A new three dimensional simulation method is introduced to study the workspace of a 6 PSS (P denotes a prismatic kinematic pair, S denotes a spherical kinematic pair) parallel machine tool. This algorithm adopts the...A new three dimensional simulation method is introduced to study the workspace of a 6 PSS (P denotes a prismatic kinematic pair, S denotes a spherical kinematic pair) parallel machine tool. This algorithm adopts the method of numerical analysis to investigate the boundary points in a series of sections which form the surface of the workspace. That is, to study such points that have the largest polar radius on a certain section in a system of polar coordinates according to conditions of constraint. The constraint conditions considered in the article include the maximum and minimum displacements of each dieblock, the maximum and minimum angles of oscillation in each hinge. By converting the constraint inequalities into constraint equations, the largest polar radius corresponding to every constraint condition can be evaluated and the minimum one is used to decide the boundary point. This algorithm greatly simplifies the computational process and can be used to analyze any section of the workspace. It provides a theoretical basis for the structural design of such a machine tool.展开更多
Although the parallel mechanisms have the advantages of high accuracy, velocity, stiffness, and payload capacity, the shortcomings of the space utilization and workspace limit the applications in the confined space. A...Although the parallel mechanisms have the advantages of high accuracy, velocity, stiffness, and payload capacity, the shortcomings of the space utilization and workspace limit the applications in the confined space. A novel 3 degrees of freedom spatial parallel manipulator 3-PSR-O（prismatic-spherical-revolute） is proposed, which possesses a compact architecture and extended workspace while maintaining the inherent advantages of the parallel mechanisms. The direct-inverse position, singularity and workspace are investigated. The mapping method is adopted in the position analysis, and the closed form solution is derived in the form of a six order equation. The singularity analysis of the mechanism is also carried out based on the geometrical constraints, including six singularity boundaries. A feature boundary, which is independent of the prismatic joints＇ stroke limit, is obtained by integrating the six singularity boundaries. According to the formation of the reachable workspace, a concept of basic workspace is also introduced and presented in the analytical way. By demarcating the basic workspace along the central height with the feature boundary, the reachable workspace can be derived and analyzed more efficiently. Finally, a comparative study on the space utilization between the 3-PSP parallel mechanism and the new mechanism is also presented. The area of feature boundary of the new mechanism is about 140% of the 3-PSP parallel mechanism, while its installation radius is only 1/2 of the 3-PSP parallel mechanism. The proposed parallel mechanism shows great space utilization, and is ideally suited for applications in confined space occasions such as immersion lithography, nano-imprint etc.展开更多
Current research on robotic dexterous hands mainly focuses on designing new finger and palm structures,as well as developing smarter control algorithms.Although the dimensional synthesis of dexterous hands with tradit...Current research on robotic dexterous hands mainly focuses on designing new finger and palm structures,as well as developing smarter control algorithms.Although the dimensional synthesis of dexterous hands with traditional rigid palms has been carried out,research on the dimensional synthesis of dexterous hands with metamorphic palms remains insufficient.This study investigated the dimensional synthesis of a palm of a novel metamorphic multi-fingered hand,and explored the geometric design for maximizing the precision manipulation workspace.Different indexes were used to value the workspace of the metamorphic hand,and the best proportions between the five links of the palm to obtain the optimal workspace of the metamorphic hand were explored.Based on the fixed total length of the palm member,four nondimensional design parameters that determine the size of the palm were introduced;through the discretization method,the influence of the four design parameters on the workspace of the metamorphic hand with full-actuated fingers and under-actuated fingers was analyzed.Based on the analysis of the metamorphic multi-fingered hand,the symmetrical structure of the palm was designed,resulting in the largest workspace of the multi-fingered hand,and proved that the metamorphic palm has a massive upgrade for the workspace of underactuated fingers.This research contributed to the dimensional synthesis of metamorphic dexterous hands,with practical significance for the design and optimization of novel metamorphic hands.展开更多
A wearable force-feedback glove is a promising way to enhance the immersive sensation when a user interacts with virtual objects in virtual reality scenarios.Design challenges for such a glove include allowing a large...A wearable force-feedback glove is a promising way to enhance the immersive sensation when a user interacts with virtual objects in virtual reality scenarios.Design challenges for such a glove include allowing a large fingertip workspace,providing a desired force sensation when simulating both free-and constrained-space interactions,and ensuring a lightweight structure.In this paper,we present a forcefeedback glove using a pneumatically actuated mechanism mounted on the dorsal side of the user’s hand.By means of a triple kinematic paired link with a curved sliding slot,a hybrid cam-linkage mechanism is proposed to transmit the resistance from the pneumatic piston rod to the fingertip.In order to obtain a large normal component of the feedback force on the user’s fingertip,the profile of the sliding slot was synthesized through an analysis of the force equilibrium on the triple kinematic paired link.A prototype five-fingered glove with a mass of 245 g was developed,and a wearable force-measurement system was constructed to permit the quantitative evaluation of the interaction performance in both free and constrained space.The experimental results confirm that the glove can achieve an average resistance of less than 0.1 N in free-space simulation and a maximum fingertip force of 4 N in constrained-space simulation.The experiment further confirms that this glove permits the finger to move freely to simulate typical grasping gestures.展开更多
With the increasingly more extensive application of the medical surgical robot in the clinic,higher requirements have been put forward for medical robots.The bone-attached robot,a popular orthopedic robot in recent ye...With the increasingly more extensive application of the medical surgical robot in the clinic,higher requirements have been put forward for medical robots.The bone-attached robot,a popular orthopedic robot in recent years,has a tendency of miniaturization and refinement.Thus,a bone-attached parallel manipulator(PM)based on 6-UCU(universalcylindrical-universal)configuration is proposed,which is characterized by small volume,compact structure,high precision and six-dimensional force feedback.To optimize the structure and make it more compact,the workspace of the 6-UCU PM is analyzed based on the analysis of three kinds of constraint,and workspace model is established through spherical coordinate search method.This study also analyzes the influence of structural parameters on workspace,which may contribute to improving the efficiency of design and ensuring small-sized robots possess relatively large workspace.Moreover,to improve the motion accuracy,an error modeling method is developed based on the structure of 6-UCU PMs.According to this established error model,the output pose error curves are drawn using MATLAB software when the structure parameters change,and the influence of the structure and pose parameters change on the output pose error of PMs is analyzed.The proposed research provides the instruction to design and analysis of small PMs such as bone-attached robots.展开更多
To determine workspace and relationship between the workspace and geometry of parallel manipulator is important for optimum design of parallel manipulators. In this paper, the workspace and the relationship between th...To determine workspace and relationship between the workspace and geometry of parallel manipulator is important for optimum design of parallel manipulators. In this paper, the workspace and the relationship between the workspace and the geometry of 3-UPU parallel manipulators with pure translation are investigated. Geometric and non-geometric constraints are defined and taken account of in determining the workspace of the translation 3-UPU manipulators. A direct average condition number is used as the global performance index of the workspace. This research shows that there exists an optimal value of the direct average condition number favorable for a good design of parallel mechanisms. The results presented in this paper are useful for the optimum design of 3-UPU parallel manipulators.展开更多
Researchers seldom study optimum design of a six-degree-of-freedom（DOF） parallel manipulator with three legs based upon the given workspace.An optimal design method of a novel three-leg six-DOF parallel manipulator...Researchers seldom study optimum design of a six-degree-of-freedom（DOF） parallel manipulator with three legs based upon the given workspace.An optimal design method of a novel three-leg six-DOF parallel manipulator（TLPM） is presented.The mechanical structure of this robot is introduced,with this structure the kinematic constrain equations is decoupled.Analytical solutions of the forward kinematics are worked out,one configuration of this robot,including position and orientation of the end-effector are graphically displayed.Then,on the basis of several extreme positions of the kinematic performances,the task workspace is given.An algorithm of optimal designing is introduced to find the smallest dimensional parameters of the proposed robot.Examples illustrate the design results,and a design stability index is introduced,which ensures that the robot remains a safe distance from the boundary of sits actual workspace.Finally,one prototype of the robot is developed based on this method.This method can easily find appropriate kinematic parameters that can size a robot having the smallest workspace enclosing a predefined task workspace.It improves the design efficiency,ensures that the robot has a small mechanical size possesses a large given workspace volume,and meets the lightweight design requirements.展开更多
In order to meet the polishing requirement of faucets and other products,a novel multi-station rotary polishing robot is designed,which is a PPPR + RR type of degree of freedom( DOF) distribution structure,and is simi...In order to meet the polishing requirement of faucets and other products,a novel multi-station rotary polishing robot is designed,which is a PPPR + RR type of degree of freedom( DOF) distribution structure,and is similar to dual-arm robot. Forward and inverse kinematic analysis is carried out by robot modeling. In order to make this robot structure more compact,first of all,X,Y and Z three moving degrees of freedom( DOF) limit stroke polishing need is calculated by using an artificial fish swarm algorithm,which analyzes dexterous workspace of this robot. Then,on the basis of the above analysis,the three DOF stroke is optimized. Simulation and polishing experimental results verify that this polishing robot with optimized stroke parameters can meet the polishing needs of faucets and other bathroom pieces.展开更多
An optimized workspace calculation method is proposed for parallel stabilized platform testing systems.This method refines the searched space progressively in order to approach the boundary of the workspace from both ...An optimized workspace calculation method is proposed for parallel stabilized platform testing systems.This method refines the searched space progressively in order to approach the boundary of the workspace from both the inside and the outside of it.The orientation density is defined and used as an evaluation index to calculate the orientation workspace.The algorithm of the orientation density is embedded into the computer program of the workspace calculation.Then the workspaces of the testing system are solved.In the solution,the orientation density is regarded as a discrete function of the reachable workspace.As a result,the reachable workspace and the orientation workspace are represented in the same multidimensional graphs.Finally the useful workspace of the testing system is determined based on these results.This case study indicates that the calculation efficiency is enhanced by adopting the optimized method and the practicability of workspace study is improved by proposing the orientation density.展开更多
We present a mathematical method for acceleration workspace analysis of cooperating multi-finger robot systems using a model of point-contact with friction. A new unified formulation from dynamic equations of cooperat...We present a mathematical method for acceleration workspace analysis of cooperating multi-finger robot systems using a model of point-contact with friction. A new unified formulation from dynamic equations of cooperating multi-finger robots is derived considering the force and acceleration relationships between the fingers and the object to be handled. From the dynamic equation, maximum translational and rotational acceleration bounds of an object are calculated under given constraints of contact conditions, configurations of fingers, and bounds on the torques of joint actuators for each finger. Here, the rotational acceleration bounds can be applied as an important manipulability index when the multi-finger robot grasps an object. To verify the proposed method, we used a set of case studies with a simple multi-finger mechanism system. The achievable acceleration boundary in task space can be obtained successfully with the proposed method and the acceleration boundary depends on the configurations of fingers.展开更多
The cooperative motion planning of nonholonomic wheeled mobile manipulators （WMM） with kinematic redundaney in the constrained workspace was studied. A trajectory planning method combining the probabilistic planning...The cooperative motion planning of nonholonomic wheeled mobile manipulators （WMM） with kinematic redundaney in the constrained workspace was studied. A trajectory planning method combining the probabilistic planning and the solving of inverse kinematic equations was presented. First, the probabilistie planning method was used to determine the guide configurations; then the switching objective function was defined and the path of the end-effector was constructed based on these guide configurations ; finally, the inverse kinematic equations of the WMM were solved using the gradient projection method, and the obstacle avoidance trajectory for joints of the WMM was obtained. Simulation results were given to demonstrate the effectiveness of the proposed method.展开更多
Presents the detailed algorithm established for determination of workspace for a 3-DOF coordinate measuring machine using parallel link mechanism by constructing the inverse kinematic model first and then reviewing th...Presents the detailed algorithm established for determination of workspace for a 3-DOF coordinate measuring machine using parallel link mechanism by constructing the inverse kinematic model first and then reviewing the physical and kinematical constraints from the structural characteristics of the parallel link mechanism, and discusses the actual geometries of workspace and the factors having effect on workspace through computer simulation thereby providing necessary theoretical basis for the research and development of coordinate measuring machines using parallel link mechanism.展开更多
One of the key issues for parallel mechanism is the kinematic characteristics,especially the workspace which varies with configuration parameters.A kind of 4UPS-UPU parallel mechanism is designed and its workspace is ...One of the key issues for parallel mechanism is the kinematic characteristics,especially the workspace which varies with configuration parameters.A kind of 4UPS-UPU parallel mechanism is designed and its workspace is studied in this paper.First,the mobility of the 4UPS-UPU parallel mechanism is analyzed based on the reciprocal screw theory,and the motion and constraint screw systems of the parallel mechanism are obtained.Then the inverse kinematics is derived by the closed-form kinematics chain.The boundary search method in the polar coordinate system is presented to analyze the constant-orientation workspace of the parallel mechanism.Finally,the influence factors relevant to the workspace,such as the structural parameters and kinematics parameters are analyzed in detail.The relationship between the workspace volume and different parameters are obtained.The conclusions can be used for parameters optimization and path planning of the parallel mechanism.展开更多
For the narrow workspace problem of the universal-prismatic-universal(UPU)parallel robotwith fixed orientation,a kind of multi-objective genetic algorithm is studied to optimize the robot’sworkspace.The concept of th...For the narrow workspace problem of the universal-prismatic-universal(UPU)parallel robotwith fixed orientation,a kind of multi-objective genetic algorithm is studied to optimize the robot’sworkspace.The concept of the effective workspace and its solution method are given.The effectiveworkspace height(EWH)and global condition number index(GCI)of Jacobi matrix are selected asthe optimized objective functions.Setting the robot in two different orientations,the geometric pa-rameters are optimized by the multi-objective genetic algorithm named non-dominated sorting geneticalgorithm II(NSGA-II),and a set of structural parameters is obtained.The optimization results areverified by four indicators with the robot’s moving platform at different orientations.The resultsshow that,after optimization,the fixed-orientation workspace volume,the effective workspace heightand the effective workspace volume increase by 32.4%,17.8%and 72.9%on average,respec-tively.GCI decreases by 6.8%on average.展开更多
The environmental psychology ofa workspace is a rich and diverse field of study that is growing fast and gaining popularity. The indoor environmental factors in workspaces should follow functional as well as behaviora...The environmental psychology ofa workspace is a rich and diverse field of study that is growing fast and gaining popularity. The indoor environmental factors in workspaces should follow functional as well as behavioral requirements as the spaces are designed as per the user＇s requirements, needs and aspirations. These play a major role in achieving behavioral impact on the user, as sense of well-being in the environment and physical comfort in the space enhances the productivity and efficiency of the user of the space. The slow and gradual importance of this issue in workspace design with Indian context, post occupancy evaluation can be adjudged as a permanent tool for improving indoor environment in buildings. Occupants should be used as a benchmark of evaluation, showing correlation of physical measurements and subjective parameters. It also suggests recommendations to improve quality of indoor environment in office buildings with analytical study, an important step in post occupancy evaluation. The objective of the paper is to inquire how people experience environmental psychology of the workspace as the determinants are efficiency, productivity and comfort. The success of any design depends upon the degree to which it creates an interface between the user and the environment.展开更多
Based on the D-H notation, kinematics model and inverse kinematics model of 6R industrial robots are established. Using graphical method, the boundary curve equations of the 6R industrial robot workspace are obtained....Based on the D-H notation, kinematics model and inverse kinematics model of 6R industrial robots are established. Using graphical method, the boundary curve equations of the 6R industrial robot workspace are obtained. Based on the prescribed workspace, the D-H parameter optimization method of 6R industrial robots is proposed. Using the genetic algorithm to determine the structural dimensions of a 6R robot, we make sure that its workspace can exactly contain the prescribed workspace. This method can be used to reduce the overall size of the robot, save materials and reduce the power consumption of the robot during its work time.展开更多
Redundant serial robot kinematic chains with seven axes are an extension of classical 6-axis ones. The structural synthesis of these structures is useful to provide a working basis, including for the promotion of new ...Redundant serial robot kinematic chains with seven axes are an extension of classical 6-axis ones. The structural synthesis of these structures is useful to provide a working basis, including for the promotion of new structures with 7 axes, besides some already existing and applied structures. This paper summarizes kinematic chain structures using a combinatorial method by listing all possible variants of the structures with 7 axes, obtained by adding a rotational or translational coupling, in a parallel or perpendicular position, against the guiding structure with 6 axes consisting of two distinct modules： positioning module （3 axes） and orientation module （3 axes）. Representation of proper workspaces can help the designer in choosing the structure with maximum functionality for a given application.展开更多
基金Ministerial Level Foundation(96J185 .1BQ0150) Fund for Reasearch on Doctoral Programs in Institutions of Higher Learning(1997000716)
文摘A new three dimensional simulation method is introduced to study the workspace of a 6 PSS (P denotes a prismatic kinematic pair, S denotes a spherical kinematic pair) parallel machine tool. This algorithm adopts the method of numerical analysis to investigate the boundary points in a series of sections which form the surface of the workspace. That is, to study such points that have the largest polar radius on a certain section in a system of polar coordinates according to conditions of constraint. The constraint conditions considered in the article include the maximum and minimum displacements of each dieblock, the maximum and minimum angles of oscillation in each hinge. By converting the constraint inequalities into constraint equations, the largest polar radius corresponding to every constraint condition can be evaluated and the minimum one is used to decide the boundary point. This algorithm greatly simplifies the computational process and can be used to analyze any section of the workspace. It provides a theoretical basis for the structural design of such a machine tool.
基金Supported by National Natural Science Foundation of China(Grant No.51221004)National Hi-tech Research and Development Program of China(863 Program,Grant No.2012AA040605)
文摘Although the parallel mechanisms have the advantages of high accuracy, velocity, stiffness, and payload capacity, the shortcomings of the space utilization and workspace limit the applications in the confined space. A novel 3 degrees of freedom spatial parallel manipulator 3-PSR-O（prismatic-spherical-revolute） is proposed, which possesses a compact architecture and extended workspace while maintaining the inherent advantages of the parallel mechanisms. The direct-inverse position, singularity and workspace are investigated. The mapping method is adopted in the position analysis, and the closed form solution is derived in the form of a six order equation. The singularity analysis of the mechanism is also carried out based on the geometrical constraints, including six singularity boundaries. A feature boundary, which is independent of the prismatic joints＇ stroke limit, is obtained by integrating the six singularity boundaries. According to the formation of the reachable workspace, a concept of basic workspace is also introduced and presented in the analytical way. By demarcating the basic workspace along the central height with the feature boundary, the reachable workspace can be derived and analyzed more efficiently. Finally, a comparative study on the space utilization between the 3-PSP parallel mechanism and the new mechanism is also presented. The area of feature boundary of the new mechanism is about 140% of the 3-PSP parallel mechanism, while its installation radius is only 1/2 of the 3-PSP parallel mechanism. The proposed parallel mechanism shows great space utilization, and is ideally suited for applications in confined space occasions such as immersion lithography, nano-imprint etc.
基金Supported by National Natural Science Foundation of China(Grant No.51535008).
文摘Current research on robotic dexterous hands mainly focuses on designing new finger and palm structures,as well as developing smarter control algorithms.Although the dimensional synthesis of dexterous hands with traditional rigid palms has been carried out,research on the dimensional synthesis of dexterous hands with metamorphic palms remains insufficient.This study investigated the dimensional synthesis of a palm of a novel metamorphic multi-fingered hand,and explored the geometric design for maximizing the precision manipulation workspace.Different indexes were used to value the workspace of the metamorphic hand,and the best proportions between the five links of the palm to obtain the optimal workspace of the metamorphic hand were explored.Based on the fixed total length of the palm member,four nondimensional design parameters that determine the size of the palm were introduced;through the discretization method,the influence of the four design parameters on the workspace of the metamorphic hand with full-actuated fingers and under-actuated fingers was analyzed.Based on the analysis of the metamorphic multi-fingered hand,the symmetrical structure of the palm was designed,resulting in the largest workspace of the multi-fingered hand,and proved that the metamorphic palm has a massive upgrade for the workspace of underactuated fingers.This research contributed to the dimensional synthesis of metamorphic dexterous hands,with practical significance for the design and optimization of novel metamorphic hands.
基金the National Key Research and Development Program(2016YFB1001200)the National Natural Science Foundation of China(61572055 and 61633004).
文摘A wearable force-feedback glove is a promising way to enhance the immersive sensation when a user interacts with virtual objects in virtual reality scenarios.Design challenges for such a glove include allowing a large fingertip workspace,providing a desired force sensation when simulating both free-and constrained-space interactions,and ensuring a lightweight structure.In this paper,we present a forcefeedback glove using a pneumatically actuated mechanism mounted on the dorsal side of the user’s hand.By means of a triple kinematic paired link with a curved sliding slot,a hybrid cam-linkage mechanism is proposed to transmit the resistance from the pneumatic piston rod to the fingertip.In order to obtain a large normal component of the feedback force on the user’s fingertip,the profile of the sliding slot was synthesized through an analysis of the force equilibrium on the triple kinematic paired link.A prototype five-fingered glove with a mass of 245 g was developed,and a wearable force-measurement system was constructed to permit the quantitative evaluation of the interaction performance in both free and constrained space.The experimental results confirm that the glove can achieve an average resistance of less than 0.1 N in free-space simulation and a maximum fingertip force of 4 N in constrained-space simulation.The experiment further confirms that this glove permits the finger to move freely to simulate typical grasping gestures.
基金National Natural Science Foundation of China(Grant Nos.51775052,52175019)Beijing Municipal Natural Science Foundation of China(Grant No.21C10109)Beijing Municipal Key Laboratory of Space-ground Interconnection and Convergence of China.
文摘With the increasingly more extensive application of the medical surgical robot in the clinic,higher requirements have been put forward for medical robots.The bone-attached robot,a popular orthopedic robot in recent years,has a tendency of miniaturization and refinement.Thus,a bone-attached parallel manipulator(PM)based on 6-UCU(universalcylindrical-universal)configuration is proposed,which is characterized by small volume,compact structure,high precision and six-dimensional force feedback.To optimize the structure and make it more compact,the workspace of the 6-UCU PM is analyzed based on the analysis of three kinds of constraint,and workspace model is established through spherical coordinate search method.This study also analyzes the influence of structural parameters on workspace,which may contribute to improving the efficiency of design and ensuring small-sized robots possess relatively large workspace.Moreover,to improve the motion accuracy,an error modeling method is developed based on the structure of 6-UCU PMs.According to this established error model,the output pose error curves are drawn using MATLAB software when the structure parameters change,and the influence of the structure and pose parameters change on the output pose error of PMs is analyzed.The proposed research provides the instruction to design and analysis of small PMs such as bone-attached robots.
文摘To determine workspace and relationship between the workspace and geometry of parallel manipulator is important for optimum design of parallel manipulators. In this paper, the workspace and the relationship between the workspace and the geometry of 3-UPU parallel manipulators with pure translation are investigated. Geometric and non-geometric constraints are defined and taken account of in determining the workspace of the translation 3-UPU manipulators. A direct average condition number is used as the global performance index of the workspace. This research shows that there exists an optimal value of the direct average condition number favorable for a good design of parallel mechanisms. The results presented in this paper are useful for the optimum design of 3-UPU parallel manipulators.
基金Supported by National Basic Research Program of China(973 Program,Grant No.2013CB035501)
文摘Researchers seldom study optimum design of a six-degree-of-freedom（DOF） parallel manipulator with three legs based upon the given workspace.An optimal design method of a novel three-leg six-DOF parallel manipulator（TLPM） is presented.The mechanical structure of this robot is introduced,with this structure the kinematic constrain equations is decoupled.Analytical solutions of the forward kinematics are worked out,one configuration of this robot,including position and orientation of the end-effector are graphically displayed.Then,on the basis of several extreme positions of the kinematic performances,the task workspace is given.An algorithm of optimal designing is introduced to find the smallest dimensional parameters of the proposed robot.Examples illustrate the design results,and a design stability index is introduced,which ensures that the robot remains a safe distance from the boundary of sits actual workspace.Finally,one prototype of the robot is developed based on this method.This method can easily find appropriate kinematic parameters that can size a robot having the smallest workspace enclosing a predefined task workspace.It improves the design efficiency,ensures that the robot has a small mechanical size possesses a large given workspace volume,and meets the lightweight design requirements.
基金Supported by the Key Research and Development Project of Yangzhou--Industry Preview and Key Projects(No.YZ2015011)
文摘In order to meet the polishing requirement of faucets and other products,a novel multi-station rotary polishing robot is designed,which is a PPPR + RR type of degree of freedom( DOF) distribution structure,and is similar to dual-arm robot. Forward and inverse kinematic analysis is carried out by robot modeling. In order to make this robot structure more compact,first of all,X,Y and Z three moving degrees of freedom( DOF) limit stroke polishing need is calculated by using an artificial fish swarm algorithm,which analyzes dexterous workspace of this robot. Then,on the basis of the above analysis,the three DOF stroke is optimized. Simulation and polishing experimental results verify that this polishing robot with optimized stroke parameters can meet the polishing needs of faucets and other bathroom pieces.
基金Supported by the Ministerial Level Advanced Research Foundation (870102056)
文摘An optimized workspace calculation method is proposed for parallel stabilized platform testing systems.This method refines the searched space progressively in order to approach the boundary of the workspace from both the inside and the outside of it.The orientation density is defined and used as an evaluation index to calculate the orientation workspace.The algorithm of the orientation density is embedded into the computer program of the workspace calculation.Then the workspaces of the testing system are solved.In the solution,the orientation density is regarded as a discrete function of the reachable workspace.As a result,the reachable workspace and the orientation workspace are represented in the same multidimensional graphs.Finally the useful workspace of the testing system is determined based on these results.This case study indicates that the calculation efficiency is enhanced by adopting the optimized method and the practicability of workspace study is improved by proposing the orientation density.
文摘We present a mathematical method for acceleration workspace analysis of cooperating multi-finger robot systems using a model of point-contact with friction. A new unified formulation from dynamic equations of cooperating multi-finger robots is derived considering the force and acceleration relationships between the fingers and the object to be handled. From the dynamic equation, maximum translational and rotational acceleration bounds of an object are calculated under given constraints of contact conditions, configurations of fingers, and bounds on the torques of joint actuators for each finger. Here, the rotational acceleration bounds can be applied as an important manipulability index when the multi-finger robot grasps an object. To verify the proposed method, we used a set of case studies with a simple multi-finger mechanism system. The achievable acceleration boundary in task space can be obtained successfully with the proposed method and the acceleration boundary depends on the configurations of fingers.
基金the National Natural Science Foundation of China(Grant No.60675051)the Scientific Research Foundation of Heilongjiang Province for the Feeturned Overseas Chinese Scholars
文摘The cooperative motion planning of nonholonomic wheeled mobile manipulators （WMM） with kinematic redundaney in the constrained workspace was studied. A trajectory planning method combining the probabilistic planning and the solving of inverse kinematic equations was presented. First, the probabilistie planning method was used to determine the guide configurations; then the switching objective function was defined and the path of the end-effector was constructed based on these guide configurations ; finally, the inverse kinematic equations of the WMM were solved using the gradient projection method, and the obstacle avoidance trajectory for joints of the WMM was obtained. Simulation results were given to demonstrate the effectiveness of the proposed method.
文摘Presents the detailed algorithm established for determination of workspace for a 3-DOF coordinate measuring machine using parallel link mechanism by constructing the inverse kinematic model first and then reviewing the physical and kinematical constraints from the structural characteristics of the parallel link mechanism, and discusses the actual geometries of workspace and the factors having effect on workspace through computer simulation thereby providing necessary theoretical basis for the research and development of coordinate measuring machines using parallel link mechanism.
基金Supported by the National High Technology Research and Development Programme of China(No.SS2012AA041604)
文摘One of the key issues for parallel mechanism is the kinematic characteristics,especially the workspace which varies with configuration parameters.A kind of 4UPS-UPU parallel mechanism is designed and its workspace is studied in this paper.First,the mobility of the 4UPS-UPU parallel mechanism is analyzed based on the reciprocal screw theory,and the motion and constraint screw systems of the parallel mechanism are obtained.Then the inverse kinematics is derived by the closed-form kinematics chain.The boundary search method in the polar coordinate system is presented to analyze the constant-orientation workspace of the parallel mechanism.Finally,the influence factors relevant to the workspace,such as the structural parameters and kinematics parameters are analyzed in detail.The relationship between the workspace volume and different parameters are obtained.The conclusions can be used for parameters optimization and path planning of the parallel mechanism.
基金Supported by the National Key R&D Program of China(No.2020YFB1313803)。
文摘For the narrow workspace problem of the universal-prismatic-universal(UPU)parallel robotwith fixed orientation,a kind of multi-objective genetic algorithm is studied to optimize the robot’sworkspace.The concept of the effective workspace and its solution method are given.The effectiveworkspace height(EWH)and global condition number index(GCI)of Jacobi matrix are selected asthe optimized objective functions.Setting the robot in two different orientations,the geometric pa-rameters are optimized by the multi-objective genetic algorithm named non-dominated sorting geneticalgorithm II(NSGA-II),and a set of structural parameters is obtained.The optimization results areverified by four indicators with the robot’s moving platform at different orientations.The resultsshow that,after optimization,the fixed-orientation workspace volume,the effective workspace heightand the effective workspace volume increase by 32.4%,17.8%and 72.9%on average,respec-tively.GCI decreases by 6.8%on average.
文摘The environmental psychology ofa workspace is a rich and diverse field of study that is growing fast and gaining popularity. The indoor environmental factors in workspaces should follow functional as well as behavioral requirements as the spaces are designed as per the user＇s requirements, needs and aspirations. These play a major role in achieving behavioral impact on the user, as sense of well-being in the environment and physical comfort in the space enhances the productivity and efficiency of the user of the space. The slow and gradual importance of this issue in workspace design with Indian context, post occupancy evaluation can be adjudged as a permanent tool for improving indoor environment in buildings. Occupants should be used as a benchmark of evaluation, showing correlation of physical measurements and subjective parameters. It also suggests recommendations to improve quality of indoor environment in office buildings with analytical study, an important step in post occupancy evaluation. The objective of the paper is to inquire how people experience environmental psychology of the workspace as the determinants are efficiency, productivity and comfort. The success of any design depends upon the degree to which it creates an interface between the user and the environment.
文摘Based on the D-H notation, kinematics model and inverse kinematics model of 6R industrial robots are established. Using graphical method, the boundary curve equations of the 6R industrial robot workspace are obtained. Based on the prescribed workspace, the D-H parameter optimization method of 6R industrial robots is proposed. Using the genetic algorithm to determine the structural dimensions of a 6R robot, we make sure that its workspace can exactly contain the prescribed workspace. This method can be used to reduce the overall size of the robot, save materials and reduce the power consumption of the robot during its work time.
文摘Redundant serial robot kinematic chains with seven axes are an extension of classical 6-axis ones. The structural synthesis of these structures is useful to provide a working basis, including for the promotion of new structures with 7 axes, besides some already existing and applied structures. This paper summarizes kinematic chain structures using a combinatorial method by listing all possible variants of the structures with 7 axes, obtained by adding a rotational or translational coupling, in a parallel or perpendicular position, against the guiding structure with 6 axes consisting of two distinct modules： positioning module （3 axes） and orientation module （3 axes）. Representation of proper workspaces can help the designer in choosing the structure with maximum functionality for a given application.
