With the rapid development of electronic information technology,the Internet of Things(IoT),Internet technology,and modern communication technology,people are demanding higher standards for the building environment.Es...With the rapid development of electronic information technology,the Internet of Things(IoT),Internet technology,and modern communication technology,people are demanding higher standards for the building environment.Especially in modern large-scale buildings with high levels of industrialization,lighting systems should also be optimized accordingly.This article explores the application path of intelligent lighting in thermal power plants for reference.展开更多
The continuous development of the power industry has had a positive impact on thermal power plants,helping them maintain a good production form.In the use of steam turbine equipment in thermal power plants,to prolong ...The continuous development of the power industry has had a positive impact on thermal power plants,helping them maintain a good production form.In the use of steam turbine equipment in thermal power plants,to prolong its lifespan and avoid safety hazards,it is necessary to pay attention to strengthening maintenance and construction organization,better implementing effective organizational work,and effectively applying steam turbine equipment to ensure the sustainable development of thermal power plants.This article discusses the concept of equipment maintenance from the perspective of steam turbine equipment in thermal power plants,analyzes the current situation of equipment maintenance,and proposes a specific construction organization to provide a reference for steam turbine equipment maintenance.展开更多
A review is conducted about the application of the evaporative cooling technology in thermal power plants.Different case studies are considered,namely,evaporative air conditioners,evaporative cooling in direct air-coo...A review is conducted about the application of the evaporative cooling technology in thermal power plants.Different case studies are considered,namely,evaporative air conditioners,evaporative cooling in direct air-cooled systems,gas turbine inlet cooling,wet cooling towers,and hybrid cooling towers with a crosswind effect.Some effort is provided to describe the advantages related to direct evaporative cooling when it is applied in thermal power plants and illustrate the research gaps,which have not been filled yet.In particular,typical case studies are intentionally used to compare the cooling performances when direct evaporative cooling is implemented in different types of cooling towers,including the natural draft wet cooling tower(NDWCT)and the pre-cooled natural draft dry cooling tower(NDDCT).It is shown that the NDWCT provides the best cooling performance in terms of power station cooling,followed by the pre-cooled NDDCT,and the NDDCT;moreover,the evaporative pre-cooling is able to enhance the cooling performance of NDDCT.Besides,on a yearly basis,better NDDCT cooling performances can be obtained by means of a spray-based pre-cooling approach with respect to wet media pre-cooling.Therefore,the use of nozzle spray is suggested for improvement in the performance of indirect/direct air-cooling systems with controlled water consumption.展开更多
Thermal power plant is one of the important thermodynamic devices, which is very common in all kinds of power generation systems. In this paper, we use a new concept, entransy loss, as well as exergy destruction, to a...Thermal power plant is one of the important thermodynamic devices, which is very common in all kinds of power generation systems. In this paper, we use a new concept, entransy loss, as well as exergy destruction, to analyze the single reheating Rankine cycle unit and the single stage steam extraction regenerative Rankine cycle unit in power plants. This is the first time that the concept of entransy loss is applied to the analysis of the power plant Rankine cycles with reheating and steam extraction regeneration. In order to obtain the maximum output power, the operating conditions under variant vapor mass flow rates are optimized numerically, as well as the combustion temperatures and the off-design flow rates of the flue gas. The relationship between the output power and the exergy destruction rate and that between the output power and the entransy loss rate are discussed. It is found that both the minimum exergy destruction rate and the maximum entransy loss rate lead to the maximum output power when the combustion temperature and heat capacity flow rate of the flue gas are prescribed. Unlike the minimum exergy destruction rate, the maximum entransy loss rate is related to the maximum output power when the highest temperature and heat capacity flow rate of the flue gas are not prescribed.展开更多
This paper analyzes 9 essentials in trial collecting SO2 emission charges based on the relevant legislative policies, summarizes and analyzes the actual practices of collecting and using SO2 emission charges in power ...This paper analyzes 9 essentials in trial collecting SO2 emission charges based on the relevant legislative policies, summarizes and analyzes the actual practices of collecting and using SO2 emission charges in power industry, and combining the status of power system reform, puts forward some recommendations about reasonably collecting and using SO2 emission charges and prompting power plants to take measures of desulfurization.展开更多
According to the national policy on enhancing environmental protection,the five major power generation companies are required to carry out flue gas desulphurization(FGD) franchising pilot project in thermal power plan...According to the national policy on enhancing environmental protection,the five major power generation companies are required to carry out flue gas desulphurization(FGD) franchising pilot project in thermal power plants.This paper introduces the development of this pilot project,including the foundation,purpose,objects,demands and procedures.It also discusses some main problems encountered during implementation,involving the understanding,legislation,financing,taxation,pricing and management of franchise.At the end,it puts forward some suggestions and countermeasures with regard to laws,regulations,taxation policy and electricity pricing policy.展开更多
As coal is the most important primary energy in China, SO2 , the main pollutant of coal-fired power plantsseriously pollutes the environment in the course of energy utilization and conversion. Flue gas desulphurizatio...As coal is the most important primary energy in China, SO2 , the main pollutant of coal-fired power plantsseriously pollutes the environment in the course of energy utilization and conversion. Flue gas desulphurization is inevitable in China, however, it is rather difficult to reach the stipulated standards without any compulsory administrative measures of the government. What are the exact difficulties and solutions for the desulphurization in power plants?展开更多
Through analyzing the proportion of SO2 emission from thermal power plants in the nationwide SO2 emis- sion in USA, Japan etc. developed countries, and the developmental course of thermal power installed capacity and ...Through analyzing the proportion of SO2 emission from thermal power plants in the nationwide SO2 emis- sion in USA, Japan etc. developed countries, and the developmental course of thermal power installed capacity and the FGD capacity in USA, the FGD capacity of thermal power plants in China is forecasted from two angles. One is to predict FGD capacity in accordance with the policy in force in China. The other is to predict FGD capacity based upon the emission right trading policy. As compared, it is held that FGD equipment should be mainly installed on the large size units burning high sulfur coal according to the emission right trading policy. Such a method of work not only can economize large amount of investments and operation costs, but also can realize the same environmental effect.展开更多
To study the physical and chemical properties of aluminosilicate microsphere catalyst by impregnation and calcination us was first obtained aluminosilicate microsphere catalyst U, Nd for petrochemical processes. The m...To study the physical and chemical properties of aluminosilicate microsphere catalyst by impregnation and calcination us was first obtained aluminosilicate microsphere catalyst U, Nd for petrochemical processes. The method of X-ray structure has been studied for the microsphere catalyst U, Nd.展开更多
To ensure that the daily production activities of thermal power plants can produce their due effect in the production and business activities,it is necessary to carry out efficient and orderly maintenance work on the ...To ensure that the daily production activities of thermal power plants can produce their due effect in the production and business activities,it is necessary to carry out efficient and orderly maintenance work on the professional equipment of steam engines.However,the maintenance work of steam engine professional equipment in thermal power plants usually uses high-cost expenditures.Therefore,how to take effective measures to reduce the cost of professional equipment maintenance in thermal power plants has become a problem that needs to be solved before such maintenance can proceed.Among them,through the application of economic maintenance equipment in thermal power plants,the actual production and operation costs can be effectively reduced.Based on this,the author will analyze the application of the model of economic maintenance of steam engine professional equipment in thermal power plants.展开更多
A trinomial tree model based on a real options approach was developed to evaluate the investment decisions on carbon capture,utilization,and storage(CCUS)retrofitted to the three main types of thermal power plants in ...A trinomial tree model based on a real options approach was developed to evaluate the investment decisions on carbon capture,utilization,and storage(CCUS)retrofitted to the three main types of thermal power plants in China under the same power generation and CO2 emissions levels.The plant types included pulverized coal(PC),integrated gasification combined cycle(IGCC),and natural gas combined cycle(NGCC)plants.We take into account a subsidy policy consistent with the 45Q tax credit of the U.S.,as well as uncertainty factors,such as carbon price,technological progress,CO_(2) geological storage paths,oil price,and electricity price.The results showed that the investment benefit of ordinary NGCC power plants is 93.04 million USD.This provides greater economic advantages than the other two plant types as their investment benefit is negative if the captured CO_(2) was used for enhanced water recovery(EWR),even if 45Q subsidies are provided.Compared with NGCC+CCUS power plants,PC+CCUS and IGCC+CCUS power plants have more advantages in terms of economic benefits and emission reduction.The 45Q subsidy policy reduced the critical carbon price,which determines the decision to invest or not,by 30.14 USDt^(-1) for the PC and IGCC power plants and by 15.24 USDt^(-1) for the NGCC power plants.Nevertheless,only when the subsidy reaches at least 71.84 USDt^(-1) and the period limit is canceled can all three types of power plants be motivated to invest in CCUS and used the capture CO_(2) for EWR.Overall,the government should focus on the application of CCUS in coal-fired power plants(in addition to developing gas power generation),especially when CO_(2) is used for enhanced oil recovery(EOR).The government could introduce fiscal policies,such as 45Q or stronger,to stimulate CCUS technology development in China.展开更多
With the rapid development of electricity production, SO 2 from coal fired power stations causes severe air pollution problem. In 1997, the SO 2 emitted from thermal power plants reached 7.0 Mt, accounting for abou...With the rapid development of electricity production, SO 2 from coal fired power stations causes severe air pollution problem. In 1997, the SO 2 emitted from thermal power plants reached 7.0 Mt, accounting for about 33% of the national emissions. At present and in the future, thermal power stations will still be the primary pollution sources. The Chinese government and power departments accord considerable importance to the SO 2 emissions from thermal power plants. New sets of environmentally friendly policies have been formulated. But, enforcement of laws and regulations needs to be further improved and broadened, especially those responding to market conditions. This paper focuses particular attention on the analysis of strategy, policies, and measures that have been or should be taken against SO 2 emissions from thermal power plants so as to achieve the environmental protection targets, on the basis of which the technical options for the future are given.展开更多
With the development of China’s economy,environmental pollution has become cumulatively serious.The primary source of environmental pollution is thermal power generation,which has attracted the attention of governmen...With the development of China’s economy,environmental pollution has become cumulatively serious.The primary source of environmental pollution is thermal power generation,which has attracted the attention of governments and academia in recent years.To effectively reduce environmental pollution,research should study how to constrain the undesirable output of thermal power plants,that is,to limit the total undesirable output of the plants to a certain fixed sum.However,few studies have suggested that these undesirable outputs should be fixed-sum outputs.Moreover,no previous research publication about thermal power plants has analyzed their environmental performance changes.To address these gaps,a novel Malmquist-DEA approach is proposed for evaluate the environmental performance of thermal power plants in this paper.This approach generalizes the equilibrium efficient frontier DEA model with fixed-sum undesirable outputs and incorporates the model into the Malmquist productivity index(MPI).The authors apply this approach to the analysis of provincial thermal power plant environmental performance in China and analyze such plants’trends based on panel data from2011 to 2014.The empirical research shows that the environmental performance of regional thermal power plants was positively affected by efficiency change and negatively affected by technical change.Finally,the authors provide policy suggestions based on our findings.展开更多
Introduction： Thermal power plants are very popular in China. However, there has not been proportional research attention paid to production risk in these plants and human impact on production due to their importance...Introduction： Thermal power plants are very popular in China. However, there has not been proportional research attention paid to production risk in these plants and human impact on production due to their importance in electricity generation. This study investigates production risks caused by human factors in thermal power plants and management methods to address identified human factors. Case description： Eighteen semi-structured interviews with front-line, middle and senior managers from four thermal power plants in China were carried out in this cross-sectional inductive study. Fault tree analysis and causal network analysis are used. Discussion and evaluation： We identify a range of production risks and human factors potentially influencing production in both negative and positive ways. We also recognize the most effective and practical relevant management methods to deal with identified human factors. Conclusion： By investigating production risk caused by human factors through the whole production process, this study emphasizes working attitude, safety consciousness, creativity and awareness of environmental protection as essential human factors potentially influencing production risks in thermal power plants. Through our analysis, by linking human factors to different types of production risk and supplying corresponding management methods to address these human factors, we offer practical human resource management approaches in the production management of thermal power plants.展开更多
This paper presents an architecture of Computer Integrated Production System in Thermal Power Plant(TPP-CIPS). This architecture is a successful model with a three-dimensional space based on hierarchial dimension,view...This paper presents an architecture of Computer Integrated Production System in Thermal Power Plant(TPP-CIPS). This architecture is a successful model with a three-dimensional space based on hierarchial dimension,view dimension and life period dimension. Hierarchial view includes Management Information System (MIS), SupervisoryInformation System (SIS) and process automation systems such as Distributed Control System (DCS). View dimensionincludes function view, resource view, organization view and information view. Life period view includes system analyses,system design, system implementation, operation maintenance and system optimization.[展开更多
A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is t...A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is to utilize system as a black box.The system studied is condenser system of one of MAPNA's power plants.At first,principal component analysis(PCA) approach was applied to reduce the dimensionality of the real acquired data set and to identify the essential and useful ones.Then,the fault sources were diagnosed by ICA technique.The results show that ICA approach is valid and effective for faults detection and diagnosis even in noisy states,and it can distinguish main factors of abnormality among many diverse parts of a power plant's condenser system.This selectivity problem is left unsolved in many plants,because the main factors often become unnoticed by fault expansion through other parts of the plants.展开更多
The bromine （Br） and iodine （I） in raw coal, bottom ash （BA） and fly ash （FA） from seven thermal power plants （TPP） digested with pyrohydrolysis were determined by using inductively coupled plasma mass spect...The bromine （Br） and iodine （I） in raw coal, bottom ash （BA） and fly ash （FA） from seven thermal power plants （TPP） digested with pyrohydrolysis were determined by using inductively coupled plasma mass spectrometry （ICP-MS）. The distribution behavior of Br and I during coal combustion were researched and the environmental effects of Br and I in BA, FA and gas phase were analyzed. The results show that both elements Br and I in combustion products from TPP are usually pre- sent in decreasing order of the distribution rate as gas phase, FA and BA. In FA and BA, the distribution rate of Br （8.11% and 1.68%, respectively） are generally lower than that of I （9.26% and 4.67%, respectively）; on the contrary, in gas phase, the former （90.2%） is higher than the latter （86.9%）. In addition, for gas phase, the percentage of Br： （2.0%-75%） in total Br is generally larger than that of I2 （1.0%-10%） in total I. The environmental effects for Br and I emitted into atmosphere from TPP may be larger than those remained and captured by both FA and BA.展开更多
With the increasing intelligence and integration,a great number of two-valued variables(generally stored in the form of 0 or 1)often exist in large-scale industrial processes.However,these variables cannot be effectiv...With the increasing intelligence and integration,a great number of two-valued variables(generally stored in the form of 0 or 1)often exist in large-scale industrial processes.However,these variables cannot be effectively handled by traditional monitoring methods such as linear discriminant analysis(LDA),principal component analysis(PCA)and partial least square(PLS)analysis.Recently,a mixed hidden naive Bayesian model(MHNBM)is developed for the first time to utilize both two-valued and continuous variables for abnormality monitoring.Although the MHNBM is effective,it still has some shortcomings that need to be improved.For the MHNBM,the variables with greater correlation to other variables have greater weights,which can not guarantee greater weights are assigned to the more discriminating variables.In addition,the conditional P(x j|x j′,y=k)probability must be computed based on historical data.When the training data is scarce,the conditional probability between continuous variables tends to be uniformly distributed,which affects the performance of MHNBM.Here a novel feature weighted mixed naive Bayes model(FWMNBM)is developed to overcome the above shortcomings.For the FWMNBM,the variables that are more correlated to the class have greater weights,which makes the more discriminating variables contribute more to the model.At the same time,FWMNBM does not have to calculate the conditional probability between variables,thus it is less restricted by the number of training data samples.Compared with the MHNBM,the FWMNBM has better performance,and its effectiveness is validated through numerical cases of a simulation example and a practical case of the Zhoushan thermal power plant(ZTPP),China.展开更多
Thermal power plants are generally constructed near to sea coast to meet their requirement of coolingwater. The warm water discharge from the thermal power plant is one of the major environmentalconcerns in view of th...Thermal power plants are generally constructed near to sea coast to meet their requirement of coolingwater. The warm water discharge from the thermal power plant is one of the major environmentalconcerns in view of the thermal pollution in the sea water. The temperature limit for the warm waterdischarge from the thermal power plant has to be monitored and controlled. Coastal Gujarat PowerLimited (CGPL) operates (24×7) at an “once-through system” based sea water circulation for powergeneration. The used sea water is then discharged into the sea through an outlet channel. As per environmental norms, the discharge water temperature needs to be maintained below the stipulated “delta”rise (+7 ℃) with respect to ambient sea surface temperature at the inlet. We demonstrate the applicability of thermal remote sensing data in understanding the seasonal and temporal variations of thetemperature difference between the discharge water and the ambient sea water. We used thermal banddata from Landsat-8 satellite imagery to map water surface temperature and create temperature profilesalong the intake and outflow channels (till the sea), to understand the variation of temperature andestimate the “DT” between intake point and various observation points along the outflow. This analysiswas carried out for all 11 months (except June) of the year 2018 to correlate temperature variations withseasonal changes. Tidal conditions during the time of data acquisition were also considered to accountfor the effect of tides on DT. The result shows that the average temperature rise between intake andoutflow are maintained at ~3 ℃ across all the months of 2018, with minor variations in the months ofJuly and August. Further, average temperature drop from outflow to cooling channel (before diaphragm)is seen to be ~2 ℃ across all the months with similar seasonal fluctuations.展开更多
文摘With the rapid development of electronic information technology,the Internet of Things(IoT),Internet technology,and modern communication technology,people are demanding higher standards for the building environment.Especially in modern large-scale buildings with high levels of industrialization,lighting systems should also be optimized accordingly.This article explores the application path of intelligent lighting in thermal power plants for reference.
文摘The continuous development of the power industry has had a positive impact on thermal power plants,helping them maintain a good production form.In the use of steam turbine equipment in thermal power plants,to prolong its lifespan and avoid safety hazards,it is necessary to pay attention to strengthening maintenance and construction organization,better implementing effective organizational work,and effectively applying steam turbine equipment to ensure the sustainable development of thermal power plants.This article discusses the concept of equipment maintenance from the perspective of steam turbine equipment in thermal power plants,analyzes the current situation of equipment maintenance,and proposes a specific construction organization to provide a reference for steam turbine equipment maintenance.
基金supported by the Shandong Natural Science Foundation(Grant No.ZR2022ME008)the Shandong Provincial Science and Technology SMEs Innovation Capacity Improvement Project(2022TSGC2018)+3 种基金the Shenzhen Science and Technology Program(KCXFZ20201221173409026)The financial supports from the“Young Scholars Program of Shandong University”(YSPSDU,No.2018WLJH73)the Open Project of State Key Laboratory of Clean Energy Utilization,Zhejiang University(Program Number ZJUCEU2020011)the Shandong Natural Science Foundation(Grant No.ZR2021ME118)are gratefully acknowledged。
文摘A review is conducted about the application of the evaporative cooling technology in thermal power plants.Different case studies are considered,namely,evaporative air conditioners,evaporative cooling in direct air-cooled systems,gas turbine inlet cooling,wet cooling towers,and hybrid cooling towers with a crosswind effect.Some effort is provided to describe the advantages related to direct evaporative cooling when it is applied in thermal power plants and illustrate the research gaps,which have not been filled yet.In particular,typical case studies are intentionally used to compare the cooling performances when direct evaporative cooling is implemented in different types of cooling towers,including the natural draft wet cooling tower(NDWCT)and the pre-cooled natural draft dry cooling tower(NDDCT).It is shown that the NDWCT provides the best cooling performance in terms of power station cooling,followed by the pre-cooled NDDCT,and the NDDCT;moreover,the evaporative pre-cooling is able to enhance the cooling performance of NDDCT.Besides,on a yearly basis,better NDDCT cooling performances can be obtained by means of a spray-based pre-cooling approach with respect to wet media pre-cooling.Therefore,the use of nozzle spray is suggested for improvement in the performance of indirect/direct air-cooling systems with controlled water consumption.
基金Project supported by the National Natural Science Foundation of China(Grant No.51376101)
文摘Thermal power plant is one of the important thermodynamic devices, which is very common in all kinds of power generation systems. In this paper, we use a new concept, entransy loss, as well as exergy destruction, to analyze the single reheating Rankine cycle unit and the single stage steam extraction regenerative Rankine cycle unit in power plants. This is the first time that the concept of entransy loss is applied to the analysis of the power plant Rankine cycles with reheating and steam extraction regeneration. In order to obtain the maximum output power, the operating conditions under variant vapor mass flow rates are optimized numerically, as well as the combustion temperatures and the off-design flow rates of the flue gas. The relationship between the output power and the exergy destruction rate and that between the output power and the entransy loss rate are discussed. It is found that both the minimum exergy destruction rate and the maximum entransy loss rate lead to the maximum output power when the combustion temperature and heat capacity flow rate of the flue gas are prescribed. Unlike the minimum exergy destruction rate, the maximum entransy loss rate is related to the maximum output power when the highest temperature and heat capacity flow rate of the flue gas are not prescribed.
文摘This paper analyzes 9 essentials in trial collecting SO2 emission charges based on the relevant legislative policies, summarizes and analyzes the actual practices of collecting and using SO2 emission charges in power industry, and combining the status of power system reform, puts forward some recommendations about reasonably collecting and using SO2 emission charges and prompting power plants to take measures of desulfurization.
文摘According to the national policy on enhancing environmental protection,the five major power generation companies are required to carry out flue gas desulphurization(FGD) franchising pilot project in thermal power plants.This paper introduces the development of this pilot project,including the foundation,purpose,objects,demands and procedures.It also discusses some main problems encountered during implementation,involving the understanding,legislation,financing,taxation,pricing and management of franchise.At the end,it puts forward some suggestions and countermeasures with regard to laws,regulations,taxation policy and electricity pricing policy.
文摘As coal is the most important primary energy in China, SO2 , the main pollutant of coal-fired power plantsseriously pollutes the environment in the course of energy utilization and conversion. Flue gas desulphurization is inevitable in China, however, it is rather difficult to reach the stipulated standards without any compulsory administrative measures of the government. What are the exact difficulties and solutions for the desulphurization in power plants?
文摘Through analyzing the proportion of SO2 emission from thermal power plants in the nationwide SO2 emis- sion in USA, Japan etc. developed countries, and the developmental course of thermal power installed capacity and the FGD capacity in USA, the FGD capacity of thermal power plants in China is forecasted from two angles. One is to predict FGD capacity in accordance with the policy in force in China. The other is to predict FGD capacity based upon the emission right trading policy. As compared, it is held that FGD equipment should be mainly installed on the large size units burning high sulfur coal according to the emission right trading policy. Such a method of work not only can economize large amount of investments and operation costs, but also can realize the same environmental effect.
文摘To study the physical and chemical properties of aluminosilicate microsphere catalyst by impregnation and calcination us was first obtained aluminosilicate microsphere catalyst U, Nd for petrochemical processes. The method of X-ray structure has been studied for the microsphere catalyst U, Nd.
文摘To ensure that the daily production activities of thermal power plants can produce their due effect in the production and business activities,it is necessary to carry out efficient and orderly maintenance work on the professional equipment of steam engines.However,the maintenance work of steam engine professional equipment in thermal power plants usually uses high-cost expenditures.Therefore,how to take effective measures to reduce the cost of professional equipment maintenance in thermal power plants has become a problem that needs to be solved before such maintenance can proceed.Among them,through the application of economic maintenance equipment in thermal power plants,the actual production and operation costs can be effectively reduced.Based on this,the author will analyze the application of the model of economic maintenance of steam engine professional equipment in thermal power plants.
基金the financial support of National Natural Science Foundation of China(71874193,71503249,71203008,71904014)the Asia-Pacific Network for Global Change Research(CBA2018-02MY-Fan)+2 种基金Huo Yingdong Education Foundation(171072)the Fundamental Research Funds for the Central Universities(Nos.2020YJSNY01,2020SKNY01)the Open Research Project of State Key Laboratory of Coal Resources and Safe Mining(China University of Mining and Technology,SKLCRSM19KFA14).
文摘A trinomial tree model based on a real options approach was developed to evaluate the investment decisions on carbon capture,utilization,and storage(CCUS)retrofitted to the three main types of thermal power plants in China under the same power generation and CO2 emissions levels.The plant types included pulverized coal(PC),integrated gasification combined cycle(IGCC),and natural gas combined cycle(NGCC)plants.We take into account a subsidy policy consistent with the 45Q tax credit of the U.S.,as well as uncertainty factors,such as carbon price,technological progress,CO_(2) geological storage paths,oil price,and electricity price.The results showed that the investment benefit of ordinary NGCC power plants is 93.04 million USD.This provides greater economic advantages than the other two plant types as their investment benefit is negative if the captured CO_(2) was used for enhanced water recovery(EWR),even if 45Q subsidies are provided.Compared with NGCC+CCUS power plants,PC+CCUS and IGCC+CCUS power plants have more advantages in terms of economic benefits and emission reduction.The 45Q subsidy policy reduced the critical carbon price,which determines the decision to invest or not,by 30.14 USDt^(-1) for the PC and IGCC power plants and by 15.24 USDt^(-1) for the NGCC power plants.Nevertheless,only when the subsidy reaches at least 71.84 USDt^(-1) and the period limit is canceled can all three types of power plants be motivated to invest in CCUS and used the capture CO_(2) for EWR.Overall,the government should focus on the application of CCUS in coal-fired power plants(in addition to developing gas power generation),especially when CO_(2) is used for enhanced oil recovery(EOR).The government could introduce fiscal policies,such as 45Q or stronger,to stimulate CCUS technology development in China.
文摘With the rapid development of electricity production, SO 2 from coal fired power stations causes severe air pollution problem. In 1997, the SO 2 emitted from thermal power plants reached 7.0 Mt, accounting for about 33% of the national emissions. At present and in the future, thermal power stations will still be the primary pollution sources. The Chinese government and power departments accord considerable importance to the SO 2 emissions from thermal power plants. New sets of environmentally friendly policies have been formulated. But, enforcement of laws and regulations needs to be further improved and broadened, especially those responding to market conditions. This paper focuses particular attention on the analysis of strategy, policies, and measures that have been or should be taken against SO 2 emissions from thermal power plants so as to achieve the environmental protection targets, on the basis of which the technical options for the future are given.
基金supported by the National Natural Science Foundation of China under Grant Nos.72071192,71671172the Anhui Provincial Quality Engineering Teaching and Research Project under Grant No.2020jyxm2279+2 种基金the Anhui University and Enterprise Cooperation Practice Education Base Project under Grant No.2019sjjd02Teaching and Research Project of USTC(2019xjyxm019,2020ycjg08)the Fundamental Research Funds for the Central Universities(WK2040000027)。
文摘With the development of China’s economy,environmental pollution has become cumulatively serious.The primary source of environmental pollution is thermal power generation,which has attracted the attention of governments and academia in recent years.To effectively reduce environmental pollution,research should study how to constrain the undesirable output of thermal power plants,that is,to limit the total undesirable output of the plants to a certain fixed sum.However,few studies have suggested that these undesirable outputs should be fixed-sum outputs.Moreover,no previous research publication about thermal power plants has analyzed their environmental performance changes.To address these gaps,a novel Malmquist-DEA approach is proposed for evaluate the environmental performance of thermal power plants in this paper.This approach generalizes the equilibrium efficient frontier DEA model with fixed-sum undesirable outputs and incorporates the model into the Malmquist productivity index(MPI).The authors apply this approach to the analysis of provincial thermal power plant environmental performance in China and analyze such plants’trends based on panel data from2011 to 2014.The empirical research shows that the environmental performance of regional thermal power plants was positively affected by efficiency change and negatively affected by technical change.Finally,the authors provide policy suggestions based on our findings.
基金This study was partially supported by the National Natural Science Foundation of China （No. 71472184）. The funding body facilitates the authors＇ data analysis and writing.
文摘Introduction： Thermal power plants are very popular in China. However, there has not been proportional research attention paid to production risk in these plants and human impact on production due to their importance in electricity generation. This study investigates production risks caused by human factors in thermal power plants and management methods to address identified human factors. Case description： Eighteen semi-structured interviews with front-line, middle and senior managers from four thermal power plants in China were carried out in this cross-sectional inductive study. Fault tree analysis and causal network analysis are used. Discussion and evaluation： We identify a range of production risks and human factors potentially influencing production in both negative and positive ways. We also recognize the most effective and practical relevant management methods to deal with identified human factors. Conclusion： By investigating production risk caused by human factors through the whole production process, this study emphasizes working attitude, safety consciousness, creativity and awareness of environmental protection as essential human factors potentially influencing production risks in thermal power plants. Through our analysis, by linking human factors to different types of production risk and supplying corresponding management methods to address these human factors, we offer practical human resource management approaches in the production management of thermal power plants.
文摘This paper presents an architecture of Computer Integrated Production System in Thermal Power Plant(TPP-CIPS). This architecture is a successful model with a three-dimensional space based on hierarchial dimension,view dimension and life period dimension. Hierarchial view includes Management Information System (MIS), SupervisoryInformation System (SIS) and process automation systems such as Distributed Control System (DCS). View dimensionincludes function view, resource view, organization view and information view. Life period view includes system analyses,system design, system implementation, operation maintenance and system optimization.[
基金Project(217/s/458)supported by Azarbaijan Shahid Madani University,Iran
文摘A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is to utilize system as a black box.The system studied is condenser system of one of MAPNA's power plants.At first,principal component analysis(PCA) approach was applied to reduce the dimensionality of the real acquired data set and to identify the essential and useful ones.Then,the fault sources were diagnosed by ICA technique.The results show that ICA approach is valid and effective for faults detection and diagnosis even in noisy states,and it can distinguish main factors of abnormality among many diverse parts of a power plant's condenser system.This selectivity problem is left unsolved in many plants,because the main factors often become unnoticed by fault expansion through other parts of the plants.
基金Supported by the National Natural Science Foundation of China （40133010, 40973080）
文摘The bromine （Br） and iodine （I） in raw coal, bottom ash （BA） and fly ash （FA） from seven thermal power plants （TPP） digested with pyrohydrolysis were determined by using inductively coupled plasma mass spectrometry （ICP-MS）. The distribution behavior of Br and I during coal combustion were researched and the environmental effects of Br and I in BA, FA and gas phase were analyzed. The results show that both elements Br and I in combustion products from TPP are usually pre- sent in decreasing order of the distribution rate as gas phase, FA and BA. In FA and BA, the distribution rate of Br （8.11% and 1.68%, respectively） are generally lower than that of I （9.26% and 4.67%, respectively）; on the contrary, in gas phase, the former （90.2%） is higher than the latter （86.9%）. In addition, for gas phase, the percentage of Br： （2.0%-75%） in total Br is generally larger than that of I2 （1.0%-10%） in total I. The environmental effects for Br and I emitted into atmosphere from TPP may be larger than those remained and captured by both FA and BA.
基金supported by the National Natural Science Foundation of China(62033008,61873143)。
文摘With the increasing intelligence and integration,a great number of two-valued variables(generally stored in the form of 0 or 1)often exist in large-scale industrial processes.However,these variables cannot be effectively handled by traditional monitoring methods such as linear discriminant analysis(LDA),principal component analysis(PCA)and partial least square(PLS)analysis.Recently,a mixed hidden naive Bayesian model(MHNBM)is developed for the first time to utilize both two-valued and continuous variables for abnormality monitoring.Although the MHNBM is effective,it still has some shortcomings that need to be improved.For the MHNBM,the variables with greater correlation to other variables have greater weights,which can not guarantee greater weights are assigned to the more discriminating variables.In addition,the conditional P(x j|x j′,y=k)probability must be computed based on historical data.When the training data is scarce,the conditional probability between continuous variables tends to be uniformly distributed,which affects the performance of MHNBM.Here a novel feature weighted mixed naive Bayes model(FWMNBM)is developed to overcome the above shortcomings.For the FWMNBM,the variables that are more correlated to the class have greater weights,which makes the more discriminating variables contribute more to the model.At the same time,FWMNBM does not have to calculate the conditional probability between variables,thus it is less restricted by the number of training data samples.Compared with the MHNBM,the FWMNBM has better performance,and its effectiveness is validated through numerical cases of a simulation example and a practical case of the Zhoushan thermal power plant(ZTPP),China.
文摘Thermal power plants are generally constructed near to sea coast to meet their requirement of coolingwater. The warm water discharge from the thermal power plant is one of the major environmentalconcerns in view of the thermal pollution in the sea water. The temperature limit for the warm waterdischarge from the thermal power plant has to be monitored and controlled. Coastal Gujarat PowerLimited (CGPL) operates (24×7) at an “once-through system” based sea water circulation for powergeneration. The used sea water is then discharged into the sea through an outlet channel. As per environmental norms, the discharge water temperature needs to be maintained below the stipulated “delta”rise (+7 ℃) with respect to ambient sea surface temperature at the inlet. We demonstrate the applicability of thermal remote sensing data in understanding the seasonal and temporal variations of thetemperature difference between the discharge water and the ambient sea water. We used thermal banddata from Landsat-8 satellite imagery to map water surface temperature and create temperature profilesalong the intake and outflow channels (till the sea), to understand the variation of temperature andestimate the “DT” between intake point and various observation points along the outflow. This analysiswas carried out for all 11 months (except June) of the year 2018 to correlate temperature variations withseasonal changes. Tidal conditions during the time of data acquisition were also considered to accountfor the effect of tides on DT. The result shows that the average temperature rise between intake andoutflow are maintained at ~3 ℃ across all the months of 2018, with minor variations in the months ofJuly and August. Further, average temperature drop from outflow to cooling channel (before diaphragm)is seen to be ~2 ℃ across all the months with similar seasonal fluctuations.
