期刊文献+
共找到113篇文章
< 1 2 6 >
每页显示 20 50 100
AgInS_(2)量子点调控及其在WLED应用上的研究进展
1
作者 刘汉语 谢志翔 +5 位作者 陈婷 董延茂 周兴 袁妍 吴海涛 陈勇号 《功能材料》 CAS CSCD 北大核心 2024年第2期2041-2051,2104,共12页
AgInS_(2)量子点是一种有趣的材料,其近红外带隙范围从1.87到1.98 eV,作为直接带隙半导体,它能通过调节Ag/In比例来调节带隙,它还具有较宽的PL峰和较大的Stokes位移,同时低毒环保的特性也使它成为有望替代含Cd、Hg和Pb等重金属元素的二... AgInS_(2)量子点是一种有趣的材料,其近红外带隙范围从1.87到1.98 eV,作为直接带隙半导体,它能通过调节Ag/In比例来调节带隙,它还具有较宽的PL峰和较大的Stokes位移,同时低毒环保的特性也使它成为有望替代含Cd、Hg和Pb等重金属元素的二元量子点的理想材料,在光电器件领域尤其在发光二极管中有着广泛的应用前景。本文详细阐述了AgInS_(2)量子点晶体结构和发光机制,总结了其合成方法的特点并综述了通过壳体工程和掺杂的方法对AgInS_(2)量子点进行调控的策略,最后介绍了该类量子点在发光二极管方面的应用进展。 展开更多
关键词 AgInS_(2) 量子点 合成 优化 wled
下载PDF
Green Synthesis and Luminescent Properties of Mn4+ Doped Red Phosphor for WLED
2
作者 Xiaoyi Liu Guixia Liu 《Optics and Photonics Journal》 2023年第6期147-155,共9页
Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH&l... Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH<sub>4</sub>HF<sub>2</sub> and HCl instead of highly toxic HF. The K3</sub>MoO2</sub>F<sub>5</sub><sup>.</sup><sub></sub>2H2</sub>O:Mn4+</sup> phosphor has a blocky structure and exhibits sharp red emission at the range of 580 to 670 nm excited by the blue light at 470 nm. The fabricated WLED device at 20 mA current has low correlation color temperature (CCT = 3608 K) and high color rendering index (Ra = 90.1), which can significantly improve the electroluminescence performance of cold WLED devices. These results indicate that the K3</sub>MoO2</sub>F5</sub><sup>.</sup>2H2</sub>O:Mn4+</sup> phosphor has potential application value in warm WLED excited by blue light chip. . 展开更多
关键词 Mn4+ Green Synthesis PHOSPHOR wled
下载PDF
荧光碳点的合成、发光机制、固态发光及其在WLEDs中的应用
3
作者 岳劲松 袁方宇 +4 位作者 邱汉迅 李颖 李静 薛裕华 杨俊和 《新型炭材料(中英文)》 SCIE EI CAS CSCD 北大核心 2023年第3期478-495,共18页
荧光碳点(CDs)作为一种尺寸小于10 nm的新型碳质纳米材料,因其优异的荧光调谐性、良好的生物相容性以及来源广泛和成本低廉等优点而受到了广泛的研究。此外,由于CDs制备工艺简单、性能优异,在光学传感、能源、生物医学成像、白光发光二... 荧光碳点(CDs)作为一种尺寸小于10 nm的新型碳质纳米材料,因其优异的荧光调谐性、良好的生物相容性以及来源广泛和成本低廉等优点而受到了广泛的研究。此外,由于CDs制备工艺简单、性能优异,在光学传感、能源、生物医学成像、白光发光二极管(WLEDs)等领域均有广泛的应用。近年来,大量的CDs基固态光致发光材料被开发出来并应用于WLEDs领域。基于目前的研究,本文首先对CDs的合成策略进行了简要综述,随后详细介绍了CDs的光致发光机理和实现固态光致发光的方法,并且对CDs应用于WLEDs领域的最新进展进行了总结。最后,讨论了目前CDs研究面临的问题与挑战。 展开更多
关键词 碳点 光致发光 固态发光 白色发光二极管
原文传递
室温批量合成高质量无机钙钛矿量子点及其WLED应用
4
作者 沈亚龙 陈鹏 +2 位作者 胡殷茜 崔磊 王跃 《光子学报》 EI CAS CSCD 北大核心 2023年第11期45-52,共8页
为克服在大批量合成无机钙钛矿量子点(CsPbBr_(3))时出现的材料光学性能下降的问题,提出了一种改进的室温溶液工艺,通过加入HBr促进前驱体的分散溶解,同时引入路易斯酸配体部分取代油胺,实现量子点表面的缺陷态有效钝化,合成出高质量的C... 为克服在大批量合成无机钙钛矿量子点(CsPbBr_(3))时出现的材料光学性能下降的问题,提出了一种改进的室温溶液工艺,通过加入HBr促进前驱体的分散溶解,同时引入路易斯酸配体部分取代油胺,实现量子点表面的缺陷态有效钝化,合成出高质量的CsPbBr_(3)量子点材料。实验测试结果表明,合成出的CsPbBr_(3)量子点荧光发射峰位于517 nm处,发射峰半高宽仅有17 nm,荧光量子效率高达95%。利用制备出的绿光CsPbBr_(3)量子点和商用红色荧光粉混合,和以Ga N为基底的蓝光芯片组装成一个白光LED器件,该器件在20 m A的工作电流下获得流明效率达48.35 lm/W的白光。这种高效白光LED展示出无机钙钛矿量子点在通用照明、背光显示和光通信等领域中具有很大的应用潜力。 展开更多
关键词 钙钛矿量子点 室温溶液法 批量合成 白光LED
下载PDF
WLED照明应急控制电路的设计
5
作者 杨婷 景占荣 高田 《电源技术应用》 2010年第1期28-32,共5页
本文设计了一种宽范围输入的白光LED(WLED)恒流控制电路,内置锂电池应急照明模块,并具有对电池自动充电、应急自启动以及恒流供电等功能,实验证明控制电路所需各项性能指标均较好地实现。
关键词 wled光源 稳压 恒流 应急照明
下载PDF
YAG∶Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route 被引量:15
6
作者 张纳 王达健 +3 位作者 李岚 蒙延双 张晓松 明楠 《Journal of Rare Earths》 SCIE EI CAS CSCD 2006年第3期294-297,共4页
The sub-micron sized YAG∶Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pur... The sub-micron sized YAG∶Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1~3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors. 展开更多
关键词 软水铝石 溶胶-凝胶 稀土 荧光材料 wled
下载PDF
WLED驱动器芯片升压控制电路设计
7
作者 刘振 邵志标 《微电子学与计算机》 CSCD 北大核心 2014年第7期42-46,51,共6页
设计了一种用于白光LED(WLED)驱动器且具有PWM调光和模拟调光两种工作模式的升压控制电路.电路中,大电容补偿网络的引入和低电压提取电路的设计有效地提高了电路调光性能.利用0.5μm-BCD工艺库仿真,结果表明:PWM调光下,控制电路在零负... 设计了一种用于白光LED(WLED)驱动器且具有PWM调光和模拟调光两种工作模式的升压控制电路.电路中,大电容补偿网络的引入和低电压提取电路的设计有效地提高了电路调光性能.利用0.5μm-BCD工艺库仿真,结果表明:PWM调光下,控制电路在零负载与额定负载之间快速切换,切换时间小于12μs;模拟调光下,输出与调光电压实现自适应,支路电流为20mA时,WLED阵列为6×6、6×8、6×10,输出分别稳定在20.4V、27.0V和33.3V.该设计改善了WLED驱动器的调光比,进而提升LCD显示质量. 展开更多
关键词 wled 升压控制 补偿网络 低电压提取 自适应
下载PDF
驱动WLED不必4V
8
作者 Will Hadden 《电子设计工程》 2009年第2期109-110,共2页
白光LED(WLED)能为便携式电子产品的显示器提供背光,最常见的是需要4 V驱动电压的单个WLED,而单节锂电池平均电压为3.6 V,因此在使用单节锂电池驱动WLED的情况下需用升压转换器。探讨WLED的低电流应用与对其正向电压的影响,并介绍TI的新... 白光LED(WLED)能为便携式电子产品的显示器提供背光,最常见的是需要4 V驱动电压的单个WLED,而单节锂电池平均电压为3.6 V,因此在使用单节锂电池驱动WLED的情况下需用升压转换器。探讨WLED的低电流应用与对其正向电压的影响,并介绍TI的新款LED驱动器TPS7510。 展开更多
关键词 wled TPS7510 驱动器
下载PDF
基于计算机模拟TiO_(2)改性转光膜及pc-WLED研究 被引量:1
9
作者 薛辉 常睿 《传感器与微系统》 CSCD 北大核心 2021年第10期63-66,共4页
基于蒙特-卡洛计算机模拟方法,研究了TiO_(2)粒子不同掺杂浓度对转光膜和pc-WLED性能的调控。研究结果表明:转光膜的荧光发射强度随着TiO_(2)粒子质量分数的提升先升高后降低,在质量分数为2.0%时具有高值;Mie散射理论计算机模拟显示光... 基于蒙特-卡洛计算机模拟方法,研究了TiO_(2)粒子不同掺杂浓度对转光膜和pc-WLED性能的调控。研究结果表明:转光膜的荧光发射强度随着TiO_(2)粒子质量分数的提升先升高后降低,在质量分数为2.0%时具有高值;Mie散射理论计算机模拟显示光子传播自由程随粒子质量分数升高而降低,有利于光子散射系数提高和蓝光激发光子激发。进一步结合蓝光LED芯片实现pc-WLED的模拟,光谱分布曲线中蓝光强度随TiO_(2)粒子质量分数增加而降低,黄光荧光发射强度则表现升高趋势,均得益于粒子散射效应提高了激发光子与荧光粉粒子作用几率;对应器件在质量分数为2.0%时具有最高光通量415.8 lm,相较于未掺杂提高了14.83%。研究表明:基于TiO_(2)粒子散射效应可有效改性转光膜和pc-WLED的光色性能,对于获得高效率、低成本和高均匀度pc-WLED具有参考价值。 展开更多
关键词 荧光转换型白光二极管 转光膜 TiO_(2)粒子 光通量
下载PDF
碳点的合成、发光机理及在WLEDs中的应用 被引量:1
10
作者 王园迟 《广州化工》 CAS 2021年第17期5-8,共4页
荧光碳点是新型碳基纳米材料的一个新兴类别,由于其优异的荧光可调谐性,来源广泛,成本低廉,作为一种“绿色材料”逐渐登上了荧光纳米材料的舞台,受到研究学者们的广泛关注,引发了包括生物医学、化学传感、光电器件在内的许多领域的研究... 荧光碳点是新型碳基纳米材料的一个新兴类别,由于其优异的荧光可调谐性,来源广泛,成本低廉,作为一种“绿色材料”逐渐登上了荧光纳米材料的舞台,受到研究学者们的广泛关注,引发了包括生物医学、化学传感、光电器件在内的许多领域的研究热潮。近年来,大量的新型荧光碳点材料被开发并应用于WLEDs。本文从碳点的合成、荧光机理及WLEDs的应用角度对该领域的最新研究进展进行了综述,重点介绍了该领域最新相关的研究成果。 展开更多
关键词 碳点 荧光机理 白光二极管
下载PDF
A novel Eu^(3+)-doped phosphor-in-glass for WLEDs and the effect of borophosphate matrix
11
作者 Teng Ma Haohong Chen +5 位作者 Luqiao Yin Fang Lei Ying Shi Jianjun Xie Lei Zhang Lingcong Fan 《Journal of Rare Earths》 SCIE EI CAS CSCD 2023年第2期190-199,共10页
Phosphor-in-glass(PiG)is a potential color convertor for high power WLEDs.A novel glass matrix with advanced performance is still a challenge.Recently,Eu^(3+)doped glass matrix has attracted much consideration mainly ... Phosphor-in-glass(PiG)is a potential color convertor for high power WLEDs.A novel glass matrix with advanced performance is still a challenge.Recently,Eu^(3+)doped glass matrix has attracted much consideration mainly due to its red compensation.A new borophosphate matrix to realize Eu^(3+)red light was designed in the Na_(2)O-ZnO-P_(2)O_(5)-B_(2)O_(3)-Eu_(2)O_(3)system.Meanwhile,a series of PiGs composed of different concentrations of Y3Al5O12:Ce phosphor and the matrix were also fabricated by re-sintering.The crystallization of Eu^(3+)based phosphate offers a novel red emission quenching apart from normal concentration quenching in the glass system.No direct energy transfer but only little reabso rption occurs between Eu^(3+)and Ce^(3+)ions.The Ce^(3+)concentration effect is obvious on the electroluminescent color.The optimized color rendering index of 79.7,the CIE coordinates near natural white and the range of CCT from 3943 to 6097 K were obtained for the packaged white light emitting diodes(WLEDs)together with the excellent CCT stability higher than about 97.5%and the quadruple thermal conductivity than that of silicon resin.The work implies borophosphate glass based PiGs with fine transparence and energy conversion efficiency are promising for excellent WLEDs,while the LED by using the PiG sample without any yellow phosphor doped is of high color purity and has a potential use as the 465 nm blue source. 展开更多
关键词 Phosphor-in-glass Eu^(3+)ion Borophosphate glass wleds YAG:Ce Rare earths
原文传递
Design of luminescence in(Sr,Gd)Li(Al,Mg)_(3)N_(4):Eu^(2+)deep red phosphors via crystal field engineering for full-spectrum WLEDs
12
作者 Qing Lin Tongyu Gao +4 位作者 Yuanhong Liu Ronghui Liu Siwei Chen Xiaole Ma Chunlei Zhao 《Journal of Rare Earths》 SCIE EI CAS CSCD 2023年第8期1127-1134,I0001,共9页
Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural ... Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural modification.The correlations among structural evolution,crystal-field environment,and luminescence properties were elucidated.Replacing Sr^(2+)with Gd^(3+)in(Sr,Gd)LiAl_(3)N_(4):Eu^(2+)leads to the enhanced crystal field splitting,larger Stokes shift,and increased structural polyhedron distortion differences,consequently resulting in spectral red-shift and broadening.For further spectral tuning,Mg,with lower electronegativity,was also introduced to modify the local crystal structure,consequently resulting in a further red-shift towards 675 nm and enhanced photoluminescence intensity in(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+).What’s more,w-LEDs were fabricated by using blue LED chip,blue,green,red and deep red((Sr,Gd)Li(Al,Mg)_(3)N_(4):Eu^(2+))phosphors whose color rendering index were Ra 96.0 and R997.7.All above results demonstrate that the partial replacements of Sr^(2+)by Gd^(3+)and Al^(3+)by Mg^(2+)are effective methods for spectral modulation and(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)phosphors are suitable for highquality full-spectrum WLEDs. 展开更多
关键词 Full-spectrum wleds Structural modulation Deep red phosphor Rare earths
原文传递
Tunable multicolor luminescence in vanadates from yttrium to indium with enhanced luminous efficiency and stability for its application in WLEDs and indoor photovoltaics
13
作者 Yaoyang Zhang Jing Mao +1 位作者 Peifen Zhu Guofeng Wang 《Nano Research》 SCIE EI CSCD 2023年第8期11486-11494,共9页
The preparation of high-efficiency phosphor is the key to the construction of white light-emitting diode(WLED)devices and their application in indoor photovoltaics.Compared with YVO_(4),InVO_(4)is not suitable as the ... The preparation of high-efficiency phosphor is the key to the construction of white light-emitting diode(WLED)devices and their application in indoor photovoltaics.Compared with YVO_(4),InVO_(4)is not suitable as the host material of lanthanide ions because of its strong self-luminescence.Here,the work focused on combining the broadband emission from InVO_(4)and the red luminescence from YVO_(4):Eu^(3+)to obtain enhanced and stable multicolor luminescence.The band structure,density of state,and optical properties were studied by density functional theory.The spectral configuration of YVO_(4):In^(3+)/Eu^(3+)with(112)surface appears to be broadening and redshifts with increasing layer number.When the In^(3+)concentration is 3.5 mol%,the YVO_(4):30%Eu^(3+)/In^(3+)emits the strongest light.The Judd-Ofelt parameterΩ2 of YVO_(4):In^(3+)/Eu^(3+)increases with increaing In^(3+)concentration,indicating that the symmetry decreases.By adjusting In^(3+)/Eu^(3+)contents,the YVO_(4):In^(3+)/Eu^(3+)not only can emit white light with a color rendering index of 95,but also can be used as high-efficiency red phosphor to build WLED devices with blue emitting N/Tb codoped carbon quantum dots(CQDs-N:Tb^(3+))and green emitting MOF:Tb^(3+)(MOF=metal organic framework),for which the color rendering index can also reach 95 and the color temperature is 5549 K.The manufactured WLED devices were further used to excite the silicon solar cell and make it show good photoelectric characteristics. 展开更多
关键词 luminescence enhancement multicolor stability density functional theory(DFT)calculation white light-emitting diodes(wleds) indoor photovoltaics
原文传递
新型WLED荧光粉Ca_2MgSi_2O_7:Ce^(3+),Eu^(2+)的能量传递和光色研究 被引量:1
14
作者 丘志海 林林 +4 位作者 龚慧 陈海滨 吴彬 冯颖 郑志强 《中国稀土学报》 CAS CSCD 北大核心 2011年第5期544-548,共5页
用高温固相法制备了Ca2MgSi2O7:Ce3+,Eu2+,并研究其发光特性。Ce3+的发射带峰值位于410 nm,对应于Ce3+的5d→4f跃迁;Eu2+的发射带峰值位于530 nm,对应于Eu2+的5d→4f跃迁。双掺样品的发射光谱表明两种离子间存在高效的电偶极-电偶极能... 用高温固相法制备了Ca2MgSi2O7:Ce3+,Eu2+,并研究其发光特性。Ce3+的发射带峰值位于410 nm,对应于Ce3+的5d→4f跃迁;Eu2+的发射带峰值位于530 nm,对应于Eu2+的5d→4f跃迁。双掺样品的发射光谱表明两种离子间存在高效的电偶极-电偶极能量传递。当Ce3+和Eu2+浓度分别为2%和0.125%时,样品发射光谱(λex=360 nm)色坐标为(0.221,0.312),落在白光区。以上研究说明Ca2MgSi2O7:Ce3+,Eu2+是一种适用于近紫外芯片的新型WLED荧光粉,其光色可调谐。 展开更多
关键词 wled 荧光粉 硅酸盐 能量传递 稀土
原文传递
大功率白光LED荧光胶和荧光片玻璃封装的光热性能
15
作者 曾照明 万垂铭 +2 位作者 肖国伟 林宏伟 王洪 《发光学报》 EI CAS CSCD 北大核心 2024年第3期516-523,共8页
大功率白光LED封装主要分为玻璃荧光片封装和荧光粉胶封装。本文提出一种用荧光胶封装大功率白光LED的方法,优化白光LED的发光面的均匀性,并分析了荧光胶封装和用荧光片封装的大功率白光LED的光热性能。实验结果表明,在1 400 mA电流驱动... 大功率白光LED封装主要分为玻璃荧光片封装和荧光粉胶封装。本文提出一种用荧光胶封装大功率白光LED的方法,优化白光LED的发光面的均匀性,并分析了荧光胶封装和用荧光片封装的大功率白光LED的光热性能。实验结果表明,在1 400 mA电流驱动下,荧光胶封装白光LED的光通量为576.07 lm,比荧光片封装白光LED的光通量高15.5%,光转换效率为35.8%。在温度从25℃提升到125℃的过程中,荧光胶封装器件的亮度衰减了20%,色温从5 882.11 K提高到6 024.22 K。荧光胶封装的白光LED在常温下的热阻为1.7 K/W,与玻璃荧光片封装的热阻接近。在840 h高温高湿老化和1 600 h高温老化实验中,荧光胶封装的相对光衰均能稳定在97%。 展开更多
关键词 大功率白光LED 玻璃荧光片 荧光粉胶 光热性能 热稳定性
下载PDF
Red-emitting YAG:Ce,Mn transparent ceramics for warm WLEDs application 被引量:15
16
作者 Junrong LING Youfu ZHOU +4 位作者 Wentao XU He LIN Shuai LU Bin WANG Kun WANG 《Journal of Advanced Ceramics》 SCIE CSCD 2020年第1期45-54,共10页
A series of YAG:Ce,Mn transparent ceramics were prepared via a solid-state reaction-vacuum sintering method.The effects of various Mn^2+–Si4+pair doping levels on the structure,transmittance,and luminescence properti... A series of YAG:Ce,Mn transparent ceramics were prepared via a solid-state reaction-vacuum sintering method.The effects of various Mn^2+–Si4+pair doping levels on the structure,transmittance,and luminescence properties were systematically investigated.These transparent ceramics have average grain sizes of 10–16μm,clean grain boundaries,and excellent transmittance up to 83.4%at 800 nm.Under the excitation of 460 nm,three obvious emission peaks appear at 533,590,and 745 nm,which can be assigned to the transition 5 d→4 f of Ce^3+and 4 T1→6 A1 of Mn^2+.Thus,the Mn^2+–Si4+pairs can effectively modulate the emission spectrum by compensating broad orange-red and red spectrum component to yield high quality warm white light.After the optimized YAG:Ce,Mn transparent ceramic packaged with blue light-emitting diode(LED)chips,correlated color temperature(CCT)as low as 3723 K and luminous efficiency(LE)as high as 96.54 lm/W were achieved,implying a very promising candidate for application in white light-emitting diodes(WLEDs)industry. 展开更多
关键词 Mn^2+red-emitting YAG:Ce Mn transparent ceramics white light-emitting diodes(wleds)application low color temperature
原文传递
Blue–green color-tunable emissions in novel transparent Sr2LuF7:Eu/Tb glass-ceramics for WLEDs
17
作者 李晓曼 周少帅 +3 位作者 魏荣妃 刘雪云 曹丙强 郭海 《Chinese Optics Letters》 SCIE EI CAS CSCD 2020年第5期44-49,共6页
To introduce ordered nano-structures inside a transparent amorphous matrix with superior optical and mechanical properties bears scientific and technological importance,yet limited success has been achieved.Here,via s... To introduce ordered nano-structures inside a transparent amorphous matrix with superior optical and mechanical properties bears scientific and technological importance,yet limited success has been achieved.Here,via simple melting-quenching and subsequent thermal activation,we report the successful preparation of transparent nano-structured glass-ceramics embedded in Sr2Lu F7 nano-crystals(~26 nm),as evidenced by X-ray diffraction,transmission electron microscopy(TEM),and high resolution TEM.The successful incorporation of dopants into formed Sr2Lu F7 nano-crystals with low phonon energy results in highly tunable blue–green photoemission,which depends on excitation wavelength,dopant type,and temperature.We found that Eu3+and Eu2+ions co-exist in this hybrid optical material,accompanied by the broadband blue emission of Eu2+and sharp red emissions of Eu3+.A series of optical characterizations are summoned,including emission/excitation spectrum and decay curve measurement,to reveal the reduction mechanism of Eu3+to Eu2+.Furthermore,near green–white photoemission is achieved via the enrichment of Tb3+/Eu3+into crystallized Sr2Lu F7 nano-crystals.The temperature-dependent visible photoemission reveals thermal activation energy increases with the precipitation of Sr2Lu F7 nano-crystals in a glass matrix,suggesting better thermal stability of glass-ceramics than precursor glasses.These results could not only deepen the understanding of glass-ceramics but also indicate the promising potential of Eu3+/Tb3+-ions-doped Sr2Lu F7 glass-ceramics for UV pumped white light emitting diodes(WLEDs)with good thermal stability. 展开更多
关键词 glass-ceramics:Sr2LuF7nano-crystals wled:luminescent materials
原文传递
CsPb_(x)Sn_(1-x)Br_(3)/a⁃ZrP复合材料的光学性能及其在白色发光二极管中的应用
18
作者 吴春霞 贾瑞君 《发光学报》 EI CAS CSCD 北大核心 2023年第8期1413-1421,共9页
钙钛矿量子点(PQDs)由于具有高量子效率、可调节带隙、高色纯度及低成本等优点,在光电领域具有良好的应用前景。然而,其较差的稳定性阻碍了钙钛矿量子点的应用。本文在室温条件下合成了CsPb_(x)Sn_(1-x)Br_(3)/a‐ZrP PQDs,与传统CsPbBr... 钙钛矿量子点(PQDs)由于具有高量子效率、可调节带隙、高色纯度及低成本等优点,在光电领域具有良好的应用前景。然而,其较差的稳定性阻碍了钙钛矿量子点的应用。本文在室温条件下合成了CsPb_(x)Sn_(1-x)Br_(3)/a‐ZrP PQDs,与传统CsPbBr_(3) PQDs对比,具有更好的光学性能及稳定性。由于a‐ZrP对于Pb2+选择吸附性的固有特性以及与Cs+离子交换的能力,促进了量子点在a‐ZrP表面的吸附锚定。因此,合成的CsPb_(x)Sn_(1-x)Br_(3)/a‐ZrP PQDs具有更高的激子结合能和更强的环境稳定性。该复合材料为生产稳定高效的钙钛矿量子点提供了一种可行的方法,并表明CsPb_(x)Sn_(1-x)Br_(3)/a‐ZrP PQDs是一种高效的下转换荧光材料,可用于高效发光二极管的制备。 展开更多
关键词 钙钛矿 量子点 吸附 掺杂Sn^(2+) 荧光增强 白光发光二极管(wled)
下载PDF
Simple digital PWM and PSM controlled DC-DC boost converter for luminance-regulated WLED driver 被引量:4
19
作者 LIU Xin GUO Shu-xu CHANG Yu-chun ZHU Shun-dong WANG Shuai 《The Journal of China Universities of Posts and Telecommunications》 EI CSCD 2009年第2期98-102,共5页
这篇文章为一个 DC-DC 增加变换器基于简单数字脉搏宽度调整(DPWM ) 和脉搏翻斗车调整(PSM ) 介绍控制策略,到开车射出二极管(WLED ) 的一盏调整发光性的白灯。介绍控制策略不仅保留大多数优点和传统的数字 PWM 的灵活性,而且减少复... 这篇文章为一个 DC-DC 增加变换器基于简单数字脉搏宽度调整(DPWM ) 和脉搏翻斗车调整(PSM ) 介绍控制策略,到开车射出二极管(WLED ) 的一盏调整发光性的白灯。介绍控制策略不仅保留大多数优点和传统的数字 PWM 的灵活性,而且减少复杂性和费用。基于分析介绍控制策略的原则,白轻射出二极管(WLED ) 驱动程序被设计并且模仿了使用 0.6 m 互补金属氧化物半导体进程。当供应电压从 2.7 V 变化到 5.5 V 时,模拟电源效率为完整的负担超过 76% 的增加变换器表演结果,与 88% 的山峰效率。控制策略与轻负担为 PWM 模式克服低效率。 展开更多
关键词 白光LED驱动器 升压转换器 控制策略 数字PWM 亮度调节 DC 相移掩模 白光发光二极管
原文传递
Luminescence of halophosphate solid-solution Ca5(PO4)3(F0.8Cl0.2):Eu^2+,Mn^2+ for WLED 被引量:4
20
作者 Jiashan Mao Hongwei Fang Yonghu Chen 《Journal of Rare Earths》 SCIE EI CAS CSCD 2018年第11期1157-1161,共5页
Solid-solution based luminescent materials have been widely explored due to their tunable optical properties in recent years. In this work, instead of more common cation-substitution approach, we investigated the lumi... Solid-solution based luminescent materials have been widely explored due to their tunable optical properties in recent years. In this work, instead of more common cation-substitution approach, we investigated the luminescence properties of Eu^(2+) and Mn^(2+) co-doped halophosphate solid solution Ca_5(PO_4)_3(F_(0.8)Cl_(0.2)) via anion substitution synthesized by high temperature solid state reaction method.The formation of the solid solution was confirmed by X-ray diffraction(XRD) characterization, which indicates that the introduction of certain proportion of Cl^-will not make significant change on the Ca_5(PO_4)_3F lattice. We also studied the energy transfer from Eu^(2+) to Mn^(2+) in the host so as to obtain white light emission via adjusting the doping concentrations of Eu^(2+) and Mn^(2+). The white light emission was achieved through combination of Eu^(2+) blue emission and Mn^(2+) red-orange emission with appropriate proportions. The results suggest that Ca_5(PO_4)_3(F_(0.8)Cl_(0.2)):0.01Eu^(2+),0.18 Mn^(2+) could be a potential WLED phosphor working under ultraviolet excitation. 展开更多
关键词 Eu Mn 离子替换 X光检查 出租汽车 光性质 排放 光材料
原文传递
上一页 1 2 6 下一页 到第
使用帮助 返回顶部