Despite the success of guided wave ultrasonic inspection for internal defect detection in steel pipes,its application on polyethylene(PE)pipe remains relatively unexplored.The growth of internal cracks in PE pipe seve...Despite the success of guided wave ultrasonic inspection for internal defect detection in steel pipes,its application on polyethylene(PE)pipe remains relatively unexplored.The growth of internal cracks in PE pipe severely affects its pressure-holding capacity,hence the early detection of internal cracks is crucial for effective pipeline maintenance strategies.This study extends the scope of guided wave-based ultrasonic testing to detect the growth of internal cracks in a natural gas distribution PE pipe.Laboratory experiments and a finite element model were planned to study the wave-crack interaction at different stages of axially oriented internal crack growth with a piezoceramic transducer-based setup arranged in a pitch-catch configuration.Mode dispersion analysis supplemented with preliminary experiments was performed to isolate the optimal inspection frequency,leading to the selection of the T(0,1)mode at 50-kHz for the investigation.A transmission index based on the energy of the T(0,1)mode was developed to trace the extent of simulated crack growth.The findings revealed an inverse linear correlation between the transmission index and the crack depth for crack growth beyond 20%crack depth.展开更多
Edge devices,due to their limited computational and storage resources,often require the use of compilers for program optimization.Therefore,ensuring the security and reliability of these compilers is of paramount impo...Edge devices,due to their limited computational and storage resources,often require the use of compilers for program optimization.Therefore,ensuring the security and reliability of these compilers is of paramount importance in the emerging field of edge AI.One widely used testing method for this purpose is fuzz testing,which detects bugs by inputting random test cases into the target program.However,this process consumes significant time and resources.To improve the efficiency of compiler fuzz testing,it is common practice to utilize test case prioritization techniques.Some researchers use machine learning to predict the code coverage of test cases,aiming to maximize the test capability for the target compiler by increasing the overall predicted coverage of the test cases.Nevertheless,these methods can only forecast the code coverage of the compiler at a specific optimization level,potentially missing many optimization-related bugs.In this paper,we introduce C-CORE(short for Clustering by Code Representation),the first framework to prioritize test cases according to their code representations,which are derived directly from the source codes.This approach avoids being limited to specific compiler states and extends to a broader range of compiler bugs.Specifically,we first train a scaled pre-trained programming language model to capture as many common features as possible from the test cases generated by a fuzzer.Using this pre-trained model,we then train two downstream models:one for predicting the likelihood of triggering a bug and another for identifying code representations associated with bugs.Subsequently,we cluster the test cases according to their code representations and select the highest-scoring test case from each cluster as the high-quality test case.This reduction in redundant testing cases leads to time savings.Comprehensive evaluation results reveal that code representations are better at distinguishing test capabilities,and C-CORE significantly enhances testing efficiency.Across four datasets,C-CORE increases the average of the percentage of faults detected(APFD)value by 0.16 to 0.31 and reduces test time by over 50% in 46% of cases.When compared to the best results from approaches using predicted code coverage,C-CORE improves the APFD value by 1.1% to 12.3% and achieves an overall time-saving of 159.1%.展开更多
Hepatitis D virus(HDV)can infect HBsAg-positive individuals,causing rapid fibrosis progression,early decompensation,increased hepatocellular carcinoma risk,and higher mortality than hepatitis B virus(HBV)mono-infectio...Hepatitis D virus(HDV)can infect HBsAg-positive individuals,causing rapid fibrosis progression,early decompensation,increased hepatocellular carcinoma risk,and higher mortality than hepatitis B virus(HBV)mono-infection.Most countries lack high-quality HDV prevalence data,and the collection techniques employed often bias published data.In recent meta-analyses,HDV prevalence in HBsAg-positive patients reaches 5%-15%and is even significantly higher in endemic areas.Since HBV vaccination programs were implemented,HDV prevalence has decreased among younger populations.However,owing to immigrant influx,it has increased in some Western countries.The current practice of HDV screening in HBsAg-positive individuals is stepwise,based on physician’s discretion,and limited to at-risk populations and may require numerous visits.Double reflex testing,which includes anti-HDV testing in all HBsAg-positive individuals and then HDV RNA testing for anti-HDV-positive ones,is uncommon.Reflex testing can identify more HDV infection cases and link identified patients to further care and follow-up.Moreover,laboratory-based double reflex screening is less biased than physician-led testing.Therefore,health-care providers should learn about reflex testing,and federal and provincial hepatitis control programs should implement laboratory-based double reflex testing to obtain reliable HDV prevalence estimates.The test’s cost-effectiveness depends on the number of HBV-positive patients screened to identify one HDV-positive patient.Such testing may be viable in areas with low HBsAg but high HDV prevalence.However,its economic impact on areas with low HDV prevalence needs further study.展开更多
Since the beginning of COVID-19 pandemics many countries were facing challenges with testing capacity recourse limitations. Throughout the waves of the pandemic countries were trying to address the existing constrains...Since the beginning of COVID-19 pandemics many countries were facing challenges with testing capacity recourse limitations. Throughout the waves of the pandemic countries were trying to address the existing constrains exploring solutions to increase the testing capacity with more cost-effective approaches. Pooled methodology was one of the methods which many have validated and used. It is evident that in case of pooled sample testing the sensitivity becomes lower, however the variation highly depends on the pool size as well as the incidence rate at the certain point. Armenia as well as many other countries has adopted regulations for mandatory COVID-19 PCR testing for all the travelers. Current study aimed to explore the efficiency of COVID-19 pooled PCR testing for nasopharyngeal swabs of individuals with no symptoms in a time period with good epidemiological state of the infection. Nasopharingeal swab samples from individuals were collected. The manual extraction of RNAs of samples was performed after pooling up to 5 samples. The pools with Cycle Threshold (CT) of < 37 were considered positive and were retested individually. In total 28,015 samples were grouped in 667 pools of which 57 were positive. The total number of positive samples was 65. The median difference (CT-pool–CT samples) was 2.4 (ranging from–3.0 to 8.9). The correlation of CT of pools and positive samples was positive. The correlation coefficient r = 0.84, P < 0.000, 95% CI range 0.7423 to 0.9243). The total economic saving when using pools compared to the individual testing was 72%. The minor difference between CT values of pools and samples can be explained by the dilution effect in the pool. However, the positive correlation between the values as well as the amount of cost saving demonstrate that pooling on nasopharyngeal samples for COVID-19 PCR testing can be a good method for efficient screening with significant resource saving. One of the most important advantages of the proposed method is the fact that samples are pooled prior extraction, which avoids the possibilities with misinterpretation of IC due to low yield of RNA in the extraction process.展开更多
In today’s era, where mobile devices have become an integral part of our daily lives, ensuring the security of mobile applications has become increasingly crucial. Mobile penetration testing, a specialized subfield w...In today’s era, where mobile devices have become an integral part of our daily lives, ensuring the security of mobile applications has become increasingly crucial. Mobile penetration testing, a specialized subfield within the realm of cybersecurity, plays a vital role in safeguarding mobile ecosystems against the ever-evolving landscape of threats. The ubiquity of mobile devices has made them a prime target for cybercriminals, and the data and functionality accessed through mobile applications make them valuable assets to protect. Mobile penetration testing is designed to identify vulnerabilities, weaknesses, and potential exploits within mobile applications and the devices themselves. Unlike traditional penetration testing, which often focuses on network and server security, mobile penetration testing zeroes in on the unique challenges posed by mobile platforms. Mobile penetration testing, a specialized field within cybersecurity, is an essential tool in the Cybersecurity specialists’ toolkit to protect mobile ecosystems from emerging threats. This article introduces mobile penetration testing, emphasizing its significance, including comprehensive learning labs for Android and iOS platforms, and highlighting how it distinctly differs from traditional penetration testing methodologies.展开更多
This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview ...This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.展开更多
Objective:To analyze the clinical value of non-invasive prenatal testing(NIPT)in detecting chromosomal copy number variations(CNVs)and to explore the relationship between gene expression and clinical manifestations of...Objective:To analyze the clinical value of non-invasive prenatal testing(NIPT)in detecting chromosomal copy number variations(CNVs)and to explore the relationship between gene expression and clinical manifestations of chromosomal copy number variations.Methods:3551 naturally conceived singleton pregnant women who underwent NIPT were included in this study.The NIPT revealed abnormalities other than sex chromosome abnormalities and trisomy 13,18,and 21.Pregnant women with chromosome copy number variations underwent genetic counseling and prenatal ultrasound examination.Interventional prenatal diagnosis and chromosome microarray analysis(CMA)were performed.The clinical phenotypes and pregnancy outcomes of different prenatal diagnoses were analyzed.Additionally,a follow-up was conducted by telephone to track fetal development after birth,at six months,and one year post-birth.Results:A total of 53 cases among 3551 cases showed chromosomal copy number variation.Interventional prenatal diagnosis was performed in 36 cases:27 cases were negative and 8 were consistent with the NIPT test results.This indicates that NIPT’s positive predictive value(PPV)in CNVs is 22.22%.Conclusion:NIPT has certain clinical significance in screening chromosome copy number variations and is expected to become a routine screening for chromosomal microdeletions and microduplications.However,further interventional prenatal diagnosis is still needed to identify fetal CNVs.展开更多
As science and technology continue to develop,power equipment has become an indispensable part of industrial production and daily life.Whether it is the precise automation machinery utilized on production lines or the...As science and technology continue to develop,power equipment has become an indispensable part of industrial production and daily life.Whether it is the precise automation machinery utilized on production lines or the convenient electrical appliances found in households,their functionality relies heavily on electrical technology.Nonetheless,without stringent safety and performance assurances,these devices could potentially endanger lives and property.Thus,this paper explores the development strategy for establishing a standardized system within the electrical testing service industry,aiming to ensure safety and reliability.展开更多
Confining stresses serve as a pivotal determinant in shaping the behavior of grouted rock bolts.Nonetheless,prior investigations have oversimplified the three-dimensional stress state,primarily assuming hydrostatic st...Confining stresses serve as a pivotal determinant in shaping the behavior of grouted rock bolts.Nonetheless,prior investigations have oversimplified the three-dimensional stress state,primarily assuming hydrostatic stress conditions.Under these conditions,it is assumed that the intermediate principal stress(σ_(2))equals the minimum principal stress(σ_(3)).This assumption overlooks the potential variations in magnitudes of in situ stress conditions along all three directions near an underground opening where a rock bolt is installed.In this study,a series of push tests was meticulously conducted under triaxial conditions.These tests involved applying non-uniform confining stresses(σ_(2)≠σ_(3))to cubic specimens,aiming to unveil the previously overlooked influence of intermediate principal stresses on the strength properties of rock bolts.The results show that as the confining stresses increase from zero to higher levels,the pre-failure behavior changes from linear to nonlinear forms,resulting in an increase in initial stiffness from 2.08 kN/mm to 32.51 kN/mm.The load-displacement curves further illuminate distinct post-failure behavior at elevated levels of confining stresses,characterized by enhanced stiffness.Notably,the peak load capacity ranged from 27.9 kN to 46.5 kN as confining stresses advanced from σ_(2)=σ_(3)=0 to σ_(2)=20 MPa and σ_(3)=10 MPa.Additionally,the outcomes highlight an influence of confining stress on the lateral deformation of samples.Lower levels of confinement prompt overall dilation in lateral deformation,while higher confinements maintain a state of shrinkage.Furthermore,diverse failure modes have been identified,intricately tied to the arrangement of confining stresses.Lower confinements tend to induce a splitting mode of failure,whereas higher loads bring about a shift towards a pure interfacial shear-off and shear-crushed failure mechanism.展开更多
Introduction: Exercise stress testing (on a treadmill or ergometer bicycle) is an important test in cardiology for diagnosing myocardial ischemia. This test in Mali is still in its beginning compared to other countrie...Introduction: Exercise stress testing (on a treadmill or ergometer bicycle) is an important test in cardiology for diagnosing myocardial ischemia. This test in Mali is still in its beginning compared to other countries in the sub-region. The lack of data in Mali prompted this study, which aimed to evaluate the indications of this activity and its diagnostic contribution to cardiology in Mali. Materials and Methods: This was a retrospective, descriptive study. The study was conducted at the “TOUCAM” medical clinic in Kati based on the analysis of stress test reports between January 2016 and August 2022. Result: During the study period, we documented 73 patients who underwent exercise testing on a bicycle ergometer for suspected coronary heart disease. The mean age of our patients was 47.5 ± 13.8 years (14 and 79 years). Males accounted for the majority (78.1%). The sex ratio is 3.5. More than half of our patients were overweight or obese (77.1%). Hypertension and diabetes affected 52.1% and 25.8% of patients, respectively. 20.8% of patients had coronary artery disease. renin-angiotensin-aldosterone system blockers (56.8%) and beta-blockers (51.3%). The main indications were chest pain (63.0%) and ischemia detection (15.1%). A modified STEEP protocol was used. The majority of our patients (71.2%) achieved at least 85% of their maximum theoretical heart rate. The main reason for the termination of the study was fatigue (57.3%). The average duration was 11.3 ± 4.2 minutes. 24.7% thought the stress tests were positive and 17.8% thought they were controversial. Conclusion: This study demonstrates the importance of stress testing in the diagnosis and treatment of ischemic heart disease, especially in settings where we have very limited access to coronary angiography.展开更多
Background: When continuous scale measurements are available, agreements between two measuring devices are assessed both graphically and analytically. In clinical investigations, Bland and Altman proposed plotting sub...Background: When continuous scale measurements are available, agreements between two measuring devices are assessed both graphically and analytically. In clinical investigations, Bland and Altman proposed plotting subject-wise differences between raters against subject-wise averages. In order to scientifically assess agreement, Bartko recommended combining the graphical approach with the statistical analytic procedure suggested by Bradley and Blackwood. The advantage of using this approach is that it enables significance testing and sample size estimation. We noted that the direct use of the results of the regression is misleading and we provide a correction in this regard. Methods: Graphical and linear models are used to assess agreements for continuous scale measurements. We demonstrate that software linear regression results should not be readily used and we provided correct analytic procedures. The degrees of freedom of the F-statistics are incorrectly reported, and we propose methods to overcome this problem by introducing the correct analytic form of the F statistic. Methods for sample size estimation using R-functions are also given. Results: We believe that the tutorial and the R-codes are useful tools for testing and estimating agreement between two rating protocols for continuous scale measurements. The interested reader may use the codes and apply them to their available data when the issue of agreement between two raters is the subject of interest.展开更多
Recently,researchers have shown increasing interest in combining more than one programming model into systems running on high performance computing systems(HPCs)to achieve exascale by applying parallelism at multiple ...Recently,researchers have shown increasing interest in combining more than one programming model into systems running on high performance computing systems(HPCs)to achieve exascale by applying parallelism at multiple levels.Combining different programming paradigms,such as Message Passing Interface(MPI),Open Multiple Processing(OpenMP),and Open Accelerators(OpenACC),can increase computation speed and improve performance.During the integration of multiple models,the probability of runtime errors increases,making their detection difficult,especially in the absence of testing techniques that can detect these errors.Numerous studies have been conducted to identify these errors,but no technique exists for detecting errors in three-level programming models.Despite the increasing research that integrates the three programming models,MPI,OpenMP,and OpenACC,a testing technology to detect runtime errors,such as deadlocks and race conditions,which can arise from this integration has not been developed.Therefore,this paper begins with a definition and explanation of runtime errors that result fromintegrating the three programming models that compilers cannot detect.For the first time,this paper presents a classification of operational errors that can result from the integration of the three models.This paper also proposes a parallel hybrid testing technique for detecting runtime errors in systems built in the C++programming language that uses the triple programming models MPI,OpenMP,and OpenACC.This hybrid technology combines static technology and dynamic technology,given that some errors can be detected using static techniques,whereas others can be detected using dynamic technology.The hybrid technique can detect more errors because it combines two distinct technologies.The proposed static technology detects a wide range of error types in less time,whereas a portion of the potential errors that may or may not occur depending on the 4502 CMC,2023,vol.74,no.2 operating environment are left to the dynamic technology,which completes the validation.展开更多
Test Case Prioritization(TCP)techniques perform better than other regression test optimization techniques including Test Suite Reduction(TSR)and Test Case Selection(TCS).Many TCP techniques are available,and their per...Test Case Prioritization(TCP)techniques perform better than other regression test optimization techniques including Test Suite Reduction(TSR)and Test Case Selection(TCS).Many TCP techniques are available,and their performance is usually measured through a metric Average Percentage of Fault Detection(APFD).This metric is value-neutral because it only works well when all test cases have the same cost,and all faults have the same severity.Using APFD for performance evaluation of test case orders where test cases cost or faults severity varies is prone to produce false results.Therefore,using the right metric for performance evaluation of TCP techniques is very important to get reliable and correct results.In this paper,two value-based TCP techniques have been introduced using Genetic Algorithm(GA)including Value-Cognizant Fault Detection-Based TCP(VCFDB-TCP)and Value-Cognizant Requirements Coverage-Based TCP(VCRCB-TCP).Two novel value-based performance evaluation metrics are also introduced for value-based TCP including Average Percentage of Fault Detection per value(APFDv)and Average Percentage of Requirements Coverage per value(APRCv).Two case studies are performed to validate proposed techniques and performance evaluation metrics.The proposed GA-based techniques outperformed the existing state-of-the-art TCP techniques including Original Order(OO),Reverse Order(REV-O),Random Order(RO),and Greedy algorithm.展开更多
Both unit and integration testing are incredibly crucial for almost any software application because each of them operates a distinct process to examine the product.Due to resource constraints,when software is subject...Both unit and integration testing are incredibly crucial for almost any software application because each of them operates a distinct process to examine the product.Due to resource constraints,when software is subjected to modifications,the drastic increase in the count of test cases forces the testers to opt for a test optimization strategy.One such strategy is test case prioritization(TCP).Existing works have propounded various methodologies that re-order the system-level test cases intending to boost either the fault detection capabilities or the coverage efficacy at the earliest.Nonetheless,singularity in objective functions and the lack of dissimilitude among the re-ordered test sequences have degraded the cogency of their approaches.Considering such gaps and scenarios when the meteoric and continuous updations in the software make the intensive unit and integration testing process more fragile,this study has introduced a memetics-inspired methodology for TCP.The proposed structure is first embedded with diverse parameters,and then traditional steps of the shuffled-frog-leaping approach(SFLA)are followed to prioritize the test cases at unit and integration levels.On 5 standard test functions,a comparative analysis is conducted between the established algorithms and the proposed approach,where the latter enhances the coverage rate and fault detection of re-ordered test sets.Investigation results related to the mean average percentage of fault detection(APFD)confirmed that the proposed approach exceeds the memetic,basic multi-walk,PSO,and optimized multi-walk by 21.7%,13.99%,12.24%,and 11.51%,respectively.展开更多
Conventionally,the reliability of a web portal is validated with generalized conventional methods,but they fail to provide the desired results.Therefore,we need to include other quality factors that affect reliability...Conventionally,the reliability of a web portal is validated with generalized conventional methods,but they fail to provide the desired results.Therefore,we need to include other quality factors that affect reliability such as usability for improving the reliability in addition to the conventional reliability testing.Actually,the primary objectives of web portals are to provide interactive integration of multiple functions confirming diverse requirements in an efficient way.In this paper,we employ testing profiles tomeasure the reliability through software operational profile,input space profile and usability profile along with qualitative measures of reliability and usability.Moreover,the case study used for verification is based on aweb application that facilitates information and knowledge sharing among its online members.The proposed scheme is compared with the conventional reliability improvement method in terms of failure detection and reliability.The final results unveil that the computation of reliability by using the traditional method(utilizing failure points with the assistance of Mean Time Between Failures(MTBF)and Mean Time To Failure(MTTF)becomes ineffective under certain situations.Under such situations,the proposed scheme helps to compute the reliability in an effective way.Moreover,the outcomes of the study provide insight recommendations about the testing and measurement of reliability for Web based software or applications.展开更多
Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the ...Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.展开更多
Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection ...Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection technology is both theoretically and practically useful.Road and bridge test and detection is a complicated task.With the development of science and technology,highway and bridge engineering test and detection technology has also made great progress.The continuous improvement of test and detection technology has brought good social benefits to road and bridge construction.This article discusses the problems in test and detection technology of highway bridges and how to improve the quality of test and detection.展开更多
Saliva testing is a vital method for clinical applications,for its noninvasive features,richness in substances,and the huge amount.Due to its direct anatomical connection with oral,digestive,and endocrine systems,clin...Saliva testing is a vital method for clinical applications,for its noninvasive features,richness in substances,and the huge amount.Due to its direct anatomical connection with oral,digestive,and endocrine systems,clinical usage of saliva testing for these diseases is promising.Furthermore,for other diseases that seeming to have no correlations with saliva,such as neurodegenerative diseases and psychological diseases,researchers also reckon saliva informative.Tremendous papers are being produced in this field.Updated summaries of recent literature give newcomers a shortcut to have a grasp of this topic.Here,we focused on recent research about saliva biomarkers that are derived from humans,not from other organisms.The review mostly addresses the proceedings from 2016 to 2022,to shed light on the promising usage of saliva testing in clinical diagnostics.We recap the recent advances following the category of different types of biomarkers,such as intracellular DNA,RNA,proteins and intercellular exosomes,cell-free DNA,to give a comprehensive impression of saliva biomarker testing.展开更多
In this paper, the new organization for unit testing embedding pair-wise mode is proposed with the core thought focused on the cooperation of programmer and tester by “cross-testing”. The typical content of unit tes...In this paper, the new organization for unit testing embedding pair-wise mode is proposed with the core thought focused on the cooperation of programmer and tester by “cross-testing”. The typical content of unit testing for the new organizing mode should have three aspects, including self-checking, cross-testing and independent-testing. For cross-testing, executing “pair-wise” mode, mainly tackles data testing, function testing and state testing, which function testing must be done by details and state testing must be considered for completeness. With the specializing of independent-testing, it should be taken as more rigid testing without arbitrariness. Consequently, strategy and measure are addressed for data testing focusing on boundary testing and function/state testing. And organizing method of procedure and key points of tackling unit testing are investigated for the new organizing mode. In order to assess the validity of our study and approach, a series of actual examples are demonstrated for GUI software. The result indicates that the execution of unit testing for the new organizing mode is effective and applicable.展开更多
Ultrasonic testing(UT)is increasingly combined with machine learning(ML)techniques for intelligently identifying damage.Extracting signifcant features from UT data is essential for efcient defect characterization.More...Ultrasonic testing(UT)is increasingly combined with machine learning(ML)techniques for intelligently identifying damage.Extracting signifcant features from UT data is essential for efcient defect characterization.Moreover,the hidden physics behind ML is unexplained,reducing the generalization capability and versatility of ML methods in UT.In this paper,a generally applicable ML framework based on the model interpretation strategy is proposed to improve the detection accuracy and computational efciency of UT.Firstly,multi-domain features are extracted from the UT signals with signal processing techniques to construct an initial feature space.Subsequently,a feature selection method based on model interpretable strategy(FS-MIS)is innovatively developed by integrating Shapley additive explanation(SHAP),flter method,embedded method and wrapper method.The most efective ML model and the optimal feature subset with better correlation to the target defects are determined self-adaptively.The proposed framework is validated by identifying and locating side-drilled holes(SDHs)with 0.5λcentral distance and different depths.An ultrasonic array probe is adopted to acquire FMC datasets from several aluminum alloy specimens containing two SDHs by experiments.The optimal feature subset selected by FS-MIS is set as the input of the chosen ML model to train and predict the times of arrival(ToAs)of the scattered waves emitted by adjacent SDHs.The experimental results demonstrate that the relative errors of the predicted ToAs are all below 3.67%with an average error of 0.25%,signifcantly improving the time resolution of UT signals.On this basis,the predicted ToAs are assigned to the corresponding original signals for decoupling overlapped pulse-echoes and reconstructing high-resolution FMC datasets.The imaging resolution is enhanced to 0.5λby implementing the total focusing method(TFM).The relative errors of hole depths and central distance are no more than 0.51%and 3.57%,respectively.Finally,the superior performance of the proposed FS-MIS is validated by comparing it with initial feature space and conventional dimensionality reduction techniques.展开更多
基金the financial support provided by USDOT Pipeline and Hazardous Materials Safety Administration (PHMSA)through the Competitive Academic Agreement Program (CAAP)。
文摘Despite the success of guided wave ultrasonic inspection for internal defect detection in steel pipes,its application on polyethylene(PE)pipe remains relatively unexplored.The growth of internal cracks in PE pipe severely affects its pressure-holding capacity,hence the early detection of internal cracks is crucial for effective pipeline maintenance strategies.This study extends the scope of guided wave-based ultrasonic testing to detect the growth of internal cracks in a natural gas distribution PE pipe.Laboratory experiments and a finite element model were planned to study the wave-crack interaction at different stages of axially oriented internal crack growth with a piezoceramic transducer-based setup arranged in a pitch-catch configuration.Mode dispersion analysis supplemented with preliminary experiments was performed to isolate the optimal inspection frequency,leading to the selection of the T(0,1)mode at 50-kHz for the investigation.A transmission index based on the energy of the T(0,1)mode was developed to trace the extent of simulated crack growth.The findings revealed an inverse linear correlation between the transmission index and the crack depth for crack growth beyond 20%crack depth.
文摘Edge devices,due to their limited computational and storage resources,often require the use of compilers for program optimization.Therefore,ensuring the security and reliability of these compilers is of paramount importance in the emerging field of edge AI.One widely used testing method for this purpose is fuzz testing,which detects bugs by inputting random test cases into the target program.However,this process consumes significant time and resources.To improve the efficiency of compiler fuzz testing,it is common practice to utilize test case prioritization techniques.Some researchers use machine learning to predict the code coverage of test cases,aiming to maximize the test capability for the target compiler by increasing the overall predicted coverage of the test cases.Nevertheless,these methods can only forecast the code coverage of the compiler at a specific optimization level,potentially missing many optimization-related bugs.In this paper,we introduce C-CORE(short for Clustering by Code Representation),the first framework to prioritize test cases according to their code representations,which are derived directly from the source codes.This approach avoids being limited to specific compiler states and extends to a broader range of compiler bugs.Specifically,we first train a scaled pre-trained programming language model to capture as many common features as possible from the test cases generated by a fuzzer.Using this pre-trained model,we then train two downstream models:one for predicting the likelihood of triggering a bug and another for identifying code representations associated with bugs.Subsequently,we cluster the test cases according to their code representations and select the highest-scoring test case from each cluster as the high-quality test case.This reduction in redundant testing cases leads to time savings.Comprehensive evaluation results reveal that code representations are better at distinguishing test capabilities,and C-CORE significantly enhances testing efficiency.Across four datasets,C-CORE increases the average of the percentage of faults detected(APFD)value by 0.16 to 0.31 and reduces test time by over 50% in 46% of cases.When compared to the best results from approaches using predicted code coverage,C-CORE improves the APFD value by 1.1% to 12.3% and achieves an overall time-saving of 159.1%.
文摘Hepatitis D virus(HDV)can infect HBsAg-positive individuals,causing rapid fibrosis progression,early decompensation,increased hepatocellular carcinoma risk,and higher mortality than hepatitis B virus(HBV)mono-infection.Most countries lack high-quality HDV prevalence data,and the collection techniques employed often bias published data.In recent meta-analyses,HDV prevalence in HBsAg-positive patients reaches 5%-15%and is even significantly higher in endemic areas.Since HBV vaccination programs were implemented,HDV prevalence has decreased among younger populations.However,owing to immigrant influx,it has increased in some Western countries.The current practice of HDV screening in HBsAg-positive individuals is stepwise,based on physician’s discretion,and limited to at-risk populations and may require numerous visits.Double reflex testing,which includes anti-HDV testing in all HBsAg-positive individuals and then HDV RNA testing for anti-HDV-positive ones,is uncommon.Reflex testing can identify more HDV infection cases and link identified patients to further care and follow-up.Moreover,laboratory-based double reflex screening is less biased than physician-led testing.Therefore,health-care providers should learn about reflex testing,and federal and provincial hepatitis control programs should implement laboratory-based double reflex testing to obtain reliable HDV prevalence estimates.The test’s cost-effectiveness depends on the number of HBV-positive patients screened to identify one HDV-positive patient.Such testing may be viable in areas with low HBsAg but high HDV prevalence.However,its economic impact on areas with low HDV prevalence needs further study.
文摘Since the beginning of COVID-19 pandemics many countries were facing challenges with testing capacity recourse limitations. Throughout the waves of the pandemic countries were trying to address the existing constrains exploring solutions to increase the testing capacity with more cost-effective approaches. Pooled methodology was one of the methods which many have validated and used. It is evident that in case of pooled sample testing the sensitivity becomes lower, however the variation highly depends on the pool size as well as the incidence rate at the certain point. Armenia as well as many other countries has adopted regulations for mandatory COVID-19 PCR testing for all the travelers. Current study aimed to explore the efficiency of COVID-19 pooled PCR testing for nasopharyngeal swabs of individuals with no symptoms in a time period with good epidemiological state of the infection. Nasopharingeal swab samples from individuals were collected. The manual extraction of RNAs of samples was performed after pooling up to 5 samples. The pools with Cycle Threshold (CT) of < 37 were considered positive and were retested individually. In total 28,015 samples were grouped in 667 pools of which 57 were positive. The total number of positive samples was 65. The median difference (CT-pool–CT samples) was 2.4 (ranging from–3.0 to 8.9). The correlation of CT of pools and positive samples was positive. The correlation coefficient r = 0.84, P < 0.000, 95% CI range 0.7423 to 0.9243). The total economic saving when using pools compared to the individual testing was 72%. The minor difference between CT values of pools and samples can be explained by the dilution effect in the pool. However, the positive correlation between the values as well as the amount of cost saving demonstrate that pooling on nasopharyngeal samples for COVID-19 PCR testing can be a good method for efficient screening with significant resource saving. One of the most important advantages of the proposed method is the fact that samples are pooled prior extraction, which avoids the possibilities with misinterpretation of IC due to low yield of RNA in the extraction process.
文摘In today’s era, where mobile devices have become an integral part of our daily lives, ensuring the security of mobile applications has become increasingly crucial. Mobile penetration testing, a specialized subfield within the realm of cybersecurity, plays a vital role in safeguarding mobile ecosystems against the ever-evolving landscape of threats. The ubiquity of mobile devices has made them a prime target for cybercriminals, and the data and functionality accessed through mobile applications make them valuable assets to protect. Mobile penetration testing is designed to identify vulnerabilities, weaknesses, and potential exploits within mobile applications and the devices themselves. Unlike traditional penetration testing, which often focuses on network and server security, mobile penetration testing zeroes in on the unique challenges posed by mobile platforms. Mobile penetration testing, a specialized field within cybersecurity, is an essential tool in the Cybersecurity specialists’ toolkit to protect mobile ecosystems from emerging threats. This article introduces mobile penetration testing, emphasizing its significance, including comprehensive learning labs for Android and iOS platforms, and highlighting how it distinctly differs from traditional penetration testing methodologies.
文摘This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.
基金Dongguan City Social Development Project(Project number:20161081101023)。
文摘Objective:To analyze the clinical value of non-invasive prenatal testing(NIPT)in detecting chromosomal copy number variations(CNVs)and to explore the relationship between gene expression and clinical manifestations of chromosomal copy number variations.Methods:3551 naturally conceived singleton pregnant women who underwent NIPT were included in this study.The NIPT revealed abnormalities other than sex chromosome abnormalities and trisomy 13,18,and 21.Pregnant women with chromosome copy number variations underwent genetic counseling and prenatal ultrasound examination.Interventional prenatal diagnosis and chromosome microarray analysis(CMA)were performed.The clinical phenotypes and pregnancy outcomes of different prenatal diagnoses were analyzed.Additionally,a follow-up was conducted by telephone to track fetal development after birth,at six months,and one year post-birth.Results:A total of 53 cases among 3551 cases showed chromosomal copy number variation.Interventional prenatal diagnosis was performed in 36 cases:27 cases were negative and 8 were consistent with the NIPT test results.This indicates that NIPT’s positive predictive value(PPV)in CNVs is 22.22%.Conclusion:NIPT has certain clinical significance in screening chromosome copy number variations and is expected to become a routine screening for chromosomal microdeletions and microduplications.However,further interventional prenatal diagnosis is still needed to identify fetal CNVs.
基金Tianshui City Science and Technology Support Plan Project:2023-FZJHK-2813。
文摘As science and technology continue to develop,power equipment has become an indispensable part of industrial production and daily life.Whether it is the precise automation machinery utilized on production lines or the convenient electrical appliances found in households,their functionality relies heavily on electrical technology.Nonetheless,without stringent safety and performance assurances,these devices could potentially endanger lives and property.Thus,this paper explores the development strategy for establishing a standardized system within the electrical testing service industry,aiming to ensure safety and reliability.
文摘Confining stresses serve as a pivotal determinant in shaping the behavior of grouted rock bolts.Nonetheless,prior investigations have oversimplified the three-dimensional stress state,primarily assuming hydrostatic stress conditions.Under these conditions,it is assumed that the intermediate principal stress(σ_(2))equals the minimum principal stress(σ_(3)).This assumption overlooks the potential variations in magnitudes of in situ stress conditions along all three directions near an underground opening where a rock bolt is installed.In this study,a series of push tests was meticulously conducted under triaxial conditions.These tests involved applying non-uniform confining stresses(σ_(2)≠σ_(3))to cubic specimens,aiming to unveil the previously overlooked influence of intermediate principal stresses on the strength properties of rock bolts.The results show that as the confining stresses increase from zero to higher levels,the pre-failure behavior changes from linear to nonlinear forms,resulting in an increase in initial stiffness from 2.08 kN/mm to 32.51 kN/mm.The load-displacement curves further illuminate distinct post-failure behavior at elevated levels of confining stresses,characterized by enhanced stiffness.Notably,the peak load capacity ranged from 27.9 kN to 46.5 kN as confining stresses advanced from σ_(2)=σ_(3)=0 to σ_(2)=20 MPa and σ_(3)=10 MPa.Additionally,the outcomes highlight an influence of confining stress on the lateral deformation of samples.Lower levels of confinement prompt overall dilation in lateral deformation,while higher confinements maintain a state of shrinkage.Furthermore,diverse failure modes have been identified,intricately tied to the arrangement of confining stresses.Lower confinements tend to induce a splitting mode of failure,whereas higher loads bring about a shift towards a pure interfacial shear-off and shear-crushed failure mechanism.
文摘Introduction: Exercise stress testing (on a treadmill or ergometer bicycle) is an important test in cardiology for diagnosing myocardial ischemia. This test in Mali is still in its beginning compared to other countries in the sub-region. The lack of data in Mali prompted this study, which aimed to evaluate the indications of this activity and its diagnostic contribution to cardiology in Mali. Materials and Methods: This was a retrospective, descriptive study. The study was conducted at the “TOUCAM” medical clinic in Kati based on the analysis of stress test reports between January 2016 and August 2022. Result: During the study period, we documented 73 patients who underwent exercise testing on a bicycle ergometer for suspected coronary heart disease. The mean age of our patients was 47.5 ± 13.8 years (14 and 79 years). Males accounted for the majority (78.1%). The sex ratio is 3.5. More than half of our patients were overweight or obese (77.1%). Hypertension and diabetes affected 52.1% and 25.8% of patients, respectively. 20.8% of patients had coronary artery disease. renin-angiotensin-aldosterone system blockers (56.8%) and beta-blockers (51.3%). The main indications were chest pain (63.0%) and ischemia detection (15.1%). A modified STEEP protocol was used. The majority of our patients (71.2%) achieved at least 85% of their maximum theoretical heart rate. The main reason for the termination of the study was fatigue (57.3%). The average duration was 11.3 ± 4.2 minutes. 24.7% thought the stress tests were positive and 17.8% thought they were controversial. Conclusion: This study demonstrates the importance of stress testing in the diagnosis and treatment of ischemic heart disease, especially in settings where we have very limited access to coronary angiography.
文摘Background: When continuous scale measurements are available, agreements between two measuring devices are assessed both graphically and analytically. In clinical investigations, Bland and Altman proposed plotting subject-wise differences between raters against subject-wise averages. In order to scientifically assess agreement, Bartko recommended combining the graphical approach with the statistical analytic procedure suggested by Bradley and Blackwood. The advantage of using this approach is that it enables significance testing and sample size estimation. We noted that the direct use of the results of the regression is misleading and we provide a correction in this regard. Methods: Graphical and linear models are used to assess agreements for continuous scale measurements. We demonstrate that software linear regression results should not be readily used and we provided correct analytic procedures. The degrees of freedom of the F-statistics are incorrectly reported, and we propose methods to overcome this problem by introducing the correct analytic form of the F statistic. Methods for sample size estimation using R-functions are also given. Results: We believe that the tutorial and the R-codes are useful tools for testing and estimating agreement between two rating protocols for continuous scale measurements. The interested reader may use the codes and apply them to their available data when the issue of agreement between two raters is the subject of interest.
基金[King Abdulaziz University][Deanship of Scientific Research]Grant Number[KEP-PHD-20-611-42].
文摘Recently,researchers have shown increasing interest in combining more than one programming model into systems running on high performance computing systems(HPCs)to achieve exascale by applying parallelism at multiple levels.Combining different programming paradigms,such as Message Passing Interface(MPI),Open Multiple Processing(OpenMP),and Open Accelerators(OpenACC),can increase computation speed and improve performance.During the integration of multiple models,the probability of runtime errors increases,making their detection difficult,especially in the absence of testing techniques that can detect these errors.Numerous studies have been conducted to identify these errors,but no technique exists for detecting errors in three-level programming models.Despite the increasing research that integrates the three programming models,MPI,OpenMP,and OpenACC,a testing technology to detect runtime errors,such as deadlocks and race conditions,which can arise from this integration has not been developed.Therefore,this paper begins with a definition and explanation of runtime errors that result fromintegrating the three programming models that compilers cannot detect.For the first time,this paper presents a classification of operational errors that can result from the integration of the three models.This paper also proposes a parallel hybrid testing technique for detecting runtime errors in systems built in the C++programming language that uses the triple programming models MPI,OpenMP,and OpenACC.This hybrid technology combines static technology and dynamic technology,given that some errors can be detected using static techniques,whereas others can be detected using dynamic technology.The hybrid technique can detect more errors because it combines two distinct technologies.The proposed static technology detects a wide range of error types in less time,whereas a portion of the potential errors that may or may not occur depending on the 4502 CMC,2023,vol.74,no.2 operating environment are left to the dynamic technology,which completes the validation.
文摘Test Case Prioritization(TCP)techniques perform better than other regression test optimization techniques including Test Suite Reduction(TSR)and Test Case Selection(TCS).Many TCP techniques are available,and their performance is usually measured through a metric Average Percentage of Fault Detection(APFD).This metric is value-neutral because it only works well when all test cases have the same cost,and all faults have the same severity.Using APFD for performance evaluation of test case orders where test cases cost or faults severity varies is prone to produce false results.Therefore,using the right metric for performance evaluation of TCP techniques is very important to get reliable and correct results.In this paper,two value-based TCP techniques have been introduced using Genetic Algorithm(GA)including Value-Cognizant Fault Detection-Based TCP(VCFDB-TCP)and Value-Cognizant Requirements Coverage-Based TCP(VCRCB-TCP).Two novel value-based performance evaluation metrics are also introduced for value-based TCP including Average Percentage of Fault Detection per value(APFDv)and Average Percentage of Requirements Coverage per value(APRCv).Two case studies are performed to validate proposed techniques and performance evaluation metrics.The proposed GA-based techniques outperformed the existing state-of-the-art TCP techniques including Original Order(OO),Reverse Order(REV-O),Random Order(RO),and Greedy algorithm.
文摘Both unit and integration testing are incredibly crucial for almost any software application because each of them operates a distinct process to examine the product.Due to resource constraints,when software is subjected to modifications,the drastic increase in the count of test cases forces the testers to opt for a test optimization strategy.One such strategy is test case prioritization(TCP).Existing works have propounded various methodologies that re-order the system-level test cases intending to boost either the fault detection capabilities or the coverage efficacy at the earliest.Nonetheless,singularity in objective functions and the lack of dissimilitude among the re-ordered test sequences have degraded the cogency of their approaches.Considering such gaps and scenarios when the meteoric and continuous updations in the software make the intensive unit and integration testing process more fragile,this study has introduced a memetics-inspired methodology for TCP.The proposed structure is first embedded with diverse parameters,and then traditional steps of the shuffled-frog-leaping approach(SFLA)are followed to prioritize the test cases at unit and integration levels.On 5 standard test functions,a comparative analysis is conducted between the established algorithms and the proposed approach,where the latter enhances the coverage rate and fault detection of re-ordered test sets.Investigation results related to the mean average percentage of fault detection(APFD)confirmed that the proposed approach exceeds the memetic,basic multi-walk,PSO,and optimized multi-walk by 21.7%,13.99%,12.24%,and 11.51%,respectively.
基金This study was supported by Suranaree University of Technology.
文摘Conventionally,the reliability of a web portal is validated with generalized conventional methods,but they fail to provide the desired results.Therefore,we need to include other quality factors that affect reliability such as usability for improving the reliability in addition to the conventional reliability testing.Actually,the primary objectives of web portals are to provide interactive integration of multiple functions confirming diverse requirements in an efficient way.In this paper,we employ testing profiles tomeasure the reliability through software operational profile,input space profile and usability profile along with qualitative measures of reliability and usability.Moreover,the case study used for verification is based on aweb application that facilitates information and knowledge sharing among its online members.The proposed scheme is compared with the conventional reliability improvement method in terms of failure detection and reliability.The final results unveil that the computation of reliability by using the traditional method(utilizing failure points with the assistance of Mean Time Between Failures(MTBF)and Mean Time To Failure(MTTF)becomes ineffective under certain situations.Under such situations,the proposed scheme helps to compute the reliability in an effective way.Moreover,the outcomes of the study provide insight recommendations about the testing and measurement of reliability for Web based software or applications.
基金Science Foundation Ireland(SFI)under Grant Number SFI/16/RC/3918(Confirm)and Marie Sklodowska Curie Grant agreement No.847577 co-fundedthe European Regional Development Fund.Wasif Afzal has received funding from the European Union’s Horizon 2020 research and innovation program under CMC,2023,vol.74,no.22767 Grant agreement Nos.871319,957212from the ECSEL Joint Undertaking(JU)under Grant agreement No 101007350.
文摘Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.
文摘Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection technology is both theoretically and practically useful.Road and bridge test and detection is a complicated task.With the development of science and technology,highway and bridge engineering test and detection technology has also made great progress.The continuous improvement of test and detection technology has brought good social benefits to road and bridge construction.This article discusses the problems in test and detection technology of highway bridges and how to improve the quality of test and detection.
基金funded by the National Natural Science Foundation of China(U20A20394,81870754,82272416,82202614)State Key Laboratory of Oral Diseases(2022KXK0402)Clinical and Translational Medicine Research Fund of Chinese Academy of Medical Sciences(2020-I2M-C&T-B-097)。
文摘Saliva testing is a vital method for clinical applications,for its noninvasive features,richness in substances,and the huge amount.Due to its direct anatomical connection with oral,digestive,and endocrine systems,clinical usage of saliva testing for these diseases is promising.Furthermore,for other diseases that seeming to have no correlations with saliva,such as neurodegenerative diseases and psychological diseases,researchers also reckon saliva informative.Tremendous papers are being produced in this field.Updated summaries of recent literature give newcomers a shortcut to have a grasp of this topic.Here,we focused on recent research about saliva biomarkers that are derived from humans,not from other organisms.The review mostly addresses the proceedings from 2016 to 2022,to shed light on the promising usage of saliva testing in clinical diagnostics.We recap the recent advances following the category of different types of biomarkers,such as intracellular DNA,RNA,proteins and intercellular exosomes,cell-free DNA,to give a comprehensive impression of saliva biomarker testing.
文摘In this paper, the new organization for unit testing embedding pair-wise mode is proposed with the core thought focused on the cooperation of programmer and tester by “cross-testing”. The typical content of unit testing for the new organizing mode should have three aspects, including self-checking, cross-testing and independent-testing. For cross-testing, executing “pair-wise” mode, mainly tackles data testing, function testing and state testing, which function testing must be done by details and state testing must be considered for completeness. With the specializing of independent-testing, it should be taken as more rigid testing without arbitrariness. Consequently, strategy and measure are addressed for data testing focusing on boundary testing and function/state testing. And organizing method of procedure and key points of tackling unit testing are investigated for the new organizing mode. In order to assess the validity of our study and approach, a series of actual examples are demonstrated for GUI software. The result indicates that the execution of unit testing for the new organizing mode is effective and applicable.
基金Supported by National Natural Science Foundation of China(Grant Nos.U22B2068,52275520,52075078)National Key Research and Development Program of China(Grant No.2019YFA0709003).
文摘Ultrasonic testing(UT)is increasingly combined with machine learning(ML)techniques for intelligently identifying damage.Extracting signifcant features from UT data is essential for efcient defect characterization.Moreover,the hidden physics behind ML is unexplained,reducing the generalization capability and versatility of ML methods in UT.In this paper,a generally applicable ML framework based on the model interpretation strategy is proposed to improve the detection accuracy and computational efciency of UT.Firstly,multi-domain features are extracted from the UT signals with signal processing techniques to construct an initial feature space.Subsequently,a feature selection method based on model interpretable strategy(FS-MIS)is innovatively developed by integrating Shapley additive explanation(SHAP),flter method,embedded method and wrapper method.The most efective ML model and the optimal feature subset with better correlation to the target defects are determined self-adaptively.The proposed framework is validated by identifying and locating side-drilled holes(SDHs)with 0.5λcentral distance and different depths.An ultrasonic array probe is adopted to acquire FMC datasets from several aluminum alloy specimens containing two SDHs by experiments.The optimal feature subset selected by FS-MIS is set as the input of the chosen ML model to train and predict the times of arrival(ToAs)of the scattered waves emitted by adjacent SDHs.The experimental results demonstrate that the relative errors of the predicted ToAs are all below 3.67%with an average error of 0.25%,signifcantly improving the time resolution of UT signals.On this basis,the predicted ToAs are assigned to the corresponding original signals for decoupling overlapped pulse-echoes and reconstructing high-resolution FMC datasets.The imaging resolution is enhanced to 0.5λby implementing the total focusing method(TFM).The relative errors of hole depths and central distance are no more than 0.51%and 3.57%,respectively.Finally,the superior performance of the proposed FS-MIS is validated by comparing it with initial feature space and conventional dimensionality reduction techniques.
