The development process as well as the core theory of distributed interactive simulation and high level architecture are discussed, and combined with graphics features, a system of real time distributed visual simula...The development process as well as the core theory of distributed interactive simulation and high level architecture are discussed, and combined with graphics features, a system of real time distributed visual simulation is established. Based on computer network, simulation platform is built by installing related software and modeling object, and the interactive functions are extended by programming. A set of solutions for building a distributed visual simulation system that include both hardware and software are put forward, and a practical instance is also provided. The whole building process can be summarized into two steps that are scheme consideration and system realization.展开更多
To simulate the process of cold roll-forming process, a new method isadopted. The theoretical foundation of this method is an elastic-plastic large deformation splinefinite strip method based on object-oriented progra...To simulate the process of cold roll-forming process, a new method isadopted. The theoretical foundation of this method is an elastic-plastic large deformation splinefinite strip method based on object-oriented programming. Combined with the computer graphicstechnology, the visual simulation of cold roll-forming is completed and the system is established.By analyzing common channel steel, the process is shown and explained including theory method, modeland result display. So the simulation system is already a kind of mature and effective tool toanalyze the process of cold roll forming.展开更多
Any tidal defense engineering involves the collection and analysis of massive information about engineering structures and their surrounding environment. Traditional method, which is carried out mainly by means of two...Any tidal defense engineering involves the collection and analysis of massive information about engineering structures and their surrounding environment. Traditional method, which is carried out mainly by means of twodimensional drawings and textures, is not efficient and intuitive enough to analyze the whole project and reflect its spatial relationship. Three-dimensional visual simulation provides an advanced technical means of solving this problem. In this paper, triangular irregular network (TIN) model simplified by non-uniform rational B-splines (NURBS) technique was used to establish the digital terrain model (DTM) of a super large region. Simulation of dynamic water surface was realized by combining noise function with sine wave superposition method. Models of different objects were established with different modeling techniques according to their characteristics. Application of texture mapping technology remarkably improved the authenticity of the models. Taking the tidal defense engineering in the new coastal region of Tianjin as a case study, three-dimensional visual simulation and dynamic roaming of the study area were realized, providing visual analysis and visible demonstration method for the management and emergency decision-making associated with construction.展开更多
The methodology of visual simulation for a tunnel engineering construction schedule is presented. Visualization of simulation model, calculation and result of construction schedule simulation is realized, and the cons...The methodology of visual simulation for a tunnel engineering construction schedule is presented. Visualization of simulation model, calculation and result of construction schedule simulation is realized, and the construction simulation and the resource optimization of tunnel engineering are made. A risk analysis and a decision-making method of tunnel engineering construction schedule based on visual simulation are presented. Furthermore, using S curve theory and schedule management method, the real-time management and control method of tunnel engineering construction based on visual simulation is presented. The application to the tunnel engineering construction schedule analysis and management shows the feasibility and effectiveness of the method presented in this paper.展开更多
Applying the visual simulation technology to highway engineering, an expressway visual simulation system for the analysis of landscape design proposals is built during the construction of Xiaoxiang expressway. Its fun...Applying the visual simulation technology to highway engineering, an expressway visual simulation system for the analysis of landscape design proposals is built during the construction of Xiaoxiang expressway. Its functional requirements and overall architecture are presented. The 3D model of expressway is created with AutoCAD DWG files as source data and the dynamic design method of expressway landscape elements is introduced. A data analysis interface dedicated to the landscape evaluation is developed. The system offers an effective tool to facilitate the analysis and evaluation of the road landscape proposals.展开更多
Fundamental conception and technological features of Digital Campus as well as the general framework of its visualization subsystem are introduced. A practical case of visual campus simulation system of Huazhong Unive...Fundamental conception and technological features of Digital Campus as well as the general framework of its visualization subsystem are introduced. A practical case of visual campus simulation system of Huazhong University of Science and Technology is described. The key issues of simulation application based on Creator and Vega are discussed in detail and some applications of the visual campus system are also given.展开更多
This paper mainly focused on the growth law, model construction and visualization of a soybean root. A pot experiment was conducted in the laboratory to collect root system data and measure soybean root＇s length, dia...This paper mainly focused on the growth law, model construction and visualization of a soybean root. A pot experiment was conducted in the laboratory to collect root system data and measure soybean root＇s length, diameter and number by excavating in different periods. On the basis of an in-depth analysis of root structure geometry, we analyzed the collected experimental data with logistic equations, and got the growth of soybean root equation, according to its morphological structure characteristics of self-similarity, and discussed the virtual modeling method on the soybean root based on L-system and in Visual c＋＋ Using OpenGL technology to achieve a soybean root system topology model and visualization simulation.展开更多
Based on the mathematical model for rock temperature distribution in a geo-thermal field,the properties of rock temperature distribution in geothermal field for fourkinds of surrounding rock cross-sections of tunnels ...Based on the mathematical model for rock temperature distribution in a geo-thermal field,the properties of rock temperature distribution in geothermal field for fourkinds of surrounding rock cross-sections of tunnels in a deep mine were simulated by us-ing finite element method.It is shown that the relationship for rock temperature distributionvaried with the geothermal parameters,time and space.Namely, 2-dimensionaltime-dependent isograms clearly showed the process for rock temperature variation anddistribution in a geothermal field which has been redisplayed with visualization numericalsimulation.展开更多
A framework for accelerating modern long-running astrophysical simulations is presented, which is based on a hierarchical architecture where computational steering in the high-resolution run is performed under the gui...A framework for accelerating modern long-running astrophysical simulations is presented, which is based on a hierarchical architecture where computational steering in the high-resolution run is performed under the guide of knowledge obtained in the gradually refined ensemble analyses. Several visualization schemes for facilitating ensemble management, error analysis, parameter grouping and tuning are also integrated owing to the pluggable modular design. The proposed approach is prototyped based on the Flash code, and it can be extended by introducing userdefined visualization for specific requirements. Two real-world simulations, i.e., stellar wind and supernova remnant, are carried out to verify the proposed approach.展开更多
Taking the actual project of teaching and researching process for example, the relationship between the industrial engineering and product development is discussed. And use the novel visualization technology to suppor...Taking the actual project of teaching and researching process for example, the relationship between the industrial engineering and product development is discussed. And use the novel visualization technology to support the industrial engineering and product development. How to use the new computer modeling and simulating technologies to support the product development and industrial engineering, is introduced especially. The support includes both domestic products and industrial systems. The visualization and computer technologies take a very impo[tant role in some system or multi-direction modeling, those technologies mentioned above can help the industrial engineers study the effect of design on the whole life circle, including the producing steps. So the engineers can avoid making the wrong decision which may cause bad effects on the whole industrial engineering.展开更多
Background:Cognitive assessments,such as the Montreal Cognitive Assessment(MoCA),use components that assume intact sensory abilities,however,adults show concomitant decreases in visual acuity with increasing age.Score...Background:Cognitive assessments,such as the Montreal Cognitive Assessment(MoCA),use components that assume intact sensory abilities,however,adults show concomitant decreases in visual acuity with increasing age.Scores on cognitive assessments are typically lower for individuals with visual impairments compared to individuals with normal/corrected to normal vision.But it is not clear if lowers scores on cognitive assessments are due to the assessments relying on visual stimuli,or if individuals with visual impairments are actually more likely to have cognitive impairments.Therefore we simulated visual impairments,i.e.,reduced visual acuity and contrast sensitivity,in young healthy adults to determine how this impacts their scores on a measure of cognitive ability,i.e.,the MoCA.Methods:Participants(n=19)completed one of the three version of the MoCA under three conditions(20/20,simulated 20/80,simulated 20/200).The MoCA was administered following the clinical protocols.Only participants that scored>26(i.e.,normal cognitive function)at 20/20 were included in the analysis.For comparison,we included MoCA data from a sample of older adults with normal vision(n=19,Mage=74,Acuity M=0.04 logMAR,SD=0.16)or visual impairment(n=19,Mage=79,Acuity M=0.35 logMAR,SD=0.3).Results:Acuity of participants at 20/20(M=0.06 LogMAR,SD=0.1),simulated 20/80(M=0.63,SD=0.18)and simulated 20/200(M=0.88,SD=0.19)showed that the participants experienced simulated acuity loss with the goggles.For the MoCA scores,we found a main effect of acuity(F=16.22,P<0.001,η2=0.375,BF10=5,618).Planned post hoc comparisons showed a significant difference between scores with a 20/20 acuity(M=27.26,SD=0.93)and 20/80(M=24.74,SD=1.66,t=5.62,ptukey<0.001,d=1.88),and between 20/20 and 20/200(M=25.63,SD=1.46,t=3.63,ptukey=0.002,Cohen’s d=1.33).However,no difference was observed between 20/80 and 20/200(t=−1.99,ptukey=0.125,d=0.572).The MoCA scores in older adults with normal vision(M=27.32,SD=2.41)and with visual impairment(M=26.68,SD=2.52),did not differ significantly(t36=−0.787,P=0.436,d=0.26,BF10=0.4).Conclusions:Our findings show that simulated reductions in visual acuity and contrast sensitivity lead to lower scores on measures of cognitive ability,specifically the MoCA.However,it appears that older adults with actual visual impairments may have developed compensatory strategies to adapt to this loss in visual acuity as there were no significant differences in scores of older adults with and without visual impairments.Therefore,we would recommend that when assessing an individual with visual impairments to conduct the cognitive test by re-scoring it without the visual components,e.g.,the MoCA Blind,to magnify the visual components,or to substitue the visual component when possible using auditory alternatives,e.g.,the oral trail making task.展开更多
Background:In recent years,the development of digital imaging technology has had a significant influence in liver surgery.The ability to obtain a 3-dimensional(3D)visualization of the liver anatomy has provided surger...Background:In recent years,the development of digital imaging technology has had a significant influence in liver surgery.The ability to obtain a 3-dimensional(3D)visualization of the liver anatomy has provided surgery with virtual reality of simulation 3D computer models,3D printing models and more recently holograms and augmented reality(when virtual reality knowledge is superimposed onto reality).In addition,the utilization of real-time fluorescent imaging techniques based on indocyanine green(ICG)uptake allows clinicians to precisely delineate the liver anatomy and/or tumors within the parenchyma,applying the knowledge obtained preoperatively through digital imaging.The combination of both has transformed the abstract thinking until now based on 2D imaging into a 3D preoperative conception(virtual reality),enhanced with real-time visualization of the fluorescent liver structures,effectively facilitating intraoperative navigated liver surgery(augmented reality).Data sources:A literature search was performed from inception until January 2021 in MEDLINE(Pub Med),Embase,Cochrane library and database for systematic reviews(CDSR),Google Scholar,and National Institute for Health and Clinical Excellence(NICE)databases.Results:Fifty-one pertinent articles were retrieved and included.The different types of digital imaging technologies and the real-time navigated liver surgery were estimated and compared.Conclusions:ICG fluorescent imaging techniques can contribute essentially to the real-time definition of liver segments;as a result,precise hepatic resection can be guided by the presence of fluorescence.Furthermore,3D models can help essentially to further advancing of precision in hepatic surgery by permitting estimation of liver volume and functional liver remnant,delineation of resection lines along the liver segments and evaluation of tumor margins.In liver transplantation and especially in living donor liver transplantation(LDLT),3D printed models of the donor’s liver and models of the recipient’s hilar anatomy can contribute further to improving the results.In particular,pediatric LDLT abdominal cavity models can help to manage the largest challenge of this procedure,namely large-for-size syndrome.展开更多
The switching arc that occurs in contact gap when contact of low voltage apparatus closes or breaks in electric circuit is harmful to the contacts, insulation, and reliability of electrical gear because of its very hi...The switching arc that occurs in contact gap when contact of low voltage apparatus closes or breaks in electric circuit is harmful to the contacts, insulation, and reliability of electrical gear because of its very high temperature. As arcing time is very short in switching gear, it is very difficult to observe arc phenomena directly for researchers. Therefore, visualization of switching arc is important for understanding arc phenomena, to analyze the arc features, and to improve the design and reliability of switching gear. Based on analyzing the visualization methods proposed by researchers, a new switching arc capturing approach is introduced in this paper. Arc image acquisition, and image processing techniques were studied. A switching arc image acquisition and visual simulation software based on high speed CCD camera hard ware system was designed and implemented to yield en- hanced arc image with good visual effect.展开更多
The Building Information Modelling (BIM) methodology has been adopted in the construction industry, supporting the development of projects. Its implementation has improved the collaboration and integration in the desi...The Building Information Modelling (BIM) methodology has been adopted in the construction industry, supporting the development of projects. Its implementation has improved the collaboration and integration in the design context, increasing the accuracy of the project preparation and the decreasing additional costs and delays of the construction work. The main objective of the present research is to provide an overview of the state of the art of BIM applications, namely, concerning the construction planning. For that, the generation of a BIM 3D model, involving the disciplines of architecture, structures and water supply system was performed. After, over the model a conflict analysis was applied, in order to verify the consistency of all the disciplines, when linked together. In order to obtain a visual simulation of the construction process, the correspondent 4D BIM model was also generated. Along the development of the study, distinct BIM software was applied over a case study. The main remarks of the capacities of the software, as well as the benefits and limitations verified were identified.展开更多
The widespread use of numerical simulations in different scientific domains provides a variety of research opportunities.They often output a great deal of spatio-temporal simulation data,which are traditionally charac...The widespread use of numerical simulations in different scientific domains provides a variety of research opportunities.They often output a great deal of spatio-temporal simulation data,which are traditionally characterized as single-run,multi-run,multi-variate,multi-modal and multi-dimensional.From the perspective of data exploration and analysis,we noticed that many works focusing on spatiotemporal simulation data often share similar exploration techniques,for example,the exploration schemes designed in simulation space,parameter space,feature space and combinations of them.However,it lacks a survey to have a systematic overview of the essential commonalities shared by those works.In this survey,we take a novel multi-space perspective to categorize the state-ofthe-art works into three major categories.Specifically,the works are characterized as using similar techniques such as visual designs in simulation space(e.g,visual mapping,boxplot-based visual summarization,etc.),parameter space analysis(e.g,visual steering,parameter space projection,etc.)and data processing in feature space(e.g,feature definition and extraction,sampling,reduction and clustering of simulation data,etc.).展开更多
Based on the status quantity of water resources in Xi′an region, a commentary on many math models is given for water resources operation and management, and the visual model is provided to solve practical problems. ...Based on the status quantity of water resources in Xi′an region, a commentary on many math models is given for water resources operation and management, and the visual model is provided to solve practical problems. In this model, the information for decision is visible in GIS (Geographic Information Systems) and topological figures. With object orientation methods, the objects are described in proprieties, methods, relations and time periods. The simulation process of the model is developed with Delphi and MapInfo, and the real decision scheme could be examined and practice decision process can be simulated from which. Decision analysis conducted from visual conditions is believable. The exploration to visual model is a beginning of practice research, much more study of which still needs to do.展开更多
The purpose of this study is to realize the intelligent deliberative obstacle avoidance for unmanned surface vehicle(USV), based on the International Regulations for Preventing Collisions at Sea called COLREGS.Firstly...The purpose of this study is to realize the intelligent deliberative obstacle avoidance for unmanned surface vehicle(USV), based on the International Regulations for Preventing Collisions at Sea called COLREGS.Firstly, a three-level system architecture is designed for the ship intelligent collision avoidance system. Secondly,an intelligent collision avoidance algorithm is presented based on the calculation of motion parameters and the rules of COLREGS. Thirdly, according to COLREGS, the marine environment is modeled from the electronic chart data and radar information, and a deliberative collision avoidance algorithm is written. Finally, the deliberative collision avoidance simulation is carried out for the USV. The feasibility and reliability of intelligent collision avoidance algorithm are verified by the vivid simulation results.展开更多
Of the various kinds of research on the Virtual Reality and GIS, stereo-view is one of the key technologies . The following two aspects are covered in this paper. (1)Physiological fundamental of the natural binocular ...Of the various kinds of research on the Virtual Reality and GIS, stereo-view is one of the key technologies . The following two aspects are covered in this paper. (1)Physiological fundamental of the natural binocular stereo-vision, theory of 3D color TV and the stereo-view on the CRT screen are presented, especially the theory of widely adopted Time-Division System is introduced. (2) The preliminary practice for using the sterecrview technology on the screen to the terrain visual simulation is described, and the paper shows how to use 3DS to construct a movable real stereo terrain perspective by taking DTM data as the first hand information for the purpose of terrain visual simulation.展开更多
In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes ...In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes installed at the stator leading-edge（LE）.The airfoil-probes have a negative influence on the compressor aerodynamic performance at all operating points.A streamwise vortex is induced by the airfoil-probe along both sides of the blade.At the mid-operating point,the vortex is notable along the pressure side and is relatively small along the suction side（SS）.At the near-stall point,the vortex is slightly suppressed in the pressure surface（PS）,but becomes remarkable in the suction side.A small local-separation is induced by the interactions between the vortex and the end-wall boundary layer in the corner region near the hub.That the positive pitch angle of the airfoil-probe at 6.5% span is about 15° plays an important role in the vortex evolution near the hub,which causes the fact that the airfoil-probe near the hub has the largest effects among the four airfoil-probes.In order to get a further understanding of the vortex evolution in the stator in the numerical simulation,a flow visualization experiment in a water tunnel is performed.The flow visualization results give a deep insight into the evolution of the vortex induced by the airfoil-probe.展开更多
文摘The development process as well as the core theory of distributed interactive simulation and high level architecture are discussed, and combined with graphics features, a system of real time distributed visual simulation is established. Based on computer network, simulation platform is built by installing related software and modeling object, and the interactive functions are extended by programming. A set of solutions for building a distributed visual simulation system that include both hardware and software are put forward, and a practical instance is also provided. The whole building process can be summarized into two steps that are scheme consideration and system realization.
基金This project is supported by Provincial Natural Science Foundation of Hebei (No.502214).
文摘To simulate the process of cold roll-forming process, a new method isadopted. The theoretical foundation of this method is an elastic-plastic large deformation splinefinite strip method based on object-oriented programming. Combined with the computer graphicstechnology, the visual simulation of cold roll-forming is completed and the system is established.By analyzing common channel steel, the process is shown and explained including theory method, modeland result display. So the simulation system is already a kind of mature and effective tool toanalyze the process of cold roll forming.
基金Supported by Tianjin Research Program of Application Foundation and Advanced Technology (No.12JCZDJC29200)Foundation for Innovative Research Groups of National Natural Science Foundation of China (No.51021004)National Key Technology R&D Program in the 12th Five-Year Plan of China(No.2011BAB10B06)
文摘Any tidal defense engineering involves the collection and analysis of massive information about engineering structures and their surrounding environment. Traditional method, which is carried out mainly by means of twodimensional drawings and textures, is not efficient and intuitive enough to analyze the whole project and reflect its spatial relationship. Three-dimensional visual simulation provides an advanced technical means of solving this problem. In this paper, triangular irregular network (TIN) model simplified by non-uniform rational B-splines (NURBS) technique was used to establish the digital terrain model (DTM) of a super large region. Simulation of dynamic water surface was realized by combining noise function with sine wave superposition method. Models of different objects were established with different modeling techniques according to their characteristics. Application of texture mapping technology remarkably improved the authenticity of the models. Taking the tidal defense engineering in the new coastal region of Tianjin as a case study, three-dimensional visual simulation and dynamic roaming of the study area were realized, providing visual analysis and visible demonstration method for the management and emergency decision-making associated with construction.
基金Supported by National Natural Science Foundation of China (No.50539120)Natural Fund for Distinguished Young Scholars of China(No.50525927)
文摘The methodology of visual simulation for a tunnel engineering construction schedule is presented. Visualization of simulation model, calculation and result of construction schedule simulation is realized, and the construction simulation and the resource optimization of tunnel engineering are made. A risk analysis and a decision-making method of tunnel engineering construction schedule based on visual simulation are presented. Furthermore, using S curve theory and schedule management method, the real-time management and control method of tunnel engineering construction based on visual simulation is presented. The application to the tunnel engineering construction schedule analysis and management shows the feasibility and effectiveness of the method presented in this paper.
基金Supported by the Communication Science and Technology Fund Item of Hubei Province(2003)
文摘Applying the visual simulation technology to highway engineering, an expressway visual simulation system for the analysis of landscape design proposals is built during the construction of Xiaoxiang expressway. Its functional requirements and overall architecture are presented. The 3D model of expressway is created with AutoCAD DWG files as source data and the dynamic design method of expressway landscape elements is introduced. A data analysis interface dedicated to the landscape evaluation is developed. The system offers an effective tool to facilitate the analysis and evaluation of the road landscape proposals.
文摘Fundamental conception and technological features of Digital Campus as well as the general framework of its visualization subsystem are introduced. A practical case of visual campus simulation system of Huazhong University of Science and Technology is described. The key issues of simulation application based on Creator and Vega are discussed in detail and some applications of the visual campus system are also given.
基金Supported by the Scientific Research Project of Heilongjiang Province(11551054)
文摘This paper mainly focused on the growth law, model construction and visualization of a soybean root. A pot experiment was conducted in the laboratory to collect root system data and measure soybean root＇s length, diameter and number by excavating in different periods. On the basis of an in-depth analysis of root structure geometry, we analyzed the collected experimental data with logistic equations, and got the growth of soybean root equation, according to its morphological structure characteristics of self-similarity, and discussed the virtual modeling method on the soybean root based on L-system and in Visual c＋＋ Using OpenGL technology to achieve a soybean root system topology model and visualization simulation.
文摘Based on the mathematical model for rock temperature distribution in a geo-thermal field,the properties of rock temperature distribution in geothermal field for fourkinds of surrounding rock cross-sections of tunnels in a deep mine were simulated by us-ing finite element method.It is shown that the relationship for rock temperature distributionvaried with the geothermal parameters,time and space.Namely, 2-dimensionaltime-dependent isograms clearly showed the process for rock temperature variation anddistribution in a geothermal field which has been redisplayed with visualization numericalsimulation.
基金Supported by the National Natural Science Foundation of China(No.U1231108)
文摘A framework for accelerating modern long-running astrophysical simulations is presented, which is based on a hierarchical architecture where computational steering in the high-resolution run is performed under the guide of knowledge obtained in the gradually refined ensemble analyses. Several visualization schemes for facilitating ensemble management, error analysis, parameter grouping and tuning are also integrated owing to the pluggable modular design. The proposed approach is prototyped based on the Flash code, and it can be extended by introducing userdefined visualization for specific requirements. Two real-world simulations, i.e., stellar wind and supernova remnant, are carried out to verify the proposed approach.
文摘Taking the actual project of teaching and researching process for example, the relationship between the industrial engineering and product development is discussed. And use the novel visualization technology to support the industrial engineering and product development. How to use the new computer modeling and simulating technologies to support the product development and industrial engineering, is introduced especially. The support includes both domestic products and industrial systems. The visualization and computer technologies take a very impo[tant role in some system or multi-direction modeling, those technologies mentioned above can help the industrial engineers study the effect of design on the whole life circle, including the producing steps. So the engineers can avoid making the wrong decision which may cause bad effects on the whole industrial engineering.
文摘Background:Cognitive assessments,such as the Montreal Cognitive Assessment(MoCA),use components that assume intact sensory abilities,however,adults show concomitant decreases in visual acuity with increasing age.Scores on cognitive assessments are typically lower for individuals with visual impairments compared to individuals with normal/corrected to normal vision.But it is not clear if lowers scores on cognitive assessments are due to the assessments relying on visual stimuli,or if individuals with visual impairments are actually more likely to have cognitive impairments.Therefore we simulated visual impairments,i.e.,reduced visual acuity and contrast sensitivity,in young healthy adults to determine how this impacts their scores on a measure of cognitive ability,i.e.,the MoCA.Methods:Participants(n=19)completed one of the three version of the MoCA under three conditions(20/20,simulated 20/80,simulated 20/200).The MoCA was administered following the clinical protocols.Only participants that scored>26(i.e.,normal cognitive function)at 20/20 were included in the analysis.For comparison,we included MoCA data from a sample of older adults with normal vision(n=19,Mage=74,Acuity M=0.04 logMAR,SD=0.16)or visual impairment(n=19,Mage=79,Acuity M=0.35 logMAR,SD=0.3).Results:Acuity of participants at 20/20(M=0.06 LogMAR,SD=0.1),simulated 20/80(M=0.63,SD=0.18)and simulated 20/200(M=0.88,SD=0.19)showed that the participants experienced simulated acuity loss with the goggles.For the MoCA scores,we found a main effect of acuity(F=16.22,P<0.001,η2=0.375,BF10=5,618).Planned post hoc comparisons showed a significant difference between scores with a 20/20 acuity(M=27.26,SD=0.93)and 20/80(M=24.74,SD=1.66,t=5.62,ptukey<0.001,d=1.88),and between 20/20 and 20/200(M=25.63,SD=1.46,t=3.63,ptukey=0.002,Cohen’s d=1.33).However,no difference was observed between 20/80 and 20/200(t=−1.99,ptukey=0.125,d=0.572).The MoCA scores in older adults with normal vision(M=27.32,SD=2.41)and with visual impairment(M=26.68,SD=2.52),did not differ significantly(t36=−0.787,P=0.436,d=0.26,BF10=0.4).Conclusions:Our findings show that simulated reductions in visual acuity and contrast sensitivity lead to lower scores on measures of cognitive ability,specifically the MoCA.However,it appears that older adults with actual visual impairments may have developed compensatory strategies to adapt to this loss in visual acuity as there were no significant differences in scores of older adults with and without visual impairments.Therefore,we would recommend that when assessing an individual with visual impairments to conduct the cognitive test by re-scoring it without the visual components,e.g.,the MoCA Blind,to magnify the visual components,or to substitue the visual component when possible using auditory alternatives,e.g.,the oral trail making task.
文摘Background:In recent years,the development of digital imaging technology has had a significant influence in liver surgery.The ability to obtain a 3-dimensional(3D)visualization of the liver anatomy has provided surgery with virtual reality of simulation 3D computer models,3D printing models and more recently holograms and augmented reality(when virtual reality knowledge is superimposed onto reality).In addition,the utilization of real-time fluorescent imaging techniques based on indocyanine green(ICG)uptake allows clinicians to precisely delineate the liver anatomy and/or tumors within the parenchyma,applying the knowledge obtained preoperatively through digital imaging.The combination of both has transformed the abstract thinking until now based on 2D imaging into a 3D preoperative conception(virtual reality),enhanced with real-time visualization of the fluorescent liver structures,effectively facilitating intraoperative navigated liver surgery(augmented reality).Data sources:A literature search was performed from inception until January 2021 in MEDLINE(Pub Med),Embase,Cochrane library and database for systematic reviews(CDSR),Google Scholar,and National Institute for Health and Clinical Excellence(NICE)databases.Results:Fifty-one pertinent articles were retrieved and included.The different types of digital imaging technologies and the real-time navigated liver surgery were estimated and compared.Conclusions:ICG fluorescent imaging techniques can contribute essentially to the real-time definition of liver segments;as a result,precise hepatic resection can be guided by the presence of fluorescence.Furthermore,3D models can help essentially to further advancing of precision in hepatic surgery by permitting estimation of liver volume and functional liver remnant,delineation of resection lines along the liver segments and evaluation of tumor margins.In liver transplantation and especially in living donor liver transplantation(LDLT),3D printed models of the donor’s liver and models of the recipient’s hilar anatomy can contribute further to improving the results.In particular,pediatric LDLT abdominal cavity models can help to manage the largest challenge of this procedure,namely large-for-size syndrome.
基金Project (No. 60675014) supported by the National Natural Science Foundation of China
文摘The switching arc that occurs in contact gap when contact of low voltage apparatus closes or breaks in electric circuit is harmful to the contacts, insulation, and reliability of electrical gear because of its very high temperature. As arcing time is very short in switching gear, it is very difficult to observe arc phenomena directly for researchers. Therefore, visualization of switching arc is important for understanding arc phenomena, to analyze the arc features, and to improve the design and reliability of switching gear. Based on analyzing the visualization methods proposed by researchers, a new switching arc capturing approach is introduced in this paper. Arc image acquisition, and image processing techniques were studied. A switching arc image acquisition and visual simulation software based on high speed CCD camera hard ware system was designed and implemented to yield en- hanced arc image with good visual effect.
文摘The Building Information Modelling (BIM) methodology has been adopted in the construction industry, supporting the development of projects. Its implementation has improved the collaboration and integration in the design context, increasing the accuracy of the project preparation and the decreasing additional costs and delays of the construction work. The main objective of the present research is to provide an overview of the state of the art of BIM applications, namely, concerning the construction planning. For that, the generation of a BIM 3D model, involving the disciplines of architecture, structures and water supply system was performed. After, over the model a conflict analysis was applied, in order to verify the consistency of all the disciplines, when linked together. In order to obtain a visual simulation of the construction process, the correspondent 4D BIM model was also generated. Along the development of the study, distinct BIM software was applied over a case study. The main remarks of the capacities of the software, as well as the benefits and limitations verified were identified.
基金supported by the National Natural Science Foundation of China(NSFC)Grant Nos.61702271,61702270.
文摘The widespread use of numerical simulations in different scientific domains provides a variety of research opportunities.They often output a great deal of spatio-temporal simulation data,which are traditionally characterized as single-run,multi-run,multi-variate,multi-modal and multi-dimensional.From the perspective of data exploration and analysis,we noticed that many works focusing on spatiotemporal simulation data often share similar exploration techniques,for example,the exploration schemes designed in simulation space,parameter space,feature space and combinations of them.However,it lacks a survey to have a systematic overview of the essential commonalities shared by those works.In this survey,we take a novel multi-space perspective to categorize the state-ofthe-art works into three major categories.Specifically,the works are characterized as using similar techniques such as visual designs in simulation space(e.g,visual mapping,boxplot-based visual summarization,etc.),parameter space analysis(e.g,visual steering,parameter space projection,etc.)and data processing in feature space(e.g,feature definition and extraction,sampling,reduction and clustering of simulation data,etc.).
基金″Ninth-Five-Year Plan″for Science and Technology in China(95 /91 2 /0 5 /0 2 )
文摘Based on the status quantity of water resources in Xi′an region, a commentary on many math models is given for water resources operation and management, and the visual model is provided to solve practical problems. In this model, the information for decision is visible in GIS (Geographic Information Systems) and topological figures. With object orientation methods, the objects are described in proprieties, methods, relations and time periods. The simulation process of the model is developed with Delphi and MapInfo, and the real decision scheme could be examined and practice decision process can be simulated from which. Decision analysis conducted from visual conditions is believable. The exploration to visual model is a beginning of practice research, much more study of which still needs to do.
基金the National Natural Science Foundation of China(No.51309148)the Science&Technology Program of Shanghai Maritime University(No.20130433)the Shanghai Training Foundation for Young Colleges Teachers(No.ZZshhs12055)
文摘The purpose of this study is to realize the intelligent deliberative obstacle avoidance for unmanned surface vehicle(USV), based on the International Regulations for Preventing Collisions at Sea called COLREGS.Firstly, a three-level system architecture is designed for the ship intelligent collision avoidance system. Secondly,an intelligent collision avoidance algorithm is presented based on the calculation of motion parameters and the rules of COLREGS. Thirdly, according to COLREGS, the marine environment is modeled from the electronic chart data and radar information, and a deliberative collision avoidance algorithm is written. Finally, the deliberative collision avoidance simulation is carried out for the USV. The feasibility and reliability of intelligent collision avoidance algorithm are verified by the vivid simulation results.
文摘Of the various kinds of research on the Virtual Reality and GIS, stereo-view is one of the key technologies . The following two aspects are covered in this paper. (1)Physiological fundamental of the natural binocular stereo-vision, theory of 3D color TV and the stereo-view on the CRT screen are presented, especially the theory of widely adopted Time-Division System is introduced. (2) The preliminary practice for using the sterecrview technology on the screen to the terrain visual simulation is described, and the paper shows how to use 3DS to construct a movable real stereo terrain perspective by taking DTM data as the first hand information for the purpose of terrain visual simulation.
基金National Natural Science Foundation of China(51161130525)"111" Project (B08009)
文摘In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes installed at the stator leading-edge（LE）.The airfoil-probes have a negative influence on the compressor aerodynamic performance at all operating points.A streamwise vortex is induced by the airfoil-probe along both sides of the blade.At the mid-operating point,the vortex is notable along the pressure side and is relatively small along the suction side（SS）.At the near-stall point,the vortex is slightly suppressed in the pressure surface（PS）,but becomes remarkable in the suction side.A small local-separation is induced by the interactions between the vortex and the end-wall boundary layer in the corner region near the hub.That the positive pitch angle of the airfoil-probe at 6.5% span is about 15° plays an important role in the vortex evolution near the hub,which causes the fact that the airfoil-probe near the hub has the largest effects among the four airfoil-probes.In order to get a further understanding of the vortex evolution in the stator in the numerical simulation,a flow visualization experiment in a water tunnel is performed.The flow visualization results give a deep insight into the evolution of the vortex induced by the airfoil-probe.
