Dining lampblack as a source of atmospheric pollution,urban residents had to spend a lot of economic costs all year round to solve its impact.However,traditional treatment methods often carry the risk of secondary pol...Dining lampblack as a source of atmospheric pollution,urban residents had to spend a lot of economic costs all year round to solve its impact.However,traditional treatment methods often carry the risk of secondary pollution.The use of phase change absorption solvent(PCAS)controlled by CO_(2)can effectively absorb the oily components in dining lampblack,and smoothly avoid the generation of secondary pollutants and squandering of resources.The reversibility of PCASs under CO_(2)control was explained by pH changes and macroscopic visualizations.The absorption effects of favorable absorbents and PCASs on dining lampblack were compared and analyzed.The fatty acid(FA)in the oil absorption mixture was desorbed by interacting with D230.The results of GC/MS analysis on the oil components separated by desorption showed that the desorption of PCASs was effective for these refractory oil components.FAs can be enriched and applied to the subsequent dining lampblack treatment link to realize the waste recycling.In addition,the absorption and desorption of oily components by PCASs were combined with the CO_(2)-controlled phase transformation of PCASs itself to achieve the absorption circulation of treating dining lampblack by using PCASs.展开更多
In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg,...In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg, Ni, Pb and Zn） were analyzed. The results indicated that heavy metals pollution in agricultural soil was commonly existed in the study areas, and the soil was slightly contaminated by Pb but was moderately or critically polluted by Cd and Cu. However, the carcinogenic risk and non-carcinogenic risk status by heavy metals pollution were beyond acceptable levels, and soil remediation was quite necessary. After some investigations of bioremediation, we found that saponin as washing agent could highly strenqthen the behavior of heavy metals desorption from soil ,which had a good prospect of engineering practice.展开更多
Based on the basic supply chain model,the status quo of waste recycling in China is examined by analyzing and comparing the changes in the waste recycling network and the problems of siting in relation to China’s was...Based on the basic supply chain model,the status quo of waste recycling in China is examined by analyzing and comparing the changes in the waste recycling network and the problems of siting in relation to China’s waste disposal system.展开更多
This investigation is focused on conducting a thorough analysis of Municipal Solid Waste Management (MSWM). MSWM encompasses a range of interdisciplinary measures that govern the various stages involved in managing un...This investigation is focused on conducting a thorough analysis of Municipal Solid Waste Management (MSWM). MSWM encompasses a range of interdisciplinary measures that govern the various stages involved in managing unwanted or non-utilizable solid materials, commonly known as rubbish, trash, junk, refuse, and garbage. These stages include generation, storage, collection, recycling, transportation, handling, disposal, and monitoring. The waste materials mentioned in this context exhibit a wide range of items, such as organic waste from food and vegetables, paper, plastic, polyethylene, iron, tin cans, deceased animals, byproducts from demolition activities, manure, and various other discarded materials. This study aims to provide insights into the possibilities of enhancing solid waste management in the Farmgate area of Dhaka North City Corporation (DNCC). To accomplish this objective, the research examines the conventional waste management methods employed in this area. It conducts extensive field surveys, collecting valuable data through interviews with local residents and key individuals involved in waste management, such as waste collectors, dealers, intermediate dealers, recyclers, and shopkeepers. The results indicate that significant amounts of distinct waste categories are produced daily. These include food and vegetable waste, which amount to 52.1 tons/day;polythene and plastic, which total 4.5 tons/day;metal and tin-can waste, which amounts to 1.4 tons/day;and paper waste, which totals 5.9 tons/day. This study highlights the significance of promoting environmental consciousness to effectively shape the attitudes of urban residents toward waste disposal and management. It emphasizes the need for collaboration between authorities and researchers to improve the current waste management system.展开更多
This paper introduces an intelligent waste recycling automatic classification system,which integrates sensors,image recognition,and robotic arms to achieve automatic identification and classification of waste.The syst...This paper introduces an intelligent waste recycling automatic classification system,which integrates sensors,image recognition,and robotic arms to achieve automatic identification and classification of waste.The system monitors the composition and properties of waste in real time through sensors,and uses image recognition technology for precise classification,and the robotic arm is responsible for grabbing and disposing.The design and implementation of the system have important practical significance and application value,and help promote the popularization and standardization of waste classification.This paper details the system s architecture,module division,sensors and recognition technology,robotic arm and grabbing technology,data processing and control system,and testing and optimization process.Experimental results show that the system has efficient waste recycling efficiency and accuracy in practical applications,bringing new development opportunities to the waste recycling industry.展开更多
Objective To evaluate the environmental quality of Guiyu, Guangdong impacted by the electronic waste recycling industry. Methods The surface water, ground water and sediment samples taken separately from two sites tha...Objective To evaluate the environmental quality of Guiyu, Guangdong impacted by the electronic waste recycling industry. Methods The surface water, ground water and sediment samples taken separately from two sites that recycle E-wastes and other rubbish relevant to the E-waste recycling, and an agricultural area, were analyzed, and the data were used to evaluate the impact of E-waste recycling on the environmental quality of Guiyu based on environmental quality standards in China. Results The concentrations of lead and iron in the surface water samples significantly different in the three locations. The maximum value of lead in the first site was 8 times higher than the threshold of environmental quality standards for surface water. The concentration of iron in polluted sample was 22 times that of the background sample. Manganese and iron also showed a significant difference in ground water samples between the three sites. The amount of iron was 22 times that of the threshold of the quality standard for ground water, and 120 times that of the background sample. Moreover, the results of all the eight heavy metals showed significant differences among the sediment samples. The concentrations of copper, cadmium, nickel, and lead in the polluted samples were above the median benchmarks of National Oceanic and Atmospheric Administration （NOAA）. The copper concentration of 2670 mg/kg was 10 times that of the median benchmark. Conclusion E-waste recycling has led to the severe pollution Guiyu.展开更多
Waste pollution is a significant environmental problem worldwide.With the continuous improvement in the living standards of the population and increasing richness of the consumption structure,the amount of domestic wa...Waste pollution is a significant environmental problem worldwide.With the continuous improvement in the living standards of the population and increasing richness of the consumption structure,the amount of domestic waste generated has increased dramatically,and there is an urgent need for further treatment.The rapid development of artificial intelligence has provided an effective solution for automated waste classification.However,the high computational power and complexity of algorithms make convolutional neural networks unsuitable for real-time embedded applications.In this paper,we propose a lightweight network architecture called Focus-RCNet,designed with reference to the sandglass structure of MobileNetV2,which uses deeply separable convolution to extract features from images.The Focus module is introduced to the field of recyclable waste image classification to reduce the dimensionality of features while retaining relevant information.To make the model focus more on waste image features while keeping the number of parameters small,we introduce the SimAM attention mechanism.In addition,knowledge distillation was used to further compress the number of parameters in the model.By training and testing on the TrashNet dataset,the Focus-RCNet model not only achieved an accuracy of 92%but also showed high deployment mobility.展开更多
To realize the comprehensive utilization of coal-fired industrial solid wastes, a novel high-strength board was prepared from calcium silicate slag, fly ash, and flue gas desulfurization(FGD) gypsum. The changes in mi...To realize the comprehensive utilization of coal-fired industrial solid wastes, a novel high-strength board was prepared from calcium silicate slag, fly ash, and flue gas desulfurization(FGD) gypsum. The changes in mineral phases, chemical structure, and morphology during hydration were investigated by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), and scanning electron microscopy(SEM). A traditional board made from quartz and lime was prepared as a reference. The novel board not only consumes a lot of solid wastes, but also meets the strength requirement of the class-five calcium silicate board according to the Chinese Standard JC/T 564.2—2008. Microanalysis showed that hydrated calcium silicate gel(C-S-H(I)), ettringite, tobermorite, and xonotlite were successively generated in the novel board by synergistic hydration of the mixed solid wastes. The board strength was improved by the formation of tobermorite and xonotlite but decreased by unhydrated quartz. It was demonstrated that quartz was not completely hydrated in the traditional board. As a result, the flexural strength of the traditional board was much lower than that of the novel board.展开更多
Massive waste aluminum scraps produced from the spent aluminum products have high electron capacity and can be recycled as an attractive alternative to materials based on zerovalent iron(Fe^(0))for the removal of oxid...Massive waste aluminum scraps produced from the spent aluminum products have high electron capacity and can be recycled as an attractive alternative to materials based on zerovalent iron(Fe^(0))for the removal of oxidative contaminants from wastewater.This study thus proposed an approach to fabricate micron-sized sulfidated zero-valent iron-aluminum particles(S-Al^(0)@Fe^(0))with high reactivity,electron selectivity and capacity using recycled waste aluminum scraps.S-Al^(0)@Fe^(0)with a three-layer structure contained zero-valent aluminum(Al^(0))core,Fe^(0) middle layer and iron sulfide(FeS)shell.The rates of chromate(Cr(Ⅵ))removal by S-Al^(0)@Fe^(0)at pH 5.0-9.0 were 1.6-5.9 times greater than that by sulfidated zero-valent iron(S-Fe^(0)).The Cr(Ⅵ)removal capacity of S-Al^(0)@Fe^(0)was 8.2-,11.3-and 46.9-fold greater than those of S-Fe0,zero-valent iron-aluminum(Al^(0)-Fe^(0))and Fe^(0),respectively.The chemical cost of S-Al^(0)@Fe^(0) for the equivalent Cr(Ⅵ)removal was 78.5%lower than that of S-Fe^(0).Negligible release of soluble aluminum during the Cr(Ⅵ)removal was observed.The significant enhancement in the reactivity and capacity of S-Al^(0)@Fe^(0)was partially ascribed to the higher reactivity and electron density of the Al0core than Fe^(0).More importantly,S-Al^(0)@Fe^(0) served as an electric cell to harness the persistent and selective electron transfer from the Al^(0)-Fe^(0) core to Cr(Ⅵ)at the surface via coupling Fe^(0)-Fe^(2+)-Fe^(3+)redox cycles,resulting in a higher electron utilization efficiency.Therefore,S-Al^(0)@Fe^(0) fabricated using recycled waste aluminum scraps can be a cost-effective and environmentally-friendly alternative to S-Fe^(0) for the enhanced removal of oxidative contaminants in industrial wastewater.展开更多
In a beamhouse,liming plays a key role in the removal of hair/wool and epidermis,but problems are created when waste liming sludge is discharged to the environment.The treatment of tannery wastewater is another major ...In a beamhouse,liming plays a key role in the removal of hair/wool and epidermis,but problems are created when waste liming sludge is discharged to the environment.The treatment of tannery wastewater is another major challenge to the industry.In this study,thermally-activated biochars derived from liming sludge were studied for their effective adsorption of chromium(Cr)from the tannery wastewater.The thermally activated biochars(B500,B550,B600,and B650)were prepared at different temperatures from the liming sludge.Their characteristics before and after the treatment were investigated using Fourier transform infrared spectroscopy,energy dispersive X-ray spectroscopy,Bru-nauer-Emmett-Teller,and scanning electron microscopy analyses.The related functional groups(C-H,O-H,C-N,and=C-O)and chromium adsorption capacity were determined according to the surface morphology,element contents(C,O,Ca,Na,Al,Mg,and Si),surface area(5.8-9.2 m^(2)/g),pore size(5.22-5.53 nm),and particle size(652-1034 nm)of the experimental biochars.The biochar originated at 600°C from the tannery liming sludge(B600)had a greater surface area with a chromium adsorption capacity of 99.8%in comparison to B500,B550,and B650 biochars.This study developed an innovative way of utilizing liming sludge waste to minimize the pollution load and wastewater treatment cost in the tannery industry.展开更多
The increasing consumption of plastics inevitably results in increasing amounts of waste plastics. Because of their long degradation periods, these wastes negatively affect the natural environment. Numerous studies ha...The increasing consumption of plastics inevitably results in increasing amounts of waste plastics. Because of their long degradation periods, these wastes negatively affect the natural environment. Numerous studies have been conducted to recycle and eliminate waste plastics. The potential for recycling waste plastics in the iron and steel industry has been underestimated; the high C and H contents of plastics may make them suitable as alternative reductants in the reduction process of iron ore. This study aims to substitute plastic wastes for coal in reduction melting process and to investigate their performance during reduction at high temperature. We used a common type of waste plastic, polyethylene terephthalate （PET）, because of its high carbon and hydrogen contents. Composite pellets containing PET wastes, coke, and magnetite iron ore were reduced at selected temperatures of 1400 and 1450℃ for reduction time from 2 to 10 min to investigate the reduction melting behavior of these pellets. The results showed that an increased temperature and reduction time increased the reduction ratio of the pellets. The optimum experimental conditions for obtaining metallic iron （iron nuggets） were reduction at 1450℃ for 10 min using composite pellets containing 60% PET and 40% coke.展开更多
In this article, based on the analysis of the current environmental situation in Russia and other countries, as well as of the problem of recycling plastic waste in the Russian Federation （RF）, the authors clearly s...In this article, based on the analysis of the current environmental situation in Russia and other countries, as well as of the problem of recycling plastic waste in the Russian Federation （RF）, the authors clearly show the effectiveness of investments in the processing of polymer debris on the example of polyethylene terephthalate （PET） waste （granulates, flakes）. In the frame of case study of social and environmental investment project on creating enterprise that will engage in collection, recycling, and sale of the consumer PET packaging in Russia, the authors demonstrate the economic feasibility of the creation of such kind of enterprises taking into account market conditions and the features of the existing system of taxation in Russia. The realization of the project will also help in solving environmental and social problems of large cities, in particular, will create more jobs （in terms of 6% of unemployment rate in the country）. The study also identifies the main obstacles in the way of waste recycling in Russia, and the recommendations for improvement of normative base of the industry are given.展开更多
The main driver for recycling cable wastes is the high value of the conducting metal, while the plastic with its lower value is often neglected. New improved cable plastic recycling routes can provide both economic an...The main driver for recycling cable wastes is the high value of the conducting metal, while the plastic with its lower value is often neglected. New improved cable plastic recycling routes can provide both economic and environmental incentive to cable producers for moving up the “cable plastic waste ladder”. Cradle-to-gate life cycle assessment, LCA, of the waste management of the cable scrap is suggested and explained as a method to analyze the pros and cons of different cable scrap recycling options at hand. Economic and environmental data about different recycling processes and other relevant processes and materials are given. Cable producers can use this data and method to assess the way they deal with the cable plastic waste today and compare it with available alternatives and thus illuminate the improvement potential of recycling cable plastic waste both in an environmental and in an economic sense. The methodology applied consists of: cradle-to-gate LCA for waste material to a recycled material (recyclate);quantifying the climate impact for each step on the waste ladder for the specific waste material;the use of economic and climate impact data in parallel;climate impact presented as a span to portray the insecurities related to which material the waste will replace;and possibilities for do-it-yourself calculations. Potentially, the methodology can be useful also for other waste materials in the future.展开更多
Oily cold rolling mill （CRM） sludge is one of metallurgical industry solid wastes. The recycle of these wastes can not only protect the environment but also permit their reutilization. In this research, a new proces...Oily cold rolling mill （CRM） sludge is one of metallurgical industry solid wastes. The recycle of these wastes can not only protect the environment but also permit their reutilization. In this research, a new process of ＂hydrometallurgical treatment ＋ hydrothermal synthesis＂ was investigated for the combined recovery of iron and organic materials from oily CRM sludge. Hydrometallurgical treatment, mainly including acid leaching, centrifugal separation, neutralization reaction, oxidizing, and preparation of hydrothermal reaction precursor, was first utilized for processing the sludge. Then, micaceous iron oxide （MIO） pigment powders were prepared through hydrothermal reaction of the obtained precursor in alkaline media. The separated organic materials can be used for fuel or chemical feedstock. The quality of the prepared MIO pigments is in accordance with the standards of MIO pigments for paints （ISO 10601-2007）. This clean, effective, and economical technology offers a new way to recycle oily CRM sludge.展开更多
The purpose of this study is to analyze the household waste reduction effect of sorted collection of recyclable waste in Japan using a panel data analysis, which considers time-series and cross-section data simultaneo...The purpose of this study is to analyze the household waste reduction effect of sorted collection of recyclable waste in Japan using a panel data analysis, which considers time-series and cross-section data simultaneously. Also, the study shows the effect of the type of sorted items on the quantity of household waste disposed. We used the data attained from 103 cities recorded over three years, and applied the quantity of total waste disposed, the quantity of combustible waste, the quantity of other waste （waste excluding combustible and recyclable waste）, and the quantity of combustible plus other waste as objective variables, respectively, in the models. The result suggests that when the number of sorted items is increased marginally, the quantity of household waste decreases by about 0.5%-3.3% or 1.28-4.17 grams per capita per day. In addition, it is shown that sorting out white trays is effective in reducing the quantity of combustible waste. Sorting out paper containers and packages is also effective in reducing the quantity of other waste and combustible plus other waste.展开更多
This study was designed to evaluate the sensory quality indices, freshness assessment and safety of eating Nile tilapia fed recycled food waste materials [food industry waste （FIW） and soy sauce waste （SSW）] for 3...This study was designed to evaluate the sensory quality indices, freshness assessment and safety of eating Nile tilapia fed recycled food waste materials [food industry waste （FIW） and soy sauce waste （SSW）] for 32 weeks using K values, IMP content and microbial viable cell count. Five experimental diets were formulated at 0% and 20%-22% inclusion level of recycled food wastes. The diets were designated as D 1： 0% of recycled food waste, D2： 20% inclusion of FIW, D3： 20% inclusion of FIW and SSW, D4： 20% inclusion of FIW and tryptophan, and D5： 22% inclusion of SSW. The result from the body composition shows that D I had higher carcass protein, while D3 had the highest lipid content and there was no significant difference in the carcass moisture and ash contents among all treatments. The results of microbial viable cell counts showed that no significant differences were observed among the dietary treatments and all the fish fed experimental diets still remained fresh four days after refrigerated storage at 5 ~C. In addition, no significant differences were noted among the K value concentrations of all the fish fed the experimental diets. From the result of this study, we concluded that using 20% inclusion of recycled food waste materials （FIW and SSW） in the diet of tilapia had no negative effect on the flesh of the fish; hence, recycled food waste could be a good alternative ingredient to aquaculture.展开更多
Recently great effort s have been focused on designing high-performance microwave absorbers using sustainable biomass resources,but there remains a lack of green and efficient fabrication methods.Herein,inspired by na...Recently great effort s have been focused on designing high-performance microwave absorbers using sustainable biomass resources,but there remains a lack of green and efficient fabrication methods.Herein,inspired by natural porous character of biomass waste,we demonstrated a green one-step route to convert waste coffee grounds into porous C/Fe hybrids,and further explored their potential applications for broadband and high-efficiency microwave absorption.In this design,the WCG-20-750(incorporated 20 wt%Fe(C_(5)H_(7)O_(2))_(3)catalyst and carbonized at 750℃)exhibited porous microstructure with the highest char yield of 55.45 wt%.Furthermore,the as-prepared C/Fe hybrids from WCG-20-750 displayed excellent microwave absorption performances.Typically,the minimum reflection loss(RL_(min))reached to-52.86 dB and the widest effective absorption bandwidth(EAB)was 6.40 GHz at the thickness of 3.0 mm.This work provides an economically viable and environmentally friendly strategy to convert biomass wastes into value-added microwave absorbers,ultimately making contributions to the upcycling of renewable biomass resources and the fostering of sustainable environment.展开更多
The filler-bitumen interaction mechanism is one of the most essential phases for comprehending the asphalt mixture's performance.However,despite numerous studies,in-depth knowledge of filler-bitumen reciprocity at...The filler-bitumen interaction mechanism is one of the most essential phases for comprehending the asphalt mixture's performance.However,despite numerous studies,in-depth knowledge of filler-bitumen reciprocity at a microscale level is yet to be ascertained.The goal of this research is to gain a better understanding of the fillerbitumen microscale interaction in terms of the synergy and coaction between the physicochemical and rheological performance of mastics due to filler inclusions.The rheological properties of two sustainable mastics,dolomite powder(DP)and lime kiln dust(LKD),together with a neat PEN 60/70 binder,were analysed based on a temperature sweep at elevated temperature conditions.Meanwhile,frequency sweep and multiple stress creep recovery(MSCR)tests were also conducted at pavement serviceability temperature using the dynamic shear rheometer(DSR).Physicochemical tests using a scanning electron microscope(SEM)and energy dispersive X-rays(EDX)were conducted to analyse the impact of parameters such as particle shape,grain size,texture,and chemical compositions.The DSR test results showcased how the incorporation of fillers in asphalt binder considerably improved the performance of the binder in terms of rutting and fatigue.Likewise,its strain and nonrecoverable compliance parameters were substantially reduced at higher filler and binder concentrations.Physical filler attributes of low rigden voids(R.V),high fineness modulus(FM),and high specific surface area(SSA)led to greater interfacial stiffness and elasticity in LKD mastics compared to DP mastics at different loading frequencies and temperature levels.The SEM/EDX results also indicated that the elemental calcium and carbon composition of each filler component,together with its grain morphology,strongly influenced its rheological performance.展开更多
The green disposal of tailings solid waste is a problem to be solved in mine production.Cemented tailings filling stoping method can realize the dual goals of solid waste resource utilization and mined-out area reduct...The green disposal of tailings solid waste is a problem to be solved in mine production.Cemented tailings filling stoping method can realize the dual goals of solid waste resource utilization and mined-out area reduction.However,the volume of the mined-out area of the open-pit method is larger than the filling capacity,resulting in the complex stratification of the underground backfill,and the strength of the backfill cannot meet the requirements.In this paper,according to the delamination situation,the specimens of horizontal and inclination angle layered cemented tailings backfill(LCTB)is made for a uniaxial compression test,and the failure process of delamination backfill is reduced by PFC.The results show that the corresponding reduction factorφof horizontal LCTB is 0.560–0.932,and the correspondingφvalue of inclination angle LCTB is 0.338–0.772.The failure mode of backfill in different layers is mainly manifested as a tensile failure.The PFC numerical simulation results are consistent with laboratory test results,which verifies the correctness of backfill failure.The research results provide a reliable theoretical basis for the strength design of backfill in goaf,which is of great significance for solid waste utilization and environmental protection.展开更多
In order to improve the comprehensive utilization rate of highfines sand(HFS)produced by the mine,full solid waste shotcrete(HFS-BFRS)was prepared with HFS asfine aggregate in cooperation with basaltfiber(BF).The strengt...In order to improve the comprehensive utilization rate of highfines sand(HFS)produced by the mine,full solid waste shotcrete(HFS-BFRS)was prepared with HFS asfine aggregate in cooperation with basaltfiber(BF).The strength growth characteristics of HFS-BFRS were analyzed.And thefitting equation of compressive strength growth characteristics of HFS-BFRS under the synergistic effect of multiple factors was given.And based on the orthogonal experimental method,the effects on the compressive strength,splitting tensile strength andflex-ural strength of HFS-BFRS under the action of different levels of influencing factors were investigated.The effect of three factors on the mechanical properties of HFS-BFRS,3,and 28 d,respectively,was revealed by choosing the colloidal sand ratio(C/H),basaltfiber volume fraction(BF Vol)and naphthalene high-efficiency water reducing agent(FDN)as the design variables,combined with indoor tests and theoretical analysis.The results show that the sensitivity of the three factors on compressive strength andflexural strength is C/H>FDN>BF Vol,and split-ting tensile strength is BF Vol>FDN>C/H.Finally,thefitting ratio of HFS-BFRS was optimized by the factor index method,and the rationality was verified by thefield test.For thefluidity of HFS-BFRS,the slump can be improved by 139%under the action of 1.2%FDN,which guarantees the pump-ability of HFS-BFRS.展开更多
基金supported by the Chengdu Science and Technology Project of the Chengdu Bureau of Science and Technology(2021-YF05-00194-SN)the Foundation of Department of Science and Technology of Sichuan Province(2022NSFSC0203)。
文摘Dining lampblack as a source of atmospheric pollution,urban residents had to spend a lot of economic costs all year round to solve its impact.However,traditional treatment methods often carry the risk of secondary pollution.The use of phase change absorption solvent(PCAS)controlled by CO_(2)can effectively absorb the oily components in dining lampblack,and smoothly avoid the generation of secondary pollutants and squandering of resources.The reversibility of PCASs under CO_(2)control was explained by pH changes and macroscopic visualizations.The absorption effects of favorable absorbents and PCASs on dining lampblack were compared and analyzed.The fatty acid(FA)in the oil absorption mixture was desorbed by interacting with D230.The results of GC/MS analysis on the oil components separated by desorption showed that the desorption of PCASs was effective for these refractory oil components.FAs can be enriched and applied to the subsequent dining lampblack treatment link to realize the waste recycling.In addition,the absorption and desorption of oily components by PCASs were combined with the CO_(2)-controlled phase transformation of PCASs itself to achieve the absorption circulation of treating dining lampblack by using PCASs.
基金Supported by Environmental Protection Technology Program in Zhejiang Province,China(2013B017)Taizhou Municipal Science and Technology Project,China(121ky07)
文摘In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg, Ni, Pb and Zn） were analyzed. The results indicated that heavy metals pollution in agricultural soil was commonly existed in the study areas, and the soil was slightly contaminated by Pb but was moderately or critically polluted by Cd and Cu. However, the carcinogenic risk and non-carcinogenic risk status by heavy metals pollution were beyond acceptable levels, and soil remediation was quite necessary. After some investigations of bioremediation, we found that saponin as washing agent could highly strenqthen the behavior of heavy metals desorption from soil ,which had a good prospect of engineering practice.
文摘Based on the basic supply chain model,the status quo of waste recycling in China is examined by analyzing and comparing the changes in the waste recycling network and the problems of siting in relation to China’s waste disposal system.
文摘This investigation is focused on conducting a thorough analysis of Municipal Solid Waste Management (MSWM). MSWM encompasses a range of interdisciplinary measures that govern the various stages involved in managing unwanted or non-utilizable solid materials, commonly known as rubbish, trash, junk, refuse, and garbage. These stages include generation, storage, collection, recycling, transportation, handling, disposal, and monitoring. The waste materials mentioned in this context exhibit a wide range of items, such as organic waste from food and vegetables, paper, plastic, polyethylene, iron, tin cans, deceased animals, byproducts from demolition activities, manure, and various other discarded materials. This study aims to provide insights into the possibilities of enhancing solid waste management in the Farmgate area of Dhaka North City Corporation (DNCC). To accomplish this objective, the research examines the conventional waste management methods employed in this area. It conducts extensive field surveys, collecting valuable data through interviews with local residents and key individuals involved in waste management, such as waste collectors, dealers, intermediate dealers, recyclers, and shopkeepers. The results indicate that significant amounts of distinct waste categories are produced daily. These include food and vegetable waste, which amount to 52.1 tons/day;polythene and plastic, which total 4.5 tons/day;metal and tin-can waste, which amounts to 1.4 tons/day;and paper waste, which totals 5.9 tons/day. This study highlights the significance of promoting environmental consciousness to effectively shape the attitudes of urban residents toward waste disposal and management. It emphasizes the need for collaboration between authorities and researchers to improve the current waste management system.
文摘This paper introduces an intelligent waste recycling automatic classification system,which integrates sensors,image recognition,and robotic arms to achieve automatic identification and classification of waste.The system monitors the composition and properties of waste in real time through sensors,and uses image recognition technology for precise classification,and the robotic arm is responsible for grabbing and disposing.The design and implementation of the system have important practical significance and application value,and help promote the popularization and standardization of waste classification.This paper details the system s architecture,module division,sensors and recognition technology,robotic arm and grabbing technology,data processing and control system,and testing and optimization process.Experimental results show that the system has efficient waste recycling efficiency and accuracy in practical applications,bringing new development opportunities to the waste recycling industry.
文摘Objective To evaluate the environmental quality of Guiyu, Guangdong impacted by the electronic waste recycling industry. Methods The surface water, ground water and sediment samples taken separately from two sites that recycle E-wastes and other rubbish relevant to the E-waste recycling, and an agricultural area, were analyzed, and the data were used to evaluate the impact of E-waste recycling on the environmental quality of Guiyu based on environmental quality standards in China. Results The concentrations of lead and iron in the surface water samples significantly different in the three locations. The maximum value of lead in the first site was 8 times higher than the threshold of environmental quality standards for surface water. The concentration of iron in polluted sample was 22 times that of the background sample. Manganese and iron also showed a significant difference in ground water samples between the three sites. The amount of iron was 22 times that of the threshold of the quality standard for ground water, and 120 times that of the background sample. Moreover, the results of all the eight heavy metals showed significant differences among the sediment samples. The concentrations of copper, cadmium, nickel, and lead in the polluted samples were above the median benchmarks of National Oceanic and Atmospheric Administration （NOAA）. The copper concentration of 2670 mg/kg was 10 times that of the median benchmark. Conclusion E-waste recycling has led to the severe pollution Guiyu.
文摘Waste pollution is a significant environmental problem worldwide.With the continuous improvement in the living standards of the population and increasing richness of the consumption structure,the amount of domestic waste generated has increased dramatically,and there is an urgent need for further treatment.The rapid development of artificial intelligence has provided an effective solution for automated waste classification.However,the high computational power and complexity of algorithms make convolutional neural networks unsuitable for real-time embedded applications.In this paper,we propose a lightweight network architecture called Focus-RCNet,designed with reference to the sandglass structure of MobileNetV2,which uses deeply separable convolution to extract features from images.The Focus module is introduced to the field of recyclable waste image classification to reduce the dimensionality of features while retaining relevant information.To make the model focus more on waste image features while keeping the number of parameters small,we introduce the SimAM attention mechanism.In addition,knowledge distillation was used to further compress the number of parameters in the model.By training and testing on the TrashNet dataset,the Focus-RCNet model not only achieved an accuracy of 92%but also showed high deployment mobility.
基金financial support of the National High-Tech Research and Development Program of China (No. 2012AA06A118)the Natural Science Foundation of Inner Mongolia (No. 2014MS0521)the Key Science & Technology Development Project of Baotou City (No. 2013Z1016)
文摘To realize the comprehensive utilization of coal-fired industrial solid wastes, a novel high-strength board was prepared from calcium silicate slag, fly ash, and flue gas desulfurization(FGD) gypsum. The changes in mineral phases, chemical structure, and morphology during hydration were investigated by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), and scanning electron microscopy(SEM). A traditional board made from quartz and lime was prepared as a reference. The novel board not only consumes a lot of solid wastes, but also meets the strength requirement of the class-five calcium silicate board according to the Chinese Standard JC/T 564.2—2008. Microanalysis showed that hydrated calcium silicate gel(C-S-H(I)), ettringite, tobermorite, and xonotlite were successively generated in the novel board by synergistic hydration of the mixed solid wastes. The board strength was improved by the formation of tobermorite and xonotlite but decreased by unhydrated quartz. It was demonstrated that quartz was not completely hydrated in the traditional board. As a result, the flexural strength of the traditional board was much lower than that of the novel board.
基金supported by the National Natural Science Foundation of China(No.42177358)the Natural Science Foundation of Guangdong Province(No.2023A1515011232)。
文摘Massive waste aluminum scraps produced from the spent aluminum products have high electron capacity and can be recycled as an attractive alternative to materials based on zerovalent iron(Fe^(0))for the removal of oxidative contaminants from wastewater.This study thus proposed an approach to fabricate micron-sized sulfidated zero-valent iron-aluminum particles(S-Al^(0)@Fe^(0))with high reactivity,electron selectivity and capacity using recycled waste aluminum scraps.S-Al^(0)@Fe^(0)with a three-layer structure contained zero-valent aluminum(Al^(0))core,Fe^(0) middle layer and iron sulfide(FeS)shell.The rates of chromate(Cr(Ⅵ))removal by S-Al^(0)@Fe^(0)at pH 5.0-9.0 were 1.6-5.9 times greater than that by sulfidated zero-valent iron(S-Fe^(0)).The Cr(Ⅵ)removal capacity of S-Al^(0)@Fe^(0)was 8.2-,11.3-and 46.9-fold greater than those of S-Fe0,zero-valent iron-aluminum(Al^(0)-Fe^(0))and Fe^(0),respectively.The chemical cost of S-Al^(0)@Fe^(0) for the equivalent Cr(Ⅵ)removal was 78.5%lower than that of S-Fe^(0).Negligible release of soluble aluminum during the Cr(Ⅵ)removal was observed.The significant enhancement in the reactivity and capacity of S-Al^(0)@Fe^(0)was partially ascribed to the higher reactivity and electron density of the Al0core than Fe^(0).More importantly,S-Al^(0)@Fe^(0) served as an electric cell to harness the persistent and selective electron transfer from the Al^(0)-Fe^(0) core to Cr(Ⅵ)at the surface via coupling Fe^(0)-Fe^(2+)-Fe^(3+)redox cycles,resulting in a higher electron utilization efficiency.Therefore,S-Al^(0)@Fe^(0) fabricated using recycled waste aluminum scraps can be a cost-effective and environmentally-friendly alternative to S-Fe^(0) for the enhanced removal of oxidative contaminants in industrial wastewater.
文摘In a beamhouse,liming plays a key role in the removal of hair/wool and epidermis,but problems are created when waste liming sludge is discharged to the environment.The treatment of tannery wastewater is another major challenge to the industry.In this study,thermally-activated biochars derived from liming sludge were studied for their effective adsorption of chromium(Cr)from the tannery wastewater.The thermally activated biochars(B500,B550,B600,and B650)were prepared at different temperatures from the liming sludge.Their characteristics before and after the treatment were investigated using Fourier transform infrared spectroscopy,energy dispersive X-ray spectroscopy,Bru-nauer-Emmett-Teller,and scanning electron microscopy analyses.The related functional groups(C-H,O-H,C-N,and=C-O)and chromium adsorption capacity were determined according to the surface morphology,element contents(C,O,Ca,Na,Al,Mg,and Si),surface area(5.8-9.2 m^(2)/g),pore size(5.22-5.53 nm),and particle size(652-1034 nm)of the experimental biochars.The biochar originated at 600°C from the tannery liming sludge(B600)had a greater surface area with a chromium adsorption capacity of 99.8%in comparison to B500,B550,and B650 biochars.This study developed an innovative way of utilizing liming sludge waste to minimize the pollution load and wastewater treatment cost in the tannery industry.
基金financially supported by Yildiz Technical University Scientific Research Projects Coordination Department (No. 2011-07-02-KAP02)
文摘The increasing consumption of plastics inevitably results in increasing amounts of waste plastics. Because of their long degradation periods, these wastes negatively affect the natural environment. Numerous studies have been conducted to recycle and eliminate waste plastics. The potential for recycling waste plastics in the iron and steel industry has been underestimated; the high C and H contents of plastics may make them suitable as alternative reductants in the reduction process of iron ore. This study aims to substitute plastic wastes for coal in reduction melting process and to investigate their performance during reduction at high temperature. We used a common type of waste plastic, polyethylene terephthalate （PET）, because of its high carbon and hydrogen contents. Composite pellets containing PET wastes, coke, and magnetite iron ore were reduced at selected temperatures of 1400 and 1450℃ for reduction time from 2 to 10 min to investigate the reduction melting behavior of these pellets. The results showed that an increased temperature and reduction time increased the reduction ratio of the pellets. The optimum experimental conditions for obtaining metallic iron （iron nuggets） were reduction at 1450℃ for 10 min using composite pellets containing 60% PET and 40% coke.
文摘In this article, based on the analysis of the current environmental situation in Russia and other countries, as well as of the problem of recycling plastic waste in the Russian Federation （RF）, the authors clearly show the effectiveness of investments in the processing of polymer debris on the example of polyethylene terephthalate （PET） waste （granulates, flakes）. In the frame of case study of social and environmental investment project on creating enterprise that will engage in collection, recycling, and sale of the consumer PET packaging in Russia, the authors demonstrate the economic feasibility of the creation of such kind of enterprises taking into account market conditions and the features of the existing system of taxation in Russia. The realization of the project will also help in solving environmental and social problems of large cities, in particular, will create more jobs （in terms of 6% of unemployment rate in the country）. The study also identifies the main obstacles in the way of waste recycling in Russia, and the recommendations for improvement of normative base of the industry are given.
文摘The main driver for recycling cable wastes is the high value of the conducting metal, while the plastic with its lower value is often neglected. New improved cable plastic recycling routes can provide both economic and environmental incentive to cable producers for moving up the “cable plastic waste ladder”. Cradle-to-gate life cycle assessment, LCA, of the waste management of the cable scrap is suggested and explained as a method to analyze the pros and cons of different cable scrap recycling options at hand. Economic and environmental data about different recycling processes and other relevant processes and materials are given. Cable producers can use this data and method to assess the way they deal with the cable plastic waste today and compare it with available alternatives and thus illuminate the improvement potential of recycling cable plastic waste both in an environmental and in an economic sense. The methodology applied consists of: cradle-to-gate LCA for waste material to a recycled material (recyclate);quantifying the climate impact for each step on the waste ladder for the specific waste material;the use of economic and climate impact data in parallel;climate impact presented as a span to portray the insecurities related to which material the waste will replace;and possibilities for do-it-yourself calculations. Potentially, the methodology can be useful also for other waste materials in the future.
基金financially supported by the National Key Technology R&D Program of China (Nos.2012BAC02B01,2012BAC12B05,2011BAE13B07,and 2011BAC10B02)the National High-Tech Research and Development Program of China (No.2012AA063202)+2 种基金the National Natural Science Foundation of China (Nos.51174247 and 51004011)the Science and Technology Program of Guangdong Province,China (No.2010A030200003)the Ph.D. Programs Foundation of the Ministry of Education of China (No.2010000612003)
文摘Oily cold rolling mill （CRM） sludge is one of metallurgical industry solid wastes. The recycle of these wastes can not only protect the environment but also permit their reutilization. In this research, a new process of ＂hydrometallurgical treatment ＋ hydrothermal synthesis＂ was investigated for the combined recovery of iron and organic materials from oily CRM sludge. Hydrometallurgical treatment, mainly including acid leaching, centrifugal separation, neutralization reaction, oxidizing, and preparation of hydrothermal reaction precursor, was first utilized for processing the sludge. Then, micaceous iron oxide （MIO） pigment powders were prepared through hydrothermal reaction of the obtained precursor in alkaline media. The separated organic materials can be used for fuel or chemical feedstock. The quality of the prepared MIO pigments is in accordance with the standards of MIO pigments for paints （ISO 10601-2007）. This clean, effective, and economical technology offers a new way to recycle oily CRM sludge.
文摘The purpose of this study is to analyze the household waste reduction effect of sorted collection of recyclable waste in Japan using a panel data analysis, which considers time-series and cross-section data simultaneously. Also, the study shows the effect of the type of sorted items on the quantity of household waste disposed. We used the data attained from 103 cities recorded over three years, and applied the quantity of total waste disposed, the quantity of combustible waste, the quantity of other waste （waste excluding combustible and recyclable waste）, and the quantity of combustible plus other waste as objective variables, respectively, in the models. The result suggests that when the number of sorted items is increased marginally, the quantity of household waste decreases by about 0.5%-3.3% or 1.28-4.17 grams per capita per day. In addition, it is shown that sorting out white trays is effective in reducing the quantity of combustible waste. Sorting out paper containers and packages is also effective in reducing the quantity of other waste and combustible plus other waste.
文摘This study was designed to evaluate the sensory quality indices, freshness assessment and safety of eating Nile tilapia fed recycled food waste materials [food industry waste （FIW） and soy sauce waste （SSW）] for 32 weeks using K values, IMP content and microbial viable cell count. Five experimental diets were formulated at 0% and 20%-22% inclusion level of recycled food wastes. The diets were designated as D 1： 0% of recycled food waste, D2： 20% inclusion of FIW, D3： 20% inclusion of FIW and SSW, D4： 20% inclusion of FIW and tryptophan, and D5： 22% inclusion of SSW. The result from the body composition shows that D I had higher carcass protein, while D3 had the highest lipid content and there was no significant difference in the carcass moisture and ash contents among all treatments. The results of microbial viable cell counts showed that no significant differences were observed among the dietary treatments and all the fish fed experimental diets still remained fresh four days after refrigerated storage at 5 ~C. In addition, no significant differences were noted among the K value concentrations of all the fish fed the experimental diets. From the result of this study, we concluded that using 20% inclusion of recycled food waste materials （FIW and SSW） in the diet of tilapia had no negative effect on the flesh of the fish; hence, recycled food waste could be a good alternative ingredient to aquaculture.
基金supported by Taishan Scholar Constructive Engineering Foundation(No.tsqn202103079)the Talent Start-up Foundation of Qingdao University of Science and Technology(No.202203870).
文摘Recently great effort s have been focused on designing high-performance microwave absorbers using sustainable biomass resources,but there remains a lack of green and efficient fabrication methods.Herein,inspired by natural porous character of biomass waste,we demonstrated a green one-step route to convert waste coffee grounds into porous C/Fe hybrids,and further explored their potential applications for broadband and high-efficiency microwave absorption.In this design,the WCG-20-750(incorporated 20 wt%Fe(C_(5)H_(7)O_(2))_(3)catalyst and carbonized at 750℃)exhibited porous microstructure with the highest char yield of 55.45 wt%.Furthermore,the as-prepared C/Fe hybrids from WCG-20-750 displayed excellent microwave absorption performances.Typically,the minimum reflection loss(RL_(min))reached to-52.86 dB and the widest effective absorption bandwidth(EAB)was 6.40 GHz at the thickness of 3.0 mm.This work provides an economically viable and environmentally friendly strategy to convert biomass wastes into value-added microwave absorbers,ultimately making contributions to the upcycling of renewable biomass resources and the fostering of sustainable environment.
文摘The filler-bitumen interaction mechanism is one of the most essential phases for comprehending the asphalt mixture's performance.However,despite numerous studies,in-depth knowledge of filler-bitumen reciprocity at a microscale level is yet to be ascertained.The goal of this research is to gain a better understanding of the fillerbitumen microscale interaction in terms of the synergy and coaction between the physicochemical and rheological performance of mastics due to filler inclusions.The rheological properties of two sustainable mastics,dolomite powder(DP)and lime kiln dust(LKD),together with a neat PEN 60/70 binder,were analysed based on a temperature sweep at elevated temperature conditions.Meanwhile,frequency sweep and multiple stress creep recovery(MSCR)tests were also conducted at pavement serviceability temperature using the dynamic shear rheometer(DSR).Physicochemical tests using a scanning electron microscope(SEM)and energy dispersive X-rays(EDX)were conducted to analyse the impact of parameters such as particle shape,grain size,texture,and chemical compositions.The DSR test results showcased how the incorporation of fillers in asphalt binder considerably improved the performance of the binder in terms of rutting and fatigue.Likewise,its strain and nonrecoverable compliance parameters were substantially reduced at higher filler and binder concentrations.Physical filler attributes of low rigden voids(R.V),high fineness modulus(FM),and high specific surface area(SSA)led to greater interfacial stiffness and elasticity in LKD mastics compared to DP mastics at different loading frequencies and temperature levels.The SEM/EDX results also indicated that the elemental calcium and carbon composition of each filler component,together with its grain morphology,strongly influenced its rheological performance.
基金supported by the National Natural Science Foundation of China(No.51834001).
文摘The green disposal of tailings solid waste is a problem to be solved in mine production.Cemented tailings filling stoping method can realize the dual goals of solid waste resource utilization and mined-out area reduction.However,the volume of the mined-out area of the open-pit method is larger than the filling capacity,resulting in the complex stratification of the underground backfill,and the strength of the backfill cannot meet the requirements.In this paper,according to the delamination situation,the specimens of horizontal and inclination angle layered cemented tailings backfill(LCTB)is made for a uniaxial compression test,and the failure process of delamination backfill is reduced by PFC.The results show that the corresponding reduction factorφof horizontal LCTB is 0.560–0.932,and the correspondingφvalue of inclination angle LCTB is 0.338–0.772.The failure mode of backfill in different layers is mainly manifested as a tensile failure.The PFC numerical simulation results are consistent with laboratory test results,which verifies the correctness of backfill failure.The research results provide a reliable theoretical basis for the strength design of backfill in goaf,which is of great significance for solid waste utilization and environmental protection.
基金This work was supported by the National Natural Science Foundation of China(51834001,52104129)a project supported by the China Postdoctoral Science Foundation(2020M672226,2022T150195)Key Laboratory of Mine Ecological Effects and Systematic Restoration,Ministry of Natural Resources,Open Fund(MEER-2022-09).
文摘In order to improve the comprehensive utilization rate of highfines sand(HFS)produced by the mine,full solid waste shotcrete(HFS-BFRS)was prepared with HFS asfine aggregate in cooperation with basaltfiber(BF).The strength growth characteristics of HFS-BFRS were analyzed.And thefitting equation of compressive strength growth characteristics of HFS-BFRS under the synergistic effect of multiple factors was given.And based on the orthogonal experimental method,the effects on the compressive strength,splitting tensile strength andflex-ural strength of HFS-BFRS under the action of different levels of influencing factors were investigated.The effect of three factors on the mechanical properties of HFS-BFRS,3,and 28 d,respectively,was revealed by choosing the colloidal sand ratio(C/H),basaltfiber volume fraction(BF Vol)and naphthalene high-efficiency water reducing agent(FDN)as the design variables,combined with indoor tests and theoretical analysis.The results show that the sensitivity of the three factors on compressive strength andflexural strength is C/H>FDN>BF Vol,and split-ting tensile strength is BF Vol>FDN>C/H.Finally,thefitting ratio of HFS-BFRS was optimized by the factor index method,and the rationality was verified by thefield test.For thefluidity of HFS-BFRS,the slump can be improved by 139%under the action of 1.2%FDN,which guarantees the pump-ability of HFS-BFRS.
