In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation.The dynami...In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation.The dynamic response of the prototype slopes were studied in laboratory with the consideration of law of similitude. The initiation failure was observed in the rock slope model with a counter-tilt thin-weak intercalation firstly, not in the slope model with a horizontal thin-weak intercalation. Furthermore, it was interesting that the fracture site is shifted from crest top to the slope surface near the weak intercalation, which is different with the location of failure position in a normal layered slope. We also discussed the effect of the dip angle and the thickness of weak intercalation on the failure mechanism and instability mode of the layered rock slope. From the experimental result, it was noted that the stability of the slope with a counter-tilt weak intercalation could be worse than that of the other slopes under seismic excitation. The findings showed the difference of failure in slopes with a horizontal and counter weak intercalation, and implicated the further evaluation of failure of layered slopes caused by seismic loads.展开更多
This study discussed how cavity gas pressure affects the stability of rock mass with fractures under well controlled laboratory experiments.Suddenly-created void space created and the induced gas pressures have been t...This study discussed how cavity gas pressure affects the stability of rock mass with fractures under well controlled laboratory experiments.Suddenly-created void space created and the induced gas pressures have been the focus of active researches because they are associated with fast movement of large-scale landslides.A shaking table experiment was set up to mimic weak-intercalated rock slope under seismic loads.Excessive cavity gas pressure would be produced in weak spots upon a sudden vibration load.The drastically elevated gas pressure is believed to be responsible for the creation of cavities surrounding the tension fracture.With dissipation of the excessive cavity gas pressure,the fractures are in unbounded closed-state.This observation explains that the slope body would be split and loosened under several aftershocks,and with the expanding of the cracks,the slope failure eventually occurred.The research of the mechanism of cavity gas pressure could provide a novel insight into the formation mechanism of landslides under seismic load and has implications for the disaster prevention and control theory for the slope stability evaluation.展开更多
The cause and mechanism of fly rock in geological condition of weak intercalation are analyzed.According to the features of fly rock caused by weak intercalation,the differences of fly rock caused in weak intercalatio...The cause and mechanism of fly rock in geological condition of weak intercalation are analyzed.According to the features of fly rock caused by weak intercalation,the differences of fly rock caused in weak intercalation and general condition are distinguished.Specific to complicated circumstance of weak intercalation and town,the control measures of fly rock are given.With project examples,the control measures are scientific and rational,and have important project value.展开更多
In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were ana...In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were analyzed via X-ray diffraction after dry-wet cycles. By combining in-situ SEM and digital image processing(DIP), the damage evolution process and damage characteristic parameters of each stage were obtained. The experimental results indicate that the hydration and dissolution of minerals can not be a determinant factor in structure damage. The micro-structural damage is due to disintegration of mineral aggregates, leading to changes in the number and size of cracks and pores. The damage degree of specimens is related to its initial structure, and the micro-structural damage intensifies and finally tends to stabilize with cycle times increased.展开更多
The mechanical behavior of the joints inside a loess layer is greatly important in weak intercalation studies owing to its involvement in a wide range of landslides in the loess region in China.The shear behavior of t...The mechanical behavior of the joints inside a loess layer is greatly important in weak intercalation studies owing to its involvement in a wide range of landslides in the loess region in China.The shear behavior of the joints in the loess stratum during direct shear and cyclic loadings was investigated using the PFC2D discrete element software.Loess mudstone and mudstone with weak intercalated layer materials were subjected to direct testing,and cyclic shear tests were conducted with consideration to the influence of normal stress and shear velocity.The macroscopic properties and damage patterns were obtained for six numerical configurations;namely,loess-weathered mudstone with 0°,10°,and-10°joints and weathered mudstone with 0°,10°,and-10°weak intercalated layers.The numerical test results revealed that,in the direct shear tests,the shear stress and shear displacement of the samples increased with the normal stress.In the cyclic shear tests with a total cycle number N=20,the shear stress-shear strain curve of the six different configurations exhibited a hysteresis loop.The numerical tests also revealed that,under cyclic shear,the normal stress and shear velocity affected the shear strength.The degree of damage increased as the shear velocity decreased from 0.1 mm/s to 0.005 mm/s for all six numerical configurations.Compared with the damage pattern of the direct shear tests,the damage of the cyclic shear tests mainly comprised shear cracks and fractures,some shaking consolidation settlement and fewer shear strain occurred around the joints.In the direct shear tests,more compression cracks and fractures occurred in the samples.The damage mainly developed along the joints,and shearing-off damage occurred.The results obtained by this study further elucidate the failure mechanism and microscopic damage response of the joints in the loess stratum in Northwest China.展开更多
The cutting slopes in soft rock of redbed appeared in Yichang-Badong highway often suffer from the instability along weak intercalations, so the creep behaviors of weak intercalated soils are crucially important for t...The cutting slopes in soft rock of redbed appeared in Yichang-Badong highway often suffer from the instability along weak intercalations, so the creep behaviors of weak intercalated soils are crucially important for the stability of cutting slopes. Because the deformation of weak intercalated soils is significantly affected by water content due to the strong water sensitivity, it is necessary to study the influence of matric suction on the creep behaviors of weak intercalated soils. In order to find out the unsaturated creep characters of weak intercalated soils, a GDS unsaturated triaxial apparatus was used. Then the triaxial creep experiments on weak intercalated soil samples under varying matric suction were conducted to obtain the unsaturated creep curves. The results show that the weak intercalated soils have obvious creep behaviors, and the creep strain is in nonlinear relationship with stress and time. When the matric suction is constant, a larger deviator stress will lead to a larger creep strain; When the deviator stress is constant, a smaller matric suction will lead to a larger creep strain. Based on the Mesri creep model, an improved creep model for weak intercalated soils under varying matric suction was established, in which the relationship of stress-strain was expressed with a hyperbolic function, and the relationship of strain-time was expressed with power functions in stages. Then an unsaturated creep model including stress-matric suction-strain-time for weak intercalated soils was established based on the power function relationship between matric suction and Ed(a parameter of the improved creep model). The comparison of the calculated values of creep model and the experimental values shows that the creep behaviors of weak intercalated soils can be predicted by the unsaturated creep model by and large.展开更多
The basics of mining landslides were first summed up based on the analysis ofactual materials by the application of mining subsidence and landslide theories. Further,the mechanism of along-layer landslide by mining wa...The basics of mining landslides were first summed up based on the analysis ofactual materials by the application of mining subsidence and landslide theories. Further,the mechanism of along-layer landslide by mining was studied with the example of theXiangshan mining landslide at Hancheng, Shaanxi Province. Meanwhile, the state ofstress, and the mechanism of deformation and destruction of the Xiangshan mining slopewere analyzed by the Finite Element Method.展开更多
基金financially supported by the Research and Innovation Team of Chengdu University of TechnologyProject of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Grant No. SKLGP2013Z002)
文摘In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation.The dynamic response of the prototype slopes were studied in laboratory with the consideration of law of similitude. The initiation failure was observed in the rock slope model with a counter-tilt thin-weak intercalation firstly, not in the slope model with a horizontal thin-weak intercalation. Furthermore, it was interesting that the fracture site is shifted from crest top to the slope surface near the weak intercalation, which is different with the location of failure position in a normal layered slope. We also discussed the effect of the dip angle and the thickness of weak intercalation on the failure mechanism and instability mode of the layered rock slope. From the experimental result, it was noted that the stability of the slope with a counter-tilt weak intercalation could be worse than that of the other slopes under seismic excitation. The findings showed the difference of failure in slopes with a horizontal and counter weak intercalation, and implicated the further evaluation of failure of layered slopes caused by seismic loads.
基金financially supported by Project of the National Natural Science Foundation of China (Grant No.41072230)Project of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (No.SKLGP2012Z008)Project of Chengdu University of Technology Research and Innovation Team
文摘This study discussed how cavity gas pressure affects the stability of rock mass with fractures under well controlled laboratory experiments.Suddenly-created void space created and the induced gas pressures have been the focus of active researches because they are associated with fast movement of large-scale landslides.A shaking table experiment was set up to mimic weak-intercalated rock slope under seismic loads.Excessive cavity gas pressure would be produced in weak spots upon a sudden vibration load.The drastically elevated gas pressure is believed to be responsible for the creation of cavities surrounding the tension fracture.With dissipation of the excessive cavity gas pressure,the fractures are in unbounded closed-state.This observation explains that the slope body would be split and loosened under several aftershocks,and with the expanding of the cracks,the slope failure eventually occurred.The research of the mechanism of cavity gas pressure could provide a novel insight into the formation mechanism of landslides under seismic load and has implications for the disaster prevention and control theory for the slope stability evaluation.
文摘The cause and mechanism of fly rock in geological condition of weak intercalation are analyzed.According to the features of fly rock caused by weak intercalation,the differences of fly rock caused in weak intercalation and general condition are distinguished.Specific to complicated circumstance of weak intercalation and town,the control measures of fly rock are given.With project examples,the control measures are scientific and rational,and have important project value.
基金Funded by the National Natural Science Foundation of China(No.51574201)the Research and Innovation Team of Provincial U niversities in Sichuan(18TD0014)the Excellent Youth Foundat ion of Sichuan Scientific Committee(2019JDJQ0037)
文摘In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were analyzed via X-ray diffraction after dry-wet cycles. By combining in-situ SEM and digital image processing(DIP), the damage evolution process and damage characteristic parameters of each stage were obtained. The experimental results indicate that the hydration and dissolution of minerals can not be a determinant factor in structure damage. The micro-structural damage is due to disintegration of mineral aggregates, leading to changes in the number and size of cracks and pores. The damage degree of specimens is related to its initial structure, and the micro-structural damage intensifies and finally tends to stabilize with cycle times increased.
基金sponsored by National Natural Science Foundation of China(No.41902269)Chinese Universities Scientific Fund(2020TC095)。
文摘The mechanical behavior of the joints inside a loess layer is greatly important in weak intercalation studies owing to its involvement in a wide range of landslides in the loess region in China.The shear behavior of the joints in the loess stratum during direct shear and cyclic loadings was investigated using the PFC2D discrete element software.Loess mudstone and mudstone with weak intercalated layer materials were subjected to direct testing,and cyclic shear tests were conducted with consideration to the influence of normal stress and shear velocity.The macroscopic properties and damage patterns were obtained for six numerical configurations;namely,loess-weathered mudstone with 0°,10°,and-10°joints and weathered mudstone with 0°,10°,and-10°weak intercalated layers.The numerical test results revealed that,in the direct shear tests,the shear stress and shear displacement of the samples increased with the normal stress.In the cyclic shear tests with a total cycle number N=20,the shear stress-shear strain curve of the six different configurations exhibited a hysteresis loop.The numerical tests also revealed that,under cyclic shear,the normal stress and shear velocity affected the shear strength.The degree of damage increased as the shear velocity decreased from 0.1 mm/s to 0.005 mm/s for all six numerical configurations.Compared with the damage pattern of the direct shear tests,the damage of the cyclic shear tests mainly comprised shear cracks and fractures,some shaking consolidation settlement and fewer shear strain occurred around the joints.In the direct shear tests,more compression cracks and fractures occurred in the samples.The damage mainly developed along the joints,and shearing-off damage occurred.The results obtained by this study further elucidate the failure mechanism and microscopic damage response of the joints in the loess stratum in Northwest China.
基金supported by Natural Science Foundation of China (Grant No. 41502278)National Natural Science Foundation of China (Grant No. 41272377)+1 种基金China Postdoctoral Science Foundation funded project (2015M582588)Science & Technology Project of Hubei Traffic and Transport Office of China (2011)
文摘The cutting slopes in soft rock of redbed appeared in Yichang-Badong highway often suffer from the instability along weak intercalations, so the creep behaviors of weak intercalated soils are crucially important for the stability of cutting slopes. Because the deformation of weak intercalated soils is significantly affected by water content due to the strong water sensitivity, it is necessary to study the influence of matric suction on the creep behaviors of weak intercalated soils. In order to find out the unsaturated creep characters of weak intercalated soils, a GDS unsaturated triaxial apparatus was used. Then the triaxial creep experiments on weak intercalated soil samples under varying matric suction were conducted to obtain the unsaturated creep curves. The results show that the weak intercalated soils have obvious creep behaviors, and the creep strain is in nonlinear relationship with stress and time. When the matric suction is constant, a larger deviator stress will lead to a larger creep strain; When the deviator stress is constant, a smaller matric suction will lead to a larger creep strain. Based on the Mesri creep model, an improved creep model for weak intercalated soils under varying matric suction was established, in which the relationship of stress-strain was expressed with a hyperbolic function, and the relationship of strain-time was expressed with power functions in stages. Then an unsaturated creep model including stress-matric suction-strain-time for weak intercalated soils was established based on the power function relationship between matric suction and Ed(a parameter of the improved creep model). The comparison of the calculated values of creep model and the experimental values shows that the creep behaviors of weak intercalated soils can be predicted by the unsaturated creep model by and large.
基金Supported by the Natural Science Foundation of Shaanxi Province,China (SJ08D01)
文摘The basics of mining landslides were first summed up based on the analysis ofactual materials by the application of mining subsidence and landslide theories. Further,the mechanism of along-layer landslide by mining was studied with the example of theXiangshan mining landslide at Hancheng, Shaanxi Province. Meanwhile, the state ofstress, and the mechanism of deformation and destruction of the Xiangshan mining slopewere analyzed by the Finite Element Method.
