The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results i...The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results indicate that the peak stress, peak strain, secant modulus of the peak point and original point increase with the strength grade of RAC enhanced. On the contrary, the residual stress of RAC decreases with the strength grade enhancing, and the failure of RAC is often broken at the interface between the recycled aggregate and the mortar matrix. Finally, the constitutive model of stress-strain model of RAC has been constituted, and the results from the constitutive model of stress-strain meet the experiment results very well.展开更多
The electrical conductivity, compression sensibility, workability and cost are factors that affect the application of conductive smart materials in civil structures. Consequently, the resistance and compression sensib...The electrical conductivity, compression sensibility, workability and cost are factors that affect the application of conductive smart materials in civil structures. Consequently, the resistance and compression sensibility of magnetic-concentrated fly ash （MCFA） mortar were investigated using two electrode method, and the difference of compression sensibility between MCFA mortar and carbon fiber reinforced cement （CFRC） under uniaxial loading was studied. Factors affecting the compression sensibility of MCFA mortar, such as MCFA content, loading rate and stress cycles, were analyzed. Results show that fly ash with high content of Fe3O4 can be used to prepare conductive mortar since Fe3O4 is a kind of nonstoichiometric oxide and usually acts as semiconductor. MCFA mortar exhibits the same electrical conductivity to that of CFRC when the content of MCFA is more than 40% by weight of sample. The compression sensibility of mortar is improved with the increase of MCFA content and loading rate. The compression sensibility of MCFA mortar is reversible with the circling of loading. Results show that the application of MCFA in concrete not only provides excellent performances of electrical-functionality and workability, but also reduces the cost of conductive concrete.展开更多
For understanding the damage and failure rule of rock under different uniaxial compressive loads and dynamic loads, tests on red sandstone were carried out on Instron 1342 electro-servo controlled testing system with ...For understanding the damage and failure rule of rock under different uniaxial compressive loads and dynamic loads, tests on red sandstone were carried out on Instron 1342 electro-servo controlled testing system with different uniaxial compressive loads of 0, 2, 4 and 6 MPa. It is found that peak stress, peak strain, elastic modulus and total strain energy decrease with the increase of static compressive stress. Based on the test results, the mechanism on damage and failure of rock was analyzed, and according to the equivalent strain hypothesis, a new constitutive model of elastic-plastic damage was established, and then the calculated results with the established model were compared with test results to show a good agreement. Furthermore the rule of releasing ratio of damage strain energy was discussed.展开更多
Design and construction of engineering structures in geomaterials with block-in-matrix texture(referred as bimrock) such as conglomerates,breccias and agglomerates are challenging tasks for engineers.When dealing with...Design and construction of engineering structures in geomaterials with block-in-matrix texture(referred as bimrock) such as conglomerates,breccias and agglomerates are challenging tasks for engineers.When dealing with these materials in important structures such as open pits with high walls and pillars of deep underground mines,understanding the complete stress-strain behavior,including post-peak region,is a formidable yet crucial engineering practice.To study the post-peak behavior of bimrocks,artificial specimens were fabricated with a mixture of rock blocks and a cementing agent.All the experiments were conducted under uniaxial compression using a servo-control testing machine.The results show that the specimens with the highest block proportion(around 90% by mass) showed a small decrease in stress with strain increment in the post-peak region.The specimens with lower block proportions were characterized by an approximately steep fall in stress and following to residual stress.Based on the study,it is inferred that all the artificial specimens undergo post-failure deformation and the type of post behavior depends on rock block proportions.展开更多
基金Supported by the Fund of Hunan Provincial Construction Department(No.06-468-8)
文摘The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results indicate that the peak stress, peak strain, secant modulus of the peak point and original point increase with the strength grade of RAC enhanced. On the contrary, the residual stress of RAC decreases with the strength grade enhancing, and the failure of RAC is often broken at the interface between the recycled aggregate and the mortar matrix. Finally, the constitutive model of stress-strain model of RAC has been constituted, and the results from the constitutive model of stress-strain meet the experiment results very well.
基金the National Natural Science Foundation of China(No.51002193)
文摘The electrical conductivity, compression sensibility, workability and cost are factors that affect the application of conductive smart materials in civil structures. Consequently, the resistance and compression sensibility of magnetic-concentrated fly ash （MCFA） mortar were investigated using two electrode method, and the difference of compression sensibility between MCFA mortar and carbon fiber reinforced cement （CFRC） under uniaxial loading was studied. Factors affecting the compression sensibility of MCFA mortar, such as MCFA content, loading rate and stress cycles, were analyzed. Results show that fly ash with high content of Fe3O4 can be used to prepare conductive mortar since Fe3O4 is a kind of nonstoichiometric oxide and usually acts as semiconductor. MCFA mortar exhibits the same electrical conductivity to that of CFRC when the content of MCFA is more than 40% by weight of sample. The compression sensibility of mortar is improved with the increase of MCFA content and loading rate. The compression sensibility of MCFA mortar is reversible with the circling of loading. Results show that the application of MCFA in concrete not only provides excellent performances of electrical-functionality and workability, but also reduces the cost of conductive concrete.
文摘For understanding the damage and failure rule of rock under different uniaxial compressive loads and dynamic loads, tests on red sandstone were carried out on Instron 1342 electro-servo controlled testing system with different uniaxial compressive loads of 0, 2, 4 and 6 MPa. It is found that peak stress, peak strain, elastic modulus and total strain energy decrease with the increase of static compressive stress. Based on the test results, the mechanism on damage and failure of rock was analyzed, and according to the equivalent strain hypothesis, a new constitutive model of elastic-plastic damage was established, and then the calculated results with the established model were compared with test results to show a good agreement. Furthermore the rule of releasing ratio of damage strain energy was discussed.
文摘Design and construction of engineering structures in geomaterials with block-in-matrix texture(referred as bimrock) such as conglomerates,breccias and agglomerates are challenging tasks for engineers.When dealing with these materials in important structures such as open pits with high walls and pillars of deep underground mines,understanding the complete stress-strain behavior,including post-peak region,is a formidable yet crucial engineering practice.To study the post-peak behavior of bimrocks,artificial specimens were fabricated with a mixture of rock blocks and a cementing agent.All the experiments were conducted under uniaxial compression using a servo-control testing machine.The results show that the specimens with the highest block proportion(around 90% by mass) showed a small decrease in stress with strain increment in the post-peak region.The specimens with lower block proportions were characterized by an approximately steep fall in stress and following to residual stress.Based on the study,it is inferred that all the artificial specimens undergo post-failure deformation and the type of post behavior depends on rock block proportions.
