasts in both the seismic shear wave velocity and electrical resistivity profiles clearly delineate the Tanlu F1 fault(TLF-1)near Hefei.More interestingly,an upwelling with distinct high velocity is imaged within the Hefei Basin to the west of the TLF-1,whereas a slanted block with lowvelocity and low-resistivity seems to cut into or thrust upon the high-grade to low-grade middle-pressure rocks in the Zhangbaling uplift right below the Tanlu F2 ductile shear fault(TLF-2).The presented results show a new approach to characterize deep subsurface structure of the TLFZ beyond 2-km depths using passive data,which it is often difficult for active seismic surveys with refracted and reflected waves to image.
基金This research is supported by Spark Program of Earthquake Sciences(No.XH20026)Joint Open Fund of Mengcheng National Geophysical Observatory(No.MENGO-202014).
文摘We estimated Moho depth beneath the southern Tanlu fault zone and its adjacent area using common-conversion-point(CCP)stacking of receiver functions,which were computed from teleseismic records of the CEArray.Our estimated Moho depth matches well with 2-D profiles derived from active-source deep seismic reflection surveys,suggesting that the calculated the Moho depth map is likely accurate beyond the 2-D profiles.Overall,the estimated Moho depth map showed a high spatial correlation with tectonic provinces,i.e.,Moho topographic boundaries are in good agreement with geological boundaries.Beneath the Dabie orogenic belt and the mountainous areas in southern Anhui Province,the Moho lies relatively deep,and there is an obvious difference in Moho depth between the two sides of this segment of the Tanlu fault.We further selected four depth profiles with dense instrumentation to show Moho depth changes across different tectonic blocks in the study area.We saw two step-like changes in Moho depth beneath the Xiangfan-Guangji and Gushi-Feizhong,which run parallel along the WNW-ESE direction and delineate the southern and northern bounds of the northern Dabie orogenic belt,which is likely the suture zone between the North China Block and South China Block.Crust beneath the northeast corner of the study area is significantly thinner than other areas,which is consistent with the crustal detachment model proposed for suturing between the North and South China blocks in the region east to the Tanlu fault.
文摘Using recent data of geoscience transaction in Northeast China, the author analyses and studies the crust-upper mantle structure feature of the North Tanlu fault zone. The result shows the crust-mantle structure are obvious difference at both sides of the North Tanlu fault zone. The fault activity and segmentation are closely related with abruptly change zone of the crust-upper mantle structure. There is a clear mirror image relationship between the big geomorphic shape and asthenosphere undulate, the former restricts tectonic stability and tectonic style of dif- ferent crustal units. The significantly strengthening seismicity of north set and south set in the North Tanlu fault zone just correspond to the low-velocity and high conductivity layer of crust-upper mantle. In the North Tanlu fault zone, the main controlling structure of the mid-strong seismic generally consists of the active fault sectors, whose crust-mantle structure is more complicated in rigidity massif.
基金funded by the program of Active Faults Detection and Seismic Hazard Assessment in Hefei City,Anhui Province
文摘As the most influential strike-slip fault in East China,the Tancheng-Lujiang fault zone draws scholars attention for its strong seismic activity. Nevertheless,most research has been conducted along segments in Shandong Province and Bohai Bay where huge earthquakes occur frequently. Meanwhile,it is generally believed that segments lying to the south of Huaihe River have been inactive since the late Quaternary and thus it is incapable of generating moderate or strong earthquakes. However,these understandings about the Tancheng-Lujiang fault have been questioned by our recent work for part of the fault south to the Huaihe River. Based on interpretation of high-resolution satellite images,detailed field investigations near Wuhe county and Mingguang City in northern Anhui Province and elaborate microstructure analysis, we come to the conclusion that the Tancheng-Lujiang fault zone mainly consists of four branches and at least one should be active since the late Pleistocene for the Wuhe-Mingguang section. This segment is monopolized by dextral strike-slip motion in late Quaternary. Different from obvious faults in bed rocks or consolidated sediments,the latest activity trace in Quaternary loose sediment revealed by trench excavation is not obvious or even invisible to visual observation. According to our recent work and previous studies, we call for more attention to be paid to invisible faults in young sediment and also suggest that more research be conducted along this seemingly placid segment.
基金This study was supported by the National Key Project "Study of the Natural Gas Fault System in the Tancheng-Lujiang Fault Belt (No. 95-101-01)" of the Ninth Five-Year Plan Period and the National Natural Science Foundation of China Grant 48970172.
文摘On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.
