Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of materials.Intermetallic compounds(IMCs)affect the joi...Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of materials.Intermetallic compounds(IMCs)affect the joint performance of Mg/Al.In this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)filler.The effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically investigated.The Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al joints.The blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating layer.The content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength decreased.The joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 MPa.By pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength increased.However,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the solder.Transmission electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC interface.Pre-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.展开更多
Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was...Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was applied to evaluate the effects of 4 variables by UAPE on cAMP yield.The results showed that the optimal cAMP yield(783.0μg/g)was derived at ratio of liquid to solid 5 mL/g,ratio of pectinase to raw material 1.5%,time 60 min and temperature 40℃.Moreover,the effect of cAMP on the anti-allergic function of action induced by immunoglobulin E(IgE)and its meschanism was investigated through establishing the sensitized cell model in rat basophilic leukemia(RBL-2 H3)cells using dinitrophenylated(DNP)-bovine serum albumin(BSA)-IgE.The results showed that cAMP interfered with sensitized cells,effectively inhibited the occurrence of basophil degranulation in dose dependence,and significantly reduced the activity ofβ-hexosamindase(β-hex),at the optimal concentration of 50μg/mL.The level of anti-inflammatory factor interleukin-10(IL-10)was promoted and the content of pro-inflammatory factor tumor necrosis factor-α(TNF-α)was suppressed by cAMP.In addition,influx of intracellular Ca^(2+) was repressed effectively.Our results demonstrate that jujube cAMP regulated the cytokine balance in the allergy pathway through blocking the influx of extracellular Ca^(2+),with the prevention of allergy symptoms.展开更多
Objective: To investigate suitable condition for extraction of the active components from Ajuga nipponensis(A. nipponensis). Methods: Orthogonal experimental design was used to determine the optimal extraction paramet...Objective: To investigate suitable condition for extraction of the active components from Ajuga nipponensis(A. nipponensis). Methods: Orthogonal experimental design was used to determine the optimal extraction parameters for ecdysterones and flavonoids. Finally, the hepatoprotective abilities of A. nipponensis extracts were evaluated by CCl_4-induced animal models. Results:Maximum yields of flavonoids(7.87±0.10) mg/g and ecdysterones(0.73±0.02) mg/g could be obtained when the extraction time was 50 min, the extraction temperature was 60 ℃, and the ratio of sample to 70%(v/v) ethanol was 1:20(w/w). The antioxidant property of A. nipponensis was correlated to the concentration of its extracts. At 5 mg/m L, A. nipponensisextract scavenged 84.8% of DPPH radical and had absorbance values of 2.43±0.04 reducing power. Upon CCl_4-induced liver injury, glutamic oxaloacetic transaminase and glutamic pyruvic transaminase decreased significantly after the mice were treated with A. nipponensis. Histological researches also explained that A. nipponensis reduced the extent of liver lesions induced by CCl_4. Conclusions: A. nipponensis exhibited potent antioxidant activity in chemical experimental models and hepatoprotective effect against CCl_4-induced liver damage.展开更多
A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTF...A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.展开更多
As a new resource food,Aronia melanocarpa is rich in flavonoids,which has a broad development prospect.In order to obtain a higher extraction rate of flavonoids,cellulase was used to extract total flavonoids from the ...As a new resource food,Aronia melanocarpa is rich in flavonoids,which has a broad development prospect.In order to obtain a higher extraction rate of flavonoids,cellulase was used to extract total flavonoids from the fruits of Aronia melanocarpa by ultrasonic-assisted enzymatic extraction(UAEE).The extraction process was optimized by single factor experiment and orthogonal experiment.The optimum conditions were as follows:enzymatic hydrolysis time 2.0 h,enzymatic hydrolysis temperature 37℃,enzyme content 0.5%(by weight of fruit pulp),ethanol concentration 90%,solid-liquid ratio 1:20,enzymatic hydrolysis temperature 37℃,enzymatic hydrolysis temperature 37℃,enzyme content 0.5%(by weight of fruit pulp),ethanol concentration 90%.Ultrasonic extraction time 1,0h,temperature 45℃.Under the above conditions,the extraction yield of flavonoids reached 1.455 mg/g.Compared with ultrasonic-assisted extraction(UAE),the extraction yield was significantly improved.Therefore,ultrasonic-assisted enzymatic hydrolysis is an effective method for the extraction of total flavonoids hom Aronia melanocarpa.展开更多
Ultrasonic-assisted chemical mechanical polishing(UA-CMP)can greatly improve the sapphire material removal and surface quality,but its polishing mechanism is still unclear.This paper proposed a novel model of material...Ultrasonic-assisted chemical mechanical polishing(UA-CMP)can greatly improve the sapphire material removal and surface quality,but its polishing mechanism is still unclear.This paper proposed a novel model of material removal rate(MRR)to explore the mechanism of sapphire UA-CMP.It contains two modes,namely two-body wear and abrasive-impact.Furthermore,the atomic force microscopy(AFM)in-situ study,computational fluid dynamics(CFD)simulation,and polishing experiments were conducted to verify the model and reveal the polishing mechanism.In the AFM in-situ studies,the tip scratched the reaction layer on the sapphire surface.The pit with a 0.22 nm depth is the evidence of two-body wear.The CFD simulation showed that abrasives could be driven by the ultrasonic vibration to impact the sapphire surface at high frequencies.The maximum total velocity and the air volume fraction(AVF)in the central area increased from 0.26 to 0.55 m/s and 20%to 49%,respectively,with the rising amplitudes of 1–3μm.However,the maximum total velocity rose slightly from 0.33 to 0.42 m/s,and the AVF was nearly unchanged under 40–80 r/min.It indicated that the ultrasonic energy has great effects on the abrasive-impact mode.The UA-CMP experimental results exhibited that there was 63.7%improvement in MRR when the polishing velocities rose from 40 to 80 r/min.The roughness of the polished sapphire surface was R_(a)=0.07 nm.It identified that the higher speed achieved greater MRR mainly through the two-body wear mode.This study is beneficial to further understanding the UA-CMP mechanism and promoting the development of UA-CMP technology.展开更多
Objectives:Optimization of ultrasonic-assisted freezing of Penaeus chinensis by response surface methodology was studied in order to(1)obtain frozen Penaeus chinensis of high quality and(2)provide practical guidance f...Objectives:Optimization of ultrasonic-assisted freezing of Penaeus chinensis by response surface methodology was studied in order to(1)obtain frozen Penaeus chinensis of high quality and(2)provide practical guidance for the application of ultrasonic-assisted freezing in Penaeus chinensis.Materials and Methods:Three independent and major variables were selected,including initial ultrasonic temperature(℃),ultrasonic power(W)and ultrasonic time(s on/2 s off).On the basis of one-factor experiments,17 groups of experiments were established by response surface methodology according to Box-Behnken design.Using multiple regression analysis the experimental data were fitted into a second-order polynomial equation,which was tested by proper statistical methods.Results:The optimal ultrasonic conditions were as follows:initial ultrasonic temperature 0℃,ultrasonic power 180 W,ultrasonic time 5 son/2 s off.Under the optimization conditions,the time of passing through maximum ice crystal generation zone was 105.500 s,which was very close to the predictive passage time of 101.541 s.Conclusions:Initial ultrasonic temperature,ultrasonic time and ultrasonic power played an important role in the process of ultrasonic-assisted freezing of Penaeus chinensis.Response surface methodology was used to optimize the three factors in ultrasonic-assisted freezing,which could greatly shorten the time of passing through the maximum ice crystal generation zone and maintain the tissue structure of Penaeus chinensis well.展开更多
A novel ultrasonic-assisted low-temperature soldering was developed to join AZ31B Mg alloy and 6061 Al alloy with a series of Sn–x Zn solders. The average maximum shear strength of the joints reaches up to 87.5 MPa a...A novel ultrasonic-assisted low-temperature soldering was developed to join AZ31B Mg alloy and 6061 Al alloy with a series of Sn–x Zn solders. The average maximum shear strength of the joints reaches up to 87.5 MPa at soldering temperature of 300 °C under ultrasonic assistance for only 5 s using Sn–20 Zn solder. The fracture path propagates completely in the soldering seam. The results indicate that the microjet generated by ultrasonic pressure in liquid solder could strike and splinter the Mg_2Sn intermetallic compounds into small pieces, which contributes to the enhancement of the joint strength. In addition, the primary Al(Zn) solid solution phase formed during cooling stage could also strengthen the joint due to the prevention of microcracks propagation.展开更多
An ultrasonic-assisted synthesis of bis-isoxazole derivatives was developed.Eight 3-(6-chloropyridin-3-yl)-5-{[(3-arylisoxazol-5-yl)methoxy]methyl}isoxazoles were synthesized by 1,3-dipolar cycloaddition reaction betw...An ultrasonic-assisted synthesis of bis-isoxazole derivatives was developed.Eight 3-(6-chloropyridin-3-yl)-5-{[(3-arylisoxazol-5-yl)methoxy]methyl}isoxazoles were synthesized by 1,3-dipolar cycloaddition reaction between substituted isoxazolyl alkyne compounds and 6-chloro-N-hydroxynicotinimidoyl chloride.The structures of the synthesized compounds were confirmed by HRMS,FTIR,^(1)H and^(13)C NMR spectroscopy.Wherein,the antifungal and antibacterial activities of target compounds were tested.The synthesized compounds 6a and 6h exhibited better antifungal activity in comparison with the standard drug itraconazole.The minimum inhibitory concentrations(MICs)of both compound 6a and compound 6h were both 4µg/mL against Candida albicans ATCC 10231.展开更多
Sub-micron Co-Al_(2)O_(3)composite powders were synthesized by ultrasonic-assisted electroless plating process at room temperature with a one-step activating method pretreatment.The effect of process parameters on pla...Sub-micron Co-Al_(2)O_(3)composite powders were synthesized by ultrasonic-assisted electroless plating process at room temperature with a one-step activating method pretreatment.The effect of process parameters on plating rate,Co content,and the uniformity of cobalt layer was analyzed by transmission electron microscopy(TEM).The results show that as the initial pH values of plating bath increase,the plating rate increases.The plating rate declines as the load increases when the load of powders is less than 12 g·L^(-1),but increases when the load is greater than 12 g·L^(-1).The relative Co content of the Co-Al_(2)O_(3) powder declines with the powder load increasing.展开更多
As a typical refractory material,the DD6 nickelbased single-crystal superalloy has important applications in the aviation industry.Ultrasonic-assisted drilling is an advanced machining method that significantly improv...As a typical refractory material,the DD6 nickelbased single-crystal superalloy has important applications in the aviation industry.Ultrasonic-assisted drilling is an advanced machining method that significantly improves machining of refractory materials.The drilling thrust force influences the hole surface quality,burr height,and bit wear.Therefore,it is necessary to predict the thrust force during ultrasonic-assisted drilling.However,there are few reports on the modeling of the thrust force in the ultrasonicassisted drilling of micro-holes.A thrust force prediction model for ultrasonic-assisted micro-drilling is proposed in this study.Based on the basic cutting principle,the dynamic cutting speed,dynamic cutting thickness,and acoustic softening effect caused by ultrasonic vibrations are factored into this model.Through model calibration,the specific friction force and specific normal force coefficients were determined.The model was verified through ultrasonic-assisted drilling experiments conducted at different feed rates,spindle speeds,frequencies,and amplitudes.The maximum and minimum errors of the average thrust force were 10.5%and 2.3%,respectively.This model accurately predicts the thrust force based on the parameters used for ultrasonic-assisted micro-hole drilling and can assist in the analysis and modeling of DD6 superalloy processing.展开更多
The present study aimed to completely remove estrogens, including oestrone（E1）, oestradiol（E2）, oes-triol（E3）, 17a-ethinylestradiol（EE2） and bisphenol-A（BPA）, from soil using Pseudomonas putida（P., putida）...The present study aimed to completely remove estrogens, including oestrone（E1）, oestradiol（E2）, oes-triol（E3）, 17a-ethinylestradiol（EE2） and bisphenol-A（BPA）, from soil using Pseudomonas putida（P., putida）. A centralcomposite design was developed to determine the optimal conditions of three variables（ultrasonication time, quantityof P. putida, and concentration of added rhamnolipid） for the removal of the estrogens, and the biodegradation ratesof the estrogens were investigated under the optimum conditions. Moreover, a quantitative structure-biedegradationrelationship（QSBR） was used to analyze the effect of the estrogenic physicochemical properties on the enhancementof the biological degradation. The optimal conditions were an ultrasonication time of 3 min, a P. putida quantity of 8mL, and a rhamnolipid concentration of 100 mg/L. These conditions resulted in removal of 100%, 94.86%, 94.90%,96.56% and 94.56% of El, E2, EE2, BPA and E3, respectively after 7 d. The degradations were more rapid and com-plete than those reported in previous studies, indicating the suitability of the adaptation of P. putida to estrogen de-gradation under conditions of ultrasonic-assistance and adding rhamnolipid, improvement was particularly apparentfrom the complete degradation of E3. Based on a Pearson correlation analysis, the estrogen molecule polar surfacearea（PSA） and surface tension were significantly related to the biodegradation effect. An analysis of the QSBR modelwith the estrogen biodegradation rates as a dependent variable and the PSA and surface tension as independent va-riables indicated that larger PSA caused decreased estrogen biodegradation, while the biodegradation progress wasdominated by the surface tension of the estrogens. The interaction of PSA and surface tension had an antagonistic ef-fect on the biodegradation of estrogens. Therefore, rhamnolipid/ultrasonication can significantly improve the biode-gradation rates of oestrogens in soil, while simultaneously adjusting other environmental conditions would influenceand control the biodegradation processes of estrogens.展开更多
In order to optimize the ultrasonic extraction technique for the total flavonoid of leaf yellows plus, the contents of 21 leaf yellows plus total flavonoid from four regions in Heilongjiang Province were comparatively...In order to optimize the ultrasonic extraction technique for the total flavonoid of leaf yellows plus, the contents of 21 leaf yellows plus total flavonoid from four regions in Heilongjiang Province were comparatively analyzed. The ultrasonic extraction technology was optimized by Box-Behnken response surface method, and the total flavonoid content of 21 kinds of Acanthopanax senticosus(Rupr. et Maxim.) Harms from different producing areas were analyzed by cluster analysis. The optimal process conditions were determined as ultrasonic time 30 min, solid-liquid ratio 1 : 12 and ultrasonic power 250 W, and the average yield of the total flavonoid was 1.453 mg·g^ (-1). By optimizing the ultrasonic-assisted extraction method, the total flavonoid content from different producing areas was compared in the experiment, which provided certain data support for the optimization of the extraction process in the future and laid a certain theoretical foundation for the quality analysis of Chinese medicinal materials.展开更多
A novel two-dimensional ultrasonic surface burnishing process(2D-USBP)is proposed.7075-T6 aluminum samples are processed by a custom-designed 2D-USBP setup.Parameter optimization of 2D-USBP is conducted to determine t...A novel two-dimensional ultrasonic surface burnishing process(2D-USBP)is proposed.7075-T6 aluminum samples are processed by a custom-designed 2D-USBP setup.Parameter optimization of 2D-USBP is conducted to determine the best processing strategy of 7075-T6 aluminum.A uniform design method is utilized to optimize the 2D-USBP process.U〔3(133)and 4(72)tables are established to conduct parameter optimization.Burnishing depth,spindle speed,and feed rate are taken as the control parameters.The surface roughness and Vickers hardness are taken as the evaluation indicators.It establishes the active control models for surface quality.Dry wear tests are conducted to compare the wear-resistance of the 2D-USBP treated sample and the original sample.Results show that the machining quality of 2D-USBP is best under 0.24 mm burnishing depth,5000 r/min spindle speed,and 25 mm/min feed rate.The surface roughness of the sample is reduced from 2517.758 to 50.878 nm,and the hardness of the sample surface is improved from 167 to 252 HV.Under the lower load,the wear mechanism of the 2D-USBP treated sample is mainly abrasive wear accompanied by delamination wear,while the wear mechanism of the original sample is mainly delamination wear.Under the higher load,the accumulation of frictional heat on the sample surface transforms the wear mechanisms of the original and the 2D-USBP treated samples into thermal wear.展开更多
Ultrasonic-assisted extraction(UAE)combined with medium pressure liquid chromatography(MPLC)was designed for carbazole separation from anthracene slag(AS).The effects of liquid/solid ratio,temperature,and extraction t...Ultrasonic-assisted extraction(UAE)combined with medium pressure liquid chromatography(MPLC)was designed for carbazole separation from anthracene slag(AS).The effects of liquid/solid ratio,temperature,and extraction times on carbazole separation were investigated.When using CC14 and ethyl acetate as extraction solvents and combining with MPLC,carbazole recovery and purity are 75.1%and 95.4%,respectively.The mechanism for carbazole separation were presumed by examining intermolecular interactions such as N-H…π,π-π,and C-Cl…πinteractions.These results demonstrate that UAE/MPLC has a considerable potential as a green and promising strategy for separating and purifying carbazole and other chemicals from AS.展开更多
[Objectives]This study aimed to optimize the ultrasonic-assisted extraction process of quercetin from Flos Sophorae Immaturus.[Methods]The natural product quercetin in Flos Sophorae Immaturus was extracted by ultrason...[Objectives]This study aimed to optimize the ultrasonic-assisted extraction process of quercetin from Flos Sophorae Immaturus.[Methods]The natural product quercetin in Flos Sophorae Immaturus was extracted by ultrasonic-assisted method,and the content of quercetin in the extract was determined by ultraviolet spectrophotometry.The effect of ethanol concentration,solid/liquid ratio,temperature,time and ultrasonic power on the yield of quercetin in Flos Sophorae Immaturus was investigated by using single-factor experiments.Based on the results of single-factor experiments,an orthogonal experiment was designed to optimize the extraction process.The experimental data obtained were subjected to range analysis,analysis of variance and SSR test using SPSS 20.0 software to obtain the optimal extraction process.The results concluded were verified.[Results]The optimal ultrasonic-assisted extraction process for quercetin in Flos Sophorae Immaturus was as follows:temperature of 85℃,time of 30 min,solid/liquid ratio of 1∶20 g/mL,ethanol concentration of 50%.Under the optimal extraction conditions,the yield of quercetin in Flos Sophorae Immaturus was the highest.[Conclusions]This study provides a theoretical basis for the application of quercetin in Flos Sophorae Immaturus.展开更多
With the rapid increasing demand of metal lithium and its compounds in science and technology,studies on lithium recovery though lithium ion extraction from salt lake brines are blooming bacause more than 60 percent
As a kind of biopolymer,hydrolysates of fish swim bladder,safer than those of land mammals,are widely used in food,cosmetics as well as pharmaceutical and biomedical fields for their biocompatibility,biodegradability,...As a kind of biopolymer,hydrolysates of fish swim bladder,safer than those of land mammals,are widely used in food,cosmetics as well as pharmaceutical and biomedical fields for their biocompatibility,biodegradability,and weak antigenicity.To enhance hydrolysate production,in this paper,the papain and alcalase hydrolysis processes of larimichthys polyactis swim bladder were optimized with orthogonal experiments.With 89.5%hydrolysate yield,the optimal processing conditions for alcalase were solid-liquid ratio of 1:30,enzyme concentration of 0.7%,and extraction time of 6 h.As for papain,under the optimal processing conditions:solid-liquid ratio of 1:20,enzyme concentration of 0.5%,and extraction time of 8 h,the hydrolysate yield was 65.1%.To obtain higher hydrolysate yields,the ultrasonic pretreatments were implemented before the optimal enzyme hydrolysis processes.With ultrasonic waves of 100 W for 50 min,the hydrolysate yields were increased 2.1%(alcalase)and 4.5%(papain),respectively.The Fourier Transform Infrared(FTIR)spectroscopic analysis revealed that the hydrolysates extracted by papain exist in triple-helical forms.The Ultra-Violet(UV)absorption spectra indicated that the aromatic amino acids in the hydrolysates had strong absorptions in the wavelength range of 240 nm–300 nm.The results of this research demonstrate that the alcalase hydrolysates have better solubility in water and the solution is more stable under ambient temperature.However,the hydrolysates extracted by papain have a gel property and are insoluble in weak acid at room temperature,which is more suitable for applications in feedstock of biomedical.展开更多
[Objectives]This study aimed to study and analyze the main components of the oil from seeds of 8 different pomegranate varieties.[Methods]The oil in sour and sweet pomegranate seeds was extracted by ultrasonic-assiste...[Objectives]This study aimed to study and analyze the main components of the oil from seeds of 8 different pomegranate varieties.[Methods]The oil in sour and sweet pomegranate seeds was extracted by ultrasonic-assisted method,and the composition of the soil after methyl esterification was identified by GC-MS.[Results]The oil yield of the four sweet pomegranate varieties and the four sour pomegranate varieties ranged from 9.43%-16.97%.A total of 6 compounds were identified in the methyl esterified pomegranate seed oil by GC-MS.[Conclusions]There were no significant differences in oil yield between sweet and sour pomegranate varieties(P>0.05).The content of methyl punicate in the four sweet pomegranate varieties was 52.18%-78.06%,and that in the four sour pomegranate varieties was 78.25%-84.55%.The content of methyl punicate in sour pomegranate was slightly higher than that in sweet pomegranate.展开更多
[Objectives] This study was conducted to optimize the extraction process of luteolin, a natural product of Ternate Grape Fern Herb, so as to provide a theoretical research basis for the chemical composition, pharmacol...[Objectives] This study was conducted to optimize the extraction process of luteolin, a natural product of Ternate Grape Fern Herb, so as to provide a theoretical research basis for the chemical composition, pharmacological research and preparation development of Ternate Grape Fern Herb. [Methods] The effects of four factors including ultrasonic extraction time, liquid-to-material ratio, ultrasonic extraction temperature and ethanol concentration on extraction yield of luteolin from Ternate Grape Fern Herb were investigated by the ultrasonic-assisted extraction technology, through a single-factor experiment and an orthogonal experiment based on the single-factor experiment, and the experimental data was subjected to variance analysis and SSR analysis of the significance of differences between groups by SPSS20.0 software to select the optimal extraction process conditions. [Results] The optimal extraction process conditions were as follows: ultrasonic extraction time 25 min, liquid-to-material ratio 25∶1 ml/g, ethanol volume fraction 60%, ultrasonic extraction temperature 85 ℃. [Conclusions] The results were verified, and it was determined that the ultrasonic-assisted extraction process established in this study is reasonable and reliable, and can be used for the extraction of luteolin.展开更多
基金financial support from the National Natural Science Foundation of China(grant numbers 52275385 and U2167216)the Sichuan Province Science and Technology Support Program(grant number 2022YFG0086)。
文摘Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of materials.Intermetallic compounds(IMCs)affect the joint performance of Mg/Al.In this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)filler.The effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically investigated.The Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al joints.The blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating layer.The content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength decreased.The joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 MPa.By pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength increased.However,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the solder.Transmission electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC interface.Pre-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.
基金supported by grant from the National Key Research and Development Program of China(2018YFC1602201)the Open Research Fund Program of Beijing Key Lab of Plant Resource Research and Development,Beijing Technology and Business University(PRRD-2021-YB8)+1 种基金the National Natural Science Fund(31601395)the Key Program for Shaanxi Science and Technology(2020NY-146)。
文摘Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was applied to evaluate the effects of 4 variables by UAPE on cAMP yield.The results showed that the optimal cAMP yield(783.0μg/g)was derived at ratio of liquid to solid 5 mL/g,ratio of pectinase to raw material 1.5%,time 60 min and temperature 40℃.Moreover,the effect of cAMP on the anti-allergic function of action induced by immunoglobulin E(IgE)and its meschanism was investigated through establishing the sensitized cell model in rat basophilic leukemia(RBL-2 H3)cells using dinitrophenylated(DNP)-bovine serum albumin(BSA)-IgE.The results showed that cAMP interfered with sensitized cells,effectively inhibited the occurrence of basophil degranulation in dose dependence,and significantly reduced the activity ofβ-hexosamindase(β-hex),at the optimal concentration of 50μg/mL.The level of anti-inflammatory factor interleukin-10(IL-10)was promoted and the content of pro-inflammatory factor tumor necrosis factor-α(TNF-α)was suppressed by cAMP.In addition,influx of intracellular Ca^(2+) was repressed effectively.Our results demonstrate that jujube cAMP regulated the cytokine balance in the allergy pathway through blocking the influx of extracellular Ca^(2+),with the prevention of allergy symptoms.
基金in part supported by the Forestry Bureau of the Republic of China(Taiwan)(NO.99-06-5-02)
文摘Objective: To investigate suitable condition for extraction of the active components from Ajuga nipponensis(A. nipponensis). Methods: Orthogonal experimental design was used to determine the optimal extraction parameters for ecdysterones and flavonoids. Finally, the hepatoprotective abilities of A. nipponensis extracts were evaluated by CCl_4-induced animal models. Results:Maximum yields of flavonoids(7.87±0.10) mg/g and ecdysterones(0.73±0.02) mg/g could be obtained when the extraction time was 50 min, the extraction temperature was 60 ℃, and the ratio of sample to 70%(v/v) ethanol was 1:20(w/w). The antioxidant property of A. nipponensis was correlated to the concentration of its extracts. At 5 mg/m L, A. nipponensisextract scavenged 84.8% of DPPH radical and had absorbance values of 2.43±0.04 reducing power. Upon CCl_4-induced liver injury, glutamic oxaloacetic transaminase and glutamic pyruvic transaminase decreased significantly after the mice were treated with A. nipponensis. Histological researches also explained that A. nipponensis reduced the extent of liver lesions induced by CCl_4. Conclusions: A. nipponensis exhibited potent antioxidant activity in chemical experimental models and hepatoprotective effect against CCl_4-induced liver damage.
基金This work was supported by the National Natural Science Foundation of China(No.51571033,11804022)the Science and Technology on Transient Impact Laboratory Foundation(No.6142606183208).
文摘A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.
文摘As a new resource food,Aronia melanocarpa is rich in flavonoids,which has a broad development prospect.In order to obtain a higher extraction rate of flavonoids,cellulase was used to extract total flavonoids from the fruits of Aronia melanocarpa by ultrasonic-assisted enzymatic extraction(UAEE).The extraction process was optimized by single factor experiment and orthogonal experiment.The optimum conditions were as follows:enzymatic hydrolysis time 2.0 h,enzymatic hydrolysis temperature 37℃,enzyme content 0.5%(by weight of fruit pulp),ethanol concentration 90%,solid-liquid ratio 1:20,enzymatic hydrolysis temperature 37℃,enzymatic hydrolysis temperature 37℃,enzyme content 0.5%(by weight of fruit pulp),ethanol concentration 90%.Ultrasonic extraction time 1,0h,temperature 45℃.Under the above conditions,the extraction yield of flavonoids reached 1.455 mg/g.Compared with ultrasonic-assisted extraction(UAE),the extraction yield was significantly improved.Therefore,ultrasonic-assisted enzymatic hydrolysis is an effective method for the extraction of total flavonoids hom Aronia melanocarpa.
基金This work was supported by the National Natural Science Foundation of China(Nos.51865030 and 52165025).
文摘Ultrasonic-assisted chemical mechanical polishing(UA-CMP)can greatly improve the sapphire material removal and surface quality,but its polishing mechanism is still unclear.This paper proposed a novel model of material removal rate(MRR)to explore the mechanism of sapphire UA-CMP.It contains two modes,namely two-body wear and abrasive-impact.Furthermore,the atomic force microscopy(AFM)in-situ study,computational fluid dynamics(CFD)simulation,and polishing experiments were conducted to verify the model and reveal the polishing mechanism.In the AFM in-situ studies,the tip scratched the reaction layer on the sapphire surface.The pit with a 0.22 nm depth is the evidence of two-body wear.The CFD simulation showed that abrasives could be driven by the ultrasonic vibration to impact the sapphire surface at high frequencies.The maximum total velocity and the air volume fraction(AVF)in the central area increased from 0.26 to 0.55 m/s and 20%to 49%,respectively,with the rising amplitudes of 1–3μm.However,the maximum total velocity rose slightly from 0.33 to 0.42 m/s,and the AVF was nearly unchanged under 40–80 r/min.It indicated that the ultrasonic energy has great effects on the abrasive-impact mode.The UA-CMP experimental results exhibited that there was 63.7%improvement in MRR when the polishing velocities rose from 40 to 80 r/min.The roughness of the polished sapphire surface was R_(a)=0.07 nm.It identified that the higher speed achieved greater MRR mainly through the two-body wear mode.This study is beneficial to further understanding the UA-CMP mechanism and promoting the development of UA-CMP technology.
基金the National Key Research and Development of China(No.2016YFD0400102)National Natural Science Foundation of China(No.31671918).
文摘Objectives:Optimization of ultrasonic-assisted freezing of Penaeus chinensis by response surface methodology was studied in order to(1)obtain frozen Penaeus chinensis of high quality and(2)provide practical guidance for the application of ultrasonic-assisted freezing in Penaeus chinensis.Materials and Methods:Three independent and major variables were selected,including initial ultrasonic temperature(℃),ultrasonic power(W)and ultrasonic time(s on/2 s off).On the basis of one-factor experiments,17 groups of experiments were established by response surface methodology according to Box-Behnken design.Using multiple regression analysis the experimental data were fitted into a second-order polynomial equation,which was tested by proper statistical methods.Results:The optimal ultrasonic conditions were as follows:initial ultrasonic temperature 0℃,ultrasonic power 180 W,ultrasonic time 5 son/2 s off.Under the optimization conditions,the time of passing through maximum ice crystal generation zone was 105.500 s,which was very close to the predictive passage time of 101.541 s.Conclusions:Initial ultrasonic temperature,ultrasonic time and ultrasonic power played an important role in the process of ultrasonic-assisted freezing of Penaeus chinensis.Response surface methodology was used to optimize the three factors in ultrasonic-assisted freezing,which could greatly shorten the time of passing through the maximum ice crystal generation zone and maintain the tissue structure of Penaeus chinensis well.
基金supported financially by the State Key Laboratory of Advanced Brazing Filler Metals & Technology (No. SKLABFMT-2016-02)the CAST Innovation Fund Key Project and the National Natural Science Foundation of China (Nos. 51775299 and 51520105007)
文摘A novel ultrasonic-assisted low-temperature soldering was developed to join AZ31B Mg alloy and 6061 Al alloy with a series of Sn–x Zn solders. The average maximum shear strength of the joints reaches up to 87.5 MPa at soldering temperature of 300 °C under ultrasonic assistance for only 5 s using Sn–20 Zn solder. The fracture path propagates completely in the soldering seam. The results indicate that the microjet generated by ultrasonic pressure in liquid solder could strike and splinter the Mg_2Sn intermetallic compounds into small pieces, which contributes to the enhancement of the joint strength. In addition, the primary Al(Zn) solid solution phase formed during cooling stage could also strengthen the joint due to the prevention of microcracks propagation.
文摘An ultrasonic-assisted synthesis of bis-isoxazole derivatives was developed.Eight 3-(6-chloropyridin-3-yl)-5-{[(3-arylisoxazol-5-yl)methoxy]methyl}isoxazoles were synthesized by 1,3-dipolar cycloaddition reaction between substituted isoxazolyl alkyne compounds and 6-chloro-N-hydroxynicotinimidoyl chloride.The structures of the synthesized compounds were confirmed by HRMS,FTIR,^(1)H and^(13)C NMR spectroscopy.Wherein,the antifungal and antibacterial activities of target compounds were tested.The synthesized compounds 6a and 6h exhibited better antifungal activity in comparison with the standard drug itraconazole.The minimum inhibitory concentrations(MICs)of both compound 6a and compound 6h were both 4µg/mL against Candida albicans ATCC 10231.
基金financially supported by the Natural Science Foundation of Zhejiang Province (No.LY12E2003)
文摘Sub-micron Co-Al_(2)O_(3)composite powders were synthesized by ultrasonic-assisted electroless plating process at room temperature with a one-step activating method pretreatment.The effect of process parameters on plating rate,Co content,and the uniformity of cobalt layer was analyzed by transmission electron microscopy(TEM).The results show that as the initial pH values of plating bath increase,the plating rate increases.The plating rate declines as the load increases when the load of powders is less than 12 g·L^(-1),but increases when the load is greater than 12 g·L^(-1).The relative Co content of the Co-Al_(2)O_(3) powder declines with the powder load increasing.
基金This work was sponsored by the National Natural Science Foundation of China(Grant No.51775443)the National Science and Technology Major Project(Grant No.2017-VII-0015-O111)China Postdoctoral Science Foundation(Grant No.2020M683569).
文摘As a typical refractory material,the DD6 nickelbased single-crystal superalloy has important applications in the aviation industry.Ultrasonic-assisted drilling is an advanced machining method that significantly improves machining of refractory materials.The drilling thrust force influences the hole surface quality,burr height,and bit wear.Therefore,it is necessary to predict the thrust force during ultrasonic-assisted drilling.However,there are few reports on the modeling of the thrust force in the ultrasonicassisted drilling of micro-holes.A thrust force prediction model for ultrasonic-assisted micro-drilling is proposed in this study.Based on the basic cutting principle,the dynamic cutting speed,dynamic cutting thickness,and acoustic softening effect caused by ultrasonic vibrations are factored into this model.Through model calibration,the specific friction force and specific normal force coefficients were determined.The model was verified through ultrasonic-assisted drilling experiments conducted at different feed rates,spindle speeds,frequencies,and amplitudes.The maximum and minimum errors of the average thrust force were 10.5%and 2.3%,respectively.This model accurately predicts the thrust force based on the parameters used for ultrasonic-assisted micro-hole drilling and can assist in the analysis and modeling of DD6 superalloy processing.
文摘The present study aimed to completely remove estrogens, including oestrone（E1）, oestradiol（E2）, oes-triol（E3）, 17a-ethinylestradiol（EE2） and bisphenol-A（BPA）, from soil using Pseudomonas putida（P., putida）. A centralcomposite design was developed to determine the optimal conditions of three variables（ultrasonication time, quantityof P. putida, and concentration of added rhamnolipid） for the removal of the estrogens, and the biodegradation ratesof the estrogens were investigated under the optimum conditions. Moreover, a quantitative structure-biedegradationrelationship（QSBR） was used to analyze the effect of the estrogenic physicochemical properties on the enhancementof the biological degradation. The optimal conditions were an ultrasonication time of 3 min, a P. putida quantity of 8mL, and a rhamnolipid concentration of 100 mg/L. These conditions resulted in removal of 100%, 94.86%, 94.90%,96.56% and 94.56% of El, E2, EE2, BPA and E3, respectively after 7 d. The degradations were more rapid and com-plete than those reported in previous studies, indicating the suitability of the adaptation of P. putida to estrogen de-gradation under conditions of ultrasonic-assistance and adding rhamnolipid, improvement was particularly apparentfrom the complete degradation of E3. Based on a Pearson correlation analysis, the estrogen molecule polar surfacearea（PSA） and surface tension were significantly related to the biodegradation effect. An analysis of the QSBR modelwith the estrogen biodegradation rates as a dependent variable and the PSA and surface tension as independent va-riables indicated that larger PSA caused decreased estrogen biodegradation, while the biodegradation progress wasdominated by the surface tension of the estrogens. The interaction of PSA and surface tension had an antagonistic ef-fect on the biodegradation of estrogens. Therefore, rhamnolipid/ultrasonication can significantly improve the biode-gradation rates of oestrogens in soil, while simultaneously adjusting other environmental conditions would influenceand control the biodegradation processes of estrogens.
基金Supported by the Breeding Techniques for New Varieties of Acanthopanax senticosus(CZKYF2022-1-B023)。
文摘In order to optimize the ultrasonic extraction technique for the total flavonoid of leaf yellows plus, the contents of 21 leaf yellows plus total flavonoid from four regions in Heilongjiang Province were comparatively analyzed. The ultrasonic extraction technology was optimized by Box-Behnken response surface method, and the total flavonoid content of 21 kinds of Acanthopanax senticosus(Rupr. et Maxim.) Harms from different producing areas were analyzed by cluster analysis. The optimal process conditions were determined as ultrasonic time 30 min, solid-liquid ratio 1 : 12 and ultrasonic power 250 W, and the average yield of the total flavonoid was 1.453 mg·g^ (-1). By optimizing the ultrasonic-assisted extraction method, the total flavonoid content from different producing areas was compared in the experiment, which provided certain data support for the optimization of the extraction process in the future and laid a certain theoretical foundation for the quality analysis of Chinese medicinal materials.
基金Supportedby National Natural Science Foundation of China(Grant Nos.51675483,51705028)Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.RF-A2019008)Foundations(Grant Nos.61409230606,EM2015042003).
文摘A novel two-dimensional ultrasonic surface burnishing process(2D-USBP)is proposed.7075-T6 aluminum samples are processed by a custom-designed 2D-USBP setup.Parameter optimization of 2D-USBP is conducted to determine the best processing strategy of 7075-T6 aluminum.A uniform design method is utilized to optimize the 2D-USBP process.U〔3(133)and 4(72)tables are established to conduct parameter optimization.Burnishing depth,spindle speed,and feed rate are taken as the control parameters.The surface roughness and Vickers hardness are taken as the evaluation indicators.It establishes the active control models for surface quality.Dry wear tests are conducted to compare the wear-resistance of the 2D-USBP treated sample and the original sample.Results show that the machining quality of 2D-USBP is best under 0.24 mm burnishing depth,5000 r/min spindle speed,and 25 mm/min feed rate.The surface roughness of the sample is reduced from 2517.758 to 50.878 nm,and the hardness of the sample surface is improved from 167 to 252 HV.Under the lower load,the wear mechanism of the 2D-USBP treated sample is mainly abrasive wear accompanied by delamination wear,while the wear mechanism of the original sample is mainly delamination wear.Under the higher load,the accumulation of frictional heat on the sample surface transforms the wear mechanisms of the original and the 2D-USBP treated samples into thermal wear.
基金Supported by the Key Project of Joint Fund for the research on Coal-Based Low Carbon Technology from National Natural Science Foundation of China and the Government of Shanxi(U1610223)Coal-based Key Scientific and Technological Projects of Shanxi Province(MJH2014-15)the National Key Research and Development Program of China(2018YFB0604602).
文摘Ultrasonic-assisted extraction(UAE)combined with medium pressure liquid chromatography(MPLC)was designed for carbazole separation from anthracene slag(AS).The effects of liquid/solid ratio,temperature,and extraction times on carbazole separation were investigated.When using CC14 and ethyl acetate as extraction solvents and combining with MPLC,carbazole recovery and purity are 75.1%and 95.4%,respectively.The mechanism for carbazole separation were presumed by examining intermolecular interactions such as N-H…π,π-π,and C-Cl…πinteractions.These results demonstrate that UAE/MPLC has a considerable potential as a green and promising strategy for separating and purifying carbazole and other chemicals from AS.
基金Innovation and Entrepreneurship Training Program for Undergraduates of Xiamen Medical College(201812631035,201912631026).
文摘[Objectives]This study aimed to optimize the ultrasonic-assisted extraction process of quercetin from Flos Sophorae Immaturus.[Methods]The natural product quercetin in Flos Sophorae Immaturus was extracted by ultrasonic-assisted method,and the content of quercetin in the extract was determined by ultraviolet spectrophotometry.The effect of ethanol concentration,solid/liquid ratio,temperature,time and ultrasonic power on the yield of quercetin in Flos Sophorae Immaturus was investigated by using single-factor experiments.Based on the results of single-factor experiments,an orthogonal experiment was designed to optimize the extraction process.The experimental data obtained were subjected to range analysis,analysis of variance and SSR test using SPSS 20.0 software to obtain the optimal extraction process.The results concluded were verified.[Results]The optimal ultrasonic-assisted extraction process for quercetin in Flos Sophorae Immaturus was as follows:temperature of 85℃,time of 30 min,solid/liquid ratio of 1∶20 g/mL,ethanol concentration of 50%.Under the optimal extraction conditions,the yield of quercetin in Flos Sophorae Immaturus was the highest.[Conclusions]This study provides a theoretical basis for the application of quercetin in Flos Sophorae Immaturus.
基金Financial support from the State Surface Project of National Natural Science of China (21276194)the Key Pillar Program of Tianjin Municipal Science and Technology (11ZCKGX02800)the Specialized Research Fund for the Doctoral Program of Chinese Higher Education (20101208110003)
文摘With the rapid increasing demand of metal lithium and its compounds in science and technology,studies on lithium recovery though lithium ion extraction from salt lake brines are blooming bacause more than 60 percent
基金This research was funded by the Fundamental Research Funds for the Central Universities,Grant No.2572018AB10the Fundamental Research Funds for the Central Universities,Grant No.2572019BB07.
文摘As a kind of biopolymer,hydrolysates of fish swim bladder,safer than those of land mammals,are widely used in food,cosmetics as well as pharmaceutical and biomedical fields for their biocompatibility,biodegradability,and weak antigenicity.To enhance hydrolysate production,in this paper,the papain and alcalase hydrolysis processes of larimichthys polyactis swim bladder were optimized with orthogonal experiments.With 89.5%hydrolysate yield,the optimal processing conditions for alcalase were solid-liquid ratio of 1:30,enzyme concentration of 0.7%,and extraction time of 6 h.As for papain,under the optimal processing conditions:solid-liquid ratio of 1:20,enzyme concentration of 0.5%,and extraction time of 8 h,the hydrolysate yield was 65.1%.To obtain higher hydrolysate yields,the ultrasonic pretreatments were implemented before the optimal enzyme hydrolysis processes.With ultrasonic waves of 100 W for 50 min,the hydrolysate yields were increased 2.1%(alcalase)and 4.5%(papain),respectively.The Fourier Transform Infrared(FTIR)spectroscopic analysis revealed that the hydrolysates extracted by papain exist in triple-helical forms.The Ultra-Violet(UV)absorption spectra indicated that the aromatic amino acids in the hydrolysates had strong absorptions in the wavelength range of 240 nm–300 nm.The results of this research demonstrate that the alcalase hydrolysates have better solubility in water and the solution is more stable under ambient temperature.However,the hydrolysates extracted by papain have a gel property and are insoluble in weak acid at room temperature,which is more suitable for applications in feedstock of biomedical.
基金the Program of Study Abroad for Young Scholar Sponsored by China Scholarship Council(CSC201800850005)Central University Basic Research Funds Project(No.2019NYB31).
文摘[Objectives]This study aimed to study and analyze the main components of the oil from seeds of 8 different pomegranate varieties.[Methods]The oil in sour and sweet pomegranate seeds was extracted by ultrasonic-assisted method,and the composition of the soil after methyl esterification was identified by GC-MS.[Results]The oil yield of the four sweet pomegranate varieties and the four sour pomegranate varieties ranged from 9.43%-16.97%.A total of 6 compounds were identified in the methyl esterified pomegranate seed oil by GC-MS.[Conclusions]There were no significant differences in oil yield between sweet and sour pomegranate varieties(P>0.05).The content of methyl punicate in the four sweet pomegranate varieties was 52.18%-78.06%,and that in the four sour pomegranate varieties was 78.25%-84.55%.The content of methyl punicate in sour pomegranate was slightly higher than that in sweet pomegranate.
基金Supported by 2019 Undergraduate Innovation and Enterpreneurship Training Program of Fujian Province(201912631026)Undergraduate Innovation and Enterpreneurship Training Program of Xiamen Medical College(201912631057)。
文摘[Objectives] This study was conducted to optimize the extraction process of luteolin, a natural product of Ternate Grape Fern Herb, so as to provide a theoretical research basis for the chemical composition, pharmacological research and preparation development of Ternate Grape Fern Herb. [Methods] The effects of four factors including ultrasonic extraction time, liquid-to-material ratio, ultrasonic extraction temperature and ethanol concentration on extraction yield of luteolin from Ternate Grape Fern Herb were investigated by the ultrasonic-assisted extraction technology, through a single-factor experiment and an orthogonal experiment based on the single-factor experiment, and the experimental data was subjected to variance analysis and SSR analysis of the significance of differences between groups by SPSS20.0 software to select the optimal extraction process conditions. [Results] The optimal extraction process conditions were as follows: ultrasonic extraction time 25 min, liquid-to-material ratio 25∶1 ml/g, ethanol volume fraction 60%, ultrasonic extraction temperature 85 ℃. [Conclusions] The results were verified, and it was determined that the ultrasonic-assisted extraction process established in this study is reasonable and reliable, and can be used for the extraction of luteolin.
